3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,623 Commits 3 Branches 78 Tags 40 MiB
f9a92e2277
Commit Graph

3662 Commits

Author SHA1 Message Date
DRracer
42311db5f1
Merge pull request #2789 from wavexx/MK3_TMC2130_DEDGE 
Use/enable TMC2130 DEDGE support in MK3/MK3S
 2021-01-29 11:13:09 +01:00
D.R.racer
caf58b16b6 Fix handling EOF 
+ save ~160B by using local variables
+ rename some of the vars to more descriptive names
+ remove consecutiveEmptyLines handling from cmdqueue
 2021-01-29 08:29:51 +01:00
Yuri D'Elia
e9d5c44732 Also toggle pins efficiently in sm4.c 
Use the same technique used in fastio to toggle pins efficiently in sm4
when DEDGE is used.
 2021-01-29 00:13:49 +01:00
D.R.racer
6c9c1423c6 Remove temporary changes from SdBaseFile.h 2021-01-28 09:42:50 +01:00
D.R.racer
71d825d0f2 Return SdBaseFile into previous state 
no changes necessary afterall
 2021-01-28 09:41:30 +01:00
D.R.racer
7279de7403 Separate reading G-code files and writing to a file 
- extract common strings
- cleanup openFileWrite and openFileReadFilteredGcode formatting a bit
Alltogether - code size 400B down
 2021-01-28 09:37:58 +01:00
D.R.racer
c05b625b1c Fix occasionally skipped valid G-code lines 
which also allowed for removal of the pre-increment -> post-increment
workaround
 2021-01-28 08:13:16 +01:00
D.R.racer
d1fd5a555f Clean up gfReset() 2021-01-27 14:12:11 +01:00
D.R.racer
b2cf5b7b6c Fix seekSetFilteredGcode() 
+some more debug code which will vanish after all is done and verified
 2021-01-27 13:01:25 +01:00
D.R.racer
b6c59e08ac Workaround ++gfCacheP into postincrement ld r22, Z+ 
TODO: ideally improve the automaton to work with postincrement only, at
least in this case.
 2021-01-27 09:52:20 +01:00
D.R.racer
d275fe0e83 Extract gcode filter from SdBaseFile into SdFile + optimization 
- Start saving instructions as the whole PR was >1KB long.
- It turned out the compiler was unable to understand the core skipping
cycle and an ASM version had to be used.
- Add seekSet aware of the G-code filter
 2021-01-27 09:33:28 +01:00
D.R.racer
c3758d350e Fast skipping of large comment blocks 
This is an extension/optimization of PR #2956.
It uses the cached 512B block buffer to avoid heavy-weight read() in SdBaseFile.
Even though this principle allowed the AVR to skip ~600KB of data within ~5 seconds,
the impact on code base is huge, especially into well proven and long-term stable
parts like reading a file from the SD card.

The sole purpose of this PR is to show/verify the possibility of the AVR CPU
in relation to adding thumbnails into MK3 G-codes.
Moreover, this PR shall not be merged unless the missing/commented features
are restored - especially file seeking and M84 search.

PFW-1175
 2021-01-27 07:03:51 +01:00
D.R.racer
dcc6605809 Workaround for skipping large comment blocks 
If there are large blocks of comments in the G-code,
the printer may get shot down by its own watchdog.
Watchdog is generally set to 4s and updated only
in manage_heaters (and some other spots in some specific cases).

So far, the code reading the file and feeding it into Marlin
cycles indefinitely until it finds valid G-code lines and fills up the
command queue.

If the block is large enough, the printer cannot read it completely
within those 4s.

A simple workaround - bail out after some consecutive empty/comment
lines to enable other parts of code do their job (especially
manage_heaters).

Tested on MK404, previous FW fails with 600KB of comment lines at the
beginning, this patch survives. The printer even draws some update
on its status screen before starting a real print.
 2021-01-27 07:03:51 +01:00
Yuri D'Elia
a9625747db Reinstate the nop instruction as delay in non-DEDGE 
When TMC2130_MINIMUM_PULSE is 0 a minimum delay is implied.
In this case, use a single "nop" instruction.
 2021-01-26 19:43:29 +01:00
Yuri D'Elia
d3734b02cc Also fix delay instances inside unused BACKLASH_[XY] 2021-01-26 16:18:23 +01:00
Yuri D'Elia
b17cdcd4d7 Ensure MINIMUM_PULSE is always 0 in DEDGE mode 
This ensures delays are always properly elided without having to check
for DEDGE all over the place.
 2021-01-26 16:12:59 +01:00
Yuri D'Elia
2a6989ecd5 Remove TMC2130 special-cases 
With the new STEPPER_MINIMUM_DELAY being automatically removed for
TMC2130 we no longer need to add specialized #ifdefs for DEDGE in
babystep.
 2021-01-26 16:09:23 +01:00
Yuri D'Elia
4fed728e08 Elide delayMicroseconds for TMC2130 in non-DEDGE mode 
Introduce new macros TMC2130_MINIMUM_DELAY/STEPPER_MINIMUM_DELAY for
blocking pauses.

If MINIMUM_PULSE has defined to be zero, avoid the delay call entirely.
 2021-01-26 16:02:53 +01:00
3d-gussner
f40c593d11 Fix few translations not being used due to spaces or upper case 2021-01-26 14:15:34 +01:00
D.R.racer
c28e5a9dbc Farmer's request 2 
Farmers request having the Change filament menu item always visible in
the main menu and located after the Live Adjust Z (which disappears
after the first few printed layers).
 2021-01-26 12:19:41 +01:00
DRracer
bfe93d3959
Merge pull request #2951 from DRracer/pvb-08 
Add PVB preheat and 0.8mm nozzle presets
 2021-01-26 12:09:41 +01:00
3d-gussner
ad5d068690 Update char lengths part 1 
Fix some too long translations
 2021-01-26 12:09:35 +01:00
DRracer
891f37a622
Merge pull request #2982 from DRracer/codesize 
Reduce code size and RAM usage
 2021-01-26 12:04:39 +01:00
3d-gussner
c555907a12 Remove duplicate string G-code sliced for a different printer type. Please re-slice the model again. Print cancelled. using MSG_GCODE_DIFF_PRINTER_CANCELLED 2021-01-26 11:01:50 +01:00
3d-gussner
51d1e0bd8a Remove duplicate string G-code sliced for a different printer type. Continue? using MSG_GCODE_DIFF_PRINTER_CONTINUE 2021-01-26 10:42:56 +01:00
3d-gussner
7916f8b9e8 Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize 2021-01-26 10:13:11 +01:00
D.R.racer
0eb7261e29 Save ~100B on menu implementation 2021-01-26 09:29:17 +01:00
3d-gussner
ba8386573a Remove duplicate string Resume print using MSG_RESUME_PRINT 2021-01-26 09:23:55 +01:00
3d-gussner
c6a01b3806 Remove duplicate string Reset using MSG_RESET 2021-01-26 09:15:46 +01:00
3d-gussner
ab5aad636f Remove duplicate string Mesh Bed Leveling and Mesh bed leveling using MSG_MESH_BED_LEVELING 
Fixed few too long translations
 2021-01-26 09:05:38 +01:00
DRracer
f4cee7ce84
Merge pull request #2983 from leptun/MK3_fix_sm4.h_line_ending 
Fix sm4.h line ending
 2021-01-26 08:45:07 +01:00
DRracer
bce9f8c949
Merge pull request #2984 from leptun/MK3_Serial_LF_only 
Do not send CR on the serial line
 2021-01-26 08:42:47 +01:00
DRracer
c465417f50
Merge pull request #2987 from leptun/PFW-1144-LongPathName 
"M20 L" support. Print long filenames
 2021-01-26 08:40:26 +01:00
3d-gussner
84ed0725f2 Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize 2021-01-26 08:32:03 +01:00
3d-gussner
bce8501eea Remove duplicate string Extruder using MSG_Extruder 2021-01-26 08:31:21 +01:00
Voinea Dragos
c6588193ad Fix some more stuff in cardreader.cpp 
Saved 4B of flash and 60B of RAM
 2021-01-26 09:25:41 +02:00
3d-gussner
ab18a3ccc3 Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize 2021-01-26 08:24:11 +01:00
3d-gussner
530b9f50b8 Remove duplicate string Eject filament using MSG_EJECT_FILAMENT 
Fix few translations
 2021-01-26 08:22:08 +01:00
D.R.racer
348902240e Fix code_seen_P("fv") broken by one of the merges 2021-01-26 08:02:33 +01:00
3d-gussner
269fabc330 Remove duplicate string Cut filament using MSG_CUT_FILAMENT 2021-01-26 07:15:46 +01:00
3d-gussner
797d8e74a3 Remove duplicate string Checking X axis and Checking Y axis using MSG_CHECKING_X and MSG_CHECKING_Y 2021-01-26 07:10:57 +01:00
3d-gussner
2d1e1e4cee Remove duplicate string Fans check using MSG_FANS_CHECK 2021-01-25 20:13:12 +01:00
3d-gussner
d117a299f7 Remove duplicate string Fil. runouts using MSG_FIL_RUNOUTS 2021-01-25 20:04:18 +01:00
3d-gussner
10bbd64b41 Remove duplicate string Crash using MSG_CRASH 
Better Italian translation, thanks to @wavexx
Fix Polish translation as it was too long for the menue and caused LCD issues.
 2021-01-25 18:53:53 +01:00
3d-gussner
4878db7365 Remove duplicate string Last print failures using MSG_LAST_PRINT_FAILURES 
Fix too long translations in Spanish and Italian for this message
 2021-01-25 18:38:35 +01:00
3d-gussner
99867c8fbd Remove duplicate string Total failures using MSG_TOTAL_FAILURES 2021-01-25 18:06:47 +01:00
3d-gussner
8f0a45e8a4 Remove duplicate string Steel sheets and Total using MSG_STEEL_SHEETS and MSG_TOTAL 2021-01-25 17:58:51 +01:00
3d-gussner
7222cf05cf Remove duplicate string MMU Fails and MMU Load Fails using MSG_MMU_FAILS and MSG_MMU_LOAD_FAILS 2021-01-25 17:38:36 +01:00
3d-gussner
fbb3fad64b Remove duplicate string Last print using MSG_LAST_PRINT 2021-01-25 16:54:26 +01:00
3d-gussner
7891d12a32 Remove duplicate string Is filament loaded? using MSG_FILAMENT_LOADED 2021-01-25 16:44:55 +01:00
3d-gussner
223f32deae Remove duplicate string HW Setup" using MSG_HW_SETUP` 2021-01-25 16:15:57 +01:00
3d-gussner
5c1da227fe Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize 2021-01-25 16:00:46 +01:00
3d-gussner
377a59c624 Remove duplicate string Belt status 2021-01-25 15:53:31 +01:00
D.R.racer
d8917a304a Reuse lcd_space() instead of in-place printing of spaces in a cycle 
Saves another ~40B
 2021-01-25 15:21:25 +01:00
D.R.racer
783e4bbaf9 Add lcd_putc_at (code down >150B), refactor lcd_selftest_screen_step 
(RAM down 10B)
 2021-01-25 14:58:57 +01:00
DRracer
3975415490
Merge branch 'MK3' into codesize 2021-01-25 12:43:30 +01:00
DRracer
58351fb27a
Merge pull request #2977 from DRracer/farm-patch1 
Farmers' requests
 2021-01-25 11:15:44 +01:00
D.R.racer
514321f2ce Remove farm_no completely + reuse prusa_stat_farm_number() where 
applicable
 2021-01-25 11:09:28 +01:00
Voinea Dragos
2b3729125d Prevent wdt reset during file listing 2021-01-25 11:46:51 +02:00
D.R.racer
c1ff6242b0 Avoid copying FW version number into RAM - use the PROGMEM string 2021-01-25 09:03:04 +01:00
Voinea Dragos
4f769f0faa PRUSA RESET safety precaution 2021-01-25 09:58:12 +02:00
Voinea Dragos
9fa9d6b063 Move farm strings to PROGMEM 2021-01-25 09:48:17 +02:00
D.R.racer
6a62674bd8 Keep PRUSA RESET available even in non-farm mode 2021-01-25 08:43:37 +01:00
D.R.racer
98a4da571d Merge branch 'farm-patch1' of github.com:DRracer/Prusa-Firmware into farm-patch1 2021-01-25 08:39:20 +01:00
D.R.racer
9bfada94f0 Remove commented code 2021-01-25 08:38:44 +01:00
Voinea Dragos
e8e4aabfdb Add gcode documentation 2021-01-22 21:07:14 +02:00
Voinea Dragos
31a6270f69 Abuse \n in lcd printing instead of constantly calling other functions 
"other functions" being lcd_set_cursor and lcd_print(char). Saves 100B of flash
 2021-01-22 20:12:11 +02:00
Voinea Dragos
4d3f056b81 Fix factory reset menu rendering 2021-01-22 20:07:27 +02:00
Voinea Dragos
37c431abd9 another lcd_puts_at_P 2021-01-22 19:44:46 +02:00
D.R.racer
3ccd1b2b2b Refactor lcd_set_cursor + lcd_puts_P -> lcd_puts_at_P 
saves considerable amount of flash
 2021-01-22 18:34:47 +01:00
Voinea Dragos
bc7d36b6ff Fix sm4.h line ending 2021-01-22 18:57:24 +02:00
Voinea Dragos
da21916473 Change printf_P without format arguments and NL to puts_P only 2021-01-22 18:56:05 +02:00
D.R.racer
9b34789398 Cleanup reset_menu() 2021-01-22 17:54:44 +01:00
D.R.racer
90d22a376d Remove unused vars in xyzcal.cpp 2021-01-22 17:50:08 +01:00
D.R.racer
2780a03967 Improve duplicate_Tcode_ignored 
kudos to @leptun
 2021-01-22 17:47:44 +01:00
D.R.racer
3dc85b319c Marlin_main.cpp hacks 
- code_seen("string") -> code_seen_P(PSTR("string")) saved >100B of RAM!
- serial print "." -> '.' saved some code
- extract commonly used string
- SERIAL_PROTOCOLLN("") -> SERIAL_PROTOCOLLN() as no argument is
necessary
 2021-01-22 17:15:36 +01:00
D.R.racer
4dec171266 Reduce code by 104 bytes in xyzcal.cpp 
Extract CLAMP_median into a non-inline function.
The extra instructions to call that function do not matter from the
speed perspective
 2021-01-22 17:13:28 +01:00
D.R.racer
c710253cca Code cleanup and size reduction and RAM optimization 
Replase single character strings with single characters when calling
lcd_print
 2021-01-22 17:11:51 +01:00
Voinea Dragos
9fda6b774d Do not send CR on the serial line 2021-01-22 17:58:01 +02:00
DRracer
f809691003
Merge pull request #2968 from espr14/PFW-1186 
Calibration: reduce code size PFW-1186
 2021-01-22 14:05:13 +01:00
DRracer
eceb7b4e5f
Merge pull request #2981 from 3d-gussner/PFW-1140-2 
PFW-1140 Add fan speed and position auto report
 2021-01-22 13:00:23 +01:00
DRracer
defbaa6ff8
Merge branch 'MK3' into PFW-1186 2021-01-22 12:46:25 +01:00
DRracer
4c952a0a9c
Merge pull request #2962 from espr14/PFW-1178 
Calibration: code cleaning PFW-1178
 2021-01-22 12:41:24 +01:00
3d-gussner
008c6a2590 Remove defines 2021-01-22 12:26:29 +01:00
DRracer
ab59449b7c
Merge pull request #2961 from espr14/PFW-1179 
Calibration: print skew results PFW-1179
 2021-01-22 12:24:52 +01:00
DRracer
85f2c29dfe
Merge pull request #2960 from espr14/PFW-1169-3 
Calibration: more accelerations, fix scan, more robust circle search PFW-1169
 2021-01-22 12:20:35 +01:00
3d-gussner
ede3f34051 Documentation 2021-01-22 10:40:29 +01:00
Voinea Dragos
ced3d9fa77 "M20 L" support. Print long filenames 2021-01-22 11:13:44 +02:00
D.R.racer
31951fe8c9 Code refactoring 
Motivation:
- save some RAM joining the autoreport flags into 1 byte
- encapsulate the magic of setting bit masks/features into a class with
a stable public interface
 2021-01-20 11:46:25 +01:00
Voinea Dragos
70d254a1fc Allow resetting when not in farm mode 2021-01-19 13:39:21 +02:00
Voinea Dragos
48b4bdfe8e Make the PRUSA RESET command functional on the miniRambo 2021-01-19 13:36:08 +02:00
Voinea Dragos
542677c080 Prevent switching to serial port 1 on miniRambo and such 2021-01-19 13:11:48 +02:00
Voinea Dragos
9b847715ac Rename F0 to FRM on the status screen 2021-01-19 13:11:25 +02:00
Voinea Dragos
3f5cfc4e61 Move the change filament button to the main menu when farm printing 
PFW-945
 2021-01-19 13:06:23 +02:00
D.R.racer
a9d8ddc89c Farmers' requests 1 
- remove the UI and related stuff to setting a farm number (the
communication protocol must remain intact)
- remove confirmation after print finished ("Print OK")

Both requests are highly welcome, since they allow for lowering the code
size by >1KB

PFW-963, PFW-927
 2021-01-19 09:58:02 +01:00
3d-gussner
9264454d3a Gcode M123 only if FANCHECK and TACHOs are defined 
Gcode `M155` added parameter "C" to activate auto-report for temperatures, fans and positions
Updated doxygen
@todo Update RepRap Wiki
@todo improve code
 2021-01-19 09:01:46 +01:00
espr14
735895c6bc Use fabs 2021-01-14 16:38:34 +01:00
espr14
ca4e638ea2 Don't use extrusion in XYZ calibration 2021-01-14 13:19:30 +01:00
Alex Voinea
20c3f4cb77 Update comments 2021-01-14 12:53:12 +02:00
Voinea Dragos
dea3f23a69 PRUSA SN in eeprom 2021-01-14 11:52:22 +02:00
espr14
9867ecd3f9 Reduce unnecessary code 2021-01-13 13:59:20 +01:00
espr14
21d6f970ef Fix build 2021-01-12 16:26:46 +01:00
espr14
f3faf651c5 Move down before scanning 2021-01-12 16:12:34 +01:00
espr14
9dceb488b6 Revert double scanning 2021-01-12 16:04:04 +01:00
espr14
546812294e Clean serial output 2021-01-12 00:34:28 +01:00
espr14
d7507649d8 Remove degree char 2021-01-12 00:28:46 +01:00
espr14
180af46fe4 Try double height 2021-01-12 00:27:06 +01:00
espr14
333526f65d Single skew output 2021-01-11 23:14:12 +01:00
espr14
e6e44fe188 Convert to degrees 2021-01-11 23:13:08 +01:00
espr14
b8443b00ad Reverse reverse 2021-01-11 22:18:50 +01:00
espr14
09892bec52 Reverse 2021-01-11 18:46:56 +01:00
Yuri D'Elia
78f8f1e8f9 Remove stray serial newlines in fsensor autoload messages 2021-01-11 18:31:36 +01:00
espr14
211e5f5f37 Define DBG output 2021-01-11 17:31:26 +01:00
espr14
904a23b69e Report calibration results 2021-01-11 17:02:41 +01:00
espr14
2e40a27460 Alignment, comments 2021-01-11 15:40:12 +01:00
DRracer
4728bf2182
Merge pull request #2875 from wavexx/raise_while_preheating 
Raise Z while preheating when auto/[un]loading the filament
 2021-01-11 07:45:54 +01:00
DRracer
1a6b6fb491
Merge pull request #1776 from wavexx/unused_tmc_defines 
Remove an unused define
 2021-01-11 07:43:44 +01:00
DRracer
ef51652e39
Merge pull request #1758 from wavexx/disable_filament_checks_in_extr_menu 
Disable filament checks inside the Move -> Extruder menu
 2021-01-11 07:42:25 +01:00
3d-gussner
a064ce4722 Add gcode M123 Tachometer value 2021-01-10 15:15:44 +01:00
D.R.racer
8a083c9970 Add PVB preheat and 0.8mm nozzle presets 
minor features reflecting the latest announcement

Needs some 300B of CPU flash though, after 3.9.3 we need to optimize code
size again.
 2021-01-08 13:52:39 +01:00
DRracer
5c3513a6cc
Merge pull request #2397 from odaki/flashair_display_ip 
Show the FlashAir IP address
 2021-01-08 12:20:12 +01:00
espr14
584177e8fd Fix E mask 2021-01-08 10:24:36 +01:00
DRracer
f549ce690a
Merge pull request #2949 from prusa3d/MK3_3.9.3 
Merge 3.9.3 back into MK3
 2021-01-08 10:20:40 +01:00
3d-gussner
3329d34ce4 Fix doxygen issue with "^" and "|" only in one line 
Doxygen 1.8.13 had no issues but newer doxygen version are failing
to build tables, if a line only consists of "^" and "|"
 2021-01-08 09:40:13 +01:00
DRracer
0ed6b537a8
Merge branch 'MK3' into MK3_3.9.3 2021-01-07 13:27:51 +01:00
D.R.racer
603d704178 Version changed (3.9.3 build 3556) 2021-01-07 12:50:58 +01:00
3d-gussner
8a27b6abdb Move Z up before xy home running xyz calibration 
to prevent scratches on bed and sheet
 2021-01-07 11:45:40 +01:00
espr14
2981b9e9c5 OctoPrint needs new lines 2021-01-04 14:59:12 +01:00
espr14
cc9e7b9376 Fix comments, remove unused 2021-01-04 13:01:06 +01:00
espr14
49d57ed621 Median dynamic circle 2020-12-30 17:02:31 +01:00
espr14
a9fd09ca3f Implement median 2020-12-30 15:15:17 +01:00
espr14
13fefaa1bf Fix typo 2020-12-30 15:01:32 +01:00
espr14
03b87ae68b Add 8 pixel circle pattern 2020-12-30 13:08:47 +01:00
espr14
c14e725574 Fix moves 2020-12-29 18:27:33 +01:00
espr14
c2ab8785f4 Revert Manhattan 2020-12-29 17:31:34 +01:00
espr14
c1e6567461 Fix step axis coding 2020-12-29 17:17:32 +01:00
espr14
922769cefb axis -> axes 2020-12-29 17:14:18 +01:00
espr14
a01dfe26fe Add Manhattan movement 2020-12-29 17:13:11 +01:00
espr14
6461206e08 Fix direction setting 2020-12-29 14:19:05 +01:00
espr14
b6e78bf900 Fix direction 2020-12-29 14:08:30 +01:00
espr14
c11e8654da Revert both directions, refactor code 2020-12-29 12:39:35 +01:00
espr14
e86ba5e26d Scan only once 2020-12-28 16:45:39 +01:00
D.R.racer
7e02a7f118 Version changed (3.9.3-RC1 build 3555) 2020-12-26 15:45:34 +01:00
DRracer
d61cdf2b88
Merge pull request #2932 from espr14/PFW-1165-2 
Calibration: Turn off speed optimization due to MK2.5 PFW-1165
 2020-12-25 18:22:04 +01:00
espr14
80e32ce1a5 Turn off speed optimization due to MK2.5 2020-12-25 15:27:42 +01:00
3d-gussner
12f4102272 Group PINDA defines 2020-12-23 21:00:02 +01:00
3d-gussner
76eb743139 Set default SuperPINDA toggle on MK2.5/S to NO 2020-12-23 20:59:33 +01:00
3d-gussner
4b510fef0a Add PINDA_TEMP_COMP variable to enable SuperPINDA toggle menu/function 2020-12-23 20:59:08 +01:00
3d-gussner
a97587f373 Changed PINDA_MINTEMP having own value 
Prevent bad readings/issues if someone changes the bed thermistor that is "better" with lower min values and creates a custom firmware.
The firmware will now be in the range of the PINDAv2 thermistor independant from the bed thermistor (which may change and need adjustments)
 2020-12-23 20:58:44 +01:00
3d-gussner
732b6e0cad Cleanup 2020-12-23 20:58:20 +01:00
3d-gussner
62c36f718b Add SuperPINDA support for MK2.5/S 
- Changed DETECT_SUPERPINDA to SUPERPINDA_SUPPORT as on miniRAMo the thermistor readings below 30°C
  aren't accurate egnough to determine if SUPERPINDA is connected or not
- Add LCD toggle menu Settings -> HW Setup -> SuperPINDA [Yes/No] to overwrite SuperPINDA detection
  - If EEPROM_PINDA_TEMP_COMPENSTATION is empty = 0xff then detect SuperPINDA by checking thermistor
  - If EEPROM_PINDA_TEMP_COMPENSTAION is 0 then forec enable for temperature compensation menues and functions
  - If EEPROM_PINDA_TEMP_COMPENSATION is 1 then force disable for temperature compensation menues and functions
 2020-12-23 20:56:50 +01:00
espr14
e6eb3be247 Set jerk = 1, accel. = 1000 2020-12-23 16:56:04 +01:00
espr14
979525f028 Add more restarts 2020-12-22 19:34:12 +01:00
espr14
25d138d198 Revert max.speed 2020-12-22 15:10:01 +01:00
espr14
e24a763e46 Cleanup 2020-12-22 14:45:55 +01:00
espr14
8df2eccf45 Remove defines and unused vars 2020-12-22 14:36:37 +01:00
espr14
25d6e24778 Add comments 2020-12-22 14:16:20 +01:00
espr14
90c8045f7d Clean the code 2020-12-22 13:59:50 +01:00
espr14
20659ec818 Add debug output 2020-12-22 12:51:22 +01:00
espr14
c397e9249a Restart scanning 2020-12-21 19:33:36 +01:00
espr14
1610c96fc4 Fix and report circle divergence 2020-12-21 18:05:52 +01:00
espr14
744763f0a9 Fix diagonal movement 2020-12-21 17:34:54 +01:00
espr14
de23a845b4 Remove unused 2020-12-21 15:53:51 +01:00
espr14
3c9168f8f6 Optimize diagonal 2020-12-21 15:52:25 +01:00
espr14
9a59369c77 Diagonal acceleration 2020-12-21 15:32:09 +01:00
espr14
27ff6b0057 Fix build 2020-12-21 13:11:48 +01:00
espr14
9b55ff9de1 Acceleration up and down 2020-12-21 13:05:26 +01:00
espr14
f39a0999e1 Prepare full acceleration control 2020-12-18 21:33:43 +01:00
espr14
ccf26e4e7a Basic acceleration 2020-12-18 20:04:00 +01:00
espr14
a8f4207df9 New XYZ calibration algorithm 2020-12-17 18:19:36 +01:00
Alex Voinea
2ac106d9fe
Merge branch 'MK3' into MK3_random_patches 2020-11-30 09:14:58 +02:00
odaki
61c48df0bd Merge remote-tracking branch 'upstream/MK3' into flashair_display_ip 2020-11-23 15:53:03 +09:00
Voinea Dragos
f96f75bd17 Fix warning and a bit of indentation 
Saved 64B of flash and 1B of SRAM
 2020-11-16 10:58:26 +02:00
Voinea Dragos
f3953d7c83 Merge branch 'MK3' into MK3_random_patches 2020-11-16 09:11:12 +02:00
odaki
c0070506fb Merge branch 'MK3' into flashair_display_ip 2020-11-13 22:28:22 +09:00
DRracer
d013abfd52
Merge pull request #2890 from prusa3d/MK3_3.9.2 
Merge MK3_3.9.2 into MK3
 2020-11-13 13:03:35 +01:00
Alex Voinea
807eddafb0
Remove debugging code 2020-11-13 12:12:18 +02:00
Alex Voinea
43ace00a24
Fill the progress bar at the end and code optimizations 2020-11-12 18:43:48 +02:00
Alex Voinea
5ad125cbed
Merge branch 'MK3' into MK3_filecheck_progress_bar 2020-11-12 15:53:33 +02:00
D.R.racer
396ee0fde2
Version changed (3.9.2 build 3524) 2020-11-10 10:27:18 +01:00
Voinea Dragos
176e2674b9 Fix M105 ok hack 2020-11-09 21:49:56 +02:00
Voinea Dragos
023ccb0e89 Fix double ok in M603 2020-11-09 21:49:56 +02:00
Alex Voinea
0c305ee5f5 Fix warning 2020-11-09 21:49:56 +02:00
Alex Voinea
4abf1f436a Gracefully dump the queue + fixes to fancheck 2020-11-09 21:49:56 +02:00
Alex Voinea
fdbbc7d62a Terminate last line from the SD card even if it doesn't have a \n 2020-11-09 21:49:56 +02:00
Alex Voinea
ff56ece6f8 Remove redundant get_command prototype 2020-11-09 21:49:56 +02:00
Alex Voinea
5f0e4a1cac Temporary M602 patch. Needs more work 2020-11-09 21:49:56 +02:00
Alex Voinea
6873a9d28e Only send capabilities when M115 is run without arguments 2020-11-09 21:49:56 +02:00
Alex Voinea
0ee8e1f424 Fix missing ok in M601 2020-11-09 21:49:56 +02:00
Alex Voinea
e5ebf7c67f Fix missing keep-alive messages 2020-11-09 21:49:56 +02:00
Alex Voinea
26f62f042e Use the longest filename instead of just using the long filename in M27 2020-11-09 21:49:56 +02:00
D.R.racer
4747c8c9f5 Increase top Z-offset limit based on some test results 2020-11-09 12:29:19 +01:00
D.R.racer
5184910ef9 Try harder finding the calibration center 
with alternative PINDAs it looks like their properties vary a lot
and searching for the calibration center requires trying different
Z levels.
 2020-11-09 06:33:41 +01:00
D.R.racer
cd4e16ef9f XYZ calibration tune 
PFW-1159
 2020-11-06 08:25:56 +01:00
Yuri D'Elia
e28159122f Make MIN_Z_FOR_LOAD/UNLOAD the same 
When unloading + preheat immediately followed by a load, the carriage is
raised first up to 20mm, then again to 50mm.

With PR #2318 it makes sense to make more space for the extra extrusion
anyway, so make them the same. This moves the carriage only once _while_
preheating, which is nice.
 2020-10-29 15:30:16 +01:00
Yuri D'Elia
5f23474c95 Raise Z while preheating when auto/[un]loading the filament 
Preheating already raised Z to avoid scorching the PEI sheet, as does
filament loading/unloading to allow for excess material to be removed.

However, when loading/autoloading/unloading via the LCD with a cold
nozzle the preheating menu is performed before the carriage is raised,
leaving the carriage close to the sheet while heating the nozzle.

Pre-raise the carriage already while waiting, so that the subsequent
move is automagically skipped.

Set bFilamentWaitingFlag only once to perform both the LCD
initialization and raising to the appropriate height.

Should fix #2761
 2020-10-28 20:49:28 +01:00
DRracer
c05d4c9112
Update messages.h 
cleanup space
 2020-10-21 17:04:20 +02:00
MartinPoupa
a84d7ef8d6 corectino of declaration 2020-10-13 16:56:57 +02:00
MartinPoupa
c8c7563e8a LCD status changed 
When the lcd status changed it will be printed "LCD status changed" to serial line.
 2020-10-07 17:44:17 +02:00
Yuri D'Elia
df824414ef Fix probing in IR_SENSOR 2020-09-28 21:02:06 +02:00
Yuri D'Elia
c2e8d229a7 Be more compliant in the I2C protocol 
- Enter a repeated-start for reading data
- Write in the same session
 2020-09-28 20:21:07 +02:00
odaki
ebc987bd23 Merge branch 'MK3' into flashair_display_ip 2020-09-28 21:19:44 +09:00
Yuri D'Elia
384f40956c Remove obsolete cbi/sbi 2020-09-27 16:42:20 +02:00
Yuri D'Elia
6d476d7144 Still use SWI2C on RAMBo10a boards 
The wiring for the PAT9125 on RAMBo10a boards is not directly connected
to the SCL pin and requires the sw mode.

Detect this requirement by checking the definition for the SWI2C_SCL pin
in the board definition.

Remove SWI2C_SCL/SDA from the other boards to use the HW mode.
 2020-09-27 14:29:07 +02:00
DRracer
134f841380
Merge pull request #2841 from leptun/MK3_SD_REMOVED_MESSAGE 
SD card released message
 2020-09-23 10:22:04 +02:00
DRracer
95e2e2f69c
Merge pull request #2832 from leptun/MK3_AUTO_REPORT_TEMPERATURES 
Mk3 auto report temperatures
 2020-09-23 08:51:26 +02:00
DRracer
ef0840f587
Merge pull request #2786 from leptun/MK3_M115_Capabilities_report 
Printer Capabilities framework + Macros + Code cleanup
 2020-09-23 08:37:03 +02:00
Alex Voinea
d9fa44c142
Document M155 command 2020-09-23 09:14:35 +03:00
DRracer
e24466f22e
Merge pull request #2837 from prusa3d/MK3_3.9.1 
Merge MK3_3.9.1 into MK3
 2020-09-22 10:43:59 +02:00
odaki
4c7100985e Merge branch 'MK3_3.9.1' into flashair_display_ip 2020-09-22 11:59:05 +09:00
D.R.racer
7278458316 Version changed (3.9.1 build 3518) 2020-09-18 16:59:22 +02:00
3d-gussner
bd7bb5acb3
Update new messages and their translations (#2835) 
* Add missing translations

* Add missing CZ and IT translations

* Update CZ, FR, IT, ES translations
CZ thanks to @DRracer
FR thanks to Carlin Dcustom
ES tried myself
IT thanks to @wavexx

Only missing is PL

* Improve wording +change keys

* Add missing PL translations

* Fix copy paste error in Italian
fix double translations

* Make PL translation shorter

* Fix some length issues and capital letters

* Fixed again translations length issues
updated po files

* Update FR translation - thanks @awenelo

* Fix execution of lang-check.py

- Make lang-check.py executable
- Execute directly instead of specifying the python interpreter manually
  ("python" is no longer available on Debian, and would default to
  version 2 prior to that despite being written for python 3)

* Fix permissions of translation files

Co-authored-by: D.R.racer <drracer@drracer.eu>
Co-authored-by: Yuri D'Elia <wavexx@thregr.org>
 2020-09-18 16:50:25 +02:00
Voinea Dragos
2f5083daa7
quickfix to mistake made in the experimental menu visibility code 
Fix indentation
 2020-09-15 18:56:39 +03:00
DRracer
9fb6efc435
Add newline at the end of file 2020-09-15 14:56:41 +02:00
Voinea Dragos
c0fced2f3c Fix typo 2020-09-15 14:21:21 +03:00
Voinea Dragos
e2ef5af40e Add capability line 2020-09-15 14:21:09 +03:00
Voinea Dragos
a1dfbffedb Merge branch 'MK3_M115_Capabilities_report' into MK3_AUTO_REPORT_TEMPERATURES 2020-09-15 13:39:00 +03:00
Voinea Dragos
073eadff7e Merge branch 'MK3' into MK3_AUTO_REPORT_TEMPERATURES 2020-09-15 13:38:47 +03:00
DRracer
3093c8c7f6
Merge pull request #2829 from wavexx/la10_15_readjust 
Re-adjust LA10->15 conversion
 2020-09-15 11:59:07 +02:00
Alex Voinea
6bc59197ad
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION 2020-09-12 08:28:13 +03:00
Alex Voinea
c158259970
Remove unused where C++ alternative can be used 2020-09-11 20:04:06 +03:00
Alex Voinea
44b1b1c219
More macros 2020-09-11 18:48:44 +03:00
Alex Voinea
c3abd4ffe6
Remove io_atmega2560.h and some more macros 2020-09-11 17:43:38 +03:00
Alex Voinea
eb007c35d2
Macros initial 2020-09-11 16:12:49 +03:00
Alex Voinea
160af0a624
Printer capabilities 2020-09-11 16:11:28 +03:00
3d-gussner
fef5b02010 Tag as community contribution 2020-09-09 12:34:25 +02:00
3d-gussner
4d3aa1b59a Merge remote-tracking branch 'upstream/MK3' into MK3_Dutch 
Merge upstream/MK3
Fix conflicts
update Dutch translation
 2020-09-09 11:37:35 +02:00
DRracer
f145769e98
Merge pull request #2807 from leptun/MK3_Polling 
M220 M221 polling of values
 2020-09-09 10:25:36 +02:00
DRracer
763d2d9849
Merge pull request #2806 from leptun/MK3_PRUSA_SN 
Make the serial number available to the user
 2020-09-09 09:54:29 +02:00
DRracer
a0420c7928
Merge pull request #2619 from 3d-gussner/MK3_G21 
Add dummy G21 to prevent UNKOWN warnings in serial
 2020-09-09 09:22:07 +02:00
DRracer
b82ee3fc06
Merge pull request #2811 from leptun/MK3_fastio_timer_patch 
Fix fastio extra parenthesis
 2020-09-09 08:57:37 +02:00
DRracer
a2db9e8f6b
Merge pull request #2585 from leptun/MK3_FEEDRATE 
🐛♻️ Update the feedrate percentage before drawing the screen
 2020-09-09 08:56:46 +02:00
Yuri D'Elia
26e900896a Re-adjust LA10->15 conversion 
After fixing some LA15 issues, the strenght of LA15 increased.
As such, re-adjust the conversion factor so that:

Start K10 => 0.01 (previous minimum was K15)
PLA   K30 => 0.05 (was 0.07, optimal 0.045-0.06)
PETG  K45 => 0.08 (was 0.13, optimal 0.07-0.11 depending on material/temp)
 2020-09-07 21:44:34 +02:00
Alex Voinea
7ac16d5f04
Menu view return patch 2020-09-07 19:42:53 +03:00
D.R.racer
02891f6bb8 Version changed (3.9.1-RC1 build 3512) 2020-09-02 11:56:53 +02:00
Alex Voinea
3e7bba54e0
SD card released message 2020-08-28 17:32:07 +03:00
Yuri D'Elia
e37cdab38f PAT9125_I2C: accept either NACK or ACK in receive 
Both would be technically correct.
 2020-08-25 12:15:55 +02:00
Yuri D'Elia
d8a8837938 Document the 3 possible modes 2020-08-25 11:32:05 +02:00
Alex Voinea
1659f61dd5
Fix fastio extra parenthesis 2020-08-21 10:51:46 +03:00
Yuri D'Elia
30e7b777e0 Error-out with PAT9125_SWSPI (not fully implemented) 
.. and likely will never was/be.
 2020-08-20 22:13:13 +02:00
Yuri D'Elia
7f425120f0 Strip down the TWI code 
- Only implement a single syncronous read/write function to read a byte,
  since that's all we need currently
- Implement a compact IR_SENSOR probe for PAT9125
- Saves 242 bytes compared to PAT9125_SWI2C
 2020-08-20 22:13:04 +02:00
DRracer
772844678f
Merge pull request #2809 from leptun/PFW-1134-ALTFAN_KILLSWITCH 
Pfw 1134
 2020-08-20 15:42:03 +02:00
Yuri D'Elia
240dc1132e Include initial implementation based on Arduino's twi 2020-08-20 15:34:46 +02:00
Yuri D'Elia
502bc8c72d Isolate more pat9125 code 
Remove probing from Marlin_main and move it into pat9125_probe so that
it can support the various variants.
 2020-08-20 15:34:46 +02:00
3d-gussner
90c36a5887
Update ALTFAN eeprom documentation 
EEPROM_ALTFAN_OVERRIDE and EEPROM_EXPERIMENTAL_VISIBILITY are compared to 0xFF in the code that's why I keep the uint8.
 2020-08-20 15:14:39 +02:00
Alex Voinea
2c2926882a
Don't switch unnecessarily. Also "\n" the ";S" request 2020-08-18 19:29:18 +03:00
Alex Voinea
8d9dc73d1b
Fix compile error 
fix compile


Fix compile error
 2020-08-12 17:25:49 +03:00
Alex Voinea
5530b99882
Reboot after factory reset 2020-08-12 12:46:35 +03:00
Alex Voinea
6b853a4cc3
Auto-detect ALTFAN after fw. update 2020-08-12 12:19:08 +03:00
Alex Voinea
96435ad084
Move experimental menu to HW setup 2020-08-12 08:48:12 +03:00