3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,857 Commits 3 Branches 78 Tags 40 MiB
b5168bd6c2
Commit Graph

843 Commits

Author SHA1 Message Date
Marek Bel
d80fcab66c Disable filament sensor response quality check. 2018-09-25 15:50:50 +02:00
Marek Bel
19c1ba6274 Remove duplicate condition. This condition was already in if(mmu_enabled) {} else branch. 2018-09-25 14:25:03 +02:00
Marek Bel
c38fef281d Use cs.max_feedrate_silent, cs.max_acceleration_units_per_sq_second_silent from ConfigurationStore. 2018-09-24 17:33:58 +02:00
Marek Bel
ca179a2d18 Use cs.filament_size from ConfigurationStore. 2018-09-24 17:29:02 +02:00
Marek Bel
e225e9cab0 Use cs.volumetric_enabled from ConfigurationStore. 2018-09-24 17:12:16 +02:00
Marek Bel
a201128b20 Use cs.retract_length, cs.retract_feedrate, cs.retract_zlift, cs.retract_recover_length and cs.retract_recover_feedrate from ConfigurationStore. 2018-09-24 17:10:25 +02:00
Marek Bel
7e593e6922 Use cs.autoretract_enabled from ConfigurationStore. 2018-09-24 17:03:10 +02:00
Marek Bel
20ba2b1c79 Use cs.bedKp, cs.bedKi and cs.bedKd from ConfigurationStore. 2018-09-24 16:57:48 +02:00
Marek Bel
54bcc8aa52 Use cs.Kp, cs.Ki and cs.Kd from ConfigurationStore. 2018-09-24 16:54:50 +02:00
Marek Bel
f2ae3fb1f7 Use cs.zprobe_zoffset from ConfigurationStore. 2018-09-24 16:47:57 +02:00
Marek Bel
959d0069fa Use cs.add_homing from ConfigurationStore. 2018-09-24 16:42:28 +02:00
Marek Bel
ac7c062161 Use cs.max_jerk from ConfigurationStore. 2018-09-24 16:35:33 +02:00
Marek Bel
bb66bfe6a7 Use cs.minsegmenttime from ConfigurationStore. 2018-09-24 16:22:50 +02:00
mkbel
0e7afc67ca
Merge pull request #1175 from PavelSindler/eeprom_version 
M500 EEPROM version update and M500 EEPROM block size check
 2018-09-24 16:19:55 +02:00
Marek Bel
10428b30d9 Use cs.mintravelfeedrate from ConfigurationStore. 2018-09-24 16:01:58 +02:00
Marek Bel
26e2fd1c76 Use cs.minimumfeedrate from ConfigurationStore. 2018-09-24 15:57:24 +02:00
Marek Bel
b8fefceb4d Use cs.retract_acceleration from ConfigurationStore. 2018-09-24 15:53:35 +02:00
Marek Bel
7dbe0afdc4 Use cs.acceleration from ConfigurationStore. 2018-09-24 15:47:36 +02:00
Marek Bel
cee51cf9c3 Use cs.max_acceleration_units_per_sq_second_normal from ConfigurationStore. 2018-09-24 15:40:35 +02:00
Marek Bel
02becb5e6a Use cs.max_feedrate_normal from ConfigurationStore. 2018-09-24 15:09:19 +02:00
PavelSindler
053b94b711 remove "start" duplicity in setup 2018-09-24 14:57:46 +02:00
Marek Bel
3f28632443 Use cs.axis_steps_per_unit from ConfigurationStore. 2018-09-24 14:54:41 +02:00
PavelSindler
752aec37fb M500 EEPROM version changed; if EEPROM_M500_SIZE is not updated, data are not stored 2018-09-19 14:36:26 +02:00
PavelSindler
1253fb338a wizard hotfix 2018-09-10 18:02:54 +02:00
Marek Bel
001680bbdc Merge branch 'MK3' into time_remaining_fix 
# Conflicts:
#	Firmware/Marlin_main.cpp
 2018-09-07 08:21:36 +02:00
mkbel
801f8e93e8
Merge pull request #1112 from PavelSindler/MK25_time_remaining 
MK25: always show "normal mode" remaining time (PFW-553)
 2018-09-07 08:05:16 +02:00
PavelSindler
2f02828273 time remaining fix 2018-09-07 02:02:35 +02:00
PavelSindler
66305b3e04 MK25: always show "normal mode" remaining time 2018-09-06 23:05:36 +02:00
PavelSindler
40679dcb3a
Merge branch 'MK3' into MK3 2018-09-05 00:06:48 +02:00
MRprusa3d
25a22120fb 1-st Layer Calibration correction 
filament loading improvement
 2018-08-30 03:32:33 +02:00
PavelSindler
b284c70d9b auto deplete: dont eject filament 2018-08-29 13:08:09 +02:00
PavelSindler
515e78cfd1 Eject filament feature in menu, M600: if it was envoked by FINDA, eject filament 2018-08-29 01:58:28 +02:00
PavelSindler
d290543d7d
Merge pull request #1085 from mkbel/fix_active_filament 
Fix active filament PFW-528
 2018-08-28 23:50:57 +02:00
Marek Bel
2cd8691376 Do not use global variable tmp_extruder when setting temperature. 2018-08-28 20:26:33 +02:00
MRprusa3d
0695f3f345 Z-move correction 
Z-move inhibition after FactoryReset
 2018-08-28 19:58:03 +02:00
Marek Bel
8aeb7e04f1 Fix bound check for T0 .. T4 command. Document mmu_load_to_nozzle(). 2018-08-28 18:52:16 +02:00
Marek Bel
55eaa1de83 Fix code indentation. 2018-08-28 18:26:10 +02:00
Marek Bel
9fb68fb724 Remove usage of global variable tmp_extruder in M200. 2018-08-28 18:08:21 +02:00
PavelSindler
3e2cb72695
Merge branch 'MK3' into auto_deplete_2 2018-08-28 11:01:30 +02:00
Marek Bel
2a00e5d348 Fix loading filament screen hangs if changed automatically. 2018-08-27 20:09:22 +02:00
PavelSindler
191e5dfddd mmu M600: dont use change extruder posibility; unload starts always imidiately 2018-08-27 16:12:10 +02:00
PavelSindler
168bc74102
Merge pull request #1075 from PavelSindler/mmu_filament_sensor 
Mmu filament sensor
 2018-08-27 05:26:12 +02:00
PavelSindler
b01e2a1a22
Merge pull request #1073 from PavelSindler/M600_mmu_fix 
M600 mmu fix
 2018-08-27 05:26:00 +02:00
PavelSindler
03fffae4c3 finda runout sensor can be turned on/off from menu 2018-08-27 05:20:42 +02:00
PavelSindler
ceb49d1262 finda filament runout: initial version 2018-08-27 04:21:43 +02:00
PavelSindler
d3ed270a5a single material printer (no mmu unit) M600 hotfix: M600_check_state loop working 2018-08-26 23:52:45 +02:00
PavelSindler
2610547a48 Fixed displayed filament after load 2018-08-26 16:39:21 +02:00
PavelSindler
85358342bc
Merge pull request #1065 from PavelSindler/mmu_v2_continue_loading 
Mmu v2: continue loading command
 2018-08-25 20:03:12 +02:00
PavelSindler
f3edd37d11 removing unretract 2018-08-25 16:52:19 +02:00
PavelSindler
68f2e22dad continue loading command 2018-08-24 18:28:05 +02:00
MRprusa3d
5dc2af961b ShippingPrepare & M600 
message after ShippingPrepare
M600 :: better filament (un)retraction
 2018-08-23 00:08:14 +02:00
Robert Pelnar
315bfc43dd MMU communication fix 2018-08-21 16:41:01 +02:00
Robert Pelnar
94423e6f7e MMU communication - mmu_ready 2018-08-20 20:53:53 +02:00
Robert Pelnar
c4281b0b36 Status screen redesign - fix of flickering and text wraping on status screen 
printf formating, saved flash, reduced code size
 2018-08-20 00:27:45 +02:00
Robert Pelnar
fd9516f520 Status screen - status message logic simplification 
added definitions of custom_message_type values
removed flag custom_message (previous solution maybe caused displaying of empty status line)
fixed in Marlin_main.cpp code "custom_message = _T(MSG_TEMP_CALIBRATION)"
 2018-08-19 18:34:57 +02:00
Robert Pelnar
f1ad1d22ba Menu lcd_adjust_bed fixed (Bed level correction, PFW-499) 2018-08-19 13:59:33 +02:00
Robert Pelnar
8409a26594 Live adjust Z - display zero in case of invalid calibration status (same logic in babystep_load and _lcd_babystep) 2018-08-10 19:55:50 +02:00
Robert Pelnar
9ee7a2124b removed unused code 2018-08-09 18:43:07 +02:00
Robert Pelnar
796079bb08 MMU2 communication - connection after reset, fw versions, state machine 
+removed debug log from tmc2130
 2018-08-09 17:43:43 +02:00
Robert Pelnar
310751397c line endings + fixed declaration 2018-08-08 20:11:57 +02:00
Robert Pelnar
990a5c9119 PFW489 (github issue 1008) - time remaining variables declared as uint32 2018-08-08 19:51:50 +02:00
Robert Pelnar
23e5cea5d0 MMU - code cleaning (modularity) 
M403 set filament type
hardware reset
 2018-08-08 18:58:03 +02:00
Robert Pelnar
9e09efc9f4 Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang 
conflicts + fix
 2018-08-07 20:55:08 +02:00
Robert Pelnar
71f1a1f6db MMU - communication, check after start, code cleaning 2018-08-07 20:37:59 +02:00
PavelSindler
d21e527c73 PRUSA Fir reports also buildnumber 2018-08-05 20:17:04 +02:00
PavelSindler
cf06c5171c merge with upstream 2018-08-03 18:43:09 +02:00
PavelSindler
a1f69e0924 manage response update 2018-08-03 18:37:52 +02:00
PavelSindler
5824da8310 add more extrusion to M600 load filament 2018-08-03 15:42:06 +02:00
bubnikv
dd4c4b39b4 Added support for the upstream Marlin interpretation of the M204 code: 
M204 S.. T..:
T is interpreted the old way (as acceleration when retracting)
only if an S code is found at the same line.
This allows PrusaResearch to interpret the legacy G-codes generated
by our older Slic3r with older Slic3r profiles.

M204 P.. R.. T..:
T is ignored, P is interpreted as acceleration when extruding,
R is interpreted as acceleration when retracting.
This will be the format the Slic3r 1.41.0 will produce from
the Machine Limits page.
In the future both MK3 firmware and Slic3r will likely be extended
to support the separate travel acceleration.

This change will help us to solve the following Slic3r issue:
https://github.com/prusa3d/Slic3r/issues/1089
 2018-08-03 15:33:41 +02:00
PavelSindler
ae7561bb27 M600 fix: set hotend temperature to correct value, manage_response function fix: now works in case that user presses button on mmu unit before he is asked to do it, compiler warnings (uninitialized variables) fixed 2018-08-03 15:26:39 +02:00
Robert Pelnar
468873ec68 MMU2 - removed conditional translation for SNMM_V2, new module mmu 2018-08-02 18:54:00 +02:00
Robert Pelnar
282ff6c577 removed unused union 2018-08-02 17:09:02 +02:00
Robert Pelnar
d378575a68 SNMM_V2 - default retraction declared as variable 2018-08-02 17:07:09 +02:00
PavelSindler
ac60b3ebe7
Merge pull request #996 from PavelSindler/snmm_v2 
M600 updated
 2018-08-01 19:39:08 +02:00
XPila
618aea25d6
Merge pull request #995 from PavelSindler/filament_type 
snmm v2: send filament type to mmu
 2018-08-01 19:33:44 +02:00
PavelSindler
24e7f0d0ec mmures fix 2018-08-01 19:29:50 +02:00
PavelSindler
06063118bd M600 updated 2018-08-01 18:47:28 +02:00
Marek Bel
b0077182e5 Merge branch 'Fix_warnings_ledvinap' into fix_compiler_warnings 2018-08-01 17:53:49 +02:00
PavelSindler
54adb0beea missing eol added 2018-08-01 16:54:26 +02:00
PavelSindler
b35ef498f0 comments updated 2018-08-01 16:46:46 +02:00
Marek Bel
665a885a21 Merge commit 'baddf38dbc2c72ab095deaf9b3e251ea2faeb699' into fix_compiler_warnings 2018-08-01 16:44:17 +02:00
PavelSindler
135c4db5da gcode for filemant type initial version: just re-sending information to mmu 2018-08-01 15:43:13 +02:00
PavelSindler
0e059f8da6 single material fix: remove semicolon, unload_filament() function definition 2018-08-01 11:33:58 +02:00
PavelSindler
e153a29bdb messages corrected, 5 minutes timeout when communicating with mmu 2018-08-01 10:42:09 +02:00
PavelSindler
45ac42caff snmm v2: manage response: wait for nozzle temp only when heating 2018-08-01 09:58:07 +02:00
PavelSindler
be1167fae3 M600 for multimaterial: don't check if filament unload was succesfull 2018-07-31 19:18:09 +02:00
PavelSindler
40da6deef8 timeouts used when getting response from mmu, M600 improvements, no filament sensor in variants file 2018-07-31 19:00:42 +02:00
PavelSindler
04d0178150 automatic M600 initial version 2018-07-31 12:24:22 +02:00
PavelSindler
67f56d3de9 merge with upstream 2018-07-30 17:24:58 +02:00
MRprusa3d
970ba6fa2a Sound 
all cases
 2018-07-29 22:59:14 +02:00
PavelSindler
5bc40aff85
Merge pull request #975 from XPila/MK3-new_lang 
EEPROM dump (code D3)
 2018-07-26 19:59:09 +02:00
Robert Pelnar
2f9003dbdd fsensor - better state handling 2018-07-26 19:50:33 +02:00
PavelSindler
9235ffb497 T code for SNMM_V2 fix 2018-07-26 17:03:43 +02:00
Robert Pelnar
691e7a24ed EEPROM dump (code D3) 2018-07-26 13:20:35 +02:00
PavelSindler
cadb2e9cfe
Merge pull request #973 from MRprusa3d/MK3 
PowerPanic IV
 2018-07-26 09:40:57 +02:00
MRprusa3d
5be82962ee PowerPanic IV 2018-07-25 19:24:41 +02:00
PavelSindler
59c0127b77 automatic M600 for mmu v2: work in progress 2018-07-25 16:48:39 +02:00
Marek Bel
702fa307bb Fix compiler warning sketch/Marlin_main.cpp:478:14: warning: 'delta' defined but not used [-Wunused-variable]. 
Variable was never used since "Initial commit".
 2018-07-25 15:08:17 +02:00
Marek Bel
98ba79e518 Fix out of array bounds access. 
Manifested as compiler warnings:

In file included from sketch/Marlin_main.cpp:67:0:
sketch/temperature.h: In function 'bool gcode_M45(bool, int8_t)':
sketch/temperature.h:142:30: warning: array subscript is above array bounds [-Warray-bounds]
   target_temperature[extruder] = celsius;
                              ^
sketch/temperature.h:142:30: warning: array subscript is above array bounds [-Warray-bounds]
   target_temperature[extruder] = celsius;
                              ^
sketch/temperature.h: In function 'void long_pause()':
sketch/temperature.h:142:30: warning: array subscript is above array bounds [-Warray-bounds]
   target_temperature[extruder] = celsius;
                              ^
sketch/temperature.h:142:30: warning: array subscript is above array bounds [-Warray-bounds]
   target_temperature[extruder] = celsius;
                              ^
sketch/temperature.h: In function 'void process_commands()':
sketch/temperature.h:142:30: warning: array subscript is above array bounds [-Warray-bounds]
   target_temperature[extruder] = celsius;
                              ^
sketch/temperature.h:142:30: warning: array subscript is above array bounds [-Warray-bounds]
   target_temperature[extruder] = celsius;
                              ^
 2018-07-25 12:52:02 +02:00
Marek Bel
e6dcbedf82 Fix compiler warning: sketch/Marlin_main.cpp:8833:16: warning: variable 'nplanner_blocks' set but not used [-Wunused-but-set-variable] 2018-07-25 11:58:48 +02:00
Marek Bel
b357399c6b Fix compiler warning sketch/Marlin_main.cpp:1846:1: warning: control reaches end of non-void function [-Wreturn-type]. 2018-07-25 11:54:55 +02:00
Marek Bel
c7de8a91bb Fix compiler warning sketch/Marlin_main.cpp:8811:10: warning: unused variable 'extruder_abs_pos' [-Wunused-variable] 
Variable started to be unused in commit
fde0efc75c
power panic for absolute E coordinates: initial version
and its author told me that the change was intentional.
 2018-07-25 11:33:32 +02:00
Marek Bel
0f577cace6 Fix compiler warning: sketch/Marlin_main.cpp:8759:8: warning: unused variable 'c' [-Wunused-variable] 2018-07-24 19:40:43 +02:00
Marek Bel
bd868132cc Fix compiler warnings: 
sketch/Marlin_main.cpp:8756:8: warning: unused variable 'x_rec' [-Wunused-variable]
sketch/Marlin_main.cpp:8756:15: warning: unused variable 'y_rec' [-Wunused-variable]
sketch/Marlin_main.cpp:8756:22: warning: unused variable 'z_pos' [-Wunused-variable]
 2018-07-24 19:31:18 +02:00
Marek Bel
c19bf72ba9 Fix compiler warning sketch/Marlin_main.cpp:8220:15: warning: unused variable 'k' [-Wunused-variable]. 2018-07-24 18:33:44 +02:00
Marek Bel
3f0684ea30 Fix compiler warning - remove unused variable. 2018-07-24 18:27:05 +02:00
Marek Bel
f7754faaf1 Fix compiler warning sketch/Marlin_main.cpp:7092:14: warning: variable 'make_move' set but not used [-Wunused-but-set-variable] 2018-07-24 18:06:38 +02:00
Marek Bel
68a3ae5456 Fix compiler warning sketch/Marlin_main.cpp:6331:11: warning: unused variable 'cnt' [-Wunused-variable] 2018-07-24 17:57:26 +02:00
Marek Bel
b44f71fd33 Fix compiler warning sketch/Marlin_main.cpp:6267:16: warning: variable 'TooLowZ' set but not used [-Wunused-but-set-variable] 
int8_t TooLowZ = 0;

This variable was unused even in "Initial commit".
 2018-07-24 17:30:37 +02:00
Marek Bel
d5ab657cdf Fix compiler warnings: 
file included from sketch/Configuration_prusa.h:2:0,
                 from sketch/Configuration.h:43,
                 from sketch/Marlin.h:22,
                 from sketch/Marlin_main.cpp:46:
sketch/Marlin_main.cpp: In function 'void process_commands()':
sketch/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h:106:33: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
 #define NORMAL_MAX_ACCEL_XY     2500ul  // max acceleration in normal mode in mm/s^2
                                 ^
sketch/Marlin_main.cpp:5772:16: note: in expansion of macro 'NORMAL_MAX_ACCEL_XY'
      if (val > NORMAL_MAX_ACCEL_XY)
                ^
sketch/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h:102:34: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
 #define SILENT_MAX_ACCEL_XY      960ul  // max acceleration in silent mode in mm/s^2
                                  ^
sketch/Marlin_main.cpp:5774:23: note: in expansion of macro 'SILENT_MAX_ACCEL_XY'
      if (val_silent > SILENT_MAX_ACCEL_XY)
 2018-07-24 17:22:29 +02:00
Marek Bel
3a532a46bb Fix compiler warning sketch/Marlin_main.cpp:5737:15: warning: unused variable 'area' [-Wunused-variable] 
This variable was unused even in "Initial commit".
 2018-07-24 17:17:44 +02:00
Marek Bel
97ec55b951 Fix compiler warning sketch/Marlin_main.cpp:4307:7: warning: unused variable 'Z_PROBE_FEEDRATE' [-Wunused-variable]. 
This variable was unused even in "Initial commit".
 2018-07-24 17:07:21 +02:00
Marek Bel
8575645eec Fix compiler warning: sketch/Marlin_main.cpp:4193:15: warning: statement has no effect [-Wunused-value] 
fan_speed[1];
 2018-07-24 16:56:56 +02:00
Marek Bel
9edb07afa5 Fix compiler warning sketch/Marlin_main.cpp:4218:10: warning: variable 'verbosity_level' set but not used [-Wunused-but-set-variable] 2018-07-24 16:54:12 +02:00
Marek Bel
219b98b7e1 Fix compiler warnings: sketch/Marlin_main.cpp: In function 'void setup()': 
sketch/Marlin_main.cpp:1478:57: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
  if ((farm_mode == 0xFF && farm_no == 0) || (farm_no == 0xFFFF)) farm_mode = false; //if farm_mode has not been stored to eeprom yet and farm number is set to zero or EEPROM is fresh, deactivate farm mode
                                                         ^
sketch/Marlin_main.cpp:1479:17: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
  if (farm_no == 0xFFFF) farm_no = 0;
                 ^
 2018-07-24 16:25:10 +02:00
Marek Bel
5ceece08f8 Fix compiler warning sketch/Marlin_main.cpp:1072:46: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] 
if ((state * LANGBOOT_BLOCKSIZE) < header.size)
 2018-07-24 16:07:28 +02:00
Marek Bel
3811e30df9 Fix compiler warning: sketch/Marlin_main.cpp:1042:40: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] 2018-07-24 16:04:19 +02:00
Marek Bel
0bde84983b Fix compiler warning sketch/Marlin_main.cpp:798:6: warning: unused variable 'cursor_pos' [-Wunused-variable] 2018-07-24 15:47:39 +02:00
Martin Remiš
c7d7389e27 PowerPanic & Sound 2018-07-23 20:04:47 +02:00
PavelSindler
d347cdaf1a
Merge pull request #960 from XPila/MK3-new_lang 
BOOTAPP support defined for EINSY
 2018-07-23 17:32:08 +02:00
XPila
0659cf0287
Merge pull request #953 from PavelSindler/farm_mode_fix 
G98 saves farm number
 2018-07-23 17:31:42 +02:00
Robert Pelnar
6444573c92 BOOTAPP support defined for EINSY 
W25x20CL test before entering optiboot (in some error cases it hangs in optiboot and then message not shown)
 2018-07-23 17:14:18 +02:00
Robert Pelnar
4eb4924d81 Optiboot enabled 2018-07-23 14:41:10 +02:00
PavelSindler
b688bc9294
Merge branch 'MK3' into reapply_fix_compiler_warnings 2018-07-23 14:38:43 +02:00
PavelSindler
dcf3b792be
Merge pull request #948 from XPila/MK3-new_lang 
FSensor - optical quality meassurement
 2018-07-23 14:37:16 +02:00
Marek Bel
88cce94cf9 Revert "Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"" 
This reverts commit 77426b563a.
 2018-07-23 13:35:38 +02:00
PavelSindler
1a9643c892 G98 saves farm no 2018-07-23 11:49:06 +02:00
PavelSindler
18419eefc4 no timeouts when communicating with mmu (temporarily ?) 2018-07-23 10:50:58 +02:00
Robert Pelnar
60b4db15e0 FSensor - M600 fix + cond. translation + tunning filter and params 2018-07-22 16:14:13 +02:00
Robert Pelnar
c6a3f073dd FSensor - M600/autoload fix + optical quality meassurement 2018-07-21 17:04:29 +02:00
Robert Pelnar
f07d08697a max_feedrate and max_acceleration limitation fix (M201, M203) 2018-07-21 12:24:57 +02:00
Robert Pelnar
2e260aeccc FSensor - autoload fixed 2018-07-21 01:30:16 +02:00
Robert Pelnar
1309c52bcf FSensor - code cleaning + simplification 
+ removed DEBUG_DISABLE_FSENSORCHECK
+ added FILAMENT_SENSOR
 2018-07-20 23:48:00 +02:00
Robert Pelnar
ca2d69271c filament_autoload_enabled renamed to fsensor_watch_autoload 2018-07-20 20:37:50 +02:00
Robert Pelnar
328cae1147 Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang 
# Conflicts:
#	Firmware/Marlin_main.cpp
 2018-07-20 20:35:00 +02:00
Robert Pelnar
0f91bf9527 FSensor - optical quality meassurement durring load filament 2018-07-20 20:30:08 +02:00
PavelSindler
eac963e3a0 timeout prolonged 2018-07-20 18:03:52 +02:00
PavelSindler
80ca5f3d33 merge with upstream fixes 2018-07-20 17:51:44 +02:00
PavelSindler
814572fed5 merge with upstream 2018-07-20 17:22:06 +02:00
PavelSindler
5fd1acaf81
Revert "PowerPanic" 2018-07-20 15:20:57 +02:00
Robert Pelnar
fd9b9acf4e FSensor, code cleaning + optical quality meassurement 2018-07-20 14:03:22 +02:00
PavelSindler
b0ebea0c61 mmu: switching extruders simplified 2018-07-20 13:20:07 +02:00
MRprusa3d
bbec1ccfd4
Add files via upload 2018-07-20 04:34:12 +00:00
MRprusa3d
a09d44b869 PowerPanic 
experimental
 2018-07-20 04:47:33 +02:00
Robert Pelnar
5483bee885 FSensor - meassuring filament optical quality 2018-07-19 20:55:38 +02:00
PavelSindler
538f8a8858 Merge remote-tracking branch 'upstream/MK3' into snmm_v2 2018-07-19 20:27:51 +02:00
PavelSindler
231a6dcf1b M600 for single material fix 2018-07-19 20:27:39 +02:00
PavelSindler
86882ae10a M600 for snmm_v2 intial working version 2018-07-19 20:16:42 +02:00
Robert Pelnar
2a66251170 _DISABLE_M42_M226 removed 2018-07-19 19:33:28 +02:00
Robert Pelnar
fd0b7c25e5 TMC2130 speed and accel limitation (M201, M203) for stealth and normal mode 2018-07-19 19:12:46 +02:00
Robert Pelnar
2ce210a8bb TMC2130 feedrate and acceleration limitation - separate profiles for normal and stealth mode 2018-07-19 18:56:01 +02:00
PavelSindler
5fecb7a2dc M600 2018-07-19 16:17:46 +02:00
PavelSindler
3cb3ec9975
Merge pull request #940 from XPila/MK3-new_lang 
Filament sensor tunning
 2018-07-19 15:22:47 +02:00
PavelSindler
7600848533 load to nozzle function, M600 work in progress 2018-07-19 13:14:29 +02:00
Robert Pelnar
afb9ca4687 FSensor - removed fsensor blocking while load, added filament quality meassurement 2018-07-18 17:45:54 +02:00
PavelSindler
5676550452 missing get response readded 2018-07-18 16:52:10 +02:00
PavelSindler
b9be718deb timeout used everywhere where we are waiting for mmu reponse 2018-07-18 16:25:31 +02:00
PavelSindler
0a43b9ce6b timeout when waiting for mmu OK 2018-07-18 16:17:45 +02:00
PavelSindler
6e760ef76d merge with upstream cleanup 2018-07-18 15:34:33 +02:00
Petr Ledvina
48d6ebffd8 Fix code_seen 
char/string version was mixed
 2018-07-17 18:57:28 +02:00
Petr Ledvina
3f17364589 Fix various warnings 2018-07-17 18:57:28 +02:00
Petr Ledvina
7bbf9953f2 Fix missing return warnings 2018-07-17 17:57:38 +02:00
Petr Ledvina
baddf38dbc Make card filename const 
Fixes warning in filename_wldsd
 2018-07-17 17:55:05 +02:00
Petr Ledvina
3f92630fd1 Fix setTargetHotend array overflow 
Special function may be used instead (setTargetHotends(temp))
 2018-07-17 17:55:04 +02:00
PavelSindler
33f9af65c8 merge with upstream/MK3 2018-07-17 16:36:53 +02:00
XPila
7bec5c6d5c
Merge branch 'MK3' into MK3-new_lang 2018-07-17 11:47:01 +02:00
PavelSindler
77426b563a
Revert "Save 80B of flash and 8B of RAM and fix compiler warning:" 2018-07-17 11:28:44 +02:00
PavelSindler
85c37d1225
Merge branch 'MK3' into fix_compiler_warnings 2018-07-17 10:56:25 +02:00
PavelSindler
322978c920 Merge branch 'MK3_mk_prep' into MK3 2018-07-17 10:03:31 +02:00
PavelSindler
eb3307e8fc
Merge pull request #889 from mkbel/fix_PRUSA_RESET 
Do not skip bootloader when initiating reset by farm PRUSA RESET comm…
 2018-07-17 09:52:41 +02:00
Robert Pelnar
2451455974 LCD menu optimalization - initial lcd update fix 2018-07-16 23:54:46 +02:00
Robert Pelnar
19a72ef9eb LCD menu optimalization - LiquidCrystal_Prusa removed 2018-07-16 23:23:15 +02:00
Robert Pelnar
e22d204e8e LCD menu optimalization - print functions 
+removed unused code
 2018-07-16 19:29:27 +02:00
Robert Pelnar
68e59399af LCD menu optimalization - lcd_printPGM replaced with lcd_puts_P 2018-07-16 18:08:01 +02:00
Robert Pelnar
0eaabed50c LCD menu optimalization - renamed lcd_implementation clear 
+code order
 2018-07-16 17:54:16 +02:00
Robert Pelnar
0924ad50d5 New localization vs octoprint fix - do not translate protocol messages 2018-07-16 04:50:43 +02:00
Robert Pelnar
b6223d5623 LCD menu optimalization 2018-07-16 04:13:26 +02:00
Robert Pelnar
268d2634f0 LCD menu optimalization - lcd and menu 
removed unused code and conditional translation
 2018-07-16 02:13:52 +02:00
PavelSindler
0e15a4025b whitespace 2018-07-15 20:24:24 +02:00
PavelSindler
6824ab65dd G28 fix 2018-07-15 20:00:29 +02:00
Marek Bel
42893b7a94 Fix compiler warnings: 
sketch/Marlin_main.cpp:806:6: warning: unused variable 'cursor_pos' [-Wunused-variable]
sketch/Marlin_main.cpp:1922:7: warning: unused variable 'stack_integrity' [-Wunused-variable]
sketch/Marlin_main.cpp:4254:8: warning: unused variable 'clamped' [-Wunused-variable]
 2018-07-13 20:47:40 +02:00
Marek Bel
c251777590 Fix compiler warning: 
In file included from sketch/BlinkM.cpp:5:0:
sketch/Marlin.h:422:13: warning: 'void print_time_remaining_init()' declared 'static' but never defined [-Wunused-function]
 static void print_time_remaining_init();

Make local functions static. Saves 6B of flash.
 2018-07-13 18:44:54 +02:00
Robert Pelnar
7c78559b0e Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang 2018-07-12 18:27:06 +02:00
Marek Bel
2c00f065fd Fix error in recovering after power panic. (Function pointer was passed instead of function been called.) 
It manifested istself as following compiler warnings:
sketch/Marlin_main.cpp: In function 'void print_physical_coordinates()':
sketch/Marlin_main.cpp:9065:86: warning: pointer to a function used in arithmetic [-Wpointer-arith]
  printf_P(_N("physical coordinates: (%.3f, %.3f, %.3f)\n"), st_get_position_mm[X_AXIS], st_get_position_mm[Y_AXIS], st_get_position_mm[Z_AXIS]);
                                                                                      ^
sketch/Marlin_main.cpp:9065:114: warning: pointer to a function used in arithmetic [-Wpointer-arith]
  printf_P(_N("physical coordinates: (%.3f, %.3f, %.3f)\n"), st_get_position_mm[X_AXIS], st_get_position_mm[Y_AXIS], st_get_position_mm[Z_AXIS]);
                                                                                                                  ^
sketch/Marlin_main.cpp:9065:142: warning: pointer to a function used in arithmetic [-Wpointer-arith]
  printf_P(_N("physical coordinates: (%.3f, %.3f, %.3f)\n"), st_get_position_mm[X_AXIS], st_get_position_mm[Y_AXIS], st_get_position_mm[Z_AXIS]);
                                                                                                                                              ^
sketch/Marlin_main.cpp:9066:1: warning: pointer offset from symbol maybe incorrect [enabled by default]
 }
 ^
_Z18st_get_position_mmh+2
sketch/Marlin_main.cpp:9066:1: warning: pointer offset from symbol maybe incorrect [enabled by default]
_Z18st_get_position_mmh+2
sketch/Marlin_main.cpp:9066:1: warning: pointer offset from symbol maybe incorrect [enabled by default]
_Z18st_get_position_mmh+1
sketch/Marlin_main.cpp:9066:1: warning: pointer offset from symbol maybe incorrect [enabled by default]
_Z18st_get_position_mmh+1
 2018-07-12 18:06:07 +02:00
PavelSindler
07f6ddfb69 filament loading corrected 2018-07-11 22:34:32 +02:00
PavelSindler
9b7cc60b42 filament statistics hotfix, load filament move Z simplified 2018-07-11 21:59:43 +02:00
PavelSindler
11aa775322 move in Z before filament loading: intial version 2018-07-11 21:59:23 +02:00
PavelSindler
d18160cab5 splash screen 2018-07-11 21:58:06 +02:00
MRprusa3d
1357e27b55 FilamentAutoload setting by shipping preparation 2018-07-11 21:56:25 +02:00
MRprusa3d
d658bf56cf ShippingPrep Reset 
statistics reset by shipping preparation & filament sensor force
 2018-07-11 21:55:21 +02:00
MRprusa3d
4b295c4091 FilamentAutoload setting by shipping preparation 2018-07-11 20:45:56 +02:00
Robert Pelnar
066c044396 fixed tmc2130_wr_CHOPCONF 
backlash - initial implementation (disabled by default)
removed menu "W25x20CL init"
splashscreen displayed before entering optiboot
 2018-07-11 20:02:46 +02:00
MRprusa3d
d167b631fb ShippingPrep Reset 
statistics reset by shipping preparation & filament sensor force
 2018-07-11 18:52:58 +02:00
PavelSindler
1ad49dc5e9 first working version 2018-07-10 10:45:45 +02:00
PavelSindler
c7745dfb83
Merge pull request #908 from XPila/MK3-new_lang 
TMC2130 gcodes for live motor tunning:
 2018-07-09 16:58:09 +02:00
Robert Pelnar
771cead291 TMC2130 gcodes for live motor tunning: 
TMC_SET_WAVE_X..E (linearity correction)
TMC_SET_CHOP_X..E (chopper configuration - 4 args - toff, hstr, hend, tbl)
 2018-07-09 16:44:10 +02:00
PavelSindler
bde81de984 load and unload filament functions for snmm_v2 2018-07-09 15:24:59 +02:00
PavelSindler
928dcb1417 missing initialization fix 2018-07-09 14:45:59 +02:00
PavelSindler
5979bf5e0c T-codes for MMU_V2: initial version 2018-07-09 13:57:36 +02:00
Marek Bel
3248edc1ca Do not skip bootloader when initiating reset by farm PRUSA RESET command. 
Set bootloader magic and run flag before watchdog reset in PRUSA RESET command.
 2018-06-26 20:12:09 +02:00
PavelSindler
6f617696ac dummy "ok" reponse readded (fix for SD card print with Octoprint: fixes communication timeout issues) 2018-06-25 18:52:22 +02:00
XPila
20f98d487a
Merge pull request #872 from XPila/MK3 
Farm mode - tmc2130 extruder current setting fixed
 2018-06-25 17:45:58 +02:00
Robert Pelnar
fe9b4e5f1f Farm mode - tmc2130 extruder current setting fixed 2018-06-25 17:45:07 +02:00
PavelSindler
0fccf5a737
Merge pull request #870 from XPila/MK3 
Mk3
 2018-06-25 17:36:22 +02:00
PavelSindler
5d531b0f66 save extruder relative mode correctly 2018-06-25 17:30:20 +02:00
Robert Pelnar
12de2f95e6 Farm mode: PFW360, PFW361, PFW362, PFW363 2018-06-25 17:29:34 +02:00
Robert Pelnar
6d4c3b8b27 Farm mode - reset using watchdog for MK3 2018-06-25 16:04:47 +02:00
PavelSindler
49ad60f0ff
Merge pull request #851 from PavelSindler/confused_display 
set default printer message when recovering from crash detection
 2018-06-22 08:48:33 +02:00
PavelSindler
a83475bf7c whitespace 2018-06-21 22:18:10 +02:00
PavelSindler
7b81663883 crash detection/stop print erroneous movements hotfix 2018-06-21 22:16:45 +02:00
PavelSindler
ee1e8dfccc set default printer message when recovering from crash detection and at the end of mesh bed leveling 2018-06-20 17:58:31 +02:00
XPila
2be36f626f
Merge pull request #845 from PavelSindler/crash_movements 
crash detection fix for absolute E coordinates
 2018-06-19 18:46:39 +02:00
PavelSindler
650d8cc643
Merge pull request #844 from mkbel/add_farm_PRUSA_RESET 
Add PRUSA RESET command in farm mode.
 2018-06-19 18:44:00 +02:00
PavelSindler
1e60390545 dont process data from serial line if print is saved (crash detection and filament detection) 2018-06-19 16:51:22 +02:00
PavelSindler
209209459d Merge remote-tracking branch 'upstream/MK3' into crash_movements 2018-06-18 18:29:12 +02:00
Robert Pelnar
7619e94040 New ML support - checksum and signature 2018-06-15 20:37:33 +02:00
PavelSindler
ac1e089a7f crash detection fix for absolute E coordinates 2018-06-15 20:03:48 +02:00
Marek Bel
32165dedb0 Add PRUSA RESET command in farm mode. 2018-06-15 17:07:44 +02:00
mkbel
9ba49affc6
Merge pull request #835 from PavelSindler/safety_timer_gcode 
Safety timer gcode
 2018-06-14 20:49:25 +02:00
PavelSindler
ed2f87f4f5 documentation updated 2018-06-14 17:29:40 +02:00
bubnikv
eef6c68c9f Added support for a secondary boot loader, based on the OptiBoot project, 
modified to update the external flash memory on Einsy boards.
Due to a bug in the USB to serial converter firmware on the Prusa Einsy
boards, the STK500 protocol has been modified to never send semicolon
characters towards the main processor.

This firmware updater is compatible with a modified avrdude using
the "arduino" protocol, see the following commit.
https://github.com/prusa3d/Slic3r/tree/fwupdater_languages
 2018-06-14 15:13:21 +02:00
PavelSindler
2026e7fe4d Revert changes in Timer class; disable safety timer in handleSafetyTimer function if safetytimer inactive time was set to zero 2018-06-14 13:14:14 +02:00
PavelSindler
2a219143fe Merge remote-tracking branch 'upstream/MK3' into safety_timer_gcode 2018-06-14 13:09:15 +02:00
PavelSindler
c1425aece3 gcode: set safety timer period 2018-06-13 16:22:06 +02:00
PavelSindler
3ca7c82e08 power panic: restore dir names 2018-06-12 19:45:59 +02:00
PavelSindler
fb6f4c6c8f break 2018-06-12 15:06:11 +02:00
PavelSindler
0ab0519c01 power panic fix: short filenames 2018-06-12 14:35:25 +02:00
PavelSindler
db9c82acef M600 communication timeout fix 2018-06-11 20:28:18 +02:00
XPila
d6ccaa7c08
Merge pull request #830 from PavelSindler/crash_det_cool_hotend 
Crash detection: set nozzle target temp to zero when waiting for user
 2018-06-11 15:43:54 +02:00
XPila
5178675cdd
Merge pull request #829 from PavelSindler/temp_cal_fix2 
Home XYZ: first move Z higher to protect steel sheet/heatbed
 2018-06-11 15:42:59 +02:00
PavelSindler
2f5bb80e98 crash detection: turn off nozzle when waiting for user 2018-06-11 15:34:16 +02:00
PavelSindler
d4106c2fe3 If homing all axes, move Z little bit higher before X and Y movements to protect steel sheet/heatbed 2018-06-11 11:13:49 +02:00
Robert Pelnar
0cf7d12ae3 New ML support - lcd optimalization 
lcd_puts_P and lcd_printf_P functions
LineFeed implemented in LiquidCrystal_Prusa
 2018-06-10 22:06:00 +02:00
Robert Pelnar
0f75bcb442 New ML support - flash usage optimalization 
used flash space 252826bytes (MK3 + ML support), free ~1kbyte
 2018-06-10 20:44:36 +02:00
Robert Pelnar
c25fec9f0a New ML support 
printf float library enabled - platform.txt must be modified!
+flash usage optimalization - printing to serial line
current flash usage: 253206bytes (MK3 + ML support)

platform.txt original line 20:
compiler.c.elf.flags=-w -Os -Wl,--gc-sections

platform.txt modified line 20 (enable printf float library)
compiler.c.elf.flags=-w -Os -Wl,-u,vfprintf -lprintf_flt -lm -Wl,--gc-sections
 2018-06-10 20:04:25 +02:00
Robert Pelnar
a1ea5019dc Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang 2018-06-10 16:29:29 +02:00
Robert Pelnar
076258ff99 New ML support - cond.trans. for LANG_MODE 0 2018-06-10 16:28:15 +02:00
Robert Pelnar
4567d2feca removed unused cond. trans. for NEW_SPI 2018-06-10 16:11:39 +02:00
Robert Pelnar
fcfb4cdcae New ML support - menu tunning, startup 
+config headers (bool - true/false replaced with 0/1)
+fixed include hierarchy
+removed comments
 2018-06-10 16:04:32 +02:00
Robert Pelnar
f098707021 New ML support - W25X20CL - update process UI tunning 2018-06-10 00:22:28 +02:00
Robert Pelnar
5de0a6437d New ML support - W25X20CL - lang switching 
+removed unused code
 2018-06-09 23:49:26 +02:00
Robert Pelnar
dcd58d002c New ML support - W25X20CL 
language selection from menu is working
 2018-06-09 19:16:36 +02:00
Robert Pelnar
a9446cc6b3 New ML support - W25x20CL 2018-06-09 18:26:53 +02:00
Robert Pelnar
ebd8375313 New ML support - external flash W25X20CL - upgrade is working!!! (hardcoded to german) 
+print test (LT_PRINT_TEST)
 2018-06-09 17:49:41 +02:00
Robert Pelnar
c0946d8f04 New ML support - w25x20cl spi external flash support 
+fixed some messages
+sec lang update test
 2018-06-09 01:23:04 +02:00
XPila
31357379ff
Merge branch 'MK3' into time_remaining 2018-06-08 18:31:32 +02:00
XPila
8963757c3c
Merge branch 'MK3' into crash_detection_stop 2018-06-08 18:28:43 +02:00
PavelSindler
5e120e6e52 power panic flow factor hotfix 2018-06-08 18:13:50 +02:00
PavelSindler
332a23bef5 Crash detection stops and waits for user if it fails multiple times in short time frame 2018-06-08 16:08:07 +02:00
XPila
739de5224e
Merge branch 'MK3' into MK3-new_lang 2018-06-08 14:38:00 +02:00