enricoturri1966
81f4df70dc
Fixed conflict after merge with master
2021-07-29 12:25:28 +02:00
enricoturri1966
701286615f
Follow-up of 1d4e7f5577 -> More robust fix
2021-07-29 12:14:51 +02:00
Lukáš Hejl
da3a0c6332
Fixed a crash in the multi-material segmentation when projected lines are outside of the BoundingBox used for EdgeGrid.
2021-07-29 11:45:02 +02:00
Lukáš Hejl
f577350f1f
Reworked bucket fill so that all neighboring triangles are computed based on information about triangle neighbors.
2021-07-29 11:45:02 +02:00
Lukáš Hejl
6d0e5d3b9c
Enabled to set "Maximum width of a segmented region" per object.
2021-07-29 11:45:02 +02:00
Lukáš Hejl
37f5f12f52
Replaced unnecessary double storing of edges in a graph for the multi-material segmentation by storing indices into a shared array of arcs.
2021-07-29 11:45:02 +02:00
Lukáš Hejl
216589fdb1
Get rid of unnecessary double storage of processed input polygons in the multi-material segmentation as ExPolygons and also as Polygons. All processed input polygons are now stored as ExPolygons.
2021-07-29 11:45:02 +02:00
Lukáš Hejl
38866b65b0
Get rid of unnecessary double calling of TriangleSelector::reset() in some cases when TriangleSelector::deserialize() is called.
2021-07-29 11:45:01 +02:00
Lukáš Hejl
2569da95d5
Parallelized the projection of painted regions in multi-material segmentation.
2021-07-29 11:45:01 +02:00
Lukáš Hejl
7a60f1793c
Fixed a possible overflowing of a painted area to an unpainted area in multi-material segmentation.
...
It was reworked graph generation for multi-material segmentation. Now only oriented arcs in one direction are added to the graph for input polygons. This direction matches the direction of the lines in the input polygons.
2021-07-29 11:45:01 +02:00
enricoturri1966
1d4e7f5577
Fix of scaling modifiers for a sinking object
2021-07-29 09:37:40 +02:00
enricoturri1966
97de723146
Tech ENABLE_SINKING_CONTOURS -> Fix for showing sinking contours while dragging objects
2021-07-29 09:03:20 +02:00
enricoturri1966
14a67b0c9e
Added sinking property item to objects list
2021-07-29 08:37:41 +02:00
enricoturri1966
1ea541767f
Fixed compile warning
2021-07-28 15:40:55 +02:00
enricoturri1966
d821fcba2d
Tech ENABLE_SINKING_CONTOURS -> Improved generation of sinking contours and color set to white
2021-07-28 14:27:57 +02:00
enricoturri1966
f1cd3e22c4
Tech ENABLE_SINKING_CONTOURS -> Cut gizmo: contours updated during render pass
2021-07-28 13:03:48 +02:00
Lukas Matena
a54f5fb41a
Render statistics now shows actual SwapBuffers() calls per second
2021-07-28 12:50:01 +02:00
enricoturri1966
0146013b4e
Tech ENABLE_SINKING_CONTOURS -> Sinking contours updated during render pass and shown also while dragging an object
2021-07-28 12:23:27 +02:00
enricoturri1966
d99ea7c20f
Tech ENABLE_SINKING_CONTOURS -> Sinking contours rendered using triangles
2021-07-28 11:21:59 +02:00
enricoturri1966
b24488ce51
Tech ENABLE_SINKING_CONTOURS -> Sinking contours shown while dragging Move/Rotate/Scale gizmos and show contours for gizmo cut
2021-07-27 13:02:06 +02:00
YuSanka
3449550a7c
MSW specific: Fixed strange layout after first switch between printer technology
2021-07-27 10:55:05 +02:00
enricoturri1966
502906178f
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_sinking_contours
2021-07-27 09:04:52 +02:00
enricoturri1966
90a23d73bc
Hopefully final follow-up of 8ebb2e2 -> GCodeViewer: Ensure that the view is properly updated after automatic selection of view type when loading model using multiextruders prints
2021-07-27 08:47:40 +02:00
Vojtech Bubnik
eb6392dccd
New slice_mesh() variant slicing with a single plane only, running
...
on a single thread only (not parallelized).
The new slice_mesh() is used to calculate contour of objects sunken
below the print bed.
2021-07-26 17:02:56 +02:00
YuSanka
84c6199015
Improvements for c5b7d4b2 fix
2021-07-26 16:17:21 +02:00
YuSanka
5f73724501
Search: Fixed a blinking for the first search
2021-07-26 15:06:18 +02:00
tamasmeszaros
0584b13167
Merge branch 'tm_flatpak_help_3'
2021-07-26 14:51:53 +02:00
tamasmeszaros
27b1174558
Increase minimum oversampling for grid conversion in hollowing
...
To avoid generation of broken meshes when the space for hollowing is tight
2021-07-26 14:51:22 +02:00
YuSanka
e79bcee739
Fixed update of the default menu after changing of the mode.
...
+ Added check for the output directory for the G-code extport.
2021-07-26 14:41:38 +02:00
enricoturri1966
4a9602b073
Another follow-up of 8ebb2e2a29 -> GCodeViewer: Ensure that the view is properly updated after automatic selection of view type introduced with 06e2835f83
2021-07-26 13:59:36 +02:00
tamasmeszaros
088e34740e
Fix messed up wx find procedure
2021-07-26 13:25:06 +02:00
tamasmeszaros
eca331ea35
Fix wx linkage to tiff and jpeg
2021-07-26 13:16:01 +02:00
tamasmeszaros
ca67d880ec
Fix issues with finding new deps on win
2021-07-26 13:07:20 +02:00
tamasmeszaros
7ed0d6b886
Fix broken hole drilling
2021-07-26 12:28:57 +02:00
YuSanka
a113f227f5
Use default last directory when we try to save a project with objects from Gallery
2021-07-26 11:34:52 +02:00
enricoturri1966
06e2835f83
Follow-up of 8ebb2e2a29 -> GCodeViewer: automatically select view type in dependence of gcode content for first loaded gcode file
2021-07-26 11:01:37 +02:00
YuSanka
9154ebb165
ConfigWizard: Draw logo inside OnPaint instead of use of wxStaticBitmap
2021-07-23 16:03:17 +02:00
enricoturri1966
c9dffd0c89
Preview legend: title of estimated print time section dependent on results
2021-07-23 14:49:24 +02:00
enricoturri1966
c732deeb91
Set imgui scrollbars' grab color to orange
2021-07-23 13:36:43 +02:00
enricoturri1966
8df2525355
Fixed conflicts after merge with master
2021-07-23 11:40:07 +02:00
Lukas Matena
d3b1b1f3d5
Fix of clipping plane for SLA supports,
...
probably broken since 1009f78
2021-07-23 11:32:36 +02:00
enricoturri1966
8ebb2e2a29
Fixed import of color print view from gcode files into GCodeViewer
2021-07-23 11:27:07 +02:00
Lukas Matena
e93c5d4f20
ImGui sliders clamping:
...
ImGuiWrapper::slider_float now clamps the value returned by imgui by default. Bare ImGui::SliderFloat
allows entering off-scale values when entered by keyboard, which is not nice. The protection can
be turned off by the last optional parameter.
2021-07-22 15:50:48 +02:00
Lukas Matena
1f89b3638c
FdmSupportsGizmo bugfix: reset highlighted slope after confirmation, otherwise
...
the highlight stays when it is confirmed and removed later
2021-07-22 14:12:06 +02:00
enricoturri1966
c9aa88db0d
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_sinking_contours
2021-07-22 13:00:47 +02:00
enricoturri1966
15b8e68c59
Tech ENABLE_SEAMS_VISUALIZATION set as default
2021-07-22 12:58:33 +02:00
enricoturri1966
59606a0ef6
Tech ENABLE_START_GCODE_VISUALIZATION set as default
2021-07-22 12:32:08 +02:00
enricoturri1966
d5ad47d0ca
Tech ENABLE_SCROLLABLE_LEGEND set as default
2021-07-22 12:18:38 +02:00
enricoturri1966
2dd7091cc3
Tech ENABLE_MODIFIED_DOWNSCALE_ON_LOAD_OBJECTS_TOO_BIG set as default
2021-07-22 11:55:08 +02:00
enricoturri1966
5c6810d0bc
Fixed conflicts after merge with master
2021-07-22 11:46:00 +02:00
enricoturri1966
65b3be92fe
Techs DISABLE_ALLOW_NEGATIVE_Z_FOR_SLA and ENABLE_ALLOW_NEGATIVE_Z set as default
2021-07-22 11:26:31 +02:00
Lukas Matena
5bffed394b
Fixed cursor size clamping in MMU segmentation gizmo
2021-07-22 11:03:09 +02:00
enricoturri1966
13c77990aa
Follow-up of 1f3252dd78 -> Fixed rectangle selection
2021-07-22 10:27:37 +02:00
enricoturri1966
81c78d0ecc
Tech ENABLE_EXTENDED_M73_LINES set as default
2021-07-22 09:55:39 +02:00
enricoturri1966
7817105abe
Tech ENABLE_GCODE_WINDOW set as default
2021-07-22 09:37:02 +02:00
enricoturri1966
5faac3c105
Tech ENABLE_VALIDATE_CUSTOM_GCODE set as default
2021-07-22 09:13:12 +02:00
enricoturri1966
b80fb40fcd
Tech ENABLE_GCODE_LINES_ID_IN_H_SLIDER set as default
2021-07-22 08:35:21 +02:00
YuSanka
232309a879
Don't save shapes directory to the "last_dir"
2021-07-21 16:13:40 +02:00
enricoturri1966
2d8f35561a
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_sinking_contours
2021-07-21 15:35:41 +02:00
enricoturri1966
22f04ca46e
Tech ENABLE_SINKING_CONTOURS -> 1st installment
2021-07-21 15:30:57 +02:00
YuSanka
c7051c9005
Removed unnecessary conditions that interfere with the search.
2021-07-21 14:48:05 +02:00
Lukas Matena
7acaf58c15
Fix of asserting ImGui:
...
ImGui does not want the io flags to change in between NewFrame and EndFrame.
We did that - e.g. after a key down-key up combination with no render in between,
or when key down and mouse move event were processed with no render in between.
An assert was added in imgui to detect this between 1.75 and 1.83, which
made the issue visible.
Solution: only call the new_frame function in update_key_data/update_mouse_data
when imgui actually consumes the input. This forces immediate render so
EndFrame will be called.
2021-07-21 14:14:16 +02:00
enricoturri1966
9264b79be7
Tech ENABLE_RELOAD_FROM_DISK_FOR_3MF set as default
2021-07-21 14:10:05 +02:00
Lukáš Hejl
4d2bee36e5
Fixed some compiler warnings.
2021-07-21 12:54:28 +02:00
enricoturri1966
be9114c6c8
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2021-07-21 12:28:14 +02:00
enricoturri1966
4b312ae170
ENABLE_ALLOW_NEGATIVE_Z -> Fixed build when the tech is disabled
2021-07-21 12:28:03 +02:00
YuSanka
c5b7d4b213
FixThroughNetFabb: Fixed strange behavior after fixing of the model (PrusaSlicer loosed a focus)
2021-07-21 12:11:25 +02:00
enricoturri1966
1f3252dd78
Revert of b140709fa8 and new implementation of fixing picking for sinking objects
2021-07-21 11:56:39 +02:00
enricoturri1966
7cd402dcd0
GCodeViewer -> Fixed crash when importing gcode files generated by older versions of PrusaSlicer
2021-07-21 08:58:14 +02:00
enricoturri1966
7c01ddf996
#6730 - GCodeViewer -> Fixed crash when importing gcode files generated by PrusaSlicer and edited by user or 3rd part post processors by appending new lines after the config section. Show instead the same error dialog as when trying to import the config into PrusaSlicer from the same gcode file
2021-07-21 08:36:16 +02:00
enricoturri1966
368cfedbc7
Keep non-sinking volumes on top of the printbed while scaling
2021-07-20 15:32:24 +02:00
YuSanka
097afc6598
Follow-up bf981ae049 : Small improvements
2021-07-20 15:22:52 +02:00
YuSanka
44f1dac8c7
GalleryDialog: Added process of the "Close" button
...
SavePresetDialog: To correct "darkmodding" the wxRadioBox was changed to the wxStaticBoxSizer with radio buttons
+ Some code cleaning
2021-07-20 14:46:38 +02:00
enricoturri1966
bda128c166
Small refactoring in Selection
2021-07-20 13:26:12 +02:00
enricoturri1966
fd5cf8d0cc
Refactoring in GLModel::render() to simplify client code
2021-07-20 12:36:56 +02:00
enricoturri1966
c61785f775
Tech ENABLE_SEQUENTIAL_LIMITS set as default
2021-07-20 12:05:15 +02:00
YuSanka
e6c361ec5e
Added "Modify Shapes Gallery" to the "Window" menu
...
+ Fixed a non-MSW build (added missed include)
2021-07-20 11:25:24 +02:00
enricoturri1966
b140709fa8
ENABLE_ALLOW_NEGATIVE_Z -> Fixed picking of sinking object
2021-07-20 11:02:04 +02:00
YuSanka
bf981ae049
Temporary workaround for compatibility with older Slicer:
...
To the "physical_printer" added "preset_name" option as a duplicate of the "preset_names" but like one string.
Note: It will works just for printer preset names without ";" (see #5503 )
2021-07-20 10:18:59 +02:00
YuSanka
cc92757cdc
Follow up 569200eb - fixed a typo witch was caused a bug "Impossible to revert the bed shape"
...
+ Added error message for exception when changing the config value
2021-07-20 09:41:29 +02:00
enricoturri1966
7d3e176a58
GCodeViewer -> Fixed loading of machine limits data from config contained into gcode files
2021-07-20 09:38:35 +02:00
YuSanka
888a5e3084
Fixed of the warnings.
...
+ Some small bug-fixing related to the system colors change on MacOS ("Set..." buttons didn't respect to the system color change)
2021-07-19 15:46:50 +02:00
YuSanka
d3ddb1cfa8
Fixed a bug with update of the warning icon for object after a deleting of the broken volume
2021-07-19 13:30:49 +02:00
YuSanka
4b5cf004bd
MSW specific: Fixed rescaling for the BitmapComboBox control and Notebook tab buttons
2021-07-19 12:36:14 +02:00
enricoturri1966
558336f325
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2021-07-19 11:37:32 +02:00
enricoturri1966
75a2d7620b
Removed striped shading for sinking objects
2021-07-19 11:37:18 +02:00
Lukáš Hejl
5405ab1986
Optimized seed fill and bucket fill selection to recompute selection only in case the cursor is pointing on a non-selected triangle.
2021-07-19 11:30:40 +02:00
Lukáš Hejl
5b67fafb75
Fixed a crash in the multi-material gizmo when bucket fill is selected.
2021-07-19 11:30:35 +02:00
enricoturri1966
ccf67793bd
Fixed typo introduced with 2848ae9c4d
2021-07-19 11:21:26 +02:00
enricoturri1966
2848ae9c4d
Colors in GLVolume defined as std::array<float, 4>
2021-07-19 11:11:49 +02:00
Justin Schuh
21abf8d88e
Fix bucket/seed fill tooltips ( #6720 )
2021-07-19 07:56:50 +02:00
enricoturri1966
bf7b554235
Disable reload from disk for built-in objects
2021-07-16 12:30:47 +02:00
Lukáš Hejl
b6b52fee73
Fixed an issue when the object in the multi-material gizmo had the wrong default color when the multi-material gizmo was first time opened after loading a painted 3MF file with different extruders colors than in the printer profile in Slicer.
2021-07-16 11:39:50 +02:00
enricoturri1966
beb60b5138
Follow-up of ef8ddacdfc -> Fixed rendering of modifiers after cleaning current selection
2021-07-16 10:56:29 +02:00
enricoturri1966
afa4776ead
Follow-up of 1a64abac96 -> Keep modifiers original size and do not reposition them when using load command
2021-07-16 10:03:35 +02:00
Lukáš Hejl
51b94f4747
Added the bucket fill tool into the multi-material gizmo. Also, the multi-material gizmo was reworked to show only options applicable for a chosen painting tool.
2021-07-16 09:19:40 +02:00
YuSanka
977ffe556d
ConfigWizard: Fixed a bug in update of the selected presets
...
(probably related to #6436 - Cannot add SLA materials)
2021-07-15 14:54:22 +02:00
Lukas Matena
433ae80d9c
Updated our list of changes in imgui
2021-07-15 14:45:10 +02:00
Lukas Matena
b71d787f69
ImGui keyboard input fields are now locale-sensitive
2021-07-15 13:38:57 +02:00
Lukas Matena
b8c949ea71
Added a new source file from the new imgui
2021-07-15 13:28:01 +02:00
