Commit Graph

3007 Commits

Author SHA1 Message Date
Vojtech Bubnik
fcb714cd24 Added a single perimeter to the first layer of support or raft.
Fixes [Request] Add optional perimeter to raft #756
Fixes First support layer does not stick to bed #2101

New parameters raft_first_layer_density and raft_first_layer_expansion
to influence the 1st layer of raft or support.
Fixes Allow to disable raft under support structures. #3772
Fixes raft is larger than necessary #2568
Fixes Supports on the build plate should have a solid bottom interface for better adhesion #1165

Changed the 1st layer infill to rectilinear even for soluble materials.
Fixes first layer of support for multi filament support oddly spaced #1445
Fixes Full Soluble Materials interfacing into Models + Soluble material noise on Bed #684
2021-02-24 08:48:40 +01:00
Lukáš Hejl
77d007c484 Fixed calculation of a distance from begin of a contour in the avoid crossing perimeters.
The total length of a contour was incorrectly computed, which could cause the longest detour was selected instead of the shortest one in some cases.
2021-02-23 20:56:36 +01:00
Lukáš Hejl
dc576b0511 Fixed inner offset in the avoid crossing perimeters.
Minimum contour width was used incorrectly, which could lead to breaking contour to more disconnected polygons.
2021-02-23 20:43:34 +01:00
Lukáš Hejl
e123dfa8a4 Fixed wrong orientation of infill and gap-fill extrusion.
When an island contains exactly one infill ExtrusionEntity, this extrusion was oriented to maximize travel distance from the end of the previous extrusion of perimeters instead of minimizing it.
2021-02-23 20:07:40 +01:00
Vojtech Bubnik
d2c46025c7 Fix of Enforce support for first N layers has no effect #470 2021-02-23 15:31:21 +01:00
Vojtech Bubnik
055d2321e7 Trimming support base layer with brim.
Fixes Brim destroyed by support aka. Enable supports on top of brim #1156
Fixes Brim Priority/Support on Brim #713
Fixes Phantom Support columns interfere with brim #3396
Fixes false generation of brim when supports are used #3395

This is a work in progress, as the brim generator currently produces
different brim areas from what the support generator expects.
2021-02-23 14:43:47 +01:00
Vojtech Bubnik
8ba230db9f Fix of Paint on support ignores some paints. #5948
When projecting the horizontal or nearly horizontal support enforcers or blockers
into object layers, the projection may fall on a layer above or below the layer
where it should in case the nearly horizontal support enforcer or blocker
triangles are intersecting the slicing plane of one of the object layers.
Due to numerical issues, projection of the support blocker or
enforcer triangles may not fall to the same side of the slicing plane
as when slicing the object. To make the projection robust, horizontal triangles
are newly projected to both the layer below and above if they are close
to the object slicing plane.
2021-02-23 12:30:15 +01:00
Vojtech Bubnik
7b52dc2324 Fixing build on gcc/clang 2021-02-22 19:43:18 +01:00
Vojtech Bubnik
032df7f18f PNGReadWrite: png::write_gray_to_file(), png::write_gray_to_file_scaled() 2021-02-22 18:07:27 +01:00
Vojtech Bubnik
3985d7bb81 Fixes Support Interface printed on air #2903
Fixes Supports generated loose in space #4874
Fixes Support Interface layers in midair #5016
2021-02-22 18:07:27 +01:00
Vojtech Bubnik
d2ca4563e8 Extended SVG::export_expolygons() with legend. 2021-02-22 18:07:27 +01:00
Lukas Matena
1904b7b904 Bugfix: custom seam did not work for triangles that were exactly vertical
The projection algorithm was originally made for custom supports, so vertical triangles
were not interesting. They are for seam. Instead of rewriting the algorithm and risking
more bugs, the edge case is detected and the triangle is tilted slightly.
2021-02-22 16:26:16 +01:00
Lukas Matena
bd2cbea202 Fix aligned seam when sequential printing is enabled 2021-02-22 16:26:16 +01:00
Vojtech Bubnik
ac97572cfe Fixed compiler warnings 2021-02-19 20:09:57 +01:00
Vojtech Bubnik
12d14eaa2f Fixing a constness issue of the preceding commit. 2021-02-19 19:00:43 +01:00
Vojtech Bubnik
cceaae84fb Silencing compiler warning in AGGRaster on Visual Studio 2021-02-19 18:57:45 +01:00
Vojtech Bubnik
fb7b995050 Improvements in FDM support generator:
Projection into a grid has been reworked to use the AGG rasterizer.
This fixes #5209 and #6067.
Also the raster is now being oversampled by maximum 8x8 samples
and the supports are only allowed to expand inside the cell.
This significantly reduces leakage of supports through object walls,
which fixes #5054.
2021-02-19 18:50:44 +01:00
enricoturri1966
c3a52f9b01 Tech ENABLE_RENDER_PATH_REFRESH_AFTER_OPTIONS_CHANGE set as default 2021-02-19 15:38:05 +01:00
enricoturri1966
bbf5c62af5 Follow-up of 9afaebac75 -> Fixed wrong gcode line numbers shown on preview horizontal slider when time estimation for silent mode is active 2021-02-19 14:12:49 +01:00
enricoturri1966
0a1448196b Tech ENABLE_NEW_NOTIFICATIONS_FADE_OUT set as default 2021-02-19 12:18:09 +01:00
enricoturri1966
d3daea2df8 Follow-up of 86d7e1fb90 - Fixed build warning on OsX 2021-02-18 15:35:38 +01:00
Lukáš Hejl
8f293f0cb5 Fixed unnecessary travels after calling the avoid crossing perimeters when the wipe is enabled.
When the avoid crossing perimeters was enabled, and the wipe was enabled, there were unnecessary travels in the opposite direction than the wipe travel.
2021-02-18 14:41:56 +01:00
enricoturri1966
86d7e1fb90 #5538 - Validation of custom g-code against gcode processor reserved keywords 2021-02-18 14:34:40 +01:00
enricoturri1966
aec39aaba6 Tech ENABLE_PREVIEW_TYPE_CHANGE set as default 2021-02-18 11:52:14 +01:00
enricoturri1966
7c3e3272aa Tech ENABLE_ARROW_KEYS_WITH_SLIDERS set as default 2021-02-17 17:21:06 +01:00
enricoturri1966
77be228b75 Tech ENABLE_DRAG_AND_DROP_FIX set as default 2021-02-17 14:52:58 +01:00
enricoturri1966
50c6fc1719 Tech ENABLE_TOOLPATHS_WIDTH_HEIGHT_FROM_GCODE set as default 2021-02-17 11:23:17 +01:00
Vojtech Bubnik
6ea5781709 Fix of Supports printed too slowly. #984
Processing of CoolingBuffer is newly staggered for support layers
until the 1st object layer above supports is received by CoolingBuffer.
2021-02-16 11:30:57 +01:00
enricoturri1966
9afaebac75 #5611 - Added option to show gcode line number on horizontal slider in preview 2021-02-16 10:07:05 +01:00
Vojtech Bubnik
32db22b77c Fix of Improve Support material adhesion by base type interface layers
under soluble supports. #5823
Implemented as a pull request #5903 by @spiky2021
and reworked.

commit c7993e619225553a2c4078787907b9ebbd9ac759
Author: spiky2021 <77010315+spiky2021@users.noreply.github.com>
Date:   Thu Feb 11 12:39:25 2021 +0100

    Base type interfaces for soluble interface supports

    At the moment soluble support material adhesion is weak due to sparse support layers under soluble support layers. I reported as issue #5823 with pictures, as well.
    I modified two methods to the SupportMaterial Class including their headers.
    The new methods add two base type interface layers to the support structure, in case the extruders are different and soluble support is choosen.
    Since it is conditionally activated, it in general doesn't need a GUI input. But a GUI option number of base interface layers may enabled users to adapt this feature to their needs.
    This is my second try to provide a pull request on this topic. Reset my fromer repository, because first I merged this and all other changes to my master and couldn't provide separate pull request anymore.
2021-02-15 18:07:44 +01:00
enricoturri1966
125fcd0623 Removed obsolete class GLCanvas3D::WarningTexture 2021-02-15 11:00:37 +01:00
Vojtech Bubnik
9c568a543c Improving 3MF import: checking for invalid data. 2021-02-12 16:46:49 +01:00
Vojtech Bubnik
92d0bc2cfd Fixing EdgeGrid after recent refactoring. 2021-02-11 13:40:15 +01:00
Vojtech Bubnik
bdd6685566 Reduction of dead code in FDM infill. 2021-02-11 12:24:10 +01:00
Vojtech Bubnik
9d479fcfb9 Make clang happy about the indentation 2021-02-11 12:06:12 +01:00
Vojtech Bubnik
7f95b280f0 FDM synchronization of front end with back end:
Fixed unnecessary invalidation of already calculated perimeters
if the infill density changes.
Fixed a race condition in invalidation of FDM regions.
2021-02-11 12:03:29 +01:00
enricoturri1966
cf260f6e44 #6006 - Gcode processor: fixed error prompt for gcode lines Tc, Tx, T? 2021-02-11 11:48:46 +01:00
tamasmeszaros
bf9f908685 Remove warning from zero division.
By changing the initial value of pixel size to 1. from 0.
2021-02-11 11:26:25 +01:00
Vojtech Bubnik
e026ed8718 Experimental: Switching all solid infills from Rectilinear to Monotonic
for regions with Monotonic top infill type.
This should likely implement Monotonic of last layer before ironing #4939
2021-02-11 11:15:14 +01:00
Vojtech Bubnik
039cf8f423 Fix of unnecessary splitting of solid fill surfaces.
This is a regression issue introduced in PrusaSlicer 2.3.0 with
the configurable anchoring.
2021-02-11 10:42:05 +01:00
Vojtech Bubnik
d39fd54e4f Fixing one more Win32 warning 2021-02-11 08:42:52 +01:00
Lukas Matena
2cb3754af4 Fixed a typo in TriangleSelector.cpp (probably not causing any bug, just a warning) 2021-02-11 07:32:22 +01:00
YuSanka
e664100bf6 SPE-1103 Added menu items for the conversation of the volumes from/to meters
Related to #4521
2021-02-10 20:34:05 +01:00
Vojtech Bubnik
8049dd1f72 Trying to fix the remaining OSX warnings 2021-02-10 19:07:09 +01:00
Vojtech Bubnik
05a6cfeaea Some more reduction of compiler warnings on MSVC 2021-02-10 18:04:16 +01:00
Vojtech Bubnik
db2d78ff21 Reduction on compiler warnings, mainly on MSVC.
Fix of the new gap_fill_enable flag: Take it into account when comparing
regions.
2021-02-10 17:29:07 +01:00
Vojtech Bubnik
6555b32f5c Squashed commit of the following:
commit 61b3ca0b4b4a0b4cfbbc706ede94ef7ccec4c91f
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date:   Wed Feb 10 15:42:27 2021 +0100

    Fix of fuzzy skin

commit d971ed51a5bb65e8bdfd326bc41b9d7ab2e20834
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date:   Wed Feb 10 14:12:51 2021 +0100

    CMake adjustment of MINIMUM_BOOST_VERSION

commit 5d8aa2c59ecf7e32456f2e43e07dedc7d24eb21c
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date:   Wed Feb 10 14:12:33 2021 +0100

    Fix of debug compilation after warning removal.

commit 5e339b3078f0c9d75b6fac28ed3c295ae9fbbef5
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date:   Wed Feb 10 14:11:34 2021 +0100

    Fuzzy Skin changes:
    1) Moved the parameters to region
    2) Removed experimental code.
    3) Allowed fuzzyfication of both outer perimeter and holes.
2021-02-10 16:02:43 +01:00
Ilya
f639c08caf
Added separate checkbox for gap filling (#5999)
* in dev

* moved to Advanced menu
2021-02-10 16:01:40 +01:00
Boleslaw Ciesielski
22b2ccc474 Fixes issue #5979 - NULL pointer crash in ModelObject::split()
ModelObject::split() expects a non-NULL new_objects vector where it adds pointers to the new models resulting from the split.
But in the CLI case the caller does not care about this and passes NULL which causes a crash. To fix the crash we could pass
a dummy vector but it turns out that we actually have a use for the results because we should assign a unique name to each
new model the same way as the GUI does. These names show up as comments in the gcode so this change makes the gcode produced
by the GUI and the CLI more similar and diffable.

@lukasmatena has amended the original commit by @combolek (pull request #5991) in order to avoid code duplication
2021-02-10 12:30:06 +01:00
Vojtěch Bubník
03c1045b46
Merge pull request #5740 from rsobik/patch-1
Use correct M204 command for acceleration
2021-02-10 11:12:15 +01:00
Vojtěch Bubník
b7ae342e8e
Merge pull request #5963 from wavexx/remove_undeeded_includes
Remove unneeded inclusion of boost::nowide
2021-02-10 10:43:56 +01:00
Vojtech Bubnik
f61119e02f Yet another clang compiler warning suppressed. 2021-02-09 20:04:11 +01:00
Vojtech Bubnik
20456b45e5 Fix of the previous commit (fixing warnings) 2021-02-09 19:46:09 +01:00
Vojtech Bubnik
5e9a8ea700 Fixed some clang warnings 2021-02-09 19:23:58 +01:00
Vojtech Bubnik
770d8b5d08 Finishing the "Iron all surfaces" feature.
Fixes Ironing all solid surface does not seem to work #5703
2021-02-09 18:49:33 +01:00
Vojtech Bubnik
5a638f10cc Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer 2021-02-09 18:36:36 +01:00
Vojtech Bubnik
2e55898d78 Removal of not numerically robust libraries "poly2tree" and "polypartition".
Adjustment of GUI/3DBed.cpp,hpp to use the more stable triangulation algoritm
derived from SGI glut.
Fix of an extremely slow bridging calculation, caused by an extremely
slow bridged area detection function, of which the results were never used.
Fixes "slicing fails or takes too long #5974"
2021-02-09 18:36:28 +01:00
YuSanka
a86e7107a5 Added check for loaded STL file if it was saved in meters. Related to #4521 (Some files are imported in the wrong size) 2021-02-09 17:04:32 +01:00
YuSanka
a1e49e7f8c Implemented #4931 - Added colored background for the Manipulation panel, if
option "Use colors for axes values in Manipulation panel" is enabled in Preferences -> GUI
+ Fix one more compilation warning in UnsavedChangesDialog.cpp
2021-02-09 16:04:03 +01:00
Lukas Matena
a7728634f0 Clang: silence -Wdeprecated-declarations for now
RPi: hopefully silence a warning
2021-02-08 17:52:29 +01:00
Lukas Matena
1834ebe981 Fixing Clang warnings 3 2021-02-08 17:52:29 +01:00
Lukas Matena
b85de89751 Fixing Clang warnings 2 2021-02-08 17:52:29 +01:00
Lukas Matena
0ff0444dcc Fixing Clang warnings 1 2021-02-08 17:52:29 +01:00
Lukas Matena
cd1322ce3f FDM supports gizmo 'autoset by angle' improvements:
- Extra dialog for autosetting by angle in FDM supports gizmo was removed
- Highlighting facets by angle is now controlled by a slider in the main gizmo dialog
- User is allowed to paint even when using the slope highlighter
- The button to turn highlighted facets to blockers was removed, it made no sense
- Highlighted facets are now rendered in light blue
2021-02-08 17:49:36 +01:00
Vojtech Bubnik
672ed99320 Fix of Hilbert Curve Infill: Unable to slice, PrusaSlicer not responding. #5771
Fixed by hard limiting the number of iterations of
reorder_by_two_exchanges_with_segment_flipping()
2021-02-08 17:43:39 +01:00
Vojtech Bubnik
1f5b7fc162 Fix of a selection of default print / filament / sla print / sla material
profile after wizard closes for the first time with the first printer
installed.
2021-02-08 15:56:44 +01:00
enricoturri1966
c767ce18de Removed debug code 2021-02-08 13:23:11 +01:00
Vojtech Bubnik
de32992b49 Fix of Fan ramp not correct for layer 1 #5893 2021-02-08 12:43:27 +01:00
Vojtech Bubnik
5449e6c549 Fixing some compiler warnings on Linux 2021-02-08 11:58:03 +01:00
Vojtech Bubnik
cbee82dc95 Fix of "infill percentage not changing #5993"
Fix of aa4c018cd5
Infill is a percent, which is a number from 0 to 100, not from 0 to 1.
2021-02-08 11:39:42 +01:00
Lukas Matena
53539a5993 Added a missing include 2021-02-08 08:10:14 +01:00
YuSanka
e7544ed0c4 Fix of #5888 - Pause Print M117 message not saved after reloading .3mf project 2021-02-05 19:39:28 +01:00
Vojtech Bubnik
aa4c018cd5 Fix of Slicing hangs when Infill Percentage set very low #5910
When passing a PrintRegionConfig to the slicing back end, zero an infill
density if it is already nearly zero. This avoids an ugly division by
zero in the infill code and it also makes clear to the back end that
we don't want an infill.
2021-02-05 17:58:55 +01:00
Vojtech Bubnik
c2e956c6d1 3MF and AMF error reporting: Use boost::log instead of printf(). 2021-02-05 15:20:23 +01:00
Vojtech Bubnik
828271d016 Improved AMF/3MF security when parsing invalid meshes. 2021-02-05 14:19:51 +01:00
enricoturri1966
76a92e40be Toolpaths rendering - Reduced number of triangles per segment 2021-02-05 11:53:39 +01:00
Vojtech Bubnik
5f86d11c74 EdgeGrid refactoring to support both open and closed contours.
Squashed commit of the following:

commit 4e13a8fe19abcc9aae39a9bc4c7953a743196504
Merge: 6ae766409 6f89da1f3
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date:   Fri Feb 5 11:19:35 2021 +0100

    Merge remote-tracking branch 'remotes/origin/master' into vb_edgegrid_open_lines

commit 6ae76640942269993c942861f0444088843e3fa1
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date:   Fri Feb 5 11:14:48 2021 +0100

    EdgeGrid enhancement to accept both the open and closed lines.

commit 36a5efcd558bd5fd5f46b5f561387a2c73221553
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date:   Fri Feb 5 10:52:14 2021 +0100

    EdgeGrid improvements: Documentation, one bug fix after recent refactoring.

commit 6f89da1f39
Author: tamasmeszaros <meszaros.q@gmail.com>
Date:   Thu Feb 4 20:31:50 2021 +0100

    Disable libicu for boost-regex

    Should have been disabled from the beginning

commit ffc77b1a72a0be9b5622fd33defeebb24bf07b34
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date:   Thu Feb 4 18:40:33 2021 +0100

    EdgeGrid: Annotated those methods that do not work with open contours.

commit 8039a645b4bf0c46c99b90a9c34e7189d7442f86
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date:   Thu Feb 4 18:28:21 2021 +0100

    Refactoring of EdgeGrid structure to support both closed and open lines.
2021-02-05 11:21:04 +01:00
Vojtech Bubnik
ab6cc7085e WIP Brim improvements:
Fix of connecting the brim polylines: Don't connect closed contours.
Some optimizations, documentation etc.
2021-02-04 15:48:36 +01:00
Vojtech Bubnik
d1dfbb31ab WIP: Fixing brim generator unit tests by disabling connect_brim_lines() 2021-02-04 13:59:59 +01:00
Vojtech Bubnik
3dd07dfd73 Fix of brim generator after refactoring. 2021-02-04 11:18:39 +01:00
Vojtech Bubnik
4cdcfe6005 DiffPresetDialog, non modal to compare two presets.
Added menu item "Window->Compare presets" to compare more than one type
of presets.
Code refactoring for PresetComboBox: Use suffix "modified" just for
PlaterPresetComboBox and TabPresetComboBox
Code refactoring. wxDataViewCtrl and related functions extracted from
DiffPresetDialog and UnsavedChangesDialog to the separate class
DiffViewCtrl
Code refactoring, Tab.cpp: Build all unregular pages on a first build of
the Printer Settings

Squashed commit of the following:

commit 91f45a8a2d97d252337c7306dd02db607fd79c00
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date:   Thu Feb 4 09:34:29 2021 +0100

    Fixed after merge

commit 09aa502498b08c059ecdf334f5db1567739b4520
Merge: 6df8e83e1 0baa92fab
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date:   Thu Feb 4 09:31:43 2021 +0100

    Merge remote-tracking branch 'remotes/origin/master' into ys_diff_dlg

commit 6df8e83e1af3ba096ac39d25985b6deb2e0a245b
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date:   Thu Feb 4 09:29:53 2021 +0100

    Tiny beautification.

commit e781ceaaf7c39bc073476409cc02918d9f182930
Author: Vojtech Bubnik <bubnikv@gmail.com>
Date:   Wed Feb 3 18:05:19 2021 +0100

    Reworked copying of PresetBundles:
    1) Simplified by using the default copy constructors and copy operators.
    2) Made safer by not allowing PresetCollection and PhysicalPrinterPresetCollection
       to be copied or instantiated outside of PresetBundle.
    3) Fixed Preset::vendor pointers after copying PresetBundle.

commit a8f0b7aa5156465cdb3e3dbb86feb66a64bcebc0
Author: YuSanka <yusanka@gmail.com>
Date:   Mon Jan 25 16:13:53 2021 +0100

    DiffPresetsDialog: Show compatibility to print/printer presets selected in DiffPresetDialog

commit 597451f930a4330376966d8cf3350056d4f85a73
Merge: cce5b5710 59017a7da
Author: YuSanka <yusanka@gmail.com>
Date:   Thu Jan 21 12:14:48 2021 +0100

    Merge remote-tracking branch 'origin/master' into ys_diff_dlg

commit cce5b5710d1225c7eaa52d0abb4b3f66fbd3b6a1
Author: YuSanka <yusanka@gmail.com>
Date:   Thu Jan 21 12:11:40 2021 +0100

    DiffPresetDialog: Fixed crash on ASAN build

commit ad8d728d89d7a75c2ac136ea8cdbb730ab774cd9
Author: YuSanka <yusanka@gmail.com>
Date:   Wed Jan 20 16:38:28 2021 +0100

    FullCompareDialog improvements

commit 316bafbeec9bb63f731b653d296062d9e22dd02f
Author: YuSanka <yusanka@gmail.com>
Date:   Wed Jan 20 09:25:46 2021 +0100

    DiffPresetDialog improvements:
    * Update presets lists after save changes in edited preset or change printer_technology
    * Tab.cpp: Build all unregular pages on a first build of the Printer Settings

commit 01171c8ef50389d0801b0ccc5746ab0c3b731b11
Author: YuSanka <yusanka@gmail.com>
Date:   Tue Jan 19 17:26:28 2021 +0100

    DiffPresetDialog : improvements
    * This dialog is non-modal now
    * "Compare presets" menu item is moved from "View" to the "Window" menu group
    * Added info tooltips for the bitmap buttons between presets
    * Added "Show all presets" checkbox
    * Show full difference between printer presets with different count of extruders

commit 3d38b62f3c9de8aab352ed3bcff297d5c0239b2e
Merge: e50fe6de9 9a2310ae9
Author: YuSanka <yusanka@gmail.com>
Date:   Mon Jan 18 10:00:18 2021 +0100

    Merge remote-tracking branch 'origin/master' into ys_diff_dlg

commit e50fe6de984decadfef3d4b952f0eec8ab9e6670
Author: YuSanka <yusanka@gmail.com>
Date:   Sat Jan 16 02:27:24 2021 +0100

    DiffPresetDialog improvements
    Added menu item "View->Compare presets" to compare more than one type of presets

commit bf08b7c8c969ad0ca631b9eeac1bc231f474e72b
Author: YuSanka <yusanka@gmail.com>
Date:   Sat Jan 16 00:28:39 2021 +0100

    Code refactoring. wxDataViewCtrl and related functions extracted from DiffPresetDialog and UnsavedChangesDialog to the separate class DiffViewCtrl

commit 7aeb63032b0bc2bd06e60990c060008660a5c44f
Author: YuSanka <yusanka@gmail.com>
Date:   Fri Jan 15 21:35:43 2021 +0100

    DiffPresetDialog: first implementation

commit 2f23d5af9d6b5dd670dfb7d06eedbe0e6d2960c6
Author: YuSanka <yusanka@gmail.com>
Date:   Thu Jan 14 16:28:43 2021 +0100

    Code refactoring for PresetComboBox.
    Use suffix "modified" just for PlaterPresetComboBox and TabPresetComboBox
2021-02-04 09:42:32 +01:00
YuSanka
0baa92fab8 Localization: Added plural form for some phrases, updated POT 2021-02-03 21:30:38 +01:00
Yuri D'Elia
c6fa06579f Remove unneeded inclusion of boost::nowide 2021-02-03 20:41:04 +01:00
Vojtech Bubnik
73c9f939e0 Squash merge of lh_brim_rework,
brim separated to Brim.cpp,hpp
Refactored accessors to PrintObjectPtrs, PrintRegionPtrs, LayerPtrs,
SupportLayerPtrs for const correctness.
2021-02-03 15:12:53 +01:00
enricoturri1966
f939cac841 #5071 - Reload from disk for 3mf files 2021-02-01 14:33:07 +01:00
Vojtech Bubnik
a116914fce WIP VoronoiOffset: Squash merge of vb_voronoi_offset
Working contour offsetting,
skeleton_edges_rough() to detect "important" skeleton edges.
Radius of an inscribed circle along the "important" skeleton edges
changes slowly, therefore these "important" skeleton edges signify
oblong regions possibly needing a gap fill.
2021-01-29 16:34:22 +01:00
Lukas Matena
dc4bdad84a Fixed some more GCC warnings 2021-01-29 15:17:03 +01:00
Lukas Matena
2d32c80b75 Fixing GCC warnings 2 2021-01-29 10:46:52 +01:00
Lukas Matena
b5280fbed9 Fixing GCC warnings 1 2021-01-29 10:46:33 +01:00
Vojtech Bubnik
9c5dd358ab Fix of #4654 #5122 #5668 #5811 #5895
Fixing model import of models with nearly degenerate triangles, which
degenerate after transformation (translation or rotation).

There was certainly a bug in PrusaSlicer, however this bug was triggered
mostly by the ASCII STL files generated by OpenSCAD, likely due to insufficient
number of decimal digits when saving an ASCII STL, see
[openscad/openscad] STL export should contain single precision floats (#2651)
2021-01-28 19:00:01 +01:00
enricoturri1966
b178a1b04f 3mf export - Do not export unneeded space 2021-01-27 15:53:44 +01:00
enricoturri1966
d68489c7d7 3mf export - Removed export of duplicated line into model config file 2021-01-27 12:26:46 +01:00
David Kocik
c02385b115 missing ifdef 2021-01-27 10:58:52 +01:00
David Kocik
fa2568a5e3 Check loading of blacklisted dlls and show warning dialog at startup. Also show these dlls in sysinfo dialog. 2021-01-27 10:40:38 +01:00
Vojtech Bubnik
4f161607c7 Follow-up on dcec1fa74:
Commented out fuzzy_skin_shape for now, the parameter may be used
in the future, but for now we don't want the parameter to be stored
into configuration files.
2021-01-27 09:58:42 +01:00
Vojtech Bubnik
dcec1fa749 Commented out fuzzy_skin_shape for now, the parameter may be used
in the future, but for now we don't want the parameter to be stored
into configuration files.
2021-01-27 09:36:39 +01:00
Vojtech Bubnik
05f9910c8f Fixes after merge. 2021-01-27 09:35:39 +01:00
Vojtech Bubnik
7a6c038480 Refactoring of 3MF file export to use the new homebrewed miniz
streaming interface. This shall fix high memory consumption and
crashes when exporting extremely large 3MF files.
2021-01-27 09:18:17 +01:00
Vojtech Bubnik
55c698feef WIP: Exporting 3MFs through a streaming interface. 2021-01-27 09:18:16 +01:00
enricoturri1966
a897dd0504 Disabled tech ENABLE_GCODE_VIEWER_STATISTICS 2021-01-26 13:56:32 +01:00
enricoturri1966
9304defe7c Tech ENABLE_UNSIGNED_SHORT_INDEX_BUFFER merged into tech ENABLE_SPLITTED_VERTEX_BUFFER 2021-01-26 13:32:27 +01:00
enricoturri1966
3533473256 Tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING merge into tech ENABLE_SPLITTED_VERTEX_BUFFER 2021-01-26 12:21:50 +01:00
enricoturri1966
9ede830f66 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer 2021-01-26 10:10:23 +01:00
Vojtech Bubnik
4620402ab4 WIP: Initial Fuzzy Skin implementaiton #2010
Based on pull request Experimental fuzzy skin mode #4611 by @etet100
and on CuraEngine implementation of perimeter fuzzyfication
void FffPolygonGenerator::processFuzzyWalls(SliceMeshStorage& mesh)
2021-01-26 09:29:34 +01:00
Vojtech Bubnik
eef800b5c4 FIXME on ExPolygon::overlaps(), which should be commutative. 2021-01-22 15:32:45 +01:00
enricoturri1966
97c31b2a34 ENABLE_SPLITTED_VERTEX_BUFFER - Re-enable tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING after fixing it 2021-01-21 16:33:35 +01:00
enricoturri1966
5161643fc6 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer 2021-01-20 13:48:09 +01:00
enricoturri1966
ee40ab421a ENABLE_SPLITTED_VERTEX_BUFFER - Use unsigned short indices buffers to render toolpaths and temporary disable tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING which is causing artifacts 2021-01-20 13:47:48 +01:00
Vojtech Bubnik
6d7d482ca1 Fix of Extrusion Width Percentge #4631
Fixed extrusion width validation logic in case the extrusion width
was specified wrt. layer height.
2021-01-20 11:03:52 +01:00
Vojtech Bubnik
c506c15ed4 Manual merge of 4e586b8edabde1146c4013ca2437469a448315e2 from upsteam Slic3r,
fixing "percent first layer speed was not applied over autospeed." GH upstream Slic3r #2945
our GH issue First Layer Speed Percentage not applying (#5829)
2021-01-19 16:50:24 +01:00
Vojtech Bubnik
2bc6679a62 Partial revert of 1bffc2b99b
(deriving the printer technology from the merged configs).
2021-01-19 15:18:03 +01:00
Vojtech Bubnik
5294a48ee8 Fix of prusa 2.3.0 crash with 0.25 nozzle #5825
Importing a config bundle as a config file was broken for
multi material FDM printers, where a different filament was active
for each extruder.
2021-01-19 09:58:14 +01:00
enricoturri1966
59cabc9712 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer 2021-01-18 09:59:26 +01:00
enricoturri1966
8f1bc02287 ENABLE_SPLITTED_VERTEX_BUFFER - fixed cracks in toolpaths when splitting vertex and index buffers 2021-01-18 09:59:05 +01:00
Vojtech Bubnik
59911e7c35 Slight improvement in Hilbert infill by using constexpr 2021-01-15 09:34:50 +01:00
Vojtech Bubnik
48877614e2 Fix of --scale-to-fit not accepting any input as valid (#5772)
Fixed parsing of Point3, fortunately Point3 was used at just a single
command line parameter, thus this was not a big deal.
2021-01-14 12:51:28 +01:00
enricoturri1966
dc781535b2 Code cleanup 2021-01-12 14:34:52 +01:00
enricoturri1966
250adabd5c Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer 2021-01-12 08:10:17 +01:00
Vojtech Bubnik
7d751753bc Replaced __linux macro with __linux__ 2021-01-11 13:31:30 +01:00
Vojtech Bubnik
5a1a41096b Fix of a crash when slicing an object producing no layers and
elphant foot compensation is enabled.
2021-01-11 12:20:50 +01:00
Raphael Sobik
2db704917a
Use correct M204 command for acceleration
M204 S is not supported for RepRapFrimware (https://duet3d.dozuki.com/Wiki/Gcode#Section_M204_Set_printing_and_travel_accelerations).
2021-01-11 10:50:18 +01:00
enricoturri1966
77f6606771 Another refactoring in GCodeViewer::load_toolpaths() 2021-01-07 11:13:07 +01:00
enricoturri1966
676540279d Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer 2021-01-07 08:24:29 +01:00
Vojtech Bubnik
daa0bbdb0c Fix of slow update when dragging the vertical slider in G-code viewer
with volumetric flow color mapping enabled.
Fixes "Volumetric flow rate computes very slowly #5572"
2021-01-06 15:32:31 +01:00
Vojtech Bubnik
67256d6bb0 Added a FIXME comment for
Sequential tool path ordering of multiple parts within the same object, aka. perimeter tracking (#5511)
2021-01-06 12:19:08 +01:00
Vojtech Bubnik
93a5906a18 Fixed numerical issue with the new algorithm to connect infill lines
with perimeters:
1) Increased accuracy of the contour length parametrization from
   float to double, as double should capture the difference of
   32bit coord_t with full accuracy (or at least very close).
2) The algorithm to insert the T-joint points into the infill perimeter
   contour was improved to avoid inserting duplicate points.
2021-01-06 12:18:05 +01:00
Vojtech Bubnik
3c9f3d2b66 Fixing the infill order for concentric infill to outside-in.
Relies to:
Concentric Fill Start Point - New Feature Request #4948
Feature Request: Archimedean Chords - Option to define direction of travel (Inside-Out or Outside-In) #5214
2021-01-06 11:05:32 +01:00
Lukas Matena
e733565031 Fix of #5632 (painter gizmos not working correctly with scaled objects)
This was broken since 8bcdbb7.
2021-01-05 17:06:05 +01:00
Vojtěch Bubník
57d0f4b4f6
Merge pull request #5544 from hzeller/fix-assignment-of-charliteral-to-writable-charptr
Fix assignment of string literals to char*.
2021-01-05 13:11:29 +01:00
Vojtech Bubnik
fb29325b14 Fix of G-code Viewer not loading .gco files #5536
".gcode", ".gco", ".g" and ".ngc" were considered to be G-code file
extensions by the G-code import / export file dialogs, but not by
various other functions. Now the G-code extension is tested by
a single function is_gcode_file(string).
2021-01-05 12:26:11 +01:00
Vojtech Bubnik
1076e077ce Fix of Adaptive cubic infill weird behavior #5633
Enabling reordering of infill paths for Support Cubic and Adaptive Cubic
infill types.
2021-01-04 15:42:23 +01:00
Lukas Matena
30c8592b10 Do not use ironing extrusions for autospeed calculations (#5082) 2021-01-04 14:21:24 +01:00
enricoturri1966
4d3cb19423 5677 - GCodeProcessor accepts gcode line T-1 as valid for RepRapFirmware and RepRapSprinter 2021-01-04 14:21:24 +01:00
enricoturri1966
016042db10 Disabled tech ENABLE_RENDER_STATISTICS 2021-01-04 14:21:24 +01:00
Lukas Matena
837070a246 Hotfix of a crash with raft and one-layer object (#5652)
The problem is that PrintObject support generator is only run when m_layers.size() > 1, so one-layer object will skip it.
It apparently never worked, after recent refactoring (probably 8bfc986) it started to crash in GCode generator.
This commit fixes the crash, but not the problem. The raft is still not generated (like in all versions since 2.0.0 at least).
2021-01-04 14:21:24 +01:00
Lukas Matena
6c2ce4b6b6 Escape special xml characters when writing metadata into the model file
This should fix #5577
2021-01-04 14:21:24 +01:00
Vojtech Bubnik
2d428198b1 Fix of 2.3 rc1 can't load its own 3mf files (if they contain custom gcode) #5550
The issue was handling of the special "default_filament_profile" vector,
which is not being normalized in length to the number of extruders,
as this vector is being shown to the user at the Printer dependencies page,
and we don't want to present empty fields there, if the default filament
profile was not defined in the system preset.
2021-01-04 11:13:44 +01:00
Vojtech Bubnik
b002c1485d Fix of PrusaSlicer hangs on Linux when run with non standard task affinity #5661 2021-01-04 09:03:49 +01:00
Lukáš Hejl
dc2e7aeb4e Fixed wrong generation of Adaptive Cubic and Support Cubic infill when infill extrusion width is set in percent. 2020-12-21 14:14:06 +01:00
Lukáš Hejl
181642b85b Fix of #5528 - Request re-slicing when bottom_solid_layers changes and spiral_vase is enabled. 2020-12-21 09:15:33 +01:00
Henner Zeller
79e041b961 Fix assignment of string literals to char*.
Fix some char *foo = "string literal" assignments that
really should be assigned to const char*.

(they also happen to be constexpr, but that only prevents
to assign something later to foo, but does not alter
the char* type).

Signed-off-by: Henner Zeller <h.zeller@acm.org>
2020-12-20 13:40:25 -08:00
Lukas Matena
1cbe2bd87e Added a missing translation macro 2020-12-18 13:04:28 +01:00
Lukas Matena
8f3baeb1c9 Fix of #5410 (Ironing untick/tick bug)
This is a follow-up of commit b1b7a5a which fixed several similar bugs
2020-12-18 12:44:24 +01:00
Lukas Matena
6e3b4b6fd8 Random seam: optimization and fix of a possible infinite loop 2020-12-17 15:48:25 +01:00
enricoturri1966
ce32d68368 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-12-17 11:41:54 +01:00
enricoturri1966
b8fc1d3173 GCodeViewer - Fixed visualization of time estimates for silent mode 2020-12-17 11:41:41 +01:00
Vojtech Bubnik
ba9a9b4e7a Fixed buffer overflow in the OBJ parser.
Improved error reporting on OBJ parser.
2020-12-17 09:53:21 +01:00
Vojtech Bubnik
7df9f3e422 Improvements of OBJ parser robustness. 2020-12-17 09:17:07 +01:00
Vojtech Bubnik
4d459f37de Merge branch 'lm_230beta3_fixes' 2020-12-16 13:51:09 +01:00
Lukáš Hejl
80251e0cf9 Fixed of unintentional disabling of wipe even in cases when avoid crossing perimeters weren't applied due to exceeding the maximum detour length. 2020-12-16 13:17:09 +01:00