David Kocik
5946989c21
Stop giving notifications focus on hover.
2021-10-18 15:02:13 +02:00
Vojtech Bubnik
32ebfa66e9
Fix of M106 on every new layer #7094
...
after parallelization of CoolingBuffer:
Remember the last fan speed emitted at the previous layer.
2021-10-18 14:56:02 +02:00
Vojtech Bubnik
556e0c53c7
Some more refactoring of ClipperLib / closing() / opening()
2021-10-18 14:51:30 +02:00
tamasmeszaros
f494ad565b
Fix some builds that fail with cgal 5.2.3
2021-10-18 14:38:55 +02:00
Lukáš Hejl
25a3ab255b
Merge branch 'lh_avoid_crossing_perimeters_offset'
2021-10-18 12:55:06 +02:00
Lukáš Hejl
4d47e9a184
Allow travels processed by the avoid crossing perimeters move further away from the outer perimeter.
2021-10-18 12:51:20 +02:00
Lukáš Hejl
c660091bfa
Merge branch 'lh_fdm_supports_smart_fill'
2021-10-18 11:35:39 +02:00
Lukáš Hejl
0c2d9f01a6
Fixed z-fighting between contour around the area selected by smart fill and painted triangles inside the FDM support painting gizmo.
2021-10-18 11:35:13 +02:00
Lukáš Hejl
b45675b4e1
Follow-up of 6194e67e68 - Separated the part that computed triangles normals and lighting inside the fragment shader into a separate shader mm_gouraud, which is only used for the multi-material painting gizmo.
2021-10-18 11:35:13 +02:00
Lukáš Hejl
912f73d79c
Fixed the positioning of the supports painting gizmo.
2021-10-18 11:33:47 +02:00
Lukáš Hejl
552c42d466
Merge branch 'lh_fdm_supports_gizmo'
2021-10-18 11:10:54 +02:00
Lukáš Hejl
6f3baf9262
Added tooltips to the support painting gizmo. Used multi-line text for the label "Highlight overhang by angle".
2021-10-18 10:57:57 +02:00
Lukáš Hejl
b2fc50c9d9
Small refactoring of showing tooltips in gizmos.
2021-10-18 10:56:50 +02:00
Lukáš Hejl
6f6f6de506
Added an option to limit painting to triangles only highlighted by "Highlight by angle" in the support painting gizmo.
2021-10-18 10:54:31 +02:00
Vojtech Bubnik
bec140b4bc
"only_retract_when_crossing_perimeters" disabled by default
...
to reduce stringing for "custom" printers based on "defaults".
2021-10-15 16:35:16 +02:00
tamasmeszaros
5e3da340ae
Fix crash with some models after hole drilling
2021-10-15 15:32:14 +02:00
David Kocik
29544c0d3d
Merge branch 'dk_notifications'
2021-10-15 15:05:08 +02:00
David Kocik
81cb190e2f
Export ongoing notification with delay 1000ms to prevent quick opening and closing on fast systems
2021-10-15 15:04:44 +02:00
Vojtech Bubnik
1ca24f0bd0
Fixed visualization of G-code in G-code viewer after 07e7e11590
...
Fix of prusa-gcodeviewer changes modification time of the viewed gcode file #7005
2021-10-15 14:31:57 +02:00
kocikdav
df30dfc2bc
Merge pull request #7117 from jurriaan/patch-1
...
Fix missing `wx/timer.h` header compile issue
2021-10-15 11:37:51 +02:00
Jurriaan Pruis
43d952779a
Fix missing wx/timer.h header compile issue
...
Tried to compile the latest git version on my system and got an error that wxTimer could not be found. Fixed it by adding in the header.
cc @kocikdav
2021-10-15 10:44:19 +02:00
Vojtech Bubnik
a6f4b9b71f
Snug supports: Extrude interface layers 45 degrees from the base layer,
...
flip direction of the infill layer with each interface layer.
Unfortunately the flipping of support interface directions may not work
reliably due to base support layer heights growing at different rate
from the interface layers.
2021-10-14 13:56:04 +02:00
David Kocik
c838aabf1d
Merge branch 'dk_tips'
2021-10-14 14:30:29 +02:00
David Kocik
ffc29a2536
Preferences Highlighter
2021-10-14 14:29:53 +02:00
YuSanka
aecd7e2b93
GalleryDialog: Added context menu for custom shapes
...
+ Added possibility to delete custom shaped by "DELETE" key
2021-10-14 12:16:14 +02:00
enricoturri1966
7be17d89e6
Fixed conflicts after merge with master
2021-10-14 10:48:46 +02:00
Lukáš Hejl
2f9ce6bedb
Fixed incorrect color assignment in multi-material segmentation caused by intersecting edges due to post-processing of Voronoi diagram.
...
This issue was occurring mainly on the cylinder objects.
2021-10-14 09:39:23 +02:00
Vojtech Bubnik
64a3866ad5
Making GCC happy.
2021-10-14 09:33:39 +02:00
Vojtech Bubnik
0222533273
Fixed compilation on non MS systems
2021-10-14 09:31:53 +02:00
Vojtech Bubnik
7ff76d0768
New ClipperUtils functions: opening(), closing() as an alternative
...
for offset2() with clear meaning.
New ClipperUtils functions: expand(), shrink() as an alternative
for offset() with clear meaning.
All offset values for the new functions are positive.
Various offsetting ClipperUtils (offset, offset2, offset2_ex) working
over Polygons were marked as unsafe, sometimes producing invalid output
if called for more than one polygon. These functions were reworked
to offset polygons one by one. The new functions working over Polygons
shall work the same way as the old safe ones working over ExPolygons,
but working with Polygons shall be computationally more efficient.
Improvements in FDM support generator:
1) For both grid and snug supports: Don't filter out supports for which
the contacts are completely reduced by support / object XY separation.
2) Rounding / merging of supports using the closing radius parameter is
now smoother, it does not produce sharp corners.
3) Snug supports: When calculating support interfaces, expand the projected
support contact areas to produce wider, printable and more stable interfaces.
4) Don't reduce support interfaces for snug supports for steep overhangs,
that would normally not need them. Snug supports often produce very
narrow support interface regions and turning them off makes the support
interfaces disappear.
2021-10-14 09:11:31 +02:00
David Kocik
0d86153704
Merge branch 'dk_notifications'
2021-10-13 17:05:08 +02:00
David Kocik
1308b255fe
missing include and template type
2021-10-13 17:04:40 +02:00
David Kocik
15ba458f2c
Merge branch 'dk_notifications'
2021-10-13 15:39:31 +02:00
David Kocik
ac6259e387
Preferences: notify_relese option with Choice type Field.
...
OptionsGroup:: Added possibility of the right alignment of the controls
+ Added separator line to Preferences
2021-10-13 15:39:06 +02:00
enricoturri1966
405a7e84d6
Fix in seams detection (restore detection after wiping)
2021-10-13 11:13:31 +02:00
YuSanka
a4ad4ff4a9
Auto color change: check overhangs lust from Preview when detecting auto color changes
...
+ fixed typo in equivalent_areas()
+ Added missed include
2021-10-12 15:23:50 +02:00
YuSanka
5990f05418
Follow-up cedfc5e3fb - Next code refactoring to avoid inconsistency between AutoColorChangeDetection in Preview and DoubleSlider
2021-10-12 14:18:39 +02:00
enricoturri1966
8befc43739
Seams detection now takes in account for overhang perimeters
2021-10-12 12:03:34 +02:00
enricoturri1966
19572068a5
Revert of e28ebf9386
2021-10-12 11:49:51 +02:00
tamasmeszaros
ac414e226f
Minor beautification
2021-10-12 10:55:23 +02:00
YuSanka
cedfc5e3fb
DoubleSlider: Code refactoring for auto color change
2021-10-12 10:47:21 +02:00
tamasmeszaros
94843bb6bf
Removing search for upstream miniz as its no longer compatible.
...
Due to 729298c408fixes #7080
2021-10-12 09:59:59 +02:00
enricoturri1966
e28ebf9386
Removed threshold to detect seams to be shown in preview
2021-10-12 09:53:23 +02:00
YuSanka
b39eb7f222
Gallery: Fixed a naming of the added item with already existing name.
...
+ Fixed layout after add/delete item to/from Gallery
2021-10-11 11:21:27 +02:00
David Kocik
c1729594eb
Merge branch 'dk_notifications'
2021-10-11 10:02:10 +02:00
David Kocik
c4f78fcdc9
Check version string for alpha and beta release versions.
...
Preferences setting to show / not show alpha beta releases.
2021-10-11 10:01:48 +02:00
YuSanka
e1104d5f7d
Win11 specific: Added workaround for implicit set of the dark mode
2021-10-11 09:54:38 +02:00
YuSanka
c921d6f936
ObjectList: Fixed positioning of the object's part/modifiers when it's added
...
Use load_modifier() for everything without a respect to the type
2021-10-08 12:14:49 +02:00
enricoturri1966
b9ac80ccd4
#7076 - Modifiers and similar objects always rendered as transparent
2021-10-08 10:48:46 +02:00
YuSanka
ce397a0c5c
ShapeGallery: Added more system shapes
2021-10-08 09:05:03 +02:00
