Alessandro Ranellucci
|
ac08cf7469
|
Disable arc compensation code
|
2012-06-23 20:19:58 +02:00 |
|
Alessandro Ranellucci
|
44c636aea1
|
Do not oversimplify outer perimeters and keep the full resolution of the input file. #340 #462
|
2012-06-23 20:08:08 +02:00 |
|
Alessandro Ranellucci
|
ca8a91b2b0
|
Only apply arc compensation to circular holes. #418
|
2012-06-14 15:06:22 +02:00 |
|
Alessandro Ranellucci
|
c0c53c4397
|
Fill gaps. #281
|
2012-06-07 15:31:51 +02:00 |
|
Alessandro Ranellucci
|
85ef7ce665
|
Bugfix: many thin walls were not detected correctly. #313
|
2012-06-06 21:27:39 +02:00 |
|
Alessandro Ranellucci
|
82dd3c7a3e
|
New --perimeters-extrusion-width and --infill-extrusion-width options. #302
|
2012-06-06 18:05:03 +02:00 |
|
Alessandro Ranellucci
|
8a031fe501
|
New --first-layer-extrusion-width option. #385
|
2012-06-06 17:29:12 +02:00 |
|
Alessandro Ranellucci
|
16b774603c
|
Accept either absolute or relative values for --first-layer-height. #151
|
2012-06-06 16:11:38 +02:00 |
|
Alessandro Ranellucci
|
2c28d2f874
|
Bugfix: with 0 solid layers, no infill was generated at all on fist and last layer. #325
|
2012-05-22 12:24:48 +02:00 |
|
Alessandro Ranellucci
|
494f4f94bf
|
After recent memory optimizations, no solid layers were made when using fill density == 0
|
2012-05-20 17:28:53 +02:00 |
|
Alessandro Ranellucci
|
12c6e39837
|
Bugfix: hole compensation was making holes too large. #348
|
2012-05-19 23:12:21 +02:00 |
|
Alessandro Ranellucci
|
fa4f2c8b97
|
New option to randomize starting points across layers
|
2012-05-19 22:36:29 +02:00 |
|
Alessandro Ranellucci
|
b246480535
|
Massive reduction of memory usage (down to one third).
|
2012-05-19 17:57:38 +02:00 |
|
Alessandro Ranellucci
|
882a022e3a
|
Even more constants, less memory, more speed
|
2012-05-19 16:04:33 +02:00 |
|
Alessandro Ranellucci
|
aa9563f00b
|
More constants, less strings => ess memory usage
|
2012-05-19 15:40:11 +02:00 |
|
Alessandro Ranellucci
|
4bffa9cb6b
|
Use perimeter length, not area, to detect small perimeters. #355
|
2012-05-14 00:30:52 +02:00 |
|
Alessandro Ranellucci
|
edbdc5ec55
|
New automatic detection of additional required perimeters for better quality with domes and sloping walls. #198
|
2012-05-05 16:36:10 +02:00 |
|
Alessandro Ranellucci
|
dde71418d4
|
Bugfix: skip arc compensation when holes are not round
|
2012-05-02 16:28:47 +02:00 |
|
Alessandro Ranellucci
|
d164d13517
|
Bugfix: arc compensation code was filling some small holes
|
2012-05-01 19:19:31 +02:00 |
|
Alessandro Ranellucci
|
710275f7c0
|
Reverse perimeter order for holes. #214
|
2012-05-01 15:33:24 +02:00 |
|
Alessandro Ranellucci
|
da43cd70b2
|
Prevent tiny extrusion points. #323
|
2012-05-01 15:25:35 +02:00 |
|
Alessandro Ranellucci
|
21893efa68
|
Removed a debugging statement left in, preventing hole compensation
|
2012-05-01 15:09:32 +02:00 |
|
Alessandro Ranellucci
|
ee33d570d7
|
Use Douglas-Peucker simplification always and remove the inefficient parallel lines merging algorithm. #277
|
2012-05-01 11:41:08 +02:00 |
|
Alessandro Ranellucci
|
a165ad4ecb
|
Large memory saving and speed boost
|
2012-05-01 10:53:52 +02:00 |
|
Alessandro Ranellucci
|
ed4a5739f6
|
Multiple objects autoplating (--merge, from command line only)
|
2012-04-29 12:51:20 +02:00 |
|
Alessandro Ranellucci
|
96d5e513b8
|
Rename $Slic3r::resolution to $Slic3r::scaling_factor
|
2012-04-16 14:05:38 +02:00 |
|
Alessandro Ranellucci
|
d51ba94e8a
|
Remove XXX from dependencies
|
2012-04-16 14:03:36 +02:00 |
|
Alessandro Ranellucci
|
1845abab70
|
Bugfix: warnings when trying to process bridges with no anchors
|
2012-04-12 10:30:54 +02:00 |
|
Alessandro Ranellucci
|
70e69be60a
|
Bugfix: support material was generated under most bridges
|
2012-02-25 21:39:01 +01:00 |
|
Alessandro Ranellucci
|
375829204f
|
Removed the bogus hole code which is not necessary anymore. Also fixes #160
|
2012-02-19 16:02:58 +01:00 |
|
Alessandro Ranellucci
|
7b67fae686
|
Support material
|
2012-02-19 12:03:36 +01:00 |
|
Alessandro Ranellucci
|
eb33c03926
|
Bugfix: flow wasn't adjusted for first layer according to its height setting. #182
|
2012-01-30 14:03:12 +01:00 |
|
Alessandro Ranellucci
|
c5b6787a19
|
Print the number of bogus holes to debug output
|
2012-01-21 11:24:26 +01:00 |
|
Alessandro Ranellucci
|
d1ad02cc71
|
Removed one more fatal error caused by recent refactoring
|
2012-01-18 19:28:49 +01:00 |
|
Alessandro Ranellucci
|
bba91fc0a5
|
Some better debug messages and a note about self-intersecting polygons. #160
|
2012-01-18 18:59:34 +01:00 |
|
Alessandro Ranellucci
|
90d10b24a8
|
Fill gaps using medial axis detection
|
2012-01-12 22:05:35 +01:00 |
|
Alessandro Ranellucci
|
5fefcc0dc4
|
More fixes after refactoring
|
2012-01-11 23:14:59 +01:00 |
|
Alessandro Ranellucci
|
468f09d3c1
|
Bugfix: small surfaces where still infilled even with fill_density = 0
|
2012-01-11 22:38:06 +01:00 |
|
Alessandro Ranellucci
|
0184b0f205
|
Fixed many little things that were not updated along with recent large refactoring. #157 #144
|
2012-01-11 20:13:26 +01:00 |
|
Alessandro Ranellucci
|
8ed91a8ec4
|
Very large refactoring. Ditched Slic3r::Polyline::Closed and reorganized geometric classes.
|
2011-12-30 19:59:51 +01:00 |
|
Alessandro Ranellucci
|
f08ebe97b2
|
Bugfix: fatal error for some models and thin walls not considered for skirt
|
2011-12-30 18:51:48 +01:00 |
|
Alessandro Ranellucci
|
1c7564e4a4
|
Thin walls. #24
|
2011-12-30 17:17:37 +01:00 |
|
Alessandro Ranellucci
|
a86bc260e7
|
Bugfix: some islands having ho holes and contained in holes themselves were ignored
|
2011-12-24 11:01:28 +01:00 |
|
Alessandro Ranellucci
|
98a8c64ed7
|
Extended (and fixed) unit testing to track down (and fix) an issue caused by floating point math that reversed some holes into contours when they should actually be ignored
|
2011-12-22 11:24:46 +01:00 |
|
Alessandro Ranellucci
|
fbea5dae8f
|
Bugfix: consider holes when searching for supporting surfaces
|
2011-12-20 22:37:59 +01:00 |
|
Alessandro Ranellucci
|
e2a5c2119f
|
Bugfix: some holes were skipped
|
2011-12-19 12:09:14 +01:00 |
|
Alessandro Ranellucci
|
1e6ecd9eab
|
Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap.
|
2011-12-17 19:52:34 +01:00 |
|
Alessandro Ranellucci
|
4bee1a12b8
|
Take overlap into account for external dimensions
|
2011-12-14 11:21:43 +01:00 |
|
Alessandro Ranellucci
|
56691c1dea
|
Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112
|
2011-12-13 17:34:31 +01:00 |
|
Alessandro Ranellucci
|
0a74e068a3
|
Merge branch 'infill-overlap'
|
2011-12-08 10:53:24 +01:00 |
|
Alessandro Ranellucci
|
d9a70ea80d
|
Customizable overlap ratio (it defaults to 0.15 now)
|
2011-12-08 10:53:07 +01:00 |
|
Alessandro Ranellucci
|
1f64a01ed4
|
Remove empty layers from bottom. They could be caused by little contact with the print bed, resulting in the need of thin walls. While thin walls will be supported one day, it's still not optimal to have so little contact on bottom layer(s), so we remove such layers. #96
|
2011-12-08 10:25:19 +01:00 |
|
Alessandro Ranellucci
|
2ba513bdb2
|
Bugfix: after recent changes, objects had slight dimension errors. #56
|
2011-12-05 18:48:48 +01:00 |
|
Alessandro Ranellucci
|
eb64cc4965
|
More fixes for bridges. #58
|
2011-12-04 18:37:37 +01:00 |
|
Alessandro Ranellucci
|
d056535bd8
|
Further corrections to the bridge angle detection algorithm. #58
|
2011-12-04 17:19:03 +01:00 |
|
Alessandro Ranellucci
|
4fe340cc56
|
Many fixes to the bridge direction detection algorithm and other things. #58
|
2011-12-03 18:31:31 +01:00 |
|
Alessandro Ranellucci
|
792960aae1
|
Slic3r should now be able to detect optimal bridging direction for any kind of bridge. #58
|
2011-12-02 23:35:39 +01:00 |
|
Alessandro Ranellucci
|
f7a9c9be63
|
Bugfix: sometimes holes were detected as contours
|
2011-12-01 20:57:38 +01:00 |
|
Alessandro Ranellucci
|
133f3a0495
|
Bugfix: Clipper error occurred under certain circumstances
|
2011-12-01 19:40:45 +01:00 |
|
Alessandro Ranellucci
|
b03afc7f1c
|
Bugfix: some bridges were not detected correctly. #57
|
2011-11-30 20:32:28 +01:00 |
|
Alessandro Ranellucci
|
42383dec84
|
Warn about models with overlapping or intersecting facets but try to repair wrong layers. #16
|
2011-11-30 16:28:09 +01:00 |
|
Alessandro Ranellucci
|
d51a37a0ae
|
Refactoring: moved slicing code to new TriangleMesh class, leaving in STL just what's needed to read that particular input format. Slic3r will now warn if model is not manifold. #16
|
2011-11-30 16:07:31 +01:00 |
|
Alessandro Ranellucci
|
d168ecbb4e
|
Bugfix: fill density = 0 was preventing generation of extra solid layers. #75
|
2011-11-29 10:15:50 +01:00 |
|
Alessandro Ranellucci
|
4cdd0f6fd0
|
Bugfix: sparse and wrong infill was generated for objects with null fill density. Also fixed a division by zero.
|
2011-11-27 10:12:44 +01:00 |
|
Alessandro Ranellucci
|
8598b66b0a
|
Large refactoring. Cleaner logic, smaller memory footprint.
|
2011-11-23 12:29:27 +01:00 |
|
Alessandro Ranellucci
|
13ef24b5eb
|
Fixes, improvements and refactoring for bridges and solid surfaces.
|
2011-11-23 09:49:39 +01:00 |
|
Alessandro Ranellucci
|
84d9f5fd9d
|
Bugfix: some regions near bridges were left blank. #58
|
2011-11-21 21:05:00 +01:00 |
|
Alessandro Ranellucci
|
36e1ea0caa
|
Make sure bridges don't overlap. #58
|
2011-11-21 16:35:10 +01:00 |
|
Alessandro Ranellucci
|
74786185e4
|
Don't die on non-manifold models, after having tried the slower detection algorithm too. #16
|
2011-11-21 16:09:13 +01:00 |
|
Alessandro Ranellucci
|
bde3c11e82
|
Fixes to the new bridging algorithm. It appears to be working fine now
|
2011-11-20 22:09:59 +01:00 |
|
Alessandro Ranellucci
|
4540f2377d
|
Some minor fixes for the new bridging logic #58
|
2011-11-19 17:31:00 +01:00 |
|
Alessandro Ranellucci
|
a1c766cc52
|
New bridging logic, more robust. #58
|
2011-11-19 16:44:24 +01:00 |
|
Alessandro Ranellucci
|
1a066caecc
|
Compute bridge overlap as twice the total thickness of perimeters
|
2011-11-17 10:41:20 +01:00 |
|
Alessandro Ranellucci
|
580f42c1de
|
Use the same bridging logic for "reverse bridges" (top surfaces)
|
2011-11-17 10:34:40 +01:00 |
|
Alessandro Ranellucci
|
47c0da8110
|
Bugfix: some solid layers were skipped. #47
|
2011-11-16 14:53:30 +01:00 |
|
Alessandro Ranellucci
|
75a71a23a5
|
New --first-layer-height-ratio option. #36
|
2011-11-13 19:08:19 +01:00 |
|
Alessandro Ranellucci
|
c5d5e4d244
|
Cleanup lines resulting from plane intersection before detecting polygons. This allows for more tolerance with dirty models. Performance impact depends on how many layers are detected as dirty. #16 #28
|
2011-11-12 10:18:20 +01:00 |
|
Alessandro Ranellucci
|
fec816b065
|
Collect undetected lines (caused by dirty or non-manifold models), warn the user, post debug info. Includes some further ExPolygon refactoring.
|
2011-11-11 10:21:48 +01:00 |
|
Alessandro Ranellucci
|
0b42139e54
|
Print first layer at Z = 1 * layer_height instead of zero like it was until now. #17
|
2011-11-07 16:04:27 +01:00 |
|
Alessandro Ranellucci
|
7f341cfcd3
|
New --fill-every-layers option to get high accuracy on external surfaces while speeding up infill
|
2011-10-18 15:57:53 +02:00 |
|
Alessandro Ranellucci
|
5090ae561c
|
Refactored Perimeter code with new Slic3r::Polygon and Slic3r::ExPolygon objects
Large refactoring. Speed gains. Removed convex hull for bridges.
|
2011-10-15 21:14:13 +02:00 |
|
Alessandro Ranellucci
|
56619871b2
|
Bugfix: some bridges had wrong perimeters inside
|
2011-10-13 22:22:45 +02:00 |
|
Alessandro Ranellucci
|
c97a89c07c
|
Refactored Line objects to arrayrefs
|
2011-10-12 16:27:40 +02:00 |
|
Alessandro Ranellucci
|
e410410dc7
|
Refactoring. Point objects are now plain arrayrefs. Slicing is 30% faster.
|
2011-10-12 14:54:49 +02:00 |
|
Alessandro Ranellucci
|
f01ddae974
|
Some compatibility bugs. Slic3r will still fail hard with non-manifold objects
|
2011-10-11 15:51:08 +02:00 |
|
Alessandro Ranellucci
|
34681af6ae
|
Improvements for bottom and top surfaces perimeters
|
2011-10-10 16:31:37 +02:00 |
|
Alessandro Ranellucci
|
84abd41cf4
|
Fixes for bridges
|
2011-10-09 22:18:06 +02:00 |
|
Alessandro Ranellucci
|
459577f9a2
|
Completely rewritten the slicing algorithm
It should work with any model now. There are still problems with some
bridges.
|
2011-10-09 19:47:21 +02:00 |
|
Alessandro Ranellucci
|
ad27f25c71
|
Skeining algorithm totally rewritten
|
2011-10-08 19:02:05 +02:00 |
|
Alessandro Ranellucci
|
743f2abcf2
|
Detection of optimal infill direction for bridges. Includes many fixes and improvements.
|
2011-10-07 19:07:57 +02:00 |
|
Alessandro Ranellucci
|
bfd1d0e1dd
|
Got rid of Math::Geometry::Planar
|
2011-10-06 12:39:58 +02:00 |
|
Alessandro Ranellucci
|
2da5ee7448
|
Bugfixes and improvements in surface detection
|
2011-10-04 22:27:45 +02:00 |
|
Alessandro Ranellucci
|
794b7a99d2
|
Fixes for hi-res STL models
|
2011-10-04 17:55:55 +02:00 |
|
Alessandro Ranellucci
|
25ea8a0204
|
Bugfixes for complex and dirty geometries
|
2011-09-30 15:46:48 +02:00 |
|
Alessandro Ranellucci
|
478047fad3
|
Fixes and improvements after testing with more complex objects
|
2011-09-26 14:48:22 +02:00 |
|
Alessandro Ranellucci
|
c2a62891da
|
Remove features that are too small to be printed
|
2011-09-26 11:59:06 +02:00 |
|
Alessandro Ranellucci
|
18c7aef1a7
|
Lots of changes and refactoring after testing with hollow objects
|
2011-09-18 19:28:12 +02:00 |
|
Alessandro Ranellucci
|
26b05ab155
|
Replaced Moose with Moo => big performance boost and easier packaging
|
2011-09-06 11:50:43 +02:00 |
|
Alessandro Ranellucci
|
ff5044c031
|
Implemented skirt
|
2011-09-05 20:00:59 +02:00 |
|
Alessandro Ranellucci
|
5595839b31
|
Command line interface
|
2011-09-05 13:33:09 +02:00 |
|