3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,852 Commits 1 Branch 1 Tag 249 MiB
eeada56c1f
Commit Graph

1647 Commits

Author SHA1 Message Date
bubnikv
73a539780a Bumped up a version number. 2017-12-01 18:56:32 +01:00
bubnikv
ca0626b168 Fixed regression bugs regarding print validation, 
fixed crashes when loading a config.ini with "compatible_printers"
disabled export of "compatible_printers" into gcode and config.ini

Enabled compatibility of printing multiple objects with support / no support
with a wipe tower.
 2017-12-01 18:55:57 +01:00
bubnikv
354408c7e6 Load the wxWidgets PNG handler only once. 2017-11-30 20:25:59 +01:00
bubnikv
752d72f58d Increased fill rate of the support 1st layer from 50% to 70%. 2017-11-30 19:04:07 +01:00
bubnikv
cecaf6eabc Slight optimization of the filament_start_gcode insertion: 
It is not needed between the purging towers and the wipe tower brim.
 2017-11-30 17:55:39 +01:00
bubnikv
bff7065360 Fixed a bug in the support generator: There was half extrusion width 
gap created between the support and the support sheath.
Now the support sheath will overlap with the support base by 10%
of the extrusion width by default.
 2017-11-30 16:24:48 +01:00
bubnikv
3996535e5d Changed handling of filament_gcode_start and filament_gcode_end custom 
G-codes in case of single extruder multiple material setup:
At the start of the print, the filament_gcode_start is executed
for the active extruder only, and the filament_gcode_start /
filament_gcode_end are then executed at each tool change.

When the Prusa MM wipe tower is active, the tool changes are handled
a bit differently: M900 K0 is emited before the wipe tower extrusions start,
and the filament_gcode_start code is executed after the wipe tower extrusions
are done. This rule effectively disables the linear advance over the wipe tower.

Implements https://github.com/prusa3d/Slic3r/issues/568
 2017-11-30 16:01:47 +01:00
bubnikv
8807d288d7 Fixed a regression issue when starting Slic3r with non-existent datadir. 2017-11-30 15:51:51 +01:00
bubnikv
830da1f8e4 Fixed a regression bug of handling the obsolete config parameters, 
causing crashes.
 2017-11-30 13:43:02 +01:00
bubnikv
2f54bf5bca Fixed a random crash in the PlaceholderParser due to deallocating 
an undefined pointer.
 2017-11-29 20:38:19 +01:00
bubnikv
f754cb422b Bumped up the version number. 2017-11-29 19:34:24 +01:00
bubnikv
ae118519ab Fixed a 32bit build bug in the new PlaceholderParser macro processor. 2017-11-29 19:27:26 +01:00
bubnikv
08e81f2765 Bumped up the build version. 2017-11-29 10:52:54 +01:00
bubnikv
9ca63f16bc New PlaceholderParser variable for sequential prints: 
current_object_idx - zero based index of the object printed.
Implements feature request https://github.com/prusa3d/Slic3r/issues/578
 2017-11-28 15:30:05 +01:00
bubnikv
672194b475 Ported the between_objects_gcode custom G-code blocks, 
thanks @lordofhyphens, https://github.com/alexrj/Slic3r/pull/3275

Improved handling of custom G-code blocks: Slic3r will try to extract
the target extruder and bed temperatures from the custom G-code blocks.
 2017-11-28 15:19:57 +01:00
bubnikv
f58b217369 Implemented loading of a Slic3r Config Bundle as a Slic3r Config file. 2017-11-28 11:57:33 +01:00
bubnikv
3c0cd3cbc8 Improve error handling of loading Slic3r profiles. 2017-11-28 10:08:01 +01:00
bubnikv
bb2b180ecc Fixed G-code export of custom G-code sections to not add a newline 
if the custom G-code already ends with a newline.
 2017-11-26 21:23:18 +01:00
bubnikv
b54a15faa2 Fix of the new PlaceholderParser: Maintain whitespaces and new lines. 2017-11-26 20:43:31 +01:00
bubnikv
571d654e67 Placeholder parser - added a comment with a reference to a C grammar. 2017-11-26 11:52:44 +01:00
bubnikv
5c3ba79c6f PlaceholderParser - added an unary not operator. 2017-11-26 11:16:28 +01:00
bubnikv
2312fa845e Fixed compilation on GCC, changed to handle keywords correctly. 2017-11-26 10:54:54 +01:00
bubnikv
708f416c84 PlaceholderParser extended with {if}/{elsif}{else} blocks and 
+ - * / == != <> numeric expressions.
 2017-11-26 09:59:14 +01:00
bubnikv
9205c8aab4 Sketch of the PlaceholderParser if/elsif/else macro. 2017-11-17 18:46:03 +01:00
bubnikv
47f193fe2d The PlaceholderParser has been rewritten to use 
a real boost::spirit::qi parser, accessing the DynamicConfig repository
directly. This is a first step towards a full fledged expression
interpreter.
 2017-11-17 11:15:46 +01:00
bubnikv
200f176951 Fixed compilation on Linux / GTK 2017-11-10 18:50:14 +01:00
bubnikv
4628308415 Oh those compiler differences. 2017-11-10 17:42:30 +01:00
bubnikv
bfce6dba9b Integrated the "compatible printers" idea by @alexrj with Vojtech's twist: 
The incompatible presets are hidden in the tabs if show_incompatible_presets
is false. If show_incompatible_presets is true, there is a button to
show / hide the incompatible presets from the tab selector.
 2017-11-10 17:27:05 +01:00
bubnikv
b23b9ea1d2 Implemented volumetric flow rate hints, 
removed some C++11 conditioned compilation. Slic3r now requires C++11.
 2017-11-09 15:10:20 +01:00
bubnikv
9a0100d6de Initial definition of PresetHints C++ class and Perl binding, ported the cooling logic hints to C++. 
Removed Perl Flow::new_from_spacing bindings.
Some Fill C++11 beautification.
Fix of a support_material_1st_layer_flow, brim_flow and skirt_flow logic to use the extrusion_width if both first_layer_extrusion_width and support_material_extrusion_width are undefined.
Documented the extrusion width logic in the config tooltips, including the default values.
 2017-11-09 10:48:06 +01:00
bubnikv
5fb54ed1f3 Code beautification: PrintConfig tooltips were split to multiple lines. 2017-11-09 10:06:25 +01:00
bubnikv
e4614f301c ConfigBase with option template to do the type conversion 
of resolved ConfigOption.
 2017-11-09 10:05:37 +01:00
bubnikv
71b58e24a9 Fixed a regression bug in the "first layer extrusion width" G-code comment. 
https://github.com/prusa3d/Slic3r/issues/566
 2017-11-06 15:43:56 +01:00
bubnikv
e6ecb77d9a Fixed loading of configs and configs from g-codes. 2017-11-03 19:14:33 +01:00
bubnikv
b11d9708ed Updated Controller after the presets C++ port. 2017-11-02 21:51:06 +01:00
bubnikv
dd9e1aff70 When loading Slic3r.ini of older Slic3rs, remove the .ini suffix 
from the preset names.
This fixes https://github.com/prusa3d/Slic3r/issues/367
 2017-11-02 17:31:24 +01:00
bubnikv
ee84e1773d Fixed an incorrect comment separator in generated g-code. 2017-11-02 16:50:08 +01:00
bubnikv
4ab4a9afe8 Fighting with boost::filesystem::directory_iterator 2017-11-02 16:40:25 +01:00
bubnikv
7551006102 Another fix or Unices of the previous commit. 2017-11-02 16:35:46 +01:00
bubnikv
df5628422c Fixed serial port enumeration on non-Win32 systems. 2017-11-02 16:29:03 +01:00
bubnikv
e8b6d92d4d Looks like the reworked C++ preferences start to work again. 2017-11-02 16:21:34 +01:00
bubnikv
95c284c764 Next step of Perl to C++ configuration layer conversion. 2017-11-01 19:30:05 +01:00
bubnikv
d564fc95df Split Preset.cpp,hpp to Preset.cpp,hpp and PresetBundle.cpp,hpp 2017-10-30 18:41:50 +01:00
bubnikv
1fee3633a0 New C++ class AppConfig for maintaining the config.ini 
New helper function for generating a unified "generated by slic3r" header.
 2017-10-30 18:15:41 +01:00
bubnikv
835e5b71a8 Reduce UI flicker. 2017-10-28 00:18:02 +02:00
bubnikv
857b78ddca Fix of the previous commit: Slic3r::Config::new_from_defaults_keys 
has to be provided with a reference to array of strings.
 2017-10-27 22:49:59 +02:00
bubnikv
21633bc0ba throw std::invalid_argument instead of std::exception 2017-10-27 21:28:39 +02:00
bubnikv
2455aee97c Further reduction of Perl Config.pm methods. 2017-10-27 18:52:35 +02:00
bubnikv
3bc79e80d5 Fixed configuration & validate C++ ports. 2017-10-27 16:11:06 +02:00
bubnikv
5a99e694ce Another step towards the C++ presets. 2017-10-26 17:17:39 +02:00
bubnikv
ee645007f2 Another step towards C++ presets. 2017-10-25 12:53:31 +02:00
bubnikv
fe0bf6ebf3 Optimization of Perlglue ConfigBase__get 2017-10-18 14:26:38 +02:00
bubnikv
d9d6d996e9 Utility functions to pass wxWidgets pointers from Perl to C++ code. 
C++ var_dir / set_var_dir() interface to access the UI resources
from the C++ code.
 2017-10-17 20:00:15 +02:00
bubnikv
af51220f34 Fix of preceding commit. 2017-10-17 19:41:04 +02:00
bubnikv
b9d57483d8 perglue.cpp - use static_cast instead of dynamic_cast if possible, 
use switch instead of plenty of ifs,
export clone<DynamicPrintConfig> to Perl XS.
 2017-10-17 19:19:41 +02:00
bubnikv
746afbd790 Yet another compilation fix? 2017-10-17 18:49:07 +02:00
bubnikv
9a7d1bb566 Another compilation fix. 2017-10-17 18:41:54 +02:00
bubnikv
de2c6a2a3d exception what() method shall be noexcept. 2017-10-17 17:53:16 +02:00
bubnikv
67ce4d862b One more fix of the preceding commit. 2017-10-17 17:48:04 +02:00
bubnikv
38aca5047f Fix of the preceding commit for gcc & clang: 
Add a class name suffix to the s_cache static members
of the StaticPrintConfig derived classes.
 2017-10-17 17:37:03 +02:00
bubnikv
3731820c48 Optimization of the configuration layer: 
The values of StaticPrintConfig derived objects were searched by a name
walking through a huge chained if.
Now they are being mapped with a std::map.
Also initialization of StaticPrintConfig classes from their ConfigOptionDef
defaults is done by maintaining a single global definition of each
StaticPrintConfig derived class, and a new instance is initialized
from this static copy.

Also the ConfigOption instances are casted using static_cast
wherever possible, and their types are verified by a virtual type() method.
This approach avoids insiginificant performance penalty of a dynamic_cast.

Also the compare and clone methods were added to ConfigOption,
and the cloning & compare work on binary values, not by serialization.
 2017-10-17 16:01:18 +02:00
bubnikv
a91d7cb2f7 Redefined the ==, != operators of Point and BoundingBox classes 
to become members of their respective classes to avoid type clashes
through implicit casting operators of ConfigOption classes.
 2017-10-17 14:36:30 +02:00
bubnikv
a191fbbec8 Fix of a 3D print path preview for the wipe tower: Calculate 
the bounding boxes accurately.
 2017-10-04 13:50:04 +02:00
bubnikv
a830a3c161 Fixes the scene disappearing when there are no Prusa MM priming towers. 2017-10-03 14:15:00 +02:00
bubnikv
e719e48a84 Fixed a bug in the temperature handling of the Prusa Multi Material 
priming towers.
 2017-10-03 13:43:34 +02:00
bubnikv
eb0117b1c1 Fix of https://github.com/prusa3d/Slic3r/issues/492 
When a layer contained the support interface only, it was errorneously
printed with the support base material.
 2017-10-03 13:22:37 +02:00
bubnikv
9898024ce9 admesh: changed header_num_facets to uint32 2017-10-03 12:41:53 +02:00
bubnikv
1958673806 Fixed the cubic infill: The cubic infill was 30% flatter than it should 
have been.
 2017-10-03 11:29:13 +02:00
bubnikv
a52a04550e Big endian fix, thanks to @hyperair for hints and initial implementation. 2017-10-03 10:57:16 +02:00
bubnikv
84d4bf8fdb Load presets into the new C++ class. 2017-10-02 17:35:00 +02:00
bubnikv
b1e3b0cdf9 Further fixes of the previous commit. 2017-09-20 10:16:00 +02:00
bubnikv
8089631f10 Fix of the previous commit: Fix compilation on Linux. 2017-09-20 10:03:53 +02:00
bubnikv
473233019c Initial partial implementation of presets in C++. 2017-09-19 13:55:48 +02:00
bubnikv
b58756f38b A bit of refactoring and beautification. 2017-09-18 10:01:37 +02:00
bubnikv
e16f827223 Ported PrintConfigBase::_handle_legacy from Perl to C++, 
merged from upstream Slic3r, thanks to @alexrj.
 2017-09-18 09:56:48 +02:00
bubnikv
cd084a33c6 Fixed a regression bug, which was made during the porting of 
discover_horizontal_shells() fron Perl to C++, where
the already calculated bridge direction was being lost.

Improved constness of the debug methods
    void export_region_slices_to_svg(const char *path) const;
    void export_region_fill_surfaces_to_svg(const char *path) const;
 2017-09-14 13:15:32 +02:00
bubnikv
777dc8c48b Fixed a missing bbox.defined=true assignment. 2017-09-13 15:52:51 +02:00
bubnikv
e2a169b0e5 Changed the G-code protocol for cleaning up the priming towers 
for the multi material prints.
 2017-09-13 13:27:49 +02:00
bubnikv
83b5b9e660 Set a missing bbox.defined flag. 2017-09-13 10:28:02 +02:00
bubnikv
6b2b279889 Fix of "exponentional values generated as G1 F-1.95058e+006 causing problems" 
https://github.com/prusa3d/Slic3r/issues/463
 2017-09-12 18:20:06 +02:00
bubnikv
98408bbed0 Fixed a crash when slicing leads to no print. 
Fixed a bug in TriangleMesh::bounding_box().
 2017-09-12 16:48:44 +02:00
bubnikv
b08d6f1969 The last priming area is shortened and the excess wipe is moved 
into the wipe tower if there is enough space inside the wipe tower.
 2017-09-12 15:55:38 +02:00
bubnikv
100c8f60a5 Added GCode/PrintExtents.cpp,h 
Added a check for a collision between the multi material priming
regions with the rest of the print.
 2017-09-12 09:01:48 +02:00
bubnikv
748c1ab1de Merge branch 'master' of https://github.com/prusa3d/Slic3r 2017-09-11 09:58:54 +02:00
bubnikv
fd3b474a63 Merges https://github.com/prusa3d/Slic3r/pull/509 2017-09-11 09:58:41 +02:00
eyal0
d903af5373 Many warnings fixed (#510) 
Thanks
 2017-09-11 09:49:59 +02:00
bubnikv
836dd98113 CMake build system: Adding -fext-numeric-literals when compiling with gcc. 
This should fix https://github.com/prusa3d/Slic3r/issues/500
 2017-09-11 09:20:22 +02:00
bubnikv
93774087f1 Fixed typo from the previous commit. 2017-09-04 13:55:56 +02:00
bubnikv
2c5304a520 Implemented an initial priming line for a single-material print 
on a Prusa Multi-Material printer.
 2017-09-04 13:51:05 +02:00
bubnikv
29d9a1e810 Fixed a default locale on Windows for UTF normalization. 2017-09-04 10:34:51 +02:00
bubnikv
b35f5780dc Fixed compilation on OSX & LInux 2017-09-04 10:14:56 +02:00
bubnikv
b610866d77 Implemented priming of all the filaments of the Prusa Multi Material. 2017-09-01 17:30:18 +02:00
bubnikv
247070cd82 Fixed a regression bug of Slic3r::encode() / decode() 2017-08-30 14:57:13 +02:00
bubnikv
38e35cefc7 Removed the Perl Build.PL for the XS module. This has been replaced 
by the CMake based build system.
 2017-08-30 10:03:32 +02:00
bubnikv
4bd694e205 CMake build process: Fixed build on OSX: renamed XS to XS.bundle 2017-08-29 16:37:46 +02:00
bubnikv
6688d6c590 CMake build system: Link perl library on windows only. 2017-08-29 12:41:59 +02:00
bubnikv
c0a9c67632 CMake build system: Fix on older linux? 2017-08-28 23:17:24 +02:00
bubnikv
ff4e8d94c0 CMake build process: Workaround for an old CMake on Linux. 2017-08-28 23:11:43 +02:00
bubnikv
0cb491e135 CMake build process: 
Added the "test" target to execute the perl prove unit / integration tests.
Added a post-build step to copy the XS.dll & Slic3r/XS.pm to local-lib.
 2017-08-28 19:11:16 +02:00
bubnikv
48f826c2c5 Disabled a limit of the nozzle diameter 0.4mm for the Prusa Wipe Tower. 
Allowed scaling of the extrusion amount over the Prusa Wipe Tower
for layer heights over 0.2mm.
 2017-08-28 14:57:00 +02:00
bubnikv
61b89865ff Fixed a regression bug (bundling of multiple STLs into a single model). 2017-08-28 14:54:46 +02:00
Vojtech Bubnik
85ffbf1f57 Merged 2017-08-18 22:47:26 +02:00
Vojtech Bubnik
d0c43c99c3 CMake build system: Linux fixes 2017-08-18 22:45:24 +02:00
Vojtech Bubnik
9620596d59 CMake build system - fixes for OSX. Now a working XS.bundle is being generated. 2017-08-18 13:06:10 -07:00
bubnikv
ba1c0b0137 CMake build process - fixes of the previous check-ins to build 
cleanly on Windows & Linux. There is still a work on OSX:
The XS module has to be linked without perl.lib and with
the following parameters to produce a bundle: -bundle -undefined dynamic_lookup
 2017-08-18 21:09:53 +02:00
bubnikv
e2a685b8bb CMake build system: Fixes for OSX. 2017-08-18 16:59:36 +02:00
bubnikv
3dbc93c663 CMake: Aadd local-lib to PATH and PERL5LIB environment variables, 
so the locally installed modules (mainly the Alien::wxPerl) will be reached.
 2017-08-18 14:34:54 +02:00
bubnikv
cb1bc0aaf8 CMake build system, initial placeholder for slic3r C binary. 2017-08-18 13:32:35 +02:00
bubnikv
428b7d3f9d CMake: Added all header files to the particular libraries. 2017-08-18 12:41:01 +02:00
bubnikv
2a3d2fb8c1 CMake: Split the globs into separate libraries. 2017-08-18 11:39:24 +02:00
Vojtech Bubnik
952ca18bf9 Modified to compile on Ubuntu 2017-08-17 19:43:14 +02:00
bubnikv
94483202ec CMake build system: Always use the system libexpat on Linux. 2017-08-17 18:33:15 +02:00
bubnikv
c0f099c2cf CMake conversion, further steps: Now it compiles on Visual Studio 2013. 2017-08-17 18:27:51 +02:00
bubnikv
bb36e78428 Further CMake integration, split the xs CMakeFiles.txt to 
FindAlienWx.cmake and FindPerlEmbed.cmake for easier Perl integration.
 2017-08-17 13:30:46 +02:00
bubnikv
5673205d2e Initial implementation of a CMake build system for the Slic3r XS module. 
Based on https://github.com/CReimer/Slic3r/tree/makefile_pr
Big thanks to @CReimer for his huge effort.
 2017-08-16 19:05:08 +02:00
bubnikv
507f2ff45e Comprimed the previous pull request. 2017-08-14 12:56:09 +02:00
redPrint7
fdc7036fe3 Update WipeTowerPrusaMM.cpp (#464) 
Resolves compile error on Win XP / Win 7 with native toolchain MinGW32-w64 on perl 5.26 or Citrusperl 5.24.
 2017-08-14 12:54:19 +02:00
bubnikv
3b54b68b59 Merged new methods for handling menus with icons, 
merged "Use submenus for listing options in dropdown menu." #3905
thanks @alexrj
Adapted the "Use submenus" code to sort the menus in the same order
as they appear in the parameter tabs.
 2017-08-04 16:28:01 +02:00
bubnikv
8d5e5519f2 Fix of compilation on Windows 32bit: Include windows.h for the declaration 
of MultiByteToWideChar.
 2017-08-03 19:49:41 +02:00
bubnikv
1385018724 Unicode handling: 
Removed the Perl dependencies on Encode, Encode::Locale and Unicode::Normalize.
Added dependency on boost::locale.
Added encode_path, decode_path, normalize_utf8 functions to Slic3r.xs

Slic3r.xs has been made mostly utf8 safe by using the boost::nowide library,
thanks to @alexrj for the idea.

Simplified the encode_path / decode_path stuff:
wxWidgets are unicode already, so there is no need to decode_path() from it.
Perl / win32 interfacing is non-unicode, so decode_path() is executed
on ARGV just at the beginning of the perl scripts.
 2017-08-03 17:31:31 +02:00
bubnikv
31085fb1d7 Ported some ModelObject methods from Perl to C++. 
Added some utility functions to TriangleMesh, thanks to @alexrj
Some porting to C++ based on work by @alexrj.
 2017-08-02 16:05:18 +02:00
bubnikv
777023c7a8 Ported PrintObject::prepare_infill & combine_infill from Perl to C++. 2017-08-02 14:24:32 +02:00
bubnikv
71f99423c5 New feature: Bridging angle override through a bridge_angle config 
variable. When set to zero, the usual automatic bridge detection applies.
The bridging angle override may be set at the Infill->Advanced settings,
or through a modifier mesh.
 2017-07-31 16:23:52 +02:00
bubnikv
75c72bc59b Fix of "MM incorrect extruder temperature" 
https://github.com/prusa3d/Slic3r/issues/443

Change of the PlaceholderParser:
All vector configuration values stored into the PlaceholderParser
are expected to be addressed by the extruder ID, therefore
if a vector configuration value is addressed without an index,
a current extruder ID is used.

Also a small fix of fan handling: The fan speed is set to zero
at the start of the G-code if the cooling for the initial extruder
is disabled.
 2017-07-31 15:42:55 +02:00
bubnikv
7181f5d163 PrusaControl file format: Added multi-material support. 2017-07-28 15:48:49 +02:00
bubnikv
812a2c7cbd Further implementation of FillRectilinear3. 2017-07-28 15:47:59 +02:00
bubnikv
137aab9631 Fixed compilation on Linux 2017-07-27 13:21:48 +02:00
bubnikv
a6ea01a23f Moved some math macros (sqr, lerp, clamp) to libslic3r.h 
Added UNUSED macro to libslic3r.h, used it to reduce some compile warnings.

Split the Int128 class from Clipper library to a separate file,
extended Int128 with intrinsic types wherever possible for performance,
added new geometric predicates.

Added a draft of new FillRectilinear3, which should reduce overfill near the perimeters in the future.
 2017-07-27 10:39:43 +02:00
bubnikv
969e3f4a80 Fixed "Fill angle of any number other than an Integer does not work" 
https://github.com/prusa3d/Slic3r/issues/427
Also enabled floating point rotation angle for supports.
 2017-07-20 13:38:10 +02:00
bubnikv
6bb773d0dd Prusa MM Wipe Tower, Improvements of the 1st layer: 
Thiner priming line along the wipe tower,
relatively thick infill at the 1st layer to improve adhesion.
 2017-07-20 12:58:51 +02:00
bubnikv
aaefb76888 Fixed test cases after change of the "sane" extrusion widths. 
Changed the default perimeter / infill overlap to 25%.
 2017-07-20 11:03:54 +02:00
bubnikv
ac672d9dc5 Changed the default "sane" extrusion width parameters to 
1x nozzle_dmr for support and top infill,
and 1.125x nozzle_dmr for the rest.
This corresponds roughly to the default values tuned for the Prusa MK2
for normal prints.
 2017-07-19 16:06:29 +02:00
bubnikv
2f2c0ddc99 Refactored Fill / Flow for readability. 
Added an "overlap" member variable to fill classes in the preparation
for futher move of the "infill / perimeter" overlap to the Fill class.
Moved the orientation predicates from Fill to Geometry.
 2017-07-19 15:53:43 +02:00
bubnikv
9c1b1829cf PerimeterGenerator - a bit of refactoring for readability. 2017-07-19 15:42:49 +02:00
bubnikv
81823fe7df Reduced the content of Geometry.pm, removed unused Perl subroutines. 
Reduced the use Slic3r::Geometry and use Slic3r::Geometry::Clipper
clauses to only reference used subroutines.
 2017-07-19 10:45:39 +02:00
bubnikv
2c82a327dd Fix of "Wipe Tower ... only supported ... .4 nozzle" error when slicing 
a non .4mm nozzle single extruder (Stock MK2S) print
https://github.com/prusa3d/Slic3r/issues/426

The constraint for the "Wipe Tower" checkbox has been raised, so
one will get this error message only if the printer settings has more
than one extruder configured, as the wipe tower does not get generated
for a single extruder print.
 2017-07-17 09:07:18 +02:00
bubnikv
ed73f0b6ef Fix of "Modifier meshes don't work for speed modifications" 
https://github.com/prusa3d/Slic3r/issues/298
 2017-07-14 17:30:54 +02:00
bubnikv
40a882d01e Experimental feature, which may make the Clipper offsets run faster 
due to avoiding the 128bit multiply operations:
A filtered predicate is tried to calculate SlopesEqual()
to minimize the invocation of 128bit multiply operations.
 2017-07-13 15:52:19 +02:00
bubnikv
bd93d2f334 Fix of "Cooling fan problem Slic3r 1.35.5.16 " 
https://github.com/prusa3d/Slic3r/issues/418
This is a regression of the cooling buffer changes done for multi-material
(supporting different cooling settings for different filaments)
 2017-07-13 12:11:00 +02:00
bubnikv
c159165780 A bit of clean-up in GCode.cpp 2017-07-11 11:42:55 +02:00
bubnikv
c52c31a855 A bit of clean-up in FillRectilinear2.cpp 2017-07-11 11:42:21 +02:00
bubnikv
c7d16699a4 When setting an override extruder in the Object Settings dialog, 
don't apply this extruder to supports. This did not make sense
as the new "don't change tool (0)" extruder choice fits well for non-soluble
and the soluble supports should not be overriden as well.
 2017-07-11 11:41:23 +02:00
bubnikv
41f50b246c Inlined Surface::any_internal_contains / any_bottom_contains 2017-07-10 13:15:36 +02:00
bubnikv
7c1350d007 Fixed "Too much support generated for buildplate only supports" 
https://github.com/prusa3d/Slic3r/issues/359
 2017-07-07 18:06:41 +02:00
bubnikv
774c69e3c6 Fix of "Problem with larger brim overlapping " 
https://github.com/prusa3d/Slic3r/issues/373
 2017-07-07 16:40:23 +02:00
bubnikv
434f538919 Fix of soluble interface / non-soluble support: 
The non-soluble support with "don't care" extruder will preferably
be printed with a non-soluble extruder, if possible without a tool change.
 2017-07-07 13:22:00 +02:00
bubnikv
abcd746774 Fix of 
Overhang threshold not utilized after 1.34.1
https://github.com/prusa3d/Slic3r/issues/360

"Overhang threshold" and "Enforce support" don't work
https://github.com/prusa3d/Slic3r/issues/273
 2017-07-07 10:45:39 +02:00
bubnikv
e78839d2fc Fixed a regression after porting GCode generator to C++ 
Not lifting extruder after printing complete individual objects
https://github.com/prusa3d/Slic3r/issues/400
 2017-07-05 11:58:00 +02:00
bubnikv
0ad4e9d51f Refactored the cooling buffer: Removed ElapsedTime. 2017-06-30 20:01:32 +02:00
bubnikv
bf9027ff2d Fix of a cooling buffer over multiple extruders. 2017-06-30 19:07:14 +02:00
bubnikv
115deee252 FLT_MAX strikes again 2017-06-30 17:14:13 +02:00
bubnikv
1158ce41df Finalized implementation of a cooling buffer for multiple extruders 
with different settings.
 2017-06-30 17:05:58 +02:00
bubnikv
ab21a253e0 Hopefully finally fixed reordering of the multi-material parts. 2017-06-26 16:44:16 +02:00
bubnikv
8160db23cc Implementation of "XY size Compensation for first layer" 
https://github.com/prusa3d/Slic3r/issues/190
 2017-06-26 16:28:10 +02:00
bubnikv
32fa84c5a5 Fix of https://github.com/alexrj/Slic3r/issues/4043 , thanks to @lordofhyphens. 
Further refactoring of the cooling logic to collect per extruder data.
 2017-06-23 10:13:09 +02:00
bubnikv
39b9341359 Include the wipe tower print time into the cooling time. 
Further refactoring of Extruder class.
 2017-06-22 15:18:37 +02:00
bubnikv
0454cc95f9 Ported the cooling changes from @alexrj: Don't slow down the external 
perimeters if not necessary, don't take the bridging time into account
when slowing down the print.

Removed Extruder & GCodeWriter Perl bindings.
Improved Extruder for constness.
Refactored GCode::m_elapsed_time to struct ElapsedTime.
 2017-06-22 12:59:23 +02:00
bubnikv
c1146e298b Set the bed temperature based on the active extruder settings. 
https://github.com/prusa3d/Slic3r/issues/157
 2017-06-21 17:45:55 +02:00
bubnikv
f0325575c2 Slic3r has been modified to propagate the following filament specific 
values to GCode generator, one per active extruder:

bed_temperature
bridge_fan_speed
cooling
disable_fan_first_layers
fan_always_on
fan_below_layer_time
first_layer_bed_temperature
max_fan_speed
min_fan_speed
min_print_speed
slowdown_below_layer_time

Now it remains to extend Slic3r to correctly apply these values.
 2017-06-21 16:15:39 +02:00
bubnikv
0bd2bb1e8e Compilation issue on Linux & OSX 
https://github.com/prusa3d/Slic3r/issues/368
 2017-06-21 14:12:11 +02:00
bubnikv
b12e4689e8 Fix of changing the order of volumes of a multi-volume part: 
The 3D preview scene was not updated properly.
 2017-06-21 14:10:22 +02:00
bubnikv
7ca02bda0f Fix of a "split" function issue. 
1) Load a multi-part stl
2) Rotate it by 90 degrees
3) Split it.

Before this fix, the split object jumped away from the print bed.

This sound similar to
https://github.com/prusa3d/Slic3r/issues/309
 2017-06-19 14:26:19 +02:00
bubnikv
cb43f19a90 Fixed a variable layer height profile update issue. 
https://github.com/prusa3d/Slic3r/issues/358
 2017-06-15 20:15:53 +02:00
bubnikv
b724d789fd New feature: Splitting an object into a multi-part volume. 2017-06-15 15:38:15 +02:00
bubnikv
a1f6403463 Fix of a wipe tower - wipe tower shrinking by the amount of material 
wiped into the zig-zag pattern.
 2017-06-15 10:53:37 +02:00
bubnikv
b8369ab19a gcc and clang did not like throwing std::exceptions with a cstring arugment 2017-06-14 20:33:20 +02:00
bubnikv
2ac981e422 Improved error handling when importing configuration from a G-code. 2017-06-14 20:18:46 +02:00
bubnikv
f7334f58d3 Finalized the config import from a G-code. 2017-06-14 18:53:11 +02:00
bubnikv
93dce7a2d3 Ported config load / stored to C++, thanks @alexrj 
Implemented import of config values from the G-code.
 2017-06-14 17:51:14 +02:00
bubnikv
c61e098066 Integrated the not yet accepted boost::nowide library, thanks @alexrj. 2017-06-14 16:24:49 +02:00
bubnikv
c431bf5982 Fixed missing default_region_config values exported into the g-code. 2017-06-14 15:16:43 +02:00
bubnikv
8a2a9abbd4 Fix of "Raft and support dont work together" 
https://github.com/prusa3d/Slic3r/issues/314
There was an issue with raft & soluble support.
Also there was a bug, where the support was not generated correctly
after a change of the support Z gap.
 2017-06-13 19:29:15 +02:00
bubnikv
6cb7583756 Reverted the "set_and_wait_temperatures" configuration to match 
the behavior of the @alexrj slic3r.
 2017-06-13 13:46:04 +02:00
bubnikv
f7831240e1 Fixed compilation on OSX 2017-06-13 12:09:49 +02:00
bubnikv
a4992602ee Auto arrange: Do at least something if the objects do not fit the bed. 
Thans @alexr
https://github.com/prusa3d/Slic3r/issues/336
 2017-06-13 11:43:25 +02:00
bubnikv
5cae4cc614 Fix of https://github.com/prusa3d/Slic3r/issues/285 
Refactored Model.cpp/hpp to C++x11 loops,
simplified the mesh / bbox handling.
 2017-06-13 11:35:24 +02:00
bubnikv
21ddcb8487 Fix of a layer height test to allow / disable the wipe tower. 2017-06-12 14:33:33 +02:00
bubnikv
f408f08850 Disabled the new Slic3r version check until we have a server set up 
for the Slic3r Prusa Edition.

Hopefully a fix of https://github.com/prusa3d/Slic3r/issues/258
by moving the 2D thumbnail generation to the main thread and
forcing the simple 2D convex hull for even the small objects.
 2017-06-12 14:25:35 +02:00
bubnikv
881a5c531b Fix of the last commits: 
1) FLT_MAX replaced with limits,
2) apply_config is called by the test case harness to update layer height profile.
 2017-06-09 14:24:00 +02:00
bubnikv
958c6553e7 Hopefully a fix of 
"Layer editing does not trigger reslicing with Background Processing enabled"
https://github.com/prusa3d/Slic3r/issues/293
 2017-06-09 13:27:35 +02:00
bubnikv
2bbcd49278 Fix of a crash in pressure equlizer filter. 
https://github.com/prusa3d/Slic3r/issues/339
 2017-06-08 20:28:21 +02:00
bubnikv
dd41406a55 Fixed regression in invalidation of slicing steps. 2017-06-08 17:46:28 +02:00
bubnikv
89dcd3e8b1 Implemented raft support for the wipe tower 
https://github.com/prusa3d/Slic3r/issues/324

Implemented a correct layer height preview for the wipe tower layers,
if the wipe tower layer height is not constant due to the application
of raft.
 2017-06-08 16:58:29 +02:00
bubnikv
f9f0940297 Implemented rotation of the support structure. 2017-06-08 14:02:37 +02:00
bubnikv
a15e6127cf Relaxed the requirements on the layer height for the Wipe Tower to 
the span of 0.15mm to 0.35mm.
 2017-06-08 12:10:34 +02:00
bubnikv
8b5f7f0fb2 Limit the object movement to the vincinity of the print bed. 2017-06-08 11:02:29 +02:00
bubnikv
53d08d1883 New BoundingBox3 class. 2017-06-06 19:12:46 +02:00
bubnikv
baf27ff021 Fix of View menu not working https://github.com/prusa3d/Slic3r/issues/307 2017-06-06 13:39:50 +02:00
bubnikv
3e764ada0c For the wipe tower to work, verify that all objects are sliced 
with the same layer heights.
Also enforce layer synchronization for soluble supports.
 2017-06-06 11:40:35 +02:00
bubnikv
72f348658f Testing for the required parameter combinations before enabling the wipe tower. 
The wipe tower needs to be made more general in the future to overcome
these limitations.
 2017-06-06 10:36:14 +02:00
bubnikv
88c9ae6ca6 Fix of 
https://github.com/prusa3d/Slic3r/issues/315
a crash if the max_layer_height is left to a default value of zero.
 2017-06-05 12:02:26 +02:00
bubnikv
ad3be1a69e Implemented filament start / g-codes. 
https://github.com/prusa3d/Slic3r/issues/265
https://github.com/prusa3d/Slic3r/issues/319
Based on the implementation by @lordofhyphens
19eea19d91
 2017-06-05 11:30:57 +02:00
bubnikv
b5f38dd23f Fixed the "avoid crossing perimeters" bug introduced in Slic3r 1.34.1.24 
https://github.com/prusa3d/Slic3r/issues/311
https://github.com/prusa3d/Slic3r/issues/317
https://github.com/prusa3d/Slic3r/issues/323
 2017-06-02 13:33:19 +02:00
bubnikv
ef73bb404b Fixed compilation on gcc. 2017-06-01 16:43:21 +02:00
bubnikv
02592378e2 Improved "ensure vertical wall thickness" feature for multi material: 
If the "interface_shells" feature is disabled, the "ensure vertical wall thickness"
feature will not add full infill over internal shells.

Fixed some issues with delayed loading of 3d scenes.
 2017-06-01 16:31:29 +02:00
bubnikv
556f40bf00 Clean-up of print step invalidation. 2017-05-31 17:02:23 +02:00
bubnikv
c8b934f8d3 Yet more refactoring of Print / PrintObject in regard to 
C++11 loops, configuration and step invalidation.
 2017-05-31 12:55:59 +02:00
bubnikv
0a692cc497 Regression fix of percent config values serialization. 2017-05-30 21:29:43 +02:00
bubnikv
102329c54d Further refactoring, C++11 conversion and code simplification. 2017-05-30 20:09:34 +02:00
bubnikv
e1ca1a82fb Fixed a regression bug from the last commit. Some more code simplification 
and inlining.
 2017-05-30 18:33:17 +02:00
bubnikv
efb1fd2066 Fixed order of loading the configs into Print / PrintObjects 
and loading the 3d print path preview.
 2017-05-30 17:24:50 +02:00
bubnikv
41a4df0a38 Print, PrintObject: Invalidation of steps, when chained, will now return 
a correct invalidated / not invalidated flag.
Rewrote the step valid state from std::set to a fixed array for performance
reasons.
 2017-05-30 17:17:26 +02:00
bubnikv
e32632b9d9 Config.cpp/h - inlined short functions, converted loops to C++11, 
fixed some constness issues.
 2017-05-30 17:04:36 +02:00
bubnikv
2178180a19 Wipe tower: Wipe less than usual amount of material if the wipe 
is followed by the final sparse zig-zag tower section.
 2017-05-30 10:51:38 +02:00
bubnikv
0120f3ed92 Fix of the final purge over the wipe tower. 2017-05-30 09:25:34 +02:00
bubnikv
3d6c997012 fixed compilation on Windows 2017-05-25 22:54:42 +02:00
bubnikv
2f4ff6577a With single_extruder_multi_material enabled, 
don't append a tool selection (Txx) to the extruder temperature
settings (M104 and M109).
 2017-05-25 22:52:28 +02:00
bubnikv
e000b22578 Implemented wipe tower print path preview. 2017-05-25 22:27:53 +02:00
bubnikv
7d64c465c0 New config field extruder_color for preview of extruder assignment. 2017-05-24 15:20:20 +02:00
bubnikv
2713aa1772 When generating a g-code for a layer, collect layers of multiple objects 
with not exactly the same print_z, but support a slight deviation.
 2017-05-23 17:09:43 +02:00
bubnikv
ca590cb559 Refactored ToolOrdering to a class, 
layers with print_z closer than EPSILON are merged and printed together.
 2017-05-23 15:00:01 +02:00
bubnikv
aad9f61bad Wipe Tower: Fixed some ordering issue in the G-code writer. 2017-05-22 20:56:42 +02:00
bubnikv
c9c4105289 Fixed an excessive retract / derectract length 
with the new retract_before_wipe value set to nonzero.
 2017-05-22 18:16:35 +02:00
bubnikv
ff9d565ba7 Implemented UI for ordering volumes 
https://github.com/prusa3d/Slic3r/issues/277
 2017-05-20 22:02:04 +02:00
bubnikv
dfc4717308 Fixes for Multi Material ramming, increased separation of wipe lines. 2017-05-20 18:59:05 +02:00
bubnikv
a99b006b98 Implemented https://github.com/prusa3d/Slic3r/issues/199 
by merging the work by @lordofhyphens done on https://github.com/alexrj/Slic3r/issues/3268
 2017-05-20 15:29:25 +02:00
bubnikv
70db88dd90 Improved retract handling on bowden extruders: 
Separated deretract speed from a retract speed,
allowed a partial retract before wipe.
 2017-05-19 19:24:21 +02:00
bubnikv
8bd3dec331 Extrude brim of the wipe tower before any other objects. 2017-05-18 21:22:48 +02:00
bubnikv
11307eb350 typo in default ramming sequence. 2017-05-18 19:49:55 +02:00
bubnikv
c28e4cb0f7 Increased extruder driver current for ramming over the multi material 
wipe tower.
 2017-05-18 19:05:44 +02:00
bubnikv
81701b400c Prusa Multi Material: Improved path planning when jumping to the wipe tower. 2017-05-18 16:53:19 +02:00
bubnikv
e75d851bc4 Updated MANIFEST, 
fixed some compiler warnings.
 2017-05-17 20:06:33 +02:00
bubnikv
fdff937cb2 Fixed tool ordering for sequential prints. 2017-05-17 19:25:36 +02:00
bubnikv
34747b2015 Added ABS material to the Prusa Multi Material wipe tower. 2017-05-17 18:14:47 +02:00
bubnikv
66b619dfa4 Bugfix of tool ordering. 2017-05-17 17:21:55 +02:00
bubnikv
f27ec3f226 Prusa Multi Material wipe tower: Do an unretract before doing 
the wipe tower things.
 2017-05-17 16:59:56 +02:00
bubnikv
cb0a66b743 Initial implementation of a wipe tower preview UI. 2017-05-17 16:53:40 +02:00
bubnikv
7b6c9b3b3c Fixes of the Prusa Multi Material wipe tower. 2017-05-17 16:45:37 +02:00
bubnikv
4bc827d1da WipeTowerPrusaMM: Added some documentation, fixed minor issues. 2017-05-17 10:42:39 +02:00
bubnikv
7b152919a6 Changed handling of extruder temperatures 
for single_extruder_multi_material printers.
Fixed some compilation errors on OSX.
Disabled re-slicing on change of new G-code only parameters.
 2017-05-16 16:02:52 +02:00
bubnikv
21be680ac2 Fixes of G-code multi-tool ordering. 2017-05-16 15:30:03 +02:00
bubnikv
c22b6edeeb Initial integration of the Prusa MultiMatrial Wipe Tower. 2017-05-16 13:45:28 +02:00
bubnikv
74346efccb Fix of a multi-material g-code export. 2017-05-15 16:42:29 +02:00
bubnikv
60c65f6da7 Fixed crashes intruduced recently into G-code generator. 
Added a template sort_remove_duplicates.
 2017-05-15 11:32:59 +02:00
bubnikv
89e34ae1d6 Missing include for OSX. 2017-05-12 14:22:20 +02:00
bubnikv
ff0412b417 Support material - Fixed some compilation warnings, added new debbuging 
SVG file outputs.
 2017-05-12 11:18:32 +02:00
bubnikv
3b5f40710c Support Generator: Fixed initial indices in search caches. 
Changed the interface layer infill type to concentric for soluble supports.
 2017-05-12 11:14:25 +02:00
bubnikv
46e8259b99 Fixing some missing layers with support material. 2017-05-12 11:09:24 +02:00
bubnikv
805179b9da Wipe tower refactored to remove renundancies, 
added comments.
 2017-05-12 10:44:56 +02:00
bubnikv
b92aa20cef Include <strings.h> on linux. 2017-05-10 16:15:14 +02:00
bubnikv
146039f402 Added Prusa MultiMaterial Wipe Tower. Now it is time to integrate it 
into the G-code generator.
 2017-05-10 15:54:59 +02:00
bubnikv
2f57ee60d1 Improved G-code generator for multi-material prints 
to minimize tool switches.
 2017-05-10 11:25:57 +02:00
bubnikv
18bb3c3244 Added Notes Tab to Printer Settings #210 2017-05-05 11:59:51 +02:00
bubnikv
60528c5c2a Performance improvements of the MotionPlanner 
(rewrote the Dijkstra shortest path algorithm to use a binary priority
heap instead of a dumb O(n^2) algorithm, added some bounding box tests
to avoid expensive in-polygon tests if possible).
 2017-05-05 09:59:56 +02:00
bubnikv
0adc6cc65e Provide own implementation of std::make_unique for older compilers. 2017-05-03 18:57:33 +02:00
bubnikv
867619fa40 missing include <memory> 2017-05-03 18:35:55 +02:00
bubnikv
e90279c513 Ported the G-code generator from Perl to C++. 
Removed GCode.pm
Removed the Perl bindigns for AvoidCrossingPerimeters, OozePrevention, SpiralVase, Wipe
Changed the std::set of extruder IDs to vector of IDs.
Removed some MSVC compiler warnings, removed obnoxious compiler warnings when compiling the Perl bindings.
 2017-05-03 18:28:22 +02:00
bubnikv
72ae3585e4 Removed a broken Arc Fitting feature. 
Removed the questionable Pressure Advance feature. It is better to use the Pressure Advance implemented into a firmware.
Added a C++ implementation of GCodeReader and SpiralVase, thanks to @alexrj
Added a C++ implementation of GCodeTimeEstimator, thanks to @lordofhyphens
 2017-04-26 14:24:31 +02:00
bubnikv
69c0f55679 Fixes loading of multi-part ASCII STLs. 
https://github.com/prusa3d/Slic3r/issues/255
 2017-04-18 10:53:31 +02:00
bubnikv
23be6233c8 Finalized the experimental "synchronize support layers with object layers" 
feature (the support_material_synchronize_layers settings).
The feature is now enabled for the soluble supports only
(with support_material_contact_distance > 0).

Fixes https://github.com/prusa3d/Slic3r/issues/197
 2017-04-10 12:00:07 +02:00