3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,587 Commits 3 Branches 78 Tags 40 MiB
d78636c308
Commit Graph

2782 Commits

Author SHA1 Message Date
Marek Bel
32f435d1a0 Increase number of configurable steel sheets to 8. Move sheets into sub menu of HW setup. 2019-08-29 17:21:08 +02:00
leptun
7f51e0bad8 Move SpoolJoin and Cutter to MSGs 2019-08-29 17:35:26 +03:00
Marek Běl
3413d5d486
Merge pull request #2139 from DRracer/assist-mode-fixes 
Fix sound mode [assist]: encoder clicking indefinitely when MMU wants to
 2019-08-29 15:55:49 +02:00
Marek Běl
fec92b33ae
Merge pull request #2137 from DRracer/illegal-fat-characters-revised 
Support for more special characters allowed in file names (^ + = [ ] ;
 2019-08-29 15:55:36 +02:00
leptun
0b21acec46 Minor fix to Toggle Cutter 2019-08-29 15:49:26 +03:00
leptun
d0f9f10ed6 Toggle Cutter 2019-08-29 15:43:41 +03:00
leptun
1937cf2074 Toggle SpoolJoin 2019-08-29 15:40:04 +03:00
leptun
5eea8d26fe Merge branch 'MK3' into MK3_Translations 2019-08-29 12:08:48 +03:00
Marek Bel
f3bb72be64 Reset calibration status if there is no calibrated sheet after reset. 2019-08-29 03:33:33 +02:00
Marek Bel
f64252b59b Hide sheet switcher from main menu, if there are less than 2 sheets calibrated. 2019-08-28 19:08:53 +02:00
Marek Bel
9692f94683 Move sheet menu up to be after Print from SD. 2019-08-28 19:01:48 +02:00
Marek Bel
3903dc819a Extract function next_initialized_sheet from change_sheet_from_menu(). Make it more general to depend on sizeof(Sheets::s) instead of hard coded value of 2. 2019-08-28 18:59:48 +02:00
Marek Bel
33675c6d1e Change default sheet names. 2019-08-28 18:16:35 +02:00
Marek Bel
49bc11037c Remove statements with no effect. 2019-08-28 18:14:10 +02:00
DRracer
1d23cc52e9 endstop sound alert fixes 2019-08-28 09:39:28 +02:00
Marek Bel
29c8cb2927 Fix bad merge. 2019-08-27 22:22:36 +02:00
Marek Běl
3f04c4db87
Merge branch 'MK3' into preheat_menu 2019-08-27 22:20:23 +02:00
Marek Bel
07169ad84a Make file local variable static. 2019-08-27 20:48:53 +02:00
Marek Bel
e57fcc04a7 Fix compiler warnings. 2019-08-27 20:23:48 +02:00
Marek Bel
d927d5b05d Port wizard_active to mFilamentItem(). 2019-08-27 20:19:03 +02:00
Marek Bel
cef7f31b9f Set FilamentAction to None if mFilamentMenu left by cooldown or menu back action. 2019-08-27 20:13:55 +02:00
Marek Bel
ffc5a64154 Remove commented out code. 2019-08-27 20:06:48 +02:00
Marek Bel
269aef1696 Remove unused code guarded by WATCH_TEMP_PERIOD macro as most of the functionality is duplicate to what is implemented in temp_runaway_check(). This will release us from porting setWatch() to unified preheat menu and maintaining it. 2019-08-27 20:05:10 +02:00
DRracer
1a1be5c518 Fix sound mode [assist]: encoder clicking indefinitely when MMU wants to 
select filament
 2019-08-27 17:10:29 +02:00
Marek Bel
bf2097342d Add ASA preheat into mFilamentMenu(); 2019-08-27 17:01:41 +02:00
DRracer
11ce786aaa Support for more special characters allowed in file names (^ + = [ ] ; 
,)
 2019-08-27 13:47:58 +02:00
DRracer
6aaa40b9a3
Merge pull request #2134 from mkbel/fix_power_panic 
Fix repeated power panic restarted print from beginning or jumped at …
 2019-08-27 08:13:26 +02:00
DRracer
a1e68c3d7f
Merge pull request #2135 from prusa3d/MK3_3.8.0 
Increase version to 3.8.0-RC2 and build number to 2639.
 2019-08-27 08:12:27 +02:00
Marek Bel
3da43ae8c2 Do not port print fan preheat speed preset, as it was never used. And it was broken until recently fixed when adding ASA profile. 2019-08-26 21:14:07 +02:00
Marek Bel
4792559536 Add farm preheat items. Add setWatch() call. 2019-08-26 21:00:30 +02:00
Marek Bel
aa13f9e809 Fix formatting. 2019-08-26 20:19:34 +02:00
Marek Bel
668e89e5a9 Preheat menu: Add ASA, hide menu item back when in wizard. 2019-08-26 20:18:34 +02:00
Marek Bel
52ae62bbba Fix formatting. 2019-08-26 20:14:00 +02:00
Marek Bel
3628d893ee Remove duplicate preheat menu. 
Known limitations: farm_mode missing, wizard_active missing, cooldown missing, ASA missing, print fan missing.
 2019-08-26 20:11:52 +02:00
Marek Bel
b9b0d6049e Fix formatting. 2019-08-26 19:48:39 +02:00
Marek Bel
159a1a70d8 Update documentation. 2019-08-26 17:19:57 +02:00
Marek Bel
c27fcf9cff Increase version to 3.8.0-RC2 and build number to 2639. 2019-08-26 17:03:18 +02:00
Marek Bel
52cb37770b Fix repeated power panic restarted print from beginning or jumped at most 65536 B back in file printed from SD card. 
As sdpos_atomic was not updated after printer power up and first power panic recovery, it was equal 0. When the first command from SD card was queued its size on SD card was computed as current SD index position minus sdpos_atomic. This was equal to offset from beginning of the file limited to 16 bit storage type. When next power outage occurred earlier then this command was finished and wiped out of queue, this command size (extraordinarily big) was subtracted from sdpos_atomic and saved to EEPROM. This led to up to 65536 B jump back in file printed after next power panic recovery.
 2019-08-23 19:30:20 +02:00
Marek Bel
3eb36ca194 Fix cmdqueue_dump_to_serial. 
Header was historically made bigger to contain size of the command on SD card, but those debug functions wasn't updated.
 2019-08-23 16:48:30 +02:00
XPila
5bb510dd2a
Merge pull request #2129 from DRracer/bed-noise-performance 
Improve performance of bed PWM automaton
 2019-08-22 14:45:01 +02:00
DRracer
c6df3fe012
Merge pull request #2127 from DRracer/code-size-reduction-1 
Code size reduced by almost 5KB
 2019-08-22 14:25:23 +02:00
3d-gussner
d3123a74b0 Updated LCD menu documentation to new form/syntax 2019-08-22 04:58:16 +02:00
3d-gussner
514b062107
Added lcd_menu format description 
Added some documentation how the LCD menus look like and added max character values for translations.

There are more things needed and also the placement in the code is an open task. Depending on the decision if we use `messages.c/h`
 2019-08-21 10:28:28 +02:00
DRracer
a7c2aec04c Code size reduced by almost 5KB 2019-08-21 09:59:51 +02:00
Marek Bel
3ed6d0637c Re-enable tmc2130_sg_stop_on_crash only if crash detection enabled from menu. 
This fixes bug, that disabling crash detection from menu doesn't work during recovery from crash detection.
 2019-08-20 19:32:39 +02:00
Marek Bel
f204cdea81 Refactor 
Remove variable CrashDetectMenu. Read this state from EEPROM_CRASH_DET instead in bool lcd_crash_detect_enabled().
Rename crashdet_enable() to lcd_crash_detect_enable() and move it to ultralcd.cpp.
Rename crashdet_disable() to lcd_crash_detect_disable() and move it to ultralcd.cpp.
Rename lcd_crash_mode_set() to crash_mode_switch().
Remove forward function declarations from *.cpp file.

Saves 34B of FLASH and 2B of RAM.
 2019-08-20 17:22:27 +02:00
DRracer
f07635d08a
Merge pull request #2116 from mkbel/fix_mmu_lay1cal 
Fix mmu lay1cal
 2019-08-19 19:07:10 +02:00
Marek Bel
f0642f88f1 Fix power panic broken when PSU_Delta defined. 
Remove disable_z() call from uvlo_() and uvlo_tiny() power panic interrupt handlers. As historically this function was empty. And in case PSU_Delta macro defined it switches Z trinamic to silent mode, which could take some time and is not needed. Remove alignment to to full step from disable_force_z(), as it is not needed when switching to silent mode.
 2019-08-19 17:37:23 +02:00
leptun
0d22f8039e Toggle FSENSOR and FSENSOR_AUTOLOAD 2019-08-19 11:58:16 +03:00
leptun
6e9c44af2d Fix warning 2019-08-19 11:07:11 +03:00
leptun
5a3f14b752 "N/A" toggle support and format update 2019-08-19 10:20:17 +03:00
Marek Bel
170c1ea866 Split first layer calibration load filament and intro line into separate steps. If load fails, pause print apparently flushes command buffer and intro line is not printed after issue is resolved. 2019-08-16 20:47:55 +02:00
Marek Bel
e53734895f Make MMU load failed blocking to workaround lack of resume print menu item. 
The same workaround used as for USB print (Octoprint).
 2019-08-16 20:20:17 +02:00
Marek Bel
1036c4f755 Do not precede first layer calibration without filament if print is paused due to MMU load failed. 2019-08-16 19:00:45 +02:00
Marek Bel
b10bd8340a Make local functions static. 2019-08-15 17:57:30 +02:00
Marek Bel
0b798767af Fix preheat ASA. 2019-08-15 17:54:23 +02:00
Marek Bel
a6f955b62d Use unused macros *_PREHEAT_FAN_SPEED. 2019-08-15 17:47:34 +02:00
Marek Bel
eb68bb9b43 Add ASA preheat. 2019-08-15 17:46:29 +02:00
Marek Bel
36a69281ee Remove unused functions forward declarations. 2019-08-15 17:36:05 +02:00
DRracer
0e4e644476
Merge branch 'MK3' into MK3_3.8.0 2019-08-15 10:34:50 +02:00
DRracer
ba81149afe
Merge branch 'MK3' into MK3_3.7.3 2019-08-15 10:25:51 +02:00
DRracer
dc78bc7362 Improve performance of bed PWM automaton - proof of concept 
There are still some artefacts on the output pin - work in progress.
 2019-08-14 17:53:08 +02:00
rhounsell
32fa8caab8 reinitialize the timestamp to ensure enough time to receive response for 0xFF sent. 2019-08-11 17:57:41 -04:00
leptun
596ffe1dc2 Actual fix to the missing first two characters 2019-08-10 21:03:45 +03:00
leptun
7ce2fedac7 Fix missing first two characters in multi-lang mode 2019-08-10 09:16:23 +03:00
leptun
29dcb1cad3 Toggle FANS_CHECK 2019-08-10 08:43:07 +03:00
leptun
505deb28fd Toggle menu item 2019-08-10 08:42:33 +03:00
Paul Bransford
720ea49fa3 Merge branch 'MK3' into MK3-fix-sdcard-sorting 2019-08-08 19:48:50 -04:00
rhounsell
4e58a112e8 Fix for Toshiba FlashAir (or other) SD card initialization - add clock cycles between sending CMD0 and CMD8. Redone for MK3 branch) 2019-08-08 15:45:59 -04:00
DRracer
2ddbd606f2 Version changed (3.8.0 build 2608) 2019-08-08 16:44:16 +02:00
DRracer
84cf1b83c3
Merge pull request #2083 from DRracer/viper 
Workaround for the "viper" situation bug.
 2019-08-07 17:48:57 +02:00
DRracer
a28c365bb1
Merge pull request #2075 from MRprusa3d/PFW-873b 
farm mode update, documentation correction
 2019-08-07 17:48:30 +02:00
DRracer
d9dec38815 Workaround for the "viper" situation bug. 2019-08-07 17:23:19 +02:00
Robert Pelnar
7da2ee5fc3 Version changed (3.7.3 build 2370) 2019-08-06 15:37:23 +02:00
Yuri D'Elia
33037d369c Prevent LCD long-press re-entry (fixes #1196) 2019-08-05 19:00:29 +02:00
MRprusa3d
b471bb7540 farm mode update, documentation correction 2019-08-05 17:51:26 +02:00
DRracer
5cb86a7e8f
Merge pull request #2074 from kuhnmarek/MK3_PFW-967_filament_sensor_check 
Fw version check disabled in farm mode
 2019-08-05 17:41:16 +02:00
Marek Kühn
091cd49ca5 Fw version check disabled in farm mode 2019-08-05 16:59:09 +02:00
DRracer
9f8590c572
Merge pull request #2072 from kuhnmarek/MK3_PFW-961_blind_sound 
changed blind sound
 2019-08-05 12:47:31 +02:00
Marek Kühn
f77414be2b blind alert sound shorter 2019-08-05 12:41:27 +02:00
Marek Kühn
f1a947af2c Whole hw settings hidden in farm mode 2019-08-05 10:40:21 +02:00
DRracer
cb19f0958b Use _delay() and _micros() for future compatibility 2019-08-05 09:51:06 +02:00
Yuri D'Elia
7cae064611 Update EEPROM_LAST_ITEM 2019-08-04 18:39:28 +02:00
Yuri D'Elia
18b8dc89e5 Merge remote-tracking branch 'upstream/MK3' into MK3_LA15 2019-08-04 17:06:34 +02:00
Yuri D'Elia
1435e4a68d Use the computed direction in fsensor_st_block_begin 2019-08-04 16:53:48 +02:00
Marek Kühn
5f14e9c2e5 Removed sheet setting when in farm mode 2019-08-03 17:35:39 +02:00
Marek Kühn
15a095ea76 changed blind sound 2019-08-03 15:37:11 +02:00
DRracer
7c9d3dd177 Update doxydoc of new G-codes 2019-08-01 13:09:20 +02:00
DRracer
9214e30f74
Merge pull request #2062 from MRprusa3d/PFW-873 
UI update
 2019-08-01 07:20:09 +02:00
MRprusa3d
2cb977e4a0 UI update 2019-07-31 20:39:57 +02:00
DRracer
e43e89421c
Merge pull request #2056 from BoCoKeith/patch-1 
Correct bug in util.cpp is_whitespace_or_nl function.
 2019-07-31 17:00:49 +02:00
Simon Benoit
49d2866b48 Add threshold distance to Z calibration 
Add missing if statement
 2019-07-30 19:43:07 -04:00
Marek Bel
bca0fd81eb Fix loading filament 255 instead of 0 in first layer calibration wizard. 2019-07-30 19:15:33 +02:00
Marek Bel
0aed59c947 Fix unsigned char overflow cause invalid filament load. 2019-07-30 19:06:57 +02:00
leptun
5fdaead663 Fix language related warnings in LANG_MODE 0 2019-07-29 15:55:42 +03:00
leptun
556b87edec M350 for all axis - MK3 2019-07-29 09:41:33 +03:00
Keith Spitz
952a24b45d
Update util.cpp 
Correct "is_whitespace_or_nl": change 'r' to '\r'.
 2019-07-28 19:40:18 -06:00
leptun
3ddb853bbd Fix shifted languages. Use \n and \x0a 2019-07-26 18:53:08 +03:00
DRracer
0687b8e4a2
Merge pull request #2044 from mkbel/fix_missing_mmu_attention 
Fix missing mmu attention
 2019-07-26 09:07:06 +02:00
Marek Bel
3b396fb8bf Merge branch 'MK3' into fix_missing_mmu_attention 2019-07-25 19:10:07 +02:00
Marek Bel
a9e9a9857b Fix "MMU needs attention screen is missing in case of failed unload filament". 2019-07-25 19:09:52 +02:00
DRracer
3438c0e411
Merge pull request #2042 from NotaRobotexe/octoprint_bugs 
fixed redundant OK messages in serial
 2019-07-25 12:41:43 +02:00
DRracer
2820baf016
Merge pull request #2040 from NotaRobotexe/MK3 
multiple sheets - menu switching bug
 2019-07-25 09:56:07 +02:00
NotaRobotexe
64115fb146 fixed redundant OK messages in serial 2019-07-24 18:08:14 +02:00
NotaRobotexe
5021fadd5d multiple sheets - menu switching bug 2019-07-24 11:20:27 +02:00
DRracer
33195baf9d
Merge pull request #2035 from mkbel/enable_lin_corr 
Re-enable linearity correction for MK3.
 2019-07-24 09:08:43 +02:00
NotaRobotexe
851aaac053 Merge branch 'MK3' of https://github.com/NotaRobotexe/Prusa-Firmware into MK3 2019-07-23 19:29:36 +02:00
NotaRobotexe
fb35009628 multiple sheets,fix of bug in switching sheets from menu 2019-07-23 19:25:59 +02:00
Marek Bel
f9e32c4bf4 Re-enable linearity correction for MK3. 2019-07-23 19:22:54 +02:00
DRracer
3e60cf4537 enable only for MK3S (out of FLASH on the MK3) 2019-07-23 16:51:02 +02:00
DRracer
593675c667 delay, micros for the 3.7.x branch 2019-07-23 16:40:21 +02:00
DRracer
6860a572c2 detection of faulty RAMBo (incorrect capacitor on fan tach pin) for MK3/S 2019-07-23 15:55:53 +02:00
NotaRobotexe
c4d5e332c8
Merge branch 'MK3' into MK3 2019-07-23 11:34:42 +02:00
NotaRobotexe
b9f622f8a6 variables to PROGMEM, text formating 2019-07-23 11:31:20 +02:00
NotaRobotexe
b5129ff2ec Revert "force push" 
This reverts commit 19e7838c20.
 2019-07-23 11:12:53 +02:00
NotaRobotexe
19e7838c20 add default names to PROGMEM, text formating edit 2019-07-22 20:35:10 +02:00
NotaRobotexe
ab2eafe175 sheet menu, add hw setting, sheet change in menu, sheet name initialization in eeprom 2019-07-22 18:43:43 +02:00
DRracer
6f79ef4c9c resolve hidden conflicts in commented code 2019-07-22 17:29:43 +02:00
DRracer
65087b89ee Merge remote-tracking branch 'upstream/MK3' into code_size_optimization 
and resolve conflicts (ultralcd.cpp)
 2019-07-22 17:26:14 +02:00
DRracer
b96c9700ce fix prusa_statistics code size optimization according to unit test 
results
 2019-07-22 17:10:04 +02:00
DRracer
79c326cdaa
Merge pull request #2022 from kuhnmarek/gcodes_doxygen 
Updated doxygen docs to work better with confluence.
 2019-07-22 12:52:27 +02:00
NotaRobotexe
9c95f8c015 sheet menu 2019-07-19 18:34:46 +02:00
Marek Kühn
bd4bfbe586 Added M862 details 2019-07-19 16:15:12 +02:00
Marek Kühn
94e79806bc Updated doxygen docs to work better with confluence. 2019-07-19 13:51:55 +02:00
Marek Kühn
03e80ce4a8 PFW-917 Adjust Z value persists across update to v3.8 2019-07-18 16:50:44 +02:00
DRracer
b0c41ec979
Merge pull request #2017 from NotaRobotexe/octoprint_fix 
Octoprint fix
 2019-07-18 16:02:38 +02:00
DRracer
14b39b0094
Merge pull request #2019 from leptun/MK3_fix_LCD_WDT_RESET 
Fix lcd not initing after WDT reset
 2019-07-18 13:27:32 +02:00
leptun
121e60655a Fix lcd not initing after WDT reset 2019-07-18 11:50:18 +03:00
DRracer
1ae072c332
Merge pull request #2014 from NotaRobotexe/sound_fix 
crash and filament unload sound change
 2019-07-18 09:41:05 +02:00
DRracer
090ea3145d
Merge pull request #2015 from NotaRobotexe/text_edits 
small text edit
 2019-07-18 09:39:28 +02:00
NotaRobotexe
756ce51b5e
Merge branch 'MK3' into octoprint_fix 2019-07-17 20:06:06 +02:00
NotaRobotexe
b8fec59f21 octoprint fan error fix 2019-07-17 19:59:31 +02:00
NotaRobotexe
2bae208133
Merge pull request #2011 from MRprusa3d/PFW-873 
GUI updates
 2019-07-17 14:49:07 +02:00
NotaRobotexe
1c44eddf81 crash and filament unload sound change 2019-07-17 12:32:27 +02:00
DRracer
255db28684 merge unit test and upstream changes 2019-07-17 10:30:49 +02:00
DRracer
eb705b6b17
Merge pull request #2012 from leptun/MK3_LCD_improvements 
LCD fix status screen lcd_putchar
 2019-07-17 08:05:56 +02:00
Yuri D'Elia
3a87ff56f6 Default to "Move Z" above a certain height even when printing 
This speeds-up the ability to manually get the carriage out of the way
just after a print has finished
 2019-07-16 22:04:32 +02:00
leptun
d8ecb2d0c9 Fix status screen 2019-07-16 21:11:27 +03:00
MRprusa3d
034cbff10a GUI updates 2019-07-16 20:10:49 +02:00
Marek Bel
0c660a6fb1 Revert "Fix sketch/lcd.cpp:196:1: warning: no return statement in function returning non-void [-Wreturn-type]." 
This reverts commit a54fd29fa4.
 2019-07-16 21:10:11 +03:00
NotaRobotexe
e6255e8451 octoprint fan error work 2019-07-16 19:18:31 +02:00
DRracer
1dab0f7a04
Merge pull request #2008 from leptun/MK3_LCD_improvements 
Lcd optimization - 1K of flash saved
 2019-07-16 19:15:57 +02:00
Marek Bel
a54fd29fa4 Fix sketch/lcd.cpp:196:1: warning: no return statement in function returning non-void [-Wreturn-type]. 2019-07-16 20:02:01 +03:00
Marek Bel
fecccf50e5 Remove duplicate prototypes from ultralcd.h. Make functions unreferenced outside lcd.cpp static. Disable unused functions by preprocessor to suppress warnings. 2019-07-16 20:01:49 +03:00
Marek Bel
3e292fd6b0 Fix compiler warnings: 
sketch/Marlin.h:178:17: warning: extra tokens at end of #undef directive
sketch/Marlin.h:181:24: warning: extra tokens at end of #undef directive
sketch/Marlin.h:182:0: warning: "enable_z" redefined
 2019-07-16 18:16:28 +02:00
Marek Bel
cee875fc6a Fix compiler warnings: 
warning: enumeration value '_None' not handled in switch [-Wswitch]
warning: enumeration value '_Undef' not handled in switch [-Wswitch]
 2019-07-16 17:40:28 +02:00
Marek Bel
6b8a5bc3ac Fix compiler warnings 
sketch/tmc2130.cpp:146:42: warning: default argument given for parameter 1 of 'void tmc2130_init(bool)' [-fpermissive]
sketch/tmc2130.cpp:146:24: warning: unused parameter 'bSupressFlag' [-Wunused-parameter]
 2019-07-16 17:31:56 +02:00
DRracer
8b806f692e
Merge pull request #1664 from MRprusa3d/PFW-811 
"disable_z()" for Delta PSU
 2019-07-16 16:46:34 +02:00
DRracer
d65b333664
Merge pull request #2003 from mkbel/heat_hysteresis 
Heat hysteresis
 2019-07-16 13:10:47 +02:00
DRracer
0422713b29
Merge pull request #2005 from prusa3d/MK3_3.7.2 
Mk3 3.7.2
 2019-07-16 08:50:38 +02:00
leptun
8b1c687629 Lcd optimization - 1K of flash saved 2019-07-15 20:32:58 +03:00
Marek Bel
f0727214ed Document 2019-07-15 19:15:15 +02:00
Marek Bel
9083d151b2 wait_for_heater() in restore_print_from_ram_and_continue() only if saved_extruder_temperature differs from target hot-end temperature. 
This fixes problem, that restore_print_from_ram_and_continue() blocked for heating for at least TEMP_RESIDENCY_TIME (3 seconds) even if temperature was resumed by M600 command.
 2019-07-15 18:07:05 +02:00
Marek Bel
ab4e789688 Partially revert "aeed49a Fix filament runout on optical filament sensors" 
Revert plan move to filament change position before enqued M600.
This was workaround to problem that restore_print_from_ram_and_continue() did 3s heating pause before resuming print. This problem will be fixed properly in restore_print_from_ram_and_continue() in next commit.

Save 166B of FLASH.
 2019-07-15 17:22:39 +02:00
Marek Bel
549a8a1a6b Restore print fan speed earlier then nozzle temperature. 
Avoids nozzle temperature dip when fan is turned on.
 2019-07-15 16:25:21 +02:00
NotaRobotexe
8fb30f886a octoprint stop fix 2019-07-15 14:30:21 +02:00
NotaRobotexe
759d9f5a2e small text edits 2019-07-15 11:41:16 +02:00
DRracer
a3fde091ab More than 7.5KB saved by slight refactoring of printing to serial line 2019-07-12 10:10:56 +02:00
Marek Bel
38ff944b03 Reorder EEPROM items to allow possible future grow for Sheets struct. 2019-07-10 21:03:30 +02:00
Marek Bel
8985d2e26c Fix fix EEPROM conflict. 2019-07-10 18:50:16 +02:00
Marek Bel
6ed146c37c Fix EEPROM conflict. 2019-07-10 18:41:12 +02:00
leptun
b8b167d1ca Merge branch 'MK3' into MK3_Enable_fan_waiting_cooldown 2019-07-10 19:26:43 +03:00
Marek Běl
d3dd0ad271
Merge pull request #1952 from NotaRobotexe/sound 
new sound
 2019-07-10 18:06:32 +02:00
Marek Bel
333ade9aee Remove non-existing function prototype. 2019-07-10 17:59:04 +02:00
Marek Bel
7189f44bcd Remove commented out defines. 2019-07-10 17:40:33 +02:00
Marek Bel
e0f46f128d Fix indentation. 2019-07-10 17:39:24 +02:00
Marek Bel
4e7de776cd Disable TMC2130 linarity correction for MK3 to save FLASH to enable compilation. Add symlink /Firmware/variants/printers.h to .gitignore. 2019-07-10 17:07:00 +02:00
MRprusa3d
98bae7af9f
Merge branch 'MK3' into PFW-873 2019-07-10 16:50:14 +02:00
MRprusa3d
3333d937ed some improvements 2019-07-10 16:29:40 +02:00
DRracer
9585789288
Merge pull request #1976 from NotaRobotexe/MK3_3.7.2_PP 
dont fire power panic at normal power off
 2019-07-10 14:19:00 +02:00
Marek Běl
4e3bf276ec
Merge pull request #1984 from leptun/MK3_compile_error_fix_multiple_sheets_Windows 
Fix compile error on Windows when multiple_sheets is merged
 2019-07-09 19:28:35 +02:00
Marek Bel
712fb1cceb #undef EEPROM_SHEETS_BASE so this internal define for compile-time checking only is not used outside of eeprom.h 2019-07-09 19:19:59 +02:00
Marek Běl
fcfc9ca95c
Merge pull request #1979 from DRracer/heatbed_noise_suppression 
Heatbed noise suppression
 2019-07-09 18:33:27 +02:00
leptun
dbc603d5f6 Fix compile error on windows 
addresses issue #1965
 2019-07-09 18:38:24 +03:00
Marek Bel
898f6d9d8b Fix EEPROM_Sheets_base overlay of EEPROM_NOZZLE_DIAMETER_uM. 2019-07-09 13:41:18 +02:00
Marek Bel
cd1ea0a655 Move function declaration and structs declarations to top of eeprom.h file. 2019-07-09 13:38:58 +02:00
MRprusa3d
4d535f1217 ... incl. SupportMenu ;-P 2019-07-09 12:31:20 +02:00
MRprusa3d
8229a45187 pre-production version ;-) 2019-07-09 12:16:51 +02:00
Marek Bel
61566f7fb1 Move translated string MSG_V2_CALIBRATION from untranslated section to PROGMEM_I1, add missing ISTR macro. Revert _T(MSG_SELECT) and _T(MSG_RENAME) to _i("Select") and _i("Rename") as it is preferred macro for internationalized strings. Use MSG_V2_CALIBRATION in both occurrences. 2019-07-08 21:18:55 +02:00
DRracer
a16de83535 heatbed audible noise suppression using short fast PWM pulses with 
variable duty
 2019-07-08 16:42:21 +02:00
NotaRobotexe
9592460281 add old delay 2019-07-04 18:43:59 +02:00
NotaRobotexe
a1a8945bee more code editing 2019-07-04 15:31:44 +02:00
DRracer
1f9dce9513 next almost 200B down 2019-07-04 13:36:02 +02:00
NotaRobotexe
e77898d5dc code edit 2019-07-04 13:21:27 +02:00
NotaRobotexe
81b3b71cca check eeprom inicialization 2019-07-03 19:37:11 +02:00
MRprusa3d
4db4f19128 'variant files' update ;-((( 2019-07-03 18:14:48 +02:00
MRprusa3d
7e3cb98a1f & MK3S 2019-07-03 17:50:41 +02:00
MRprusa3d
a3a7f3106e print parameters checking 2019-07-03 17:21:11 +02:00
NotaRobotexe
ff3c9d1a7c dont fire power panic at normal power off 2019-06-28 11:25:56 +02:00
Marek Bel
a59e7090ea Increase version. 2019-06-27 17:32:40 +02:00
Yuri D'Elia
b6bcb901f3 Correct initialization of eISR_Err 
Further tweak the initial term to improve the linearity of the resulting
speed after BW filtering.
 2019-06-27 13:21:39 +02:00
Marek Bel
d344e514c4 Rename functions and macro to match with naming convention - remove 'P' where there is no pointer to progmem. 2019-06-26 15:51:58 +02:00
Marek Bel
d879794922 Remove first parameter of macro menu_format_sheet_P_E, of function menu_format_sheet_P_E and menu_item_submenu_P as it was always called with the same parameter. Saves 66B of FLASH. 2019-06-26 15:47:06 +02:00
Marek Bel
53dbcdd852 Display sheet name when adjusting Z. Costs 130B of flash. 2019-06-26 15:33:54 +02:00
Marek Bel
4a16fe6902 Save z_offset, bed_temp and pinda_temp with sheet calibration. 2019-06-26 14:10:12 +02:00
Marek Bel
20dd1110f6 Remove unused parameters of function _lcd_babystep(int axis, chonst char *msg). 
Saves 24B of flash memory.
 2019-06-25 19:43:10 +02:00
Marek Bel
ebdeb99134 Add menu to show sheet live adjust Z value. 2019-06-25 18:55:25 +02:00
NotaRobotexe
4058cd144b add delay_keep_alive without updating lcd 2019-06-25 14:30:11 +02:00
NotaRobotexe
3e9dc91cef ifdef for mk2 2019-06-24 18:01:49 +02:00
NotaRobotexe
b5168bd6c2 fan error fix 2019-06-24 17:30:56 +02:00
Marek Bel
b67ec501b4 Add rename sheet menu. 2019-06-24 17:11:13 +02:00
Marek Bel
e6fbac08ed Move sheet selector to submenu. 2019-06-21 15:44:56 +02:00
Marek Bel
19a474eaa5 Fix compiler warnings. 2019-06-20 18:00:29 +02:00
Marek Bel
0a48082609 Add steel sheet profile selector. 2019-06-20 16:40:53 +02:00
Renzo Dani
9a904362e5 code only for TMC2130 2019-06-20 10:17:48 +02:00
Renzo
e54497d802 added new function belt test under calibration menu 2019-06-20 00:09:55 +02:00
Marek Bel
89b578c899 Merge branch 'MK3' into multiple_sheets 2019-06-19 18:40:09 +02:00
Marek Bel
524121141a Remove commented out code. This code is of unknown genesis and purpose. It was added in commit "3.0.10 sync" two years ago and it was already commented out in that moment. 2019-06-19 15:54:24 +02:00
Marek Bel
6a272d83b1 Add compile time check for EEPROM stored varibles size. 2019-06-19 15:09:07 +02:00
Yuri D'Elia
2e073527fb Also avoid E direction inversions while coasting 2019-06-19 14:28:04 +02:00
Marek Bel
64903e0ae8 Remove unused defines. 2019-06-19 14:27:02 +02:00
Yuri D'Elia
4b3af0d2df Respect minimum direction change delay 2019-06-19 13:22:44 +02:00
Marek Bel
8b6629ad58 Fix comment grammar. 2019-06-18 20:00:02 +02:00
Marek Bel
ae9ae95187 MMU: Filter IR sensor signal when detecting whether filament tip passes to heat break. Increase number of tries when loading filament to 3. 2019-06-18 19:15:16 +02:00
KDanielK
6cb85a455f Update mmu.cpp 2019-06-18 15:08:47 +02:00
Marek Bel
24cec4091b Merge branch 'MK3' into sound 2019-06-17 17:28:19 +02:00
Marek Běl
aff020a6d4
Merge pull request #1897 from NotaRobotexe/farm_mode 
PFW-571 send PRN:4 instead PRN:1, PFW-874 new firmware version alert with 30s timeout
 2019-06-14 20:05:30 +02:00
Marek Bel
b1df1fb1f1 Fix formatting. We are never using 2 space indentation. 4 spaces are preferred, tabulator is acceptable if surrounding code uses tabs. 2019-06-14 18:18:27 +02:00
Yuri D'Elia
367a28a5a8 Default to "Live Adjust Z" when longpressing during a print (closes #1604) 
- Disable longpress action when homing or calibrating
- Default to Live Adjust during a print
- Retain "Move Z" otherwise
 2019-06-14 11:44:06 +02:00
Voinea
d81970dd3d Merge branch 'MK3' into MK3_Enable_fan_waiting_cooldown 2019-06-14 11:07:08 +03:00
DRracer
c5d130e763
Merge pull request #1914 from prusa3d/MK3_3.7.2 
Increase version.
 2019-06-14 09:39:41 +02:00
Marek Bel
fee67d9451 Increase version. 2019-06-13 16:37:51 +02:00
Marek Bel
6717590631 Merge branch 'MK3' into MK3_LA15 2019-06-13 15:39:50 +02:00
DRracer
55dc78546b
Merge pull request #1913 from mkbel/fix_spelling 
Fix spelling.
 2019-06-13 15:12:30 +02:00
Marek Bel
25f0eb9a39 Fix spelling. 2019-06-13 15:01:54 +02:00
Marek Bel
72f5e87c61 Merge branch 'MK3' into use_enum_class_2 2019-06-12 19:17:35 +02:00
Marek Bel
1390d4e5b9 Use first letter capital camel case for enum class members. Change underlying type to uint_least8_t. 2019-06-12 19:11:41 +02:00
Marek Bel
5fcf760954 Use first letter capital camel case for enum class members. Rename CustomMsgTypes to CustomMsg. Remove unnecessary maping to numbers. Change underlying type to uint_least8_t. 2019-06-12 18:54:43 +02:00
Marek Bel
51df6cdfdc Remove LcdCommands::Unknown3. Remove LcdCommands mapping to numbers, as it is not needed. 2019-06-12 18:54:37 +02:00
Marek Bel
cbb92860d0 Use first letter capital camel case for enum class members. 2019-06-12 18:54:32 +02:00
Marek Bel
0401490cc1 Use first letter capital camel case for enum class members. 2019-06-12 18:54:25 +02:00
Marek Bel
9ceba00426 Use first letter capital camel case for enum class members. Remove dependency of FanCheck values on TestError values as it is not used. 2019-06-12 18:53:09 +02:00
MRprusa3d
b7d3766ae2
Merge branch 'MK3' into PFW-790 2019-06-12 17:32:13 +02:00
Marek Bel
6dd085bcc5 Use first letter capital camel case for enum class members. 2019-06-12 16:44:07 +02:00
Marek Bel
e393d91b12 Use first letter capital camel case for enum class members. 2019-06-12 16:20:21 +02:00
Marek Bel
cc80bfa020 Merge branch 'MK3' into use_enum_class 2019-06-12 16:04:26 +02:00
DRracer
c7e1e73880 another almost 200B down by proper usage of smaller data types and enum 
classes
 2019-06-12 15:41:55 +02:00
DRracer
94a5175980 Code size reduction - saved almost 2KB 2019-06-12 15:41:34 +02:00
DRracer
8d388fa03a
Merge pull request #1911 from mkbel/layer1_cal_flash 
Layer1 cal flash
 2019-06-12 15:40:59 +02:00
Marek Bel
49f172a7b9 Convert uint8_t cycle control varibles changed in previous commit to uint_least8_t to be potentially more portable. 2019-06-12 15:01:57 +02:00
DRracer
b15bbaf177 for cycles' variables: int -> uint8_t where appropriate, part1 2019-06-12 14:58:15 +02:00
Marek Bel
7ac098a135 Refactor. Put constants needed in functions inside fuctions to limit its scope. 2019-06-12 14:20:20 +02:00
Marek Bel
2755a3733d Document. 2019-06-12 14:15:58 +02:00
Marek Bel
342954b88c Refactor. Make constants producing first layer calibration square more clear. Note layer height discrepancy. 2019-06-12 13:31:17 +02:00
DRracer
4f8ed7f123 for cycles' variables: int -> uint8_t where appropriate, part1 2019-06-12 10:31:09 +02:00
DRracer
baa36ce740 another almost 200B down by proper usage of smaller data types and enum 
classes
 2019-06-12 09:58:42 +02:00
Marek Bel
d528a53526 Refactor. Move lcd_commands_func1() to first_lay_cal.cpp and rename it to lay1cal_square(). Remove its constant parameters. Move remaining G1 code to lay1cal_meander(). Saves 6B of FLASH memory. 2019-06-12 01:36:48 +02:00
Marek Bel
60cc3d58ec Use sprintf_P in first layer calibration. Save 30B of FLASH memory. 2019-06-11 20:00:49 +02:00
Marek Bel
47a183e96e Use loop to enquecommand_P() in first layer calibration. Save 126B of FLASH memory. 2019-06-11 19:49:56 +02:00
Marek Bel
21f4669600 Make count_e() constexpr. 2019-06-11 19:22:08 +02:00
Marek Bel
4effff9e99 Use loop to enquecommand_P() in first layer calibration. Save 10B FLASH memory. 2019-06-11 18:56:29 +02:00
Marek Bel
d21f256cd0 Remove duplicate calls of lcd_timeoutToStatus.start(), move !blocks_queued() && cmd_buffer_empty() condition to outer if, rewrite using switch statement. Save 487B of FLASH memory. 2019-06-11 18:26:59 +02:00
Marek Bel
97a5d6b5f4 Make constants const. 2019-06-11 17:30:37 +02:00
Marek Bel
9b1e3213ae Variable lcd_commands_step doesn't need to be global. 2019-06-11 17:30:19 +02:00
DRracer
58948cffcd Code size reduction - saved almost 2KB 2019-06-11 17:23:01 +02:00
Marek Bel
0c9121e99e Use loop to enquecommand_P() in first layer calibration. 2019-06-11 17:08:56 +02:00
DRracer
f20125a3e2 Code size reduction - saved almost 2KB 2019-06-11 16:24:40 +02:00
Marek Běl
cb6a3e7e12
Merge pull request #1907 from DRracer/fan_check_error_fix 
Do not allow resume printing if fans are still not ok
 2019-06-11 15:12:48 +02:00
DRracer
13c3ab14fa test fan check error only when enabled by #ifdef 2019-06-11 15:05:40 +02:00
DRracer
3e37150552 Do not allow resume printing if fans are still not ok 2019-06-11 14:53:10 +02:00
Marek Bel
27145204ed Use internationalized M117, but anyway the text is not shown. 2019-06-10 21:40:12 +02:00
Marek Bel
4be8fa701e Use loop to enquecommand_P() in first layer calibration. 2019-06-10 20:41:18 +02:00
Yuri D'Elia
c40e3b550d Remove stubs and live K by default 2019-06-10 19:34:00 +02:00
NotaRobotexe
bb980e2fca sound edit, delete mute mode, add blind mode 2019-06-10 15:03:52 +02:00
Marek Běl
28e7772421
Merge pull request #1886 from leptun/MK3_fix_load_filament_5 
Fix Load Filament 5 for MMU2
 2019-06-10 14:45:55 +02:00
Marek Běl
327e6cd39b
Merge pull request #1889 from DRracer/fan_check_error_fix 
Fan check error fix
 2019-06-06 15:52:44 +02:00
DRracer
0cf6bc0677
Merge pull request #1903 from mkbel/filament_runout_mk3_2 
Filament runout mk3 2
 2019-06-06 15:51:35 +02:00
DRracer
83578c3389 documentation + minor code cleanup based on code review 2019-06-06 15:50:13 +02:00
Yuri D'Elia
0239f4bce1 Update/compute advance steps inside calculate_trapezoid_for_block 
Do not store the block e_D ratio, store directly the computed
compression factor so that we can recompute the advance steps
quickly and update them in sync with the acceleration rates.
 2019-06-05 20:25:26 +02:00
Yuri D'Elia
048628083a Remove clear_current_adv_vars() 
The pressure state is already reset implicitly at the end of each block,
meaning an extruder switch will never have to reset the internal state
anyway.

We clear the internal backpressure in the following conditions:

- when switching to a non-LA block
- when quickStop is called
- when the scheduler is idling (losing pressure)
 2019-06-05 20:25:19 +02:00
Yuri D'Elia
7d33089d9a Remove use_advance_lead 
The per-step state is kept implicitly using nextAdvanceISR,
while the current pressure is decoupled anyway.
 2019-06-05 20:25:12 +02:00
Yuri D'Elia
dc436b71fe Fix position_float after a quickStop condition 2019-06-05 20:25:05 +02:00
Yuri D'Elia
fa454f61e4 Drop unused "speed_lookup_table.h" from planner.cpp 2019-06-05 20:24:58 +02:00
MRprusa3d
1d8c24e8a9 "disable_z()" for Delta PSU IV 
correction for (motor) mode switching
 2019-06-05 19:22:04 +02:00
Marek Bel
19351df8a7 Extracted computation of z_shift for M600 into a separate function to 
improve readability. Surprisingly, also the code got shorter.
 2019-06-05 18:34:26 +02:00
Marek Bel
9c3bb14bae remove function forward decl: fsensor_restore_print_and_continue_IR 
revert LCD_BL_PIN change
 2019-06-05 18:34:10 +02:00
DRracer
aeed49a80e Fix filament runout on optical filament sensors 
Reworked the IR variant accordingly
Some code-size optimization in related functions
 2019-06-05 18:33:41 +02:00
DRracer
10247a28a3
Merge pull request #1896 from NotaRobotexe/power_panic 
documentation for power panic
 2019-06-05 16:10:04 +02:00
NotaRobotexe
0cab2284ea PFW-874 new firmware alert timeout 2019-06-05 15:48:10 +02:00
NotaRobotexe
14270ac1f6 power panic documentation 2019-06-05 15:10:51 +02:00
NotaRobotexe
d263728c37 documentation 2019-06-05 14:55:59 +02:00
DRracer
33b2aa5e58
Merge pull request #1894 from NotaRobotexe/power_panic 
Power panic Z axis fix
 2019-06-05 13:34:21 +02:00
NotaRobotexe
2c4e98dc27 power panic improvement 2019-06-05 13:12:08 +02:00
Yuri D'Elia
cda9ed4a1d Reset LA state more carefully during stop conditions 2019-06-04 16:22:40 +02:00
Yuri D'Elia
1bed8cfa94 Don't call fsensor_st_next_block repeatedly during the last step 
Rely on st_block_begin to perform a single call instead of calling
block_chunk for each advance tick in the last step
 2019-06-04 16:22:33 +02:00
Yuri D'Elia
8ce1c04740 Remove useless "extruder under pressure" flag 
That's exactly what LA does
 2019-06-04 16:22:27 +02:00
Yuri D'Elia
bca5618145 Save/restore K during a power panic 2019-06-03 17:33:19 +02:00
Yuri D'Elia
84009e1e8e Do a full fsensor_update() when initializing the sensor 
This correctly populates the "extruder info" details even when
the menu is entered for the first time after starting a print.
 2019-06-03 17:32:57 +02:00
Yuri D'Elia
fa7c0fb2c9 Avoid triggering LA during a Z-priming move 
When recovering from a pause, the nozzle is often primed while
being lowered. If LA is triggered under such a move, the pressure
advance will be wasted.
 2019-06-03 17:32:51 +02:00
Yuri D'Elia
d2432056bd Elide fsensor_st_block_begin, saving some cycles/bytes 2019-06-03 17:32:43 +02:00
DRracer
5985c0608e Revert changes to pins_Einsy_1_0.h not related to the fan check error 
fix
 2019-06-03 09:02:27 +02:00
Yuri D'Elia
5cd0177389 Cleanup fsensor_st_block_begin 2019-06-02 18:17:59 +02:00
Yuri D'Elia
b4bf79297f Remove unneeded includes from fsensor 2019-06-02 01:08:03 +02:00
Yuri D'Elia
c50b1c0351 Rework the filament counter logic 
- Move direction checks out of fsensor: fsensor_counter is now
  always in the same direction as e_steps
- Check the filament chunk after e_steps have been physically done,
  using the real e_step count so far
 2019-06-01 22:08:00 +02:00
DRracer
09fee4e64d remove fan error simulation automaton 2019-05-31 11:30:30 +02:00
DRracer
6755791778 Fix repeated fan error checking 2019-05-31 11:29:11 +02:00
DRracer
adb5baa12b Merge remote-tracking branch 'upstream/MK3' into MK3 2019-05-31 11:05:24 +02:00
DRracer
ebfad55617
Merge pull request #1888 from mkbel/always_cut_independent 
Always cut independent
 2019-05-31 07:00:37 +02:00
Marek Bel
00da4640e2 Document. 2019-05-30 23:29:33 +02:00
Marek Bel
e79c203c96 Do not always cut if it is not enabled from menu. 2019-05-30 23:04:06 +02:00