Robert Pelnar
9dba7dcd1f
DISABLE_M42_M226 = +56 bytes RAM (because of stack overflow)
...
build 127
2017-12-09 19:31:27 +01:00
Robert Pelnar
995801c967
Silent mode limits
...
+ cannot compile "END_FILE_SECTION"
2017-12-09 14:41:50 +01:00
Robert Pelnar
82f5a79527
bug fix (cannot compile) - ultralcd.cpp - conversion from (const char*)
2017-12-08 19:22:02 +01:00
PavelSindler
00945cf7c3
version changed
2017-12-08 16:59:45 +01:00
PavelSindler
868aacc7d5
turn on second serial line from settings menu
2017-12-08 16:56:06 +01:00
PavelSindler
07aa7a3803
support two serial lines at the same time
2017-12-07 19:14:17 +01:00
PavelSindler
d0b6b19373
save filename to eeprom first, then check if file is complete
2017-12-07 17:16:23 +01:00
PavelSindler
b5ad41b8af
build number
2017-12-06 18:28:08 +01:00
PavelSindler
2cbd1f7894
fix: added saving filename to eeprom which was removed by accident
2017-12-06 18:13:54 +01:00
PavelSindler
071873b38a
init; last merged file: Marlin_main.cpp
2017-12-06 17:48:16 +01:00
PavelSindler
40b7a5c82f
build number changed
2017-12-06 14:59:26 +01:00
PavelSindler
44218a1b53
incomplete file check ported from MK2: initial version
2017-12-06 14:55:53 +01:00
XPila
443dc53145
Merge pull request #292 from XPila/MK3
...
Automatic filament load in M600
2017-12-05 18:38:23 +01:00
Robert Pelnar
58f8fdb51b
Automatic filament load in M600
2017-12-05 18:37:03 +01:00
PavelSindler
bc0278c6e1
build number changed
2017-12-05 17:13:07 +01:00
PavelSindler
d7db407f32
xyz cal.: add delay_keep_alive messages to reset watchdog (LS optimization method takes more than 4s in some cases)
2017-12-05 13:16:59 +01:00
PavelSindler
22065e4877
merging from dev/MK3
2017-12-02 21:56:39 +01:00
PavelSindler
707e9cb396
chages in power panic absolute mode
2017-12-01 14:26:08 +01:00
PavelSindler
06f7439dc1
changed version
2017-11-29 14:11:31 +01:00
PavelSindler
74441ce3a1
power panic in absolute mode fixed, but some e steps are probably missing
2017-11-29 14:05:47 +01:00
Robert Pelnar
0de584c213
bugfix UVLO - extruder position from stepper
2017-11-29 02:08:15 +01:00
Robert Pelnar
a56b0ccaf8
bugfix - Filament sensor enable from menu
2017-11-29 00:15:45 +01:00
Robert Pelnar
9413eca52c
UVLO recover E absolute mode
...
build number 119
2017-11-28 23:41:58 +01:00
Robert Pelnar
13f1684a4c
build 118
2017-11-28 22:53:51 +01:00
XPila
1da1eaea01
Merge pull request #117 from PavelSindler/m600
...
M600: wait for user before unloading filament
2017-11-28 22:45:57 +01:00
Robert Pelnar
1863819e39
pat9125 reinit when fsensor enabled from menu.
2017-11-28 22:44:58 +01:00
PavelSindler
020a7ec257
unload filament can be repeated
2017-11-28 19:04:43 +01:00
PavelSindler
059c255a35
changed build version to b117
2017-11-28 18:31:38 +01:00
PavelSindler
c0112f05e1
M600: wait for user before unloading filament
2017-11-28 18:28:53 +01:00
PavelSindler
2cf7f54e5f
changed build
2017-11-27 20:29:47 +01:00
PavelSindler
3f7be78997
translation to Czech language added
2017-11-27 18:54:44 +01:00
PavelSindler
bd748bc986
EINY -> EINSY
2017-11-27 18:47:48 +01:00
PavelSindler
211725c946
dont show temp cal message, dont save uvlo flag to eeprom if printing from USB
2017-11-27 18:30:16 +01:00
PavelSindler
ddc8587bbd
Merge pull request #112 from PavelSindler/menu_corrections
...
Menu corrections, translation to Czech language
2017-11-27 18:00:31 +01:00
PavelSindler
ce3f14e1c0
tune menu updated
2017-11-27 17:55:32 +01:00
PavelSindler
67a2e0a706
settings menu updated
2017-11-27 17:01:01 +01:00
PavelSindler
f075711e64
corrected menus
2017-11-27 16:37:46 +01:00
PavelSindler
7c6d63ffb5
pla preheat temp. changed, temp calibration on/off moved to settings menu
2017-11-27 16:21:54 +01:00
PavelSindler
044ed951cb
translations to czech language and menu corrections: initial version
2017-11-27 16:06:34 +01:00
Robert Pelnar
7c8de94778
filament unload - initial
...
lower currents for power panic
2017-11-27 15:54:36 +01:00
Robert Pelnar
533418d63e
opravene nezadouci resetovani watchdogem
...
powerpanic Z shift = 0.64mm (misto 1.92mm)
teplotni kompenzace default = ON
2017-11-27 14:43:56 +01:00
Robert Pelnar
25c16cc835
Extrudser info, merge upstream (powerpanic fix)
...
build number = 114
2017-11-27 07:44:12 +01:00
XPila
60930beb52
Merge pull request #108 from PavelSindler/power_panic
...
Power panic works with folders
2017-11-27 07:27:17 +01:00
Robert Pelnar
1113124bde
PINDA calibration and precalibrated characteristics.
2017-11-27 07:09:53 +01:00
PavelSindler
d9f44eb16b
unused code commented
2017-11-27 06:36:41 +01:00
PavelSindler
bd59e11660
removed serial print
2017-11-27 06:22:32 +01:00
PavelSindler
42b533b5d8
first working version
2017-11-27 06:20:51 +01:00
XPila
3b892e16d8
Merge branch 'MK3' into MK3
2017-11-27 04:49:23 +01:00
Robert Pelnar
4dae6f871e
Sg load meassurement durring self test - 'Belt status'
2017-11-27 04:46:58 +01:00
PavelSindler
a40c759ee7
First run: show calibration status messages in case that user refused to use wizard
2017-11-27 02:03:42 +01:00
PavelSindler
5a77113fb5
init
2017-11-27 01:59:47 +01:00
PavelSindler
24195557ea
removed redundant line
2017-11-27 01:24:58 +01:00
PavelSindler
a7b40d43e3
timeouting to status in the end of first layer cal.
2017-11-27 01:23:11 +01:00
PavelSindler
7de187d813
if user dont confirm live adjust Z by pressing the knob, save last live adjust value to eeprom
2017-11-27 00:17:45 +01:00
PavelSindler
4c7cc5520e
"confirm nozzle clean" message re-added
2017-11-26 21:26:36 +01:00
PavelSindler
856d8c1be9
Merge pull request #103 from PavelSindler/print_menu_fix
...
Print menu fix
2017-11-26 20:58:32 +01:00
PavelSindler
a61964666e
whitespace and minor corrections
2017-11-26 20:57:28 +01:00
PavelSindler
626818f87d
removed debug messages
2017-11-26 20:53:09 +01:00
PavelSindler
d8bf148996
manage heater added
2017-11-26 20:51:56 +01:00
PavelSindler
4297a98fdd
debuging messages
2017-11-26 19:10:38 +01:00
XPila
efba30b77e
Merge pull request #102 from XPila/MK3
...
Fixed bug - unload filament restarts the printer.
2017-11-26 17:20:40 +01:00
Robert Pelnar
e5fee387db
Fixed bug - unload filament restarts the printer.
2017-11-26 17:14:39 +01:00
PavelSindler
e605305db4
build number changed
2017-11-24 23:01:53 +01:00
PavelSindler
38c1ea7867
Merge pull request #101 from PavelSindler/wizard
...
Wizard and mesh bed leveling messages
2017-11-24 22:58:16 +01:00
PavelSindler
05348a33db
wizard: dont update lcd when loading filament
2017-11-24 22:55:47 +01:00
XPila
25b0b0b381
Merge pull request #100 from XPila/MK3
...
Fsensor synchronization and triggering improved
2017-11-24 22:03:55 +01:00
Robert Pelnar
f2e9bdef24
Fsensor synchronization and triggering improved
...
Watchdog implemented (4s interval, triggered from manage_heater)
Stallguard sensitivity for XY decreased by 1
Extruder current adjusted to 5.5kg force
Build number = 111
2017-11-24 21:53:35 +01:00
PavelSindler
171dc707fa
improve mesh bed leveling messages
2017-11-24 20:18:11 +01:00
PavelSindler
4b644a58ae
block of gcodes changed to avoid full buffer during v2 cal.
2017-11-23 18:22:00 +01:00
PavelSindler
79c221d6c0
Merge pull request #97 from PavelSindler/wizard
...
show live adjust Z option in main menu during First layer cal.
2017-11-23 15:59:03 +01:00
PavelSindler
2170c1bbe7
timeout to status prolonged, no timeout allowed when MSG_WIZARD_RERUN
2017-11-23 15:46:10 +01:00
PavelSindler
ba1bb4aea3
whitespace
2017-11-22 19:18:32 +01:00
PavelSindler
6d0574dd0f
changed Y_MIN and probe points coordinates
2017-11-22 19:13:34 +01:00
PavelSindler
6bd221ad3b
Y distance between nozzle and PINDA corrected
2017-11-22 16:07:03 +01:00
PavelSindler
7d825de214
show live adjust Z option in main menu when running First layer calibration
2017-11-22 11:18:39 +01:00
Robert Pelnar
213ee43cc9
Merge usptream
...
Crashdetection fixed
pl language removed (because of low flash capacity)
build number = 110
2017-11-22 08:41:52 +01:00
XPila
ee9936fa6c
Merge pull request #95 from PavelSindler/selftest_fix
...
selftest for axis modified to overcome collision between cables and PSU cover
2017-11-22 02:58:46 +01:00
XPila
ed379275a5
Merge pull request #94 from PavelSindler/PID_cal_update
...
PID calibration temp runaway
2017-11-22 02:58:25 +01:00
XPila
e5e2988247
Merge pull request #92 from PavelSindler/initial_message
...
Initial message changed
2017-11-22 02:45:27 +01:00
XPila
551db1ce6b
Merge pull request #90 from PavelSindler/sd_card_menu
...
Improved SD card menu
2017-11-22 02:45:11 +01:00
PavelSindler
e661020ada
selftest for x_axis modified little bit to overcome problems with cables and PSU cover colision
2017-11-21 18:46:13 +01:00
PavelSindler
1ca48fee49
PID calibration temp runaway
2017-11-21 15:11:15 +01:00
PavelSindler
bbffd2f31b
basic language corrections
2017-11-21 14:44:07 +01:00
PavelSindler
ae6a0b4d29
Initial message changed. Needs to be updated in bootlader.
2017-11-21 14:16:55 +01:00
Robert Pelnar
b8525f8043
Print class printf function (experimental, disabled by default)
...
LiquidCrystal VT100 escape codes (EraseScreen, CursorHome, ...)
Stream support for lcd and uart, fprintf and printf (stdout=uartout)
Dcodes enabled, code reduced, printf used
Splash screen with esc codes
2017-11-20 20:09:54 +01:00
PavelSindler
77eb26353c
Improved SD card menu
2017-11-20 17:20:56 +01:00
Robert Pelnar
aee62750e7
Build 109
2017-11-16 22:03:36 +01:00
XPila
afb85865b6
Merge branch 'MK3' into wizard
2017-11-16 20:54:07 +01:00
XPila
279ea79bf6
Merge pull request #86 from PavelSindler/keepalive_messages
...
host keep alive messages
2017-11-16 20:53:09 +01:00
XPila
2a85de48ea
Merge pull request #88 from XPila/MK3
...
Mk3
2017-11-16 20:52:46 +01:00
Robert Pelnar
ef3e06da30
...
2017-11-16 20:52:13 +01:00
Robert Pelnar
ee2f927148
Build Number = 108
...
FSensor log can be enabled with D9125L1
Selftest menu
PINDA D codes
2017-11-16 20:51:50 +01:00
PavelSindler
5e4236dd2e
selftest for axis improved (better code readibility) and no crash triggered
2017-11-16 18:02:11 +01:00
PavelSindler
2199c84ec9
wrapper function for selftest
2017-11-15 16:40:35 +01:00
PavelSindler
16a7adfe33
merging with upstream
2017-11-15 15:45:26 +01:00
PavelSindler
91d125369e
keepalive messages initial version
2017-11-15 15:09:29 +01:00
PavelSindler
19d89b37b5
Merge pull request #83 from PavelSindler/lin_adv_fix
...
Lin adv. fix from MK2 fw
2017-11-15 11:53:39 +01:00
PavelSindler
457e4f61b9
Merge pull request #84 from PavelSindler/support_menu_fix
...
Support menu translated and fixes, snmm M600 long beep fix
2017-11-15 11:53:15 +01:00
PavelSindler
4630df6cf4
pause print fix for absolute mode, minor first layer cal. fix for snmm
2017-11-14 16:51:34 +01:00
PavelSindler
f209f698ac
translations, cursor position changes
2017-11-14 16:16:02 +01:00
PavelSindler
9e2533ecdf
Support menu translated and fixes, snmm M600 long beep fix
2017-11-14 16:10:10 +01:00
PavelSindler
4d9780a3c6
Merged lin adv. fix from MK2
2017-11-14 13:57:32 +01:00
XPila
dfe3541d2b
Merge branch 'MK3' into MK3
2017-11-13 18:48:19 +01:00
Robert Pelnar
01de834e0d
SG_THR_X = 2, holding currents == running currents
...
Farm preheat menu
dcode D5 - read/write/erase FLASH
dcode D6 - bootloader update test (for new stk500-prusa)
_NO_ASM - MINGW simulator support
fixed bug - "Fil. sensor [on/off]" menu
Build number = 107
2017-11-13 18:45:11 +01:00
PavelSindler
ee5505887c
First layer cal. corrections, translations to all languages for Wizard MK2 added
2017-11-13 17:43:14 +01:00
PavelSindler
eda0c6bd39
english version of xyz: place/remove steel sheet; wait for cooling down removed,
2017-11-13 17:09:26 +01:00
PavelSindler
5707f8b14e
Merge remote-tracking branch 'upstream/MK3' into wizard
2017-11-13 14:39:14 +01:00
PavelSindler
fbbcc27f1a
X max lowered to 250, XYZ/Z calibration: Z top coordinate changed, changes in xyz cal. because of stell sheet, still not final version
2017-11-12 11:30:06 +01:00
PavelSindler
a81d28664f
axis selftest fixed
2017-11-08 14:25:31 +01:00
michalprusa
1e81861e0c
Configuration files reordered and added build number
2017-11-07 23:54:06 +01:00
XPila
55325a5a32
Merge branch 'MK3' into MK3
2017-11-07 17:15:27 +01:00
PavelSindler
e88ac72cc8
missing messages added
2017-11-07 16:57:52 +01:00
PavelSindler
2e68770e62
initial version - messages missing (will not compile)
2017-11-07 16:49:04 +01:00
PavelSindler
67c76104a5
Configuration_prusa updated
2017-11-07 11:39:11 +01:00
PavelSindler
c36b7be90c
SUPPORT_VERBOSITY initial version
2017-11-07 11:36:41 +01:00
PavelSindler
461675b806
Merge pull request #78 from PavelSindler/4point_xyz_cal
...
4point xyz cal.
2017-11-07 10:02:32 +01:00
michalprusa
967594edf0
Added G-CODE "PRUSA FAN" to report RPM of both fans
2017-11-03 20:27:52 +01:00
Robert Pelnar
877c8a3978
TMC2130 configuration in eeprom (not finished).
...
Extruder and Z holding currents same as running currents.
M600 filament unload speed = 3500 (PFW-22).
FSensor - algorithm changed (reset error couter instead of decrement)
build number = 106
2017-10-30 15:45:29 +01:00
PavelSindler
1ee6016fa0
Merge remote-tracking branch 'upstream/MK3' into 4point_xyz_cal
2017-10-30 11:48:45 +01:00
Robert Pelnar
bd7c3d08f3
Marlin_main - lineending CRLF -> LF
2017-10-27 17:07:02 +02:00
Robert Pelnar
0607086e14
Build number = 105
2017-10-27 16:38:12 +02:00
PavelSindler
c4d7b801b9
Initial version. XYZ cal works, but bed ref. points coordinates must be checked.
2017-10-27 16:12:37 +02:00
PavelSindler
d37c925bc0
Merge branch 'MK3' into print_fan_speed
2017-10-26 18:04:38 +02:00
PavelSindler
f4d5d891df
measuring pulse width: initial version
2017-10-26 17:42:27 +02:00
Robert Pelnar
45d6baa757
setup second serial port only in case it is selected
...
build number = 104
2017-10-24 23:20:48 +02:00
Robert Pelnar
cddb0eafb8
PAT9125 - sampled only Y value, new debug code D9125.
...
FSensor - synchronous sampling and new algorithm
build number = 103
2017-10-24 19:45:15 +02:00
Robert Pelnar
8734961e0e
M114 now reports also actual extruder position,
...
PAT9125 HWI2C (Wire) support,
fsensor implementation into separate file
build number = 102
2017-10-22 22:42:45 +02:00
michalprusa
1244b195f9
M119 now reports real values of hardware endstops, not SG status.
2017-10-18 18:04:42 +02:00
michalprusa
84bdc6c0e6
Merge remote-tracking branch 'origin/MK3' into MK3
2017-10-18 15:36:31 +02:00
Robert Pelnar
66c19b874d
Extruder settings tunning ( http://jira.prusa/projects/PFW/issues/PFW-5 )
...
buildnumber increased to 101
2017-10-17 21:24:11 +02:00
Robert Pelnar
6a0f8752c3
Endless loop after calibration Z ( http://jira.prusa/projects/PFW/issues/PFW-3?filter=allissues )
...
Buildnumber (http://jira.prusa/projects/PFW/issues/PFW-4?filter=allissues )
2017-10-17 21:05:31 +02:00
Robert Pelnar
cc9f03a46f
Line endings to LF (./le.sh lf)
2017-10-03 13:01:59 +02:00
michalprusa
7cf0218737
Merge remote-tracking branch 'origin/MK3' into MK3
2017-09-27 21:34:37 +01:00
Robert Pelnar
cc469b4c51
changed configuration
2017-09-26 17:20:44 +02:00
michalprusa
0b88142253
Merge remote-tracking branch 'origin/MK3' into MK3
2017-09-26 14:48:32 +01:00
michalprusa
77debbc568
Fail stats moved to main menu to be easily accessible
2017-09-26 14:46:33 +01:00
michalprusa
c3585bc696
Automatic recovery typo fix
...
Failures statistics in eeprom
2017-09-26 14:14:17 +01:00
Robert Pelnar
ca33f7f60f
PWM_GRAD back to 4 (trinamic suggested value), standstilltimeout = 1000
2017-09-26 13:07:25 +02:00
michalprusa
5ff28682be
Automatic recovery after crash is detected
2017-09-26 11:48:46 +01:00
michalprusa
a4a90aa9ed
Merge remote-tracking branch 'origin/MK3' into MK3
2017-09-26 11:37:39 +01:00
Robert Pelnar
40fae26d75
Silent / Hight Power mode switching - wait for standstill
...
parameter tunning:
PWM_GRAD, PWM_AMPL TCOOLTHRS (XY)
2017-09-26 12:22:58 +02:00
michalprusa
22f189009f
Merge remote-tracking branch 'origin/MK3' into MK3
2017-09-26 10:03:12 +01:00
Robert Pelnar
345fee66be
Silent mode x-axis amplitude adjust from 200 to 210, because of layershift at high speed.
2017-09-26 07:20:54 +02:00
Robert Pelnar
b475d11bdb
Maker Faire brainstorm 2.0 (2)
...
Automatic recover after short power loss (according to heatbed temperature drop)
Adjusted crashdetection - TMC2130_TCOOLTHRS_X and TMC2130_TCOOLTHRS_Y = 450 to be enabled at low speed
!!!ALL FEATURES TESTED AT THIS POINT!!!
2017-09-26 06:11:42 +02:00
Robert Pelnar
89121e6e34
Maker Faire brainstorm 2.0
...
Added filament sensor and crash detection to EEPROM
Added crash-detection counters display disable directive
Added Restore/Save print directive
Added crash detection and filament sensor settings to Tune menu
2017-09-26 04:30:10 +02:00
Robert Pelnar
a883c8df84
preklep
2017-09-26 03:23:08 +02:00
Robert Pelnar
73cc1c9c8a
initial state of crash detect and filament sensor is ON
...
slowed down return speed from crash detect after home
Added babystep apply after return from crash detect (don’t know if it’s accurate)
Added D10 to set machine to XYZ correctly calibrated
Added resume debug directive to mask additional menu item
2017-09-26 03:21:33 +02:00
michalprusa
14a8c33096
Merge remote-tracking branch 'origin/MK3' into MK3
2017-09-26 00:51:12 +01:00
Robert Pelnar
39f6e746dc
Crashdetection tunning.
2017-09-26 01:43:56 +02:00
bubnikv
ed0fe01bcc
Decreased the homing feedrate for the X axis from 3000 to 2500mm/min.
...
With the old settings the stall guard did not work reliably.
2017-09-25 15:22:20 +02:00
bubnikv
c6e9896257
Changed the homing routine to avoid crashing into the right end stop.
2017-09-25 15:20:39 +02:00
bubnikv
b0ca2477c8
Modified homing procedures for the X & Y axes using the Trinamic stall guard
...
to run against the end stop with a repeatable velocity.
Slightly reduced the collision detection sensitivity.
2017-09-24 00:07:32 +02:00
bubnikv
b58dcf33d0
Removed a test snippet, which broke the power panic recovery.
2017-09-23 20:52:22 +02:00
Robert Pelnar
f2f74ebddf
Powerpanic Z correction improved.
2017-09-23 20:36:10 +02:00
michalprusa
39e32c8b3a
Sync of Configuration_prusa to proper variant
2017-09-23 14:28:40 -04:00
XPila
4fa5669298
Merge pull request #57 from XPila/MK3
...
Soft homing + fixed homing in silent mode.
2017-09-23 20:02:15 +02:00
Robert Pelnar
e11ae8bdbf
Soft homing + fixed homing in silent mode.
2017-09-23 20:01:37 +02:00
XPila
e44adfc71b
Merge pull request #56 from XPila/MK3
...
Fixed homing (mbl and babystep - crashdetection recovery work fine now).
2017-09-23 16:35:26 +02:00
Robert Pelnar
480838a0a1
Fixed homing (mbl and babystep - crashdetection recovery work fine now).
2017-09-23 16:35:01 +02:00
XPila
5649e7be9d
Merge pull request #55 from XPila/MK3
...
Silent/High Power mode switching with crashdetection.
2017-09-23 15:09:01 +02:00
Robert Pelnar
89acf29247
Silent/High Power mode switching with crashdetection.
2017-09-23 15:01:31 +02:00
XPila
e676ce6230
Merge pull request #53 from XPila/MK3
...
Crashdetection
2017-09-22 23:08:08 +02:00
Robert Pelnar
d2ff47dac8
Crashdetection
2017-09-22 23:06:52 +02:00
PavelSindler
03b7a8e765
Merge pull request #52 from PavelSindler/MK3
...
fan error during print improved
2017-09-22 21:22:17 +02:00
PavelSindler
a95506b128
fan speed error during print fixed
2017-09-22 21:21:16 +02:00
XPila
1ca48ef160
Merge pull request #51 from XPila/MK3
...
SG limits adjusted (x=5,y=5), for homing is possible to set different…
2017-09-22 20:53:26 +02:00
Robert Pelnar
4805713b8d
SG limits adjusted (x=5,y=5), for homing is possible to set different values (x=5,y=5, without filter).
2017-09-22 20:53:00 +02:00
PavelSindler
d1a065881b
fan error: long pause is used during print, resuming print resets error flag; stop print used during heating phase
2017-09-22 20:43:30 +02:00
PavelSindler
7e71d21a03
Merge pull request #50 from PavelSindler/MK3
...
Fan errors updated
2017-09-22 19:48:27 +02:00
PavelSindler
045ffb9f0e
languages updated
2017-09-22 19:47:08 +02:00
PavelSindler
13f45adb13
fan error changes
2017-09-22 19:31:52 +02:00
Robert Pelnar
df1aa85526
Crashdetection + configuration file.
2017-09-22 19:28:32 +02:00
PavelSindler
b87dc69042
merging with upstream
2017-09-22 18:26:13 +02:00
PavelSindler
a53428835a
fan error improvements
2017-09-22 18:22:21 +02:00
XPila
10cd30b9c6
Merge pull request #48 from XPila/MK3
...
Language files (EN only), because of flash overflow.
2017-09-22 17:43:37 +02:00
Robert Pelnar
f5e39112a2
Language files (EN only), because of flash overflow.
2017-09-22 17:42:53 +02:00
bubnikv
522b438ef5
Power panic: When panicking, move the X carriage to the bed side fast.
2017-09-22 16:44:00 +02:00
bubnikv
a8297369b2
Merge branch 'MK3' of https://github.com/prusa3d/Prusa-Firmware-DEV into MK3
2017-09-22 15:43:56 +02:00
bubnikv
23b4fa6c0d
Some fixes / improvements of the power panic:
...
1) Fix of an order of SD card function calls on recover: First set position, then restart the print.
2) Some convenience improvements: On panic, the X axis moves to the edge to avoid oozing into the print.
3) On recovery, move Z up if the head is too low to make it easier for the user to clean the print head.
2017-09-22 15:43:39 +02:00
PavelSindler
37d7740e42
Merge pull request #47 from PavelSindler/MK3
...
fan check turn off, saving to eeprom with offset and levels, fan kickstart,2nd heatbed version, fans check modified
2017-09-22 14:39:52 +02:00
bubnikv
72ab17f585
Further fixes of the power panic and g-code & planner queues.
2017-09-22 13:44:10 +02:00
bubnikv
582a6270b0
Fix of a power panic print stop.
2017-09-21 17:50:39 +02:00
PavelSindler
effe6126be
eeprom error message
2017-09-21 15:35:46 +02:00
PavelSindler
6eb57da770
fan check can be turned off from support menu, saving parameters to eeprom with offset and different levels, fan kickstart,2nd heatbed version, fans check modified
2017-09-21 15:20:02 +02:00
Robert Pelnar
1409bd633c
Power Panic - new method of sd_position calculation.
2017-09-21 05:35:41 +02:00
Robert Pelnar
9b901bd3f5
XY homing repeatibility - move by 160um from margin.
2017-09-21 04:55:30 +02:00
Robert Pelnar
4cae00741e
MAKER FAIRE
...
filament sensor: runout detection tuning, save/restore print
silent mode: safe mode selection durring printing and after homing
2017-09-21 01:52:28 +02:00
Robert Pelnar
e34d816004
Recover print
2017-09-20 16:04:02 +02:00
Robert Pelnar
2c3387e71d
Recover print - simple solution
2017-09-19 21:38:47 +02:00
Robert Pelnar
9d91a5d425
TMC2130 XY currents can be over 31 (like Z).
2017-09-19 17:42:43 +02:00
Robert Pelnar
c4e9e624f5
cmd queue and planner - functions for calculating sd position:
...
cmdqueue_calc_sd_length
planner_calc_sd_length
2017-09-18 19:36:18 +02:00
Robert Pelnar
9c92025cf2
Serial port ECHO bug fix - for clear eerpom farm_mode will be set to false. In farm_mode is second serial port the main port and data received from this port is send to serial port 0 (debuging feature).
2017-09-15 16:34:34 +02:00
Robert Pelnar
6f5f88e7ea
Temporary added configuration file Configuration_prusa.h.
2017-09-14 16:28:16 +02:00
Robert Pelnar
9105de073c
Cmdqueue code in separate files, debug codes for read/write eeprom and ram, PWM amplitude for Y axis stealtchop mode increased to 210.
2017-09-14 16:19:49 +02:00
Robert Pelnar
14519aa7ee
Support the second serial (original commit 7d2d6c6fdc on MK2 by AndreeeCZ)
2017-09-13 13:35:22 +02:00
Robert Pelnar
0685439e36
Cmd queue modification. Added CMDHDRSIZE=2, each command readed from SD is preceded by one byte variable containing original length.
2017-09-12 19:20:41 +02:00
Robert Pelnar
0122146dd8
Fixed configuration files (missing TEMP_SENSOR_PINDA and TEMP_SENSOR_AMBIENT)
2017-09-12 12:35:58 +02:00
Robert Pelnar
9c324bfeda
Stealth chop mode creek fix - TCOOLTHRS must be set to zero, Y-axis current increased.
2017-09-08 21:58:39 +02:00
Robert Pelnar
d9cdb1da60
Ambient thermistor - table and conversion function, extruder motor changed back to 200steps type, extruder resolution changed to 32usteps.
2017-09-06 16:04:50 +02:00
Robert Pelnar
8ec316773f
PINDA thermistor and ambient thermistor.
2017-09-05 14:02:35 +02:00
Robert Pelnar
f563618b1c
PINDA thermistor + extruder current adjust.
2017-08-30 21:56:48 +02:00
Robert Pelnar
1e705198e0
LCD backlight brightnes pwm control and lcd blinking.
2017-08-21 17:23:30 +02:00
Robert Pelnar
d63045fdb3
TMC2130 stallguard improovment - axis load monitoring, autocalibrate Z.
2017-08-21 13:06:17 +02:00
Robert Pelnar
683784c4c7
PAT9125 I2C, hardware SG homing
...
separate pin configuration file for each board
changed board codes:
RAMBO =100, MiniRambo1.0 =200, MiniRambo1.3 = 203, Einy03 =303, Einy04 =304
2017-08-17 15:23:34 +02:00
Robert Pelnar
a7477673de
HW SG homing, SWSPI pins for EINY03/04
2017-07-18 13:54:01 +02:00
Robert Pelnar
fa854bde13
fixed bug - removed variable sg_homing_delay
2017-07-12 18:17:39 +02:00
XPila
a41a836ef0
Merge branch 'MK3' into MK3
2017-07-12 17:54:41 +02:00
Robert Pelnar
cd48d5b4ff
TMC2130 stallguard SW homing improvement - steps delta instead of delay (loop count), new function tmc2130_home_restart, always enable endstops durring homing.
2017-07-12 17:36:50 +02:00
michalprusa
c36e088f99
Merge remote-tracking branch 'origin/MK3' into MK3-michal
2017-07-07 10:46:31 +02:00
michalprusa
281ae26a5e
Merge branch 'MK3' into MK3-michal
2017-07-07 10:43:39 +02:00
michalprusa
e6c7a29693
filament sensor tweaked for 400 step motor.
...
On/OFF switch for filament sensor
2017-07-07 10:42:36 +02:00
PavelSindler
46f0c3e3b9
selftest fixed
2017-07-07 10:09:09 +02:00
michalprusa
5750a8e661
Einy 0.4a filament sensor fix pinout
2017-07-07 08:01:01 +02:00
XPila
76477edf63
Merge pull request #20 from XPila/MK3
...
SG homing - fixed bug - set sg_homing_delay to zero before move.
2017-07-07 07:47:07 +02:00
Robert Pelnar
21974ae07a
SG homing - fixed bug - set sg_homing_delay to zero before move.
2017-07-07 07:45:36 +02:00
michalprusa
3e83df09cc
Merge remote-tracking branch 'origin/MK3' into MK3
2017-07-07 07:36:34 +02:00
michalprusa
52554d72c4
PAT9125 finally able to turn off
2017-07-07 07:34:35 +02:00
XPila
70f6b769ef
Merge pull request #19 from XPila/MK3
...
SWSPI - different pinmapping for EINY03a and EINY04a.
2017-07-07 07:34:19 +02:00
Robert Pelnar
d512456506
SWSPI - different pinmapping for EINY03a and EINY04a.
2017-07-07 07:33:38 +02:00
michalprusa
7ffa42f43a
PAT9125 init result print
2017-07-07 05:41:41 +02:00
michalprusa
ea17fa56d7
Merge remote-tracking branch 'origin/MK3-michal' into MK3-michal
...
# Conflicts:
# Firmware/ultralcd.cpp
2017-07-07 05:00:23 +02:00
XPila
82c1fc978b
Merge branch 'MK3' into MK3-michal
2017-07-07 04:51:01 +02:00
michalprusa
e23f34339e
Power panic improved by turning off Z steppers
...
Dubug outputs for filament and fan rotation sensors moved to special menu Support->Extruder info
XYZ calibration debug now available only while not printing
2017-07-07 04:50:00 +02:00
XPila
c1f6646d08
Merge pull request #16 from XPila/MK3
...
pat9125 filament sensor
2017-07-07 04:46:45 +02:00
Robert Pelnar
ec7678a25f
pat9125 filament sensor
...
sg homing - bug fix + homing multiple axes simultanously (AXIS_MASK)
2017-07-07 04:45:09 +02:00
michalprusa
87ff9db76e
Merge remote-tracking branch 'origin/MK3' into MK3-michal
2017-07-07 02:12:18 +02:00
michalprusa
06fe85e9ee
Linear Advance
2017-07-07 01:58:02 +02:00
PavelSindler
164e01ac7c
Merge pull request #14 from PavelSindler/MK3
...
power panic: extrusion to stabilize pressure, waiting for temperature…
2017-07-06 23:02:40 +02:00
PavelSindler
2ea8e11eea
power panic: extrusion to stabilize pressure, waiting for temperature in homing position
2017-07-06 23:01:59 +02:00
XPila
d109602896
Merge pull request #13 from XPila/MK3
...
TMC2130 - variable Z current reference (IRUN>31 => vsense = 0, IRUN/=…
2017-07-06 22:36:01 +02:00
Robert Pelnar
a21bef25c3
TMC2130 - variable Z current reference (IRUN>31 => vsense = 0, IRUN/=2, IHOLD/=2)
2017-07-06 22:32:21 +02:00
XPila
4fa3cfefc9
Merge pull request #12 from prusa3d/MK3-michal
...
Mesh bed leveling calibrated to new MK42 24V heatbed (rev 0.3b)
2017-07-06 20:47:10 +02:00
michalprusa
3fdb630c42
Mesh bed leveling calibrated to new MK42 24V heatbed (rev 0.3b)
...
Increased currents in Z and E axis
Decreased stallguard sensitivity
E axis microsteps changed to 64
2017-07-06 20:40:56 +02:00
PavelSindler
e521831245
status message during print recovery
2017-07-06 19:31:18 +02:00
PavelSindler
c9d7b65c02
updated z recovery in power panic, added test to main menu
2017-07-06 19:09:06 +02:00
PavelSindler
21f068b37a
changed Z axis recovery in power panic
2017-07-06 17:09:35 +02:00
PavelSindler
8ceca8b9c6
power panic - fixed z axis recovery
2017-07-06 15:52:38 +02:00
PavelSindler
5943e786ee
Merge remote-tracking branch 'upstream/MK3' into MK3
...
sync with upstream # Please enter a commit message to explain why this merge is necessary,
2017-07-06 13:20:02 +02:00
PavelSindler
54ef2936c7
selftest
2017-07-06 13:19:11 +02:00
XPila
78f7923ab2
Merge pull request #10 from XPila/MK3
...
Changed jerks, disabled oversampling, debug code, commands for seting…
2017-07-06 13:07:37 +02:00
Robert Pelnar
2b24e9ceb3
Changed jerks, disabled oversampling, debug code, commands for seting pwm_ampl and pwm_grad (M917, M918), changed configuration files
2017-07-06 13:06:07 +02:00
XPila
458dfa80f6
Merge branch 'MK3' into MK3
2017-07-06 12:55:30 +02:00
PavelSindler
16fffed52d
current feedrate and fan speed stored to eeprom in power panic, number of blocks (linear movements) in planner serve for counting SD card recover position, print fan speed error limit prolonged to 15s
2017-07-05 15:04:43 +02:00
PavelSindler
2c102f8580
fixed SD card restore position (power panic)
2017-07-05 09:16:33 +02:00
PavelSindler
ef7a302626
power panic: Z axis is lowered in position where print starts (is recovered)
2017-07-04 20:58:44 +02:00
Andre Sklenar
9e3d608ba0
Merge branch 'MK3' of github.com:prusa3d/Prusa-Firmware-DEV into MK3
2017-07-04 16:25:53 +02:00
Andre Sklenar
5ab57ab2ad
Init LCD ASAP for a nice UX
2017-07-04 16:25:30 +02:00
Robert Pelnar
b8025e63e6
DEBUG defines, variant files for MK3
2017-07-04 16:23:28 +02:00
PavelSindler
a8678cb2fd
recover print
2017-07-04 11:31:39 +02:00
PavelSindler
d05e62813a
Merge remote-tracking branch 'upstream/MK3' into MK3
...
sync with upstream
2017-07-03 14:08:39 +02:00
PavelSindler
4ae5751d95
added debug messages for serial
2017-07-03 14:08:27 +02:00
Robert Pelnar
176c32de91
TMC2130 stallguard homing - sg_thrs_x and sg_thrs_y - command M916, lcd_silent_mode_set_tune
2017-07-03 10:39:56 +02:00
Robert Pelnar
e09f0c64c7
TMC2130 tuning, silent/high power mode
2017-07-03 07:43:50 +02:00
Robert Pelnar
c4307c7373
TMC2130 tunning, overtemp
2017-07-03 00:11:42 +02:00
PavelSindler
17074e1d25
saving/restoring filename and current position in bytes to eeprom, UVLO changed
2017-07-02 21:01:23 +02:00
PavelSindler
29499510f4
Merge remote-tracking
...
pins
branch 'upstream/MK3' into MK3
pin number correction
2017-07-02 16:10:14 +02:00
PavelSindler
db12119b68
position saving and restoring in UVLO
2017-07-02 00:11:21 +02:00
Robert Pelnar
8b66258745
Pin number correction (TACH_0)
2017-07-01 19:33:56 +02:00
PavelSindler
ae0c64248f
sync with upstream
2017-07-01 19:29:57 +02:00
PavelSindler
c4be651d2b
uvlo initial version
2017-07-01 18:51:02 +02:00
Robert Pelnar
4f9a8147a4
renamed EINY 0.1a to EINY 0.3a
...
added EINY 0.4a
changed jerk (optimized for MK3 silent mode)
2017-07-01 17:28:32 +02:00
Robert Pelnar
f6a8e1df9d
TMC2130 + software SG homing + LF lineendings + tmc2130 debug M-Codes
...
M910 - tmc2130_init
M911 - set holding currents
M912 - set running currents
M913 - print currents
2017-07-01 12:39:16 +02:00
PavelSindler
43d696659f
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
PavelSindler
0578ea527e
fan speed check initial version, selftest updated
2017-06-28 14:24:45 +02:00
michalprusa
fd2a1f1df4
Resolution setting fixed
2017-06-17 20:54:59 +02:00
michalprusa
6f3c28c4a7
Filament sensor PAT9125 implemented
2017-06-17 20:40:22 +02:00
michalprusa
21177476ac
StallGuard homing implemented, working
2017-06-17 16:58:36 +02:00
michalprusa
3e642d61cb
Stepper Y inverted, current lowered.
2017-06-17 15:58:26 +02:00
michalprusa
c83b1833bc
Johhny Firmware sync
2017-06-17 15:42:48 +02:00
michalprusa
1224705edc
Added EINY config
2017-03-24 20:16:29 +01:00
michalprusa
cabaec95c8
EINY implementation
2017-03-24 20:16:03 +01:00
michalprusa
3faef75a0d
3.0.10 sync
2017-03-24 19:47:50 +01:00
bubnikv
99ae9707de
Fixed a missing SD card error on start up, if the setup was blocked
...
by some dialog for an extended period of time.
Increased version to 3.0.8 final.
2016-09-01 16:52:46 +02:00
bubnikv
fe61647e68
Multi screen messages will display a "next page" indicator
...
if a next page follows.
2016-09-01 15:14:55 +02:00
bubnikv
50a0ca8519
Italian translations.
2016-09-01 14:10:41 +02:00
bubnikv
25024d8975
Added Spanish translations.
2016-09-01 14:07:27 +02:00
bubnikv
163db2f362
Fixed a bug in the optimized fixed point planner.
2016-09-01 13:31:50 +02:00
bubnikv
25b4675823
Updated Polish texts.
2016-09-01 13:13:21 +02:00
bubnikv
29cb4b2b5d
Removed the non-working pressure advance feature.
...
Improved accuracy of diagonal moves by oversampling the path discretization.
Accelerated the planner by rewriting time critical routines from floating
point to fixed point arithmetics.
2016-09-01 13:09:56 +02:00
bubnikv
930ed11e90
Updated texts.
2016-09-01 11:19:32 +02:00
bubnikv
b470e103dc
Reset live adjust on XYZ calibration.
...
Disable timeouts in the XYZ/Z calibration.
Don't modify feed rate multiplier during the XYZ/Z calibration.
Support multi screen messages in the XYZ/Z calibration - "move the Z carriages up" step.
Support up to three lines in the XYZ/Z calibration messages.
Added a new message "Measuring reference height of calibration point xx of 9".
Changed the "move the Z carriages up" message to suggest rotating the knob.
Changed the "live adjust not set" message to reference the manual chapter and section.
Remove debugging serial line output on Z calibration.
2016-09-01 10:44:24 +02:00
bubnikv
26405ee16f
Syncing with 3.0.7 public
2016-08-31 17:12:05 +02:00
michalprusa
307d17422d
3.0.6 sync
2016-08-11 10:42:53 +02:00
michalprusa
30f0528aba
Initial commit
2016-07-22 15:28:01 +02:00
bubnikv
986b286803
Reworked calculation of the trapezoidal ramps inside the planner.
...
The old implementation seems to be buggy, it accesses segments
outside the queue, causing jerks and skipped steps.
2016-07-22 10:37:06 +02:00
bubnikv
5c56e472fe
Show the Toshiba FlashAir IP address in the menu.
2016-07-22 10:31:30 +02:00
bubnikv
2e66fdf84a
Merge branch 'MK2' of https://github.com/Prusa3D/Prusa-Firmware into MK2
2016-07-21 10:49:48 +02:00
bubnikv
562c089e17
Initial implementation of the Toshiba FlashAir support:
...
Get the status of the Toshiba FlashAir, namely its IP address.
The IP address is currently reported through an M46, but this
is subject to change and the IP address shall be shown on the display.
2016-07-21 10:48:08 +02:00
akukan
c8c92f8ae5
PLA preheat settings for MK2 set to 215/55
2016-07-20 16:30:44 +02:00
akukan
e9910a9078
Print farm confirmation
2016-07-20 16:05:20 +02:00
akukan
1b2676baac
Farm monitoring
2016-07-20 15:02:52 +02:00
bubnikv
ea6a948c6b
Removed the dual carriage code for readibility.
...
Removed support for the slow Toshiba stepper drivers.
2016-07-19 10:57:18 +02:00
bubnikv
2e6e4542c9
Undo babystepping in Z before G28 / G80, if applied already.
...
Update babystepsTodo atomically (disable / enable interrupts).
Disable debugging outputs on the serial line from the X/Y calibration code.
OctoPrint fix - fixes a hangup after G28: Link the G28->G80 G codes
by calling the G80 code directly without pushing it into the command buffer.
SD card driver patch to support the Toshiba FlashAir SD/WiFi card.
2016-07-18 17:28:54 +02:00
bubnikv
3c21438392
In addition to the firmware version number, store the "PRUSA3D"
...
magic at the beginning of the EEPROM,
so at the upgrade the firmware would know, if the previous firmware
was a Prusa3D firmware.
2016-07-08 09:49:15 +02:00
bubnikv
d825c5ffac
Write the current firmware version into first 8 bytes of the EEPROM,
...
so the firmware will have a chance to find out, that it has been
upgraded.
2016-07-07 22:01:51 +02:00
bubnikv
d4e332112b
Reset babystepping value on startup, if the Z live adjust is off.
...
This is necessary so the Z axis will not go havoc when the Z live adjust
is enabled.
2016-07-07 21:34:13 +02:00
bubnikv
591e81777a
"Printer has not been calibrated yet, calibrate Z" message on startup,
...
if EEPROM_BABYSTEP_Z_SET equals 0x0ff.
2016-07-07 21:23:32 +02:00
bubnikv
208976f397
Ignore extended ASCII characters. These characters have no meaning in the G-code apart from the file names
...
and Marlin does not support such file names anyway.
Serial characters with a highest bit set to 1 are generated when the USB cable is unplugged, leading
to a hang-up of the print process from an SD card.
2016-07-07 20:31:11 +02:00
bubnikv
0b372bfc94
Added a new feature to the "M115" code:
...
"M115 Umajor.minor.revision-flavor" will trigger a dialog
on the display if the "upgrade" firmware version number is higher
than the current version number.
2016-07-07 20:26:59 +02:00
bubnikv
d7c75f2060
Updated soft end stops with the skew calibration active.
...
Updated changes between the corrected / uncorrected XY axes.
2016-07-07 11:51:24 +02:00
bubnikv
a88c0a30e7
Fixed a non-C++ implementation of the PRUSA specific G-Codes.
...
Yet another improvements of the bed skew calibration.
2016-07-06 16:12:04 +02:00
bubnikv
1394e7efc6
Skew calibration: Yet another improvement of the search algorithm
...
of the front row induction sensor targets.
Fixes of some movements behind the end stops.
2016-07-06 09:34:42 +02:00
bubnikv
58b2aa9fb8
Improvement of the bed skew calibration.
2016-07-04 19:00:42 +02:00
bubnikv
0389b23514
Rewrote the fitting routine of the induction sensor points to the measured points
...
from Linear Least Squares to Nonlinear Least Squares to maintain unity length of machine axes.
Improved the scanning of the 1st row of the induction points.
2016-07-01 09:13:15 +02:00
bubnikv
677c13fc9a
Improved the bed auto calibration at the Y=0 edge of the bed.
...
Fixed problems with step motors being disabled after inactivity.
2016-06-24 15:44:31 +02:00
bubnikv
80971237b8
Polished the bed skew and shift calibration.
2016-06-23 19:08:45 +02:00
bubnikv
c24f3369d7
Fixed a bug in babystepping: The babystep value will be written to EEPROM
...
at the end of the menu only.
Provided a general method for a menu function to detect exiting by a timeout.
When exiting, the menu function is called with a global variable menuExiting set.
Some errorneously removed functions were reverted.
2016-06-23 11:15:47 +02:00
bubnikv
78ebd522b6
Removed support for DELTA, SCARA and BARICUDA.
...
Implemented bed skew calibration by matching a precise physical model
to the measured data using the least squares method.
Rewrote handling of the command buffer to preserve memory
and allow pushing the commands to the front of the queue.
2016-06-23 08:46:15 +02:00
bubnikv
08bf6acf1b
Fixed ".." label when leaving a subdirectory.
...
Made the hidden and system files invisible when browsing the SD card.
2016-06-20 13:46:37 +02:00
bubnikv
d9da3c4c7f
Bugfix of the "Move Z carriages up" step.
2016-06-16 15:52:58 +02:00
bubnikv
6cff4b92ff
Automatic bed calibration by searching the 3x3 point matrix.
...
Fixed a problem with low RAM by re-vamping the langtool.
2016-06-16 14:29:04 +02:00
michalprusa
e115c5145f
MK2 Config files and hex output added
2016-05-31 14:36:31 +02:00
michalprusa
a4a80b3eb7
MK2 Firmware release.
2016-05-31 14:08:04 +02:00
michalprusa
7361f620d3
Extrude mintemp lowered for wax filaments support
2016-05-01 15:04:44 +02:00
michalprusa
9b8d663526
Better live adjust Z interface
2016-05-01 13:56:55 +02:00
michalprusa
d1df17a722
Tweaked mesh positions
2016-04-28 17:00:20 +02:00
michalprusa
7bfe91483d
Calibration process added
2016-04-28 14:50:25 +02:00
michalprusa
1ce1088d6f
Bed PID added and minor tweaks
2016-04-19 11:32:22 +02:00
michalprusa
d7417e1dd3
Mesh Bed Leveling rewritten, upcaling of tiles, better bed finding method and minor other tweaks.
2016-04-01 16:48:48 +02:00
michalprusa
4263792793
Planning move in mesh rewritten.
2016-03-25 15:56:51 +01:00
michalprusa
7f9e947954
Added debug output
2016-03-25 14:53:55 +01:00
michalprusa
f98cf1b44b
Added automatic mesh bed leveling feature
2016-03-12 17:14:11 +01:00
michalprusa
657f339d95
Development branch version mark added
2016-03-12 07:07:22 +01:00
michalprusa
533c3e4e1a
Language file generator tweaked
...
Now checking if every language has defined all strings!
2016-03-10 19:15:30 +01:00
michalprusa
8ff414d408
Removed sublime project files
2016-03-10 18:55:08 +01:00
michalprusa
e67d7ed4e3
Fixed missing string in polish language
2016-03-09 17:42:50 +01:00
michalprusa
95dd729904
Compiled output 2.2.4 version
2016-03-08 21:12:24 +01:00
michalprusa
37d3e4278d
Added languages and minor tweeks
...
Added ES,IT and PL languages. Modified first run procedure to get FW
working on printers without LCD
2016-03-08 20:34:39 +01:00
michalprusa
4ce950c994
Minor tweeks
...
Magic constants moved to one place, fixed gcode for reseting Live
adjusting Z
2016-03-08 16:24:50 +01:00
michalprusa
feb82d42eb
M119 report fixed and added new gcode
...
Fixed reporting enstop status and added PRUSA LiveZ to reset live Z
adjusting
2016-02-25 12:27:08 +01:00
michalprusa
12cce64f90
Variants name changed for better readability and match command reply
2016-02-21 18:12:32 +01:00
Josef Prusa
f8c65e39ae
Reorginized the repository and added license
2016-02-21 15:02:31 +01:00
