PavelSindler
e0c1e4a02d
version which should on all printer versions: autoload, selftest, filament detection, filament sensors initialization, filament menus
2019-01-24 01:12:30 +01:00
PavelSindler
eec869b73a
Merge pull request #1477 from MRprusa3d/PFW-723
...
PID / manage_heater
2019-01-24 00:31:23 +01:00
MRprusa3d
15b45df9fb
PID / manage_heater
...
better build-warnings elimination
2019-01-23 20:14:40 +01:00
MRprusa3d
867182c266
minTemp
...
more user-proof solution
2019-01-23 18:50:13 +01:00
Robert Pelnar
c4d5b58c37
Merge remote-tracking branch 'upstream/MK3' into MK3-bed_fast_pwm
...
# Conflicts:
# Firmware/temperature.cpp
resolved
2019-01-23 17:04:41 +01:00
PavelSindler
54f8f4eb4d
Merge pull request #1460 from MRprusa3d/PFW-723
...
Pfw 723
2019-01-23 14:12:19 +01:00
Marek Bel
1d71c1a5d1
Update IR sensor selftest progress bar more frequently.
2019-01-22 19:02:42 +01:00
Marek Bel
97a4623800
Fix lcd_selftest_screen for small _progress_scale.
2019-01-22 19:01:55 +01:00
Marek Bel
9cda0b69b8
Update IR sensor selftest progress bar.
2019-01-22 18:23:00 +01:00
Marek Bel
3ff8a7c740
Unload filament by MMU unit in selftest_irsensor().
...
Known limitation:
If filament was not loaded to nozzle it is sticked completely out of MMU. To be fixed in MMU, as this problem can be reproduced also from printer menu - unload filament.
2019-01-22 14:54:06 +01:00
Marek Bel
c371a5ea65
Document.
2019-01-22 14:05:08 +01:00
Marek Bel
a92d9c782b
Add IR sensor test.
2019-01-22 11:29:55 +01:00
Marek Bel
f292a6ca7a
Refactor filament sensor selftest call.
2019-01-21 21:39:38 +01:00
Robert Pelnar
50bcfae183
Fast PWM for bed - newer set HEATER_BED_PIN to 1
2019-01-21 18:21:17 +01:00
MRprusa3d
2c0d62fbf7
PID / manage_heater
...
some small corrections
2019-01-21 18:20:40 +01:00
Robert Pelnar
e612eb2a17
Fast PWM for bed - set pwm value from soft_pwm_bed variable.
2019-01-21 18:14:19 +01:00
Robert Pelnar
0963c889f0
Fast PWM for bed - timer2 used as system timer
2019-01-21 17:57:07 +01:00
MRprusa3d
d7ac459da7
PID / manage_heater
...
build-warnings elimination
2019-01-20 01:23:15 +01:00
MRprusa3d
d9f8e4eb9e
PID / manage_heater
...
PSD regulator improvement
2019-01-17 02:57:08 +01:00
PavelSindler
ca8cb3784c
Merge pull request #1456 from mkbel/Fix_load_fail_current
...
Do not disable motor currents when print is paused due to mmu load er…
2019-01-16 12:49:38 +01:00
Marek Bel
3af1f81269
Do not disable motor currents when print is paused due to mmu load error.
2019-01-15 21:40:02 +01:00
Marek Bel
052ae323f8
Merge branch 'MK3' into prusa3d-DEV_MK3
2019-01-15 16:58:36 +01:00
Marek Bel
d09ff5c3e7
Remove commented out code.
2019-01-15 01:30:54 +01:00
Marek Bel
39b391314f
Document meaning of manage_response() move default parameter value.
2019-01-15 01:29:59 +01:00
Marek Bel
3b175459b1
Fix filament loaded to far and MMU idler never disengaged after Tx command on printer with idler sensor.
2019-01-15 01:28:51 +01:00
Marek Bel
2db42c8577
Merge branch 'MK3' into auto_deplete_2
2019-01-07 21:39:46 +01:00
Marek Bel
c080b899c3
Change filament number in T command to alternative if depleted and lcd_autoDepleteEnabled().
2019-01-04 22:32:48 +01:00
PavelSindler
7946cd7250
eeprom write nr. limitation
2019-01-04 22:23:11 +01:00
PavelSindler
02262ff7ca
mmu load fail: possibility to unload/eject filament from menu
2019-01-04 21:37:19 +01:00
Marek Bel
d89c03a0f1
Documentation.
2019-01-04 21:26:13 +01:00
Marek Bel
1a219b2372
Mark filament as depleted when detected by MMUv2 FINDA. Do not try to load filament if it is marked depleted, load next filament instead. Force user action when all filaments are marked as depleted.
2019-01-04 21:11:42 +01:00
PavelSindler
b7b7e9387f
do resend attempts before pausing print (mmu needs attention state) so the print would not be paused if T-code is not received correctly by mmu; prevent infinite loading
2019-01-04 21:07:52 +01:00
Marek Bel
a7128ffa04
Comment.
2019-01-04 19:56:15 +01:00
Marek Bel
92ff284f82
Remove redundant code.
2019-01-04 19:35:33 +01:00
Marek Bel
360a977520
Fix allDepleted(). Add tests.
2019-01-04 19:34:42 +01:00
Marek Bel
a309ec1b0b
Add filament auto deplete engine for multi-material prints with MMUv2.
2019-01-03 22:58:25 +01:00
MRprusa3d
4e300fd552
minTemp
...
safety heaters management during/after minTemp
2019-01-02 18:25:41 +01:00
PavelSindler
3ab1daf722
MMU_DEBUG temporarily enabled
2018-12-21 23:17:32 +01:00
PavelSindler
88441f7f2f
scan power failures fix
2018-12-21 23:07:39 +01:00
PavelSindler
6ba86acebc
send A (abort) command to mmu only when loading phase of T-code
2018-12-21 22:33:01 +01:00
PavelSindler
e36e58f385
show sensor on/off temporarily changed to unlocalized strings
2018-12-21 21:28:57 +01:00
PavelSindler
688d4a8a82
missing defines in variant files
2018-12-21 21:05:54 +01:00
PavelSindler
ba57986b72
merge changes from upstream
2018-12-21 20:58:38 +01:00
PavelSindler
5462d451e1
show power failures in fail stats menu, shorter load to nozzle if idler sensor detected
2018-12-21 20:56:45 +01:00
PavelSindler
d1ca73597b
Merge pull request #1412 from XPila/V3_5
...
Repeat last MMU command after timeout
2018-12-21 20:53:24 +01:00
PavelSindler
d292e877df
load to nozzle shortened, sensor menu moved to support
2018-12-21 18:51:13 +01:00
PavelSindler
3c64bad1cb
initial version which works on old and new hw, initial version of idler sensor detection
2018-12-21 17:12:16 +01:00
PavelSindler
75523b1497
Merge pull request #1417 from PavelSindler/z_cal_endstops
...
version changed
2018-12-19 20:08:22 +01:00
PavelSindler
acbfe89f04
version changed
2018-12-19 20:07:18 +01:00
PavelSindler
b0fce9122e
Merge pull request #1416 from PavelSindler/z_cal_endstops
...
Z cal endstops and stop paused print fix
2018-12-19 19:46:27 +01:00
Robert Pelnar
f79137898a
Fix - move down after calibrate Z (PFW718)
2018-12-19 19:22:03 +01:00
PavelSindler
40fe52202d
stop paused print fix: saved_printing set to false when doing stop print
2018-12-19 19:20:09 +01:00
Robert Pelnar
b8c5b6259e
Fix - move down after calibrate Z (PFW718)
2018-12-19 14:40:10 +01:00
Robert Pelnar
c69d4aa914
Move 1mm down with disabled endstop after calibrate_z_auto (PFW718)
2018-12-19 13:43:49 +01:00
Robert Pelnar
16e5fb50dd
Remove M601 from queue before saving state (prevent infinite loop - PFW713)
2018-12-18 20:39:38 +01:00
Robert Pelnar
34f116b4d9
Move 1mm down with disabled endstop after calibrate_z_auto (PFW718)
2018-12-18 19:57:29 +01:00
PavelSindler
b5430c2968
M600: consume click
2018-12-18 19:10:02 +01:00
Robert Pelnar
75d31fd2cb
Repeat last MMU command after timeout
2018-12-18 18:47:54 +01:00
PavelSindler
880163dbcb
missing prototypes
2018-12-18 17:38:24 +01:00
PavelSindler
fc5d7e35ef
fail stats mmu function definitions
2018-12-18 17:35:41 +01:00
PavelSindler
11ab5dfd36
fail stats menu for mmu defined for MK2.5 version
2018-12-18 17:33:27 +01:00
PavelSindler
4543949cac
build without MMU_IDLER_SENSOR_PIN defined
2018-12-18 17:29:44 +01:00
PavelSindler
fc33affbda
temporary change
2018-12-18 17:24:29 +01:00
PavelSindler
2100376eb1
Merge remote-tracking branch 'upstream/MK3' into idler_sensor
2018-12-18 16:16:48 +01:00
PavelSindler
c782373f2d
comment
2018-12-18 16:09:10 +01:00
PavelSindler
7703125b2e
retry unload movements (T-codes, M702 C) if filament detected by idler sensor, then turn off stepper and wait, MMU_LOAD_TIME prolonged
2018-12-18 16:08:29 +01:00
PavelSindler
27c8612360
use just short movement for unloading filament
2018-12-17 21:25:07 +01:00
PavelSindler
cb1f6d2a0e
show sensor states in calibration menu
2018-12-14 19:43:26 +01:00
Robert Pelnar
927898151a
fix - tmc2130 conditional translation
2018-12-14 15:46:50 +01:00
Robert Pelnar
cfe83daf4a
Meshbed leveling fail - move 1mm outside of colission with disabled endstop
2018-12-14 15:32:47 +01:00
PavelSindler
e0bed71801
comments update
2018-12-13 17:01:45 +01:00
PavelSindler
bbba27c15f
idler state menu
2018-12-13 16:53:59 +01:00
PavelSindler
24ef6deeed
typo fixed
2018-12-13 16:43:40 +01:00
PavelSindler
9c4f086add
fixed statistics for MMU_FAIL
2018-12-13 01:09:21 +01:00
PavelSindler
df71398066
statistics fix
2018-12-13 00:43:27 +01:00
PavelSindler
a9829b6a1a
add statistics and idler sensor state
2018-12-13 00:12:00 +01:00
PavelSindler
665f1d7ffe
pause print after N continue loading attempts and wait for user, then start print and repeat last T-code
2018-12-12 23:36:50 +01:00
PavelSindler
29ecd4ec7a
duplicit T-codes execution improved, E-stepper movements when waiting for ok from mmu, continue loading function improved, eeprom: fail stats for mmu
2018-12-12 22:32:47 +01:00
Marek Bel
3d4cb8a994
Document gcode T.
2018-12-12 20:30:28 +01:00
PavelSindler
c256af0a1c
unknown filament added; the same T-code will be not executed twice in a row; continue loading
2018-12-12 14:50:55 +01:00
PavelSindler
e52e53d1eb
send continue loading commands periodically if initial load fails
2018-12-12 13:54:17 +01:00
PavelSindler
041ed172a0
Merge remote-tracking branch 'robert/MK3' into idler_sensor
2018-12-11 19:16:04 +01:00
PavelSindler
8af127870d
consume click
2018-12-11 15:59:44 +01:00
PavelSindler
6d6de67c3f
consume click
2018-12-07 18:31:30 +01:00
Robert Pelnar
35378769fd
MMU - idler sensor
2018-12-06 19:19:50 +01:00
Robert Pelnar
6157c3ab32
New filament sensor
2018-12-06 15:41:53 +01:00
Robert Pelnar
41b78187ca
LCD backlight - full brightnes at start
2018-12-06 15:27:05 +01:00
Robert Pelnar
cb334238cc
Slow PWM fan @ 62.5Hz
2018-12-06 15:18:07 +01:00
XPila
1948cb6310
Merge pull request #1369 from PavelSindler/M220_MK3
...
M220: possibility to backup/restore speed
2018-11-30 19:02:45 +01:00
PavelSindler
d1d4a8c58c
whitespace
2018-11-29 17:33:36 +01:00
PavelSindler
8e239ce76f
changed M220
2018-11-29 17:02:38 +01:00
PavelSindler
929e1de253
special variable for saving/restoring feedmultiply using M220
2018-11-29 17:02:10 +01:00
PavelSindler
839de141a3
resolving conflicts
2018-11-29 16:26:49 +01:00
PavelSindler
abf20ef6a2
merged changes from public upstream (Prusa-Firmware repository)
2018-11-29 13:46:58 +01:00
MRprusa3d
83a9f75abe
minTemp
...
correct minTemp detection @ MK2.5 & MK3
2018-11-28 23:43:16 +01:00
Marek Bel
38dacaf07a
Automate secondary language support build.
2018-11-26 20:24:24 +01:00
PavelSindler
90876453a7
Merge pull request #1357 from PavelSindler/MK3_for_merging
...
version change
2018-11-22 23:32:37 +01:00
PavelSindler
47d3535012
version change
2018-11-22 23:30:01 +01:00
PavelSindler
c1773c1aa4
Merge pull request #1356 from PavelSindler/MK3_for_merging
...
process serial line during pause
2018-11-22 23:07:07 +01:00
PavelSindler
85b23d1db6
process serial line during pause
2018-11-22 21:41:22 +01:00
PavelSindler
b3ab9d0ee0
Merge pull request #1354 from XPila/V3_5
...
Lang - final corrections
2018-11-22 19:03:30 +01:00
Robert Pelnar
e229f3343e
Lang - text "volume.init failed" removed from dictionary
2018-11-22 18:48:22 +01:00
Robert Pelnar
42f2a61416
Lang - text "TRIGGERED" removed from dictionary
2018-11-22 18:46:02 +01:00
Robert Pelnar
e9131542ca
Lang - text "Sleep..." removed from dictionary
2018-11-22 18:43:21 +01:00
Robert Pelnar
ddf898cb41
Lang - text "SD init fail" removed from dictionary
2018-11-22 18:41:00 +01:00
Robert Pelnar
3384dd8487
Lang - text "SD card ok" removed from dictionary
2018-11-22 18:39:35 +01:00
Robert Pelnar
72c7810641
Lang - text "Resend" removed from dictionary
2018-11-22 18:38:20 +01:00
Robert Pelnar
7426efac9b
Lang - text "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" removed from dictionary
2018-11-22 18:36:38 +01:00
Robert Pelnar
123bef636a
Lang - text "Printer halted. kill() called!" removed from dictionary
2018-11-22 18:33:15 +01:00
Robert Pelnar
123725edd1
Lang - duplicate text "Some problem encountered, Z-levelling enforced ..." removed
2018-11-22 18:30:53 +01:00
Robert Pelnar
0fceade481
Lang - text "PowerUp" removed from dictionary
2018-11-22 18:24:21 +01:00
Robert Pelnar
f0e3021d33
Lang - text "openRoot failed" removed from dictionary
2018-11-22 18:20:24 +01:00
Robert Pelnar
1cbb261707
Lang - text "open" removed from dictionary
2018-11-22 18:18:25 +01:00
Robert Pelnar
f4bbce4142
Lang - text "open failed, File: " removed from dictionary
2018-11-22 18:15:22 +01:00
Robert Pelnar
72d47eaeba
Lang - text "ok" removed from dictionary
2018-11-22 18:12:19 +01:00
Robert Pelnar
1568b94e87
Lang - text "No Checksum with line number, Last Line: " removed from dictionary
2018-11-22 18:09:07 +01:00
Robert Pelnar
fd3cd9b551
Lang - texts "Mxxx Invalid extruder " removed from dictionary
2018-11-22 18:06:10 +01:00
Robert Pelnar
fdf9734161
Lang - text "checksum mismatch, Last Line: " removed from dictionary
2018-11-22 17:59:43 +01:00
Robert Pelnar
9c964277ac
Lang - text "error writing to file" removed from dictionary
2018-11-22 17:57:52 +01:00
Robert Pelnar
9f86a334c6
Lang - text "endstops hit: " removed from dictionary
2018-11-22 17:53:51 +01:00
Robert Pelnar
0baa6412fc
Lang - text "Cannot enter subdir: " removed from dictionary
2018-11-22 17:49:28 +01:00
Robert Pelnar
60e567b660
Lang - text " Last Updated: " removed from dictionary
2018-11-22 17:48:12 +01:00
Robert Pelnar
a1f03e9531
Lang - text " Free Memory: " removed from dictionary
2018-11-22 17:46:44 +01:00
Robert Pelnar
283e33dd69
Lang - text " cold extrusion prevented" removed from dictionary
2018-11-22 17:44:53 +01:00
Robert Pelnar
104353c0c5
Lang - text " PlannerBufferBytes: " removed from dictionary
2018-11-22 17:43:11 +01:00
Robert Pelnar
46fba48173
Lang - text "enqueing \"" removed from dictionary
2018-11-22 17:38:52 +01:00
Robert Pelnar
0ceeba38cb
Lang - text "Copy selected language from XFLASH?" shorted to "Copy selected language?"
2018-11-22 17:32:53 +01:00
Robert Pelnar
099fe216b6
Lang - text "KILLED. " removed from dictionaries
2018-11-22 17:26:01 +01:00
Robert Pelnar
37273d9fca
Lang - 'Auto Deplete' changed to 'SpoolJoin'
2018-11-22 17:19:38 +01:00
PavelSindler
49367c0b09
Merge pull request #1353 from XPila/V3_5
...
Lang - french translation
2018-11-22 17:18:42 +01:00
Robert Pelnar
f0624a9e97
Lang - some not localized texts marked as localized, formating fixed
2018-11-22 14:37:29 +01:00
XPila
3d76081c79
Merge pull request #1351 from PavelSindler/MK3_for_merging
...
mmu: FINDA disabled by damaged/disconnected PAT9125 hotfix
2018-11-21 20:03:07 +01:00
PavelSindler
0e65790218
removed redundant code
2018-11-21 19:49:19 +01:00
PavelSindler
74a7341005
mmu: FINDA disabled by damaged/disconnected PAT9125 hotfix
2018-11-21 19:27:55 +01:00
PavelSindler
9fa587b206
Merge pull request #1350 from XPila/V3_5
...
V 3.5 - new translation
2018-11-21 15:23:41 +01:00
Robert Pelnar
2dc5439069
Lang - reserved space increased to 0x2f00 (12032 bytes)
2018-11-21 14:57:20 +01:00
Robert Pelnar
1bff138b50
Lang - sec.lang. reserved space increased to 0x2e00 (11776 bytes)
2018-11-21 14:52:14 +01:00
PavelSindler
18eb9ad69e
Merge pull request #1344 from PavelSindler/progress_bar_fix
...
progress bar fix
2018-11-20 14:50:04 +01:00
Marek Bel
ab5b57df11
Style.
2018-11-19 20:41:14 +01:00
PavelSindler
cb7c701791
whitespace
2018-11-19 20:09:03 +01:00
PavelSindler
7d538cde6c
Retrieve settings (M501): initialize each item in feedrate and acceleration arrays separately
2018-11-19 20:05:58 +01:00
PavelSindler
e5dd4d757a
progress bar fix
2018-11-16 15:45:55 +01:00
MRprusa3d
ffe906c733
MeshBed Levelling Fail V
2018-11-14 16:45:49 +01:00
PavelSindler
0398c3c26b
Merge pull request #1335 from PavelSindler/T_codes
...
version change
2018-11-13 17:49:26 +01:00
PavelSindler
51c80352e8
version change
2018-11-13 17:48:42 +01:00
PavelSindler
51b4858a87
Merge pull request #1334 from XPila/V3_5
...
PFW658 - disable extruder motor while changing filament with mmu2 (pr…
2018-11-13 16:10:24 +01:00
XPila
c41b045ea7
Merge pull request #1333 from PavelSindler/T_codes
...
T-code fix
2018-11-13 16:09:52 +01:00
Robert Pelnar
bfc343c7c5
PFW658 - disable extruder motor while changing filament with mmu2 (prevents extruder motor overheating)
2018-11-13 16:04:46 +01:00
PavelSindler
15d0b083ed
whitespace
2018-11-13 15:58:21 +01:00
PavelSindler
17a1049f23
T-codes fix
2018-11-13 15:56:19 +01:00
PavelSindler
f297e72864
Merge pull request #1332 from XPila/V3_5
...
Fix PFW657 - filament runout detection is not working after autoload …
2018-11-13 14:10:11 +01:00
Robert Pelnar
d886ba1100
Fix PFW657 - filament runout detection is not working after autoload disabled from menu.
2018-11-13 14:05:15 +01:00
XPila
3d97d81734
Merge pull request #1329 from PavelSindler/M600_load_fil_message
...
M600 filament load progress bar changes
2018-11-12 20:52:06 +01:00
PavelSindler
27db32cbd0
Merge pull request #1331 from XPila/V3_5
...
M907 fix - value in mA (PFW655)
2018-11-12 20:49:09 +01:00
Robert Pelnar
41b885c537
M907 fix - value in mA (PFW)
2018-11-12 20:39:25 +01:00
MRprusa3d
5e8e96b5d7
MMU module adjustment
...
MMU module conditional compilation adjustment for MMU v1
2018-11-12 20:09:54 +01:00
PavelSindler
32da5bc039
progress bar time counted from feedrate and E - distance
2018-11-12 19:55:53 +01:00
PavelSindler
f4c1e7924f
M600: show progress bar during first filament load
2018-11-12 18:35:06 +01:00
PavelSindler
10a81ea768
version change
2018-11-09 19:16:53 +01:00
PavelSindler
5931d15566
whitespace
2018-11-09 18:31:28 +01:00
PavelSindler
c991c8b314
resume print fix: wait for heater() never disable steppers
2018-11-09 18:29:35 +01:00
XPila
10b79e918b
Merge pull request #1321 from PavelSindler/M600_load_fix
...
M600 load messages synchronization fixed
2018-11-09 15:40:00 +01:00
PavelSindler
22cf2c6b6b
M600 load messages synchronization fixed
2018-11-09 15:31:44 +01:00
PavelSindler
7022373885
Merge pull request #1320 from XPila/V3_5
...
localization - lang-export.sh + po files + tmc2130_print_currents fixed (M913)
2018-11-09 15:27:43 +01:00
Robert Pelnar
3afebcc9cc
tmc2130_print_currents fixed (for obsolete M913)
2018-11-09 15:20:25 +01:00
PavelSindler
5f166374ab
Merge pull request #1319 from XPila/V3_5
...
Fix PFW651 - cannot upload MK3 languages with slic3r (firmware compil…
2018-11-09 13:10:51 +01:00
Robert Pelnar
6c13225f49
Fix PFW651 - cannot upload MK3 languages with slic3r (firmware compiled on linux arduino 1.8.5 + lto)
2018-11-09 10:45:16 +01:00
PavelSindler
0e7fb26dc5
Merge pull request #1316 from MRprusa3d/PFW-635
...
MeshBed Levelling Fail IV
2018-11-08 10:18:08 +01:00
PavelSindler
6d59f88a8e
Merge pull request #1315 from MRprusa3d/PFW-639
...
Bed PowerMonitor III
2018-11-08 10:08:31 +01:00
MRprusa3d
ccb58ae7c9
Revert "MeshBed Levelling Fail IV"
...
This reverts commit bd554df02e
2018-11-08 04:02:32 +01:00
MRprusa3d
bd554df02e
MeshBed Levelling Fail IV
2018-11-08 03:54:05 +01:00
MRprusa3d
fd45dd64dc
Bed PowerMonitor III
2018-11-08 03:32:00 +01:00
PavelSindler
3cccb125f7
Merge pull request #1313 from MRprusa3d/PFW-639
...
Bed PowerMonitor II
2018-11-07 13:50:50 +01:00
MRprusa3d
4ae857136d
Bed PowerMonitor II
2018-11-07 13:38:39 +01:00
PavelSindler
b80a0edac0
Merge pull request #1312 from mkbel/fix_long_press_modal
...
Fix long press modal
2018-11-07 10:28:24 +01:00
PavelSindler
a5bbc75035
Merge pull request #1309 from mkbel/fix_1st_lay_cal
...
PFW-634 Move T<nr> code just before extrude code to properly load fil…
2018-11-07 10:28:13 +01:00
Marek Bel
b4d4bfa667
Do not declare extern class in .cpp file, include appropriate header.
2018-11-06 20:54:53 +01:00
Marek Bel
95b0506284
Make lcd_long_press_active private.
2018-11-06 20:48:28 +01:00
Marek Bel
676434111e
Disable long press handler in modal dialogs (LCD update disabled).
2018-11-06 20:43:19 +01:00
Marek Bel
02e31433f4
PFW-634 Move T<nr> code just before extrude code to properly load filament in first layer calibration with MMUv2.
2018-11-06 15:46:37 +01:00
Robert Pelnar
9a68501039
MK2 variants compilable
2018-11-06 14:17:43 +01:00
PavelSindler
c3bdd21fa5
Merge pull request #1308 from MRprusa3d/PFW-635
...
MeshBed Leveling Fail II
2018-11-06 10:47:03 +01:00
MRprusa3d
46b2c93d60
MeshBed Leveling Fail III
2018-11-06 01:44:53 +01:00
MRprusa3d
9953518681
MeshBed Leveling Fail II
2018-11-06 01:28:47 +01:00
PavelSindler
908fffc19a
Merge pull request #1306 from PavelSindler/fsensor_q
...
filament quality measurements disabled
2018-11-05 19:14:34 +01:00
PavelSindler
0a6ca7ffd0
Merge pull request #1305 from XPila/V3_5
...
PFW643 - removed M910-M918, implemented M907
2018-11-05 19:14:19 +01:00
PavelSindler
89ad02ac8c
filament quality measurements disabled
2018-11-05 18:37:36 +01:00
Marek Bel
50f9bf06be
Save 74B of flash memory.
2018-11-05 18:02:46 +01:00
Marek Bel
e95c2ad592
Display auto deplete as not available if filament sensor is disabled.
2018-11-05 17:43:07 +01:00
Robert Pelnar
d6b5f5a1c7
PFW643 - removed M910-M918, implemented M907
2018-11-05 16:15:27 +01:00
Marek Bel
ef5be690fb
Add autodeplete setting into tune menu.
2018-11-05 13:54:22 +01:00
PavelSindler
7e43b15b54
Merge pull request #1303 from PavelSindler/m600_idler
...
M600: move extruder to the left to make space for idler opening
2018-11-05 10:38:51 +01:00
PavelSindler
78775e2f87
Merge pull request #1302 from PavelSindler/wizard_improvements
...
Wizard improvements
2018-11-05 10:38:41 +01:00
PavelSindler
688c10247e
Merge pull request #1291 from XPila/MK3-new_bs
...
lang update
2018-11-05 10:38:29 +01:00
PavelSindler
0a2ad97bc6
Merge pull request #1290 from PavelSindler/mmu_improvements
...
mmu improvements: load to nozzle, gcodes for single material mode, M600 fix
2018-11-05 10:38:05 +01:00
PavelSindler
2619c6f7a1
Merge pull request #1283 from PavelSindler/crashdet_cancel
...
canceling print after crash detection sets saved_priting flag to false
2018-11-05 10:37:51 +01:00
PavelSindler
aeeb2af0a4
whitespace
2018-11-05 00:15:36 +01:00
PavelSindler
b058ec7120
whitespace
2018-11-05 00:14:16 +01:00
PavelSindler
934b76ade3
wait message added
2018-11-05 00:12:46 +01:00
PavelSindler
3d24f5437c
leave Z move menu (hotfix)
2018-11-04 23:44:29 +01:00
