enricoturri1966
73603e4937
GCodeProcessor -> Do not export width tags to gcode
2020-08-17 14:37:26 +02:00
enricoturri1966
b156153405
GCodeViewer -> Use rounded values for toolpaths height, width and volumetric rate to reduce the number of generated paths
2020-08-17 13:07:13 +02:00
enricoturri1966
5b579aee9a
GCodeProcessor -> Extract toolpaths width from gcode moves
2020-08-17 10:54:41 +02:00
enricoturri1966
f2d02faef4
GCodeProcessor -> Added debug code to check toolpaths data extracted from gcode, as mm3 per mm, height and width
2020-08-17 10:06:41 +02:00
enricoturri1966
b80bde11f3
GCodeProcessor -> Extract toolpaths height from gcode moves
2020-08-13 12:51:50 +02:00
enricoturri1966
5a0e048079
ENABLE_GCODE_VIEWER -> Drag and drop .gcode files into gcode viewer
2020-08-11 14:23:47 +02:00
enricoturri1966
5882c121cc
GCodeProcessor -> Fixed time estimate for stealth mode
2020-08-11 11:12:30 +02:00
enricoturri1966
6ed2cb661d
GCodeProcessor -> Export remaining time (lines M73) to gcode
2020-08-10 14:22:05 +02:00
enricoturri1966
64001c0fe5
GCodeProcessor -> Fixed export of estimated time to gcode filename
2020-08-07 15:30:08 +02:00
enricoturri1966
0840b2328a
Tech ENABLE_GCODE_VIEWER_AS_STATE set as default
2020-08-03 15:00:19 +02:00
enricoturri1966
5249b3e018
ENABLE_GCODE_VIEWER -> Estimated print time statistics moved from PrintStatistics to GCodeProcessor
2020-08-03 13:57:10 +02:00
enricoturri1966
1532920d81
GCodeProcessor -> Extended import of config data from gcode saved by PrusaSlicer
2020-08-03 08:46:32 +02:00
enricoturri1966
534e8bb909
ENABLE_GCODE_VIEWER -> Export to gcode layer z and layer height at each layer change
2020-07-30 13:49:57 +02:00
enricoturri1966
0348986bda
Follow-up of 9d4344a78c
-> ensure printbed always rendered as custom in gcode preview mode
2020-07-29 14:20:01 +02:00
enricoturri1966
9d4344a78c
GCodeProcessor/GCodeViewer -> Extract bed shape from gcode files generated by PrusaSlicer
2020-07-29 12:47:42 +02:00
enricoturri1966
16e282110d
GCodeProcessor -> Load config data from gcode files generated by PrusaSlicer
2020-07-29 11:13:48 +02:00
enricoturri1966
11cf9a87f1
GCodeProcessor -> Calculate mm3 per mm on the fly
2020-07-29 10:04:10 +02:00
enricoturri1966
d9228ee82c
GCodeProcessor -> Human readable extrusion roles in gcode
2020-07-28 09:48:55 +02:00
enricoturri1966
14366800e2
GCodeProcessor -> Added parsing of 3d part generated gcodes
2020-07-27 15:45:29 +02:00
enricoturri1966
8f90fe1609
Code cleanup and small refactoring
2020-07-22 10:37:25 +02:00
enricoturri1966
b03ae392c5
GCodeViewer -> Added estimated printing times for extrusion roles
2020-07-17 10:50:16 +02:00
enricoturri1966
f7164db68e
GCodeViewer -> Added estimated printing times for move types
2020-07-17 08:27:23 +02:00
enricoturri1966
3a88e69896
ENABLE_GCODE_VIEWER -> Integration of time estimator into GCodeProcessor
2020-07-16 11:09:21 +02:00
enricoturri1966
69de5c8c9f
GCodeViewer -> Pass vertex normal to shaders for toolpaths
2020-06-29 14:00:08 +02:00
enricoturri1966
ab60499298
Fixed conflicts after merge with master
2020-06-12 10:35:18 +02:00
enricoturri1966
aa14b42638
GCodeProcessor -> Added processing of gcode lines G0
2020-06-12 09:01:20 +02:00
YuSanka
f74b1c6547
Added uncommitted changes
2020-06-08 12:36:42 +02:00
enricoturri1966
ca17948f87
ENABLE_GCODE_VIEWER_AS_STATE -> Load gcode from file and process it
2020-06-08 09:12:20 +02:00
enricoturri1966
70a6fb0e20
Added new tech ENABLE_GCODE_VIEWER_AS_STATE -> GCodeViewer as a new application state (WIP) + fix of conflicts after merge with master
2020-06-05 16:50:17 +02:00
enricoturri1966
c3d643ead3
Fixed conflicts after merge with master
2020-06-04 13:57:39 +02:00
Lukas Matena
ed98a859af
Fix of #3919 (extremely wide wipe tower with 0.35mm FAST profile)
...
This is an excerpt from ec86d94
, which was recently reverted because
the other changes from that commit broke some functionality.
2020-06-03 15:34:33 +02:00
Lukas Matena
8ecb0bfe0e
Revert "Workaround for the Prusa3D Fast (layer height 0.35mm) profile, which"
...
This reverts commit ec86d94f02
.
2020-06-03 15:34:33 +02:00
enricoturri1966
2eb4b2caed
Fixed conflicts after merge with master
2020-05-27 10:32:02 +02:00
Lukas Matena
c2cd430941
Few more include chains broken
2020-05-26 13:46:59 +02:00
enricoturri1966
dd424b6bcf
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-05-21 11:38:22 +02:00
Lukas Matena
35c8c84631
Fix of #3965 (properly disable linear advance with RepRap firmware)
2020-05-21 10:47:50 +02:00
enricoturri1966
cbfb09a241
Fixed build for all 4 cases of tech ENABLE_SHADERS_MANAGER and ENABLE_GCODE_VIEWER enabled/disabled and code cleanup
2020-05-20 17:03:53 +02:00
enricoturri1966
c7c87973b7
First installment of tech ENABLE_SHADERS_MANAGER, using class GLShadersManager as a central point to manage OpenGL shaders
2020-05-20 14:11:22 +02:00
enricoturri1966
89dafeac95
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-05-07 10:49:34 +02:00
enricoturri1966
5c6a56ca29
GCodeAnalyzer and GCodePreviewData removed from tech ENABLE_GCODE_VIEWER
2020-05-07 10:49:12 +02:00
bubnikv
b73e675aaa
Changed the Ironing G-code preview color based on Jindra's feedback.
2020-05-06 18:28:23 +02:00
enricoturri1966
05e4476808
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-04-29 12:53:55 +02:00
enricoturri1966
1cb0f044db
GCodeProcessor::MoveVertex -> added placeholder for time
2020-04-28 10:29:25 +02:00
enricoturri1966
81a29169ae
GCodeViewer -> Coloring of travel paths
2020-04-24 08:46:31 +02:00
enricoturri1966
90d5cf1735
Fix to previous commit
2020-04-23 15:46:21 +02:00
enricoturri1966
66964c44c1
GCodeViewer -> Refactoring and code cleanup
2020-04-23 15:12:40 +02:00
enricoturri1966
7a0df4bcb4
GCodeViewer -> Extrusion toolpaths colored by color print (wip) + visualization of tool changes, color changes, pause prints, custom gcodes + refactoring
2020-04-22 16:29:07 +02:00
enricoturri1966
443a511420
GCodeViewer -> Extrusion toolpaths colored by volumetric rate
2020-04-21 11:38:42 +02:00
enricoturri1966
6e5a6f3b43
GCodeViewer -> Extrusion toolpaths colored by height
2020-04-20 10:52:16 +02:00
enricoturri1966
75d1e8373d
GCodeViewer -> extrusion paths colored by extrusion role
2020-04-16 15:09:04 +02:00
bubnikv
10110ed307
WIP: Ironing over top surfaces.
2020-04-14 11:53:28 +02:00
enricoturri1966
c3eb65c461
Added class GCodeViewer -> basic render of gcode toolpaths using dedicated shaders
2020-04-14 10:02:08 +02:00
enricoturri1966
22cf0396fc
Added missing include
2020-04-06 17:32:35 +02:00
enricoturri1966
2c69d96239
Reduced size of GCodeProcessor::MoveVertex
2020-04-06 17:24:11 +02:00
enricoturri1966
57dad5dfd2
GCodeProcessor additions:
...
process color change comment tag
process pause print comment tag
process custom code comment tag
process end pause print or custom code comment tag
2020-04-06 11:53:15 +02:00
enricoturri1966
1caac17b02
GCodeProcessor additions:
...
process M108 lines
process M132 lines
process M135 lines
process M401 lines
process M402 lines
2020-04-06 08:55:48 +02:00
enricoturri1966
dce1f24ad8
GCodeProcessor additions:
...
process G10 lines
process G11 lines
process G22 lines
process G23 lines
process M106 lines
process M107 lines
process mm3_per_mm comment tag
2020-04-03 10:15:46 +02:00
enricoturri1966
f05de150c5
Added another missing include
2020-04-02 15:52:42 +02:00
enricoturri1966
d0ce17656f
Added missing includes
2020-04-02 13:19:42 +02:00
enricoturri1966
ab1e90ec0d
Fixed conflicts after merge with master
2020-04-02 12:29:30 +02:00
enricoturri1966
956f7a4593
GCodeProcessor additions:
...
process G90 lines
process G91 lines
process G92 lines
process M82 lines
process M83 lines
process T lines
process extrusion role/width/height comment tags
debug output
2020-04-02 12:03:18 +02:00
enricoturri1966
f598c2d5d8
Fixed conflicts after merge with master
2020-04-01 15:06:30 +02:00
enricoturri1966
29cbfa7c9e
Fixed conflicts after merge with master
2020-03-30 09:36:37 +02:00
bubnikv
ec86d94f02
Workaround for the Prusa3D Fast (layer height 0.35mm) profile, which
...
collides with the maximum allowed layer height at the Printer Extruder
0.25mm.
Works around "MMU2s and supports on prusaslicer 2.2.0 issue #3919 "
2020-03-27 14:15:09 +01:00
enricoturri1966
a1a4d49f15
Fixed conflicts after merge with master
2020-03-25 12:07:59 +01:00
enricoturri1966
3d6c9e54e9
ENABLE_THUMBNAIL_GENERATOR set as default
2020-03-25 10:15:02 +01:00
Lukas Matena
97b9de47b4
Merge branch 'master' into dev
2020-03-24 21:51:05 +01:00
enricoturri1966
4c1d867ba0
#3897 - Small optimisation in GCodePreviewData::RangeBase::get_color_at (thanks to rongith)
2020-03-23 16:12:52 +01:00
bubnikv
046f0dbfa2
Fixed a regression issue to PrusaSlicer 2.1.1
...
Custom printer with center of bed at 0,0 results in "toolpath outside print area" #3510
The G92 A0 B0 was incorrectly considered to be equal to just G92
to reset all axes.
2020-03-21 10:09:33 +01:00
enricoturri1966
f4aa9c5b0e
#3858 - Added missing reset for fan speed visualization
2020-03-18 08:10:05 +01:00
Enrico Turri
3fd6c8a2ff
#2922 - Fan speed for gcode visualization modified as proposed by rongith
2020-03-13 08:25:48 +01:00
Lukas Matena
a6a77361ba
Multimaterial purging lines fixed on rectangular beds with non-standard origin ( #3805 )
2020-03-11 16:10:51 +01:00
Lukas Matena
a48a79603c
Multimaterial purging lines fixed on rectangular beds with non-standard origin ( #3805 )
2020-03-10 15:31:53 +01:00
Lukas Matena
0869a63eaf
Fix of #3769 - wipe into infill
2020-03-05 15:26:52 +01:00
Enrico Turri
bf3888fc49
Reduced ram used by GCodeAnalyzer by replacing doubles with floats into GCodeAnalyzer::GCodeMove
2020-03-04 13:21:03 +01:00
bubnikv
cab42b89ad
Fixed some compilation warnings.
2020-03-04 13:06:21 +01:00
Lukas Matena
7589e4ebfc
Fixed some more warnings
2020-03-03 15:53:26 +01:00
Lukas Matena
c70b34b6c8
Fixed several warnings
...
The biggest difference is changing PresetCollection::m_idx_selected from int to size_t, which fixed many warnings at once.
2020-03-03 15:47:02 +01:00
Enrico Turri
3b6d334d7b
ENABLE_GCODE_VIEWER - Basic framework for new gcode viewer
2020-03-02 15:13:23 +01:00
Enrico Turri
ebbebe3727
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-02-14 08:32:06 +01:00
Enrico Turri
131257cef1
GCodeProcessor basic framework
2020-02-14 08:31:31 +01:00
bubnikv
4e11552da9
Spiral vase improvements and bugfixes.
...
Fixes Connecting / expanding Bottom Layers to Vase Perimeter #253
Fixes Slicing error in vase mode #452
Fixes Slicing Issue (Vase Mode, 0.6mm dmr nozzle) #1887
Fixes Top fill pattern isn't used in spiral vase mode #2533
Fixes Cisar's vase doesn't slice correctly, creates artefacts #3595
When the model is sliced, all the contours are newly oriented
counter-clockwise (even holes), merged and then only the largest area
contour is retained. In perimeter generator, if the largest contour
splits into multiple perimeters, newly only the largest area perimeter
is retained in spiral vase mode. These two changes solve #3595 and similar.
The infill is newly calculated only for the bottom solid layers
if the spiral vase mode is active (removes various unwanted infill
along the vase walls), and the last bottom solid layer is switched
to a top solid pattern (solves #2533 ).
The thin walls are newly enforced to be disabled in spiral vase mode,
and the "ensure vertical shell wall" is enforced in spiral vase mode
to extend the bottom of the vase to the vase hull (fixes #253 ).
2020-02-08 21:36:43 +01:00
bubnikv
fb235cb675
Color change - handling Color Change data stored for different
...
printer configuration:
ss -> sm : Just apply the color changes of the original ss project at the active extruder.
ss -> mm : There are no tool changes stored. Ignore color changes, they are invalid because they are extruder non-specific.
sm -> ss : Apply tool changes as color changes (tool changes remember the target color), apply original color changes.
sm -> mm : Ignore both color changes and tool changes.
mm -> ss/sm : Ignore both color changes and tool changes.
2020-02-06 14:03:27 +01:00
YuSanka
1ed313ab79
Synchronized mode of color_print data to/from 3mf/amf
...
+ Code refactoring " CustomGCode extracted to separate namespace and file
2020-01-23 16:11:21 +01:00
bubnikv
71fa411100
Refactored PrintObject::m_copies to PrintInstances,
...
so that the ordering code at G-code export may work directly with
pointers to PrintInstances instead of with pair of <PrintObject, copy idx>.
Also the PrintInstance knows its source ModelInstance, which allows
sorting of PrintInstances for sequential printing in the order
they appear in Plater's object list.
2020-01-23 09:53:06 +01:00
Enrico Turri
cbe5132832
#3540 - Fixed toolpaths preview for empty ranges
2020-01-20 10:38:01 +01:00
YuSanka
2259f7b3e8
Code refactoring to mode comparison
2020-01-17 12:24:58 +01:00
Enrico Turri
67655743b9
Follow-up of merge of pull request #3293 -> Fixed missing include (for MAC build)
2020-01-16 16:18:35 +01:00
YuSanka
52c590f57a
Merge remote-tracking branch 'origin/ys_cp_improvements'
2020-01-16 16:06:19 +01:00
Enrico Turri
46819224ee
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-01-16 16:03:14 +01:00
Enrico Turri
75c2b44d23
Follow-up of merge of pull request #3293 -> Fixed link error and toolpaths role colors
2020-01-16 16:02:40 +01:00
YuSanka
89fcd7f95a
Added "mode" variable for custom_gcode_per_print_z
2020-01-16 16:01:19 +01:00
YuSanka
20fd874ff2
Merge remote-tracking branch 'origin/master' into ys_cp_improvements
2020-01-16 15:01:57 +01:00
bubnikv
3acfae92e1
Fix of recent wipe tower / tool ordering refactoring.
2020-01-16 14:59:16 +01:00
YuSanka
099118d6f2
Merge remote-tracking branch 'origin/master' into ys_cp_improvements
2020-01-16 14:02:19 +01:00
Enrico Turri
6be4b3865b
Merge remote-tracking branch 'foxox/feature/ScaleSpeedLegendToVisible2'
2020-01-16 13:55:59 +01:00
bubnikv
1b354d8d3c
WIP: Enhancement of the FDM back end to support Color Change situations,
...
when a project was switched from multi-extruder printer to single
extruder printer.
2020-01-16 13:39:03 +01:00
bubnikv
8e5ba5ccc5
Added synonyms to some PrintSteps:
...
psWipeTower now equals to new psToolOrdering indicating that
the ToolOrdering has been calculated (only if non-sequential mode is active).
psBrim now equals to new psExtrusionPaths
psExtrusionPaths shall be the last step before psWipeTower, indicating
that all the printing extrusions are calculated for the G-code preview
slider to edit the custom per print_z color changes, tool changes etc.
2020-01-15 16:20:16 +01:00
YuSanka
15f873dd74
DoubleSlider: Implemented code for check of used extruders for MustiAsSingle mode
2020-01-15 15:35:56 +01:00
bubnikv
2c958c021d
Fixed regression in placement of Color Change event at the correct layer.
2020-01-14 17:35:42 +01:00
bubnikv
390376daae
Fix of recent refactoring of color print.
2020-01-14 16:11:03 +01:00
Lukas Matena
fd6c9582d5
Refactoring fix: making sure that mark_wiping_extrusions doesn't report it wiped something it didn't
2020-01-14 15:43:43 +01:00
bubnikv
ab6a2b71e8
Another bugfixes of GCode export after refactoring.
2020-01-14 15:12:45 +01:00
bubnikv
c96fc5eb51
gcc & clang do not like taking reference of const temporaries.
2020-01-14 12:10:01 +01:00
bubnikv
98e49772ed
Custom G-code references are now being assigned to ToolOrdering::LayerTools()
...
and the superfluous M600 (color change) events are filtered out there.
Fixed a handful of compiler warnings.
2020-01-14 11:54:09 +01:00
bubnikv
8bfc986fa7
Refactoring of GCode::process_layer().
...
Refactoring of GCode export of color changes, extruder switches etc,
so that the "color change" like extruder switches are applied first
at the Wipe Tower / G-code export, so that adding / removing
an extruder switch at the G-code preview slider does not invalidate
slicing.
2020-01-14 10:31:18 +01:00
Enrico Turri
91acbd01ed
Fixed GCodeAnalyzer and GCodeTimeEstimator to avoid artifacts while rendering toolpaths due to numerical issues on extruder coordinate
2020-01-13 15:27:37 +01:00
bubnikv
15eedef74b
Refactoring of ToolOrdering (wipe into infill / object)
...
Refactoring of GCode::_do_export()
Helper lower_bound and search functions similar to std, but without
needing the value object explicitely.
2020-01-10 11:27:04 +01:00
bubnikv
cc2b9b8849
ToolOrdering: Removed unused parameter.
2020-01-10 11:27:04 +01:00
bubnikv
e0811e4aa5
Optimization of G-code export:
...
1) Don't allocate ExtruderOverrides if not necessary
2) Use boost::container::small_vector<int32, 3) for ExtruderOverrides
(usually less than 4 instances are printed))
2020-01-08 14:58:24 +01:00
bubnikv
81187e7e0e
Some refactoring and const correctness fixes.
2020-01-07 14:35:43 +01:00
Enrico Turri
61ab9e37d6
#3287 - Fixed GCodeAnalyzer and GCodeTimeEstimator when using Machinekit and Mach3/Linuxcnc gcode flavours
2019-12-09 11:40:26 +01:00
foxox
dea83da5b7
Speed legend scales depending on travel visibility.
2019-12-08 00:03:41 -05:00
Lukas Matena
4ba7cb7ede
Fix of the wipe tower starting point
...
see issues #2968 , #3234 and #3248
2019-12-04 13:47:02 +01:00
Enrico Turri
ddd1df1552
ENABLE_THUMBNAIL_GENERATOR -> render printbed into thumbnails
2019-11-28 14:18:24 +01:00
YuSanka
dfd38c7818
Merge remote-tracking branch 'origin/master' into ys_color_print_extension
2019-11-28 09:01:14 +01:00
YuSanka
901a20b3b1
Code cleaning
2019-11-27 15:27:44 +01:00
Enrico Turri
6df506e482
ENABLE_THUMBNAIL_GENERATOR -> Thumbnails generated using a callback function
2019-11-22 12:39:03 +01:00
YuSanka
bc68b8eaf2
ExtruderSequenceDialog :
...
Fixed layouts after the second opening of the dialog.
(Removing any extruder from the sequence does not cause an incorrect layout)
Validation of entered values added
(0 is not a valid value)
2019-11-16 02:12:37 +01:00
Lukas Matena
88514eeb0e
Merge branch 'lm_low_wipe_tower'
2019-11-14 10:37:04 +01:00
YuSanka
f2120c1122
Fixed a sequence of the legend items
2019-11-07 16:36:24 +01:00
YuSanka
c4a62819f4
Implemented new color change preview from Gcode
...
+ Added missed "change_extruder.svg"
2019-11-07 08:13:26 +01:00
YuSanka
6ed9adaeff
New legend for color print.
...
Some improvements for coloration multimaterial print indicator
2019-11-05 09:48:53 +01:00
Enrico Turri
418634a677
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-10-31 16:41:03 +01:00
Lukas Matena
d632d91e79
WipeTower.cpp: The M220 B/R gcode is only emitted for Marlin firmware flavor
...
The extended gcode is now only supported by Prusa (https://github.com/prusa3d/PrusaSlicer/issues/3114 )
A pull request https://github.com/MarlinFirmware/Marlin/pull/15739 aims to extend the gcode in upstream Marlin as well
2019-10-31 15:08:20 +01:00
Enrico Turri
2896e12a46
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-10-29 07:09:07 +01:00
bubnikv
9e8ce66f70
Fix / improvement of unit tests.
2019-10-25 19:06:40 +02:00
Enrico Turri
4d1153c866
ENABLE_THUMBNAIL_GENERATOR -> WIP: Refactoring and preparation for adding thumbnails to exported gcode and 3mf files
2019-10-23 13:31:24 +02:00
Enrico Turri
32a42f2808
Added tech ENABLE_THUMBNAIL_GENERATOR -> 1st installment of generation of thumbnail from plater (WIP)
2019-10-22 16:02:31 +02:00
Enrico Turri
2d610f9b84
#3082 - Workaround to fix incorrect object position after applying gcode line G92 into custom gcode
2019-10-21 10:12:42 +02:00
Enrico Turri
0285e8db2d
Merge branch 'et_git_3010' of https://github.com/prusa3d/PrusaSlicer
2019-10-18 12:48:06 +02:00
bubnikv
abe856f9fe
Ported remove_collinear(Polygon) and test_polygon from upstream slic3r.
2019-10-15 18:08:32 +02:00
Enrico Turri
658b1e219e
ENABLE_GIT_3010_FIX set as default
2019-10-14 10:03:27 +02:00
Enrico Turri
76c9ddfd3e
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_git_3010
2019-10-14 08:49:19 +02:00
Lukas Matena
cf030e8958
Simplified inclusion of the wipe tower into skirt calculation
2019-10-08 14:12:40 +02:00
Lukas Matena
fdf9272fbe
Wipe tower brim width is now part of WipeTowerData class, so it can be used wherever needed
2019-10-08 13:50:51 +02:00
Thomas Moore
aba743de41
Include wipe tower in skirt
2019-10-08 11:06:55 +02:00
Lukas Matena
61cee54dd3
Merge branch 'master' into lm_low_wipe_tower
2019-10-01 13:24:25 +02:00
Lukas Matena
b5e3899267
Wipe tower: Sparse layers are not included in filament consumption in case that the 'no sparse layers' option is set
2019-10-01 11:41:37 +02:00
Enrico Turri
8d53c5e978
#3010 - Added tech ENABLE_GIT_3010_FIX - GCodeAnalyzer and GCodeTimeEstimator modified to properly process gcode lines G92
2019-10-01 09:48:42 +02:00
bubnikv
272479826f
Refactoring of the G-code preview for lower memory allocation
...
and for separation of concerns:
The final G-code preview no more uses ExtrusionPaths structure
to hold the G-code path data extracted by parsing the G-code.
Instead, the ExtrusionPath class has been trimmed down back to
the original size before the G-code preview was introduced,
and a new GCodePreviewData::Extrusion::Path class was created to hold
the additional path data as the extruder ID, color change ID
and fan speed.
2019-09-30 16:25:26 +02:00
bubnikv
b425ee50a9
Merge remote-tracking branch 'remotes/origin/et_pull_2922'
2019-09-30 10:23:16 +02:00
Lukas Matena
7861fa5086
Whitespace changes to supress misleading indentation warnings
...
These appear in newer gcc when spaces and tabs are mixed
2019-09-24 16:01:01 +02:00
Enrico Turri
82a52e8b21
#2922 - Port of commit: f42edd35ce
by jschuh
2019-09-23 14:56:27 +02:00
YuSanka
4aec14ddab
Replace "mm3/s" with "mm³/s" in preview legend for a "Volumetric flow rate"
2019-09-23 11:11:43 +02:00
bubnikv
ae3a3029c0
Merge remote-tracking branch 'remotes/origin/master' into dev
2019-09-13 18:58:39 +02:00
bubnikv
d86cf1e116
Fix of a regression in wipe tower generator:
...
Return to the known position after custom tool change G-code.
2019-09-13 18:56:37 +02:00
bubnikv
b4f2df6a98
Merge remote-tracking branch 'remotes/origin/master' into dev
2019-09-12 10:19:09 +02:00
Enrico Turri
af77eca9df
Follow-up of 44c3493f7d
-> error message logged only for multi-extruder printers
2019-09-11 10:02:27 +02:00
Enrico Turri
84f589ad5c
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into dev
2019-09-11 09:15:58 +02:00