3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
15,064 Commits 1 Branch 1 Tag 249 MiB
73c9f939e0
Commit Graph

15064 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Vojtech Bubnik
500c667d7a Extended miniz with https://github.com/richgel999/miniz/pull/147 
to support writing a file from a callback without knowing the file
size up front. See comments in src/miniz/README-Prusa.txt for potential
pitfalls.
 2021-01-26 09:29:34 +01:00
Vojtech Bubnik
4620402ab4 WIP: Initial Fuzzy Skin implementaiton #2010 
Based on pull request Experimental fuzzy skin mode #4611 by @etet100
and on CuraEngine implementation of perimeter fuzzyfication
void FffPolygonGenerator::processFuzzyWalls(SliceMeshStorage& mesh)
 2021-01-26 09:29:34 +01:00
Pascal de Bruijn
93da13b0a3 creality.ini: set slowabl to 120C to match fastabl 2021-01-25 21:06:50 +01:00
Pascal de Bruijn
c27ab57c18 creality.ini: use 120C nozzle temp for bed leveling for CR-6 SE 
it seems the CR-6 SE uses 120C for it's strain gauge based bed leveling,
so we'll make this our general default, so we can limit the number of
start_gcode variants we'll need to maintain.

this also introduces a 10 second dwell before any homing happens, to
allow the nozzle to warm up, so that any filament stuck on the nozzle
becomes somewhat pliable.
 2021-01-25 20:32:22 +01:00
Pascal de Bruijn
5f9cf7cfae creality.ini: Move print head further up for low prints 
With low prints, moving the print head up 70mm can still be too low
to be able to remove a print conveniently, so make sure the print head
is at least 60% up at the end of a print.
 2021-01-25 17:22:13 +01:00
YuSanka
d9448c9f2a Follow-up to ab3468a420 : Added missed icon for the DarkMode 2021-01-24 14:54:44 +01:00
Pascal de Bruijn
78354ee991 creality.ini: reduce prime line in start_gcode 
reduce the prime line sufficiently so the Ender-2 no longer requires
a seperate start_gcode

the extrusion pressure is scaled proportionately, and reduced slightly,
as previously some nozzle ooze could happen between the prime line and
the skirt loops due to excessive pressure buildup
 2021-01-24 13:09:22 +01:00
Pascal de Bruijn
6bcdf0999c creality.ini: universal end_gcode improvement 
Replace hardcoded print presentation coordinate with print_bed_max[1],
where we move the print bed ~3/4 of the bed size across the y axis
at the end of the print.
 2021-01-24 12:40:52 +01:00
Pascal de Bruijn
4ede5c3959 creality.ini: Ender3 V2 naming consistency 2021-01-23 19:31:23 +01:00
Pascal de Bruijn
6955e8ec08 creality.ini: raise Das Filament PLA bed temp 
At 50C prints with sharper corners can be prone te warping if the
first layer height isn't quite optimal, and given that most Creality
printers don't have ABL, it often isn't.

So to optimize chances of getting good non-warped prints, we keep
all PLA bed temps at 60C for Creality printers.
 2021-01-23 19:12:01 +01:00
Pascal de Bruijn
231cd758c1 creality.ini: improve nonabl start_gcode 2021-01-23 19:09:29 +01:00
YuSanka
ab3468a420 Added missed icons for the DarkMode 2021-01-22 21:48:10 +01:00
YuSanka
79b7ccbb79 OSX specific, related to the wxWidgets 3.1.4: Fixed wrong UI-scaling 
(wxWidgets 3.1.4 can binding of wxEVT_DPI_CHANGED now, so it was called msw_rescale() for most of the controls redundantly)

+ Fixed update of the DoubleSlider after changing of the system color
 2021-01-22 21:44:15 +01:00
Vojtech Bubnik
eef800b5c4 FIXME on ExPolygon::overlaps(), which should be commutative. 2021-01-22 15:32:45 +01:00
enricoturri1966
30f43974fb ENABLE_GCODE_VIEWER_STATISTICS - GCodeViewer statistic dialog modified to not require extra frames render 2021-01-22 12:32:40 +01:00
enricoturri1966
97c31b2a34 ENABLE_SPLITTED_VERTEX_BUFFER - Re-enable tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING after fixing it 2021-01-21 16:33:35 +01:00
enricoturri1966
0f8e7f3e8b Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer 2021-01-21 09:44:27 +01:00
enricoturri1966
56b378d766 Fixed visualization of point toolpaths, broken with daa0bbdb0c 2021-01-21 09:44:02 +01:00
YuSanka
59017a7dae wxBitmapComboBox under OSX and wxComboBox under other platforms is used on Manipulation panel for coordinate space choice now. 
+ Fix of warning on wxBitmap.SetWidth(): deleted meaningless from wxWidgets 3.0 code
 2021-01-20 17:34:54 +01:00
enricoturri1966
5161643fc6 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer 2021-01-20 13:48:09 +01:00
enricoturri1966
ee40ab421a ENABLE_SPLITTED_VERTEX_BUFFER - Use unsigned short indices buffers to render toolpaths and temporary disable tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING which is causing artifacts 2021-01-20 13:47:48 +01:00
Vojtech Bubnik
6d7d482ca1 Fix of Extrusion Width Percentge #4631 
Fixed extrusion width validation logic in case the extrusion width
was specified wrt. layer height.
 2021-01-20 11:03:52 +01:00
Vojtech Bubnik
979dfe50b8 OSX specific, needed after update of Xcode to 12.2 with OSX SDK 11.1, 
where we have issues with false positives of address sanitizer
https://github.com/google/sanitizers/wiki/AddressSanitizerContainerOverflow#false-positives
Setting ASAN_OPTIONS=detect_container_overflow=0 inside Info.plist
 2021-01-20 09:21:16 +01:00
Vojtech Bubnik
c506c15ed4 Manual merge of 4e586b8edabde1146c4013ca2437469a448315e2 from upsteam Slic3r, 
fixing "percent first layer speed was not applied over autospeed." GH upstream Slic3r #2945
our GH issue First Layer Speed Percentage not applying (#5829)
 2021-01-19 16:50:24 +01:00
Vojtech Bubnik
b7c8d6db9f Bumped up minimum required OSX version from 10.9 to 10.10 due to 
an update of wxWidgets, which do not compile cleanly on 10.9 without
further patching.
 2021-01-19 15:59:29 +01:00
Vojtech Bubnik
6d49bc1978 Follow-up to 2bc6679a62 
Set the printer_technology field.
 2021-01-19 15:35:27 +01:00
Vojtech Bubnik
2bc6679a62 Partial revert of 1bffc2b99b 
(deriving the printer technology from the merged configs).
 2021-01-19 15:18:03 +01:00
tamasmeszaros
7cd218a4ee Merge branch 'tm_ui_job_rethrow' 2021-01-19 15:01:36 +01:00
tamasmeszaros
56e7d83513 Implement exception rethrow for ui jobs 2021-01-19 15:01:20 +01:00
Vojtech Bubnik
264ce71e94 Bumped up wxWidgets version on OSX for X86. 2021-01-19 14:26:37 +01:00
Lukas Matena
a5dc3c4b66 Bugfix: CLI slicer should slice in FDM mode when no printer_technology is provided. 
This was broken between 2.2.0 and 2.3.0 (1bffc2b) and changed the CLI behaviour.
Also related to 5029.
 2021-01-19 10:29:35 +01:00
Vojtech Bubnik
5294a48ee8 Fix of prusa 2.3.0 crash with 0.25 nozzle #5825 
Importing a config bundle as a config file was broken for
multi material FDM printers, where a different filament was active
for each extruder.
 2021-01-19 09:58:14 +01:00
YuSanka
1efa129b67 Fix of #5619 - Copying Item with Printable Property 2021-01-18 15:19:02 +01:00
enricoturri1966
56d26ad491 ENABLE_SPLITTED_VERTEX_BUFFER - slightly faster indices buffers generation in GCodeViewer::load_toolpaths() 2021-01-18 13:55:45 +01:00
enricoturri1966
3a0aabb924 ENABLE_SPLITTED_VERTEX_BUFFER - small refactoring in GCodeViewer::load_toolpaths() 2021-01-18 11:37:23 +01:00
enricoturri1966
59cabc9712 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer 2021-01-18 09:59:26 +01:00
enricoturri1966
8f1bc02287 ENABLE_SPLITTED_VERTEX_BUFFER - fixed cracks in toolpaths when splitting vertex and index buffers 2021-01-18 09:59:05 +01:00
Vojtech Bubnik
9a2310ae98 Fix of [prusa3d/PrusaSlicer] Remove unnecessary null pointer checks (#5813) 
Don't use
if (ptr)
	delete ptr;
call
delete ptr;
directly, it contains the test for null ptr.
 2021-01-18 09:33:19 +01:00
Vojtech Bubnik
d06aa60691 Fixing Perl bindings after update of Boost. 2021-01-15 19:47:51 +01:00
Vojtech Bubnik
d28d8dda75 Updated boost requies date_time library to be compiled. 2021-01-15 18:07:14 +01:00
Vojtech Bubnik
dd9269a9d1 Bumped up boost version from 1.70.0 to 1.75.0 mainly due to an issue 
with an updated Xcode / clang incorrectly reporting that it supports
__cpp_lib_uncaught_exceptions while it does not if targeting older
platforms. This issue has been fixed in boost 1.74.0 and 1.75.0
 2021-01-15 13:46:33 +01:00
Lukas Matena
aa19870c54 Updated doc/Localization_guide.md 2021-01-15 11:53:42 +01:00
Vojtech Bubnik
d63e681bf3 Further improvement of how to build on windows guide 2021-01-15 09:40:13 +01:00
Vojtech Bubnik
59911e7c35 Slight improvement in Hilbert infill by using constexpr 2021-01-15 09:34:50 +01:00
Vojtech Bubnik
21d01291fb Updated windows building guide to build dependencies out of the PrusaSlicer 
source tree.
 2021-01-15 09:34:03 +01:00
Vojtěch Bubník
5d16bf6e56
Merge pull request #5069 from rackley096794/patch-1 
Update How to build - Windows.md
 2021-01-15 09:25:37 +01:00
Ray Ackley
821560ee2b
Merge branch 'master' into patch-1 2021-01-14 08:44:23 -05:00
Vojtech Bubnik
63e666b8d6 Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer 2021-01-14 12:51:38 +01:00
Vojtech Bubnik
48877614e2 Fix of --scale-to-fit not accepting any input as valid (#5772) 
Fixed parsing of Point3, fortunately Point3 was used at just a single
command line parameter, thus this was not a big deal.
 2021-01-14 12:51:28 +01:00
enricoturri1966
f27032f603 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer 2021-01-14 11:38:22 +01:00