3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,390 Commits 3 Branches 78 Tags 40 MiB
fdff5d84b2
Commit Graph

1207 Commits

Author SHA1 Message Date
DRracer
b95d7365c8
Merge branch 'MK3' into remove-unnecessary-delay 2020-03-26 18:45:34 +01:00
DRracer
c085ecaa11
Merge pull request #2264 from leptun/MK3_fix_selftest_Z_crash2 
PFW-1048: fix selftest Z crash. Use stallGuard when testing Z
 2020-03-26 18:22:35 +01:00
Alex Voinea
d0c51b9e73
int -> bool 2020-03-26 19:06:35 +02:00
DRracer
65228a046e
Merge pull request #2520 from MRprusa3d/PFW-x001bPR 
FS PCB auto-detect
 2020-03-26 17:36:18 +01:00
D.R.racer
818efb4fa2 updated messages + slight refactoring to save some bytes 2020-03-26 15:07:48 +01:00
D.R.racer
34ac2917ae fix. warning "Macro expansion producing 'defined' has undefined 
behavior"
update screen layout comments
 2020-03-26 14:40:47 +01:00
MRprusa3d
ff479afd88 version for testing / final review 2020-03-10 15:51:48 +01:00
Alex Voinea
5fcf18718f
Decouple XYZ relative from E relative. 2020-03-05 11:22:35 +02:00
MRprusa3d
0eaa4edfee configuration update 2020-03-02 21:18:11 +01:00
MRprusa3d
2a9504b20a !!! for testing only !!! 
filament sensor auto-detection
 2020-03-02 19:07:23 +01:00
MRprusa3d
ec5e54de25 state fixing 2020-03-02 17:52:25 +01:00
vintagepc
e06beb61c3 Ditch charswitch, show ... for measuring 2020-02-21 18:14:13 -05:00
vintagepc
1aaefffdb0 Change to raise_z_above() 2020-02-13 07:37:27 -05:00
vintagepc
5abee3d3e5 Better display handling 2020-02-11 19:44:26 -05:00
vintagepc
278bb032d7 Change to raise_z_above() 2020-02-11 18:37:26 -05:00
vintagepc
a4458fb57b Removed duplicate #defines 
cleaned up display routine
 2020-02-11 18:33:40 -05:00
vintagepc
e4b1a1e9c4
Remove delay for belttest, similar to #2439 
There's a separate PR to remove the first delay in the selftest. (#2439). Mirroring that to the belt test function, which I suspect also inherited it.
 2020-02-09 21:39:48 -05:00
vintagepc
721b27fcb6
Reorg/cleanup 
Removed unused progress variable
reorganized flow to avoid early returns (ensures forced high power mode is disabled regardless of outcome)
 2020-02-08 12:33:23 -05:00
vintagepc
1384e783bf
Force high power mode when running belt test 2020-02-07 16:14:33 -05:00
Yuri D'Elia
6fbd632c84 Isolate all PAT9125-specific code, fix build on !MK3 variants 
- Hide all prototypes related to PAT9125 to force all callers
  to check for the proper sensor, since the handling differences
  are substantial
- Remove unneeded lenght accounting from the stepper isr as as
  consequence.
- Keep detailed soft failure counts for the MK3 on the "last print
  failures" status screen, but fix build on variants without a PAT9125
  by fixing the lcd stats function.
 2020-02-05 16:20:12 +01:00
Yuri D'Elia
8fb8ff4bf4 Include fsensor recovery stats in the last print stats 2020-02-05 16:20:12 +01:00
Alex Voinea
3ae5fa70ca
Fix comments 2020-02-03 19:20:43 +02:00
Alex Voinea
1f482adf55
Improved lcd_menu_statistics() implementation 2020-02-03 18:40:46 +02:00
DRracer
d6522a643c
Update ultralcd.cpp 
indent
 2020-01-31 16:57:18 +01:00
DRracer
fd42361236
Update ultralcd.cpp 
do delay(2000) everytime, even if IR_SENSOR_ANALOG
 2020-01-31 16:55:40 +01:00
DRracer
10d468cceb
Merge branch 'MK3' into remove-unnecessary-delay 2020-01-31 16:51:27 +01:00
DRracer
3e70b73a1f Remove unnecessary delay in lcd_selftest, which occured there as a result of merge. 2020-01-27 19:02:15 +01:00
Alex Voinea
2e50954710
Merge branch 'MK3' into MK3_fix_selftest_Z_crash2 2020-01-22 14:56:54 +02:00
MRprusa3d
73527d6069 selfTest workflow optimalization 2020-01-22 04:45:13 +01:00
odaki
24b748c4ac Merge remote-tracking branch 'upstream/MK3' into flashair_display_ip 2020-01-16 21:25:55 +09:00
DRracer
7230b99448
Merge pull request #2393 from wavexx/sync_before_resume 
Sync before resume
 2020-01-15 12:49:56 +01:00
DRracer
1a8420f3f9
Merge pull request #2383 from wavexx/fix_usb_resume_check 
Fix fan_check_error check in usb print resume
 2020-01-15 12:48:48 +01:00
DRracer
43870c4028
Merge pull request #2368 from wavexx/unretract_after_lcd_pause 
Unretract when resuming a paused print
 2020-01-15 12:47:24 +01:00
Alex Voinea
32c9cd2307
Merge branch 'MK3' into fix_lcd_stop 2020-01-09 14:17:56 +02:00
DRracer
b088500eaf
Merge pull request #1909 from wavexx/MK3_LA15 
Linear Advance 1.5 Returns
 2020-01-09 11:22:06 +01:00
DRracer
df300a2488
Merge pull request #2403 from leptun/MK3_unknown_Z_mark 
Show ? near Z value if the position is unknown
 2020-01-08 14:55:37 +01:00
DRracer
e15d5e21f5
Merge pull request #2402 from leptun/MK3_sheet_on_status_screen 
Do not show sheet on status screen if less than 2 are initialized
 2020-01-08 14:42:29 +01:00
DRracer
2f2e415eae
Merge pull request #2382 from wavexx/fix_lcd_stop 
Fix lcd "Stop" when used within a pause
 2020-01-08 14:40:54 +01:00
Alex Voinea
8b0f0695a8
Merge branch 'MK3_fix_shorter_sheet_name_on_status_screen' into MK3_sheet_on_status_screen 2020-01-08 15:31:33 +02:00
Alex Voinea
9abdf4e535
Show ? near Z value if the position is unknown 2020-01-08 13:46:51 +02:00
Alex Voinea
c5324291ad
Do not show sheet on status screen if less than 2 are initialized 2020-01-08 12:48:41 +02:00
Alex Voinea
d9e5283526
Fix pause->stop->PrintFromSD scenario 2020-01-07 21:02:13 +02:00
Alex Voinea
1996fc7940
Remove commented-out code 2020-01-07 20:43:56 +02:00
Alex Voinea
4422fc29f8
Set XYZ to absolute and E to relative 2020-01-07 20:42:21 +02:00
Alex Voinea
f8a0d5d773
Fix lcd_print_stop function 2020-01-07 19:54:06 +02:00
Alex Voinea
df0d781c20
Merge branch 'MK3' into fix_lcd_stop 2020-01-07 19:53:55 +02:00
odaki
f923427dc1 Show the FlashAir IP address 
Displays the FlashAir IP address in the "Support" menu if the card is available.
If no IP address has been assigned yet, "0.0.0.0" will be displayed.
 2020-01-04 12:51:20 +09:00
Yuri D'Elia
57be14fca6 Complete all pending moves before restoring a saved print 2019-12-30 13:30:06 +01:00
Yuri D'Elia
a31319888c Fix fan_check_error check in usb print resume 
Also check for fan_check_error == EFCE_OK in addition to EFCE_FIXED.

Reorganize the check in order to fix both #if[n]def FANCHECK cases,
as similarly done in the SDSUPPORT case a few lines below.
 2019-12-23 19:12:46 +01:00
Yuri D'Elia
8d60e4d6db Merge remote-tracking branch 'upstream/MK3' into MK3_LA15 2019-12-18 18:28:41 +01:00
Alex Voinea
f071aec747
Fix sheet minimum width on the status screen 2019-12-18 08:52:25 +03:00
Yuri D'Elia
8d490f941a Make use of the CRITICAL_SECTION macros in lcd_print_stop 2019-12-16 16:39:20 +01:00
Yuri D'Elia
0cc68228f8 Unretract when resuming a paused print 2019-12-16 16:33:11 +01:00
DRracer
955c88cf68
Merge pull request #2370 from wavexx/no_resume_while_resuming 
Do not allow to resume a print twice while waiting for the hotend
 2019-12-16 16:26:02 +01:00
Yuri D'Elia
faa76df2fe Fix the "Stop print" behavior from the LCD 
Correctly cleanup the printer state when stopping the current print:

- Disable interrupts while aborting the planner/queue to ensure
  new serial commands are not inserted while aborting
- _Always_ call planner_abort_hard() to interrupt any pending move!
- Clear the saved_target, which might be set when calling stop
  from within a paused state. Create a new function to clear the
  paused state for future use.
- Do not disable/reset the MBL: doing so will destroy the ability to
  restart correctly using M999.
 2019-12-16 15:52:37 +01:00
Yuri D'Elia
348bbbffb0 Do not allow to resume a print twice while waiting for the hotend 
Clear isPrintPaused just prior to restore_print_from_ram_and_continue.
 2019-12-15 22:22:44 +01:00
DRracer
c122399020
Merge pull request #2270 from leptun/MK3-PFW-1024 
PFW-1024
 2019-12-15 10:25:37 +01:00
DRracer
d68d9c7fef
Merge pull request #2058 from leptun/MK3_fix_warnings 
Fix "LANG_MODE 0" warnings
 2019-12-15 09:29:27 +01:00
Alex Voinea
770fcd7c42
Merge branch 'MK3' into MK3-PFW-1024 2019-12-14 10:08:52 +02:00
DRracer
30cee7afca
Merge pull request #2353 from wavexx/lcd_pause_fixes 
Fix the LCD pause (regression)
 2019-12-13 13:53:29 +01:00
DRracer
a1bc4cc5dc
Merge pull request #2332 from leptun/MK3_Octoprint_fIxes 
Do not check for fanError if it is not enabled on resume
 2019-12-13 13:47:56 +01:00
Yuri D'Elia
0b9123ce24 Fix Live K, allow "Advance K" to be translated 2019-12-05 15:18:24 +01:00
Yuri D'Elia
5122f79a39 Merge remote-tracking branch 'upstream/MK3' into MK3_LA15 2019-12-04 17:27:23 +01:00
Yuri D'Elia
063d0421ac Call long_pause from the main loop (again) 
After calling stop_and_save_print_to_ram, perform the parking moves
within the main loop as done before PR#1899 to avoid planning within
an interrupted move (which would clear the abort flag too soon).
 2019-12-03 20:37:13 +01:00
Alex Voinea
a413cfbb9a
Merge branch 'MK3' into MK3-PFW-1024 2019-11-29 13:07:45 +02:00
Yuri D'Elia
dbe2ed4150 Fix pause/resume when using M25/M601 
Remove the conflicting and mostly useless card.paused flag (the printing
is either paused, or not) and switch to isPrintPaused only which
accounts for both cases (SD/USB) correctly.

Fix M27/getStatus to show the current real status of the SD print.

Synchronize the queue on M601, as required to precisely pause the print
at the correct instruction.

Alias M25 to M601, which when combined with PR #1899 fixes issue #1614.

Guard against incorrect usage in M601, M602 and M603.
 2019-11-28 17:37:58 +01:00
Alex Voinea
45b89c5728 Fix typo 2019-11-19 13:55:37 +02:00
Alex Voinea
e66574ac5f Updated branch to use TOGGLE 2019-11-19 13:51:10 +02:00
MRprusa3d
6e2793566c
Merge branch 'MK3' into PFW-943 2019-11-18 14:43:46 +01:00
Alex Voinea
b077303156 Fix compile error 2019-11-17 11:10:13 +02:00
Alex Voinea
14104e7bf9 Clear error flag when fanError is disabled 2019-11-17 10:44:11 +02:00
Alex Voinea
2e0034d915 Update Toggles and Translations 2019-11-17 09:53:14 +02:00
Alex Voinea
359c447127 Do not check for fanError if it is not enabled on resume 
Fix typos
 2019-11-16 22:44:34 +02:00
Alex Voinea
07b6173aaa Merge branch 'MK3' into MK3-PFW-1024 2019-11-16 11:28:29 +02:00
DRracer
e2e32b455a
Merge pull request #2247 from mkbel/reset_live_Z+offset 
Show current Z offset in reset dialog before first layer calibration
 2019-11-15 17:52:29 +01:00
DRracer
460f6c3b5e
update message 2019-11-15 17:47:39 +01:00
DRracer
715794d854
Merge pull request #2092 from leptun/MK3_Translations 
PFW-1062: Mk3 Toggle and Translations
 2019-11-15 16:53:17 +01:00
DRracer
3a41405f52
Merge pull request #2146 from vintagepc/MK3-2093-sheet-display 
PFW-1061: #2093 - Relocate sheet menu, show sheet on info screen
 2019-11-15 16:07:51 +01:00
vintagepc
f6c35c5d5f
Removed separate fix for #2089 
Per PR fix request
 2019-11-15 08:58:58 -05:00
DRracer
8fae50ec79
Merge pull request #2315 from mkbel/finda 
PFW-1047: Show FINDA state as N/A if last received response is older than 1s.
 2019-11-15 12:53:01 +01:00
DRracer
56251c4f99
Merge pull request #1937 from arons/MK3 
added new function belt test under calibration menu
 2019-11-15 09:39:42 +01:00
DRracer
9e780f0b2b
remove ESC sequence 2019-11-15 09:26:56 +01:00
Alex Voinea
11428388c6 MBL toggle and cleanup 2019-11-09 20:58:56 +02:00
Alex Voinea
20a59f5f40 Temp cal. 2019-11-08 19:44:48 +02:00
DRracer
c82fa07299
Merge pull request #2195 from leptun/MK3-fix-LFN 
Fix short filenames scrolling in sdprint menu and status screen
 2019-11-08 16:52:53 +01:00
DRracer
ce5efb107a
Merge pull request #2155 from leptun/MK3_SD_scroll_workaround 
SD Scroll workaround
 2019-11-08 16:48:38 +01:00
DRracer
b33c79e6c7
Merge pull request #1899 from wavexx/fix_lcd_pause_function 
Fix the LCD pause function
 2019-11-08 14:55:13 +01:00
DRracer
42d70f3dea
Merge pull request #1768 from wavexx/unknown_z_improvements 
"Unknown z" improvements
 2019-11-08 14:52:56 +01:00
Alex Voinea
1de353dd09 Merge branch 'MK3' into MK3_Translations 2019-11-07 17:02:45 +02:00
DRracer
3c26f7855b
Merge pull request #1704 from leptun/MK3_Enable_fan_waiting_cooldown 
Enable print fan while waiting for cooldown
 2019-11-04 16:52:26 +01:00
leptun
cd5ff783cf General fixes and improvements to code 2019-10-31 19:07:20 +02:00
Marek Bel
76c39ce689 Show FINDA state as N/A if last received response is older than 1s. 2019-10-31 17:45:22 +01:00
leptun
1e09f8c003 Wake on certain events 
EEPROM DIM and BRIGHT values swapped!!!
 2019-10-30 21:11:19 +02:00
Yuri D'Elia
50231b76da Improved handling of unknown Z position 
- Introduce raise_z_above to move Z carefully when the current position
  is potentially unknown, using stallguard
- Use raise_z_above for:
  * filament loading/unloading clearance
  * extruder spacing when preheating (to avoid buildplate marks on PEI)
  * before homing to avoid damaging the build plate and to avoid
    repeated Z moves as well

Since raise_z_above is conditional, it will only raise when needed.

Calling raise_z_above when the extruder position is unknown and already
at maximum travel is safe and will prevent further vertical moves.
 2019-10-22 15:49:10 +02:00
DRracer
d32fd1d893 Better EN for new messages 2019-10-22 09:11:47 +02:00
leptun
d7b12faa95 Add "Brightness" to Tune menu 2019-10-19 18:45:04 +03:00
leptun
0ed4a23ae7 And another compile fix... 2019-10-18 12:42:55 +03:00
leptun
9fc42526e7 Backlight always on during calibration 2019-10-18 12:18:43 +03:00
leptun
91e94aa0e8 Adjustable timeout 2019-10-18 10:32:41 +03:00
leptun
812eafd09c Fix compile for miniRambo 2019-10-17 13:14:32 +03:00
leptun
25e0d23efe Backlight overhaul and UI changes 2019-10-17 13:11:32 +03:00
DRracer
04bfe674df tiny lang fixes, part 1 2019-10-16 16:32:49 +02:00
leptun
3b005ae38f Backlight detection 2019-10-16 14:40:45 +03:00
leptun
5a662413e6 Fix compile for printer without backlight support 2019-10-13 14:34:04 +03:00
leptun
75f389a71d Auto-Dimming initial 2019-10-13 14:31:43 +03:00
leptun
4703853a3d Small fixes 2019-10-12 13:19:17 +03:00
leptun
350e27810a fix selftest Z crash. Use stallGuard when testing Z 2019-10-11 21:00:51 +03:00
leptun
b2a1dc6786 Compile fix for firmware without LCD_BL_PIN 2019-10-11 19:23:38 +03:00
leptun
68491c9d4d First implementation 2019-10-11 19:06:37 +03:00
Marek Běl
05e23d1468
Merge branch 'MK3' into MM_lay1_cal 2019-10-01 23:08:11 +02:00
DRracer
ff7260dc6e
Merge pull request #2246 from mkbel/reset_live_Z 
Reset live z
 2019-10-01 23:02:40 +02:00
Marek Bel
74a1c9341b Revert "Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset." 
This reverts commit ca9ef3aba1.
 2019-10-01 22:57:59 +02:00
Marek Bel
ca9ef3aba1 Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset. 2019-10-01 22:57:15 +02:00
Marek Běl
210d7f6bf1
Merge pull request #2245 from DRracer/knob-long-press 
Knob long press fixes
 2019-10-01 22:33:26 +02:00
Marek Bel
087d3cb250 Continue to lcd_v2_calibration() after selection is made in lcd_first_layer_calibration_reset(). Do not ask for selection if sheet is not calibrated, it is calibrated to zero offset or no first layer calibration was ever made. 2019-10-01 21:04:00 +02:00
Marek Bel
aabf7655dc Do all text formatting in first layer calibration reset dialog in one line. 2019-10-01 19:20:36 +02:00
Marek Bel
7c3f397a62 Print sheet name and Z offset in first layer calibration reset dialog. 2019-10-01 18:22:12 +02:00
leptun
b39f09b68e Merge branch 'MK3' into MM_lay1_cal 2019-10-01 19:20:50 +03:00
DRracer
d044d3b7b5
Merge pull request #2244 from MRprusa3d/PFW-1008 
EEPROM_BABYSTEP_Z using removal
 2019-10-01 18:04:09 +02:00
DRracer
f3c3526aa5 fix the knob long-press causing hang in modal dialogs 2019-10-01 17:13:36 +02:00
MRprusa3d
ed13788e0c EEPROM_BABYSTEP_Z using removal 2019-10-01 16:57:37 +02:00
DRracer
9ae75612b5 Fixes after first feature tests 2019-10-01 15:31:01 +02:00
DRracer
06187f52f3
Merge pull request #2230 from leptun/MK3_Octoprint_fIxes 
Mk3 Fan error fix
 2019-10-01 11:34:55 +02:00
DRracer
72aed3c544 Allow knob-long-press only in listed menus 2019-10-01 10:51:02 +02:00
Marek Bel
543ad6eb41 Ask to reset Z offset before first layer calibration. 2019-09-30 19:58:09 +02:00
leptun
9d57f9c365 Fix fan_error_selftest() mistake 2019-09-30 20:30:09 +03:00
leptun
61c7479579 Code cleanup: Move texts to messages.c/h 2019-09-30 20:16:01 +03:00
leptun
30f325c81d Extract fan_error_selftest to function for readability 2019-09-30 20:01:31 +03:00
Marek Bel
aba9d1c360 Merge branch 'MK3' into MM_lay1_cal 2019-09-30 18:13:57 +02:00
leptun
dfd3f34351 Check for minimum fan speed. Should be achievable by both fans in 1s. 2019-09-25 22:35:35 +03:00
leptun
532d1fc4ae Fix "Resume Print" missing when doing a normal pause 2019-09-25 18:32:35 +03:00
leptun
c3b7b5ebb5 Check fans before resuming 2019-09-25 15:58:07 +03:00
leptun
3c17f7e145 No need to check the fan in the menu 2019-09-22 14:04:58 +03:00
leptun
2363f19a62 Minor tweaks for usb printing 2019-09-20 21:07:20 +03:00
DRracer
139c37c744 allow only one string translation constraint defintion per line 2019-09-20 13:01:07 +02:00
leptun
fd01942db8 FAN Error fix - Initial 2019-09-19 20:48:59 +03:00
D.R.racer
2afeb65811 return failStatsFmt that fell out in merge 2019-09-19 18:39:25 +02:00
D.R.racer
f50cef8361 Merge remote-tracking branch 'upstream/MK3' into translations-doc 
and resolve ultralcd.cpp conflicts
 2019-09-19 18:10:20 +02:00
Marek Běl
68359687f8
Merge pull request #2202 from DRracer/lang-381-fixes 
dialogs' layouts fixes + FR polished
 2019-09-19 16:33:26 +02:00
D.R.racer
17cca89993 Merge remote-tracking branch 'upstream/MK3' into translations-doc 2019-09-18 15:17:28 +02:00
DRracer
e7273ea505 Fix [French translation] Wrong display during mesh bed calibration #2218 
minor code/doc improvements
 2019-09-18 12:49:44 +02:00
DRracer
c1bf4a6288
Merge pull request #2216 from michalrudolf/MK3-miniopravy 
Mk3 miniopravy
 2019-09-18 11:34:17 +02:00
Marek Bel
027b6238fd Mark code unused when PINDA_THERMISTOR is defined by macro. Saves 1B of RAM and 4B of FLASH memory. 2019-09-17 20:26:03 +02:00
Marek Bel
966d9baf2b Document. 2019-09-17 19:00:03 +02:00
michalrudolf
b660cb3908
ultralcd.cpp 2019-09-17 11:46:29 +02:00
D.R.racer
77c4720c8b Merge remote-tracking branch 'upstream/MK3' into translations-doc 2019-09-17 11:32:27 +02:00
michalrudolf
b4e0c2f455
Update ultralcd.cpp 
Menu Support -> XYZ calibration details -> 3. obrazovka "point offset"
X value is no longer moved to the left if there’s no negative sign
 2019-09-17 10:51:43 +02:00
Marek Bel
c66b4bd876 Do not ask for preheat temperature twice if calibrating first layer from wizard without filament. 2019-09-16 21:14:17 +02:00
Marek Bel
e1cfd6dc4f Remove option to heat nozzle only from mFilamentItem() when activated from wizard, as it has no use after filament unload was removed from wizard. 2019-09-16 18:48:52 +02:00
Marek Bel
ff4450489b Document. 2019-09-16 18:38:44 +02:00
Marek Bel
002a7d31a4 Make lcd_wizard() more debug friendly. 2019-09-16 18:31:12 +02:00
Marek Bel
b99038736c Use eeprom_update_byte instead of eeprom_write_byte 2019-09-16 18:22:34 +02:00
MRprusa3d
d491a9801d
Update ultralcd.cpp 2019-09-16 16:04:45 +02:00
MRprusa3d
0e1d559f03
Merge branch 'MK3' into PFW-943 2019-09-16 15:29:28 +02:00
MRprusa3d
011468598e IR sensor gen. II 
disconnected PCB detection
 2019-09-16 00:43:37 +02:00
Marek Bel
015b34de05 Alert user in wizard about more sheets presets. 2019-09-13 17:09:11 +02:00
DRracer
4423106fad dialogs' layouts fixes (support menu dlgs, statistics etc.) 
French translation polished
 2019-09-13 16:55:05 +02:00
Marek Bel
e754780717 Fix condition for returning to wizard. eFilamentAction == FilamentAction::Preheat was never true as eFilamentAction is set to eFilamentAction::None in lcd_return_to_status(). 2019-09-13 00:19:37 +02:00
Marek Bel
f1d190d2d5 Do not ask same filament related question twice if starting first layer calibration from wizard. 2019-09-12 23:41:42 +02:00
Marek Bel
ebf405d589 Preselect "yes" for filament question in first layer calibration wizard. 2019-09-12 23:20:03 +02:00
Marek Bel
d256c18635 Fix first layer calibration wizard. Do not jump to WizState::LoadFil if calibration is supposed to be performed. 2019-09-12 23:17:19 +02:00
Marek Bel
73642632f5 Do not force PLA filament in first layer calibration from wizard. Remove duplicate variable wizard_active. Saves 410 B of FLASH and 1 B of RAM. 2019-09-12 22:37:28 +02:00
Marek Bel
07a0f527d8 Reset lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P() also when it times out. 2019-09-12 20:30:27 +02:00
Marek Bel
6630591f9e Consume lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P(). 
This fixes problem encountered in lcd_v2_calibration(). Selected menu item skips to another if returning to menu after this message is used.
 2019-09-12 20:20:33 +02:00
Marek Bel
d48197656c Fix lcd_v2_calibration menu not redrawn after full screen message or question. 2019-09-12 20:05:16 +02:00
Marek Bel
770e470fd5 Extract common code to function preheat_or_continue(). Saves 138B of FLASH memory. 2019-09-12 18:53:24 +02:00
Marek Bel
d80b8280a0 Remove commented out and unused functions prototypes. 2019-09-12 18:41:17 +02:00
Marek Bel
3a541488b2 Rename extr_unload_() to mmu_unload_filament() and move it to ultralcd.cpp as it is menu. 2019-09-12 18:40:02 +02:00
Marek Bel
0cdfa7a5e8 Remove dead code. 2019-09-12 18:33:02 +02:00
Marek Bel
e83b2ebe1f Rename mFilamentMenu to lcd_generic_preheat_menu to match naming convention for global function and be more descriptive. 2019-09-12 18:15:15 +02:00
Marek Bel
c26d7e50f7 Remove redundant lcd_update_enable(true) call. 2019-09-12 18:07:46 +02:00
Marek Bel
6674cbf0d7 Select material / temperature before first layer calibration. 2019-09-12 17:54:05 +02:00
leptun
ae839aee31 Merge branch 'MK3' into MK3_Translations 2019-09-12 16:28:36 +03:00
Marek Bel
6661d3aa45 Merge remote-tracking branch 'prusa3d/MK3' into MM_lay1_cal 2019-09-12 14:28:52 +02:00
DRracer
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu 
Unify preheat menu, add ASA material
 2019-09-12 14:25:38 +02:00
Marek Bel
43705aae2e Rename lay1cal_preheat() to lay1cal_wait_preheat(). 2019-09-12 00:19:20 +02:00
Marek Bel
ae3e6530e6 Do not ask for PLA filament in the beginning of first layer calibration. Do not ask if filament is present if it can be detected by IR sensor. 2019-09-12 00:14:24 +02:00
leptun
bf9f668574 Fix short filenames scrolling in sdprint menu and status screen 2019-09-11 22:04:48 +03:00
DRracer
60de313b8a
Merge pull request #1759 from wavexx/enhanced_longpress 
Default to "Live Adjust Z" when longpressing during a print (closes #1604)
 2019-09-10 14:13:00 +02:00
3d-gussner
d51b3d6207 Added doxygen todos for missing LCD layout and positioning 2019-09-01 09:51:51 +02:00
vintagepc
339771a5fb Fixed info screen when selected_sheet hasn't been initialized. 2019-08-31 21:27:08 -04:00
leptun
10cdcb3ae3 SD Scroll workaround 2019-08-31 17:00:39 +03:00
leptun
795b1d1cf7 Toggle Sound 2019-08-31 16:56:14 +03:00
Yuri D'Elia
2345288d40 Fix the LCD pause function 
Do not call long_pause recursively!

long_pause() is called before resetting the lcd_command_type. As
long_pause uses st_synchronize() internally, there could be time to
schedule another call to long_pause().
 2019-08-31 15:28:31 +02:00
leptun
3c4fffef60 Merge branch 'MK3' into MK3_Translations 2019-08-31 15:30:51 +03:00
leptun
a5a5f5cf0b Toggle RPi port 
Probably works, needs to be tested.
 2019-08-31 15:25:00 +03:00
leptun
f69035323a Toggle SD Settings 
This includes FlashAir support and SD Sorting type
 2019-08-31 14:55:51 +03:00
leptun
a821002f02 Toggle MMU Mode 2019-08-31 07:38:40 +03:00
vintagepc
d347a36509 Merge branch 'MK3' of https://github.com/prusa3d/Prusa-Firmware into MK3-2093-sheet-display 2019-08-30 19:17:27 -04:00
vintagepc
871e29621f Fix "stuck" rename cursor 2019-08-30 19:14:22 -04:00
Marek Běl
a789a8995f
Merge pull request #2145 from mkbel/fix_sheet_reset 
Fix sheet reset
 2019-08-30 16:49:34 +02:00
leptun
6a8330a43b Toggle "HW Setup"* 
All toggles from "HW Setup" were changed.
This includes:
-"Nozzle d."
-all "Checks"
Also added an option to provide a string from sram (not from progmem) as the toggle argument. This can be useful when toggling numbers or even when toggling sheets in the future.
 2019-08-30 17:36:21 +03:00
Marek Bel
3d292350d4 Do not activate selected_sheet in lcd_v2_calibration() as this leads to calibrating random sheet if activated from calibration menu. 
selected_sheet is initialized to 0 and contains index of last Sheet menu visited.
 2019-08-30 14:45:25 +02:00
Marek Bel
26423f98bc Switch to next sheet if currently selected sheet is not initialized. Move next_initialized_sheet() and change_sheet_from_menu() to eeprom.cpp, rename it to eeprom_next_initialized_sheet() and eeprom_switch_to_next_sheet(). Rename default_sheet_name() to eeprom_default_sheet_name(). 2019-08-30 12:24:13 +02:00
leptun
b86a92a7d6 Toggle Mode (stepper power) 2019-08-30 07:59:58 +03:00
vintagepc
8df6691819 Relocate sheet menu, show sheet on info screen 
-Sheet is shown instead of percentage done either if idle, or during
print preheat.
-Relocated sheet menu to below SD menu for additional visibility to
current sheet.
 2019-08-29 18:07:24 -04:00
leptun
db6e2e0525 Toggle Crash det. 2019-08-29 22:31:30 +03:00
Marek Bel
8c8619be05 Convert reset sheet sub menu to function. 2019-08-29 20:52:53 +02:00
Marek Bel
abf84e36f5 Fix sheet menu back caption to Steel sheets to match parent menu caption. 2019-08-29 20:23:02 +02:00
Marek Bel
d647cdc02c Convert sheet switcher from sub menu to function. Handle null characters in sheet name. 2019-08-29 20:13:10 +02:00