3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,736 Commits 3 Branches 78 Tags 40 MiB
8771519880
Commit Graph

3767 Commits

Author SHA1 Message Date
D.R.racer
dbb0269bd4 Make indentation consistent with surrounding code in factory_reset() 2021-02-17 08:27:49 +01:00
3d-gussner
afc15b42bb Indentations 2021-02-17 08:13:32 +01:00
3d-gussner
59c2b7e795 Fix Fan error issues. 2021-02-17 07:42:12 +01:00
3d-gussner
66ea1bdfba Indentations 2021-02-16 12:31:23 +01:00
3d-gussner
d6c6517fcd Back to Status after Resuming 2021-02-16 07:27:46 +01:00
3d-gussner
c2637d9430 Documentation Show Main Menu 2021-02-15 18:35:04 +01:00
3d-gussner
c07bcd172a Fix NO Stop print during MBL 2021-02-15 18:34:08 +01:00
3d-gussner
583993b7e2 Back to "Status" after gcode M0/M1 2021-02-15 15:25:04 +01:00
3d-gussner
25928232e4 Merge remote-tracking branch 'upstream/MK3' into MK3_PFW-960 2021-02-15 13:06:47 +01:00
3d-gussner
9071a9f8fd Gcode M1 must have a string while M0 it is optional 
As the `M0/M1` moved to the beginning of the parser
- parser would not be able to "find" `M1nn` command if the query was `M1` instead of `M1 `
- to be able to "stop/halt" without sending a string and display default message use gcode `M0`
- as there are no `M0nn` gcodes the parser can query `M0` without additional space needed as in `M1 `
 2021-02-15 12:51:12 +01:00
3d-gussner
fc270a356a Fix indentations 2021-02-15 12:50:40 +01:00
DRracer
86e117679c
Merge pull request #3011 from 3d-gussner/MK3_translation_0121 
Fix few translations introduced with #2982
 2021-02-15 11:16:54 +01:00
3d-gussner
c95a8e13d7 Fix indentations to 4 spaces per tab 2021-02-12 11:47:02 +01:00
3d-gussner
f810047a5c Switch between Remaing and Change time every few seconds 
- If `M73` `R,S,C,D` values set the LCD Info screen clock switchs between Remaining and Change time
- If Remaining time is 0 while Change time is >0 the clock switchs between Change time and actual printing time
- If Change is 0 while Remaining time is >0 the clock shows the Remaining time
- If both are 0 the clock shows the actual printing time
- `M73 C` values are shown in "Normal" mode
- `M73 D` values are shown in "Stealth" mode
- Changing the speed will try to calculate the espected times and show `?` behind `R` or `C`
 2021-02-12 11:29:47 +01:00
3d-gussner
d2e60aee90 Use CLOCK_INTERVAL_TIME 2021-02-11 10:45:26 +01:00
3d-gussner
cf982b0d4d Fix timer issue 
The remaining time stays for ~5 seconds while the change time stays just for ~1 second
 2021-02-11 10:20:06 +01:00
3d-gussner
14b4bf5fa5 Add CLOCK_INTERVAL_TIME and ShortTimer IntervalTimer 2021-02-11 07:47:44 +01:00
3d-gussner
b9a3fa2ddd fix time at speed 2021-02-11 07:47:44 +01:00
3d-gussner
b13d4b71d4 Add Change time behind existing message 2021-02-11 07:47:44 +01:00
3d-gussner
4998cfb70d Fix printing time being shown without M73 gcode 
Adjust estimated times only if speed is changed. Printing time has to stay printing time.
 2021-02-11 07:47:43 +01:00
3d-gussner
d063ffb141 Add parameter D to gcode M73 for silent/stealth mode 2021-02-11 07:47:43 +01:00
3d-gussner
83e791cbbe Fix temp Build number 2021-02-11 07:47:43 +01:00
3d-gussner
91c767b0f2 Reduce code size 2021-02-11 07:47:43 +01:00
3d-gussner
ae48e7c3ce indentation 2021-02-11 07:47:43 +01:00
3d-gussner
f4ca6ee59d Fix typo 2021-02-11 07:47:43 +01:00
3d-gussner
cca90da64b Include silent mode on time change 
- depends on difference between print time remaining NORMAL vs SILENT mode
 2021-02-11 07:47:43 +01:00
3d-gussner
cb61436093 Add remaining time to change/pause/user interaction to LCD Info screen 
- Add parameter `C` to gcode `M73`
- LCD Info screen switches to change time if last `M73` gcode contains `C` parameter
  - Examples:
    - `M73 P5 R120` will display on LCD ` SD  5%      02:00R ` if it is printing at 100% speed
    - `M73 P5 R120 C60` will display on LCD ` SD  5%      01:00C ` if it is printing at 100% speed

Slicers can generate "Time to change/pause/user interaction" using `C<mins:0-65535>` parameter to "overwrite" the remaining print time.
To switch between time to change and remaining time just send in intervals `M73` with or without `C` parameter.
 2021-02-11 07:47:43 +01:00
Alex Voinea
1c1ff722c0
Move sort_order to stack during ::presort 2021-02-10 18:16:26 +02:00
Alex Voinea
8397dae386
Remove comment 2021-02-10 18:15:18 +02:00
Alex Voinea
b4de57c365
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION 2021-02-10 17:08:28 +02:00
Yuri D'Elia
e010ca8ceb Fix conflicting extern/inline declarations 
The functions find_bed_induction_sensor_point_* have conflicting
extern and inline declarations.

These are used outside of the compilation unit only, and thus there's no
point in defining them inline.

This causes a compilation failure at O1 and above, which is strangely
avoided at Os.
 2021-02-10 14:50:13 +01:00
Alex Voinea
a95d497289
Remove commented out code and deprecated comments 2021-02-10 13:45:30 +02:00
Alex Voinea
8a068d4d36
Remove redundant position=0 in ::presort 2021-02-10 13:44:39 +02:00
Alex Voinea
b72ce00183
Reduce reserved space on stack for LONG_FILENAME_LENGTH by 1 in presort 
LONG_FILENAME_LENGTH already includes a +1 for the \0 string termination
 2021-02-10 13:43:46 +02:00
D.R.racer
7ad922e87b Report fname instead of name 
looks like being omitted in MK3 upstream fixes
 2021-02-10 12:38:04 +01:00
D.R.racer
8d39880abf Fix compilation against latest MK3 branch 2021-02-10 12:23:02 +01:00
DRracer
7aa4595211
Merge branch 'MK3' into thumbnails2 2021-02-10 12:15:57 +01:00
D.R.racer
c1ead75a73 Remove commented debug code 
the whole PR is ready for review after successfull tests
 2021-02-10 11:18:59 +01:00
3d-gussner
8bc46248f6 avoid having the block body twice in the code. Thanks to @DRracer 2021-02-10 11:09:29 +01:00
3d-gussner
e5711ea84f Indentation to 4 spaces for tabs 2021-02-10 11:03:23 +01:00
Alex Voinea
a830d5b6b7
getfilename_next 2021-02-09 20:31:02 +02:00
Alex Voinea
8d1c5cbb27
Fix position table offset 2021-02-09 20:29:06 +02:00
Alex Voinea
e6ffc99ff5
Fix compiler bug ... again ... 
:endit: :blobhydraulicpress:
 2021-02-09 16:28:13 +02:00
Alex Voinea
d2a7c62b50
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION 2021-02-09 16:17:43 +02:00
DRracer
a47c971c75
Merge pull request #3010 from leptun/MK3_fix_M23 
Fix M23
 2021-02-09 15:06:51 +01:00
Alex Voinea
4fcbf95db6
apply RAII principle on the lsDive recursion limiter 2021-02-09 15:00:46 +02:00
D.R.racer
9ccda4c57f Optimize code size 
... looks like I've been able to reduce the code by 80B by using the
clamp999() function. There are other spots this function can be used as
well, I didn't touch those yet.
 2021-02-09 09:10:23 +01:00
DRracer
e491b53f48
Merge branch 'MK3' into MK3_Fix_LCD_stats 2021-02-09 08:53:32 +01:00
DRracer
5c3683b4ad
Merge pull request #3022 from 3d-gussner/PFW-1182 
PFW-1182 Fix too long translations during Load/Unload Filament
 2021-02-09 08:24:31 +01:00
DRracer
d5d44d30a7
Merge pull request #2305 from 3d-gussner/MK3-Fix_M120_M121 
Follow RepRap Wiki G-codes documentation
 2021-02-09 07:52:14 +01:00
D.R.racer
3668cdeb30 Add Service prep. item into Factory reset 
upon request from our Service dept. - it is to do the same stuff like
Shipping prep., but keep the printer's stats intact. Still, this has to
be verified and may undergo some further changes.
 2021-02-08 17:27:32 +01:00
D.R.racer
5f49d65546 Farmers' request - allow file sorting menu item 2021-02-08 15:43:08 +01:00
3d-gussner
92db282eca Merge remote-tracking branch 'upstream/MK3' into PFW-960 2021-02-08 12:48:27 +01:00
3d-gussner
aecbd7ab49 Fix c=aa location in lang files 
Fix too long translations in Spanish and Italian
 2021-02-08 12:17:41 +01:00
3d-gussner
214695105c Fix issue #2958 2021-02-08 11:33:46 +01:00
3d-gussner
fb39e7296b Uniform message Press the knob 2021-02-08 10:58:41 +01:00
Alex Voinea
c739aa9003 M23 full path support. 2021-02-07 21:51:44 +02:00
Alex Voinea
f5cde38a7c Remove duplicit debug line 2021-02-06 21:06:37 +02:00
Voinea Dragos
77a5082b56 Fix presort_flag duplicate declaration 2021-02-06 17:25:17 +02:00
Voinea Dragos
52f7a71dce More fixes that were extracted from #2405 2021-02-06 14:59:11 +02:00
Voinea Dragos
f343e6432a Fix diveSubfolder string termination 2021-02-06 12:55:51 +02:00
DRracer
2dfe21358f
Merge pull request #2838 from wavexx/m204_travel_acceleration 
Implement M204 T (separate travel acceleration)
 2021-02-05 16:27:50 +01:00
DRracer
77eb10000c
Merge pull request #2948 from 3d-gussner/PFW-1168 
PFW-1168 Move Z up running xyz calibration
 2021-02-05 16:18:07 +01:00
Alex Voinea
84d043d41b Fix WorkDirDepth limit (for good this time) 2021-02-04 17:52:42 +02:00
Alex Voinea
90c0f33bc5 Fix farm filename when LFN is missing 2021-02-04 16:40:15 +02:00
Alex Voinea
080c44cb2e Undo stupid hack for an error because of some compiler issue in the past 2021-02-04 16:37:24 +02:00
Alex Voinea
df163066fb Fix "sorting files" messages for both ShellSort and BubbleSort 2021-02-04 15:44:15 +02:00
Alex Voinea
279c0aaa21 Fix double '>' bug and brutal refactoring 2021-02-04 14:21:37 +02:00
Yuri D'Elia
640e8d899b Don't scroll one character past the filename end 2021-02-04 13:33:20 +02:00
Alex Voinea
8445f76eb9 Restructure for loop to work correctly in reverse 2021-02-04 13:26:15 +02:00
Alex Voinea
3c5c1e5167 Use enum for menu state code readability 2021-02-04 13:19:22 +02:00
Alex Voinea
ffc3a445ca Remove even more dead code 2021-02-04 11:35:15 +02:00
Alex Voinea
d25b4a6bc9 Remove dead code (SDSORT_GCODE) 2021-02-03 19:18:13 +02:00
Alex Voinea
e52e68d4c1 Merge branch 'MK3' into MK3_NEW_SD_COMPILATION 2021-02-03 18:30:36 +02:00
Alex Voinea
4c977cc335 Merge branch 'MK3' into MK3_NEW_SD_COMPILATION 2021-02-03 18:28:18 +02:00
Yuri D'Elia
186ce0f4b3 Handle acceleration settings in UVLO/power panic 
Acceleration settings need to be saved in UVLO, since these are often
changed/set during a print. This is especially important for travel and
retract acceleration, which is usually set once per-print.

Saving and restoring is not 100% correct.

We save the current front-end value, which might ahead of the backend
when UVLO is triggered. Print acceleration, likely the most significant,
should be saved in the block buffer to be accurate.

Acceleration needs to be restored after the UVLO Z repositioning is
performed, using an M204 command. This is correct, however we don't save
the _temporary_ max acceleration limits set via M201, which could be
higher than the saved limits (via M500). This could result in lower
clamped values compared to the original print.

Maximum acceleration/jerk/feedrate limits should _all_ be saved in UVLO
in the future.
 2021-02-03 11:28:51 +01:00
Yuri D'Elia
f7542aa064 Report travel acceleration in M503 
Use the new M204 format consistently also in M503's output
 2021-02-03 11:20:28 +01:00
Yuri D'Elia
76911f67db Take advantage of the new is_uninitialized function 
Save some space and perform some cleanup
 2021-02-03 11:20:28 +01:00
Yuri D'Elia
45811f82aa Initialize default travel_acceleration from EEPROM 
When reading uninitialized memory, preset the travel acceleration to be
the same as the default acceleration.
 2021-02-03 11:20:28 +01:00
Yuri D'Elia
5589954b77 Add DEFAULT_TRAVEL_ACCELERATION in all variants 
Use the same value as DEFAULT_ACCELERATION for compatibility.
 2021-02-03 11:20:28 +01:00
Yuri D'Elia
1c76152e62 Implement separate travel acceleration (M204 T) 
Allow to separate extrusion and travel acceleration settings using M204,
as Marlin 1.1.x and 2.x does using M204 T.

This allows to reduce the number of instructions required during
printing, since resetting the acceleration for travel moves is no longer
required and can be done a single time during the print.

Provision for this parameter was pre-existing, but not implemented.
M204 has two forms: the lagacy format (Marlin <1.1):

  M204 S[print-acc] T[retract-acc]

and the newer format:

  M204 P[print-acc] R[retract-acc] T[travel-acc]

The distinction in the MK3 FW is done based on the presence of the P
parameter. If P is seen, the new format is adoped. In the new format
however, M204 T was ignored until this change.

To keep backward compatibility, M204 S[acc] will set both print and
travel acceleration, which is identical in behavior to recent versions
of Marlin.
 2021-02-03 11:20:28 +01:00
3d-gussner
2ba24fe0d4 Add pause/resume to USB/host prints via LCD menu 
Depending if SD or USB/host print the firmware sends
- SD print: `// action:paused` or `// action:resumed` are send to inform USB/Host
- USB/host print: `// action:pause` or `// action:resume` are send to trigger the USB/host to handle it

- USB/host must handle `// action:pause` and `// action:resume` correctly to work
  - Tested with Octoprint
    - It handles every thing correctly
    - Any combination of Octoprint and/or LCD `pause` and `resume` working correctly
  - Tested with Pronterface
    - It pauses BUT doesn't send the printer in pause position, and so it is not possible to `resume` from LCD menu
    - I guess some Macros can fix that.
  - Repetier Host/Server documentation shows that it should work. Not tested.

Could save 56 bytes in first step and additional 38 bytes adding `MSG_PAUSE_PRINT` to messages.c/.h

Updated `lang_en*.txt`
@todo Polish translation is 19 characters long (it still fits) BUT should be corrected to 18 chars.
 2021-02-03 11:00:26 +01:00
Alex Voinea
896f4e1dd1 Fix compile error 2021-02-02 19:14:05 +02:00
Alex Voinea
f6ae379077 Fix dir_names array definition. Prevents overrun 2021-02-02 19:08:44 +02:00
Alex Voinea
5c9d202871 Change MAX_DIR_DEPTH from 10 to 6 
You can't run M23 with so many directories as the length of the command will exceed the maximum allowed by cmdqueue
 2021-02-02 19:08:19 +02:00
3d-gussner
57e730c80c Merge remote-tracking branch 'vojtech-pavlik/MK3' into MK3_Test_PRs 
Fix merge issues PR1900
 2021-02-02 13:49:34 +01:00
Alex Voinea
647cde0cae Add documentation 2021-02-02 13:38:20 +02:00
Alex Voinea
2f4119a6d7 M552 - Printer IP address 2021-02-02 13:21:16 +02:00
DRracer
2b81abb24c
Merge pull request #2814 from wavexx/MK3_PAT9125_I2C 
Use hardware TWI for the PAT9125 (optical) filament sensor
 2021-02-02 09:15:35 +01:00
D.R.racer
15d76a7501 Remove duplicit incrementation of consecutive comment lines 
It was left in the code in one of the refactoring/optimization passes.
It really didn't do any harm, but was limiting the performance of the
skipping algorithm.

+ some verification code added - will be removed after successful tests
 2021-02-02 07:57:06 +01:00
DRracer
40e45c5eaa
Merge pull request #3009 from leptun/PFW-1144-LongPathName 
"M27 P" support. Get current file absolute filename (file path)
 2021-02-01 14:41:15 +01:00
DRracer
58c217a340
Merge pull request #2988 from leptun/PFW-1171-EEPROM_SN 
Cache SN to EEPROM on startup
 2021-02-01 14:24:13 +01:00
Alex Voinea
7e09df6a34 Add documentation 2021-02-01 14:54:44 +02:00
Alex Voinea
b6d56bc0f4 Change M27 argument from L to P as that makes more sense (path vs LFN)) 2021-02-01 14:54:37 +02:00
Yuri D'Elia
ec4c1be058 Silence bUpdateEEPROM unused warning in MK3 variant 2021-02-01 07:09:44 +01:00
Voinea Dragos
30131c9ab5 Patch broken string PROGMEM transition with setTargetedHotend() error 2021-02-01 06:12:37 +01:00
Voinea Dragos
ea44d78d68 Merge branch 'MK3' into PFW-1171-EEPROM_SN 2021-01-31 17:19:00 +02:00
Voinea Dragos
698499f00d split timer0 and timer2 initialization. Move timer2 init early 2021-01-31 17:18:32 +02:00
Voinea Dragos
6b6205d2f6 M27 refactoring and M27 L initial implementation 2021-01-31 15:06:20 +02:00
Yuri D'Elia
b8b75186fe Remove the extra copy of CRITICAL_SECTION from fastio 2021-01-29 18:30:16 +01:00
Yuri D'Elia
31b3ad0613 Merge remote-tracking branch 'upstream/MK3' into MK3_PAT9125_I2C 2021-01-29 18:28:55 +01:00
Yuri D'Elia
2d71a071f0 Switch twi.c to fastio 2021-01-29 17:51:38 +01:00
Yuri D'Elia
1fa7b8cd8d Move SDA/SCL pins into pins.h for fastio compatibility 
fastio relies on macros for pin definitions, so we cannot use the const
declaration in Sd2PinMap or the arduino's definition.

Declare SDA/SCL_PIN into pins.h based on the current MCU, which is
identical in all our variants.

Remove the conflicting/unused declaration in Sd2PinMap.
 2021-01-29 17:48:59 +01:00
Yuri D'Elia
30262b0a6e Remove redundant definitions of CRITICAL_SECTION_* 
Move CRITICAL_SECTION_START/END into fastio.h, where it's needed.
 2021-01-29 17:30:04 +01:00
3d-gussner
d75a0fdcbd Merge remote-tracking branch 'upstream/MK3' into MK3_translation_0121 2021-01-29 15:38:48 +01:00
DRracer
42311db5f1
Merge pull request #2789 from wavexx/MK3_TMC2130_DEDGE 
Use/enable TMC2130 DEDGE support in MK3/MK3S
 2021-01-29 11:13:09 +01:00
D.R.racer
caf58b16b6 Fix handling EOF 
+ save ~160B by using local variables
+ rename some of the vars to more descriptive names
+ remove consecutiveEmptyLines handling from cmdqueue
 2021-01-29 08:29:51 +01:00
Yuri D'Elia
e9d5c44732 Also toggle pins efficiently in sm4.c 
Use the same technique used in fastio to toggle pins efficiently in sm4
when DEDGE is used.
 2021-01-29 00:13:49 +01:00
D.R.racer
6c9c1423c6 Remove temporary changes from SdBaseFile.h 2021-01-28 09:42:50 +01:00
D.R.racer
71d825d0f2 Return SdBaseFile into previous state 
no changes necessary afterall
 2021-01-28 09:41:30 +01:00
D.R.racer
7279de7403 Separate reading G-code files and writing to a file 
- extract common strings
- cleanup openFileWrite and openFileReadFilteredGcode formatting a bit
Alltogether - code size 400B down
 2021-01-28 09:37:58 +01:00
D.R.racer
c05b625b1c Fix occasionally skipped valid G-code lines 
which also allowed for removal of the pre-increment -> post-increment
workaround
 2021-01-28 08:13:16 +01:00
D.R.racer
d1fd5a555f Clean up gfReset() 2021-01-27 14:12:11 +01:00
D.R.racer
b2cf5b7b6c Fix seekSetFilteredGcode() 
+some more debug code which will vanish after all is done and verified
 2021-01-27 13:01:25 +01:00
D.R.racer
b6c59e08ac Workaround ++gfCacheP into postincrement ld r22, Z+ 
TODO: ideally improve the automaton to work with postincrement only, at
least in this case.
 2021-01-27 09:52:20 +01:00
D.R.racer
d275fe0e83 Extract gcode filter from SdBaseFile into SdFile + optimization 
- Start saving instructions as the whole PR was >1KB long.
- It turned out the compiler was unable to understand the core skipping
cycle and an ASM version had to be used.
- Add seekSet aware of the G-code filter
 2021-01-27 09:33:28 +01:00
D.R.racer
c3758d350e Fast skipping of large comment blocks 
This is an extension/optimization of PR #2956.
It uses the cached 512B block buffer to avoid heavy-weight read() in SdBaseFile.
Even though this principle allowed the AVR to skip ~600KB of data within ~5 seconds,
the impact on code base is huge, especially into well proven and long-term stable
parts like reading a file from the SD card.

The sole purpose of this PR is to show/verify the possibility of the AVR CPU
in relation to adding thumbnails into MK3 G-codes.
Moreover, this PR shall not be merged unless the missing/commented features
are restored - especially file seeking and M84 search.

PFW-1175
 2021-01-27 07:03:51 +01:00
D.R.racer
dcc6605809 Workaround for skipping large comment blocks 
If there are large blocks of comments in the G-code,
the printer may get shot down by its own watchdog.
Watchdog is generally set to 4s and updated only
in manage_heaters (and some other spots in some specific cases).

So far, the code reading the file and feeding it into Marlin
cycles indefinitely until it finds valid G-code lines and fills up the
command queue.

If the block is large enough, the printer cannot read it completely
within those 4s.

A simple workaround - bail out after some consecutive empty/comment
lines to enable other parts of code do their job (especially
manage_heaters).

Tested on MK404, previous FW fails with 600KB of comment lines at the
beginning, this patch survives. The printer even draws some update
on its status screen before starting a real print.
 2021-01-27 07:03:51 +01:00
Yuri D'Elia
a9625747db Reinstate the nop instruction as delay in non-DEDGE 
When TMC2130_MINIMUM_PULSE is 0 a minimum delay is implied.
In this case, use a single "nop" instruction.
 2021-01-26 19:43:29 +01:00
Yuri D'Elia
d3734b02cc Also fix delay instances inside unused BACKLASH_[XY] 2021-01-26 16:18:23 +01:00
Yuri D'Elia
b17cdcd4d7 Ensure MINIMUM_PULSE is always 0 in DEDGE mode 
This ensures delays are always properly elided without having to check
for DEDGE all over the place.
 2021-01-26 16:12:59 +01:00
Yuri D'Elia
2a6989ecd5 Remove TMC2130 special-cases 
With the new STEPPER_MINIMUM_DELAY being automatically removed for
TMC2130 we no longer need to add specialized #ifdefs for DEDGE in
babystep.
 2021-01-26 16:09:23 +01:00
Yuri D'Elia
4fed728e08 Elide delayMicroseconds for TMC2130 in non-DEDGE mode 
Introduce new macros TMC2130_MINIMUM_DELAY/STEPPER_MINIMUM_DELAY for
blocking pauses.

If MINIMUM_PULSE has defined to be zero, avoid the delay call entirely.
 2021-01-26 16:02:53 +01:00
3d-gussner
f40c593d11 Fix few translations not being used due to spaces or upper case 2021-01-26 14:15:34 +01:00
D.R.racer
c28e5a9dbc Farmer's request 2 
Farmers request having the Change filament menu item always visible in
the main menu and located after the Live Adjust Z (which disappears
after the first few printed layers).
 2021-01-26 12:19:41 +01:00
DRracer
bfe93d3959
Merge pull request #2951 from DRracer/pvb-08 
Add PVB preheat and 0.8mm nozzle presets
 2021-01-26 12:09:41 +01:00
3d-gussner
ad5d068690 Update char lengths part 1 
Fix some too long translations
 2021-01-26 12:09:35 +01:00
DRracer
891f37a622
Merge pull request #2982 from DRracer/codesize 
Reduce code size and RAM usage
 2021-01-26 12:04:39 +01:00
3d-gussner
c555907a12 Remove duplicate string G-code sliced for a different printer type. Please re-slice the model again. Print cancelled. using MSG_GCODE_DIFF_PRINTER_CANCELLED 2021-01-26 11:01:50 +01:00
3d-gussner
51d1e0bd8a Remove duplicate string G-code sliced for a different printer type. Continue? using MSG_GCODE_DIFF_PRINTER_CONTINUE 2021-01-26 10:42:56 +01:00
3d-gussner
7916f8b9e8 Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize 2021-01-26 10:13:11 +01:00
D.R.racer
0eb7261e29 Save ~100B on menu implementation 2021-01-26 09:29:17 +01:00
3d-gussner
ba8386573a Remove duplicate string Resume print using MSG_RESUME_PRINT 2021-01-26 09:23:55 +01:00
3d-gussner
c6a01b3806 Remove duplicate string Reset using MSG_RESET 2021-01-26 09:15:46 +01:00
3d-gussner
ab5aad636f Remove duplicate string Mesh Bed Leveling and Mesh bed leveling using MSG_MESH_BED_LEVELING 
Fixed few too long translations
 2021-01-26 09:05:38 +01:00
DRracer
f4cee7ce84
Merge pull request #2983 from leptun/MK3_fix_sm4.h_line_ending 
Fix sm4.h line ending
 2021-01-26 08:45:07 +01:00
DRracer
bce9f8c949
Merge pull request #2984 from leptun/MK3_Serial_LF_only 
Do not send CR on the serial line
 2021-01-26 08:42:47 +01:00
DRracer
c465417f50
Merge pull request #2987 from leptun/PFW-1144-LongPathName 
"M20 L" support. Print long filenames
 2021-01-26 08:40:26 +01:00
3d-gussner
84ed0725f2 Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize 2021-01-26 08:32:03 +01:00
3d-gussner
bce8501eea Remove duplicate string Extruder using MSG_Extruder 2021-01-26 08:31:21 +01:00
Voinea Dragos
c6588193ad Fix some more stuff in cardreader.cpp 
Saved 4B of flash and 60B of RAM
 2021-01-26 09:25:41 +02:00
3d-gussner
ab18a3ccc3 Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize 2021-01-26 08:24:11 +01:00
3d-gussner
530b9f50b8 Remove duplicate string Eject filament using MSG_EJECT_FILAMENT 
Fix few translations
 2021-01-26 08:22:08 +01:00
D.R.racer
348902240e Fix code_seen_P("fv") broken by one of the merges 2021-01-26 08:02:33 +01:00
3d-gussner
269fabc330 Remove duplicate string Cut filament using MSG_CUT_FILAMENT 2021-01-26 07:15:46 +01:00
3d-gussner
797d8e74a3 Remove duplicate string Checking X axis and Checking Y axis using MSG_CHECKING_X and MSG_CHECKING_Y 2021-01-26 07:10:57 +01:00
3d-gussner
2d1e1e4cee Remove duplicate string Fans check using MSG_FANS_CHECK 2021-01-25 20:13:12 +01:00
3d-gussner
d117a299f7 Remove duplicate string Fil. runouts using MSG_FIL_RUNOUTS 2021-01-25 20:04:18 +01:00
3d-gussner
10bbd64b41 Remove duplicate string Crash using MSG_CRASH 
Better Italian translation, thanks to @wavexx
Fix Polish translation as it was too long for the menue and caused LCD issues.
 2021-01-25 18:53:53 +01:00
3d-gussner
4878db7365 Remove duplicate string Last print failures using MSG_LAST_PRINT_FAILURES 
Fix too long translations in Spanish and Italian for this message
 2021-01-25 18:38:35 +01:00
3d-gussner
99867c8fbd Remove duplicate string Total failures using MSG_TOTAL_FAILURES 2021-01-25 18:06:47 +01:00
3d-gussner
8f0a45e8a4 Remove duplicate string Steel sheets and Total using MSG_STEEL_SHEETS and MSG_TOTAL 2021-01-25 17:58:51 +01:00
3d-gussner
7222cf05cf Remove duplicate string MMU Fails and MMU Load Fails using MSG_MMU_FAILS and MSG_MMU_LOAD_FAILS 2021-01-25 17:38:36 +01:00
3d-gussner
fbb3fad64b Remove duplicate string Last print using MSG_LAST_PRINT 2021-01-25 16:54:26 +01:00
3d-gussner
7891d12a32 Remove duplicate string Is filament loaded? using MSG_FILAMENT_LOADED 2021-01-25 16:44:55 +01:00
3d-gussner
223f32deae Remove duplicate string HW Setup" using MSG_HW_SETUP` 2021-01-25 16:15:57 +01:00
3d-gussner
5c1da227fe Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize 2021-01-25 16:00:46 +01:00
3d-gussner
377a59c624 Remove duplicate string Belt status 2021-01-25 15:53:31 +01:00
D.R.racer
d8917a304a Reuse lcd_space() instead of in-place printing of spaces in a cycle 
Saves another ~40B
 2021-01-25 15:21:25 +01:00
D.R.racer
783e4bbaf9 Add lcd_putc_at (code down >150B), refactor lcd_selftest_screen_step 
(RAM down 10B)
 2021-01-25 14:58:57 +01:00
DRracer
3975415490
Merge branch 'MK3' into codesize 2021-01-25 12:43:30 +01:00
DRracer
58351fb27a
Merge pull request #2977 from DRracer/farm-patch1 
Farmers' requests
 2021-01-25 11:15:44 +01:00
D.R.racer
514321f2ce Remove farm_no completely + reuse prusa_stat_farm_number() where 
applicable
 2021-01-25 11:09:28 +01:00
Voinea Dragos
2b3729125d Prevent wdt reset during file listing 2021-01-25 11:46:51 +02:00
D.R.racer
c1ff6242b0 Avoid copying FW version number into RAM - use the PROGMEM string 2021-01-25 09:03:04 +01:00
Voinea Dragos
4f769f0faa PRUSA RESET safety precaution 2021-01-25 09:58:12 +02:00
Voinea Dragos
9fa9d6b063 Move farm strings to PROGMEM 2021-01-25 09:48:17 +02:00
D.R.racer
6a62674bd8 Keep PRUSA RESET available even in non-farm mode 2021-01-25 08:43:37 +01:00
D.R.racer
98a4da571d Merge branch 'farm-patch1' of github.com:DRracer/Prusa-Firmware into farm-patch1 2021-01-25 08:39:20 +01:00
D.R.racer
9bfada94f0 Remove commented code 2021-01-25 08:38:44 +01:00
Voinea Dragos
e8e4aabfdb Add gcode documentation 2021-01-22 21:07:14 +02:00
Voinea Dragos
31a6270f69 Abuse \n in lcd printing instead of constantly calling other functions 
"other functions" being lcd_set_cursor and lcd_print(char). Saves 100B of flash
 2021-01-22 20:12:11 +02:00
Voinea Dragos
4d3f056b81 Fix factory reset menu rendering 2021-01-22 20:07:27 +02:00
Voinea Dragos
37c431abd9 another lcd_puts_at_P 2021-01-22 19:44:46 +02:00
D.R.racer
3ccd1b2b2b Refactor lcd_set_cursor + lcd_puts_P -> lcd_puts_at_P 
saves considerable amount of flash
 2021-01-22 18:34:47 +01:00
Voinea Dragos
bc7d36b6ff Fix sm4.h line ending 2021-01-22 18:57:24 +02:00
Voinea Dragos
da21916473 Change printf_P without format arguments and NL to puts_P only 2021-01-22 18:56:05 +02:00
D.R.racer
9b34789398 Cleanup reset_menu() 2021-01-22 17:54:44 +01:00
D.R.racer
90d22a376d Remove unused vars in xyzcal.cpp 2021-01-22 17:50:08 +01:00
D.R.racer
2780a03967 Improve duplicate_Tcode_ignored 
kudos to @leptun
 2021-01-22 17:47:44 +01:00
D.R.racer
3dc85b319c Marlin_main.cpp hacks 
- code_seen("string") -> code_seen_P(PSTR("string")) saved >100B of RAM!
- serial print "." -> '.' saved some code
- extract commonly used string
- SERIAL_PROTOCOLLN("") -> SERIAL_PROTOCOLLN() as no argument is
necessary
 2021-01-22 17:15:36 +01:00
D.R.racer
4dec171266 Reduce code by 104 bytes in xyzcal.cpp 
Extract CLAMP_median into a non-inline function.
The extra instructions to call that function do not matter from the
speed perspective
 2021-01-22 17:13:28 +01:00
D.R.racer
c710253cca Code cleanup and size reduction and RAM optimization 
Replase single character strings with single characters when calling
lcd_print
 2021-01-22 17:11:51 +01:00
Voinea Dragos
9fda6b774d Do not send CR on the serial line 2021-01-22 17:58:01 +02:00
DRracer
f809691003
Merge pull request #2968 from espr14/PFW-1186 
Calibration: reduce code size PFW-1186
 2021-01-22 14:05:13 +01:00
DRracer
eceb7b4e5f
Merge pull request #2981 from 3d-gussner/PFW-1140-2 
PFW-1140 Add fan speed and position auto report
 2021-01-22 13:00:23 +01:00
DRracer
defbaa6ff8
Merge branch 'MK3' into PFW-1186 2021-01-22 12:46:25 +01:00
DRracer
4c952a0a9c
Merge pull request #2962 from espr14/PFW-1178 
Calibration: code cleaning PFW-1178
 2021-01-22 12:41:24 +01:00
3d-gussner
008c6a2590 Remove defines 2021-01-22 12:26:29 +01:00
DRracer
ab59449b7c
Merge pull request #2961 from espr14/PFW-1179 
Calibration: print skew results PFW-1179
 2021-01-22 12:24:52 +01:00
DRracer
85f2c29dfe
Merge pull request #2960 from espr14/PFW-1169-3 
Calibration: more accelerations, fix scan, more robust circle search PFW-1169
 2021-01-22 12:20:35 +01:00
3d-gussner
ede3f34051 Documentation 2021-01-22 10:40:29 +01:00
Voinea Dragos
ced3d9fa77 "M20 L" support. Print long filenames 2021-01-22 11:13:44 +02:00
D.R.racer
31951fe8c9 Code refactoring 
Motivation:
- save some RAM joining the autoreport flags into 1 byte
- encapsulate the magic of setting bit masks/features into a class with
a stable public interface
 2021-01-20 11:46:25 +01:00
Voinea Dragos
70d254a1fc Allow resetting when not in farm mode 2021-01-19 13:39:21 +02:00
Voinea Dragos
48b4bdfe8e Make the PRUSA RESET command functional on the miniRambo 2021-01-19 13:36:08 +02:00
Voinea Dragos
542677c080 Prevent switching to serial port 1 on miniRambo and such 2021-01-19 13:11:48 +02:00
Voinea Dragos
9b847715ac Rename F0 to FRM on the status screen 2021-01-19 13:11:25 +02:00
Voinea Dragos
3f5cfc4e61 Move the change filament button to the main menu when farm printing 
PFW-945
 2021-01-19 13:06:23 +02:00
D.R.racer
a9d8ddc89c Farmers' requests 1 
- remove the UI and related stuff to setting a farm number (the
communication protocol must remain intact)
- remove confirmation after print finished ("Print OK")

Both requests are highly welcome, since they allow for lowering the code
size by >1KB

PFW-963, PFW-927
 2021-01-19 09:58:02 +01:00
3d-gussner
9264454d3a Gcode M123 only if FANCHECK and TACHOs are defined 
Gcode `M155` added parameter "C" to activate auto-report for temperatures, fans and positions
Updated doxygen
@todo Update RepRap Wiki
@todo improve code
 2021-01-19 09:01:46 +01:00
espr14
735895c6bc Use fabs 2021-01-14 16:38:34 +01:00
espr14
ca4e638ea2 Don't use extrusion in XYZ calibration 2021-01-14 13:19:30 +01:00
Alex Voinea
20c3f4cb77 Update comments 2021-01-14 12:53:12 +02:00
Voinea Dragos
dea3f23a69 PRUSA SN in eeprom 2021-01-14 11:52:22 +02:00
espr14
9867ecd3f9 Reduce unnecessary code 2021-01-13 13:59:20 +01:00
espr14
21d6f970ef Fix build 2021-01-12 16:26:46 +01:00
espr14
f3faf651c5 Move down before scanning 2021-01-12 16:12:34 +01:00
espr14
9dceb488b6 Revert double scanning 2021-01-12 16:04:04 +01:00
espr14
546812294e Clean serial output 2021-01-12 00:34:28 +01:00
espr14
d7507649d8 Remove degree char 2021-01-12 00:28:46 +01:00
espr14
180af46fe4 Try double height 2021-01-12 00:27:06 +01:00
espr14
333526f65d Single skew output 2021-01-11 23:14:12 +01:00
espr14
e6e44fe188 Convert to degrees 2021-01-11 23:13:08 +01:00
espr14
b8443b00ad Reverse reverse 2021-01-11 22:18:50 +01:00
espr14
09892bec52 Reverse 2021-01-11 18:46:56 +01:00
Yuri D'Elia
78f8f1e8f9 Remove stray serial newlines in fsensor autoload messages 2021-01-11 18:31:36 +01:00
espr14
211e5f5f37 Define DBG output 2021-01-11 17:31:26 +01:00
espr14
904a23b69e Report calibration results 2021-01-11 17:02:41 +01:00
espr14
2e40a27460 Alignment, comments 2021-01-11 15:40:12 +01:00
DRracer
4728bf2182
Merge pull request #2875 from wavexx/raise_while_preheating 
Raise Z while preheating when auto/[un]loading the filament
 2021-01-11 07:45:54 +01:00
DRracer
1a6b6fb491
Merge pull request #1776 from wavexx/unused_tmc_defines 
Remove an unused define
 2021-01-11 07:43:44 +01:00
DRracer
ef51652e39
Merge pull request #1758 from wavexx/disable_filament_checks_in_extr_menu 
Disable filament checks inside the Move -> Extruder menu
 2021-01-11 07:42:25 +01:00
3d-gussner
a064ce4722 Add gcode M123 Tachometer value 2021-01-10 15:15:44 +01:00
D.R.racer
8a083c9970 Add PVB preheat and 0.8mm nozzle presets 
minor features reflecting the latest announcement

Needs some 300B of CPU flash though, after 3.9.3 we need to optimize code
size again.
 2021-01-08 13:52:39 +01:00
DRracer
5c3513a6cc
Merge pull request #2397 from odaki/flashair_display_ip 
Show the FlashAir IP address
 2021-01-08 12:20:12 +01:00
espr14
584177e8fd Fix E mask 2021-01-08 10:24:36 +01:00
DRracer
f549ce690a
Merge pull request #2949 from prusa3d/MK3_3.9.3 
Merge 3.9.3 back into MK3
 2021-01-08 10:20:40 +01:00
3d-gussner
3329d34ce4 Fix doxygen issue with "^" and "|" only in one line 
Doxygen 1.8.13 had no issues but newer doxygen version are failing
to build tables, if a line only consists of "^" and "|"
 2021-01-08 09:40:13 +01:00
DRracer
0ed6b537a8
Merge branch 'MK3' into MK3_3.9.3 2021-01-07 13:27:51 +01:00
D.R.racer
603d704178 Version changed (3.9.3 build 3556) 2021-01-07 12:50:58 +01:00
3d-gussner
8a27b6abdb Move Z up before xy home running xyz calibration 
to prevent scratches on bed and sheet
 2021-01-07 11:45:40 +01:00
espr14
2981b9e9c5 OctoPrint needs new lines 2021-01-04 14:59:12 +01:00
espr14
cc9e7b9376 Fix comments, remove unused 2021-01-04 13:01:06 +01:00
espr14
49d57ed621 Median dynamic circle 2020-12-30 17:02:31 +01:00
espr14
a9fd09ca3f Implement median 2020-12-30 15:15:17 +01:00
espr14
13fefaa1bf Fix typo 2020-12-30 15:01:32 +01:00
espr14
03b87ae68b Add 8 pixel circle pattern 2020-12-30 13:08:47 +01:00
espr14
c14e725574 Fix moves 2020-12-29 18:27:33 +01:00
espr14
c2ab8785f4 Revert Manhattan 2020-12-29 17:31:34 +01:00
espr14
c1e6567461 Fix step axis coding 2020-12-29 17:17:32 +01:00
espr14
922769cefb axis -> axes 2020-12-29 17:14:18 +01:00
espr14
a01dfe26fe Add Manhattan movement 2020-12-29 17:13:11 +01:00
espr14
6461206e08 Fix direction setting 2020-12-29 14:19:05 +01:00
espr14
b6e78bf900 Fix direction 2020-12-29 14:08:30 +01:00
espr14
c11e8654da Revert both directions, refactor code 2020-12-29 12:39:35 +01:00
espr14
e86ba5e26d Scan only once 2020-12-28 16:45:39 +01:00
D.R.racer
7e02a7f118 Version changed (3.9.3-RC1 build 3555) 2020-12-26 15:45:34 +01:00
DRracer
d61cdf2b88
Merge pull request #2932 from espr14/PFW-1165-2 
Calibration: Turn off speed optimization due to MK2.5 PFW-1165
 2020-12-25 18:22:04 +01:00
espr14
80e32ce1a5 Turn off speed optimization due to MK2.5 2020-12-25 15:27:42 +01:00