enricoturri1966
689c8691ee
Another code cleanup
2020-08-27 10:15:07 +02:00
enricoturri1966
af30a3ab7e
Code cleanup
2020-08-27 09:13:30 +02:00
enricoturri1966
88b6835258
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-27 08:00:45 +02:00
bubnikv
41f474a884
Fixed performance issues when adding / removing Presets into PresetCollection.
...
This improves application startup time by 25-33%.
2020-08-26 21:51:50 +02:00
enricoturri1966
ba9c3a74ed
GCodeViewer -> 1st iteration of rendering of extrude toolpaths as solid
2020-08-26 15:29:33 +02:00
enricoturri1966
e4f767b2ed
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-24 15:11:15 +02:00
Lukas Matena
c51a45ee0f
Drainholes are saved elevated for 3MF compatibility
...
This is a follow-up of previous commit
2020-08-24 08:11:12 +02:00
Lukas Matena
a95509ce36
Changed internal coordinates of drain holes
...
Drain holes reference position was saved slightly above the mesh to avoid problem when the hole is placed on flat or nearly flat surface
The depth of the hole was internally bigger than what the user has set to compensato for it
However, this leads to problem with scaling and makes reprojection of the holes on the mesh complicated
This commit changes the reference point to the point on the mesh and the extra elevation is handled when rendering and drilling the hole.
The change is reflected in 3MF drain holes versioning so that old 3MFs are loaded correctly.
Reprojection on the mesh after reload from disk/fix through netfabb has been enabled.
2020-08-24 08:11:12 +02:00
enricoturri1966
34759f9a70
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-21 11:10:27 +02:00
enricoturri1966
7a093b08fd
GCodeViewer -> Show printbed model and texture for system printers detected when loading gcode files produced by PrusaSlicer
2020-08-21 10:59:07 +02:00
Lukas Matena
739cd2a4a2
Fixed several indentation-related warnings
2020-08-19 17:15:01 +02:00
YuSanka
15545bbd90
Merge remote-tracking branch 'origin/master' into ys_unsaved_changes
2020-08-19 15:44:24 +02:00
enricoturri1966
af200e47c1
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-19 08:18:23 +02:00
tamasmeszaros
5052149b81
Fix build on msvc
2020-08-18 13:45:18 +02:00
enricoturri1966
bd4e4535f9
GCodeProcessor -> Calculate per layer time estimate
2020-08-18 12:37:07 +02:00
Lukas Matena
6db1e5ab8f
Slight code cleanup
2020-08-18 12:00:26 +02:00
Lukas Matena
97bc092cce
Renamed FacetSupportType to EnforcerBlockerType
...
So it's not misleading if we use it for seam painting
2020-08-18 12:00:26 +02:00
tamasmeszaros
4ef52af906
Add dedicated tests for support point generation
2020-08-18 11:41:14 +02:00
enricoturri1966
ca27d7296f
Fixed build when ENABLE_GCODE_VIEWER is disabled
2020-08-18 08:27:07 +02:00
enricoturri1966
c81d87b470
Code cleanup
2020-08-17 15:59:36 +02:00
enricoturri1966
73603e4937
GCodeProcessor -> Do not export width tags to gcode
2020-08-17 14:37:26 +02:00
enricoturri1966
b156153405
GCodeViewer -> Use rounded values for toolpaths height, width and volumetric rate to reduce the number of generated paths
2020-08-17 13:07:13 +02:00
enricoturri1966
5b579aee9a
GCodeProcessor -> Extract toolpaths width from gcode moves
2020-08-17 10:54:41 +02:00
enricoturri1966
f2d02faef4
GCodeProcessor -> Added debug code to check toolpaths data extracted from gcode, as mm3 per mm, height and width
2020-08-17 10:06:41 +02:00
YuSanka
618f04717f
Unsaved Changes : improvement for the GUI_App::check_unsaved_changes()
...
Added use of UnsavedChangesDialog
2020-08-14 18:17:16 +02:00
enricoturri1966
6a603eed25
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-14 11:45:54 +02:00
tamasmeszaros
add3894e8c
Add reserve_vector to libslic3r.h to be globally usable.
2020-08-13 15:42:31 +02:00
tamasmeszaros
7158690ddd
Fix build on win and rpi
2020-08-13 15:09:22 +02:00
tamasmeszaros
1003c32f76
Merge branch 'tm_minor_refactor'
2020-08-13 14:36:47 +02:00
tamasmeszaros
929cea59f3
replace ccr_::enumerate with flexible for_each
...
enumerate is unusual and would only work effectively with random access iterators
this for_each takes advantage of tbb blocked_range
replace ccr_::enumerate with flexible for_each
enumerate is unusual and would only work effectively with random access iterators
this for_each takes advantage of tbb blocked_range
2020-08-13 14:35:14 +02:00
tamasmeszaros
9486901b93
Minor change to SLAPrinter interface
2020-08-13 14:35:14 +02:00
enricoturri1966
b80bde11f3
GCodeProcessor -> Extract toolpaths height from gcode moves
2020-08-13 12:51:50 +02:00
enricoturri1966
7be5860908
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-12 15:07:31 +02:00
Lukas Matena
6d4bb10ec5
Fix of custom supports: object offset for Clipper was incorrectly accounted for
2020-08-12 11:28:30 +02:00
Lukas Matena
fd93d9768d
Fixes of two crashes in paint-on supports
2020-08-12 11:08:10 +02:00
Vojtech Bubnik
12f43736bd
Fix of Support generator debugging functions after some refactoring
2020-08-12 10:51:15 +02:00
enricoturri1966
4ca026d4b6
ENABLE_GCODE_VIEWER -> More general drag and drop for .gcode files
2020-08-11 15:44:32 +02:00
enricoturri1966
5a0e048079
ENABLE_GCODE_VIEWER -> Drag and drop .gcode files into gcode viewer
2020-08-11 14:23:47 +02:00
enricoturri1966
5882c121cc
GCodeProcessor -> Fixed time estimate for stealth mode
2020-08-11 11:12:30 +02:00
enricoturri1966
dea641183c
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-10 14:22:46 +02:00
enricoturri1966
6ed2cb661d
GCodeProcessor -> Export remaining time (lines M73) to gcode
2020-08-10 14:22:05 +02:00
YuSanka
f9e47b2702
Code refactoring: AppConfig.cpp(hpp) are removed from the GUI to libslic3r
2020-08-08 17:03:20 +02:00
enricoturri1966
64001c0fe5
GCodeProcessor -> Fixed export of estimated time to gcode filename
2020-08-07 15:30:08 +02:00
YuSanka
a6dc3d37f5
Merge remote-tracking branch 'origin/master' into ys_ph_printers
2020-08-06 17:02:48 +02:00
Lukas Matena
41b1dc3d80
Fix of custom supports 3MF loading
...
Multiple-part objects were not handled correctly
2020-08-06 14:08:05 +02:00
enricoturri1966
2aa1c2776c
GCodeViewer -> Estimated printing times shown in the legend
2020-08-06 10:15:34 +02:00
enricoturri1966
8fc5be7e4f
Refactoring to allow to quickly build the various options to show the estimated printing time in gcode viewer scene
2020-08-05 15:43:46 +02:00
enricoturri1966
25c3552555
Fixed conflicts after merge with master
2020-08-04 09:58:19 +02:00
tamasmeszaros
0614d6d4a8
Remove leftover junk comments
2020-08-03 19:07:30 +02:00
tamasmeszaros
f3c0bf46d4
finish optimizer interface and remove commented code
2020-08-03 19:06:57 +02:00
tamasmeszaros
927b81ea97
Working small-to-normal support merging
...
Fixed fatal bug with anchors for mini supports
Make the optimization cleaner in support generatior
Much better widening behaviour
Add an optimizer interface and the NLopt implementation into libslic3r
New optimizer based only on nlopt C interfase
Fix build and tests
2020-08-03 19:05:30 +02:00
tamasmeszaros
8cb115a035
Add possible manipulation of small support diameter.
2020-08-03 19:05:30 +02:00
tamasmeszaros
7c655b5d7e
Fix junction made below ground level.
2020-08-03 19:05:30 +02:00
tamasmeszaros
1eec6c473c
Rename EigenMesh3D to IndexedMesh and SupportConfig to SupportTreeConfig
2020-08-03 19:05:30 +02:00
tamasmeszaros
645fbed88b
Make compile time support tree conf params constexpr
2020-08-03 19:05:30 +02:00
tamasmeszaros
f19b3a2344
Id-s put in a base class for support tree primitives
2020-08-03 19:05:30 +02:00
tamasmeszaros
301a168b89
Fix bugs and non working tests
...
Fix failing tests
Try to fix build on windows
Try to fix failng tests on Mac
2020-08-03 19:05:30 +02:00
tamasmeszaros
184f64f828
Separate support tree routing and meshing, remove Common.hpp/.cpp .
...
* Remove Common.hpp and Common.cpp, move things into their respective modules in sla.
2020-08-03 19:05:30 +02:00
tamasmeszaros
2ff04e6f68
Bugfixes for support generator
...
* Fix support heads floating in air
* Fix failing tests for the bridge mesh intersection
* Fix failing assertions
WIP refactoring support tree gen, as its a mess.
2020-08-03 19:05:30 +02:00
tamasmeszaros
ed460a3e7e
Remove the headless
step of support support tree gen
2020-08-03 19:05:30 +02:00
tamasmeszaros
7b6565abeb
Improvements on mini pillars
2020-08-03 19:05:30 +02:00
tamasmeszaros
67b61c23f7
Remove the discard region for bottom points removal.
...
This was a workaround for small supports not to end up in the middle of the gap between the pad and the object. The issue needs to be solved at the support generation.
2020-08-03 19:05:30 +02:00
tamasmeszaros
0622322146
Create smaller supports in problematic areas with established strategies
...
Completely remove the concept of CompactBridge.
Replace it with Heads having the same back radius as front radius.
Try to apply the same rules for mini supports as in the route_to_model step.
Increased accuracy of bridge_mesh_intersect shot from support points
Refining mini support integration
2020-08-03 19:05:30 +02:00
tamasmeszaros
38239f09e3
Fix remove_bottom_points function
2020-08-03 19:03:02 +02:00
David Kocik
b3f8ae5ca7
Notifications & warning dialog
...
notifications
dialog with warnings produced by slicing is shown before exporting
2020-08-03 15:49:25 +02:00
enricoturri1966
0840b2328a
Tech ENABLE_GCODE_VIEWER_AS_STATE set as default
2020-08-03 15:00:19 +02:00
enricoturri1966
0eb6ba96d6
Fixed conflicts after merge with master
2020-08-03 14:17:40 +02:00
enricoturri1966
5249b3e018
ENABLE_GCODE_VIEWER -> Estimated print time statistics moved from PrintStatistics to GCodeProcessor
2020-08-03 13:57:10 +02:00
enricoturri1966
757572b760
Tech ENABLE_LAYOUT_NO_RESTART set as default
2020-08-03 11:08:17 +02:00
enricoturri1966
1532920d81
GCodeProcessor -> Extended import of config data from gcode saved by PrusaSlicer
2020-08-03 08:46:32 +02:00
enricoturri1966
534e8bb909
ENABLE_GCODE_VIEWER -> Export to gcode layer z and layer height at each layer change
2020-07-30 13:49:57 +02:00
enricoturri1966
0348986bda
Follow-up of 9d4344a78c
-> ensure printbed always rendered as custom in gcode preview mode
2020-07-29 14:20:01 +02:00
enricoturri1966
9d4344a78c
GCodeProcessor/GCodeViewer -> Extract bed shape from gcode files generated by PrusaSlicer
2020-07-29 12:47:42 +02:00
enricoturri1966
16e282110d
GCodeProcessor -> Load config data from gcode files generated by PrusaSlicer
2020-07-29 11:13:48 +02:00
enricoturri1966
11cf9a87f1
GCodeProcessor -> Calculate mm3 per mm on the fly
2020-07-29 10:04:10 +02:00
YuSanka
3c3e463f50
Merge remote-tracking branch 'origin/master' into ys_ph_printers
2020-07-28 14:14:16 +02:00
YuSanka
68ae95509f
Improved InfoMsg for a delete preset:
...
* Now we show a list of printers name with selected preset
+ Added a edit_button for the editing of the physical printer fro the Settings Tab
+ Show whole list of the loaded presets with "Print host upload"
2020-07-28 12:43:26 +02:00
enricoturri1966
d9228ee82c
GCodeProcessor -> Human readable extrusion roles in gcode
2020-07-28 09:48:55 +02:00
enricoturri1966
14366800e2
GCodeProcessor -> Added parsing of 3d part generated gcodes
2020-07-27 15:45:29 +02:00
enricoturri1966
48ae8dc9a2
Modal estimated printing time dialog
...
Fixed conflicts after merge with master
2020-07-27 14:53:17 +02:00
Lukas Matena
248fba82a4
TriangleSelector: 3MF loading and saving
2020-07-24 17:47:16 +02:00
Lukas Matena
7ddb64783b
TriangleSelector: edge limit is derived from cursor size
2020-07-24 17:47:16 +02:00
Lukas Matena
74a1aeff8e
TriangleSelector: bugfix - backend did not correctly account for mirrorring
2020-07-24 17:47:16 +02:00
Lukas Matena
5a1d9aee15
TriangleSelector: Fix of a macOS crash
...
Calling reset() from constructor relied on uninitialized variable
2020-07-24 17:47:16 +02:00
Lukas Matena
afb5d929c4
TriangleSelector: Schedule restarting background process after edit
2020-07-24 17:47:16 +02:00
Lukas Matena
3b91d11ddf
TriangleSelector: backend is aware of divided triangles
2020-07-24 17:47:16 +02:00
Lukas Matena
0756a7e4b3
TriangleSelector: 'Select by angle' and 'reset selection' functions fixed
2020-07-24 17:47:16 +02:00
Lukas Matena
6baff45759
TriangleSelector: Separated frontend/backend, support of multiple volumes, etc.
2020-07-24 17:47:16 +02:00
Lukas Matena
953d1417a0
TriangleSelector: draft of interface
2020-07-24 17:47:16 +02:00
YuSanka
a4c12b90f1
PhysicalPrinterCollection: Use select_preset() instead of select_preset_by_name()
...
+ changed signature for select_preset()
2020-07-23 12:17:18 +02:00
YuSanka
631b15b7d3
Merge remote-tracking branch 'origin/master' into ys_ph_printers
2020-07-22 15:53:31 +02:00
enricoturri1966
8e679d8b75
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-07-22 10:37:35 +02:00
enricoturri1966
8f90fe1609
Code cleanup and small refactoring
2020-07-22 10:37:25 +02:00
YuSanka
6d28d68e4a
PhysicalPrinter : Implemented synchronizations from user printer profiles with "Print Host upload" information to the new physical printers
2020-07-22 09:24:12 +02:00
rongith
435355adfe
Temporary ironing icon to avoid crashes on GTK
...
Ironing type and spacing can be set per-object
2020-07-22 09:11:48 +02:00
enricoturri1966
6bbc7c048f
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-07-21 16:01:27 +02:00
bubnikv
f7ceffb46e
Fixed back-end warning infrastructure: The Print / PrintObject
...
should have been derived from ObjectBase, not from ObjectID.
2020-07-21 15:33:36 +02:00
enricoturri1966
5aadfe3d1c
Fixed conflicts after merge with master
2020-07-21 09:48:41 +02:00
YuSanka
f138978fe7
Merge remote-tracking branch 'origin/master' into ys_ph_printers
2020-07-21 09:47:29 +02:00
enricoturri1966
dc59e86d2c
ENABLE_GCODE_VIEWER -> Partial refactoring in preparation for removal of old time estimator
2020-07-21 09:34:54 +02:00