3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
2349 commits 3 branches 78 tags 40 MiB
Commit graph

1799 commits

Author SHA1 Message Date
Marek Bel
68ffa95aa9 Fix axis self-test progress visualization. 2019-01-24 21:06:03 +01:00
Marek Bel
1c4f3259ea Increase heater check minimum expected temperature rises. 
Bed increased from 3 to 10 K.
Nozzle increased from 10 to 30 K.

Measured rises with my MK3 printer:
Bed 26K,
Nozzle 73K.
 2019-01-24 21:02:04 +01:00
Marek Bel
305598d7f6 Fix bed / nozzle test order and progress bar. 
Known limitation:
Z progress shown in bed progress.
 2019-01-24 20:03:37 +01:00
Marek Bel
22859800f0 Rearrange tests. Move hot end test to the end, to spare time in IR sensor test. 
Known problems, hot end and bed is swapped. Bed progress indicator is painted to X axis test.
 2019-01-24 19:22:36 +01:00
Marek Bel
1d71c1a5d1 Update IR sensor selftest progress bar more frequently. 2019-01-22 19:02:42 +01:00
Marek Bel
97a4623800 Fix lcd_selftest_screen for small _progress_scale. 2019-01-22 19:01:55 +01:00
Marek Bel
9cda0b69b8 Update IR sensor selftest progress bar. 2019-01-22 18:23:00 +01:00
Marek Bel
3ff8a7c740 Unload filament by MMU unit in selftest_irsensor(). 
Known limitation:
If filament was not loaded to nozzle it is sticked completely out of MMU. To be fixed in MMU, as this problem can be reproduced also from printer menu - unload filament.
 2019-01-22 14:54:06 +01:00
Marek Bel
c371a5ea65 Document. 2019-01-22 14:05:08 +01:00
Marek Bel
a92d9c782b Add IR sensor test. 2019-01-22 11:29:55 +01:00
Marek Bel
f292a6ca7a Refactor filament sensor selftest call. 2019-01-21 21:39:38 +01:00
PavelSindler
ca8cb3784c
Merge pull request #1456 from mkbel/Fix_load_fail_current 
Do not disable motor currents when print is paused due to mmu load er…
 2019-01-16 12:49:38 +01:00
Marek Bel
3af1f81269 Do not disable motor currents when print is paused due to mmu load error. 2019-01-15 21:40:02 +01:00
Marek Bel
2db42c8577 Merge branch 'MK3' into auto_deplete_2 2019-01-07 21:39:46 +01:00
Marek Bel
c080b899c3 Change filament number in T command to alternative if depleted and lcd_autoDepleteEnabled(). 2019-01-04 22:32:48 +01:00
PavelSindler
7946cd7250 eeprom write nr. limitation 2019-01-04 22:23:11 +01:00
PavelSindler
02262ff7ca mmu load fail: possibility to unload/eject filament from menu 2019-01-04 21:37:19 +01:00
Marek Bel
d89c03a0f1 Documentation. 2019-01-04 21:26:13 +01:00
Marek Bel
1a219b2372 Mark filament as depleted when detected by MMUv2 FINDA. Do not try to load filament if it is marked depleted, load next filament instead. Force user action when all filaments are marked as depleted. 2019-01-04 21:11:42 +01:00
PavelSindler
b7b7e9387f do resend attempts before pausing print (mmu needs attention state) so the print would not be paused if T-code is not received correctly by mmu; prevent infinite loading 2019-01-04 21:07:52 +01:00
Marek Bel
a7128ffa04 Comment. 2019-01-04 19:56:15 +01:00
Marek Bel
92ff284f82 Remove redundant code. 2019-01-04 19:35:33 +01:00
Marek Bel
360a977520 Fix allDepleted(). Add tests. 2019-01-04 19:34:42 +01:00
Marek Bel
a309ec1b0b Add filament auto deplete engine for multi-material prints with MMUv2. 2019-01-03 22:58:25 +01:00
PavelSindler
3ab1daf722 MMU_DEBUG temporarily enabled 2018-12-21 23:17:32 +01:00
PavelSindler
88441f7f2f scan power failures fix 2018-12-21 23:07:39 +01:00
PavelSindler
6ba86acebc send A (abort) command to mmu only when loading phase of T-code 2018-12-21 22:33:01 +01:00
PavelSindler
e36e58f385 show sensor on/off temporarily changed to unlocalized strings 2018-12-21 21:28:57 +01:00
PavelSindler
688d4a8a82 missing defines in variant files 2018-12-21 21:05:54 +01:00
PavelSindler
ba57986b72 merge changes from upstream 2018-12-21 20:58:38 +01:00
PavelSindler
5462d451e1 show power failures in fail stats menu, shorter load to nozzle if idler sensor detected 2018-12-21 20:56:45 +01:00
PavelSindler
d1ca73597b
Merge pull request #1412 from XPila/V3_5 
Repeat last MMU command after timeout
 2018-12-21 20:53:24 +01:00
PavelSindler
d292e877df load to nozzle shortened, sensor menu moved to support 2018-12-21 18:51:13 +01:00
PavelSindler
3c64bad1cb initial version which works on old and new hw, initial version of idler sensor detection 2018-12-21 17:12:16 +01:00
PavelSindler
75523b1497
Merge pull request #1417 from PavelSindler/z_cal_endstops 
version changed
 2018-12-19 20:08:22 +01:00
PavelSindler
acbfe89f04 version changed 2018-12-19 20:07:18 +01:00
PavelSindler
b0fce9122e
Merge pull request #1416 from PavelSindler/z_cal_endstops 
Z cal endstops and stop paused print fix
 2018-12-19 19:46:27 +01:00
Robert Pelnar
f79137898a Fix - move down after calibrate Z (PFW718) 2018-12-19 19:22:03 +01:00
PavelSindler
40fe52202d stop paused print fix: saved_printing set to false when doing stop print 2018-12-19 19:20:09 +01:00
Robert Pelnar
b8c5b6259e Fix - move down after calibrate Z (PFW718) 2018-12-19 14:40:10 +01:00
Robert Pelnar
c69d4aa914 Move 1mm down with disabled endstop after calibrate_z_auto (PFW718) 2018-12-19 13:43:49 +01:00
Robert Pelnar
16e5fb50dd Remove M601 from queue before saving state (prevent infinite loop - PFW713) 2018-12-18 20:39:38 +01:00
Robert Pelnar
34f116b4d9 Move 1mm down with disabled endstop after calibrate_z_auto (PFW718) 2018-12-18 19:57:29 +01:00
PavelSindler
b5430c2968 M600: consume click 2018-12-18 19:10:02 +01:00
Robert Pelnar
75d31fd2cb Repeat last MMU command after timeout 2018-12-18 18:47:54 +01:00
PavelSindler
880163dbcb missing prototypes 2018-12-18 17:38:24 +01:00
PavelSindler
fc5d7e35ef fail stats mmu function definitions 2018-12-18 17:35:41 +01:00
PavelSindler
11ab5dfd36 fail stats menu for mmu defined for MK2.5 version 2018-12-18 17:33:27 +01:00
PavelSindler
4543949cac build without MMU_IDLER_SENSOR_PIN defined 2018-12-18 17:29:44 +01:00
PavelSindler
fc33affbda temporary change 2018-12-18 17:24:29 +01:00