14339 Commits

Author	SHA1	Message	Date
daid303	ae1bc83350	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	2012-12-13 13:25:22 +01:00
daid303	596a7e1904	Fix compiling for Arduin < 1.0.0	2012-12-13 13:24:55 +01:00
Daid	b264317fa0	Reverted the patch by KevinOConnor, as it crashes some versions of avr-gcc and caused linking issues.	2012-12-13 12:19:12 +01:00
Daid	673577a31b	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	2012-12-13 11:41:34 +01:00
Daid	23022f1a82	Updates to Makefile to compile for Teensy.	2012-12-13 11:41:27 +01:00
daid	96e9db8919	Merge pull request #339 from KevinOConnor/CompilerFlags ... Add additional optimization flags to Makefile	2012-12-13 01:30:17 -08:00
daid303	08356361ac	Fixing a problem with heated beds not working without PID and BED_LIMIT_SWITCHING	2012-12-13 10:25:29 +01:00
daid303	047d037f8c	#ifdef fix for #326	2012-12-13 09:04:41 +01:00
Kevin O'Connor	0908458381	Use gcc "-fwhole-program" optimization. ... Use "whole program" and "link time optimization" features of gcc. The whole-program optimization enables the compiler to evaluate the entire firmware for optimization instead of just one code file at a time. This leads to better overall optimizations.	2012-12-12 23:22:35 -05:00
Kevin O'Connor	16fbb455ef	Use linker "--relax" option. ... The "relax" option enables the linker to convert certain "call" instructions to the smaller "rcall" instruction. This reduces the size of the resulting binary.	2012-12-12 23:22:31 -05:00
daid303	f30b46b2a8	One more fix for #338, I really should get a heated bed to test with.	2012-12-12 23:06:17 +01:00
daid303	65c3f1ffcd	Most likely fixing #338	2012-12-12 21:56:17 +01:00
daid303	7577717b59	Fixed #336	2012-12-12 13:08:26 +01:00
daid303	1a8f54cea1	The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.	2012-12-12 11:47:03 +01:00
daid303	6731c094ee	Fix compiling with just an 16x2 LCD and no buttons.	2012-12-12 11:32:33 +01:00
daid303	b99a928a80	Fix the M117 (display message on LCD) when used over USB with checksums.	2012-12-12 09:35:32 +01:00
daid303	55ba90ac19	Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.	2012-12-12 09:08:37 +01:00
daid303	5ff5cee8ce	Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)	2012-12-11 14:53:53 +01:00
daid303	8b58edc70e	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	2012-12-11 13:38:34 +01:00
daid	d0319d45af	Merge pull request #335 from jcrocholl/Marlin_v1 ... Fix endstop pins for Printrboard	2012-12-11 02:59:58 -08:00
Johann Rocholl	ca409e5531	Fix X/Y/Z_MIN_PIN for Printrboard.	2012-12-11 01:59:48 -08:00
Johann Rocholl	1f45cb0a51	Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.	2012-12-11 01:54:40 -08:00
Johann Rocholl	931a0052ea	Fix typo in MANUAL_HOME_POSITION (plural S missing) and reduce BLOCK_BUFFER_SIZE because 64 wasn't working for some reason.	2012-12-11 01:22:04 -08:00
daid303	46ec4b648c	Added some missing Mxxx comments to M commands. Fixed the unsetting of the timer dividers for the fast PWM fan.	2012-12-11 10:21:44 +01:00
Daid	724f5aa36b	Update on makefile for moved Arduino addons.	2012-12-10 12:06:30 +01:00
daid303	6d9dfa96c3	Move the Arduino related stuff out of the Marlin tree, as they are not directly related to Marlin functionality but addons for the Arduino IDE. Also split up the addons for pre 1.0.0 Arduino and post 1.0.0 Arduino.	2012-12-10 12:02:29 +01:00
daid303	3fb07d9b8d	Add MINTEMP/MAXTEMP error to LCD, and fix temperature bug with more then 1 extruder.	2012-12-10 10:48:46 +01:00
Johann Rocholl	8e2519e88b	Add realtime delta geometry in Marlin_main.cpp.	2012-12-10 01:04:12 -08:00
Johann Rocholl	cec7283b21	Enable QUICK_HOME for deltabot.	2012-12-10 00:43:47 -08:00
Johann Rocholl	2292441f0c	Use X/Y/Z_MAX_PIN instead of X/Y/Z_MIN_PIN for top endstops on deltabot.	2012-12-10 00:43:14 -08:00
Johann Rocholl	c430906d3b	Deltabot settings and configuration adjustments.	2012-12-10 00:10:56 -08:00
daid303	82c8724b33	Fix compile with PID_DEBUG	2012-12-09 23:50:12 +01:00
daid303	9b160972a1	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	2012-12-09 23:46:42 +01:00
daid303	e036750bdf	Use the disable macros on initialization. Which fixes a bug when there is no pin defined for stepper enabled (motherboard 4)	2012-12-09 23:46:25 +01:00
Daid	fcd9de72ef	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	2012-12-09 23:31:07 +01:00
Daid	32d4373e0f	Add printrboard and brainwave to Makefile.	2012-12-09 23:30:55 +01:00
daid	b3ddbcee2a	Merge pull request #329 from jcrocholl/Marlin_v1 ... Add Printrboard and Brainwave to pins.h and fastio.h	2012-12-09 14:29:26 -08:00
Daid	29435dfb4b	Proper avr for Sanguino in Makefile.	2012-12-09 23:02:03 +01:00
daid303	52158dffcc	Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.	2012-12-09 23:00:06 +01:00
Daid	ca7acbe6d9	Allow specification of which arduino hardware subvariant in Makefile.	2012-12-09 19:19:57 +01:00
Johann Rocholl	33247733e0	Teensylu and Printrboard use different analog pins for thermistors.	2012-12-09 02:19:13 -08:00
Johann Rocholl	621c24a10f	AT90USB is only defined after pins.h is included.	2012-12-09 01:40:33 -08:00
Johann Rocholl	6cba11f087	Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.	2012-12-09 01:32:09 -08:00
Johann Rocholl	4d351b4846	Improved formatting and comments for consistency.	2012-12-08 20:15:53 -08:00
Johann Rocholl	a30007caa4	If fastio.h is not messed up then Teensylu and Printrboard are actually using the same pins.	2012-12-08 19:46:42 -08:00
Johann Rocholl	6aa87a7b67	Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.	2012-12-08 15:16:38 -08:00
Johann Rocholl	b1c38d4c82	Avoid compiler warnings (redefined MOTHERBOARD) in Arduino 1.0 and greater.	2012-12-08 11:34:18 -08:00
Johann Rocholl	42e21bb06e	Add support for Printrboard (from https://github.com/lincomatic/Marlin) and Brainwave (from https://github.com/metrix/Sprinter).	2012-12-08 10:49:01 -08:00
Johann Rocholl	ce4b5bbeaa	Add AT90USB646 support from Sprinter to fastio.h.	2012-12-08 10:45:58 -08:00
Daid	f413aa33b3	Small makefile change, posibility to add defines on the commandline, and fix compiling with watchdog enabled when using the Makefile.	2012-12-08 11:49:53 +01:00
daid303	587154c01b	Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.	2012-12-06 10:36:07 +01:00
daid303	1f27870d41	Fix compiling the watchdog error message when the manual reset watchdog is used.	2012-12-06 10:27:50 +01:00
daid303	c5d4225804	Mistake there, not sure why I did that. My bad.	2012-12-05 20:23:13 +01:00
daid303	529748894c	Minor changes in the temperature code for some cleanup.	2012-12-05 19:54:01 +01:00
daid303	4e26ecc940	The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.	2012-12-05 19:32:26 +01:00
daid303	c421774422	The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.	2012-12-05 19:32:02 +01:00
daid303	16078e47d4	Fixed #325	2012-12-04 16:27:21 +01:00
daid303	6a9bee27cc	Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.	2012-12-03 12:52:00 +01:00
daid303	94ea26ff46	Some minor changes on code style. And a bugfix where the counters for positioning in the stepper where wrong depending on compiler settings. (Caused strange values to reported back with M114 and endstop triggers). Also fixed compiling with FWRETRACT enabled.	2012-12-03 12:13:20 +01:00
daid303	6c51fe5039	Fix the bug where the SD percentage calculation is wrong when the file is larger then 42MB	2012-12-03 11:35:36 +01:00
brupje	57429cb9fe	Fix for keypad	2012-11-29 21:42:19 +01:00
daid303	97fa2a9c30	Few simple fixes that save RAM, as static strings are stored in RAM by default.	2012-11-28 10:30:34 +01:00
Daid	c94ca24adc	Fixed #317	2012-11-24 17:32:30 +01:00
Daid	99e9554edd	Some fixes in the Makefile to support Arduino 1.0.0 or higher and added the Rambo. Still needs some more work for the different arduino hardware variants.	2012-11-24 11:46:31 +01:00
Erik vd Zalm	dbbf050005	More rambo fixes	2012-11-21 20:53:56 +01:00
Erik vd Zalm	f934d0ef5b	Merge remote-tracking branch 'tonokip/Marlin_v1' into Marlin_v1 ... Conflicts: Marlin/Configuration.h	2012-11-21 20:36:30 +01:00
Erik vd Zalm	e48dfcc2b3	Tmp copy before merge	2012-11-21 20:29:31 +01:00
Erik vd Zalm	b98fb17fe9	Small FREQUENCY_LIMIT changes	2012-11-21 20:17:44 +01:00
daid	bce67ec2c9	Merge pull request #312 from gege2b/Marlin_v1 ... Added french translation	2012-11-18 13:43:07 -08:00
Gege	9b1d2483a0	I hope last changes to french translation	2012-11-18 22:34:56 +01:00
Gege	b1adc567da	Correction to french translation (non-ASCII chars only)	2012-11-18 20:00:41 +01:00
Gege	0807d82af0	Correction to french translation (plain text only)	2012-11-18 19:39:56 +01:00
Erik vd Zalm	5cd7a90b32	Added new temperature lookup table creation tool. This one uses stein hart-hart equations. ... You need 3 temperature resistance:combinations. This gives a better result then using beta.	2012-11-16 23:51:05 +01:00
gege2b	bb119739b0	Added french translation	2012-11-16 18:38:50 +01:00
daid	df8dd5ac21	Merge pull request #306 from nothinman/Marlin_v1 ... Added automatic build numbering.	2012-11-14 01:59:33 -08:00
MaikStohn	2b7b1e52b1	allow marlin internal 0°C represenation	2012-11-13 14:37:08 +01:00
Martin Lukasik	2f771b3979	Added automatic build numbering.	2012-11-12 21:06:59 +00:00
daid	9bebe9b631	Merge pull request #302 from nothinman/Marlin_v1 ... Added Polish translation. Cosmetic changes to English.	2012-11-12 12:13:30 -08:00
daid303	a2032afa3a	Fixed #303	2012-11-12 21:04:07 +01:00
Martin Lukasik	6a55ca8370	Added Polish translation. Cosmetic changes to English.	2012-11-12 15:54:07 +00:00
daid303	8f20562f49	Fix some of the crowded code style. And fixed the conditional. #300	2012-11-12 15:49:40 +01:00
daid303	43018a48c4	Fix for a few -Wextra warnings.	2012-11-12 15:35:28 +01:00
daid303	72586eb30a	Solved few warnings.	2012-11-12 09:29:12 +01:00
daid303	7a02ba361c	Header multiple include protection should match the filename, not just _ARDUINO_H, which is almost bound to go wrong some day.	2012-11-12 09:24:28 +01:00
daid303	f4a89ec776	SDCARDINSERTED is always defined, and thus we do not need the #ifdefs.	2012-11-12 09:16:27 +01:00
daid303	57834776ad	Made the 2nd speed lookup table condition more explicit.	2012-11-11 12:02:48 +01:00
Daid	caa2b25b40	Fix Gen7 compile if you have avr-libc version 1.7.1 or higher. See http://code.google.com/p/arduino/issues/detail?id=604	2012-11-11 11:17:54 +01:00
daid303	a27fef8750	Store the pre-heat constants outside of the ULTIPANEL define, so we can use them when storing EEPROM in a build without the ULTIPANEL.	2012-11-11 11:06:58 +01:00
daid303	789be03b4f	Update on makefile, should make it easier to compile for different boards without changing the makefile. (Still missing Arduino 1.x.x support).	2012-11-11 11:05:52 +01:00
daid303	40ce057a3e	Fixing issue #297	2012-11-10 14:37:01 +01:00
daid303	625ac81acc	Yes, makes sense, lets NOT use the value directly from the configuration define but modify it before setting it. This will not confuse people (including me) at all!	2012-11-09 22:36:31 +01:00
daid303	ffc69537aa	Update on some comments, make the MOTHERBOARD list complete again.	2012-11-09 09:10:51 +01:00
daid303	71efcfc648	Most likely fixing issue #295.	2012-11-08 21:08:05 +01:00
daid303	04be9d6001	God damn. Sorry, my mistake, forgot to add this file.	2012-11-07 23:16:43 +01:00
daid303	c17da4b707	Add ConfigurationStore to the Makefile.	2012-11-07 22:43:01 +01:00
daid	ccd9fd0dc3	Merge pull request #292 from jothan/lcdfix ... Lcd fixes	2012-11-07 13:10:59 -08:00
Jonathan Bastien-Filiatrault	46b9988e26	Search and replace failure.	2012-11-07 16:09:30 -05:00
Jonathan Bastien-Filiatrault	0f73afb0b0	Avoid defining overriding definitions for the RepRapDiscount Smart ... Controller. Remove common definitions. Harmonize declaration order.	2012-11-07 16:04:28 -05:00
Jonathan Bastien-Filiatrault	36b452c7ac	Remove abbrs.	2012-11-07 15:42:18 -05:00
YanFM	332344bd43	Update Marlin/language.h ... Included Portuguese language	2012-11-07 09:43:13 -02:00
daid303	e6c1cadea0	Set the watchdog to a 4 second timeout, as with 1 second it can timeout during SD card init.	2012-11-07 12:32:17 +01:00
daid	faea7d72b8	Merge pull request #290 from buildrob/Marlin_v1 ... Clean up special serial port cases	2012-11-07 02:00:26 -08:00
daid303	12a4d60e18	Fix the EEPROM storage, no longer inline it at multiple locations, and remove the template.	2012-11-07 10:02:45 +01:00
Jonathan Bastien-Filiatrault	9606f4d04f	Include Marlin_main.cpp in source files.	2012-11-06 20:32:48 -05:00
Jonathan Bastien-Filiatrault	3cbaad9288	RepRapDiscount Smart Controller pin definitions.	2012-11-06 20:32:13 -05:00
Robert F-C	99692dc99e	Clean up special serial port cases ... Assume SERIAL_PORT 0 if not defined. Collapse un-numbered register special case. Clarify comments.	2012-11-07 09:00:21 +11:00
daid303	5a998558a9	Update suggested by Robert F-C. #289	2012-11-06 21:04:29 +01:00
daid303	f6ff0ab767	signed/unsigned fixes.	2012-11-06 15:33:49 +01:00
daid303	5d471e0f34	Also reset the PID values to defaults. Fixes #281	2012-11-06 15:21:00 +01:00
daid303	d3ebc34958	Hopefully also support chips with a single UART in MarlinSerial now.	2012-11-06 14:43:36 +01:00
daid303	b6ff45254e	Better explain the watchdog "problem" and rename the config define so it explains that the feature belongs to the watchdog.	2012-11-06 13:33:00 +01:00
daid303	7e348fcb5f	By mistake enabled the watchdog by default. This should be off by default.	2012-11-06 13:20:08 +01:00
daid303	06b58a9c4f	First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.	2012-11-06 12:06:41 +01:00
daid	539f3b3fe4	Merge pull request #284 from brackendawson/Marlin_v1 ... Use the right pins for Gen7 1.4	2012-11-06 01:06:24 -08:00
Robert F-C	65c9a0728f	Set default serial port back to 0.	2012-11-05 22:15:07 +11:00
Robert F-C	ab9d183024	Make serial port configurable. ... This change makes the choice of serial port configurable so that wireless capability can be easily added by connecting Bluetooth modules (such as BlueSmirf or JY-MCU) to the expansion port pins.	2012-11-05 21:34:27 +11:00
Bracken Dawson	f5631a89e8	Add dummy Emergancy Pin to Gen7 1.4 ... Change required after pulling from ErikZalm.	2012-10-26 22:28:37 +01:00
Bracken Dawson	a4f9e1ebf2	Merge git://github.com/ErikZalm/Marlin into Marlin_v1	2012-10-26 22:20:35 +01:00
Bracken Dawson	2873d67b17	Put bogus temp override back in Gen7 up to 1.3 ... Took out the ifdef when I split 1.4 out and forgot to permanently define it for <=1.3.	2012-10-26 22:17:26 +01:00
ErikZalm	a7e40b2903	Merge pull request #276 from setar/Marlin_v1 ... Fix num of digits on LCD for E and Z axis.	2012-10-23 09:48:55 -07:00
MaikStohn	6ed02c86be	Fixed wrong code (will not even compile when EXTRUDERS>2)	2012-10-23 18:08:43 +02:00
Sergey Taranenko	2a67363e27	Fix ‘prog_uchar’ definition in LiquidCrystalRus.cpp	2012-10-22 11:05:17 +04:00
Sergey Taranenko	205304ddee	Merge git://github.com/ErikZalm/Marlin into Marlin_v1	2012-10-22 10:59:27 +04:00
Erik vd Zalm	58bca87c72	fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '	2012-10-21 14:40:06 +02:00
Erik vd Zalm	febeb43197	Revert "fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '" ... This reverts commit cb02c2f9d8.	2012-10-21 14:36:31 +02:00
Sergey Taranenko	8178dec4c3	Fix num of digits on LCD for E and Z axis. ... The number of steps per mm often contains 4 digits before the decimal point and does not require precision greater than 0.1	2012-10-18 17:45:40 +04:00
ErikZalm	70f57a6844	Merge pull request #273 from setar/Marlin_v1 ... fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '	2012-10-17 04:10:18 -07:00
ErikZalm	ff14199e58	Merge pull request #270 from jothan/Marlin_v1 ... Create an explicit rule for building applet/Marlin.cpp.	2012-10-17 04:09:36 -07:00
Daniele Sdei	695938ba3f	Italian language support	2012-10-17 12:48:26 +02:00
Sergey Taranenko	cb02c2f9d8	fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '	2012-10-17 10:49:05 +04:00
Jonathan Bastien-Filiatrault	e4a5e333ef	Generalize.	2012-10-15 21:34:33 -04:00
Jonathan Bastien-Filiatrault	e10d3136c8	Create an explicit rule for building applet/Marlin.cpp. ... It would seem that the pattern matches do not work when the source file is created when make is running. The result of this is that it is necessary to run "make" twice to build the firmware. This adds an explicit rule without a pattern match for building applet/Marlin.cpp it corrects the make behaviour at the cost of adding a little redundancy in the Makefile.	2012-10-15 21:16:25 -04:00
ErikZalm	9f089756b7	Merge pull request #265 from setar/Marlin_v1 ... Added Russian translation	2012-10-14 14:11:58 -07:00
brupje	326423719f	Add support for Megatronics	2012-10-14 14:05:57 +03:00
brupje	d07b6e93d5	Add support for Megatronics	2012-10-14 14:05:12 +03:00
Sergey Taranenko	efcc28d347	Fix check for include LiquidCrystalRus.h	2012-10-13 00:29:34 +04:00
Sergey Taranenko	cfc193cdac	Enables support the Cyrillic alphabet for LCD	2012-10-12 19:06:43 +04:00
Sergey Taranenko	24bcc9647d	Added Russian translation	2012-10-12 18:33:05 +04:00
Mark Finn	bf7e453d02	Unwanted artifacts from unclean merge of bed-pid tree	2012-10-09 14:47:35 -05:00
ErikZalm	36a746d7d5	Merge pull request #244 from markfinn/pidbed ... PID for heated bed	2012-10-08 11:15:16 -07:00
elgambitero	df09e2adce	Spanish updated	2012-09-26 19:14:07 +02:00
elgambitero	ddf6603d81	Spanish language updated. Bug fixes on dialogs.	2012-09-26 19:11:45 +02:00
elgambitero	4bf8b1aeee	fesfas	2012-09-26 19:05:31 +02:00
drakelive	be1e099f1b	Union whit Erick version	2012-09-25 19:17:15 +02:00
elgambitero	7afd202b89	New dialogs translated to spanish. Bug fixes. ... Dialogs from M119 translated, and "Set Preheat" dialogs adapted to the screen size.	2012-09-25 19:16:57 +02:00
elgambitero	ebc4601185	Some new dialogs translated to Spanish	2012-09-25 19:08:44 +02:00
drakelive	c8ea9b0e58	Merge branch 'Marlin_v1' of https://github.com/Drakelive/Marlin	2012-09-25 18:51:20 +02:00
drakelive	ca7ca4572e	primo commit	2012-09-25 18:46:38 +02:00
johnnyr	8016f058bc	fix max endstop pins	2012-09-19 13:15:17 -05:00
Mark Finn	d197f8504b	clean up and changes from testing	2012-09-17 19:18:50 -05:00
Mark Finn	eb06a886c4	missed	2012-09-17 14:23:49 -05:00
Mark Finn	04631d2250	cleanup for pull	2012-09-17 14:17:24 -05:00
Mark Finn	0a5ad3ab85	move comment to correct place	2012-09-17 08:42:35 -05:00
ZetaPhoenix	8ac5b29e02	Changes to M119 response for easier visual comparison ... Changed to report on individual lines with "TRIGGERED" or "open" instead of "H" or "L" on one line as H&L could be confused with logic levels High and Low which may be wrong if using inverted logic. Added strings to language.h. Fixed typo "deu" in English language that was fixed in #134 but got added back in via 9f7f7354f5	2012-09-16 14:51:24 -07:00
ZetaPhoenix	c6caa45ae2	Limit Switch locations based on MIN/MAX limits and homing direction ... fixes #246 Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined. Relocated code based on feedback.	2012-09-15 15:25:49 -07:00
ZetaPhoenix	dc566d654f	fixes #246 ... Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.	2012-09-14 21:48:49 -07:00
ErikZalm	ba898faa7d	Merge pull request #249 from gwelchc/patch-2 ... Slight modification for byte savings	2012-09-14 12:13:36 -07:00
ErikZalm	0152ee71a5	Merge pull request #248 from gwelchc/patch-1 ... Binary representation for characters in ultraldc.pde	2012-09-14 12:10:28 -07:00
G. W. C.	6ccbfeb80c	Update Marlin/Marlin.pde ... Added function 'setTargetedHotend' that turns into a function an operation repeated 3 times through the M-codes processing. This modification saves a few bytes that can be used to add support for new commands.	2012-09-14 16:38:54 +03:00
G. W. C.	c433142abf	Update Marlin/ultralcd.pde ... The joris' char drawins are expressed in binary so to show their content's in a more visual fashion. This is not a code modification as much as a readibility modification.	2012-09-14 16:29:43 +03:00
andrey-vasilyev	1d389ad3a8	Fix M81 not working reliably on Gen7 ... Some discussion of the issue is here http://forums.reprap.org/read.php?181,118329,page=1	2012-09-13 19:23:48 +04:00
Mark Finn	9698f4ea64	bed pid ... Conflicts: Marlin/Configuration.h	2012-09-12 21:18:59 -05:00
drakelive	e5c39b7c2a	commit	2012-09-10 14:25:49 +02:00
ZetaPhoenix	e8c92e0a95	Missing #else in temperature.cpp prevented reading bed temp when TEMP_BED_PIN <7. Thanks to Leland Wallace for helping me track this down via "Sesame Street" coding (what is not like the other)	2012-09-09 16:06:02 -07:00
drake	bf2071871c	Merge branch 'Marlin_v1' of https://github.com/Drakelive/Marlin	2012-09-08 23:08:34 +02:00
drake	fc32e20881	first commit	2012-09-08 22:26:23 +02:00
Erik vd Zalm	abf0693e8e	Added KILL_PIN -1 to gen7 boards	2012-09-04 08:20:27 +02:00
Erik vd Zalm	47319cf64e	Fixed typo in SF arc fix code.	2012-09-03 21:28:31 +02:00
Erik vd Zalm	e358a2d7af	Added fix for SF Arc Point fillet procedure	2012-09-02 01:12:49 +02:00
ErikZalm	044a64a1fb	Merge pull request #225 from Justblair/Marlin_v1 ... Added PDF file containing Menu Tree for documentation purposes.	2012-09-01 04:41:49 -07:00
Drakelive	d728e35658	Update Marlin/pins.h	2012-08-30 23:36:49 +03:00
tonokip	1c1fddc7ac	Added support for the Rambo reprap electronics board. Added Mcodes to set ... motor current and microstepping pins.	2012-08-30 00:16:57 -07:00
Blair Thompson	dcd3e8a211	Tidy up	2012-08-29 22:53:41 +01:00
Blair Thompson	ddd9d0cfd4	Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included.	2012-08-29 21:08:41 +01:00
Erik vd Zalm	0e58ef6805	Some dialogs are corrected	2012-08-29 21:15:59 +02:00
Erik vd Zalm	0e89022cc3	Correct temptable_55 name.	2012-08-28 19:47:22 +02:00
Bracken Dawson	47d4f55bc0	Fix Gen7 1.4 pinout ... Gen7 1.4 uses very different pin assignments, might as well make a new section and remove some of the conditionals from each. It's easier to change your pin assingment this way if like me you don't wire it exactly to plan.	2012-08-22 23:15:46 +01:00
elgambitero	6cd150842f	Update Marlin/language.h ... Some dialogs corrected and Default language set to 1	2012-08-22 21:46:22 +03:00
elgambitero	299c18596f	Update Marlin/language.h ... Some dialogs are corrected	2012-08-22 21:44:57 +03:00
ErikZalm	b86336c3f5	Merge pull request #221 from daid/Marlin_v1 ... Long filename support for LCD display	2012-08-22 06:30:35 -07:00
daid	b69e75c89a	Added long filename support.	2012-08-22 14:49:57 +02:00
stohn	1d224cc031	merged with upstream and FIXED AGAIN bad translation commit ... PLEASE BE MORE CAREFUL WHEN SUBMITTING NEW TRANSLATIONS When you add new menu items / messages always copy them to ALL languages (just use english)	2012-08-22 13:05:42 +02:00
stohn	06c03fe2f0	new method for message for making KILLED message visible ... The cli(); at the start of the kill() function also stops the internal arduino timer which stops updating of millis() which prevents the display of the "KILLED." message. The new function updates the display directly without checking any timers.	2012-08-22 12:44:41 +02:00
daid	87ff61a8a6	Fix for #201	2012-08-22 10:54:55 +02:00
Blair Thompson	aacbebbebe	Added Menu Options to the Main-> Control->Temperature Submenu that allow the user to set new values for the ABS and PLA preheat function. EEPROM updated so that these settings can also be committed to EEPROM memory.	2012-08-21 23:46:10 +01:00
stohn	31873ec707	changed int to long to overcome overflow of number display ... - related bug reports: Issue #201, Issue #213	2012-08-21 16:47:39 +02:00
stohn	de0448343f	added KILL_PIN support / cleaned up manage_inactivity function definition	2012-08-21 14:48:29 +02:00
stohn	69961dbba3	fixed incorrect menu messages from last commit... ... - removed several multiple definitions of same message - fixed definition of missing messages in german and spanish - tweaked german translation (a lot) - added note about changing and testing this file	2012-08-21 14:44:20 +02:00
Blair Thompson	6c050b8440	Fixes error introduced at commit aee475aa55 which caused the sketch not to comile for language option 1. Several defines were removed but still referenced in ultralcd.pde	2012-08-20 21:54:47 +01:00
Blair Thompson	b9f9f8f7d3	The pre-heat ABS and PLA options in the LCD Menu were broken a while back. The pre-heat worked fine, but the cooling fans were not switching on as intended. This is now fixed.	2012-08-20 21:49:37 +01:00
elgambitero	d38b96fff1	Update Marlin/language.h	2012-08-12 22:45:11 +03:00
Erik vd Zalm	9f7f7354f5	Set default language 1	2012-08-12 21:29:42 +02:00
elgambitero	aee475aa55	Update Marlin/language.h ... Spanish language included. It features the LCD screen messages and a small part of the Serial messages.	2012-08-12 21:26:17 +03:00
Erik vd Zalm	9083966c22	Do not use feedrate multiiply on Z and E only moves.	2012-08-12 18:13:34 +02:00
Erik vd Zalm	5406c533db	Disable FAST_PWM by default. On some systems it does not work ok.	2012-08-11 15:51:04 +02:00
Erik vd Zalm	f92dc91c3d	Enable M503 also when eeprom is disabled	2012-08-11 15:49:40 +02:00
James Adams	35a1dd081f	no message	2012-08-11 15:33:35 +02:00
James Adams	5131ab19ca	Fixed Retract in LCD Menu	2012-08-11 15:29:40 +02:00
James Adams	96f4f90cb3	Added pause and retract lcd menu items	2012-08-11 15:29:33 +02:00
James Adams	e10355500d	Updated Language.h with pause, resume, and retract	2012-08-11 15:29:26 +02:00
ErikZalm	a97c006bbf	Merge pull request #195 from kobaan/Marlin_v1 ... Updated german translations in language.h	2012-08-11 01:45:30 -07:00
ErikZalm	f062794a0d	Merge pull request #208 from Enchiridion/Marlin_v1 ... Added support for dual Z axis stepper drivers	2012-08-11 01:42:49 -07:00
ErikZalm	57468d3c21	Merge pull request #210 from Dabble63/Marlin_v1 ... Add Duty Cycling to the Heater Bed	2012-08-11 01:42:02 -07:00
Dabble63	6b45e9f167	Add Duty Cycling to the Heater Bed	2012-08-11 09:17:47 +03:00
Ian Jackson	adee81170d	M206: save values in eeprom ... Really, we should have a way to adjust the XYZ homing of a machine in the eeprom. So as the second stage of this, make the M206 home offset parameters subject to the M500/M501/M502/M503 eeprom commands. Bump the eeprom version to "V06". Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>	2012-08-11 01:43:00 +01:00
Ian Jackson	1dba212e18	HOMEAXIS: make into a function ... Replace the large macro HOMEAXIS with a function. This avoids the compiler generating three copies of largely identical code. The saving is 724 bytes of program memory. We make use of XYZ_CONSTS_FROM_CONFIG to provide convenient array-shaped access to MAX_LENGTH, HOME_RETRACT_MM and HOME_DIR. Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>	2012-08-11 01:43:00 +01:00
Ian Jackson	7bb326d389	eeprom: provide smaller code for SERIAL_ECHOPAIR ... SERIAL_ECHOPAIR implies, eventually, two calls to MYSERIAL.print. One of these has FORCE_INLINE for a per-character loop, and both involve constructing a method call rather than a simple function call. Produce better and smaller code by providing three specialised functions serial_echopair. This saves 672 bytes of program memory (with EEPROM_SETTINGS and SDSUPPORT enabled). Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>	2012-08-11 01:42:59 +01:00
Ian Jackson	957e966d2d	M206: always use homing ("homeing") offsets ... Previously the parameters set in M206 would only be used if a G82 command was sent with specific axis home values. This limits its usefulness. Really, we should have a way to adjust the XYZ homing of a machine in the eeprom. So as the first stage of this, make M206 affect every home command. The values set using M206 are now added to the configuration variables [XYZ]_HOME_POS. This is achieved by replacing all uses of [XYZ]_HOME_POS in the code by a new home_pos[] which includes the adjustment. We also have to adjust the uses of [XYZ]_{MIN,MAX}_POS similarly - see below. To allow axis_is_at_home to be written as a function taking an axis index rather than a macro taking an axis letter, we provide constant arrays in program memory containing the values of [XYZ]_{MIN,MAX,HOME}_POS from the compiled-in configuration. This is done with some helper macros to deal with the declaration (XYZ_CONSTS_FROM_CONFIG) and definition of the inline function which does the program memory access. We also introduce the overloaded function read_pgm_any, whose instances are produced with DEFINE_PGM_READ_ANY, which allows the access functions to automatically produce the correct type. The type- and pointer-massaging code in the access function boils down, when compiled, to a simple program memory access. A question arises: if the M206 offset is set, should this adjustment to the home position shift or change the possible range of movement permitted by the software endstops ? The documentation in Configuration.h describes these limits as: // Travel limits after homing Since this is a file containing physical limits, and actual suggested values for these configuration parameters appear to include a certain amount of slop, I've taken the view that these should be regarded as nominal physical distances from the limit switches, and that the permissible travel should be unaffected by M206. So for example with the (rather unrealistic) #define X_HOME_DIR -1 #define X_MIN_POS -20 #define X_HOME_POS 0 #define X_MAX_POS 100 no matter the setting of M206 X, the machine would be permitted to move from 20mm "beyond" the limit switch trigger point in the negative X direction and 100mm away from the limit switch in the positive X direction, for a total travel of 120mm. With M206 X-10 that would be considered to correspond to X coordinates -30 to +90. With M206 X+10 that would be considered to correspond to X coordinates -10 to +110. fixes #200 (in ErikZalm/Marlin). Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>	2012-08-11 01:35:03 +01:00
Ian Jackson	faccb35850	software_endstops: use *_MIN_POS and *_MAX_POS for arcs ... If [XYZ]_HOME_POS and [XYZ]_MIN_POS aren't 0, these corrections are wrong. Use the same logic as in Marlin.pde:prepare_move: ie, clamp to [XYZ]_{MIN,MAX}_POS. While we're here, put this cut-and-paste code in a function clamp_to_software_endstops. Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>	2012-08-10 19:36:30 +01:00
Ian Jackson	3f15b7c7b8	Makefile: Better display of size (device memory usage) ... Run avr-size with the --mcu=... -C option as well. That reports how much actual device program and data memory is used along with a percentage fullness. Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>	2012-08-10 19:36:30 +01:00
Ian Jackson	0c35facc94	Makefile: support V=1 ... Often it can be useful to see the actual commands being run by make. Other projects (eg, the Linux kernel) support this with a "V=1" make parameter. Do the same here. Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>	2012-08-10 19:36:29 +01:00
Ian Jackson	71404eef29	.gitignore: Add *~, *.orig, *.rej, move to root directory ... Move the .gitignore out of the Marlin subdirectory so it applies to the whole tree, and add some missing patterns. Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>	2012-08-10 19:36:29 +01:00
Ian Jackson	a873541ef6	Marlin.pde: include comment for emacs mode ... Emacs by default doesn't recognise a ".pde" file as C++ source code. Add the annotation to the top of the file to make it work. Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>	2012-08-10 19:36:29 +01:00
Enchiridion	50cde90324	Added support for dual Z axis stepper drivers	2012-08-04 00:32:26 -06:00
kobaan	603a5e25b3	Updated german translations in language.h and eliminated a few double lines.	2012-07-16 14:26:28 +03:00
Chris Palmer	538189cc19	Fixed soft limits when the origin is in the middle. ... HOME_POS is now always where the endstop is and can be outside the limits. The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH. The Z is axis now homed first if direction is away from the bed. Saguinololu limit pins change from MIN to MAX according to the homing direction.	2012-07-14 22:24:26 +02:00
ErikZalm	686011a548	Fixed typo	2012-07-14 17:25:35 +03:00
Erik van der Zalm	cd57bf305b	Merge git://github.com/daid/Marlin into Marlin_v1 ... Added invert step pins to corexy code	2012-07-14 15:07:14 +02:00
Erik van der Zalm	ea2c19f978	Added CoreXY support (Thanks Ilan Moyer)	2012-07-14 14:21:53 +02:00
Erik van der Zalm	aa65fe22ed	decoupled axes sucessfully at least on pure x or y jog	2012-07-14 13:43:19 +02:00
daid	12de8fff81	Support step motor controllers with active low step pins.	2012-06-29 16:27:47 +02:00
Erik van der Zalm	b67dacdc8f	Fixed AD595 define	2012-06-11 17:33:42 +02:00
Bernhard	d3002ef741	corrected retract	2012-06-03 16:56:40 +02:00
Bernhard	0c123950e9	__ header file replace	2012-06-02 20:44:17 +02:00
Bernhard	bf077125b9	added firmware retract. disabled by default	2012-06-02 20:32:28 +02:00
Bernhard	0e5e249ab5	added individual pullup setting option to have finer control in case there is a special z-min sensor, for example	2012-06-02 13:47:50 +02:00
Bernhard Kubicek	6b14f95b3e	Merge pull request #170 from linagee/Marlin_v1 ... Marlin v1	2012-06-02 03:46:56 -07:00
Bernhard Kubicek	c7ce99d495	Merge pull request #172 from daid/Marlin_v1 ... Add M401 - Wait for user to press button on LCD (with optional timeout) minor fix in M115.	2012-06-02 03:44:03 -07:00
Bernhard Kubicek	b7fc14bc65	repaired thermistortable_6 by graphcial fitting of the off-slope values. see issue 179. Erik, I know you asked for no changes, but this file probably is not related and hopefully allright.	2012-05-30 14:14:36 +03:00
ErikZalm	9e1021efbe	Fixed SL bug.	2012-05-28 22:32:53 +03:00
Daid	e9bec9b6fe	Fixed E1_ENABLE pin for Ultimaker. This was wrong for the 1.5.4 and 1.5.3 PCB (I cannot check the 1.5.6)	2012-05-24 18:36:55 +02:00
linagee	fbd282b3ba	Update Marlin/Configuration.h	2012-05-20 13:19:28 -06:00
linagee	2e8c5049c5	Update Marlin/thermistortables.h	2012-05-20 13:18:45 -06:00
linagee	2d0d8e5272	Small correction.	2012-05-20 11:09:07 -06:00
Daid	4d7fe7115f	Changed M401 to M0/M1 as suggested, so they match normal CNC stop commands.	2012-05-20 14:37:30 +02:00
linagee	9e9db65c3f	Update Marlin/thermistortables.h	2012-05-20 05:51:29 -06:00
linagee	bd966ef389	Update Marlin/thermistortables.h	2012-05-20 05:49:01 -06:00
linagee	775da3f103	Added top ratings and extended to ADC=1 for table 3 and 5.	2012-05-20 05:35:57 -06:00
linagee	96a4baa0be	Update Marlin/thermistortables.h	2012-05-20 04:55:22 -06:00
linagee	2aa9f7b131	Update Marlin/thermistortables.h	2012-05-20 04:35:28 -06:00
linagee	c4490f5f3d	Update Marlin/Configuration.h	2012-05-20 04:27:52 -06:00
linagee	dd9144994e	Tested May 19 - It works! Verified with separate thermocouple TM-902C also.	2012-05-20 04:13:29 -06:00
linagee	4c37d0d9f1	Extended range above 250C. (Operating range states up to 300C)	2012-05-20 04:01:30 -06:00
Daid	b59724e42b	Add strigification for extruder amount in M115 report.	2012-05-19 19:01:14 +02:00
Daid	16413bb8f2	Last M401 update, refresh the LCD during an M401 wait.	2012-05-19 18:53:56 +02:00
Daid	b3941fce5c	Update after testing	2012-05-19 18:48:43 +02:00
Daid	d494688565	Do not initialize in the header file.	2012-05-19 17:57:52 +02:00
Daid	516ec90242	Add M401 - Wait for user on LCD button press	2012-05-19 17:54:07 +02:00
Daid	7244aa7eb7	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	2012-05-19 17:38:46 +02:00
linagee	de2ca3b2e8	Grammar correction.	2012-05-19 07:40:35 -06:00
linagee	c2fc466e1b	Update Marlin/Configuration.h	2012-05-19 05:56:17 -06:00
linagee	241f5a4c0e	Update Marlin/thermistortables.h	2012-05-19 05:52:12 -06:00
linagee	9f9f498491	Update Marlin/Configuration.h	2012-05-19 05:47:30 -06:00
Erik van der Zalm	e31bef31ad	Limit PID autotune PWM to PID_MAX	2012-05-16 19:32:23 +02:00
ErikZalm	b2a9ccdb97	Merge pull request #159 from MaikStohn/Marlin_v1 ... Marlin v1 - BUG FIXES / CORRECTIONS	2012-05-16 12:32:35 -07:00
Erik van der Zalm	d459fb41b7	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	2012-05-16 19:22:08 +02:00
ErikZalm	804e0d6117	Merge pull request #164 from guanix/Marlin_v1 ... Melzi support	2012-05-16 12:21:48 -07:00
Erik van der Zalm	ba96059203	add additional dropsegments test	2012-05-16 19:21:44 +02:00
zittix	fbd91ab0b5	Fixes #153 for bad call to abs()	2012-05-16 18:17:34 +02:00
MaikStohn	b51c06e2b3	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	2012-05-11 16:57:08 +02:00
MaikStohn	159ae90874	bug fix for scrolling of main menu when using SMALL_DISPLAY (2 lines only)	2012-05-11 15:23:10 +02:00
MaikStohn	e48f5aa6a7	fixed typo	2012-05-11 15:22:06 +02:00
MaikStohn	1efe9ab497	changed encoder pos from int to long to fix problems setting x/y/z/e stepps_per_mm using the lcd menu	2012-05-11 15:19:09 +02:00
Guan Yang	602c8ee02b	Melzi support	2012-05-09 18:37:07 -04:00
Daid	279d00da9f	Fixed #if for Ultimaker.	2012-05-09 10:50:44 +02:00
Bernhard Kubicek	451f9cc6d1	Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.	2012-05-09 08:05:13 +03:00
Erik de Bruijn	e3fe1f0d00	Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed. ... Turning off the protection might be beneficial to those who want to do fast and long reversals.	2012-05-08 17:44:08 +02:00
Erik de Bruijn	d88205d89d	Suggestion to improve (TODO), no actual code changed	2012-05-08 17:43:57 +02:00
Erik de Bruijn	5aa80e6c05	Made language.h more flexible. Automatically do the right defines based on MOTHERBOARD == 7 ? "Ultimaker" : "Mendel"	2012-05-08 17:43:02 +02:00
MaikStohn	b657a18449	Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings" ... This reverts commit 3682d9bd5b.	2012-05-04 12:24:07 +02:00
MaikStohn	d188ae4c9d	added missing declaration of buttons_init() ... This is required when moving the buttons_init() function to the lcd_init() function	2012-05-03 15:48:44 +02:00
MaikStohn	3682d9bd5b	magic PROGMEM defines to avoid hundreds of wrong GCC warnings	2012-05-03 15:43:23 +02:00
MaikStohn	032df0b2c6	Moved LCD initialization out of constructor ... Since the class "MainMenu" was used within a static variable the initialization of the object (constructor call) was done before Arduino library startup. It always caused a crash when using AVRStudio with JTAG debugger (caused from calling the LCD initialization / the lot of I/O work / the stack used during this calls). By moving the LCD_INIT out of the constructor and using an explicit call inside of Arduino setup() implementation immediately fixed all problems and the JTAG debugger runs fine.	2012-05-03 14:28:17 +02:00
MaikStohn	bd1ad7c76a	explicit includes to make it compile with AVRStudio/Eclipse	2012-05-03 14:22:43 +02:00
MaikStohn	060b38de5c	delete obsolete and wrong code ... "i" runs from 0 to 4 but "add_homeing" array size is 3 only. On the other hand the calculated value gets overwritten by either one of the if choice.	2012-05-03 14:15:46 +02:00
MaikStohn	789ba02d43	fixed typo in comment	2012-05-03 14:13:53 +02:00
Erik van der Zalm	1874cb71a6	Added option to increase the FAN PWM frequency.	2012-05-02 19:26:14 +02:00
Erik van der Zalm	6a5a34e0ff	Small cleanup	2012-04-30 13:37:49 +02:00
Erik van der Zalm	e3821bd86f	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	2012-04-30 13:36:27 +02:00
Erik van der Zalm	02af69911e	Added temperature window to M109. This is needed for systems with no overshoot PID.	2012-04-30 13:36:19 +02:00
ErikZalm	e203b8c754	Merge pull request #154 from daid/Marlin_v1 ... Added 2nd extruder temperature LCD readout and setting.	2012-04-28 13:19:55 -07:00
ErikZalm	362ddc4efc	Merge pull request #155 from Atntias/patch-1 ... adding M120 and 121 for turning on and off the endstops only for homing	2012-04-28 13:19:19 -07:00
sefi	c27081aa4a	Fix to allow M120/M121	2012-04-28 17:35:51 +03:00
sefi	e11e072eca	adding M120 and 121 for turning on and off the endstops only for homing function	2012-04-28 17:31:22 +03:00
Daid	8e68c6cf89	Show proper temperature for extruder 2	2012-04-27 15:00:01 +02:00
Daid	8503b78876	Added support for 2nd extruder temperature to UltraLCD	2012-04-27 14:51:32 +02:00
Logan Bowers	3eacb4c16d	Wrap the call to turn off the bed heater in a #if to prevent a compile error on boards that do not have a bed heater	2012-04-25 19:22:38 -07:00
Bernhard	e4d2138dbd	reinitialize the lcd, if the SD card is inserted or removed. It seems that LCDs can confused by electrical discharges from time to time. ... Since a removal or insert of the sd card takes a long time in firmware, just reinitializing the lcd does not hurt. actually, it solves a problem with the UltiControlle	2012-04-22 21:12:17 +02:00
Bernhard	464b755918	added support for the UltiController	2012-04-22 20:55:56 +02:00
Bernhard	44fd8d46d2	fixed quickhome	2012-04-22 20:44:27 +02:00
Bernhard	33bb044d7c	fixed catsting to (int)e in serial error messages. ... see https://github.com/ErikZalm/Marlin/issues/148	2012-04-22 20:04:39 +02:00
ErikZalm	c2557abc03	Merge pull request #138 from triffid/fix-makefile ... make should rebuild if configuration or Makefile is changed	2012-04-15 10:21:46 -07:00
Erik van der Zalm	67cf105bc6	Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp) ... Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.	2012-04-15 19:17:33 +02:00
Erik van der Zalm	8aee9d51b6	Disabled disable_heater in PID_autotune.	2012-04-12 21:12:31 +02:00
Daid	414408b2d0	Fix for wrong systax in #ifdef.	2012-04-12 14:01:30 +02:00
Michael Moon	77d503fa13	Fix Makefile	2012-04-11 11:39:35 +10:00
Erik van der Zalm	cf7c8c458f	Fixed MAX6675	2012-04-10 21:57:57 +02:00
grrf	03b0850e63	This breaks temperature readout for pronterface!	2012-04-09 23:37:34 +03:00
tgiphil	ad8bc71d3e	- Fixed a typo	2012-04-07 20:01:31 -07:00
Erik van der Zalm	46feae79c6	Fixed typo in arc	2012-04-02 17:19:20 +02:00
Erik van der Zalm	4ca2f336f0	Changed default MINIMUM_PLANNER_SPEED -> 0.05 ... Fixed small bug in arcs M105 prints now actual_temp/target_temp	2012-04-01 16:23:40 +02:00
Erik van der Zalm	ae0bf8068b	Fixed arc offset.	2012-03-27 19:03:33 +02:00
Erik van der Zalm	0c1b863755	Ignore ":" in comments.	2012-03-25 14:41:26 +02:00
Erik van der Zalm	63aec3c56e	Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart. ... Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp	2012-03-25 14:36:51 +02:00
ErikZalm	8b785f75a6	Merge pull request #123 from buserror-uk/for-upstream ... For upstream	2012-03-23 11:54:58 -07:00
Tommy Cheng	520f1a54a8	Fix compilation error when PIDTEMP is undefined and ULTIPANEL is defined.	2012-03-24 02:26:59 +08:00
Michel Pollet	5550e893d5	New board variant, Open Motion Controller ... Open Hardware board currently used by the group build of http://tvrrug.org.uk The board can be found at http://solderpad.com/folknology/open-motion-controller/ Signed-off-by: Michel Pollet <buserror@gmail.com>	2012-03-22 13:51:21 +00:00
Michel Pollet	aa6e6e914e	Makefile: Redone ... + Removed most explicit pathnames, use the standard make "VPATH" to let make find the files for itself. + Added a "hardware variant" variable that allows compiging Sanguino and Gen7 as well as "generic" arduino. + Allows overriding the MOTHERBOARD define from the Makefile + Removed the 'preprocessor' bit that wasn't needed, now just "include" the files that are needed, since it allows gcc to show the right file/line when displaying error/warnings. + Uses gcc's own dependency generator to generate the .d files, and and include these instead of self-patching the makefile Signed-off-by: Michel Pollet <buserror@gmail.com>	2012-03-22 13:48:10 +00:00
Bernhard	0183e6332a	made prepare->autostart independent of current folder.	2012-03-19 20:24:40 +01:00
Bernhard	1532200435	found error in filenames. ... One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely	2012-03-19 20:06:58 +01:00
Erik van der Zalm	b985e4a134	Fixed compile errors in ultralcd when no ultra_lcd is selected.	2012-03-15 22:29:31 +01:00
Erik van der Zalm	2e749d60c3	Added DISABLE_MAX_ENDSTOPS	2012-03-12 20:32:14 +01:00
Erik van der Zalm	33f5697888	PPID tune exports more constants.	2012-03-11 22:18:25 +01:00
Erik van der Zalm	b44055cc51	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	2012-03-11 18:03:00 +01:00
Erik van der Zalm	f5eae52098	Added more manage_inactivity checks	2012-03-11 17:59:44 +01:00
ErikZalm	19a47dae4a	Merge pull request #99 from Justblair/master ... Better pin configuration for rotary encoder in RAMPS boards	2012-03-11 04:34:59 -07:00
Erik van der Zalm	910f4e77a2	Added 20MHz support.	2012-03-11 12:25:04 +01:00
ErikZalm	7cefad3744	Merge pull request #106 from bgamari/Marlin_v1 ... Make F_CPU dependence of stepper.cpp more explicit	2012-03-11 01:48:30 -08:00
Erik van der Zalm	87ff2f8867	Added CONTROLLERFAN. (Controlling a fan to cool down the steppper drivers)	2012-03-11 10:44:10 +01:00
Erik van der Zalm	387fe51a56	Do not disable steppers when there are moves in the queue.	2012-03-09 20:20:01 +01:00
Erik van der Zalm	421264e58a	Fixed typo	2012-03-09 17:49:48 +01:00
Erik van der Zalm	15ad923310	Removed !!!. Stupid arduino bootloader can't handle this.	2012-03-09 17:42:32 +01:00
Erik van der Zalm	61e09e6be2	Added FAN_PIN -1 checks	2012-03-08 22:09:49 +01:00
Erik van der Zalm	87c4e06c24	Corrected active_extruder when autotemp is used.	2012-03-08 22:04:13 +01:00
Erik van der Zalm	7b1e295f34	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	2012-03-08 21:48:06 +01:00
Erik van der Zalm	c077316b2b	Added PID autotune. (experimental) ... M303 Starts autotune. Wait till the Kp Ki and Kd constants are printed. Put these values in Configuration.h	2012-03-08 21:43:21 +01:00
Ben Gamari	49b228c4b3	Add instructions to regenerate speed_lookuptable when changing F_CPU	2012-03-07 18:11:03 -05:00
Ben Gamari	96509494f0	stepper: Clarify comment on timer-counter configuration	2012-03-07 18:11:01 -05:00
Ben Gamari	6d7e6a11fc	Add create_speed_lookup	2012-03-07 18:11:01 -05:00
Tommy Cheng	ce07c9186d	While Waiting for hotbed to warm up via M190, LCD Display and Click Encoder input freeze until target temperature is reached.	2012-03-05 23:12:26 +08:00
Erik van der Zalm	116dc86b8a	Fixed type in e-jerk	2012-03-04 23:09:13 +01:00
Blair Thompson	02ee9e3d30	Changed Pin Assignment for the RAMPS motherboard so that LCD and Rotary encoder are all wired to AUX-4 ... This simplifies wiring for those with RAMPS 1.3 and 1.4 boards.	2012-03-04 21:34:20 +00:00
Erik van der Zalm	e056bf8081	Added E-Jerk	2012-03-04 16:34:58 +01:00
Erik van der Zalm	4deeffbc88	Added missing defines to the german section. ... Translation still needed.	2012-03-04 14:08:20 +01:00
Erik van der Zalm	632528aa95	merging with SCUBA82	2012-03-04 13:41:47 +01:00
Erik van der Zalm	aac7aa3bf0	Queued fan control. Issue #90	2012-03-04 13:05:26 +01:00
Christian Thalhammer	fde51084f3	set SD file delete to M30; switch printime output to M31	2012-03-03 21:58:12 +01:00
Erik van der Zalm	21e2bae063	Changed (corrected?) SD_card comment handling.	2012-03-03 21:28:33 +01:00
Erik van der Zalm	e509bbf636	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	2012-03-03 20:41:22 +01:00
Erik van der Zalm	072011a3ef	Added current_block = NULL to quickStop()	2012-03-03 20:40:46 +01:00
ErikZalm	2422a857a1	Merge pull request #96 from haxar/Marlin_v1 ... make analog2tempBed return a precise celsius reading for BED_USES_THERMISTOR, ...	2012-03-03 11:24:58 -08:00
Erik van der Zalm	f598077af3	Removed vc files	2012-03-03 20:22:42 +01:00
Erik van der Zalm	cb0c84e075	Merge remote-tracking branch 'justblair/master' into Marlin_v1	2012-03-03 20:20:55 +01:00
ErikZalm	1d5809d458	Merge pull request #88 from daid/Marlin_v1 ... Made plan_buffer_line arguments const...	2012-03-03 11:18:14 -08:00
Erik van der Zalm	ed951b1977	Fixed RAMPS 1.2 support (Found and fixed by rrhb)	2012-03-03 20:15:41 +01:00
Blair Thompson	4879de08e8	The percent complete for the SD file statistic sits squint. Changed "lcd.Setcursor (7,2);" to "lcd.Setcursor (10,2);". ... The percent complete now lines up with the temperatures and Z-axis position figures, nicer to read and nicer to look at IMHO.	2012-03-03 16:47:27 +00:00
Blair Thompson	f278e1c00f	This is in my opinion a much better way of dealing with SD cards than my previous fix. ... Instead of adding a momentary switch to fake the insertion of the card I have modified the ultralcd menu item: Card Menu -> Refresh to reinitialise the card providing that the SDCARDDETECT pin has been set to -1 in the pins.h file. This requires one less switch on the front panel and the refresh menu item is in the most relevent place for a user who wishes to inert a card and then print from it. It also means that the "Card inserted" messages do not bother the users of these card readers (they dont make sense for users without SCCARDDETECT)	2012-03-03 16:30:31 +00:00
Blair Thompson	046a8e0039	Added more defines to the language.h file so that nowe most of the text strings are now configured via this file. Still got some hunting down to do to complete this task.	2012-03-03 15:51:47 +00:00
haxar	79a466ca26	make analog2tempBed return a precise celsius reading for BED_USES_THERMISTOR, complementing changes to analog2temp in d15f01e	2012-03-02 17:15:21 -08:00
Christian Thalhammer	5f3a422e68	added M31 - delete file from sd card	2012-03-02 21:49:05 +01:00
Christian Thalhammer	fa2e3a40e9	fixed LCD manual z axis move Feedrate to 70 (was 1700)	2012-03-01 14:38:50 +01:00
Christian Thalhammer	a92b3afe64	added german translation;Menue should be in english.. sounds better	2012-03-01 14:24:20 +01:00
Christian Thalhammer	9fa586bbed	fixed languages; Preheat_PLA and Preheat_ABS was not defined for non ... english	2012-03-01 14:05:40 +01:00
Daid	00d33e6b82	Typo fix	2012-02-29 19:01:21 +01:00
Daid	7d124478fa	Only protect the heater pins for the defined extruders. ... Changed the way the extruder pins are defined so it doesn't create extra -1 entries in the list.	2012-02-29 15:49:02 +01:00
Daid	3d83109028	Fixed general 16x2 LCD build without SD support.	2012-02-29 15:33:23 +01:00
Christian Thalhammer	cb02914687	Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1	2012-02-29 14:51:35 +01:00
Christian Thalhammer	10bf2bb8e1	-	2012-02-29 14:51:15 +01:00
Daid	d47b666630	Merge branch 'Marlin_v1' of git://github.com/ErikZalm/Marlin into Marlin_v1	2012-02-29 12:19:20 +01:00
Daid	88d289caa1	Made plan_buffer_line arguments const, which optimizes better and fixes the RUNOUT_PREVENTION feature.	2012-02-29 11:38:12 +01:00
Erik van der Zalm	b4833d55c2	Fixed HOME_POS in combination with G28 X0 or G28 Y0	2012-02-28 18:20:03 +01:00
Erik van der Zalm	c6f2ec3c82	remove stop_heating_wait	2012-02-27 18:45:45 +01:00
Erik van der Zalm	b48d67ce10	Fixed homing	2012-02-27 18:31:40 +01:00
ErikZalm	071eec7aa7	Merge pull request #81 from phord/09469add5560ca8a676c42e4bcd499868c33f0dd ... Clean up and add some trace info	2012-02-27 08:38:36 -08:00
ErikZalm	1ebe7d1ab6	Merge pull request #83 from phord/tempfix ... Add explicit #define for bogus temp override	2012-02-27 08:36:45 -08:00
Phil Hord	b65ef8d66c	Add support for upcoming Gen7 v1.4 ... V1.4 moves thermistor power to the always-on 5v line. The BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE is no longer needed on this board. Add a new motherboard type to support this feature.	2012-02-26 20:39:49 -05:00
Phil Hord	740f0c7690	Add explicit #define for bogus temp override ... The code to ignore the "bad thermistor reading failsafe" suicide function depends on the existing of the PS_ON pin feature. But in some boards this shouldn't be the case Fix this by adding an explicit definition to make our intentions more clear and separable.	2012-02-26 20:26:16 -05:00
Phil Hord	ba8500a236	pins.h: Define Z_MAX_PIN for Gen7 board ... The Z_MAX_PIN value was defined as no-value, but this causes the compile to fail. Fix this by setting the Z_MAX_PIN to the correct value (which happens to be 0 for pin PB0/DIO0/0).	2012-02-26 20:18:39 -05:00
Phil Hord	09469add55	Add board reset reporting (from Repetier-Firmware)	2012-02-26 18:26:56 -05:00
Phil Hord	f3101e96d9	Add suitable .gitignore to avoid build noise	2012-02-26 18:26:56 -05:00
Phil Hord	245dca4bee	Makefile: generic pde=>cpp rule ... This adds flexibility to the makefile by allowing different pde targets to be specified for different needs.	2012-02-26 18:26:55 -05:00
Erik van der Zalm	97d42ca2b2	SDSUPPORT default disabled	2012-02-26 22:05:38 +01:00
Changwoo Ryu	7b14953c99	Fix build on Sanguino based boards with ATmega1284P	2012-02-27 04:12:55 +09:00
Daid	286d5003fa	Fixed compiler warning for Sanguino compile	2012-02-26 17:35:01 +01:00
ErikZalm	66d50562b6	Merge pull request #76 from iXce/Marlin_v1 ... Fix Makefile	2012-02-26 07:30:51 -08:00
Erik van der Zalm	27f595a444	Changed version => RC2	2012-02-26 16:26:40 +01:00
Erik van der Zalm	018c567abf	Moved SLOWDOWN function. (jetty840) ... Included AD595 calibration options. (daid)	2012-02-26 16:23:47 +01:00
Erik van der Zalm	4fbda5c3f5	Merge remote-tracking branch 'daid/Marlin_v1' into Test	2012-02-26 16:10:59 +01:00
Erik van der Zalm	ce714fe306	Fixes in pins.h	2012-02-25 22:55:17 +01:00
Erik van der Zalm	35e57bf149	Added gen6 deluxe.	2012-02-25 17:44:45 +01:00
Erik van der Zalm	84ea2d61e8	Moved gen7 boards to motherboard type 10, 11 and 12. ... Split ramps1.3 in Sprinter like config and multiextruder config.	2012-02-24 23:34:41 +01:00
Guillaume Seguin	adc108d79e	Correctly build the produced applet/Marlin.cpp source	2012-02-24 21:21:19 +01:00
Erik van der Zalm	5aa9c41ab1	Changed comment mode for detection. ... Added M221 extuder multiply factor.	2012-02-24 20:42:07 +01:00
Erik van der Zalm	00690f7ffd	Fix cast warning in Gen7	2012-02-23 18:50:05 +01:00
Erik van der Zalm	01d28c18ab	Fixed casting warning in sanguino	2012-02-23 18:45:37 +01:00
Blair Thompson	2fd8c248fe	Added Fan control to the pre-heat settings. ... I find that the PID routine works better when the cooling fan is switched on at the beginning of a warm up routine. Otherwise when you enable the fan just before a print, you have a delay as the PIDre-adjusts. This should also be safer as most cooling fans are directed at the hot -ends thermal barrier!	2012-02-22 23:05:52 +00:00
Blair Thompson	d9f2f509d5	Added new menu items under the prepare submenu. ... Instead of a single pre-heat, now there is pre-heat ABS and PLA options Added defines to the configuration file to adjust preheat temperatures for both	2012-02-22 22:51:04 +00:00
Erik van der Zalm	ae3e7586c6	Added HOME_POS. This adds the posibility to make the center 0 ... Updated the Xsteps ... settings via the LCD menu	2012-02-22 18:07:56 +01:00
Erik van der Zalm	df1437bd86	Changed display format for some numbers.	2012-02-21 23:05:43 +01:00
Erik van der Zalm	8816ef1c64	Small fixes after merge	2012-02-21 20:36:43 +01:00
Erik van der Zalm	d298dd121f	merged SBUBA82 and Justblair	2012-02-21 20:26:59 +01:00
Erik van der Zalm	2cc9a89830	Merge remote-tracking branch 'SCUBA82/Marlin_v1' into Marlin_v1	2012-02-21 20:17:35 +01:00
Erik van der Zalm	a0a1f81913	various changes	2012-02-21 20:17:28 +01:00
Christian Thalhammer	8a8ea50f33	fixed manual axis movement lcd option	2012-02-21 09:31:28 +01:00
Blair Thompson	b976692d0f	Removed VS project files for tidyness stakes	2012-02-20 22:39:39 +00:00
Blair Thompson	fe940a142d	Added a structure that will allow easy translations/modifications to the LCD menu. ... Signed-off-by: Blair Thompson <mail@justblair.co.uk>	2012-02-20 22:22:46 +00:00
Christian Thalhammer	b3fb09a20c	change preheat to ABS values of nozzle 227 and be 105 �C ... next try for manual axis movement	2012-02-20 16:07:27 +01:00
Blair Thompson	a05a261b72	Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich ... that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card	2012-02-18 23:56:31 +00:00
Blair Thompson	1b6765ed12	Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface	2012-02-18 18:25:04 +00:00
Christian Thalhammer	1ff99ae25f	ATMega1284P support for Arduino IDE ... replace $ARDUINO_HOME/hardware/tools/avr/etc/arduino.conf with this file	2012-02-17 11:41:47 +01:00
Christian Thalhammer	e661578c84	support for GEN7 1.1,1.2 and 1.3	2012-02-17 10:46:48 +01:00
Daid	73344e69c1	Added temperature offset/gain settings for AD595.	2012-02-16 11:05:08 +01:00
Christian Thalhammer	d309565b56	Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 ... Conflicts: Marlin/Configuration.h	2012-02-13 13:07:55 +01:00
Christian Thalhammer	0e3631ff4b	smaller changes	2012-02-13 12:31:53 +01:00
Erik van der Zalm	fa2e1be0ca	changed default EXTRUDE_MINTEMP to 170.	2012-02-12 17:38:54 +01:00
Erik van der Zalm	7699f250e3	Fixed small merge bug	2012-02-12 14:06:08 +01:00
Erik van der Zalm	11518a987f	merged with triffid fork	2012-02-12 13:58:36 +01:00
Erik van der Zalm	13e185d330	removed unused HEATING_EARLY_FINISH_DEG_OFFSET ... Simplified stepper inactive time	2012-02-11 23:22:16 +01:00
Erik van der Zalm	b58eae7657	Corrected e-length calculation in planner	2012-02-11 18:36:42 +01:00
daid	2a77c84c8f	Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.	2012-02-11 16:02:47 +01:00
Erik van der Zalm	d47a3e5950	Changed check i mtion_conrol ... if (millimeters_of_travel == 0.0) => if (millimeters_of_travel < 0.001) (thanks mooselake)	2012-02-09 21:02:01 +01:00
Erik van der Zalm	f87c80889f	Fixed M109 timer overflow (reported by triffid)	2012-02-09 20:54:49 +01:00
Erik van der Zalm	154de69c02	Print configuration.h version during startup (thanks hairykiwi)	2012-02-09 20:26:17 +01:00
Erik van der Zalm	6ef8459494	Corrected distance calculation. (thanks jv4779)	2012-02-09 19:53:06 +01:00
Erik van der Zalm	598eb1d4f1	Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid)	2012-02-09 19:38:53 +01:00
Erik van der Zalm	9173a5713b	Teensylu support.	2012-02-09 19:27:45 +01:00
Erik van der Zalm	da040fd393	Fixed ultimaker heater 1 pins. (Thanks daid)	2012-02-09 17:19:45 +01:00
Erik van der Zalm	bdb70c0509	Warning for 10k thermistor	2012-02-08 18:38:45 +01:00
Erik van der Zalm	5113513cb2	RC 1	2012-02-08 18:28:54 +01:00
Erik van der Zalm	d8a0c6450f	Split the configuration file in two parts. ... One for common settings. One for advanced settings.	2012-02-07 20:23:43 +01:00
Christian Thalhammer	4cc8e37bf1	lcd menue "move_axis" added	2012-02-07 12:58:05 +01:00
Christian Thalhammer	b5fae1104b	fixed sUICIDE_PIN disable	2012-02-07 08:50:26 +01:00
Erik van der Zalm	f9c5333f97	Made "stop heating wait" optional. ... Default off.	2012-02-06 20:13:44 +01:00
Erik van der Zalm	292ddd2edb	Fix Z_LATE_ENABLE	2012-02-06 17:38:16 +01:00
Christian Thalhammer	25cd8af536	added arduino ide GEN7 support Files	2012-02-06 14:11:25 +01:00
Christian Thalhammer	14702089ee	-disable TEMP Min MAX Kill while using PS_ON Pin ... ON GEN7 there is no temperature reading when power is off.. so Marlin would kill itself. There seems to be an update from "Traumflug" on GEN7 using standby VCC for thermistors.	2012-02-06 12:28:33 +01:00
Christian Thalhammer	b51e8bf7e5	-disabled CARDDETECT if PIN is set to -1 ... - redo disable Beeper if PIN is set to -1	2012-02-06 12:22:44 +01:00
Christian Thalhammer	3183a14755	-added Configuration for GEN7 which worked for me	2012-02-06 12:12:18 +01:00
Christian Thalhammer	5edef148fe	-disalbe beeper if BEEPER_PIN = -1	2012-02-06 12:10:32 +01:00
Christian Thalhammer	13e2ad2831	- added info for using GEN7 configuration	2012-02-06 11:58:52 +01:00
Christian Thalhammer	59cc5f889e	- added support for ATMega1284P	2012-02-06 11:55:56 +01:00
Christian Thalhammer	a11f3b2d2f	- Pins for modified GEN7 assigned ... - Added support for ATMega1284	2012-02-06 11:49:23 +01:00
Erik van der Zalm	abb7e63906	fixed z-disable bug.	2012-02-05 21:14:55 +01:00
Erik van der Zalm	9f139d6e0e	Added MAX6675 support. (Thanks to gregfrost) ... Needs some work to remove the blocking in read max6675.	2012-02-05 13:05:07 +01:00
Erik van der Zalm	e45e5c68bb	Added support for Gen3+ (Pins file only) ... Added late z enable. (blddk request) Only calculate look ahead if >2 moves in buffer. Removed some FORCE_INLINE to save memory. Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>	2012-02-05 12:42:15 +01:00
Michael Moon	9c918a497b	more work on Makefile - actually rebuilds if Makefile or Configuration.h are altered, also much cleaner output	2012-01-25 20:46:27 +11:00
Michael Moon	ab01658fd2	local configuration stuff- WATCHPERIOD causes breakage, disable. few other misc changes	2012-01-24 17:02:45 +11:00
Michael Moon	42bedb3f60	PROGMEM elements must be const	2012-01-24 15:57:42 +11:00
Michael Moon	a991bde523	enable auto-reset before programming, disable afterwards	2012-01-24 14:25:28 +11:00
Michael Moon	3e575533c5	get M81 working	2012-01-24 14:24:41 +11:00
Michael Moon	2ae2ead97b	help residency not overflow	2012-01-24 14:24:24 +11:00
Michael Moon	71dc82e0b4	my local configuration	2012-01-24 13:19:37 +11:00
Michael Moon	5aadc2f5ca	cardreader needs to include some other files	2012-01-24 13:19:24 +11:00
Michael Moon	8d0916af13	allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications	2012-01-24 13:18:54 +11:00
haxar	6cc6029d7a	M109 EOL fix when TEMP_RESIDENCY_TIME is undefined; printer interface (pronterface) could not see target extruder heater temperature to continue print	2012-01-22 03:25:56 -08:00
Bernhard	157aa7f2fd	m115 eol fix	2012-01-15 20:51:49 +01:00
Bernhard	7aeb45303d	small mistake	2012-01-15 18:31:21 +01:00
Bernhard	cee5f9020a	added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.	2012-01-15 17:06:10 +01:00
Bernhard	3814bbb529	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
Bernhard	729cde4475	fix autostart failure if in wrong directory	2011-12-26 09:20:53 +01:00
Bernhard	396270a0de	fix duplicated definition of MOSI MISO pins in case motherboard==33	2011-12-26 09:20:21 +01:00
Bernhard	11f2dafc4e	one step closer to a functional makefile..	2011-12-22 16:43:28 +01:00
Bernhard	8463e39a4a	starting with sanguino arduino 1.0 compatibility	2011-12-22 16:11:15 +01:00
Bernhard	2bc160a978	add wiring.h, that can be used to overwrite: ... arduino-0023/hardware/arduino/cores/arduino/wiring.h this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino	2011-12-22 14:57:28 +01:00
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	2011-12-22 14:55:45 +01:00
Bernhard	3c1a4aac2b	header file simplification	2011-12-22 12:38:50 +01:00
Bernhard	212515148e	added m240 photography support. default off	2011-12-22 12:11:39 +01:00
Bernhard	6735025428	cooldown	2011-12-22 12:02:33 +01:00
Bernhard	415aadf704	lcd panel bed support ... advance and ultipanel not any more in default config	2011-12-22 11:45:52 +01:00
Erik van der Zalm	554cc1718d	Fiexed E_ENABLE_PIN errors	2011-12-15 11:59:07 +01:00
Erik van der Zalm	617968ab76	G92 fix	2011-12-12 20:43:47 +01:00
Erik van der Zalm	84d9cf7339	merging	2011-12-12 20:35:46 +01:00
Erik van der Zalm	e017228569	Merged multiple extruder support. ... Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	2011-12-12 19:34:37 +01:00
Bernhard	3320a5b37d	make autotemp compatile for use without pid	2011-12-11 22:25:52 +01:00
Bernhard	06411d5c9e	ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.	2011-12-11 22:18:50 +01:00
Bernhard	82c99625fa	instant stop of sd prints from the panel.	2011-12-11 22:10:06 +01:00
Bernhard	01001b89d2	repaired nozzle runout prevention to not collide with automatic stepper disabeling.	2011-12-11 15:42:56 +01:00
Bernhard	88ee053af0	heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.	2011-12-09 17:07:44 +01:00
Bernhard	b1d84d879b	st_synchronize back to normal..	2011-12-09 16:13:58 +01:00
Bernhard Kubicek	f6fe7143e4	Merge pull request #29 from k-eex/Marlin_v1 ... Fix M201 not saving settings in all places, so the changes did not get written into EEPROM	2011-12-09 06:37:42 -08:00
Bernhard	dde4b40fa9	disable steppers in runout prevention	2011-12-09 15:37:24 +01:00
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	2011-12-09 15:09:52 +01:00
Bernhard	aa4f9a6474	better values.	2011-12-09 14:09:34 +01:00
Bernhard	87fd249c43	made runout prevention independent of tempeorarily set esteps	2011-12-09 13:56:28 +01:00
Bernhard	1ec0c3b68a	extruder runout prevention.	2011-12-09 13:39:00 +01:00
Bernhard	5b4625f79c	added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.	2011-12-09 12:51:08 +01:00
Bernhard	cc4a9cdb69	added autostart procedure trigger to the ultralcd menu	2011-12-09 12:33:00 +01:00
Bernhard	61c943b4bf	fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.	2011-12-09 12:32:31 +01:00
Keegi	bae1e422f6	Fix M201 not saving settings in all places, so the changes did not get written into EEPROM	2011-12-08 12:25:32 +02:00
Bernhard	754d2d69b2	z homing sound fix, for now until the actual cause is found..	2011-12-07 23:08:13 +01:00
Bernhard	986f0ba76c	moved <stdio.h> to more dominant location.	2011-12-07 20:56:47 +01:00
Bernhard	460b788d78	repaired homing position setting.	2011-12-07 20:54:34 +01:00
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) ... - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	2011-12-06 00:09:16 -05:00
Bernhard	12e8edcac3	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	2011-12-04 22:27:37 +01:00
Bernhard	cf50ba140f	added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.	2011-12-04 22:26:42 +01:00
Erik van der Zalm	89e832c295	Update endstops only for homing. (use less resources when not used)	2011-12-04 21:03:02 +01:00
Erik van der Zalm	b99c49ec3b	Add option to only check endstop when homing	2011-12-04 20:17:21 +01:00
Erik van der Zalm	95a0b28acb	Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1	2011-12-04 19:54:43 +01:00
Erik van der Zalm	af22e9cd38	Some advance modifications	2011-12-04 19:54:07 +01:00
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. ... Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	2011-12-04 12:40:18 +01:00
Bernhard	dfd240b260	overworked autotemp, removed one layer of nesting from the ultralcd.	2011-12-04 09:48:53 +01:00
Bernhard	4f909963e4	make QUICKHOME configureable	2011-12-04 09:02:09 +01:00
Erik van der Zalm	6b86f15686	More 2nd extruder implementation. (Not usable) ... Advance (not tested)	2011-12-02 17:45:05 +01:00
Bernhard	0bc9daa4f7	make it compile with arduino 1.0 ; function is still untested.	2011-12-01 16:38:01 +01:00
Bernhard	b0c3871750	more fixing of the sanguino math round problem	2011-11-30 09:07:56 +01:00
Bernhard	9c57453168	removed stream.h referenece from marlinserial.	2011-11-30 08:57:30 +01:00
Bernhard	59205ac5fc	preliminiary implementation for the early heating finish. ... Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed. its kind of not so cool, because you need 6 more ints. Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways. Then it would be much easier. to have the offsets without additional variables.	2011-11-30 08:51:46 +01:00
Bernhard	7a4be21b4f	made it compile if arduino decides to include files in a differnt order. DEC HEX and stuff now defined in MarlinSerial.h	2011-11-30 08:32:28 +01:00
Bernhard	716e89b87c	first homing move diagonal towards home switches.	2011-11-29 22:11:45 +01:00
Bernhard	d00b7e5587	repaired compiliation in windows	2011-11-28 22:45:40 +01:00
Bernhard	e4ab0e5982	more inlines	2011-11-28 22:11:17 +01:00
Bernhard	8cb29921a0	possible stepper release after sd printing	2011-11-28 22:09:17 +01:00
Bernhard	044886b4a0	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	2011-11-28 21:52:16 +01:00
Bernhard	b19c8b74b9	force inline	2011-11-28 21:51:44 +01:00
Erik van der Zalm	6d95644c0d	Moved M88 into M84. (M84 E)	2011-11-28 21:49:54 +01:00
Bernhard	311627141b	Merge branch 'smallopt' into Marlin_v1 ... Conflicts: Marlin/temperature.h	2011-11-28 21:36:01 +01:00
Erik van der Zalm	7216a12856	Disabled M88 for boards that don't have seperate enable pins.	2011-11-28 21:17:06 +01:00
Erik van der Zalm	98805c9228	Added M88 command. (Request from Action68)	2011-11-28 20:51:01 +01:00
Bernhard	85da81e673	inlineing of small functions in serial	2011-11-28 19:34:42 +01:00
Bernhard	b9ad0bb2ce	removed unecessary indirect register adressing in serial.	2011-11-28 19:28:38 +01:00
Bernhard	dd5ca68c87	get rid of indirect ringbuffer calls, made some inlines, removed virtual and streaming class requirements.	2011-11-28 19:13:40 +01:00
Erik van der Zalm	dd5296ad4d	Fixed temperature reading bug. ... (When using the lower and upper adc input bank)	2011-11-28 17:42:49 +01:00
Erik van der Zalm	f75f426dfa	Removed interrupt nesting in the stepper ISR. ... Add serial checkRx in stepper ISR. Copied HardwareSerial to MarlinSerial (Needed for checkRx).	2011-11-27 21:12:55 +01:00
Bernhard	2d9a715655	first naive attempt to have a offset in the homeing procedure. Does not enable to move into regions not allowed by endstops.	2011-11-27 17:27:17 +01:00
Bernhard	d2f034ba84	lcd message from gcode, m117	2011-11-27 16:53:11 +01:00
Bernhard	6aecf80278	add autotemp support to the lcd	2011-11-27 16:45:19 +01:00
Bernhard	b128d25f27	overlooked some inlines..	2011-11-27 16:45:00 +01:00
Bernhard	26a1de1e44	force inline	2011-11-27 16:04:58 +01:00
Bernhard	f8e170a44b	planner optimization by inline functions	2011-11-27 14:57:12 +01:00
Erik van der Zalm	aad4b75b94	First parts 2nd extruder	2011-11-26 17:33:25 +01:00
Bernhard	a0dc66f7bf	Home retract distance configureable per axis.	2011-11-26 12:04:06 +01:00
Bernhard	6d6f323535	make an option if sd-card stop should release the steppers.	2011-11-26 11:51:38 +01:00
Bernhard	4d6a5c29df	disable steppers as routine in stepper.cpp	2011-11-26 11:50:23 +01:00
Bernhard	74d0032e25	cooldown blocking selectable by #define.	2011-11-26 09:03:12 +01:00
Bernhard	191f36b493	slowdown	2011-11-25 23:59:30 +01:00
Bernhard	c54a807824	overworked ultralcd a bit	2011-11-25 23:37:08 +01:00
Bernhard	a6823a84e1	another typo	2011-11-25 22:36:33 +01:00
Bernhard	57e163e989	typo	2011-11-25 22:34:12 +01:00
Bernhard	b58787a367	now velocities are also set in mm/sec in gcode.	2011-11-25 22:32:26 +01:00
Bernhard	71ca78982b	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	2011-11-25 22:14:36 +01:00
Bernhard	235051253a	overworked lcd+eeprom to have only mm/sec and PID including pid_dt	2011-11-25 22:14:29 +01:00
Erik van der Zalm	27654bfe69	Fixed variable (removed 0x)	2011-11-25 22:10:06 +01:00
Erik van der Zalm	cdf0bd4e63	Fixed config bug when EEPROM was disabled	2011-11-25 20:07:30 +01:00
Erik van der Zalm	6ac9b2e761	Fixed residency time bug. (Thanks to Sound :-) )	2011-11-25 19:34:36 +01:00
Erik van der Zalm	ac8adabb2b	Small nominal speed improvement.	2011-11-25 15:32:50 +01:00
Erik van der Zalm	0e0e4945d8	Removed ISR overtaken message from ISR routine	2011-11-25 13:59:58 +01:00
Erik van der Zalm	c0f8c9fd72	Seperate ENDSTOP_INVERTING for X Y and Z ... Added simple endstop filter. Corrected M114 count display.	2011-11-25 13:43:06 +01:00
Bernhard Kubicek	5535e51bf6	Yes, thats the beta.	2011-11-20 17:04:57 +01:00
Bernhard Kubicek	8b14a8ad34	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	2011-11-20 16:39:39 +01:00
Bernhard Kubicek	924bab1a03	less lcd flickering	2011-11-20 16:37:01 +01:00
Bernhard Kubicek	379ea642e1	make tuneing sub-menu.	2011-11-20 16:05:42 +01:00
Erik van der Zalm	959d82e81e	Small temperature disable bug.	2011-11-20 15:03:35 +01:00
Erik van der Zalm	15bb3f284e	Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1	2011-11-20 14:51:40 +01:00
Erik van der Zalm	4e5becfc51	Added endstop reporting	2011-11-20 14:50:08 +01:00
Bernhard Kubicek	eeb4f029db	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	2011-11-20 14:45:38 +01:00
Bernhard Kubicek	b21d5193f2	made ultralcd compatible with folders.	2011-11-20 14:43:47 +01:00
Erik van der Zalm	2e43f9c809	Changed min max temperature code.	2011-11-20 13:14:58 +01:00
Bernhard Kubicek	cd2268f10a	code cleanup in ultralcd.	2011-11-20 11:55:33 +01:00
Erik van der Zalm	0e7fee9a9b	Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1	2011-11-19 21:33:15 +01:00
Erik van der Zalm	915ef2d4a1	Added software endstops	2011-11-19 21:32:47 +01:00
Bernhard Kubicek	e87df99e22	update mcode documentation	2011-11-19 21:01:07 +01:00
Bernhard Kubicek	8a1e719a3f	overworked config file	2011-11-19 20:52:43 +01:00
Bernhard Kubicek	5ad1d19384	make it compile without sd_support	2011-11-19 20:18:54 +01:00
Bernhard Kubicek	7a2d1f5aeb	add M17, so the enable stepper button works in repg.	2011-11-19 18:22:22 +01:00
Erik van der Zalm	e02af3e66a	Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1	2011-11-19 17:23:47 +01:00
Erik van der Zalm	537b5c155d	Fixed arc flowrate.	2011-11-19 17:23:28 +01:00
Bernhard Kubicek	953d830bba	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	2011-11-19 17:09:43 +01:00
Bernhard Kubicek	2a6afee832	make it compile without autotemp	2011-11-19 17:09:33 +01:00
Bernhard Kubicek	f52e1a9571	autotemp working, default=disabled.	2011-11-19 17:07:44 +01:00
Erik van der Zalm	6e6fdb9a4e	Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1	2011-11-19 16:18:13 +01:00
Erik van der Zalm	6841a10446	Fixed max/min temperature bug	2011-11-19 16:16:26 +01:00
Bernhard Kubicek	8a08b8e07e	trying to get autotemp to work.	2011-11-19 15:37:10 +01:00
Bernhard Kubicek	f0154de5b3	found bug that disabled printing from root.	2011-11-19 15:36:49 +01:00
Bernhard Kubicek	70650c331d	corrected the ultimaker default values, the previous had a calculation error: see: http://groups.google.com/group/ultimaker/browse_thread/thread/91906788639703cf	2011-11-19 14:50:31 +01:00
Bernhard Kubicek	9d90220537	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	2011-11-19 14:35:53 +01:00
Bernhard Kubicek	869cee74e6	host-based sd card printing seems now to work with folders	2011-11-19 14:34:27 +01:00
Bernhard Kubicek	70abca195a	overworked cardreader for folder support; not finished yet.	2011-11-19 13:13:34 +01:00
Erik van der Zalm	ff69e0a772	Changed max/min temp init. Removed second uart from sabguino core	2011-11-19 12:19:53 +01:00
Bernhard Kubicek	1e5e141ac9	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	2011-11-18 22:22:23 +01:00
Bernhard Kubicek	edb5ea7efa	the normal config again..	2011-11-18 22:22:07 +01:00
Bernhard Kubicek	5df5727e93	removed some debugging comments	2011-11-18 22:20:53 +01:00
Bernhard Kubicek	64f2121ab1	updated to sdfatlib2010902	2011-11-18 22:17:37 +01:00
Erik van der Zalm	b15902d3b5	Fixed bug in configuration.h	2011-11-18 19:46:16 +01:00
Erik van der Zalm	e63e224a33	Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1 ... Conflicts: Marlin/Configuration.h Marlin/Marlin.pde	2011-11-18 19:04:09 +01:00
Erik van der Zalm	e7dca8614b	Advance experiments. Not working yet.	2011-11-18 18:59:17 +01:00
Bernhard Kubicek	46f80e82d9	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 ... Conflicts: Marlin/ultralcd.h	2011-11-15 22:53:04 +01:00
Bernhard Kubicek	a9c7da06e3	and changed ultipanel to have the mm/sec and not mm/min ... Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 Conflicts: Marlin/Marlin.pde Marlin/ultralcd.h	2011-11-15 22:50:43 +01:00
Bernhard Kubicek	02b9eceead	show sd%	2011-11-15 20:55:00 +01:00
Bernhard Kubicek	7919a40d06	watchdog,percent done,	2011-11-15 20:54:40 +01:00
Erik van der Zalm	805d37f77b	Fixed some small planner bugs	2011-11-15 18:14:00 +01:00
Erik van der Zalm	5fd41ae872	Some fixes in planner	2011-11-14 23:57:34 +01:00
Erik van der Zalm	95126c09c0	Added slowdown	2011-11-14 20:04:29 +01:00
Erik van der Zalm	331e82dcd3	Buffer size > 16	2011-11-14 18:53:09 +01:00
Erik van der Zalm	2643ae93d6	Added modified Sanguino files	2011-11-14 18:27:47 +01:00
Erik van der Zalm	c00eefb824	Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1	2011-11-14 18:26:57 +01:00
Erik van der Zalm	1d0452f10c	250000 baud	2011-11-14 18:24:02 +01:00
Bernhard Kubicek	c57906b627	fixed bug with adjusting ki in realtime.	2011-11-13 21:43:26 +01:00
Erik van der Zalm	ac82411c73	Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1	2011-11-13 20:46:44 +01:00
Erik van der Zalm	65934eee9c	A lot of changes in the planner code	2011-11-13 20:42:08 +01:00
Bernhard Kubicek	9980ceb4a3	added a m400, that finished all moves, ... and the mechanism so that if an endstop is hit it the ISR, the steps_to_be_taken are stored, and some current_block data that will be deleted in the next move If the normal loop() then finds such an event, the position is calculated (floats would have taken too long in the ISR) A serial message is generated.	2011-11-13 19:58:09 +01:00
Bernhard Kubicek	ff592b056a	heater power repair.	2011-11-13 00:48:55 +01:00
Bernhard Kubicek	e9adfa27b5	re-enabled heaterpower as storage for the current storage of the heater PWM duty cycle. ... the M301 now returns the current PID settings of the machine. M105 returns heating pwm duty cylce as "@:"	2011-11-12 20:37:28 +01:00
Bernhard Kubicek	36958ee305	minor changes and first not-well working version of autotemp	2011-11-09 22:09:16 +01:00
Bernhard Kubicek	ba8a53a40f	Streaming.h is gone. It conflicted with PROGMEM. And saving memory is more important than nicer code, imho	2011-11-09 20:30:41 +01:00
Bernhard Kubicek	27361e7cd0	beautified the config. ordered it into thematic sections.	2011-11-09 20:28:40 +01:00
Bernhard Kubicek	ab154d5592	project progmem finished: total change with ultipanel: 2456 byte free ram initial. now: 4374 ram.	2011-11-09 20:27:44 +01:00
Bernhard Kubicek	7b70caab7c	made progmem mainly, found one bug in cardreader, added a empty class for cardreader in case no sd support.	2011-11-07 22:33:13 +01:00
Bernhard Kubicek	72ace55e6a	better visibility of public/private/imported variables	2011-11-06 23:34:40 +01:00
Bernhard Kubicek	977fd2b2c7	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	2011-11-06 23:21:33 +01:00
Bernhard Kubicek	907daa49af	made loop counters uint8_t most were int(16_t) before	2011-11-06 23:21:12 +01:00
Erik van der Zalm	e3af73ee0c	Thermistor name problem	2011-11-06 23:20:01 +01:00
Bernhard Kubicek	0b43761c3a	preprocessor magic to have a single source principle	2011-11-06 23:13:19 +01:00
Bernhard Kubicek	156763d027	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	2011-11-06 22:48:36 +01:00
Bernhard Kubicek	fc0064e525	made cardreader more selfsustained	2011-11-06 22:48:15 +01:00
Erik van der Zalm	d3bfffcb6e	Corrected thermistor naming	2011-11-06 22:37:43 +01:00
Bernhard Kubicek	01df04e02c	first compile with the cardreader class	2011-11-06 21:39:53 +01:00
Bernhard Kubicek	163efdf1c7	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	2011-11-06 19:49:04 +01:00
Bernhard Kubicek	87aaf0f70a	static'ified Marlin.pde.	2011-11-06 19:48:37 +01:00
Erik van der Zalm	5cf349a24a	Fixed some arc bugs	2011-11-06 19:37:12 +01:00
Bernhard Kubicek	79d1bfb5c0	made many possible variables static, so they cannot be used extern.	2011-11-06 19:36:29 +01:00
Erik van der Zalm	76b3f805c0	Added teensylu pins	2011-11-06 19:30:04 +01:00
Bernhard Kubicek	1d171e9e52	reformating and some minor bugs/things found on the way.	2011-11-06 19:23:08 +01:00
Bernhard Kubicek	900e0c9bf2	overworked the serial responses. Quite difficult, since many texts are Pronterface protocol.	2011-11-06 17:33:09 +01:00
Bernhard Kubicek	1740a83e11	correcting commit errors.	2011-11-06 15:10:29 +01:00
Bernhard Kubicek	7cc358b56b	wrong file location	2011-11-06 14:58:12 +01:00
Bernhard Kubicek	e8092898b1	watchdog into dedicated file	2011-11-06 14:22:15 +01:00
Bernhard Kubicek	2afb7bd4cf	refactured temperature.cpp so that there are now abstract functions to access temperatures.	2011-11-06 14:03:41 +01:00
Erik van der Zalm	0b82465168	First arcs version. (Arcs not working ok)	2011-11-06 12:39:00 +01:00
Erik van der Zalm	2e8e8878e5	Corrected temp variables.	2011-11-05 20:21:09 +01:00
Erik van der Zalm	04d3b5537f	Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1 ... Conflicts: Marlin/Configuration.h Marlin/EEPROMwrite.h Marlin/Marlin.h Marlin/Marlin.pde Marlin/temperature.cpp Marlin/temperature.h Marlin/thermistortables.h	2011-11-05 20:03:38 +01:00
Erik van der Zalm	d15f01e1b4	Temperature changes	2011-11-05 19:21:36 +01:00
Bernhard Kubicek	ea86a5e10f	moved the variables in the ISR, thats the most normal use case of static.	2011-11-05 16:53:37 +01:00
Bernhard Kubicek	b9ea0651ec	Revert "this is not working. Do you maybe know why?" ... This reverts commit 8bcdb9f5f0.	2011-11-05 16:49:29 +01:00
Bernhard Kubicek	8bcdb9f5f0	this is not working. Do you maybe know why?	2011-11-05 16:43:44 +01:00
Bernhard Kubicek	40e8081623	changed end of line to windows, which seems to be the majority of developers main platform.	2011-11-05 14:19:57 +01:00
Bernhard Kubicek	00674af3a8	merge from the branch bkubicek/Marlin/zalmmerge	2011-11-05 14:13:20 +01:00
Erik van der Zalm	d7c4f0780b	Added M42, M80 and M81	2011-11-05 11:18:52 +01:00
Erik van der Zalm	95d3d9847c	M109 now equal to sprinter	2011-11-04 23:38:25 +01:00
Erik van der Zalm	bf879ceaa9	Added thermistor tables	2011-11-04 22:51:14 +01:00
Erik van der Zalm	094afe7c10	Merged Marlin, Marlin non gen6 and Ultimaker changes	2011-11-04 18:02:56 +01:00
Erik van der Zalm	0b1423c303	Fixed crashes.	2011-10-18 19:13:30 +02:00
Erik van der Zalm	27664c6da6	Software endstps added	2011-09-15 17:37:58 +02:00
Erik van der Zalm	8e017b81ab	Sync with non-gen6 version	2011-09-14 18:56:45 +02:00
Erik van der Zalm	b5f6482dce	Fixed small feedrate bug. ... Copied Camiels comments in the Configuration.h file	2011-08-21 18:29:47 +02:00
Erik van der Zalm	0024a26ccf	Fixed lookup table bug.	2011-08-15 19:26:40 +02:00
Erik van der Zalm	5a1787b2f4	Fix M109	2011-08-14 22:15:33 +02:00
Erik van der Zalm	26bf57e22c	first-commit	2011-08-13 10:09:54 +02:00
Erik van der Zalm	f850af5c1c	Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>	2011-08-12 22:31:59 +02:00
Erik van der Zalm	750f6c33e3	first commit	2011-08-12 22:28:35 +02:00