3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,363 Commits 1 Branch 1 Tag 249 MiB
102329c54d
Commit Graph

481 Commits

Author SHA1 Message Date
bubnikv
39679f9518 Missed this one at the last check-in. 2016-11-20 12:59:29 +01:00
bubnikv
79f5a16536 Reverted the perimeter generator to not save the perimeter areas. 
These could be calculated from the fill areas if needed.
On the other side, the non-classified (non-split) fill areas are stored
now for use in the "ensure vertical wall thickness" feature,
also the non-split fill areas are re-used when recalculating the infills.
This is safer than trying to stitch the fill region together from the
classified fragments.

Modified the "ensure vertical wall thickness" feature to use the non-split
fill areas instead of perimeter areas for the calculation
of non-supported regions. This is cheaper as the fill areas contain
roughly half the edges.
 2016-11-17 23:22:59 +01:00
bubnikv
c3af189045 Reduced some compiler warnings. 2016-11-16 22:09:00 +01:00
bubnikv
4460b5ce50 re-wrote PrintObject::detect_surfaces_type() to C++, 
Fixed some cracks in the fill surfaces created by rounding all surfaces inside detect_surface_type().

Fixed https://github.com/prusa3d/Slic3r/issues/12
Bridging-Angle not optimal

Extended the "Ensure veritcal wall thickness" mode (merged with the original discover_horizontal_shells function), but this a work in progress. Already Slic3r with "ensure vertical wall thickness" produces less spurious infills inside solids.
 2016-11-10 19:23:01 +01:00
bubnikv
22ca927f12 Reworked the bridge detector to allow searching a single bridging 
direction over multiple regions. This allows a single bridge to be
drawn over holes, which are too close to each other to allow
for separate bridges.
Fixes Bridging-Angle not optimal
https://github.com/prusa3d/Slic3r/issues/12

Re-allowed adaptive infill line width for solid infills. The adaptive
infill line width works in some circumstances, see Issue #15,
but the original implementation often changed the line width too
aggressively. The current implementation limits the line width change
to 20%.
Fixes Gaps between infill and perimeter leads to errors in laydown on following layer
https://github.com/prusa3d/Slic3r/issues/15
 2016-11-08 09:59:25 +01:00
bubnikv
aac968162b Unit test to verify whether Slic3r would hang when croaking from 
a C++ exception handler. This is an unfortunate error in some
Strawberry Perl distributions.
 2016-11-06 17:42:36 +01:00
bubnikv
bfb336df0c Refactored Print::validate() method to not throw an exception, but 
to return a string with an error message instead. This was necessary
to avoid a hang-up on some Strawberry Perl distributions, when
a perl "croak" function is called after a C++ exception is caught.
 2016-11-05 02:23:46 +01:00
bubnikv
6217622865 Hopefully a fix of https://github.com/prusa3d/Slic3r/issues/11 
Replaced eval { die } construct with a bool return value indicating
success or failure of an automatic arrangement of parts on the print bed.

Don't know exactly what is happening here, but throwing a "die" inside
a XS function and then catching it inside an eval {} block is suspcious.
 2016-11-04 15:03:51 +01:00
bubnikv
483a658144 Method ExtrusionEntity::polygons_covered() and derived were split 
into polygons_covered_by_width() and polygons_covered_by_spacing().

Bugfix of ExtrusionLoop::split_at(const Point &point),
where the split ExtrusionPaths were not initialised correctly.
 2016-11-04 00:10:35 +01:00
bubnikv
7b6b609df1 ExtrusionEntity and derived classes: Documented, short methods made 
inline for efficiency and readability, grow() renamed to polygons_covered().
 2016-11-03 10:24:32 +01:00
bubnikv
95ede7c4b8 Rewrote Fill2.pm to C++, deleted Perl infills for good. 
Removed dependency on Perl Math::PlanePath module.
Fixed compilation with Visual Studio and SLIC3R_DEBUG: Visual Studio older than 2015 does not support the prinf type specifier %zu. Use %Iu instead.
C++11 move semantics enabled.
 2016-11-02 10:47:00 +01:00
bubnikv
4e66ed81d2 Fixed the fill density for rectilinear, triangular and cubic infills. 
Initial implementation of the "infill link maximum distance" feature.
Parts of the perimeter connecting two infill lines will be dropped,
if longer than a given threshold.
 2016-10-27 17:03:57 +02:00
bubnikv
4524ecf66b by alexrj: Always convert strings to UTF-8 before passing them to XS 2016-10-24 14:08:22 +02:00
bubnikv
1fb57e439e Defined the +-* operators on Pointf. 
Removed the deprecated VibrationLimit feature.
Added triangle infill.
The Prusa3D fork of Slic3r has been marked as "Slic3r Prusa Edition"
with menus pointing to the prusa3d/slic3r github release page
and Prusa3D drivers downloads page.
 2016-10-21 16:53:42 +02:00
bubnikv
15d3e94a66 Unified the creation of paths of debugging output files 
pointing to a predefined output directory.
 2016-10-21 10:18:01 +02:00
bubnikv
f788f50b5a Disabled asserts in the release build (-DNDEBUG). 
Added a safe variant of offset(const Slic3r::ExPolygon...), which offsets each loop separately.
New functions "remove_sticks" to remove zero area parts of polygons.
New functions "remove_small" and "remove_degenerate" for polygon clean up.
Extended the C++ supports, those are not finalized yet though.
 2016-10-20 13:04:23 +02:00
bubnikv
53907a9cfe Fix of a crash when setting a viewport over an empty platter. 
Exported bounding box 'empty' method to perl.
 2016-10-18 16:44:05 +02:00
bubnikv
7d7f093120 C++ supports sketched, but not finalized yet. Slic3r is still using 
the old Perl supports, but this time with the C++ fillers.
 2016-10-16 16:30:56 +02:00
bubnikv
3a81e6bee4 Bugfix of bottom bridges. If close regions shall be closed by bridges, 
these regions are grown to anchor the bridge lines to the bottom surface.
The grown regions may overlap. In that case the regions are now merged
before the bridging direction is calculated for the merged region.
 2016-09-30 15:23:18 +02:00
bubnikv
403329db49 Misc bugfixes. 2016-09-26 13:58:47 +02:00
bubnikv
790b640521 Visualization of fill surfaces. 2016-09-26 13:56:24 +02:00
bubnikv
e0d1aa8a1a Collect the perimeter surfaces when generating perimeters. 
The perimeter surfaces are later used for performing infill
below overhangs and to maintan configured vertical wall thickness
at sloping surfaces.
 2016-09-26 13:44:23 +02:00
bubnikv
620c6c7378 Ported from the playground branch. Various documentation and optimization. 2016-09-13 13:30:00 +02:00
bubnikv
f518e0675c Initial commit of the new Pressure Equalizer, the EdgeGrid 
signed distance field structure.
The EdgeGrid is used to avoid placing the seams on overhangs.
 2016-09-12 16:25:15 +02:00
bubnikv
9fcc8fe9ae Meged with release_candidate_1_3 2016-09-12 11:29:39 +02:00
Alessandro Ranellucci
9e8022f6f6 More refactoring to medial axis and gap fill, more robust 2016-05-20 17:03:57 +02:00
Vojtech Bubnik
d022493297 Merge remote-tracking branch 'upstream/master' 2016-05-03 22:05:31 +02:00
bubnikv
f767ce816b Optimized and improved rectilinear fill. 2016-04-13 20:45:44 +02:00
Chow Loong Jin
3d73fbf5fd Use float for elapsed_time 
When accumulating elapsed_time from many moves that take less than 1
second, elapsed_time does not get incremented because (unsigned int)0.9
= 0.
 2016-04-13 01:13:42 +08:00
bubnikv
ed83ff37f8 Simulation of extrusion in a plane, useful for finding out under / over-extruions. 2016-04-11 17:10:13 +02:00
bubnikv
9716ee8eca Interface to a filler, ported from Perl to C++. 2016-04-11 17:09:15 +02:00
bubnikv
7da68c91a5 Vojtech likes to use Sublime on Windows to get the wheels rolling. 2016-04-11 17:05:58 +02:00
Alessandro Ranellucci
660b56acb5 Fixed type error 2016-03-26 12:21:54 +01:00
Alessandro Ranellucci
7c8b71012c Force the 'nearest' strategy for starting skirt loops 2015-12-21 15:02:39 +01:00
Alessandro Ranellucci
934bd43e35 More refactoring on Config XS bindings 2015-12-16 12:58:06 +01:00
Alessandro Ranellucci
3c862836f2 Refactored the Config XS bindings 2015-12-16 12:33:19 +01:00
Alessandro Ranellucci
e2f2761a00 One more fix for compilation 2015-12-08 11:07:45 +01:00
Alessandro Ranellucci
4913e90e10 Remove any Perl related code from libslic3r 2015-12-08 00:39:54 +01:00
Alessandro Ranellucci
3fac8cd77e Large refactoring of the Config classes 2015-12-07 19:39:49 +01:00
Alessandro Ranellucci
7e1fac8f76 Separate libslic3r code from slic3r application code 2015-12-06 12:54:01 +01:00
Alessandro Ranellucci
e2b203ba8d Disable screensaver while projecting (untested on Windows) 2015-12-04 21:25:45 +01:00
Alessandro Ranellucci
7523550066 Try to fix compilation on older Perls 2015-12-02 19:57:03 +01:00
Alessandro Ranellucci
1bebe6097b Make test happy 2015-12-02 19:39:16 +01:00
Alessandro Ranellucci
4f8a18bbad Ported Layer::maker_perimeters() to XS 2015-12-02 19:32:57 +01:00
Alessandro Ranellucci
3a9cf91f83 Ported a couple more methods to XS 2015-12-02 18:29:33 +01:00
Alessandro Ranellucci
ed75219215 Ported mode Model methods to XS 2015-12-02 18:06:18 +01:00
Alessandro Ranellucci
dfce3a3138 Ported _arrange() and arrange_object() to XS 2015-12-01 21:51:16 +01:00
Alessandro Ranellucci
9febb10bd7 Smoother manual control movements 2015-11-08 10:20:47 +01:00
Alessandro Ranellucci
9a8724cdd0 More compilation changes for Win32 2015-11-06 11:51:24 +01:00
Alessandro Ranellucci
9f9b5afedb Merge branch 'master' into sender 2015-11-05 11:04:01 +01:00
Alessandro Ranellucci
61f0a9e4da Replace the flip word with mirror. #3060 2015-11-04 23:11:30 +01:00
Alessandro Ranellucci
f8d2c69713 Fixed compilation warnings and a potential bug in MotionPlanner, as reported in #3054 2015-11-04 20:50:32 +01:00
Alessandro Ranellucci
9ee6829ebc Implemented connection timeout in C++ 2015-11-02 20:36:36 +01:00
Alessandro Ranellucci
fc1a7471cf Several improvements to the print job queue 2015-11-02 01:18:05 +01:00
Alessandro Ranellucci
9b21ac877a Merge branch 'master' into sender 
Conflicts:
	Build.PL
	lib/Slic3r.pm
	xs/MANIFEST
	xs/src/libslic3r/PrintConfig.hpp
 2015-11-01 19:12:13 +01:00
Alessandro Ranellucci
9fcec10737 Finished porting LayerRegion to C++ 2015-10-26 23:24:46 +01:00
Alessandro Ranellucci
6ac79e3ed6 Ported make_perimeters() to C++ 2015-07-23 16:27:21 +02:00
Alessandro Ranellucci
b4515cf695 Finished porting PerimeterGenerator to C++ 2015-07-23 15:53:02 +02:00
Alessandro Ranellucci
3e739b87da Finished porting Slic3r::GCode to XS (speed boost!) 2015-07-02 20:24:16 +02:00
Alessandro Ranellucci
0ad4296aaf Ported GCode::set_extruders() and GCode::change_layer() to XS 2015-07-02 19:33:08 +02:00
Alessandro Ranellucci
9a17efc480 Use GCodeWriter for path segments (refactoring) 2015-07-02 19:14:55 +02:00
Alessandro Ranellucci
fbd640fdc5 Ported GCode::extrude_path() to XS (speed boost!) 2015-07-02 18:57:40 +02:00
Alessandro Ranellucci
b025efe729 Ported GCode::travel_to() to XS 2015-07-02 15:12:04 +02:00
Alessandro Ranellucci
a6f4c8e567 Ported GCode::set_extruder() and OozePrevention 2015-07-02 15:02:20 +02:00
Alessandro Ranellucci
b14290b9f6 Make tests happy 2015-07-02 14:29:20 +02:00
Alessandro Ranellucci
5571144c0e Ported Slic3r::GCode::needs_retraction() to XS 2015-07-01 23:14:40 +02:00
Alessandro Ranellucci
b4019bb438 Ported more Slic3r::GCode methods to XS 2015-07-01 23:00:52 +02:00
Alessandro Ranellucci
801f629fdc Ported Slic3r::GCode storage to XS 2015-07-01 21:47:17 +02:00
Alessandro Ranellucci
280f3f38d7 Ported Slic3r::GCode::OozePrevention storage to XS 2015-07-01 21:01:42 +02:00
Alessandro Ranellucci
b43dd92766 Ported Slic3r::GCode::Wipe storage to XS 2015-07-01 20:57:16 +02:00
Alessandro Ranellucci
bf9cd1b8e6 Ported Slic3r::GCode::AvoidCrossingPerimeters to XS 2015-07-01 20:14:05 +02:00
Alessandro Ranellucci
580d28d071 Finished porting PlaceholderParser to XS 2015-07-01 19:35:22 +02:00
Alessandro Ranellucci
249088b4f8 Ported Config::setenv() to XS 2015-07-01 18:18:25 +02:00
Alessandro Ranellucci
f361d8ad43 Ported PlaceholderParser::apply_env_variables() to XS 2015-07-01 17:56:38 +02:00
Alessandro Ranellucci
7f70da97b4 New experimental autospeed feature. #2810 2015-05-31 22:04:32 +02:00
Alessandro Ranellucci
13b7316807 Merge branch 'master' into sender 
Conflicts:
	Build.PL
	lib/Slic3r/GUI/MainFrame.pm
 2015-05-28 18:05:36 +02:00
Alessandro Ranellucci
7d81aee62f Added the [scale] placeholder. #2791 2015-05-02 21:59:15 +02:00
Alessandro Ranellucci
d6d7880507 Ported Slic3r::Geometry::arrange() to C++/XS 2015-04-29 19:19:07 +02:00
Alessandro Ranellucci
5eb3bc52ef Ported ModelObject::rotate() and ModelObject::flip() to XS, as well as axes constants 2015-04-16 21:22:04 +02:00
Alessandro Ranellucci
be2f46ca68 Ported Layer::merge_slices() to XS 2015-04-16 20:44:55 +02:00
Alessandro Ranellucci
1f8ef2a63c Fixed regression introduced by the recent PerimeterGenerator refactoring causing spiral vase not to be correctly skipped on multi-loop layers. Includes regression test. #2761 2015-04-12 20:16:27 +02:00
Alessandro Ranellucci
8654537e55 Use support material layer height for raft layer instead of object layer height. #2723 2015-03-09 19:36:23 +01:00
Alessandro Ranellucci
d8ee9dd5f5 Limit first object layer height correctly when using a larger support material extruder. #2722 2015-03-09 19:27:57 +01:00
Alessandro Ranellucci
6cab5668e3 Restore correct ordering of concentric infill loops, preventing them from being reordered during G-code generation 2015-03-09 18:28:07 +01:00
Alessandro Ranellucci
d2172b4383 Merge branch 'master' into sender 2015-03-06 22:15:43 +01:00
Alessandro Ranellucci
722e94513c Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled 2015-03-06 09:56:58 +01:00
Alessandro Ranellucci
ba6ae12635 Change end_program() to postamble() 2015-02-15 17:09:17 +01:00
Alexander Rössler
f2fa8cb63f added end_program() function to GCodeWriter 2015-02-07 12:36:29 +01:00
Alessandro Ranellucci
3ae6f2630e Merge branch 'master' into sender 
Conflicts:
	Build.PL
 2015-02-01 14:07:32 +01:00
Alessandro Ranellucci
bb3bf28e59 Ported prepare_fill_surfaces() to XS/C++ 2015-02-01 12:43:58 +01:00
Alessandro Ranellucci
8605969dc5 Don't output slic3r:z attribute in SVG for raft layers 2015-01-30 18:45:30 +01:00
Alessandro Ranellucci
e2b1b52679 Added a new Slic3r::Geometry::simplify_polygons() function 2015-01-30 18:33:20 +01:00
Alessandro Ranellucci
c264969962 Bugfix: crash when rendering lines with zero length in 3D preview. #2569 2015-01-25 15:21:45 +01:00
Alessandro Ranellucci
a5c0ffe963 Faster loading of 3D preview and much less memory used 2015-01-24 23:35:29 +01:00
Alessandro Ranellucci
8791f5a493 Cleanup of some method signatures and of XS return types 2015-01-19 18:53:04 +01:00
Alessandro Ranellucci
9f0283f808 Minor issue when dealing with files with empty layers at bottom. #2553 2015-01-18 12:35:05 +01:00
Alessandro Ranellucci
2bbb6c570b Ported toolpaths rendering to C++ 2015-01-18 01:07:22 +01:00
Alessandro Ranellucci
e749f6040f New +Line::intersection_infinite() method 2015-01-16 16:25:39 +01:00
Alessandro Ranellucci
e0a3d2577c Initial work for 3D rendering of toolpaths 2015-01-15 20:06:30 +01:00
Alessandro Ranellucci
18e815d032 More efficient 3D preview of slices 2015-01-15 18:49:07 +01:00