Alessandro Ranellucci
539cde8d7a
Raise the thickness threshold used for generating thin walls. TODO: don't enforce this at the segment level but consider the average thickness of an entire polyline and compare it to the total length. #2910
2015-06-15 17:00:10 +02:00
Alessandro Ranellucci
38a9e32a28
Limit bridge over sparse infill to areas that can absorb such extrudate. #2899
2015-06-13 19:48:46 +02:00
Alessandro Ranellucci
7a34078f5f
Bump version number
2015-06-13 11:42:37 +02:00
Alessandro Ranellucci
4a91ea817a
Releasing 1.2.8
2015-06-09 17:18:43 +02:00
Alessandro Ranellucci
e715974688
Better validation for speeds (prevent 0mm/s travel speed). #2893
2015-06-09 17:15:01 +02:00
Alessandro Ranellucci
911bed827c
Fixed regression in STL parser. #2886
2015-06-09 14:54:52 +02:00
Alessandro Ranellucci
7b65a35519
Always limit volumetric speed with Max Volumetric Speed (not just when using autospeed). #2810
2015-06-02 11:54:38 +02:00
Alessandro Ranellucci
1fcfdf4718
Added a couple full_label values
2015-06-01 23:22:44 +02:00
Alessandro Ranellucci
6095427926
Fix admesh's STL parser in order to make it more tolerant for broken STL files having multiple 'solid' definitions. Still not the ideal STL parser, but handles the cases that were reported so far. #2471 #2842
2015-06-01 19:49:52 +02:00
Alessandro Ranellucci
f14c0e2183
Bugfix: concave starting points were not correctly detected for slice holes. Includes regression test. #2857
2015-06-01 17:55:51 +02:00
Alessandro Ranellucci
fbea32a81c
Prevent writing empty materials to AMF files. Also add a note about material-id = 0 being reserved by AMF spec. #2871
2015-06-01 11:51:00 +02:00
Alessandro Ranellucci
7f70da97b4
New experimental autospeed feature. #2810
2015-05-31 22:04:32 +02:00
Alessandro Ranellucci
13b7316807
Merge branch 'master' into sender
...
Conflicts:
Build.PL
lib/Slic3r/GUI/MainFrame.pm
2015-05-28 18:05:36 +02:00
Alessandro Ranellucci
aa8b6afe8b
Assign color to filaments
2015-05-26 02:01:43 +02:00
Alessandro Ranellucci
a547645e86
Bump version number
2015-05-24 23:29:59 +02:00
Alessandro Ranellucci
249a48d68d
Releasing 1.2.7
2015-05-24 17:39:27 +02:00
Alessandro Ranellucci
31e0fc7f17
Fixes and improvements to thin wall detection. #2829
2015-05-22 01:46:01 +02:00
Alessandro Ranellucci
70ec433e67
Faster (but less precise) implementation of simplify_by_visibility(), since it was the bottleneck of avoid_crossing_perimeters. #2777
2015-05-18 19:28:59 +02:00
Alessandro Ranellucci
97211f35e7
More robust medial axis pruning. #2800
2015-05-13 20:50:30 +02:00
Alessandro Ranellucci
0d01348acc
Use radians everywhere, including ModelInstance::rotation
2015-05-03 18:40:00 +02:00
Alessandro Ranellucci
79ce094e3a
Bugfix: splitting a rotated object resulted in wrong positions. #2772
2015-05-03 18:28:39 +02:00
Alessandro Ranellucci
7d81aee62f
Added the [scale] placeholder. #2791
2015-05-02 21:59:15 +02:00
Alessandro Ranellucci
bf541a1fed
Refactoring in PlaceholderParser
2015-05-02 21:43:22 +02:00
Alessandro Ranellucci
a16dda0885
Bugfix: changes to the resolution config option didn't trigger reslicing. #2795
2015-04-29 19:22:44 +02:00
Alessandro Ranellucci
d6d7880507
Ported Slic3r::Geometry::arrange() to C++/XS
2015-04-29 19:19:07 +02:00
Alessandro Ranellucci
5eb3bc52ef
Ported ModelObject::rotate() and ModelObject::flip() to XS, as well as axes constants
2015-04-16 21:22:04 +02:00
Alessandro Ranellucci
be2f46ca68
Ported Layer::merge_slices() to XS
2015-04-16 20:44:55 +02:00
Alessandro Ranellucci
1f8ef2a63c
Fixed regression introduced by the recent PerimeterGenerator refactoring causing spiral vase not to be correctly skipped on multi-loop layers. Includes regression test. #2761
2015-04-12 20:16:27 +02:00
Alessandro Ranellucci
8654537e55
Use support material layer height for raft layer instead of object layer height. #2723
2015-03-09 19:36:23 +01:00
Alessandro Ranellucci
d8ee9dd5f5
Limit first object layer height correctly when using a larger support material extruder. #2722
2015-03-09 19:27:57 +01:00
Alessandro Ranellucci
6cab5668e3
Restore correct ordering of concentric infill loops, preventing them from being reordered during G-code generation
2015-03-09 18:28:07 +01:00
Alessandro Ranellucci
d2172b4383
Merge branch 'master' into sender
2015-03-06 22:15:43 +01:00
Alessandro Ranellucci
095391d702
When using raft, validate first layer height against support material extruder only instead of taking other extruders into account, thus potentially allowing larger nozzles to be used for it. #2701
2015-03-06 21:35:00 +01:00
Alessandro Ranellucci
722e94513c
Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled
2015-03-06 09:56:58 +01:00
Alessandro Ranellucci
1ab8efba7f
Fixed regression causing random failures in bridge direction detection. #2636
2015-02-27 21:55:02 +01:00
Alessandro Ranellucci
e88cf466fe
A couple notes about infill_only_where_needed
2015-02-23 00:55:00 +01:00
Alessandro Ranellucci
2655f3f816
Better and more robust implementation of infill_only_where_needed
2015-02-23 00:44:51 +01:00
Alessandro Ranellucci
2eca094170
Added failing test case for Clipper regression causing extra points in polyline intersection, thus crash with circular bed shape
2015-02-22 17:03:23 +01:00
Alessandro Ranellucci
edbc11477c
Update to Clipper 6.2.9. Fixes #2639
2015-02-22 15:13:52 +01:00
Alessandro Ranellucci
6413d5dcba
Merge pull request #2630 from lordofhyphens/fix-admesh-warning
...
Fix a warning about unused return value when using freopen in admesh.
2015-02-22 14:48:17 +01:00
Alessandro Ranellucci
ba6ae12635
Change end_program() to postamble()
2015-02-15 17:09:17 +01:00
Alessandro Ranellucci
1180a6d83f
Merge pull request #2508 from strahlex/machinekit-gcode
...
added support Machinekit flavour GCode
2015-02-15 17:00:08 +01:00
Alessandro Ranellucci
8851dc7f23
Added failing test case for upstream Clipper issue 126 (our #2639 )
2015-02-15 16:47:55 +01:00
Alessandro Ranellucci
32b8eb489c
Updated Clipper to 6.2.8. This fixes several minor issues, including infill paths not being trimmed correctly. #2448
2015-02-15 16:10:04 +01:00
Kent Fredric
df5c2a6f11
Remove redundant dep on ExtUtils::Typemap
...
Typemap (Singluar) version 1.00 is essentially identical to Typemaps (Plural)
Typemap is literally a dumb subclass of TypeMaps, and so this
dependency simply gives an extra installation requirement that does
nothing.
2015-02-14 06:44:22 +13:00
Alexander Rössler
cef1494852
Switched to P parameter instead of S for Machinekit flavour MCode commands
2015-02-10 14:22:23 +01:00
Alessandro Ranellucci
a68fed3938
Bump version number
2015-02-09 10:53:55 +01:00
Alexander Rössler
f2fa8cb63f
added end_program() function to GCodeWriter
2015-02-07 12:36:29 +01:00
Alexander Rössler
32eff40422
added retract and unretract command for Machinekit flavour
2015-02-06 19:16:57 +01:00
Alexander Rössler
d35226b889
added support Machinekit flavour GCode
2015-02-06 18:48:46 +01:00
Joseph Lenox
102785d154
Fix a warning about unused return value when using freopen in admesh. Added another NULL check for safety.
2015-02-05 00:58:27 -06:00
Alessandro Ranellucci
73eb11b395
Releasing 1.2.6
2015-02-01 15:47:29 +01:00
Alessandro Ranellucci
3ae6f2630e
Merge branch 'master' into sender
...
Conflicts:
Build.PL
2015-02-01 14:07:32 +01:00
Alessandro Ranellucci
bb3bf28e59
Ported prepare_fill_surfaces() to XS/C++
2015-02-01 12:43:58 +01:00
Alessandro Ranellucci
07cd25d0ec
New option for customization of infill/perimeters overlap. #2459
2015-02-01 12:08:25 +01:00
Alessandro Ranellucci
84eb37e218
Typo in previous commit
2015-01-31 11:57:18 +01:00
Alessandro Ranellucci
62e418d0fc
Modernize some defaults
2015-01-31 11:38:17 +01:00
Alessandro Ranellucci
059b00a829
New --before-layer-change option and new layer_z placeholder. #2602
2015-01-30 20:08:00 +01:00
Alessandro Ranellucci
8605969dc5
Don't output slic3r:z attribute in SVG for raft layers
2015-01-30 18:45:30 +01:00
Alessandro Ranellucci
e2b1b52679
Added a new Slic3r::Geometry::simplify_polygons() function
2015-01-30 18:33:20 +01:00
Alessandro Ranellucci
9ad5d9bb3d
Fixed minor issue in 3D preview causing single-line toolpaths to miss the cap on one endpoint
2015-01-28 23:35:48 +01:00
Alessandro Ranellucci
7652abdf8d
Merge pull request #2595 from xdissent/deserialize-points
...
Use std::getline to deserialize point list coords, fixes #2318
2015-01-28 21:02:05 +01:00
Greg Thornton
b0b9c17c23
Use std::getline to deserialize point list coords, fixes #2318
2015-01-28 09:08:50 -06:00
Alessandro Ranellucci
b1f1893481
Bugfix: tangent horizontal mesh surfaces were not included in slices under rare circumstances, generating almost invalid polygons that confused Clipper and caused skipped layers. Includes regression test
2015-01-28 13:00:38 +01:00
Alessandro Ranellucci
8a5a0b6726
Minor optimization in TriangleMesh code
2015-01-25 17:30:55 +01:00
Alessandro Ranellucci
c264969962
Bugfix: crash when rendering lines with zero length in 3D preview. #2569
2015-01-25 15:21:45 +01:00
Alessandro Ranellucci
a5c0ffe963
Faster loading of 3D preview and much less memory used
2015-01-24 23:35:29 +01:00
Alessandro Ranellucci
8791f5a493
Cleanup of some method signatures and of XS return types
2015-01-19 18:53:04 +01:00
Alessandro Ranellucci
7b980c1dc9
New option for vertical distance between object and support material, with special handling of the 0 case that disabled bridge flow/speed in order to allow for soluble material. #2491 #2272 #2069 #1942 #2435 #1703
2015-01-19 09:52:24 +01:00
Alessandro Ranellucci
9f0283f808
Minor issue when dealing with files with empty layers at bottom. #2553
2015-01-18 12:35:05 +01:00
Alessandro Ranellucci
4696b46475
Clarified tooltip for First Layer Extrusion Width. #2543
2015-01-18 11:42:19 +01:00
Alessandro Ranellucci
b646b5c98a
Revert "Updated Clipper to 6.2.7"
...
This reverts commit e6c022a61c
2015-01-18 01:31:10 +01:00
Alessandro Ranellucci
e9d08ce51f
Updated MANIFEST
2015-01-18 01:14:14 +01:00
Alessandro Ranellucci
e6c022a61c
Updated Clipper to 6.2.7
2015-01-18 01:07:23 +01:00
Alessandro Ranellucci
357f10732a
Added test case for a Clipper bug
2015-01-18 01:07:23 +01:00
Alessandro Ranellucci
2bbb6c570b
Ported toolpaths rendering to C++
2015-01-18 01:07:22 +01:00
Alessandro Ranellucci
cf4119e169
Populate ExtrusionPath::height correctly in case of bridge
2015-01-18 01:07:22 +01:00
Alessandro Ranellucci
e749f6040f
New +Line::intersection_infinite() method
2015-01-16 16:25:39 +01:00
Alessandro Ranellucci
a616d64971
Bump version number
2015-01-15 22:35:14 +01:00
Alessandro Ranellucci
e0a3d2577c
Initial work for 3D rendering of toolpaths
2015-01-15 20:06:30 +01:00
Alessandro Ranellucci
18e815d032
More efficient 3D preview of slices
2015-01-15 18:49:07 +01:00
Alessandro Ranellucci
bf02062a67
Bugfix: random but frequent crashes after recent perimeter code refactoring
2015-01-14 22:55:11 +01:00
Alessandro Ranellucci
9a7e5327ab
Support --solid-fill-pattern for legacy. #2527
2015-01-13 23:22:27 +01:00
Alessandro Ranellucci
04aa240265
Only apply perimeter/infill overlap to the endpoints of rectilinear infill (and do that in a more proper way)
2015-01-13 20:55:20 +01:00
Alessandro Ranellucci
bb9ceba343
Releasing 1.2.5
2015-01-09 13:44:28 +01:00
Alessandro Ranellucci
02d717b7a3
Don't put any M200 automatically when volumetric mode is selected. Explain how to do it manually in the tooltip. #1746
2015-01-09 12:02:04 +01:00
Alessandro Ranellucci
64c9e3af4b
Bugfix: objects were floating in STL export after rotation and flip. #2512
2015-01-09 00:47:40 +01:00
Alessandro Ranellucci
9ec7b43ca1
Merge branch 'master' into sender
...
Conflicts:
lib/Slic3r/GUI/Tab.pm
2015-01-08 22:47:43 +01:00
Alessandro Ranellucci
79cb350f2d
Fixed segfault in new MotionPlanner code when environments were empty (small islands). #2511
2015-01-08 21:24:51 +01:00
Alessandro Ranellucci
fc47892474
Bump version number
2015-01-08 15:31:59 +01:00
Alessandro Ranellucci
406d045ced
The inwards move after an external loop was still randomly generated outwards in some cases. Perimeters are now generated with a distinct iterator for each slice. Nested islands are also correctly supported too. Various regression tests included. #2253
2015-01-08 15:22:13 +01:00
Alessandro Ranellucci
af92e3d49e
Bugfix: validation for sequential printing was not entirely correct. #2480
2015-01-07 21:57:22 +01:00
Alessandro Ranellucci
1b766f12ca
Minor fix after recent changes in MotionPlanner
2015-01-06 23:30:28 +01:00
Alessandro Ranellucci
21a660c56c
Fix compilation
2015-01-06 21:29:32 +01:00
Alessandro Ranellucci
d4ae734659
Minor improvement to IntersectionLine (now subclasses Line)
2015-01-06 20:58:07 +01:00
Alessandro Ranellucci
8f4cbefd0d
Lots of improvements to MotionPlanner/avoid_crossing_perimeters. Smoother paths and several edge cases now handled better
2015-01-06 20:52:36 +01:00
Alessandro Ranellucci
5e100abe25
Added several drawing methods to Slic3r::SVG
2015-01-06 20:51:48 +01:00
Alessandro Ranellucci
713fcb5e8e
New methods in Slic3r::SVG C++ class
2015-01-06 16:26:15 +01:00
Alessandro Ranellucci
2562070232
Refactored the travel/retract/avoid_crossing_perimeters logic. Several edge cases are now handled correctly. #2498
2015-01-06 14:52:03 +01:00
Alessandro Ranellucci
7e82159620
Fixed one more case where only_retract_when_crossing_perimeters didn't apply. #2498
2015-01-06 11:29:34 +01:00
Alessandro Ranellucci
9fd0637990
Bugfix: artifacts were introduced when perimeters were recalculated through incremental slicing. #2494
2015-01-05 21:00:50 +01:00
Alessandro Ranellucci
47e4e8bb66
Option to use volumetric E values. #1746
2015-01-05 19:39:10 +01:00
Alessandro Ranellucci
6776d6bc00
Bugfix: a bug in Polyline::split_at() caused random loss of perimeter segments. #2495
2015-01-05 15:51:57 +01:00
Alessandro Ranellucci
9af43bee52
Handle log, temperatures. Move controller to main tabpanel. More things
2015-01-04 23:18:23 +01:00
Alessandro Ranellucci
3ab4d4b094
Merge branch 'master' into sender
2015-01-04 19:36:28 +01:00
Alessandro Ranellucci
a6f3e6bfdb
Mark Vibration Limit as deprecated. #2483
2015-01-04 19:32:59 +01:00
Alessandro Ranellucci
92e896c4d1
Prettify infill pattern labels
2015-01-04 19:32:05 +01:00
Alessandro Ranellucci
cbc0e270b7
Nicer configuration fields for USB/Serial connection
2015-01-04 19:14:54 +01:00
Alessandro Ranellucci
16939b80e6
Implemented priority queue
2015-01-04 18:17:15 +01:00
Alessandro Ranellucci
504cbd89db
Fix bug in admesh code that causes random binary STL files not to be read correctly on Windows. #2461
2015-01-04 11:46:58 +01:00
Alessandro Ranellucci
2c0d216c1a
More work on print controller
2015-01-03 23:25:55 +01:00
Alessandro Ranellucci
d8be67c28b
Bugfix: Douglas-Peucker used perpendicular distance instead of shortest distance, thus clipping more than it should. #2474
2015-01-03 15:03:53 +01:00
Alessandro Ranellucci
c06ce3b58c
Initial work for a controller GUI
2014-12-31 19:10:46 +01:00
Alessandro Ranellucci
29d64107de
Merge branch 'master' into sender
2014-12-31 16:25:26 +01:00
Alessandro Ranellucci
fffdbe0abb
Releasing 1.2.4
2014-12-30 14:51:59 +01:00
Alessandro Ranellucci
c4832c5342
Bugfix: early object destruction caused a segfault when splitting. Also fixed a memory leak and restore background processing when split only detected one part. #2466 #2398
2014-12-30 13:16:28 +01:00
Alessandro Ranellucci
494efe65b2
Bugfix: auto-center didn't update the PrintObject copies properly, causing misalignment. #2464
2014-12-29 22:29:24 +01:00
Alessandro Ranellucci
200130bc10
Bump version number
2014-12-29 12:49:49 +01:00
Alessandro Ranellucci
6896e53078
Octoprint -> OctoPrint
2014-12-29 12:49:32 +01:00
Alessandro Ranellucci
13b4237fec
Releasing 1.2.3
2014-12-29 11:45:41 +01:00
Alessandro Ranellucci
fbb3462f5b
Bump version number
2014-12-28 14:58:58 +01:00
Alessandro Ranellucci
efe7d5f857
Integration with Octoprint. #1826
2014-12-28 01:30:05 +01:00
Alessandro Ranellucci
b126f92f41
Finished GCodeSender
2014-12-27 22:58:01 +01:00
Alessandro Ranellucci
8b438dc0de
Merge branch 'master' into sender
2014-12-27 18:10:03 +01:00
Alessandro Ranellucci
9803e2fabf
Releasing 1.2.2
2014-12-27 14:38:55 +01:00
Alessandro Ranellucci
005f138ce7
Merge branch 'master' into sender
2014-12-26 01:30:48 +01:00
Alessandro Ranellucci
70601eeb51
Tell what options were changed when prompting user for saving a modified preset. Also, check whether the preset was actually modified by performing a proper idempotent diff. #2165
2014-12-25 17:35:31 +01:00
Alessandro Ranellucci
5a0f4eac8d
One more retraction optimization
2014-12-25 11:37:54 +01:00
Alessandro Ranellucci
5639132dae
Bugfix: the region_volumes vector was not always extended after creating new regions, causing bad memory access in apply_config(). #2446
2014-12-24 18:35:59 +01:00
Alessandro Ranellucci
4848cb7606
Ported PrintObject::bridge_over_infill() to XS
2014-12-24 10:20:55 +01:00
Alessandro Ranellucci
5d3cd792eb
Make infill_only_where_needed idempotent. #2198
2014-12-24 01:29:36 +01:00
Alessandro Ranellucci
91bc4d8157
Bugfix: a typo caused wrong loop splitting, thus wrong ordering of perimeters having bridging parts. Includes regression test. #2258
2014-12-24 00:11:29 +01:00
Alessandro Ranellucci
25bc8e6f29
Smarter automatic disabling of GUI fields + reordering of Print Settings pages + minor adjustments to tooltips
2014-12-23 20:47:11 +01:00
Alessandro Ranellucci
64061267c8
Align infill across layers regardless of first-layer-specific extrusion width. Includes a good internal API refactoring and a fix to 3D honeycomb flow
2014-12-22 16:47:35 +01:00
Alessandro Ranellucci
93507bfd49
Bugfix: only_retract_when_crossing_perimeters was not correctly applied on bottom layer when no bottom solid layers were printed
2014-12-22 11:46:16 +01:00
Alessandro Ranellucci
1b582ea66a
Remove the "(slow)" mark on infill patterns that used to be slow in the past
2014-12-22 10:48:05 +01:00
Alessandro Ranellucci
4fc955a0fd
Fixed concave_points() and convex_points() after recent change of ccw_angle()
2014-12-21 23:10:38 +01:00
Alessandro Ranellucci
7253dc699a
Some more work on wireframe
2014-12-21 22:52:18 +01:00
Alessandro Ranellucci
a0dda36df0
Minor fix to BridgeDetector
2014-12-17 01:21:12 +01:00
Alessandro Ranellucci
21ea100d0e
Fixed tests
2014-12-17 01:15:47 +01:00
Alessandro Ranellucci
9264db7ecd
Removed useless thing added in e79aa2e81c
2014-12-17 00:52:01 +01:00
Alessandro Ranellucci
c00061678b
Use perimeter extruder for brim. #618
2014-12-17 00:45:05 +01:00
Alessandro Ranellucci
e79aa2e81c
New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618
2014-12-17 00:34:00 +01:00
Alessandro Ranellucci
fcfb3b98bc
3D object positioning
2014-12-16 01:12:56 +01:00
Alessandro Ranellucci
a82f95e903
Some initial work for 3D slice rendering
2014-12-15 15:19:42 +01:00
Alessandro Ranellucci
9cd0a63331
Refactoring of PreviewCanvas
2014-12-15 01:28:11 +01:00
Alessandro Ranellucci
2f2ae75529
Some incomplete work for moving objects in 3D plater
2014-12-13 22:18:43 +01:00
Alessandro Ranellucci
d1f58cbed5
Objects can be selected in 3D preview now. Double click and right click work as well
2014-12-13 20:41:03 +01:00
Alessandro Ranellucci
ac495e974a
Update test
2014-12-12 23:02:28 +01:00
Alessandro Ranellucci
133466a6b5
Minor improvements to the Skirt Loops tooltip
2014-12-12 22:50:43 +01:00
