BitmapComboBox: Use virtual OnSelect() on wxEVT_COMBO event
Don't save information about preset combobox type to the evt.SetInt(). This information can be received from BitmapComboBox::get_type() now.
Reworked skirt generator to only generate skirt at non-empty layers
(layers that actually extruder object or support) and to respect minimum
layer height. Skirt generator stops at the first layer where those both
conditions cannot be met.
Disabled a suspicious piece of legacy code inherited from Slic3r,
which tries to fill in spots inside support interfaces. The code was
too aggressive and it was doing more harm than good.
New config field for switching the support interface pattern between
default (rectilinear for non-soluble interface, concentric for soluble interface),
explicit rectilinear and explicit concentric.
Also the config layer was reworked a bit to reduce some switch statements
on ConfigOptionEnum<> templates.
Fixes [Request] Add optional perimeter to raft #756
Fixes First support layer does not stick to bed #2101
New parameters raft_first_layer_density and raft_first_layer_expansion
to influence the 1st layer of raft or support.
Fixes Allow to disable raft under support structures. #3772
Fixes raft is larger than necessary #2568
Fixes Supports on the build plate should have a solid bottom interface for better adhesion #1165
Changed the 1st layer infill to rectilinear even for soluble materials.
Fixes first layer of support for multi filament support oddly spaced #1445
Fixes Full Soluble Materials interfacing into Models + Soluble material noise on Bed #684
When an island contains exactly one infill ExtrusionEntity, this extrusion was oriented to maximize travel distance from the end of the previous extrusion of perimeters instead of minimizing it.
Fixes Brim destroyed by support aka. Enable supports on top of brim #1156
Fixes Brim Priority/Support on Brim #713
Fixes Phantom Support columns interfere with brim #3396
Fixes false generation of brim when supports are used #3395
This is a work in progress, as the brim generator currently produces
different brim areas from what the support generator expects.
When projecting the horizontal or nearly horizontal support enforcers or blockers
into object layers, the projection may fall on a layer above or below the layer
where it should in case the nearly horizontal support enforcer or blocker
triangles are intersecting the slicing plane of one of the object layers.
Due to numerical issues, projection of the support blocker or
enforcer triangles may not fall to the same side of the slicing plane
as when slicing the object. To make the projection robust, horizontal triangles
are newly projected to both the layer below and above if they are close
to the object slicing plane.
1. DoubleSlider::Control : Update extruder colors before another updates for layers slider
2. GCodeViewer : Control count of extruders during the legend updating
The projection algorithm was originally made for custom supports, so vertical triangles
were not interesting. They are for seam. Instead of rewriting the algorithm and risking
more bugs, the edge case is detected and the triangle is tilted slightly.
Projection into a grid has been reworked to use the AGG rasterizer.
This fixes#5209 and #6067.
Also the raster is now being oversampled by maximum 8x8 samples
and the supports are only allowed to expand inside the cell.
This significantly reduces leakage of supports through object walls,
which fixes#5054.
When the avoid crossing perimeters was enabled, and the wipe was enabled, there were unnecessary travels in the opposite direction than the wipe travel.
under soluble supports. #5823
Implemented as a pull request #5903 by @spiky2021
and reworked.
commit c7993e619225553a2c4078787907b9ebbd9ac759
Author: spiky2021 <77010315+spiky2021@users.noreply.github.com>
Date: Thu Feb 11 12:39:25 2021 +0100
Base type interfaces for soluble interface supports
At the moment soluble support material adhesion is weak due to sparse support layers under soluble support layers. I reported as issue #5823 with pictures, as well.
I modified two methods to the SupportMaterial Class including their headers.
The new methods add two base type interface layers to the support structure, in case the extruders are different and soluble support is choosen.
Since it is conditionally activated, it in general doesn't need a GUI input. But a GUI option number of base interface layers may enabled users to adapt this feature to their needs.
This is my second try to provide a pull request on this topic. Reset my fromer repository, because first I merged this and all other changes to my master and couldn't provide separate pull request anymore.
ModelObject::split() expects a non-NULL new_objects vector where it adds pointers to the new models resulting from the split.
But in the CLI case the caller does not care about this and passes NULL which causes a crash. To fix the crash we could pass
a dummy vector but it turns out that we actually have a use for the results because we should assign a unique name to each
new model the same way as the GUI does. These names show up as comments in the gcode so this change makes the gcode produced
by the GUI and the CLI more similar and diffable.
@lukasmatena has amended the original commit by @combolek (pull request #5991) in order to avoid code duplication
Description of issue:
When for some parameter set a value which is out of rage or inaccurate and than click to another parameter,
receive a warning message dialog with description of a problem.
After closing of this Dialog any button on settings tab doesn't work for first click.
Looks like after dialog is closed Notebook page loses a focus.
Workaround:
Use self-created WarningDialog (inherited from the wxDialog) instead of wxMessageDialog
Adjustment of GUI/3DBed.cpp,hpp to use the more stable triangulation algoritm
derived from SGI glut.
Fix of an extremely slow bridging calculation, caused by an extremely
slow bridged area detection function, of which the results were never used.
Fixes "slicing fails or takes too long #5974"
option "Use colors for axes values in Manipulation panel" is enabled in Preferences -> GUI
+ Fix one more compilation warning in UnsavedChangesDialog.cpp
- Extra dialog for autosetting by angle in FDM supports gizmo was removed
- Highlighting facets by angle is now controlled by a slider in the main gizmo dialog
- User is allowed to paint even when using the slope highlighter
- The button to turn highlighted facets to blockers was removed, it made no sense
- Highlighted facets are now rendered in light blue
When passing a PrintRegionConfig to the slicing back end, zero an infill
density if it is already nearly zero. This avoids an ugly division by
zero in the infill code and it also makes clear to the back end that
we don't want an infill.
Squashed commit of the following:
commit 4e13a8fe19abcc9aae39a9bc4c7953a743196504
Merge: 6ae766409 6f89da1f3
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date: Fri Feb 5 11:19:35 2021 +0100
Merge remote-tracking branch 'remotes/origin/master' into vb_edgegrid_open_lines
commit 6ae76640942269993c942861f0444088843e3fa1
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date: Fri Feb 5 11:14:48 2021 +0100
EdgeGrid enhancement to accept both the open and closed lines.
commit 36a5efcd558bd5fd5f46b5f561387a2c73221553
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date: Fri Feb 5 10:52:14 2021 +0100
EdgeGrid improvements: Documentation, one bug fix after recent refactoring.
commit 6f89da1f39
Author: tamasmeszaros <meszaros.q@gmail.com>
Date: Thu Feb 4 20:31:50 2021 +0100
Disable libicu for boost-regex
Should have been disabled from the beginning
commit ffc77b1a72a0be9b5622fd33defeebb24bf07b34
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date: Thu Feb 4 18:40:33 2021 +0100
EdgeGrid: Annotated those methods that do not work with open contours.
commit 8039a645b4bf0c46c99b90a9c34e7189d7442f86
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date: Thu Feb 4 18:28:21 2021 +0100
Refactoring of EdgeGrid structure to support both closed and open lines.
