Lukas Matena
645f13a0ae
Drain holes are now saved in ModelObject
...
Internal changes in GLGizmoHollow.cpp
2019-11-08 14:05:56 +01:00
tamasmeszaros
4b08865809
hollowing params renamed, filtering generalized
2019-11-08 09:21:30 +01:00
bubnikv
588734c7b3
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2019-11-07 14:35:50 +01:00
bubnikv
f2dd49a905
Merged pull request "Gyroid improvements" #2730
...
by @supermerill and @wavexx
WIP: The function Fill::connect_infill() is being rewritten
to utilize spatial structures wherever possible for lower CPU load
and less dynamic memory allocation.
2019-11-07 14:28:30 +01:00
Lukas Matena
9836533cb3
Hollowing task triggered by the gizmo now spawns a UI job to not block the UI thread
...
The AABB tree calculation is still done in the UI thread, so it gets blocked for some time
2019-11-07 14:25:03 +01:00
tamasmeszaros
ad0a38e419
Follow up, unify boost::thread usage.
2019-11-07 12:58:18 +01:00
tamasmeszaros
67f55d3b23
Change std::async to boost thread in Plater::priv::Job
2019-11-07 12:09:04 +01:00
tamasmeszaros
bc3d22348a
Hollowing params: accuracy and smoothness
2019-11-07 09:34:34 +01:00
Enrico Turri
1e8aa54559
ENABLE_THUMBNAIL_GENERATOR -> Added ENABLE_THUMBNAIL_GENERATOR_DEBUG (disabled)
2019-11-07 09:01:28 +01:00
tamasmeszaros
a82f1268f3
Hollowed interior is now visible in preview
2019-11-06 14:26:15 +01:00
tamasmeszaros
bdf6f7342e
Hollowing step in SLAPrint process, PrintConfig params added.
2019-11-06 13:38:43 +01:00
Enrico Turri
41dadfdfcf
ENABLE_THUMBNAIL_GENERATOR -> Generate thumbnails using GLEW_EXT_framebuffer_object on graphic cards supporting it
2019-11-05 14:50:58 +01:00
tamasmeszaros
4d8631fef6
Merge branch 'tm_openvdb_integration' into lm_tm_hollowing
2019-11-05 14:48:44 +01:00
tamasmeszaros
07fb9f6559
Add oversampling and gaussian filter to hollowing.
...
* Additional steps hollowing and drilling in SPAPrint
* Remove SLABoilerPlate.hpp as it was empty.
2019-11-05 14:48:00 +01:00
Lukas Matena
eaf815ca4b
Merge branch 'lm_hollow_gizmo' into lm_tm_hollowing
2019-11-05 14:41:06 +01:00
Lukas Matena
013e613221
Hollowing gizmo can now actually trigger the hollowing and render result
2019-11-05 14:40:22 +01:00
Enrico Turri
d8dca69d60
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-11-05 13:58:13 +01:00
bubnikv
612e45e783
std::exchange not supported by C++11.
2019-11-05 11:46:05 +01:00
bubnikv
7a7183383f
Merge branch 'master' of https://github.com/BryanSmithDev/PrusaSlicer into BryanSmithDev-master
2019-11-05 11:37:40 +01:00
bubnikv
f75c022445
Reworked pull request
...
Centering model on bed, using bed shape from config (if available). #2424
thanks @luketaverne
2019-11-05 11:16:55 +01:00
Lukas Matena
7542580ac1
Merge branch 'tm_openvdb_integration' into lm_hollow_gizmo
2019-11-05 11:16:51 +01:00
bubnikv
e1c6bd174a
Fixed missing include.
2019-11-05 11:14:00 +01:00
bubnikv
b295bc22db
Adaptive elephant foot compensation: Improvement of the variable
...
offset regularization.
2019-11-05 10:45:14 +01:00
Lukas Matena
3fe160e60a
Added possibility to change hole height and taper
...
The parameters are yet not saved in ModelObject and they are common for all holes
2019-11-05 10:17:30 +01:00
Lukas Matena
04bcdff110
Added new hollowing gizmo
...
Basically just copied SLA support gizmo and removed all functionality that will not be needed
2019-11-05 10:17:27 +01:00
tamasmeszaros
d9d11e5686
Add additional parameters to openvdbutils
2019-11-05 09:43:42 +01:00
Enrico Turri
76377ee0fe
ENABLE_THUMBNAIL_GENERATOR -> Export thumbnails to gcode as png data in lines with max 80 characters length
2019-11-04 15:38:15 +01:00
tamasmeszaros
7808d09d06
SLA Contour3D expanded with conversions supporting quads.
2019-11-04 14:33:29 +01:00
Enrico Turri
065cdd878e
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-11-04 14:29:03 +01:00
Enrico Turri
f5bef3707f
Added missing include
2019-11-04 14:28:18 +01:00
Enrico Turri
8b8b6c1821
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-11-04 14:00:36 +01:00
Enrico Turri
64d5ac0d20
ENABLE_THUMBNAIL_GENERATOR -> Export thumbnails to gcode: max length of gcode lines set to 80 characters
2019-11-04 14:00:26 +01:00
Stephan
c37cdb6585
* fix compile error and removed json includes
2019-11-04 12:53:48 +01:00
Stephan Reichhelm
3321ae7f13
+ add FlashAir support for host upload
2019-11-04 12:53:48 +01:00
Enrico Turri
3d450df680
ENABLE_THUMBNAIL_GENERATOR -> Transparent background for thumbnails saved into .3mf
2019-11-04 11:59:23 +01:00
bubnikv
2399570950
Only enable Elphant foot compensation if printing directly
...
on the print bed (raft is disabled).
2019-11-04 11:34:33 +01:00
bubnikv
4c735192ef
Bugfixes of the new adaptive elephant foot compensation.
2019-11-04 11:26:36 +01:00
Enrico Turri
c34232214d
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-11-04 11:13:19 +01:00
bubnikv
bb8d59391f
Fixed missing include
2019-11-01 21:13:53 +01:00
bubnikv
db97610821
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2019-11-01 19:59:22 +01:00
bubnikv
a72ac57fab
adaptive elpehant foot compensation, fixing
...
GH issues #1757 #2085 #2132 #2423 #2502 #2156 #2773 #2828 #2998 #3001
2019-11-01 19:59:09 +01:00
tamasmeszaros
a8a5a884f9
Add OpenVDBUtils into libslic3r, hollwing tests in libslic3r_test
2019-11-01 15:31:26 +01:00
tamasmeszaros
59c128d9fd
Fix broken partial arrange
2019-11-01 15:13:05 +01:00
Enrico Turri
6663fc7018
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-11-01 12:26:43 +01:00
Enrico Turri
f94f75d481
ENABLE_THUMBNAIL_GENERATOR -> Render thumbnails using shader
2019-11-01 12:19:27 +01:00
Vojtech Kral
d729315de3
Fix g-code export to permissionless filesystems
...
Fix #2521
Fix #3102
2019-11-01 10:54:55 +01:00
Enrico Turri
bf8fcabb29
ENABLE_THUMBNAIL_GENERATOR -> Use orthographic camera when rendering thumbnails
2019-10-31 17:03:33 +01:00
Enrico Turri
418634a677
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-10-31 16:41:03 +01:00
Enrico Turri
636e446da1
ENABLE_THUMBNAIL_GENERATOR -> Changes to zoom factor and centering algorithm when rendering thumbnails
2019-10-31 16:40:38 +01:00
Lukas Matena
d632d91e79
WipeTower.cpp: The M220 B/R gcode is only emitted for Marlin firmware flavor
...
The extended gcode is now only supported by Prusa (https://github.com/prusa3d/PrusaSlicer/issues/3114 )
A pull request https://github.com/MarlinFirmware/Marlin/pull/15739 aims to extend the gcode in upstream Marlin as well
2019-10-31 15:08:20 +01:00
tamasmeszaros
2165537fa5
Do some hollowing finally.
2019-10-31 14:36:33 +01:00
Enrico Turri
8f180a0cc1
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-10-30 11:47:21 +01:00
bubnikv
f60fbecd3d
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2019-10-30 10:19:00 +01:00
bubnikv
ba39ee6f12
EdgeGrid::signed_distance_edges() to provide the pedal point.
...
Removed 20_print.t test.
2019-10-30 10:18:56 +01:00
Enrico Turri
2cb1edeba7
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-10-30 10:10:10 +01:00
Enrico Turri
f6453aab1b
ENABLE_THUMBNAIL_GENERATOR -> Fixed potential race condition when generating thumbnails
2019-10-30 10:09:58 +01:00
Enrico Turri
b3f53c96c7
Fixed update of 3D preview layout after changing printer after slicing
2019-10-30 08:28:40 +01:00
Enrico Turri
47dfe60f0e
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-10-29 14:47:59 +01:00
Enrico Turri
a7b4b232e9
ENABLE_THUMBNAIL_GENERATOR -> Use multisampling when generating thumbnail using off-screen framebuffer
2019-10-29 14:45:15 +01:00
YuSanka
52538b93c2
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2019-10-29 13:09:19 +01:00
YuSanka
ffcf25e5cb
Fix for #3108
2019-10-29 13:07:57 +01:00
Lukas Matena
8b5561aec7
Fixed several warnings
2019-10-29 10:40:34 +01:00
Enrico Turri
3ff3eed2b1
ENABLE_THUMBNAIL_GENERATOR -> Use off-screen framebuffer to render the thumbnail on graphic cards supporting it
2019-10-29 10:27:51 +01:00
Enrico Turri
f36dd833d2
ENABLE_THUMBNAIL_GENERATOR -> Reduce thumbnail size if exceeding 3D scene canvas size
2019-10-29 07:32:15 +01:00
Enrico Turri
2896e12a46
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-10-29 07:09:07 +01:00
bubnikv
9e8ce66f70
Fix / improvement of unit tests.
2019-10-25 19:06:40 +02:00
bubnikv
f8dc74374c
Ported various clipper unit tests from Perl to C++,
...
the clipper Perl unit tests were removed.
2019-10-25 17:07:55 +02:00
Enrico Turri
24aed8eb71
ENABLE_THUMBNAIL_GENERATOR -> Added missing include
2019-10-25 14:32:31 +02:00
Enrico Turri
bab4f51bc8
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-10-25 13:59:27 +02:00
Enrico Turri
2d5c28d6d1
ENABLE_THUMBNAIL_GENERATOR -> Allow for multiple thumbnails into gcode and sl1 files
2019-10-25 13:59:13 +02:00
bubnikv
4ae0f3a61c
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2019-10-25 13:34:55 +02:00
bubnikv
5e8572a196
New functions for variable offsets of polygons / expolygons.
...
Test cases for the above.
Improvements of older test cases.
2019-10-25 13:34:37 +02:00
tamasmeszaros
bcc2c21d5f
Disable OpenVDB until deps get updated
2019-10-25 13:23:05 +02:00
tamasmeszaros
deda712e20
Merge branch 'tm_openvdb_integration'
2019-10-25 13:16:26 +02:00
tamasmeszaros
4554da29ab
Add OpenVDB to dependencies
...
* Add Linux openvdb integration
* Add Mac openvdb integration and enable in ALL
* Create openvdb sandbox to test integration.
* Additional fixes in the patches
* Remove slabasebed sandbox as it has no relevance now
* Provide FindOpenVDB module and fix build issues
2019-10-25 13:15:21 +02:00
Lukas Matena
62c90abbc0
Fix of SPE-1041: set_state function for gizmos is called even if they are turned on/off by the undo/redo action
2019-10-25 13:10:33 +02:00
Enrico Turri
de60b40347
ENABLE_THUMBNAIL_GENERATOR -> Thumbnail data saved into gcode using base64 encoding + debug code to extract thumbnails from gcode
2019-10-25 12:18:10 +02:00
Enrico Turri
843251c91f
ENABLE_THUMBNAIL_GENERATOR -> Do not render wipe tower into thumbnail
2019-10-25 09:04:58 +02:00
Enrico Turri
982ed95a35
ENABLE_THUMBNAIL_GENERATOR -> Save thumbnail size into gcode
2019-10-25 08:57:13 +02:00
Enrico Turri
f7d3cf063b
ENABLE_THUMBNAIL_GENERATOR -> Added a comment
2019-10-25 08:19:02 +02:00
Enrico Turri
296d79abf7
ENABLE_THUMBNAIL_GENERATOR -> Fixed thumbnail generation for SLA and 3mf
2019-10-24 15:56:10 +02:00
Enrico Turri
1baa333663
ENABLE_THUMBNAIL_GENERATOR -> Fixed flickering of 3D view when generating thumbnail
2019-10-24 12:30:19 +02:00
Enrico Turri
d01532f4c6
ENABLE_THUMBNAIL_GENERATOR -> Removed obsolete files
2019-10-24 12:11:24 +02:00
Enrico Turri
29fd0ef7c6
ENABLE_THUMBNAIL_GENERATOR -> Refactoring to simplify code
2019-10-24 12:09:09 +02:00
Enrico Turri
a417da8fea
ENABLE_THUMBNAIL_GENERATOR -> Fixed volumes visibility test to render them into thumbnail
2019-10-24 11:08:39 +02:00
Enrico Turri
a1f2ecb285
ENABLE_THUMBNAIL_GENERATOR -> Fixed color of non printable volumes into thumbnail
2019-10-24 10:38:30 +02:00
Enrico Turri
6d5572ae47
ENABLE_THUMBNAIL_GENERATOR -> Code cleanup
2019-10-24 10:25:40 +02:00
Enrico Turri
5609f53797
ENABLE_THUMBNAIL_GENERATOR -> Add thumbnail data into gcode output
2019-10-24 10:06:31 +02:00
Enrico Turri
4517fcd997
ENABLE_THUMBNAIL_GENERATOR -> Add file Metadata/thumbnail.png into 3mf output
2019-10-24 09:20:33 +02:00
Enrico Turri
540253f676
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-10-24 08:46:58 +02:00
Enrico Turri
ad0a9cf439
ENABLE_THUMBNAIL_GENERATOR -> Add file thumbnail/thumbnail.png into sla output
2019-10-24 08:46:39 +02:00
tamasmeszaros
77c52b748c
Zipper made available for modification after RasterWriter finishes.
2019-10-23 17:32:17 +02:00
Enrico Turri
16fd2820db
ENABLE_THUMBNAIL_GENERATOR -> WIP: Added missing include and preparation for adding thumbnail to exported sla archive files
2019-10-23 16:01:23 +02:00
bubnikv
18bbefcd61
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2019-10-23 15:07:53 +02:00
bubnikv
cf94482731
Fix of Voronoi debug output.
2019-10-23 15:07:41 +02:00
Enrico Turri
4d1153c866
ENABLE_THUMBNAIL_GENERATOR -> WIP: Refactoring and preparation for adding thumbnails to exported gcode and 3mf files
2019-10-23 13:31:24 +02:00
Enrico Turri
959ef9a9ec
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-10-23 08:08:40 +02:00
tamasmeszaros
9f9a40100f
Solve build fail in RelWithDebInfo config with several imported targets.
2019-10-22 16:32:57 +02:00
Enrico Turri
1809497c38
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-10-22 16:03:27 +02:00
Enrico Turri
32a42f2808
Added tech ENABLE_THUMBNAIL_GENERATOR -> 1st installment of generation of thumbnail from plater (WIP)
2019-10-22 16:02:31 +02:00