3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,257 Commits 1 Branch 1 Tag 249 MiB
b551852392
Commit Graph

1945 Commits

Author SHA1 Message Date
Alessandro Ranellucci
28f8083ab7 Merge branch 'master' into xs 2013-07-06 11:38:40 +02:00
Alessandro Ranellucci
f455ecb7da Rename adjust_overhang_flow to overhangs 2013-07-06 11:35:40 +02:00
Alessandro Ranellucci
606d856af8 Lower case option group titles 2013-07-06 02:46:09 +02:00
Alessandro Ranellucci
b857d79604 Move spiral_vase to vertical shells section 2013-07-05 22:23:45 +02:00
Alessandro Ranellucci
f8ae8d3e8d New option to disable overhang flow 2013-07-05 22:12:58 +02:00
Alessandro Ranellucci
282c751b0f New option for disabling thin wall detection 2013-07-05 22:10:43 +02:00
Alessandro Ranellucci
0a7e0ffecf New options: start_perimeters_at_concave_points start_perimeters_at_non_overhang 2013-07-05 22:06:58 +02:00
Alessandro Ranellucci
362232ada4 New Quality section in GUI 2013-07-05 21:57:56 +02:00
Alessandro Ranellucci
f0440bede4 Move infill_every_layers infill_only_where_needed into their own "Reducing Printing Time" section 2013-07-05 21:55:01 +02:00
Alessandro Ranellucci
eb2d20d062 Merge branch 'master' into xs 2013-07-05 17:29:28 +02:00
Alessandro Ranellucci
339c487077 Fix starting point after overhang clipping is performed 2013-07-05 17:25:56 +02:00
Alessandro Ranellucci
b3b2a1e891 One more fix in overhang starting point detection 2013-07-05 17:08:26 +02:00
Alessandro Ranellucci
df4612a209 Prefer starting points that are NOT in overhangs 2013-07-05 17:00:14 +02:00
Alessandro Ranellucci
d074b98aba Optimization: don't store wipe path if wipe is not requested 2013-07-05 15:03:08 +02:00
Alessandro Ranellucci
be4eb3762f Use dclone() in Point class too 2013-07-05 14:48:03 +02:00
Alessandro Ranellucci
72f77a3420 Use dclone() in Polyline and ExPolygon too 2013-07-05 14:46:32 +02:00
Alessandro Ranellucci
8061cc6e30 Optimization in Polyline instantiation 2013-07-05 14:44:41 +02:00
Alessandro Ranellucci
27c421c27f Slight optimization 2013-07-05 14:21:20 +02:00
Alessandro Ranellucci
b266d6217a Skip slow gap detection if we aren't going to fill gaps anyway 2013-07-05 14:17:54 +02:00
Alessandro Ranellucci
4d46ebc6cb Removed useless, slow, code 2013-07-05 14:17:09 +02:00
Alessandro Ranellucci
f26f084064 New freeze.t test 2013-07-03 15:42:01 +02:00
Alessandro Ranellucci
bb656ea72c Merge branch 'master' into xs 2013-07-03 10:52:13 +02:00
Alessandro Ranellucci
71057b54a9 Allow negative values in validation... 2013-07-03 10:51:44 +02:00
Alessandro Ranellucci
63ba894260 Add some comments to OpenGL code 2013-07-01 12:23:44 +02:00
Alessandro Ranellucci
8ec3ec6bda Cosmetic changes to the new OpenGL code by iXce 2013-07-01 10:58:30 +02:00
Alessandro Ranellucci
dcc2b7f4ff Enable PreviewCanvas 2013-07-01 01:51:11 +02:00
Alessandro Ranellucci
7c4b1bc736 Merge pull request #1283 from iXce/master 
Panning/rotation/zooming support for 3D viewer
 2013-06-30 16:50:16 -07:00
Guillaume Seguin
b2e0c1ab42 Use max of all dimensions instead of max of first 2 2013-07-01 00:08:02 +02:00
Guillaume Seguin
1f229f3233 Cleanup 2013-06-30 23:54:13 +02:00
Guillaume Seguin
e92fefb6ff Working rotation for mesh viewer 2013-06-30 23:51:06 +02:00
Alessandro Ranellucci
1b6a9c0c3b Added validation on all settings. #611 2013-06-30 15:39:03 +02:00
Guillaume Seguin
6668a81c64 Start work on rotation handling 2013-06-29 18:31:06 +02:00
Guillaume Seguin
dd7830b1b7 Add panning support 2013-06-29 15:12:57 +02:00
Guillaume Seguin
43d764feff Implement zoom to point 2013-06-29 14:16:56 +02:00
Guillaume Seguin
317c911c67 Remove leftover from 47b2c13c 2013-06-29 14:16:38 +02:00
Guillaume Seguin
bb3ebb0244 Switch to orthographic projection 2013-06-29 10:43:35 +02:00
Guillaume Seguin
47b2c13c99 Get rid of demo timer in PreviewCanvas 2013-06-29 10:43:21 +02:00
Alessandro Ranellucci
1f50d9c7e8 https -> http in manual URL 2013-06-24 20:38:20 +02:00
Alessandro Ranellucci
5975145426 Automatically repair any input STL file 2013-06-24 20:34:57 +02:00
Alessandro Ranellucci
ecdc2f077b Merge branch 'master' into xs 
Conflicts:
	Build.PL
 2013-06-24 19:37:07 +02:00
Alessandro Ranellucci
f29faf0548 New Slic3r::TriangleMesh::XS class 2013-06-24 19:35:49 +02:00
Alessandro Ranellucci
f5cc446853 Menu item for launching the manual 2013-06-24 18:07:33 +02:00
Alessandro Ranellucci
a15884dac9 Remove useless algorithm in loop merging code 2013-06-24 00:08:39 +02:00
Alessandro Ranellucci
3622193c3f Rewrite the algorithm that closes loops in order. We now tolerate the case when more than two facets share a common edge 2013-06-24 00:02:01 +02:00
Alessandro Ranellucci
86c4f5c5b0 Merge branch 'master' into newslice 2013-06-23 22:23:25 +02:00
Alessandro Ranellucci
de45b823e1 Merge branch 'master' into xs 2013-06-23 21:12:19 +02:00
Alessandro Ranellucci
2a2633da0a New automatic built-in STL repair 2013-06-23 21:11:46 +02:00
Alessandro Ranellucci
625a300822 New [layer_num] placeholder in layer change G-code 2013-06-23 19:25:32 +02:00
Alessandro Ranellucci
8ea4ed3b5e Allow to supply custom G-code via command line if file is not found 2013-06-23 19:25:02 +02:00
Alessandro Ranellucci
2d687cd0a0 Only combine internal infill and leave internal-solid as it is. #1248 2013-06-23 18:21:47 +02:00
Alessandro Ranellucci
f3a9d41c70 Cache a Z table for layer range search 2013-06-23 17:07:12 +02:00
Alessandro Ranellucci
37105e8237 Ported get_layer_range() to C 2013-06-23 15:33:07 +02:00
Alessandro Ranellucci
9a904dc88d Lighter implementation of the slicing algorithm to save memory and time 2013-06-23 12:26:40 +02:00
Alessandro Ranellucci
cd1a39397b Optimize concentric loops 2013-06-23 00:50:44 +02:00
Alessandro Ranellucci
78f1527ab7 Compensate perimeter/infill overlap for concentric infill 2013-06-23 00:37:04 +02:00
Alessandro Ranellucci
5c7b447f07 Ensure there's no numerical error when searching for concave points 2013-06-23 00:21:19 +02:00
Alessandro Ranellucci
1e3ce9b8c4 Complete retraction if the wipe path was too short for the full retract. #1264 2013-06-23 00:10:57 +02:00
Alessandro Ranellucci
c03f9f0197 Fixed regression causing wrong direction for inwards move in holes. Includes regression test. #1265 2013-06-23 00:05:08 +02:00
Alessandro Ranellucci
0bd3d958e2 More optimizations in slice_facet() 2013-06-22 20:48:56 +02:00
Alessandro Ranellucci
1565560b55 One more little optimization 2013-06-22 20:37:15 +02:00
Alessandro Ranellucci
db266cde9f Little optimizations in slicing 2013-06-22 20:32:39 +02:00
Alessandro Ranellucci
398e66572d Optimization: remove overkill sort 2013-06-22 19:59:27 +02:00
Alessandro Ranellucci
82fbdb603f Optimization: cache model bounding box 2013-06-22 19:36:50 +02:00
Alessandro Ranellucci
4774b0e910 Be tolerant with STL files without the "normal" word 2013-06-22 16:15:07 +02:00
Alessandro Ranellucci
64a21276e3 Add regression test for concave starting points. #135 2013-06-22 15:22:58 +02:00
Alessandro Ranellucci
b35e668ee7 Require Boost::Geometry::Utils 0.15 2013-06-21 19:46:45 +02:00
Alessandro Ranellucci
aba7641fe4 Avoid starting loops on convex vertices and/or overhangs. #296 #135 2013-06-21 19:43:15 +02:00
Alessandro Ranellucci
90d8da0e0d Limit fan speed to 100% :-) 2013-06-21 16:08:16 +02:00
Alessandro Ranellucci
19b40baf55 Add regression test to ensure fan is enabled when printing overhangs. #432 2013-06-21 15:38:58 +02:00
Alessandro Ranellucci
c707073a73 Some fixes about overhang detection. Includes regression tests 2013-06-21 14:52:35 +02:00
Alessandro Ranellucci
f5322596d9 Note to self in code 2013-06-20 20:16:15 +02:00
Alessandro Ranellucci
7e875393f5 New algorithm for overhang detection 2013-06-20 20:11:46 +02:00
Alessandro Ranellucci
015580629b Removed wrong optimization causing possible extra retractions while moving in infill space 2013-06-20 19:43:53 +02:00
Alessandro Ranellucci
4474595629 Removed useless code 2013-06-20 19:21:35 +02:00
Alessandro Ranellucci
b414c50b68 Optimization: use Boost.Geometry for point in polygon 2013-06-20 18:48:11 +02:00
Alessandro Ranellucci
f7be746599 Disable overhang detection for now 2013-06-19 20:09:58 +02:00
Alessandro Ranellucci
fcd4de00e5 One more fix for --complete-objects working on single-object plates 2013-06-19 18:01:24 +02:00
Alessandro Ranellucci
5843f5df6c Fix regression in --complete-objects causing fatal error and/or wrong warnings about object heights 2013-06-19 17:34:37 +02:00
Alessandro Ranellucci
b71bc37111 Remove a couple cases of dangerous aliasing, causing crashes. #1257 2013-06-17 19:27:08 +02:00
Alessandro Ranellucci
799aeedd97 Fixed wrong refactoring in ac4a0bcdd8 2013-06-17 13:32:53 +02:00
Alessandro Ranellucci
c4036470af Fix one thing leftover from bounding box refactoring 2013-06-17 12:11:28 +02:00
Alessandro Ranellucci
c6ef81fb91 Modify overhang detection algorithm 2013-06-16 18:08:17 +02:00
Alessandro Ranellucci
45611d6742 Fix connection algorithm for rectilinear infill as sometimes it wasn't connecting segments correctly 2013-06-16 18:05:56 +02:00
Alessandro Ranellucci
0ad78eaf55 Return explicit 0 from have_version_check() to avoid wxMenuItem->Enable errors 2013-06-16 16:07:47 +02:00
Alessandro Ranellucci
3bcf1da702 Disable avoid_crossing_perimeters optimization until we can detect nested shells. #1254 2013-06-16 16:04:19 +02:00
Alessandro Ranellucci
32aafd2eb9 Temporary workaround until Boost::Geometry::Utils 0.14 is available 2013-06-16 15:11:39 +02:00
Alessandro Ranellucci
258842b845 New logic for connecting honeycomb loops 2013-06-16 13:31:10 +02:00
Alessandro Ranellucci
9ff85898b1 New logic for connecting honeycomb paths 2013-06-16 13:26:57 +02:00
Alessandro Ranellucci
961586fe8f Rewrite honeycomb infill so that it only generates the pattern for the bounding box of the region instead of the full print, so reduce complexity of the clipping routine 2013-06-16 13:13:52 +02:00
Alessandro Ranellucci
ac4a0bcdd8 Refactoring: use Slic3r::Geometry::BoundingBox objects everywhere 2013-06-16 12:21:25 +02:00
Alessandro Ranellucci
07407e5dbd Merge branch 'master' into overhang 
Conflicts:
	lib/Slic3r/GCode.pm
 2013-06-16 10:49:33 +02:00
Alessandro Ranellucci
2993a1659e Bump version number 2013-06-16 10:22:22 +02:00
Alessandro Ranellucci
d0eac88ff9 Reduce vibrations when doing gap fill 2013-06-15 21:27:36 +02:00
Alessandro Ranellucci
8b48d79563 Improve zigzag gap fill. #1234 2013-06-15 21:10:04 +02:00
Alessandro Ranellucci
cb75b1e47b Fix plater crash on threaded perls 2013-06-15 19:15:24 +02:00
Alessandro Ranellucci
8d9d023dd7 Merge branch 'honeycomb-clipping' 2013-06-15 18:10:16 +02:00
Alessandro Ranellucci
20158aac0d Merge branch 'issue1161' 2013-06-15 18:08:01 +02:00
Alessandro Ranellucci
7560d5f131 Merge branch 'perl-518' 2013-06-15 18:06:36 +02:00
Alessandro Ranellucci
8b6afb61d9 Fix little error in tests 2013-06-15 17:17:48 +02:00
Alessandro Ranellucci
7bf308c08f Fix one more centering problem caused by wrong bounding box implementation 2013-06-15 15:50:02 +02:00
Alessandro Ranellucci
a8981b8b35 Bugfix: infill was clipped badly. Includes regression test. #1245 2013-06-15 12:10:57 +02:00
Alessandro Ranellucci
5fa49aad02 Releasing 0.9.10 2013-06-14 16:59:20 +02:00
Alessandro Ranellucci
878d17605c Ignore solid_infill_every_layers when fill_density is 0. Includes regression test. #1240 2013-06-14 16:48:24 +02:00
Alessandro Ranellucci
145fe08203 More fixes for plater positioning. #1171 2013-06-13 20:05:32 +02:00
Alessandro Ranellucci
962a51cc80 Some cleanup for the plater code 2013-06-13 14:33:10 +02:00
Alessandro Ranellucci
def013ba91 Use _transform_thumbnail when rescaling thumbnails 2013-06-13 11:28:27 +02:00
Alessandro Ranellucci
0a74e45432 Scale and recenter thumbnails when bed size and/or print center is changed 2013-06-13 11:27:15 +02:00
Alessandro Ranellucci
5dcf277563 Rotate cw when using free rotation button to be consistent with icon. #1171 2013-06-13 10:27:47 +02:00
Alessandro Ranellucci
aee7b70d79 Bugfix: the order of transformations was not consistent in plater and actual G-code generation. #1171 #1191 2013-06-12 16:53:19 +02:00
Alessandro Ranellucci
8e0e03247d Bugfix: ineffective scale() method in recently created BoundingBox objects caused wrong positioning for scaled objects in plater. Includes regression test. #1171 2013-06-10 15:34:45 +02:00
Alessandro Ranellucci
8b2c13cc6f Regression test for top solid surfaces in V-shaped object. #1161 2013-06-08 20:01:26 +02:00
Alessandro Ranellucci
d5a9320587 Bugfix: narrow top surfaces didn't generate solid layers. #1161 2013-06-08 17:48:34 +02:00
Alessandro Ranellucci
b12a09ed71 Rename makerbot G-code flavor to makerware; also mention Repetier among RepRap firmwares. #1034 2013-06-07 23:24:53 +02:00
Alessandro Ranellucci
510c2092df Fix rotation and scaling in plater producing mispositioned objects in G-code after recent changes. Includes a large refactoring and the new Slic3r::Geometry::BoundingBox class. #1171 #1191 2013-06-07 23:16:02 +02:00
Alessandro Ranellucci
9ea55497c2 Prevent crash when user deleted object from plater before thumbnail was generated in the other thread. #1207 2013-06-07 13:54:40 +02:00
Alessandro Ranellucci
f991e3bc10 Fixed SVG export and added regression test 2013-06-07 12:00:03 +02:00
Alessandro Ranellucci
fcc442882c Fix plater defect causing misalignment 2013-06-06 20:53:56 +02:00
Alessandro Ranellucci
43814e99f6 Remove smart match and lexical $_ for compatibility with perl 5.18. #1216 2013-06-06 10:46:58 +02:00
Alessandro Ranellucci
8c40cefe1e Also use G1 when traveling with avoid_crossing_perimeters enabled 2013-06-05 17:12:34 +02:00
Alessandro Ranellucci
532ae53d0b Use G1 instead of G0 for restart after retraction to avoid blending with the previous travel move. #1212 2013-06-05 16:58:30 +02:00
Alessandro Ranellucci
b3f1795cb4 Reduce wipe feedrate a bit 2013-06-03 22:49:47 +02:00
Alessandro Ranellucci
8b3aa32a7e Update tooltip for only_retract_when_crossing_perimeters 2013-06-03 22:40:29 +02:00
Alessandro Ranellucci
230367b383 Order objects using a nearest neighbor search instead of relying on the order in plater. #1184 2013-06-03 21:54:55 +02:00
Alessandro Ranellucci
3ffe98f0c3 Use actual Z to order objects in sequential printing rather than layer count, as layer heights might be different 2013-06-03 21:40:13 +02:00
Alessandro Ranellucci
09b81ad027 Fix typo causing regression in island ordering. #1211 2013-06-03 21:27:09 +02:00
Alessandro Ranellucci
c95245f143 Some G-code flavor logic simplification 2013-06-03 18:01:14 +02:00
Alessandro Ranellucci
167ec7a4e7 Use M135 for makerbot toolchange; also disable any G90 and G21 command. #1034 2013-06-03 16:21:22 +02:00
Alessandro Ranellucci
974379c955 Add M103 after retraction and M101 before restart when Makerbot G-code flavor is selected. #1119 2013-06-03 15:37:32 +02:00
Alessandro Ranellucci
71608e799e Keep per-extruder E absolute value for Makerbot flavour to avoid any G92 E0. #950 2013-06-03 15:27:58 +02:00
Alessandro Ranellucci
48d5d6de58 Typo 2013-06-03 12:29:45 +02:00
Alessandro Ranellucci
81bae56e92 Limit only_retract_when_crossing_perimeters to travel moves that are completely enclosed in the upper layer's slices so that we avoid visible traces on top layers. #1091 2013-06-03 12:25:32 +02:00
Alessandro Ranellucci
7134df4638 Only skip objects with no layers without stopping the whole job 2013-06-03 11:39:23 +02:00
Alessandro Ranellucci
8c74d2f41e New --autosave option for better toolchain integration. #837 2013-06-02 20:03:22 +02:00
Alessandro Ranellucci
895e0bbfcd Include M82/M83 for Teacup too. #1206 2013-06-02 19:58:29 +02:00
Alessandro Ranellucci
6bb2e593a7 Avoid potential fatal error when processing models with empty layers. #1127 2013-06-02 19:49:21 +02:00
Alessandro Ranellucci
8a01cb9e96 Generate a better error when input file is too thin and no layers could be generated. #1127 2013-06-02 19:44:59 +02:00
Alessandro Ranellucci
086ec4af9c Fixed yet one more regression in Quick Slice caused by recent Model refactoring. #1208 2013-06-02 19:32:53 +02:00
Alessandro Ranellucci
28a01e7c5e Fix past participle 2013-06-02 16:58:23 +02:00
Alessandro Ranellucci
655d528d92 Fixed recent regression causing a spike when avoid_crossing_perimeters was used on split objects 2013-06-02 16:56:08 +02:00
Alessandro Ranellucci
da36df65a4 Warning removed when exporting config 2013-06-02 11:15:57 +02:00
Alessandro Ranellucci
30ce7dc745 Bugfix: wizard crashing in Simple Mode. #1077 #1122 2013-06-01 18:56:23 +02:00
Alessandro Ranellucci
d801876ee9 Revert "Bugfix: configuration wizard crash 2 #1077" 
This reverts commit 55c413627f.
 2013-06-01 18:54:07 +02:00
Alessandro Ranellucci
973d30a2b4 Merge pull request #1148 from hroncok/patch-1 
Bugfix: configuration wizard crash 2 #1077
 2013-06-01 09:46:17 -07:00
Alessandro Ranellucci
49531f6f78 Fixed regression causing rotation from plater to also translate the resulting G-code. #1191 2013-05-31 19:41:31 +02:00
Alessandro Ranellucci
c62b49d1af Optimization of extra perimeters detection 2013-05-31 14:30:07 +02:00
Alessandro Ranellucci
917915d68e Bugfix: superfluous extra perimeters were generated. #1170 2013-05-31 14:23:42 +02:00
Alessandro Ranellucci
5f06cea821 Prevent --extrusion-multiplier <= 0. #1183 2013-05-31 12:45:18 +02:00
Alessandro Ranellucci
5c7dd2cf78 Some fixes to the cooling logic and new test suite for cooling 2013-05-31 12:18:33 +02:00
Alessandro Ranellucci
da76496988 Store config in Slic3r::GCode object 2013-05-31 11:19:36 +02:00
Alessandro Ranellucci
7baaf6bf5d Fixed regression causing skirt_height to he honored incorrectly when printing more than one object. Includes regression test #1200 2013-05-30 20:06:05 +02:00
Alessandro Ranellucci
8f5a958948 Rename do_slice() to quick_slice() 2013-05-20 11:02:12 +02:00
Alessandro Ranellucci
71d6f428ca Apparent fix for "Attempt to free unreferenced scalar" 2013-05-20 10:57:27 +02:00
Alessandro Ranellucci
c43ef45064 Require the newest Math::Clipper and Boost::Geometry::Utils to avoid the huge memory leaks present in previous versions 2013-05-20 09:56:55 +02:00
Alessandro Ranellucci
f13d4e4e66 Restore skirt preview and extrude clearance after recent usage of int_offset() 2013-05-19 18:03:18 +02:00
Alessandro Ranellucci
5494f4f385 Free @_ before spawning a new thread (known old Perl bug) as an attempt to fix the unref scalars error 2013-05-19 17:34:33 +02:00
Alessandro Ranellucci
48e37f97b4 Fixed bad copy and paste causing multiple extruders to throw an error 2013-05-19 15:33:54 +02:00
Alessandro Ranellucci
bbb190dc68 Generate infill using each object's bounding_box instead of full print. #1177 2013-05-19 11:35:41 +02:00
Alessandro Ranellucci
627debf284 Scale bounding_box by sqrt(2) in honeycomb too to ensure it will cover the object even after rotation, like we already did for Rectilinear 2013-05-19 11:25:41 +02:00
Alessandro Ranellucci
b5b0c2cc89 Bad copy and paste in commit from yesterday causing loss of perimeters. #1178 2013-05-19 10:47:00 +02:00
Alessandro Ranellucci
7180e7cb30 Speed optimization in avoid_crossing_perimeters 2013-05-19 10:35:11 +02:00
Alessandro Ranellucci
f599ed00c6 Avoid closures, move planning code to _plan() and layer G-code generation to Slic3r::GCode::Layer 2013-05-18 17:41:37 +02:00
Alessandro Ranellucci
08a0bbd7f0 Optimization: split meshes automatically when avoid_crossing_perimeters is enabled, so that we reduce the complexity of the MotionPlanner graphs. This commit includes a very large refactoring of the Model class which is now responsible for duplication and arrangement 2013-05-18 16:48:26 +02:00
Alessandro Ranellucci
e33ca54943 Some code cleanup in MotionPlanner 2013-05-17 20:03:38 +02:00
Alessandro Ranellucci
ba433822b6 Disable OpenGL code in master branch for now 2013-05-17 15:44:23 +02:00
Alessandro Ranellucci
8f77d3b945 Increase spacing for bridge traces. #1090 2013-05-17 15:03:42 +02:00
Alessandro Ranellucci
8e2063397a Merge branch 'opengl' 2013-05-17 14:17:02 +02:00
Alessandro Ranellucci
5c74fd095b Very basic implementation of 3D preview - install Wx::GLCanvas to get it working 2013-05-17 14:14:33 +02:00
Alessandro Ranellucci
61c1045331 Merge branch 'master' into overhang 2013-05-16 18:36:11 +02:00
Alessandro Ranellucci
228c84ddc1 Use glDrawArrays() 2013-05-16 13:42:19 +02:00
Alessandro Ranellucci
09989ab8bd Fix regression in --gcode-arcs 2013-05-16 12:54:38 +02:00
Alessandro Ranellucci
521d668712 Reduce overlap for bridges. #1090 2013-05-16 12:34:24 +02:00
Alessandro Ranellucci
55071e544f Fix brim spacing. #1174 2013-05-16 12:29:46 +02:00
Alessandro Ranellucci
fc1a23f5b0 Quick and dirty OpenGL mockup 2013-05-16 12:09:01 +02:00
Alessandro Ranellucci
bff31d7002 Fix split_mesh() not working anymore since analyze() is lazy 2013-05-16 11:25:15 +02:00
Alessandro Ranellucci
a94d26b1ce Fix overhang detection for contours 2013-05-15 10:50:38 +02:00
Alessandro Ranellucci
575127151b New algorithm for overhang detection 2013-05-14 20:19:42 +02:00
Alessandro Ranellucci
90280fe63b Little fix for bridge rendering in SectionCut 2013-05-14 20:11:05 +02:00
Alessandro Ranellucci
967d567db0 Fix bridge rendering in SectionCut 2013-05-14 19:48:52 +02:00
Alessandro Ranellucci
632652d924 Unfinished work for displaying bridge paths in section cuts 2013-05-14 19:48:47 +02:00
Alessandro Ranellucci
06ad6b70f8 Bugfix: scaling object from the plater applied scale factor over the factor used in the previous slicing job. #1075 2013-05-14 16:31:50 +02:00
Alessandro Ranellucci
7eff002e21 Memory and speed optimization: only study meshes when needed 2013-05-14 14:47:00 +02:00
Alessandro Ranellucci
e51dbb994d One more speed optimization in STL.pm 2013-05-14 14:17:46 +02:00
Alessandro Ranellucci
745cea8e6c One more little speed optimization in STL.pm 2013-05-14 14:12:32 +02:00
Alessandro Ranellucci
25bafe7ff1 Memory (and maybe speed?) optimization in STL reader 2013-05-14 13:54:25 +02:00
Alessandro Ranellucci
4121a7ece5 Set support material enforce layers to 0 when spiral printing 2013-05-14 13:54:24 +02:00
Mark Hindess
7979dd9e9c Avoid expensive TriangleMesh BUILD method during clone. 
Gives 6% speedup and uses less memory when slicing yoda.stl and should
give significantly bigger speedup on more complex models and plates.
 2013-05-13 21:27:55 +01:00
Alessandro Ranellucci
a86c48d85c Disable retract on layer change when doing spiral vase; also check that we're printing a single-material object 2013-05-13 21:55:34 +02:00
Alessandro Ranellucci
a73020c10e Faster implementation of concentric infill, with loop order reversed so that smaller loops will be printed at the end. #898 2013-05-13 21:22:57 +02:00
Alessandro Ranellucci
ccdb29ddc9 New --spiral-vase option to continously raise Z when printing single-walled vases. #997 2013-05-13 20:15:45 +02:00
Alessandro Ranellucci
baa1a8c736 Move Slic3r::Test::GCodeReader to Slic3r::GCode::Reader 2013-05-13 20:14:33 +02:00
Alessandro Ranellucci
ece6dd8a0b Only make the inwards move when we have more than one perimeter 2013-05-13 19:35:42 +02:00
Alessandro Ranellucci
7c89476602 Move fan_always_on in the Enable options group. #1166 2013-05-13 18:33:44 +02:00
Alessandro Ranellucci
1aae311148 Fix menus for --no-plater. #1112 2013-05-13 18:30:12 +02:00
Alessandro Ranellucci
f6dc712158 Bugfix: most of the File menu items didn't work with --no-plater. #1112 2013-05-13 18:22:47 +02:00
Alessandro Ranellucci
d2425748a3 Code cleanup and remove arc compensation code 2013-05-13 13:18:58 +02:00
Alessandro Ranellucci
5efa409c7c Move gap fill to its own method 2013-05-13 13:07:22 +02:00
Alessandro Ranellucci
1d94618c5e Correctly detect external hole perimeters 2013-05-13 12:52:57 +02:00
Alessandro Ranellucci
ca549cd2fe Perimeters refactoring complete 2013-05-11 21:30:26 +02:00
Alessandro Ranellucci
67b24efd49 Incomplete work - still wrong order 2013-05-11 21:05:29 +02:00
Alessandro Ranellucci
df62c25c8f One more offset_ex() optimization 2013-05-11 09:39:38 +02:00
Alessandro Ranellucci
0e100827f8 Avoid useless looping and usage of ExPolygons 2013-05-11 09:35:33 +02:00
Alessandro Ranellucci
6e216e2fd9 New traverse_pt() 2013-05-11 09:24:48 +02:00
Alessandro Ranellucci
7953dcfb12 Merge branch 'better-brim' 
Conflicts:
	lib/Slic3r/Geometry/Clipper.pm
	lib/Slic3r/Print.pm
 2013-05-11 09:19:23 +02:00
Alessandro Ranellucci
bac5093de4 Alwyas apply disable_fan_first_layers, even if cooling is disabled, since fan_always_on is applied in that case as well. Update descriptive text and have it appear in case of disabled auto cooling. #1166 2013-05-10 15:09:27 +02:00
Alessandro Ranellucci
6b8894cf9a Rename ex_int_offset2 to offset2_ex 2013-05-10 13:56:29 +02:00
Alessandro Ranellucci
993fcd9182 Revert "Smarter ordering of brim loops. #687" until new Math::Clipper is out 
This reverts commit 4aad2f6243.
 2013-05-10 13:51:28 +02:00
Alessandro Ranellucci
5bf3f5f5e4 Make sure brim paths don't overlap 2013-05-10 13:47:40 +02:00
Alessandro Ranellucci
4aad2f6243 Smarter ordering of brim loops. #687 2013-05-09 14:52:56 +02:00
Alessandro Ranellucci
855ba90332 New script to generate vertical section cuts from any given G-code file 2013-05-02 11:42:51 +02:00
Alessandro Ranellucci
dde3e6e870 Disable Net::DBus. #1015 2013-04-29 15:57:07 +02:00
Alessandro Ranellucci
c2301c5796 Don't extend solid layers when fill density is 0 2013-04-29 15:55:50 +02:00
Alessandro Ranellucci
f7153d67d0 Make preset placeholders available in Quick Slice too. #921 2013-04-28 23:26:50 +02:00
Alessandro Ranellucci
bde730a611 Little fix in SectionCut.pm 2013-04-28 11:31:03 +02:00
Alessandro Ranellucci
6db8afe36d New option to remember last output directory. #698 2013-04-27 21:07:30 +02:00
Alessandro Ranellucci
f5bda326b8 Version check. #1006 2013-04-27 20:55:43 +02:00
Alessandro Ranellucci
bc9ff47d3f New module to output SVG vertical sections of extrusion paths with real width and height. The commit includes a bugfix to the Polyline->grow() method and some simplification in the Line class which is now child of Polyline 2013-04-27 15:02:13 +02:00
Alessandro Ranellucci
6842114d3d Fix for rectilinear infill failing in plates with new caching 2013-04-26 17:14:30 +02:00
Alessandro Ranellucci
24fd152ce4 Bugfix: cooling buffer was broken. #1149 2013-04-24 11:19:08 +02:00
Miro Hrončok
55c413627f Bugfix: configuration wizard crash 2 #1077 2013-04-23 16:17:43 +03:00
Mark Hindess
8c26f0da30 Avoid memory leaks by breaking reference cycle: Print -> Fill -> Print 2013-04-18 22:49:43 +01:00
Mark Hindess
aac2c45450 Avoid merging meshes when there is only one mesh to merge. 
When slicing yoda.stl it reduces peak memory usage by 5% and speeds up
slicing by 13%.
Further optimization using a simple proxy to implement the two methods
(size/extends) needed on the merge meshes is also possible and
undoubtedly worthwhile.
 2013-04-18 19:50:05 +01:00
Mark Hindess
407de02fe4 Use binary search for get_layer_range. 
Gives a 13% speed up on Teethy_Tiki.stl (thing:49334) with default settings
on my laptop.
When $self->layers->[0]->slice_z == $min_z the returned $min_layer value is
0 rather than the (incorrect?) -1 returned by the old code.
 2013-04-18 19:29:05 +01:00
Alessandro Ranellucci
4e6c58f749 TYpo 2013-04-18 19:49:02 +02:00
Alessandro Ranellucci
17f76c4951 Move bridge detection to its own method 2013-04-18 18:43:46 +02:00
Alessandro Ranellucci
e088d9b3f7 Cache Slic3r::Fill object 2013-04-18 18:40:59 +02:00
Alessandro Ranellucci
312bb285a0 Fix initialization of Rectilinear filler 2013-04-18 18:37:46 +02:00
Alessandro Ranellucci
c46bfc71b4 Merge branch 'master' into boost-optimizations 2013-04-18 17:48:46 +02:00
Alessandro Ranellucci
01bd9040f5 Fix syntax for ex_int_offset2() 2013-04-18 17:46:13 +02:00
Alessandro Ranellucci
b160feacfd Merge branch 'master' into clipper-optimizations 2013-04-18 17:36:42 +02:00
Alessandro Ranellucci
850690cf79 Minor optimization 2013-04-18 17:36:06 +02:00
Alessandro Ranellucci
430c825918 Align rectilinear and line infill across layers (new implementation). #712 2013-04-18 17:34:21 +02:00
Alessandro Ranellucci
bd3384525e Revert "Align rectilinear and line infill across layers. #712" 
This reverts commit a0a54ea706.
 2013-04-15 11:33:24 +02:00
Alessandro Ranellucci
a0a54ea706 Align rectilinear and line infill across layers. #712 2013-04-11 19:36:49 +02:00
Alessandro Ranellucci
c2aa119c09 Require Boost::Geometry::Utils 0.08 2013-04-09 14:03:24 +02:00
Alessandro Ranellucci
94ed6cd239 Always move Z at travel speed. #1093 2013-04-08 22:23:51 +02:00
Jesse Vincent
7ec6332141 split apart the math in nearest_point_index and short-circuit if we know the candidate is no good 2013-04-07 19:53:15 -04:00
Jesse Vincent
e8ca1e59a6 no functional change. only return from one place for clarity 2013-04-07 19:44:32 -04:00
Jesse Vincent
da0e67a891 Only look up $point's X and Y once, rather than once on every pass through the loop. 
(Those lookups are expensive)
 2013-04-07 18:28:08 -04:00
Jesse Vincent
3e8c5804fe Inline comparable_distance_between_points 
It was called on an incredibly hot codepath from a single place. At 12313276 calls
on my test .stl, the sub call overhead alone was a significant perf hit.
 2013-04-07 18:13:40 -04:00
Jesse Vincent
060d2da7fe Small optimization on an incredibly hot codepath. 2013-04-07 18:01:15 -04:00
Alessandro Ranellucci
7e51cbcf69 Allow 0.1mm slots. #959 #1056 2013-04-04 01:24:40 +02:00
Alessandro Ranellucci
b4be61b703 Bugfix: time estimates for cooling were computed for each object separately instead of the whole actual layer. #1071 2013-04-04 01:17:44 +02:00
Alessandro Ranellucci
a563801304 Merge branch 'master' of github.com:alexrj/Slic3r 2013-04-04 01:15:46 +02:00
Alessandro Ranellucci
3afeb5c7b5 Second layer commands were written multiple times 2013-04-04 00:52:11 +02:00
Alessandro Ranellucci
b725847a51 Bugfix: configuration wizard led to crash with simple mode. #1077 2013-04-03 19:26:59 +02:00
Alessandro Ranellucci
88e70a59c7 Don't wipe if option is disabled 2013-04-03 19:08:12 +02:00
Alessandro Ranellucci
d089d2b2d4 Bugfix: crash introduced by wipe 2013-04-03 19:06:33 +02:00
Devin Grady
e602aad998 inspired by f5e48a3, a seems to work to fix 1076 2013-04-01 22:12:51 -05:00
Alessandro Ranellucci
bf809d1fd0 Use linestring_length() from Boost 2013-03-31 19:50:22 +02:00
Alessandro Ranellucci
1187f4846d Some Clipper optimizations 2013-03-31 19:40:25 +02:00
Alessandro Ranellucci
0d6ff22e19 Merge branch 'wipe' 2013-03-31 11:36:04 +02:00
Alessandro Ranellucci
0e6d80d33c Bump version number 2013-03-31 11:24:33 +02:00
Alessandro Ranellucci
01e86c2615 Releasing 0.9.9 2013-03-30 15:59:17 +01:00
Alessandro Ranellucci
04d2231901 Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049 2013-03-30 11:22:12 +01:00
Alessandro Ranellucci
7f23e72a10 Display preview for small files too. #929 2013-03-30 00:52:45 +01:00
Alessandro Ranellucci
33a4ec660d better handling of too-small and too-short models #929. 
These changes handle small models better in the plater preview.
Extremely small thumbnails are preserved instead of culled,
allowing the model to be scaled up. The scale range is extended to
100000% to allow mm-scale objects expressed in meters to be opened
and scaled to mm.
Original coding by mesheldrake
 2013-03-30 00:47:13 +01:00
Alessandro Ranellucci
ac2356f66a Don't crash at the end of empty prints. #1042 2013-03-30 00:36:14 +01:00
Alessandro Ranellucci
7b7c9f6330 Launch even if config is corrupted. #1067 2013-03-30 00:30:21 +01:00
Alessandro Ranellucci
f5e48a306d Bugfix: support material and brim didn't work correctly. Includes unit test. #1074 2013-03-30 00:21:09 +01:00
Alessandro Ranellucci
d4119b0eb1 Better bridge direction detection. #1068 2013-03-29 23:49:58 +01:00
Alessandro Ranellucci
5beb2187d3 Bugfix: infill direction wasn't correctly alternated when infilling every 2 layers. #1068 2013-03-29 19:24:08 +01:00
Alessandro Ranellucci
1b79b1cb20 Refactoring: use the clone() method for inflating Surface objects 2013-03-29 19:18:06 +01:00
Alessandro Ranellucci
e563c62094 Replace SetValue with ChangeValue to avoid wxWidgets to fire useless events 2013-03-29 18:56:34 +01:00
Alessandro Ranellucci
d2b451d9a1 Merge branch 'master' into wipe 2013-03-26 16:28:01 +01:00
Alessandro Ranellucci
aae9625a13 Bugfix: solid-infill-below-area wasn't ignored when fill_density = 0, causing solid layers here and there. #1049 2013-03-26 15:47:40 +01:00
Alessandro Ranellucci
2f046799f2 Removed offset() method from Slic3r::Polygon because it only works with ccw polygons 2013-03-26 14:03:24 +01:00
Alessandro Ranellucci
4c41f6c462 Safer safety_offset() for ExPolygons 2013-03-26 13:57:37 +01:00
Alessandro Ranellucci
769ec0cb03 Better clipping of honeycomb paths 2013-03-26 13:04:57 +01:00
Alessandro Ranellucci
843a700e96 Fixes for wipe 2013-03-25 23:06:18 +01:00
Alessandro Ranellucci
4cb36fcbe2 Remove cooling checkbox from simple mode 2013-03-24 21:28:16 +01:00
Alessandro Ranellucci
6bc5de0b5d Allow custom ranges with layer_height = 0 2013-03-24 15:26:55 +01:00
Alessandro Ranellucci
b7cd362820 Remove scale from G-code comments 2013-03-19 19:16:13 +01:00
Alessandro Ranellucci
7ec6c6ffba Lower 0.5*w to 0.4*w to fill finer gaps. #1057 2013-03-19 16:08:19 +01:00
Alessandro Ranellucci
34b192fde3 Merge pull request #1059 from cakeller98/Universal_File_Visibility 
Added "known" as a valid model file type
 2013-03-19 08:05:19 -07:00
Alessandro Ranellucci
9c122bda5e Fix memory leak in avoid_crossing_perimeters. #1044 2013-03-19 16:02:03 +01:00
Alessandro Ranellucci
813aa5b307 Allow drag and drop for OBJ files 2013-03-19 12:25:10 +01:00
Alessandro Ranellucci
fd2a5e894a Respect perimeter/infill order when multiple extruders are configured but only one is used 2013-03-19 11:58:03 +01:00
Christopher Keller
8bbaafd830 Added "known" as a valid model file type 
=> 'Known files (*.stl, *.obj, *.amf)|*.stl;*.STL;*.obj;*.OBJ;*.amf;*.AMF;*.xml;*.XML',

When dialog pops up, it can see ALL known file types instead of only stl.
 2013-03-18 20:52:55 -07:00
Alessandro Ranellucci
ec5f0635f7 Add wipe in GUI 2013-03-18 21:20:32 +01:00
Alessandro Ranellucci
96f1b7ab57 Merge branch 'master' into wipe 2013-03-18 21:18:24 +01:00
Alessandro Ranellucci
1abd8c9a9e Remove the 'simplify' handle in ExtrusionPath after the recent refactoring. #1054 2013-03-18 18:03:14 +01:00
Alessandro Ranellucci
f0ac1c704e Fix test framework detecting dE=0 as retraction 2013-03-18 18:01:01 +01:00
Alessandro Ranellucci
0b81911cff Bugfix: artifacts near walls. #1049 2013-03-18 17:55:16 +01:00
Alessandro Ranellucci
8ce31c2a2b Don't exclude any infill under internal bridges; revert infill pattern to rectilinear for internal bridges. #240 2013-03-18 13:32:19 +01:00
Alessandro Ranellucci
7f917671ab Bugfix: horizontal projection for high-res models might show corrupted result 2013-03-17 15:39:51 +01:00
Alessandro Ranellucci
8d2c651ef2 $surface->thickness was erroneously defaulting to 1 mm 2013-03-17 14:58:10 +01:00
Alessandro Ranellucci
1064c9bb2a Merge branch 'master' into grow-narrow 
Conflicts:
	lib/Slic3r/Fill.pm
	lib/Slic3r/Print/Object.pm
 2013-03-17 02:30:20 +01:00
Alessandro Ranellucci
7de8b20bc4 New wipe feature 2013-03-17 02:22:50 +01:00
Alessandro Ranellucci
83065b0789 Bugfix: wrong flow and bad pattern rotation when infill-every-layers was set to an arbitrary high value 2013-03-17 01:10:40 +01:00
Alessandro Ranellucci
04c0caad0b Fix honeycomb infill overlap with perimeters 2013-03-17 00:57:58 +01:00
Alessandro Ranellucci
537fca47c5 Use solid infill speed for internal bridges; apply slowdown if any; don't use bridge fan settings. #240 2013-03-17 00:42:53 +01:00
Alessandro Ranellucci
700fee14aa Set honeycomb as default fill pattern, as it works better at low layer heights and makes stronger parts 2013-03-17 00:24:53 +01:00
Alessandro Ranellucci
c999d0c44f Set default value for first_layer_height to 0.35mm so that first_layer_extrusion_width = 200% works fine even when user sets layer_height to 0.1. A first layer height of 0.35mm works fine for both 0.35 and 0.5 nozzles so it should be fine for most users 2013-03-17 00:22:53 +01:00
Alessandro Ranellucci
78a4ae4835 Use full flow for sparse infill by default 2013-03-17 00:21:17 +01:00
Alessandro Ranellucci
35bd5a3423 New --solid-infill-extrusion-width option 2013-03-17 00:02:31 +01:00
Alessandro Ranellucci
c13d9e9fb3 Don't collapse overhangs too early 2013-03-16 21:51:38 +01:00
Alessandro Ranellucci
0f5064dd32 Untested fix for incomplete honeycomb support material. #1032 2013-03-16 21:10:12 +01:00
Alessandro Ranellucci
25554a345f Reorder object copies using a nearest neighbor search 2013-03-16 20:56:14 +01:00
Alessandro Ranellucci
cf5adca928 New --resolution option to simplify input models 2013-03-16 19:58:34 +01:00
Alessandro Ranellucci
10b6bc9d15 Removed keep_meshes 2013-03-16 19:39:00 +01:00
Alessandro Ranellucci
f4b8185698 Fixed typo preventing support material to work with new simplify() syntax 2013-03-16 19:11:49 +01:00
Alessandro Ranellucci
db2e76a0df New option to change perimeter order. #534 2013-03-16 18:56:49 +01:00
Alessandro Ranellucci
33b40eda18 Always fix self-intersecting polygons that Douglas-Peucker might return 2013-03-16 18:42:56 +01:00
Alessandro Ranellucci
0f8ca6191a Merge branch 'master' into grow-narrow 2013-03-16 16:22:03 +01:00
Alessandro Ranellucci
dc0f706789 Bugfix: simplification of support areas could lead to complex polygons with bad orientation, thus causing wrong pattern clipping. #1032 2013-03-14 14:27:08 +01:00
Alessandro Ranellucci
f528088d31 Merge branch 'master' into grow-narrow 2013-03-13 16:39:57 +01:00
Alessandro Ranellucci
9713b9f524 Fix narrow fills growing 2013-03-13 14:55:58 +01:00
Alessandro Ranellucci
0feef890b1 Use Class::XSAccessor 2013-03-13 01:29:45 +01:00
Alessandro Ranellucci
cab51d4581 One more slight optimization 2013-03-13 01:14:47 +01:00
Alessandro Ranellucci
a412291690 Little optimization 2013-03-13 01:07:06 +01:00
Alessandro Ranellucci
d9b82c79da Grow narrow infill regions into void - to be tested more 2013-03-13 01:03:54 +01:00
Alessandro Ranellucci
6058384978 Fixed regression causing crash when support material threshold angle was defined. #1048 2013-03-12 19:39:43 +01:00
Alessandro Ranellucci
5c1336d2de Clarify that min Z, max Z and layer height are supposed to be expressed in mm 2013-03-12 10:28:51 +01:00
Alessandro Ranellucci
a5e6340004 Workaround for HideRowLabels() missing in wxWidgets 2.8. #770 2013-03-11 20:00:12 +01:00
Alessandro Ranellucci
999af84c54 Don't make internal bridges when fill_density == 1. #1045 2013-03-11 18:41:12 +01:00
Alessandro Ranellucci
0df8398a39 Use concentric infill for internal bridges. #240 2013-03-11 18:38:32 +01:00
Alessandro Ranellucci
0eecf33198 Bugfix: narrow solid shells were collapsed when spacing was added before generating infill, so we grow them 2013-03-11 18:37:01 +01:00
Alessandro Ranellucci
b73c301c55 Bugfix: double lift at toolchange. #953 2013-03-11 17:06:05 +01:00
Alessandro Ranellucci
0326962d11 Merge branch 'new-extra-perimeters' 2013-03-11 14:24:02 +01:00
Alessandro Ranellucci
e809a5bdcc Added support for expolygons in Slic3r::SVG 2013-03-11 14:23:45 +01:00
Alessandro Ranellucci
b7945ac790 Finished new extra perimeters implementation 2013-03-11 14:23:16 +01:00
Alessandro Ranellucci
428cd7867d Missing bit 2013-03-11 12:47:27 +01:00
Alessandro Ranellucci
74e21d7a04 New implementation of extra perimeters - to test 2013-03-10 19:08:36 +01:00
Alessandro Ranellucci
964accb588 Typo 2013-03-10 19:07:41 +01:00
Alessandro Ranellucci
2942485a94 New option to make infill before perimeters. #1039 2013-03-10 18:15:44 +01:00
Alessandro Ranellucci
ab3d1ac820 Give priority to infill extruder if it was used last. #940 2013-03-10 17:40:19 +01:00
Alessandro Ranellucci
107f48d894 Reduce toolchanges by giving priority to last extruder on layer change. #940 2013-03-10 17:28:03 +01:00
Alessandro Ranellucci
dac168eff0 Do each island completely if avoid_crossing_perimeters is enabled. #278 2013-03-10 16:09:03 +01:00
Alessandro Ranellucci
f10a4787b2 Fix layer ordering when printing objects with different layer heights 2013-03-10 15:36:52 +01:00
Alessandro Ranellucci
f670acb4b1 Slice a single object with multiple layer heights. :-) 2013-03-10 14:58:49 +01:00
Alessandro Ranellucci
d1acc511b3 Refactor ObjectDialog into a tab panel 2013-03-10 12:46:54 +01:00
Alessandro Ranellucci
6a0ba97f0e Move ObjectDialog to a separate file 2013-03-10 12:33:10 +01:00
Alessandro Ranellucci
d2152a53a0 Missing tooltip for extra perimeters 2013-03-10 12:30:43 +01:00
Alessandro Ranellucci
17cbca5e06 Factor out layer height in support material generation 2013-03-10 12:22:40 +01:00
Alessandro Ranellucci
2ab5fa9c72 Factor out layer height from combine_infill() 2013-03-10 12:08:18 +01:00
Alessandro Ranellucci
2275de9f0d Factored out the layer height logic 2013-03-10 11:37:16 +01:00
Alessandro Ranellucci
e9c7460c11 New --bridge-acceleration option 2013-03-09 20:31:09 +01:00
Alessandro Ranellucci
2acda9973e Don't apply acceleration settings to travel moves 2013-03-09 20:28:03 +01:00
Alessandro Ranellucci
b7b89ff7f2 Bugfix: *-acceleration options didn't work in CLI 2013-03-09 20:21:05 +01:00
Alessandro Ranellucci
460e169c67 New option to disable retraction on layer change 2013-03-09 20:05:43 +01:00
Alessandro Ranellucci
e71bf48463 Add a command to lift nozzle in default start G-code 2013-03-09 19:51:09 +01:00
Alessandro Ranellucci
d50e0af548 Make sure the inwards move after last perimeter loop doesn't exceed object boundary 2013-03-09 17:15:45 +01:00
Alessandro Ranellucci
caa79583ff Tiny optimization 2013-03-09 17:08:17 +01:00
Alessandro Ranellucci
fa41e15c68 Fixed regression causing thin walls to be processed twice, thus producing overlapping straight paths and zigzag. #1035 2013-03-09 17:07:11 +01:00
Alessandro Ranellucci
a2702082b2 Merge pull request #962 from scottp/issue_885b 
Add defaults into Tooltips from #885
 2013-03-09 07:48:20 -08:00
Alessandro Ranellucci
9247b3e9f4 New --no-plater and --gui-mode options. #604 2013-03-09 16:43:09 +01:00
Alessandro Ranellucci
af50272b3b Refactor simple mode definitions to dedicated SimpleTab classes 2013-03-09 16:27:18 +01:00
Alessandro Ranellucci
5477d66902 Advertise the expert mode in simple mode 2013-03-09 14:55:07 +01:00
Alessandro Ranellucci
46f35e39f6 Some more tweaks 2013-03-08 23:34:57 +01:00
Alessandro Ranellucci
0748e088a0 Reorder options in simple mode 2013-03-08 23:07:14 +01:00