3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,431 Commits 1 Branch 1 Tag 249 MiB
f494335f77
Commit Graph

1289 Commits

Author SHA1 Message Date
Alessandro Ranellucci
44016b38c5 Distribute skirt loops across all extruders 2012-10-24 19:13:40 +02:00
Alessandro Ranellucci
f0d2b0e5ea Avoid overlapping regions (thanks Mike Sheldrake!). #726 2012-10-24 16:46:40 +02:00
Alessandro Ranellucci
1c50c8a401 Merge branch 'dynamic-flow' 2012-10-24 16:19:13 +02:00
Alessandro Ranellucci
6beaf5e597 New faster algorithm for filling gaps, while we work on a new medial axis implementation 2012-10-24 16:17:09 +02:00
Alessandro Ranellucci
1445820673 External perimeter first on bottom layer when brim is enabled. #761 2012-10-24 12:04:44 +02:00
Alessandro Ranellucci
1627268fd4 Merge branch 'master' into avoid-crossing-perimeters 
Conflicts:
	lib/Slic3r/GCode.pm
 2012-10-24 11:49:31 +02:00
Alessandro Ranellucci
19e77a28a1 Merge branch 'master' into dynamic-flow 2012-10-24 10:55:57 +02:00
Alessandro Ranellucci
28b56ae840 Force unfocusing of all input fields when saving a preset, otherwise the currently focused one might be ignored. #750 #624 2012-10-22 16:03:08 +02:00
Alessandro Ranellucci
c793a2657f Replace Math::ConvexHull with Math::ConvexHull::MonotoneChain. #722 2012-10-22 15:29:54 +02:00
Alessandro Ranellucci
68c3a0dd61 Make arcs.t happy. #721 2012-10-22 14:08:27 +02:00
Alessandro Ranellucci
33b1970b95 Incomplete commit broke the plater on threaded perls 2012-10-22 14:02:58 +02:00
Alessandro Ranellucci
0990a9418c Bugfix: honeycomb infill was overlapping too much with perimeters. #732 2012-10-22 13:38:37 +02:00
Alessandro Ranellucci
3c7785aaf3 Useless extra perimeters were generated sometimes. #444 #732 2012-10-22 13:21:11 +02:00
Alessandro Ranellucci
76f75db055 Always specify tool number in M104/M109 when printing with multiple extruders 2012-10-21 21:44:06 +02:00
Alessandro Ranellucci
4f1b56f004 Fix regression causing the plater to merge all materials into a single one, thus not producing multi-extrusion prints 2012-10-21 20:56:19 +02:00
Alessandro Ranellucci
f5f9574173 Merge pull request #722 from mesheldrake/remove-dups-before-hull 
use remove_coinciding_points before convex_hull
 2012-10-15 02:49:30 -07:00
Alessandro Ranellucci
149d9e737b Merge pull request #721 from mesheldrake/parallel-degrees-limit 
parallel_degrees_limit decreased, 3 to 0.1, #704
 2012-10-15 02:48:16 -07:00
Alessandro Ranellucci
50161497f3 Merge pull request #720 from mesheldrake/increase-offset-scale 
Increase scale factor for Clipper::offset
 2012-10-15 02:47:16 -07:00
Alessandro Ranellucci
6b4f038d17 Update copies number when decreasing parts. #747 2012-10-15 10:59:54 +02:00
Alessandro Ranellucci
769134bb6f Fixed regression causing skirt ignoring the first layer extrusion width override. #728 2012-10-15 10:57:15 +02:00
Alessandro Ranellucci
8ac367bfa7 If brim overlaps with skirt, make brim around skirt too instead of just ignoring skirt on first layer 2012-10-14 22:10:49 +02:00
Alessandro Ranellucci
b92642459f Merge branch 'master' into dynamic-flow 
Conflicts:
	lib/Slic3r/Flow.pm
	lib/Slic3r/Layer.pm
 2012-10-04 15:23:19 +02:00
Alessandro Ranellucci
d1e0bcf113 Bugfix: tool numbers written in G-code were wrong 2012-10-01 18:22:35 +02:00
Alessandro Ranellucci
1a6eaeaa91 Bugfix: split wasn't working properly under threaded perls 2012-10-01 18:12:14 +02:00
Alessandro Ranellucci
2c400ee2b8 Removed useless warning 2012-10-01 16:49:02 +02:00
Alessandro Ranellucci
faaf6d90b8 Bump version number 2012-09-28 17:44:38 +02:00
Alessandro Ranellucci
6bb4c28b01 Release 0.9.3 2012-09-28 17:06:19 +02:00
Alessandro Ranellucci
86e3508402 Add menu item pointing to documentation 2012-09-28 16:58:03 +02:00
Alessandro Ranellucci
22b312395a Fix SVG/DLP support material. #673 2012-09-28 16:32:53 +02:00
Alessandro Ranellucci
c68862582c Fix fatal error on empty layers caused by recent large refactorings 2012-09-28 15:48:32 +02:00
Alessandro Ranellucci
ab7697ec1c New option to force a solid layer every given number of layers. #617 2012-09-28 15:46:29 +02:00
Alessandro Ranellucci
f50b0040ef Bugfix: the grow() method wasn't working properly, causing bad brim/support material interface. #639 2012-09-28 15:27:33 +02:00
Alessandro Ranellucci
9ee9b54c73 Output an error if user tries to use 100% density with a non-solid fill pattern. #691 2012-09-28 14:13:06 +02:00
Alessandro Ranellucci
a49b045ce4 Do not call srand for each layer, to get better randomization of starting points. #694 2012-09-28 14:01:59 +02:00
Mike Sheldrake
4b91496edd use remove_coinciding_points before convex_hull 
convex_hull returns polygons with sharp concaves sometimes when
duplicate points are present
 2012-09-27 06:47:38 -07:00
Mike Sheldrake
5ee68aa916 $parallel_degrees_limit decreased, 3 to 0.1, #704 
Geometry::lines_parallel() test used for collapsing adjacent colinear
lines was too loose in testing for colinearity, because of this constant
setting. Gradualy curving and high-res outer perimiters would
over-simplify into straight lines.
 2012-09-27 06:14:54 -07:00
Mike Sheldrake
2bcac88683 Increase scale factor for Clipper::offset 
A default scale of 1 was being calculated most of the time. That's too
low to avoid artifacts from offsetting concave curves. Setting scale to
a default of 100000 eliminates artifacts in the test cases in issues
#700, #702 and #703. There is a risk of large point proliferation with
this scale in combination with the JT_ROUND option, but in the four
places where that option is used, scale is already explicitly set to a
safer low value.
 2012-09-27 05:50:54 -07:00
Alessandro Ranellucci
fd74577eae Fix typo in previous commit 2012-09-24 21:00:26 +02:00
Alessandro Ranellucci
d8c192ae05 Fix fatal error caused by recent refactorings 2012-09-23 18:07:44 +02:00
Alessandro Ranellucci
1f4706f02f [print_preset] and others were erroneously renamed to [print] etc. #675 2012-09-23 17:40:34 +02:00
Alessandro Ranellucci
77625894ff New command to combine multiple STL files into a single multi-material AMF file 2012-09-23 14:48:58 +02:00
Alessandro Ranellucci
bbe0a45b58 Optimization: cache scaled flow width and spacing 2012-09-23 03:03:08 +02:00
Alessandro Ranellucci
ec0d3987db Rename materials to regions 2012-09-23 02:52:31 +02:00
Alessandro Ranellucci
e696764af8 Assign extruders and flows to materials 2012-09-23 02:40:25 +02:00
Alessandro Ranellucci
e2ab340edb Fix positioning and other things 2012-09-22 21:03:57 +02:00
Alessandro Ranellucci
d488afd243 More work (breaks centering and internal surfaces detection) 2012-09-22 19:38:25 +02:00
Alessandro Ranellucci
02356fd613 Large refactoring to allow processing multimaterial files 2012-09-22 19:04:36 +02:00
Alessandro Ranellucci
04be94023b Refactoring: move the 'copies' property to each Print::Object 2012-09-22 16:19:24 +02:00
Alessandro Ranellucci
82ac4722d2 Refactoring, new size_3D function 2012-09-22 16:12:54 +02:00
Alessandro Ranellucci
b5672de3ca Refactoring, new bounding_box_3D function 2012-09-22 16:10:24 +02:00
Alessandro Ranellucci
91e9f651b5 Bugfix: --avoid-crossing-perimeters was crashing when processing empty layers 2012-09-22 15:51:18 +02:00
Alessandro Ranellucci
35e449e891 Make new plater compatible with threaded perls 2012-09-21 17:45:54 +02:00
Alessandro Ranellucci
037be34b7b Bugfix: removed fatal error when generating SVG support material in some circumstances. #673 2012-09-21 16:52:05 +02:00
Alessandro Ranellucci
c6c7dd12da Silently ignore threads > 1 on non-threaded perls 2012-09-21 16:43:46 +02:00
Alessandro Ranellucci
27b71d8885 Little regressions after recent merge 2012-09-21 16:08:22 +02:00
Alessandro Ranellucci
392309a369 Little cleanup 2012-09-21 15:58:44 +02:00
Alessandro Ranellucci
e21fdf0b15 Little cleanup 2012-09-21 15:47:38 +02:00
Alessandro Ranellucci
2f1ae3f112 Restore non-manifold warnings 2012-09-21 15:46:40 +02:00
Alessandro Ranellucci
c95cd5ac38 Merge branch 'master' into avoid-crossing-perimeters 2012-09-21 15:36:45 +02:00
Alessandro Ranellucci
46cbdcdc4e Merge branch 'master' into dynamic-flow 2012-09-21 15:36:33 +02:00
Alessandro Ranellucci
f638558167 Preserve position when splitting objects in plater 2012-09-21 15:35:32 +02:00
Alessandro Ranellucci
e40f32995f Finish GUI decoupling 2012-09-21 15:04:33 +02:00
Alessandro Ranellucci
8382eeef0a Revert "Patch for --gcode-arcs (kindly submitted by Paul Howes)" 
This reverts commit f4260ae93d.
 2012-09-21 15:04:19 +02:00
Alessandro Ranellucci
f659dcf088 Patch for --gcode-arcs (kindly submitted by Paul Howes) 2012-09-21 15:04:19 +02:00
Alessandro Ranellucci
757515ba17 New [print_preset], [filament_preset] and [printer_preset] variables. #675 2012-09-21 15:04:18 +02:00
Alessandro Ranellucci
4fbb8ffb9d Replace 'scale epsilon' with 'scaled_epsilon' 2012-09-21 15:04:18 +02:00
Alessandro Ranellucci
87912cb3b0 Bugfix: only_retract_when_crossing_perimeters was almost not working. #680 2012-09-21 15:04:18 +02:00
Alessandro Ranellucci
f314cedd8f Bugfix: extrusion width setting for support material was only affecting the path spacing but not the actual flow. #666 2012-09-21 15:04:17 +02:00
Alessandro Ranellucci
d848e2d4c9 Warn the user when Slic3r is being run under 5.16 2012-09-21 15:04:17 +02:00
Alessandro Ranellucci
e89f64e9d3 More unfinished work 2012-09-21 15:04:17 +02:00
Alessandro Ranellucci
6adf98edaf Fix regression causing SVG/DLP support material to crash the application. #668 2012-09-21 15:04:16 +02:00
Alessandro Ranellucci
37ae2e1e2d Use support material extruder for brim. #653 2012-09-21 15:04:16 +02:00
Alessandro Ranellucci
3b38e392ad Consider single walls as external perimeters. #661 2012-09-21 15:04:15 +02:00
Alessandro Ranellucci
47c5d410ea Remove the initial retraction compensation. Not only it is not very good for multi-head setups, but it also caused wrong first layer Z when lift was enabled. #655 2012-09-21 15:04:15 +02:00
Alessandro Ranellucci
152c714b87 Bump version number 2012-09-21 15:04:13 +02:00
Alessandro Ranellucci
d7e801fd32 Releasing 0.9.2 2012-09-21 15:04:13 +02:00
Alessandro Ranellucci
202bfa91c8 Adjust M-codes for temperature handling for Teacup. #539 2012-09-21 15:04:12 +02:00
Alessandro Ranellucci
94a096f1d2 Support legacy config files not containing first_layer_height #631 2012-09-21 15:04:11 +02:00
Alessandro Ranellucci
1cedb00f20 Merge branch 'master' into dynamic-flow 
Conflicts:
	lib/Slic3r/ExPolygon.pm
 2012-09-12 16:05:06 +02:00
Alessandro Ranellucci
cc8d8bd26f Merge branch 'master' into avoid-crossing-perimeters 
Conflicts:
	README.markdown
	lib/Slic3r/Config.pm
	lib/Slic3r/GCode.pm
	lib/Slic3r/Print.pm
	slic3r.pl
 2012-09-12 16:04:16 +02:00
Alessandro Ranellucci
2a51cad0c3 Revert "Patch for --gcode-arcs (kindly submitted by Paul Howes)" 
This reverts commit f4260ae93d.
 2012-09-12 15:58:01 +02:00
Alessandro Ranellucci
f4260ae93d Patch for --gcode-arcs (kindly submitted by Paul Howes) 2012-09-12 15:53:24 +02:00
Alessandro Ranellucci
7a5071f66c New [print_preset], [filament_preset] and [printer_preset] variables. #675 2012-09-12 15:29:44 +02:00
Alessandro Ranellucci
e0d5f4e528 Replace 'scale epsilon' with 'scaled_epsilon' 2012-09-12 15:22:43 +02:00
Alessandro Ranellucci
9934f8957f Bugfix: only_retract_when_crossing_perimeters was almost not working. #680 2012-09-12 15:20:37 +02:00
Alessandro Ranellucci
bb5f00cf0c Bugfix: extrusion width setting for support material was only affecting the path spacing but not the actual flow. #666 2012-09-12 12:13:43 +02:00
Alessandro Ranellucci
36796645cb Warn the user when Slic3r is being run under 5.16 2012-09-11 16:02:26 +02:00
Alessandro Ranellucci
628cc52338 Fix regression causing SVG/DLP support material to crash the application. #668 2012-09-06 11:28:24 +02:00
Alessandro Ranellucci
f41a6af343 Use support material extruder for brim. #653 2012-09-06 11:01:44 +02:00
Alessandro Ranellucci
1053947c19 Consider single walls as external perimeters. #661 2012-09-06 10:56:42 +02:00
Alessandro Ranellucci
e0a96c00b3 Remove the initial retraction compensation. Not only it is not very good for multi-head setups, but it also caused wrong first layer Z when lift was enabled. #655 2012-09-06 10:44:48 +02:00
Alessandro Ranellucci
8d7b781473 Bump version number 2012-08-31 00:12:13 +02:00
Alessandro Ranellucci
25f647a60c Releasing 0.9.2 2012-08-30 23:15:42 +02:00
Alessandro Ranellucci
5017f17171 Adjust M-codes for temperature handling for Teacup. #539 2012-08-30 23:13:28 +02:00
Alessandro Ranellucci
b37af86bef Support legacy config files not containing first_layer_height #631 2012-08-30 23:04:56 +02:00
Alessandro Ranellucci
191de5d078 Unfinished work for decoupling GUI from the Print object (goal = more speed for manipulation, less memory usage) 2012-08-29 19:37:27 +02:00
Alessandro Ranellucci
f29d455319 Refactor the AMF parser so that it popolates a Model object directly. Also read constellations 2012-08-29 18:23:34 +02:00
Alessandro Ranellucci
23f6842bd4 Export plates as AMF constellations 2012-08-29 17:12:32 +02:00
Alessandro Ranellucci
f90520ed06 Refactoring: new Slic3r::Model class to represent files 2012-08-29 17:12:32 +02:00
Alessandro Ranellucci
9bd1b0f6ba Revert "Refactoring: initialize all layers at once and avoid duplication of slicing height math". #637 
This reverts commit 08270022dd.
 2012-08-26 17:47:00 +02:00
Alessandro Ranellucci
08270022dd Refactoring: initialize all layers at once and avoid duplication of slicing height math 2012-08-25 20:40:44 +02:00
Alessandro Ranellucci
a1a4d97f9f Remove useless subroutines 2012-08-25 20:14:52 +02:00
Alessandro Ranellucci
a1ac866b84 Refactoring: turn x_length and y_length in size 2012-08-25 20:14:01 +02:00
Alessandro Ranellucci
896641cb7e Fixed regression causing some bridges not to be detected correctly. #629 2012-08-25 20:04:29 +02:00
Alessandro Ranellucci
fe6c8fabdb Make Josef Prusa and Petr Ledvinka happy while we figure out how to handle localized Windows file paths 2012-08-25 19:06:14 +02:00
Alessandro Ranellucci
873ea93832 Fix missing module inclusion preventing the recently introduced option from working 2012-08-25 17:18:12 +02:00
Alessandro Ranellucci
0c22250740 New option to disable retraction when moving between infill paths inside the same island. #29 2012-08-25 16:30:11 +02:00
Alessandro Ranellucci
af1b64a086 Added unit testing to prevent regression about disconnected infill paths 2012-08-25 14:59:34 +02:00
Alessandro Ranellucci
d061534b83 Merge branch 'master' into avoid-crossing-perimeters 
Conflicts:
	README.markdown
	lib/Slic3r/ExPolygon.pm
	slic3r.pl
 2012-08-25 14:26:32 +02:00
Alessandro Ranellucci
0aa224ffad Dynamic extrusion width for better gap filling 2012-08-25 14:23:46 +02:00
Alessandro Ranellucci
65b11fa850 Minor refactoring for better readability of perimeter generation logic 2012-08-24 21:58:51 +02:00
Alessandro Ranellucci
92518d28fc New option to configure the threshold for enforcing solid infill. #224 2012-08-24 19:38:36 +02:00
Alessandro Ranellucci
ba58e0733f Avoid backwards moves when doing honeycomb infill. #492 2012-08-24 19:19:45 +02:00
Alessandro Ranellucci
5281b101f9 Some infill paths were still disconnected, causing unnecessary retractions 2012-08-24 18:59:23 +02:00
Alessandro Ranellucci
56a118986f External motion was crossing still too much 2012-08-23 21:19:10 +02:00
Alessandro Ranellucci
c98e9515ed Better implementation of the external motion planner 2012-08-23 21:10:04 +02:00
Alessandro Ranellucci
27090f83bd Make the motionplanner work again after recent changes to approximation 2012-08-23 17:02:50 +02:00
Alessandro Ranellucci
ee41345ab0 Remove useless Point->id method 2012-08-23 15:46:55 +02:00
Alessandro Ranellucci
0eadc5adba Manual rebase of the avoid_crossing_perimeters feature 2012-08-23 15:42:58 +02:00
Alessandro Ranellucci
d278998f11 Accept newline as separator for post-processing scripts in GUI. #615 2012-08-22 21:27:49 +02:00
Alessandro Ranellucci
b35c41c1a3 Bugfix: retraction was still not working correctly at tool change 2012-08-22 20:31:03 +02:00
Alessandro Ranellucci
edfdf236da Fix for the recent commit about the new retraction settings 2012-08-22 19:47:59 +02:00
Alessandro Ranellucci
4bddb66513 Always emit T0 at the beginning of a multi-extruder print 2012-08-22 19:20:34 +02:00
Alessandro Ranellucci
9e682924c7 New separate options for retraction length to be used when switching tools 2012-08-22 19:11:45 +02:00
Alessandro Ranellucci
075213c731 Refactoring: make 'retracted' an attribute of the Extruder object 2012-08-22 18:57:03 +02:00
Alessandro Ranellucci
97c3756034 Don't force automatic unretraction after tool change 2012-08-22 18:06:50 +02:00
Alessandro Ranellucci
3c2464abf9 Bugfix: crazy temperatures were written when using sequential printing. #625 2012-08-22 17:58:38 +02:00
Alessandro Ranellucci
26e033a30c Bugfix: brim was positioned incorrectly if no skirt was enabled. #627 2012-08-19 20:30:17 +02:00
Henrik Brix Andersen
d6b06e08bc Bump version number 2012-08-19 09:49:43 +02:00
Nicolas Dandrimont
a147530d2a Explicitly avoid passing arguments to remove when called from the event handler 
Wx passes some objects to the callbacks, and we want to ignore those.
 2012-08-11 16:05:17 +02:00
Nicolas Dandrimont
7b0d4cb4e1 Revert "Dereference the Wx object id when removing an object in the plater." 
This reverts commit 4979029cd2.
 2012-08-11 16:00:41 +02:00
Nicolas Dandrimont
4979029cd2 Dereference the Wx object id when removing an object in the plater. 2012-08-11 15:49:06 +02:00
Alessandro Ranellucci
0833b4e021 Releasing 0.9.1 2012-08-10 16:14:35 +02:00
Alessandro Ranellucci
624e16b7e2 Unexpected results splitting objects with threaded perls. #610 2012-08-10 16:05:16 +02:00
Henrik Brix Andersen
2576e3b00a Remove XXX debug output 2012-08-09 23:37:15 +02:00
Alessandro Ranellucci
8289692160 Handle configuration files saved while there was no extruder_offset control for the first extruder 2012-08-09 19:57:49 +02:00
Alessandro Ranellucci
d02012e4a3 Accept multiple --load arguments for GUI too 2012-08-09 00:59:41 +02:00
Alessandro Ranellucci
db8bb8c3d8 Revert "Hide extruder offset settings for the primary extruder" 
This reverts commit 713d87b4c6.
 2012-08-09 00:51:53 +02:00
Alessandro Ranellucci
2bf219a637 Bugfix: random failure to load presets. #600 2012-08-09 00:41:03 +02:00
Alessandro Ranellucci
927b7ce937 Bugfix: skirt height and other options shouldn't be limited to 100. #597 2012-08-08 23:51:40 +02:00
Alessandro Ranellucci
88cbae0d48 Bugfix: saving a printer preset with less extruders than it had resulted in the same number of extruders as before 2012-08-08 22:52:26 +02:00
Alessandro Ranellucci
713d87b4c6 Hide extruder offset settings for the primary extruder 2012-08-08 22:14:05 +02:00
Alessandro Ranellucci
9ca21c835c Merge branch 'per-extruder-retraction-settings' 
Conflicts:
	lib/Slic3r/Config.pm
	lib/Slic3r/GUI/Tab.pm
 2012-08-08 22:06:47 +02:00
Alessandro Ranellucci
55b3b4f0c5 Bump version number 2012-08-08 22:04:06 +02:00
Henrik Brix Andersen
e2b2e369f8 Disable using ENTER key for accessing "Export G-code..." button. 2012-08-08 21:45:17 +02:00
Alessandro Ranellucci
4fcecf5ef6 Bugfix: when an external config was selected in any section, exported settings didn't reflect other sections properly 2012-08-08 19:36:34 +02:00
Alessandro Ranellucci
2f2bc8210a Allow exporting to .g files too 2012-08-08 19:04:36 +02:00
Alessandro Ranellucci
3888727b96 Bugfix: legacy config files with empty temperature and/or first_layer_temperature caused crash 2012-08-08 16:25:13 +02:00
Alessandro Ranellucci
b048f51edd Incomplete label for support material extruder option. #593 2012-08-08 15:21:02 +02:00
Alessandro Ranellucci
d4d305db3b Releasing 0.9.0 2012-08-08 12:29:15 +02:00
Henrik Brix Andersen
0f327ef912 Add missing use File::Spec 2012-08-07 23:37:16 +02:00
Alessandro Ranellucci
c7858912d8 Bugfix: some paths were not considered when generating brim 2012-08-07 22:04:58 +02:00
Alessandro Ranellucci
866b09f3f9 New --extruder-offset option 2012-08-07 21:39:45 +02:00
Alessandro Ranellucci
a2c28fd6da Move retraction settings to a temporary page until we merge the per-extruder-retraction-settings branch 2012-08-07 21:11:58 +02:00
Alessandro Ranellucci
cf01c142de Make retraction configurable for each extruder 2012-08-07 21:08:56 +02:00
Henrik Brix Andersen
640c07a233 Revert 4099c3a8cf 
Presenting detailed statistics about a given slice needs rethinking, as this solution will not scale.
 2012-08-07 21:00:03 +02:00
Alessandro Ranellucci
63e77fcfd8 Refactor extruder settings 2012-08-07 20:50:54 +02:00
Alessandro Ranellucci
106c8fe46f Minor reordering of infill options in GUI; also hide the entire staticbox if threads are not available 2012-08-07 20:22:26 +02:00
Alessandro Ranellucci
2548d5b993 Expose all multi-extruder settings to the GUI 2012-08-07 20:14:28 +02:00
Alessandro Ranellucci
793301d319 Allow to select multiple filaments in GUI when multiple extruders are configured 2012-08-07 18:44:47 +02:00
Alessandro Ranellucci
b7d8444ac8 Take support material into account when generating brim. #490 #501 #567 2012-08-06 20:54:49 +02:00
Alessandro Ranellucci
9bfa4118a1 Bugfix: brim and skirt collision was not precisely detected when they had similar offsets. #548 2012-08-06 20:27:10 +02:00
Alessandro Ranellucci
2616c24ffc Bugfix: plater wasn't initialized with last settings. #573 2012-08-06 19:19:22 +02:00
QuantumConcepts
6bcbc743dd Fixed #586. 2012-08-06 08:23:00 -04:00
Alessandro Ranellucci
a8e9b6926a Bugfix: each tab was loading too much from external config files 2012-08-06 13:03:44 +02:00
Henrik Brix Andersen
49b048c61d Include Wx version number in debug output 2012-08-04 22:19:42 +02:00
Henrik Brix Andersen
b1805ed7f3 Align controls and their associated labels vertically centered. 2012-08-02 23:44:42 +02:00
Henrik Brix Andersen
5518ac9fa6 Add small border on non-wxMAC platforms. Needs testing with wxWidgets 2.9.x on wxMSW + wxGTK. 2012-08-02 23:19:04 +02:00
Henrik Brix Andersen
c1e2bc5bd7 Make the wizard a tiny bit wider to fit the gcode_flavor drop-down under OS X. 2012-08-02 23:08:40 +02:00
Henrik Brix Andersen
ed89038f0b Add work-around for "Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 17". #558 2012-08-02 23:07:42 +02:00
Henrik Brix Andersen
794a090892 Pass explicit tool IDs to ::EnableTool() 2012-08-02 21:49:26 +02:00
Henrik Brix Andersen
69fa308f55 Allocate wxWidget identifiers dynamically to avoid potential conflics. 2012-08-02 21:11:36 +02:00
Henrik Brix Andersen
0e620f3ad2 Make --output accept directories. #535 2012-08-01 17:12:16 +02:00
Henrik Brix Andersen
d1b8f37dda Call print->config before print->expanded_output_filepath. #573 2012-08-01 16:06:03 +02:00
Henrik Brix Andersen
65d6eb551a Try harder to attract user attention on wxMAC. #575 2012-08-01 13:59:43 +02:00
Henrik Brix Andersen
83fccf0875 Fix auto-arrange of objects 2012-07-30 19:30:41 +02:00
Henrik Brix Andersen
0aae15e2a8 Persist last skein directory and last config directory used across application restarts. 2012-07-30 12:08:28 +02:00
Alessandro Ranellucci
0e39a89d01 Fixed regression preventing split from working. #395 2012-07-30 10:00:25 +02:00
Sam Wong
4099c3a8cf #568: Show filament needed statistics in the GUI message box. 2012-07-30 01:24:51 +08:00
Alessandro Ranellucci
4c33eabc6e Slicing from plater was still using the default options 2012-07-29 17:02:46 +02:00
Alessandro Ranellucci
9933132ae6 Bugfix: recent refactoring broke slicing from plater on multi-threaded perls 2012-07-29 15:51:26 +02:00
Alessandro Ranellucci
92754d7cd4 Fix multi-extruder options in GUI 2012-07-28 11:53:10 +02:00
Alessandro Ranellucci
87934a972c Port recent global changes to the wizard 2012-07-28 11:34:12 +02:00
Alessandro Ranellucci
c763f5fc81 Bugfix: fatal error with thin loops after recent refactoring. #562 2012-07-28 11:06:27 +02:00
Henrik Brix Andersen
57b134cc9c Handle recursive ratio_over options correctly. 2012-07-27 22:56:35 +02:00
Henrik Brix Andersen
d68ab84faa Fix quick slicing 2012-07-27 22:03:48 +02:00
Alessandro Ranellucci
7e34244b05 Refactored configuration handling. 
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
 2012-07-27 21:16:11 +02:00
Henrik Brix Andersen
f0579e59bd Include timestamp in .ini files 2012-07-27 14:33:14 +02:00
Henrik Brix Andersen
9f719d42bc Include preset name in confirmation dialog 2012-07-27 14:11:04 +02:00
Henrik Brix Andersen
9e1308c03f Ask for confirmation when deselecting a dirty preset. 2012-07-27 13:57:58 +02:00
Henrik Brix Andersen
848784ad95 Clear dirty when deleting preset. 2012-07-27 13:56:52 +02:00
Henrik Brix Andersen
40f1176346 Be careful not to change the current selection when working around http://trac.wxwidgets.org/ticket/13769 2012-07-27 13:54:45 +02:00
Henrik Brix Andersen
1cc0a79188 Allow the list and buttons to expand upon window resize 2012-07-26 16:50:57 +02:00
Henrik Brix Andersen
7b06255dca Center preset buttons 2012-07-26 16:48:28 +02:00
Henrik Brix Andersen
63e8299f14 Eliminate single-item wxSizer. 2012-07-26 16:41:22 +02:00
Henrik Brix Andersen
85603c1981 Highlight the dragged object. 2012-07-25 10:06:45 +02:00
Henrik Brix Andersen
affaee415b Reset mouse cursor on button up event. 2012-07-25 00:51:41 +02:00
Henrik Brix Andersen
5502537065 Change cursor when hoovering over a movable object. 2012-07-25 00:15:32 +02:00
Henrik Brix Andersen
e02ee17247 Respect multiline option flag. #559 2012-07-24 20:16:34 +02:00
Henrik Brix Andersen
0e6d6a9695 Force sane TAB key order on buttons in GridSizer. 2012-07-24 18:21:02 +02:00
Alessandro Ranellucci
1d364d7823 Refactor OptionsGroup to decouple it from the config repository, add ConfigOptionsGroup 2012-07-24 15:33:11 +02:00
Henrik Brix Andersen
09a222f8b2 Reshuffle code a bit to preserve TAB key order between toolbar and listctrl. 2012-07-24 14:42:38 +02:00
Henrik Brix Andersen
44f3b7d2b5 Allow TAB key navigation of controls. 2012-07-24 14:28:21 +02:00
Henrik Brix Andersen
0b0e531661 Use more generic EVT_KEY_DOWN(). 2012-07-24 14:17:10 +02:00
Henrik Brix Andersen
4bee713579 Add menuitems with keyboard shortcuts to quickly navigate between tabs. 2012-07-24 12:59:02 +02:00
Henrik Brix Andersen
4dc41d2ca3 Intercept TAB key events in the wxTreeCtrl and generate a wxNavigationKeyEvent. 2012-07-24 12:42:58 +02:00
Henrik Brix Andersen
69e075df82 Hidden Sizer items does not take up space, simply show/hide pages instead of removing/adding them. 2012-07-24 12:41:51 +02:00
Henrik Brix Andersen
642bb336eb Add the page before showing it. 2012-07-24 00:34:57 +02:00
Henrik Brix Andersen
37667d87ce Use Wx::Sizer::Detach() instead of Wx::Sizer::Remove() 2012-07-24 00:34:07 +02:00
Alessandro Ranellucci
ea604384dd Typo 2012-07-23 17:56:20 +02:00
Alessandro Ranellucci
ba475cae45 Fixed fatal error introduced after recent refactoring 2012-07-23 17:52:02 +02:00
Henrik Brix Andersen
6f6fb22657 Add menu item hints 2012-07-23 16:31:16 +02:00
Henrik Brix Andersen
ab9ffe9c19 Expose --external-perimeter-speed in the GUI. #556 2012-07-23 09:43:59 +02:00
Alessandro Ranellucci
67b415a2b3 Remove almost duplicated logic for small infill regions detection 2012-07-22 21:06:19 +02:00
Alessandro Ranellucci
144a704e3b Remove all id() and ordered_id() methods 2012-07-22 21:00:02 +02:00
Alessandro Ranellucci
1d04e15b63 Refactor/clean up. Merge remove_small_surfaces() into prepare_fill_surfaces(), rename infill_every_layers() to combine_infill(), remove $layer->fill_boundaries, initialize layer properties explicitely for clarity. 2012-07-22 21:00:02 +02:00
Henrik Brix Andersen
a5d683a9b9 Retire unused class variable 'fields'. 2012-07-22 15:23:42 +02:00
Henrik Brix Andersen
9486a629b3 Fix speling. 2012-07-22 15:06:56 +02:00
Alessandro Ranellucci
3edf42e98e Little workflow simplification 2012-07-21 15:53:38 +02:00
Alessandro Ranellucci
c7bc9bed46 Workaround for a perl 5.10 bug about leaked scalars. #503 2012-07-21 14:45:45 +02:00
Alessandro Ranellucci
f899deb6b6 Prevent internal infill at all when fill density is set to zero. #545 2012-07-21 14:41:21 +02:00
Alessandro Ranellucci
1fdbd2c0e1 Suggest repair in non-manifold warning 2012-07-21 12:07:02 +02:00
Alessandro Ranellucci
bce2663ed8 Restore thin walls and thin fills after last commit 2012-07-20 15:02:25 +02:00
Alessandro Ranellucci
e71472e5d7 Remove debugging statements 2012-07-20 14:41:27 +02:00
Alessandro Ranellucci
1697cb24a6 Memory optimization and code cleanup. Don't keep deserialized paths 2012-07-20 14:39:56 +02:00
Henrik Brix Andersen
52fb02f29d Turn nozzle count printf into debugf statement 2012-07-19 23:31:47 +02:00
Henrik Brix Andersen
35e6420ff5 Make the configuration wizard work on the first extruder. 2012-07-19 22:56:38 +02:00
Alessandro Ranellucci
30a2213fd9 Some multi-extruder options in GUI 2012-07-18 20:44:36 +02:00
Henrik Brix Andersen
9137a6b41e Queue a repaint when changing options page, fixes repaint issue on wxMSW. 2012-07-18 19:19:07 +02:00
Alessandro Ranellucci
b861560c71 Fix tooltips about extrusion widths 2012-07-18 18:16:27 +02:00
Alessandro Ranellucci
2495a77c0f Add to GUI the setting for support material extrusion width. Also, populate %Groups with new options 2012-07-18 18:15:18 +02:00
Alessandro Ranellucci
b209eab712 Bugfix: the delete button was deleting the wrong preset 2012-07-18 16:17:23 +02:00
Alessandro Ranellucci
f173096a6c Merge branch 'new-gui' 
Conflicts:
	lib/Slic3r.pm
	lib/Slic3r/Config.pm
	lib/Slic3r/GUI/OptionsGroup.pm
	lib/Slic3r/GUI/SkeinPanel.pm
	lib/Slic3r/Print.pm
 2012-07-18 15:48:04 +02:00
Alessandro Ranellucci
2d17a94a38 Prevent the left treectrl to grow if preset names are too long 2012-07-18 12:00:19 +02:00
Alessandro Ranellucci
42034ecb40 Autosize the main frame to workaround inconsistencies among wxGTK setups 2012-07-18 11:55:26 +02:00
Henrik Brix Andersen
fd88c164d2 Move Repeat Last Quick Slice below other Quick Slice items since it works for both. 2012-07-17 23:54:30 +02:00
Henrik Brix Andersen
a8d5ee3a74 Only enable Repeat Last Quick Slice menu item after the first quick slice. 2012-07-17 23:53:16 +02:00
Henrik Brix Andersen
c25a31ef98 Avoid SVG slicing interfering with repeating last quick slice. 2012-07-17 23:51:57 +02:00
Henrik Brix Andersen
bd16366d62 Default to "No" when prompting about discarding unsaved changes. 2012-07-17 23:24:21 +02:00
Henrik Brix Andersen
82cfc7c3d6 Check for unsaved presets before interactively loading an existing config file. 2012-07-17 23:16:58 +02:00
Henrik Brix Andersen
de47f5fe72 Use default desktop notification timeout. 2012-07-17 15:38:53 +02:00
Ryan Voots
19f4036d8a Time here is in milliseconds, setting it to 1500 to make it stay for at least 1.5 seconds. 2012-07-16 19:04:25 -04:00
Henrik Brix Andersen
3690b0798e Use Net::DBus instead of Gtk2::Notify due to less dependencies; recommended by @beanz. 2012-07-16 23:43:09 +02:00
Henrik Brix Andersen
095607a166 Remove excessive line breaks 2012-07-16 23:09:55 +02:00
Henrik Brix Andersen
99845955b3 Add support for libnotify notifications. 2012-07-16 22:37:31 +02:00
Henrik Brix Andersen
5d2fd17715 Use constants for menu item IDs. 2012-07-16 20:57:10 +02:00
Henrik Brix Andersen
e80d2813ed Add keyboard shortcut for SVG slicing. 2012-07-16 19:23:51 +02:00
Henrik Brix Andersen
225414724c Add keyboard accelerators to menus. 2012-07-16 19:13:35 +02:00
Henrik Brix Andersen
a6da019fc6 Adhere to various human interface guidelines. 2012-07-16 18:34:44 +02:00
Henrik Brix Andersen
fda21bd6f2 Only set $last_skein_dir from Plater, not $last_skein_file, to avoid interfering with Quick Slice. 2012-07-16 00:28:15 +02:00
Henrik Brix Andersen
b24e0370dd Remove unused argument. 2012-07-15 23:59:50 +02:00
Henrik Brix Andersen
da7a668c94 Remove confirmation dialog on plate slicing done, request user attention instead. #537 2012-07-15 23:57:31 +02:00
Henrik Brix Andersen
a2a35f47f6 Convert Slic3r::GUI::notify() from class method to instance method. 2012-07-15 23:36:18 +02:00
Henrik Brix Andersen
9f3031a069 Remove Quick Slice button, move update text to statusbar. 2012-07-15 23:06:07 +02:00
Henrik Brix Andersen
102aea4531 Sync message dialog title with SkeinPanel.pm changes. 2012-07-15 22:53:32 +02:00
Henrik Brix Andersen
c35b57fb0b Add spacer for correctly aligning top text under wxGTK. 2012-07-15 22:44:52 +02:00
Henrik Brix Andersen
e01b20ec8e Add shortcuts keys for often used menu items. 2012-07-15 22:38:58 +02:00
Henrik Brix Andersen
5ef495a601 Improve repeated quick slice menu item text 2012-07-15 22:28:05 +02:00
Henrik Brix Andersen
314772b314 Improve message dialog texts a bit. 2012-07-15 22:25:04 +02:00
Henrik Brix Andersen
8042d5d701 Add borders to toolbar and list view. 2012-07-15 22:14:34 +02:00
Henrik Brix Andersen
0ab7e7ad7f Show icons above text in toolbar. 2012-07-15 20:11:49 +02:00
Henrik Brix Andersen
bd77c33919 Add sunken border to tree controls. 2012-07-15 20:05:57 +02:00
Alessandro Ranellucci
1c6789e042 Remove duplicate_mode from options list 2012-07-15 19:36:56 +02:00
Alessandro Ranellucci
23fd8de1f5 Warn user if supplied preset name is not valid 2012-07-15 18:55:01 +02:00
Alessandro Ranellucci
b37a77ee63 Apply command line options to GUI 2012-07-15 18:37:00 +02:00
Alessandro Ranellucci
9210c708fc Compatibility with --load and new GUI 2012-07-15 17:55:58 +02:00
Henrik Brix Andersen
e228b834e2 Retire the 'important' flag for options now that we have a configuration wizard. 2012-07-15 16:37:59 +02:00
Alessandro Ranellucci
606b9e49a7 Set first layer extrusion width to 200% by default 2012-07-15 15:53:08 +02:00
Alessandro Ranellucci
0aa3cc230f Merge branch 'new-flow' 2012-07-14 21:40:57 +02:00
Henrik Brix Andersen
4a94c64f7d Silence warning by importing Wx::Print before Wx::Html 2012-07-14 11:58:58 +02:00
Henrik Brix Andersen
57316a4ffa Add custom about dialog. 2012-07-13 23:46:39 +02:00
Alessandro Ranellucci
e703e78504 A typo caused no newline after Tn. #530 2012-07-11 21:48:30 +02:00
Henrik Brix Andersen
500e44f8ea Reposition of Slic3r::GUI::ProgressStatusBar fields are only needed in ::OnSize() 2012-07-11 16:55:47 +02:00
Henrik Brix Andersen
5e5dc02016 Add menu item shortcut for http://slic3r.org/ 2012-07-11 16:31:17 +02:00
Henrik Brix Andersen
772ee033e0 Remove dead code. 2012-07-10 23:17:03 +02:00
Henrik Brix Andersen
025c3a1b07 Fix statusbar cancel button size on wxGTK. #431 2012-07-10 23:09:11 +02:00
Alessandro Ranellucci
079f6072a6 Use M109 P1 for Teacup 2012-07-10 19:31:09 +02:00
Henrik Brix Andersen
c144afe52b Allow specifying --first-layer-height without leading zero. #518 2012-07-08 23:02:40 +02:00
Henrik Brix Andersen
37a4967883 Remove dead code. 2012-07-08 22:43:52 +02:00
Henrik Brix Andersen
023e7254c7 Make reports of time spent on slicing more user-friendly. 2012-07-08 22:16:46 +02:00
Henrik Brix Andersen
cd7ea418e2 Fix background logo on wxMSW. 
Wx::StaticText + Wx::StaticBitmap does not support transparent backgrounds on wxMSW; fixed by using a custom paint routine instead.
 2012-07-08 19:41:13 +02:00
Henrik Brix Andersen
0266729635 Merge branch 'master' into new-flow 2012-07-06 22:10:47 +02:00
Henrik Brix Andersen
9f4444a7d4 Add missing sprintf spotted by olasd 
Fixes 3c00573805
 2012-07-06 22:09:17 +02:00
Alessandro Ranellucci
4f6934bab8 Merge branch 'master' into new-flow 2012-07-06 20:06:09 +02:00
Alessandro Ranellucci
3c00573805 Reset E and compensate retraction after changing extruder 2012-07-06 19:57:58 +02:00
Alessandro Ranellucci
96574e601f Infill flow wasn't adjusted for non-solid surfaces 2012-07-05 10:34:02 +02:00
Alessandro Ranellucci
7656167a0a Infill flow wasn't adjusted for non-solid surfaces 2012-07-05 10:32:29 +02:00
Alessandro Ranellucci
3714fbe0f9 Fixed regression causing random extrudates outside the object perimeter 2012-07-04 10:35:42 +02:00
Alessandro Ranellucci
e4294cffce Fixed regression causing random extrudates outside the object perimeter 2012-07-04 10:35:03 +02:00
Alessandro Ranellucci
9e77e6e8b6 Removed comment about the shortest path search for honeycomb not being useful: it is. #512 2012-07-04 10:02:45 +02:00
Alessandro Ranellucci
77123ada7c New spacing math. Speed optimizations 2012-07-04 09:33:33 +02:00
Alessandro Ranellucci
dd37867324 Bugfix: wrong spacing was calculated 2012-07-04 09:33:33 +02:00
Henrik Brix Andersen
0982203f76 Fix configuration wizard background under wxGTK 2012-07-04 00:38:23 +02:00
Henrik Brix Andersen
a5c772a488 Add semi-transparent Slic3r icon as backdrop for the configuration wizard 2012-07-04 00:03:05 +02:00
Alessandro Ranellucci
566a0456ca Fixed regression causing objects to be 0.1mm larger. #495 #507 2012-07-03 20:34:19 +02:00
Alessandro Ranellucci
5a8c4bf1bf Move Load Config... and Export Config... to the File menu 2012-07-03 19:16:45 +02:00
Henrik Brix Andersen
3b873ab493 Merge branch 'wizard' into new-gui 2012-07-03 18:25:32 +02:00
Henrik Brix Andersen
3fa58cf85b Add a friendly index 2012-07-03 17:21:32 +02:00
Henrik Brix Andersen
92ec70c860 Use wxDefaultPosition and wxDefaultSize to improve readability 2012-07-03 01:20:30 +02:00
Henrik Brix Andersen
e8a20eed6a Use wxDefaultSize instead of [-1, -1] 2012-07-03 00:42:06 +02:00