kfazz
18f97c4013
add HardwareSerial and SoftwareSerial for Re-ARM.
...
HardwareSerial has been tested on Uart0 (debug header) and Uart3 (i2c connector)
Software Serial has been tested to work bi-directionally at 9600 and 115200
using pins 6 and 63 on J5, and unidirectionally (write only) at 250000.
The code used to test was Teemuatlut's tmc2208 patch, and a few small changes to main used to echo recieved chars back to a host pc.
2017-08-31 18:33:07 -05:00
Bob-the-Kuhn
01fb45b4f8
hybrid PWM system
...
Uses PWM1 to directly control pins 4, 6 & 11 (servo 0, 1 & 3) and PWM1
generated interrupts to control other pins.
Interupt control of the servo pins had too much jitter so switched all
that we could to PWM1 direct control. The PWM1 direct control pins have
less than 1 microsecond pulse width jitter while the interrupt
controlled ones can have 20+ microseconds of jitter.
Also added insurance to the servo code in the "disable servo after move"
section.
2017-08-31 18:33:07 -05:00
Tannoo
94dd39b3b7
LCD_UBL_memory_slot_corrections ( #7516 )
...
* LCD_UBL_memory_slot_corrections
Changed the memory slot edit function to work with the
`settings.calc_num_meshes()`
* Add a little more safety margin...
* More corrections
Error handling when the EEPROM is not available.
2017-08-31 18:33:07 -05:00
Roxy-3D
8587c4e1ec
Minor corrections to 32-bit branch ( #7514 )
...
Mostly... clean up some compile time warnings for the 20x4 LCD Display.
2017-08-31 18:32:09 -05:00
Bob-the-Kuhn
7342d5c07a
ST7565
2017-08-31 18:31:43 -05:00
Bob-the-Kuhn
97444391e0
Servo & PWM support for LPC1768 ( #7500 )
2017-08-31 18:31:43 -05:00
Tannoo
859fa35287
Re-Arm bugfixes ( #7495 )
...
* UBL_correction
* RGB Map function
2017-08-31 18:31:43 -05:00
Bob-the-Kuhn
d80877d570
Set pinMode with every digitalWrite (legacy compatibility)
2017-08-31 18:31:07 -05:00
Chris Pepper
9a950e3a5a
Update the delay functions and change the default pinmap for character displays ( #7434 )
2017-08-31 18:31:07 -05:00
Scott Lahteine
105324b85b
Match the license headers in other files
2017-08-31 18:31:07 -05:00
Bob-the-Kuhn
69704b93f2
ultralcd.cpp fix compile error - switch to int16_t
2017-08-31 18:31:07 -05:00
Chris Pepper
61c0a10efe
Revert "SPI API platform implementation stubs" ( #7416 )
...
This reverts commit 2dfa6ca72a2afc521b8b58f7ffe09a
2017-08-31 18:31:07 -05:00
Chris Pepper
a5cf3a190c
bugfix-2.0.x critical fix ( #7401 )
...
* Fix mistake in gitignore file and add in missing core files.
The missing leading slash on "lib" meant all folders names lib in the directory tree are ignored, rather than just the top level PlatformIO lib folder
* Add LiquidCrystal Library and associated headers modified to compile.
2017-08-31 18:23:44 -05:00
Bob-the-Kuhn
76da81c1de
minimize SD card reads when using SDCARD_SORT_ALPHA (Re-ARM board)
...
Because of the Re-ARM card's pinout there is only one SPI connected to
the RepRap Discount Full Graphic LCD display. The LCD responds to ANY
SCK transitions no matter if it's enable is inactive. The result is
garbage (usually bars) on the LCD display whenever there is SD card
activity.
This code minimizes this by only accessing the SD card when changing
directory levels if :
SDCARD_SORT_ALPHA is enabled
SDSORT_USES_RAM is true
SDSORT_CACHE_NAMES is true
The code changes result in file names being pulled from the ALPHA SORT
memory array rather than the SD card.
The code also gives the file count and file index functions their own
variables. When they shared a common variable the index function
sometimes resulted in the file count being short by 1.
=======================================================================
cardreader.cpp & pins_RAMPS_RE_ARM.h changes
Added another condition to cardreader.cpp to enable getting file names
only from RAM.
pins_RAMPS_RE_ARM.h :
Added comments about the SD card accesses and the LCD display
Combined all versions into this one.
2017-08-31 18:23:44 -05:00
Bob-the-Kuhn
84a11cfedc
HAL compatible pinsDebug & misc
...
Re-ARM has been tested. AVR has not been tested.
1) moved all cpu specific items to files in the low level HAL directory
for that CPU (pinDebug_Re-ARM.h & pinsDebug_AVR_8_bit.h
2) added pinsDebug.h to the top level directory
3) modified HAL_pinsDebug.h to select the correct support file for the
selected CPU
4) Patched sanitycheck to stop throwing false errors. A long term
solution will be done
5) misc changes & bug fixes
arduino.cpp - included macros.h to fix a missing definition
pinmap_re-arm.h - removed a duplicated line.
pinmapping.h - changed from "ENABLED" to "defined" to fix a compile
error
======================================================================
split SanityCheck up, improve pinsDebug system
======================================================================
switch to latest pins_RAMPS_RE_ARM.h
2017-08-31 18:23:44 -05:00
Christopher Pepper
32e759c928
SPI API platform implementation stubs
2017-08-31 18:23:44 -05:00
Christopher Pepper
4183a249b6
Moved CMSIS and other LPC1768 dependencies
...
Fixes Arduino IDE builds for 8-bit AVR,
misc: Adafruit NeoPixel currently incompatible with Teensy 3.5-6, blacklisted
2017-08-31 18:23:44 -05:00
Christopher Pepper
b55295ad33
Post merge fix
...
Add macros.h to allow Enabled macro, also need to reference include files directly
2017-08-31 18:23:44 -05:00
Christopher Pepper
c66d1ac651
Debug Pins Support
2017-08-31 18:21:38 -05:00
Christopher Pepper
a31e32969f
Base HAL SPI Changes
2017-08-31 18:21:38 -05:00
Christopher Pepper
bcd050f33b
Initial HAL SPI API
2017-08-31 18:21:38 -05:00
Christopher Pepper
44b0c186a6
HAL for Re:ARM (LPC1768) architecture
2017-08-31 18:21:38 -05:00
teemuatlut
f3e562e46e
HAL for 32-bit Teensy (3.5, 3.6) architecture
2017-08-31 18:15:07 -05:00
Christopher Pepper
cfef925559
HAL for DUE architecture
2017-08-31 18:15:07 -05:00
Christopher Pepper
4b16fa3272
Implement HAL and apply macros across code-base
...
Implement AVR Platform
2017-08-31 18:14:31 -05:00
Scott Lahteine
e4fcf460e7
Marlin bugfix-2.0.x Version/README
2017-08-31 17:56:08 -05:00
Scott Lahteine
367e1b54ba
Merge pull request #7591 from thinkyhead/bf1_misc_patches
...
M111: no args reports current flags
2017-08-31 15:19:29 -05:00
Scott Lahteine
8a184a526a
Marlin: Patch G33, allow M111 to give status
2017-08-31 14:35:00 -05:00
Scott Lahteine
353c23b16e
Enforce BED_CENTER_AT_0_0 on Delta, SCARA
2017-08-31 14:34:59 -05:00
Scott Lahteine
898f48e331
CNC workspace planes for G5
...
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
2017-08-31 14:29:29 -05:00
Scott Lahteine
5851c2d36f
MAX7219 followup ( #7564 )
...
* Add MAX7219_DEBUG to Travis CI testing
* Tweak config and use standard pin naming for MAX7219_DEBUG
* MAX7219: Apply coding standards, use macros, etc.
* Make code work...
2017-08-31 11:44:43 -05:00
Scott Lahteine
52073f21c5
Merge pull request #7556 from thinkyhead/bf1_slovak_language
...
Slovak UTF-8 translation
2017-08-27 21:05:53 -05:00
Scott Lahteine
321f98f867
Fix servo delay in Folgertech config
2017-08-27 20:53:27 -05:00
jneilliii
36771e9492
Fixes required for Creality CR-10
2017-08-27 20:39:16 -05:00
Roxy-3D
3f0b38ed5d
Add Max7219 LED Matrix Debug Support ( #7563 )
...
* Add Max7219 LED Matrix Debug Support
The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.
The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.
* Try to keep Makefile up to date.
2017-08-25 17:03:07 -05:00
GMagician
0067bb2840
Addressing #7552
...
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
2017-08-25 03:23:16 -05:00
Scott Lahteine
2b12093589
Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben
...
New feature: Part-Cooling Fan Multiplexer
2017-08-25 03:16:40 -05:00
Michal Holes
54d48130f3
Slovak UTF-8 translation
...
Slovak UTF-8 translation
2017-08-23 19:14:35 -05:00
Scott Lahteine
86c024ce98
Organize, document pins.h include lines
2017-08-23 18:33:00 -05:00
Scott Lahteine
c7b07d20f2
Minor patches to pins files
2017-08-23 18:32:59 -05:00
Scott Lahteine
356af7dcb0
Tweak Sanguinololu-related pins files
2017-08-23 18:32:59 -05:00
Scott Lahteine
11a724d8fc
Sanguinololu example configuration
2017-08-23 18:32:59 -05:00
Scott Lahteine
e337df2e98
Miscellaneous tweaks to serial outputs, code cleanups
2017-08-23 18:32:58 -05:00
Vben
c0409b85e7
New feature: Part-Cooling Fan Multiplexer
2017-08-18 15:59:04 -05:00
Scott Lahteine
e82e9073d6
Merge pull request #7530 from GMagician/Code-reduction
...
Code reduction with some configurations
2017-08-18 13:57:59 -05:00
GMagician
6127154af3
Fix identation by tab
...
There was a tab instead of spaces
2017-08-18 11:34:55 +02:00
GMagician
b94a1c6b9f
Code reduction this some configurations
...
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
2017-08-18 11:11:00 +02:00
GMagician
405a2132f3
#7529 compile fix
...
I made an error in previous fix
2017-08-17 22:04:28 +02:00
GMagician
869d7f3703
#7504 missing part
...
#7504 integration has missed this part.
When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it.
In my original fix I completely removed this part but maybe this is a better compromise
2017-08-17 21:43:47 +02:00
Scott Lahteine
101ba70517
Merge pull request #7505 from thinkyhead/bf1_anet_1_pio
...
Add Anet 1.0 to Platformio.ini
2017-08-17 00:33:20 -05:00
Vben
4817b39d98
Added new feature for AutoParking Extruder (APE)
2017-08-16 17:33:11 -05:00
Scott Lahteine
6772e33ef6
Use [XY]_CENTER for error correction
...
Followup to #7512
2017-08-16 16:13:09 -05:00
Scott Lahteine
385f1bb9e5
Merge pull request #7504 from thinkyhead/bf1_servo_delays
...
Individual servo delays
2017-08-16 16:05:22 -05:00
Scott Lahteine
2a31c9f2ce
Merge pull request #7515 from cdedwards/bugfix-1.1.x
...
Fix for G26 spam output
2017-08-16 16:01:10 -05:00
MTrab
5fa61c0ad3
Add Anet 1.0 to Platformio.ini
...
Added env:anet10 to platformio.ini for easy compile and upload to this board
2017-08-16 15:59:20 -05:00
Scott Lahteine
b3f59ec945
Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16
...
Add "Level Corners" menu item
2017-08-16 15:58:15 -05:00
Tannoo
b33739d493
UBL_Language_Update ( #7520 )
...
* UBL_Language_Update
Translatable strings
* Use slightly better wording...
* Use slightly better wording...
2017-08-16 09:49:04 -05:00
Scott Lahteine
a1878cd1c0
Add "Level Corners" menu option
2017-08-16 02:54:33 -05:00
Scott Lahteine
0a18fb735e
Use "PSU" label to fit on screen
2017-08-16 02:51:00 -05:00
Scott Lahteine
30887feae3
Tweak some formatting in ABL G29
2017-08-16 02:51:00 -05:00
Thomas Moore
257b693ab0
Advanced pause fixes ( #7518 )
...
* Disallow filament change while paused
* Use kinematic movemements in pause_print and resume_print
2017-08-15 22:57:13 -05:00
Tannoo
ab2ac1af71
UBL_LCD_storage_corrections ( #7517 )
...
Correcting the storage selection.
Also EEPROM error handling on the LCD.
2017-08-15 21:01:11 -05:00
cdedwards
f1843211e6
Fix for G26 spam output
...
while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.
2017-08-15 17:04:53 -06:00
Roxy-3D
be5ca34215
Allow G29 to work correctly even if nozzle is off the mesh. ( #7512 )
...
* work around previous regressions...
2017-08-15 17:04:52 -05:00
Scott Lahteine
06541ec885
Merge pull request #7448 from thinkyhead/bf1_delta_fixes
...
Prevent damage if DELTA_HEIGHT is set badly
2017-08-15 16:35:09 -05:00
GMagician
e9c72978c7
Implement SERVO_DELAY as array
...
This modify give SERVO_DELAY x servo basis
2017-08-15 00:28:47 -05:00
Scott Lahteine
96ae53cf41
Use MOVE_SERVO macro where possible
2017-08-15 00:28:39 -05:00
Scott Lahteine
3be9c19f12
Hold on move axis screens
2017-08-14 22:51:47 -05:00
Scott Lahteine
8fd58cd6dc
Patch goto labels for consistency
2017-08-14 22:51:47 -05:00
Scott Lahteine
75e6f72c89
Fix hexadecimal number formatting
2017-08-14 22:50:44 -05:00
Scott Lahteine
ac76101ec3
Eliminate goto in gcode_M48
2017-08-11 17:00:40 -05:00
Scott Lahteine
75e6ead5fd
Eliminate goto in gcode_G33
2017-08-11 17:00:40 -05:00
Scott Lahteine
6bd63d27b5
Updates to G29 for probe error handling
2017-08-11 17:00:40 -05:00
Thomas Moore
f54e0fc90f
Prevent damage if DELTA_HEIGHT is incorrect
2017-08-11 16:09:14 -05:00
Scott Lahteine
0938c62b48
Neater position_is_reachable call
2017-08-11 15:55:32 -05:00
Scott Lahteine
9d95b1b4df
Tweak Conditionals_post.h
2017-08-11 15:55:32 -05:00
Scott Lahteine
35d5a7bdff
Tweak CR-10 config/pins
2017-08-11 15:55:31 -05:00
Scott Lahteine
419c8969a7
Merge pull request #7479 from thinkyhead/bf1_fix_italian
...
Fix Italian string length
2017-08-10 18:42:35 -05:00
Frederik Kemner
25a11cd485
Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 ( #7480 )
2017-08-10 16:53:04 -05:00
Scott Lahteine
7f3406d47b
Fix Italian string length
...
Addressing #7264
2017-08-10 15:41:35 -05:00
Jozsef Kiraly
97c21e9007
Support for Geeetech GT2560 Rev.A/Rev.A+
2017-08-06 00:42:54 -05:00
Scott Lahteine
b2822a59f9
Add a sanity check for valid bed size
2017-08-05 03:49:04 -05:00
Scott Lahteine
a7e5c1bf19
Use float to init TMC2133 steps-per-mm
2017-08-05 03:48:52 -05:00
Scott Lahteine
dd66d21749
Extend DEACTIVATE_SERVOS_AFTER_MOVE sanity-check
...
As proposed in #7429
2017-08-05 03:48:52 -05:00
richarddeweerd
b370906031
Example config for Geeetech I3 Pro X with GT2560 controller
2017-08-05 03:48:52 -05:00
Scott Lahteine
804818b4d9
Bring configs up to date
2017-08-05 03:48:52 -05:00
Scott Lahteine
dd841a3675
Merge pull request #7410 from benlye/user-script-feedback
...
Make audible user script feedback optional
2017-08-05 02:59:56 -05:00
Florian Heilmann
0fd2923a9f
Fix compilation with ADVANCED_PAUSE_FEATURE without SDSUPPORT ( #7412 )
...
* Fix compilation of ADVANCED_PAUSE_FEATURE without SDSUPPORT
* Fix Identation
* Make use of IS_SD_PRINTING macro
as per @MagoKimbra
2017-08-05 02:58:38 -05:00
benlye
24af9e1bf4
Make audible user script feedback optional
...
Add a parameter to enable/disable audible user script feedback
2017-08-04 17:24:10 +01:00
Florian Heilmann
6827a162bb
Update language_de.h
...
Add
MSG_BLTOUCH
MSG_DELTA_SETTINGS
MSG_UBL_MESH_EDIT
MSG_UBL_OUTPUT_MAP_BACKUP
MSG_UBL_STEP_BY_STEP_MENU
MSG_Z_FADE_HEIGHT
2017-08-04 09:35:21 +02:00
Scott Lahteine
3497153cf1
Followup cleanup patch
...
Fix regression in #7428
2017-08-03 14:55:22 -05:00
Scott Lahteine
16f8c4865a
Merge pull request #7409 from FHeilmann/bf_update_ru_translation
...
Update Russian Translation
2017-08-03 14:54:40 -05:00
Scott Lahteine
622048ffb0
Clean up whitespace, trailing space, bad tab conversion, etc.
2017-08-03 11:20:03 -05:00
Roxy-3D
2cbdc0ebb6
Fix large Z corrections when nozzle moves off of UBL mesh ( #7415 )
2017-08-02 16:51:04 -05:00
Florian Heilmann
650e5274c4
Update Russian Translation
2017-08-02 21:19:15 +02:00
Scott Lahteine
ce65c13a97
Merge pull request #7398 from fiveangle/bf_lcd_bed_level_requirements
...
Clarify LCD_BED_LEVELING requirements
2017-08-01 17:46:07 -05:00
Dave Johnson
936dfb965c
Clarify LCD_BED_LEVELING requirements
...
LCD_BED_LEVELING requires PROBE_MANUALLY with auto bed leveling enabled. See #7396
2017-08-01 14:13:54 -07:00
Kai
ffe3013bb5
Fix for #7395
...
Filament change causes freeze during paused print. This PR disables Filament change in the prepare menu when a print from SD Card is paused. See #7395
2017-08-01 21:45:41 +02:00
Øystein Krog
e948f77cf9
Fix DUAL_X_CARRIAGE not moving at all
...
Axis would only move when homing.
Bug introduced in 91841d75c9Fixes #6956 , fixes #7050 and fixes #7291
2017-07-31 18:44:26 +02:00
Scott Lahteine
08b0456d91
Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor
...
Manual Bed Leveling: Goto previous Z height at each probe point
2017-07-30 05:41:12 -05:00
teemuatlut
936d00dda8
Implement probing delay for piezo sensors
2017-07-29 21:46:40 -05:00
Scott Lahteine
29eef360d0
Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv
...
Fixes for FWRETRACT
2017-07-29 21:20:19 -05:00
Wilfried Chauveau
894608f8a3
Manual Bed Leveling: Goto previous Z height at each probe point
2017-07-29 21:15:37 -05:00
Scott Lahteine
ff06e1a030
Merge pull request #7372 from tcm0116/delta_calib_menu
...
Move Delta Calibration menu to the Prepare menu
2017-07-29 21:05:03 -05:00
Thomas Moore
15e009b6ca
Move Delta Calibration menu to the Prepare menu
2017-07-28 08:33:18 -05:00
Scott Lahteine
bfd396c13a
Patch to fix some compiler warnings
2017-07-28 02:27:16 -05:00
Scott Lahteine
48c5f3dddf
Tweak kill action #ifdef
2017-07-27 23:42:01 -05:00
Scott Lahteine
be7a9a07c5
Don't reset grid with G29 Q + PROBE_MANUALLY
2017-07-27 22:47:43 -05:00
Scott Lahteine
dfe670247d
Merge pull request #7363 from marcio-ao/bugfix-1.1.x
...
Makefile fixes and U8G support.
2017-07-27 21:31:56 -05:00
Marcio Teixeira
af83c512b8
Added support for U8G.
2017-07-27 07:49:25 -06:00
Scott Lahteine
4eff18854b
Rename options with swap_ prefix
2017-07-27 04:14:29 -05:00
Scott Lahteine
14482d2f2a
Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo
2017-07-27 04:14:29 -05:00
Scott Lahteine
9fc72422e4
Don't let the flow multiplier affect retract/recover length
2017-07-27 04:14:29 -05:00
Scott Lahteine
fee696db5d
Improve retract() for G10/G11/autoretract
2017-07-27 04:14:29 -05:00
Scott Lahteine
423b0f3a1e
Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT
2017-07-27 04:14:29 -05:00
Scott Lahteine
51864fd365
Add bed size as a configuration option
2017-07-26 23:04:54 -05:00
Scott Lahteine
dc7c95e07b
Remove @ section fwretract
2017-07-26 22:46:16 -05:00
Dave Johnson
4718c09c48
Remove extraneous USBCON defines for AT90USB boards
...
USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h. Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting.
more USBCON unification
2017-07-23 16:41:48 -07:00
C. Scott Ananian
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
...
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
2017-07-22 16:07:55 -05:00
Scott Lahteine
a059e95463
Bring Infitary i3 config up to date
2017-07-21 20:49:19 -05:00
Scott Lahteine
d6d6043548
Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin
...
MKS 1.3+: Add pin mapping for PS_ON
2017-07-21 20:00:26 -05:00
Alexey Shvetsov
851f9f5399
Update Russian translation - Part 1
...
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2017-07-21 19:32:37 -05:00
Scott Lahteine
b7a16e4468
Merge pull request #7315 from fixoid/patch-1
...
Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1
2017-07-21 19:10:54 -05:00
Alexey Shvetsov
f38b8c5bf8
MKS 1.3+: Add pin mapping for PS_ON
...
This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4).
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2017-07-21 18:50:05 -05:00
Scott Lahteine
8a3bc6be4d
Improve FWRETRACT config options and commentary
...
Add more details as requested in #7198
2017-07-20 22:57:50 -05:00
Scott Lahteine
b0173ccdb9
Drop extra initializers for vars initialized by EEPROM code
2017-07-20 22:57:49 -05:00
Scott Lahteine
7afafb05b8
Split G10/G11 into separate functions
2017-07-20 02:24:13 -05:00
Scott Lahteine
c45798694f
Add some more requirements to the G-code list
2017-07-20 02:24:13 -05:00
Scott Lahteine
72de280c1e
BARICUDA valve pressure consistently uint8_t
2017-07-20 02:21:40 -05:00
Scott Lahteine
4d98e3f0a7
General cleanup
2017-07-20 02:21:40 -05:00
fixoid
e530c67349
Fixing SWITCHING_EXTRUDER feature
2017-07-19 21:15:26 +03:00
Tannoo
2ad3ca5d8a
Bugfix ( #7310 )
2017-07-18 22:55:14 -05:00
Roxy-3D
37a6833d7e
Allow the sampled point to be added into the Least Squares Best Fit ( #7289 )
...
Without this... The LSF won't work because none of the sampled points
in this code block get added.
2017-07-13 16:33:02 -05:00
C. Scott Ananian
a519b093b9
Fix build by replacing qr_solve by least_squares_fit. ( #7285 )
...
This was broken by 9af67e2446
2017-07-13 12:02:15 -05:00
Scott Lahteine
0873c667fa
Apply coding standards to recent merges
2017-07-13 00:46:16 -05:00
Scott Lahteine
8c2907d10f
Fix ABL broken by recent change
2017-07-12 22:56:18 -05:00
Roxy-3D
9af67e2446
Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR ( #7276 )
...
We can save more and a pile of RAM by eleminating the eqnBVector and
EqnAMatrix arrays next.
2017-07-10 19:05:11 -05:00
Scott Lahteine
76e90b93b7
Volatile keyword not needed for parser.seen
2017-07-10 15:38:54 -05:00
Jamie Bainbridge
00e4ced58e
Stay in User Menu after command. Add feedback.
...
When a user executes a User Menu command, the LCD returns to the main menu. If the user has multiple menu items they want to run, such as one menu item per bed leveling corner, then it's better to stay in the User Menu rather than return to the main menu.
This PR modifies Marlin to stay in the User Menu after a command.
2017-07-10 13:47:12 -05:00
Scott Lahteine
1066b17457
Merge pull request #7260 from thinkyhead/bf_G33_update_27
...
Updates to G33 and its LCD code
2017-07-10 13:39:36 -05:00
Tannoo
e927941c06
Bugfix ( #7265 )
...
Fix compile error when UBL is enabled but there is no LCD Panel.
2017-07-08 09:44:50 -05:00
Scott Lahteine
68aea9c01d
Merge pull request #7261 from thinkyhead/bf_configs_by_vendor
...
Arrange more example configs by vendor
2017-07-07 15:46:22 -05:00
Tannoo
aaacef9441
Corrections ( #7231 )
...
20x4 map integration. Also some minor changes to the UBL Menu layout. Both 20x4 LCD's and Graphical LCD panels should have similar functionality now.
2017-07-07 11:05:08 -05:00
LVD-AC
4bc79ec877
Updates for G33-LCD interface
2017-07-07 05:00:59 -05:00
Scott Lahteine
186580b55f
Arrange example configurations by vendor
2017-07-07 04:48:23 -05:00
Scott Lahteine
6be369f3ea
Add some config names to AUTHOR
2017-07-07 04:46:33 -05:00
Scott Lahteine
7fc31a7940
Merge pull request #7258 from thinkyhead/bf_cleanups_jbrazio
...
Add support for BQ heated bed kit with Hephestos 2
2017-07-07 04:11:07 -05:00
Scott Lahteine
11e376e920
Merge pull request #7256 from thinkyhead/bf_cleanup_july_6
...
Assign -1 to LCD_PINS_D4-7 if not defined
2017-07-07 03:22:47 -05:00
João Brázio
2065591daf
Add support for BQ heated bed kit with Hephestos 2
2017-07-07 03:10:38 -05:00
essgcee
61be28133d
Support for Creality CR-10
...
Creality board is a Melzi / Sanguinololu variant, but using different pins for LCD control (and maybe other minor variations)
2017-07-06 23:08:10 -05:00
Scott Lahteine
9248a90a4c
Assign -1 to LCD_PINS_D4-7 if not defined
2017-07-06 22:47:51 -05:00
Scott Lahteine
5ef1e5ef60
Tweaks for M43
2017-07-06 21:47:50 -05:00
Scott Lahteine
c7732db99d
Fix: Use of digitalRead, digitalWrite breaks on AT90USB
2017-07-06 21:25:56 -05:00
Scott Lahteine
f713f25fa5
Clean up excess whitespace
2017-07-06 21:24:30 -05:00
Scott Lahteine
fc9ce65095
Add BUSY_WHILE_HEATING for hosts that need it
2017-07-06 16:28:57 -05:00
Scott Lahteine
c6d430670a
Clear SHOW_BOOTSCREEN with no LCD
2017-07-06 14:21:27 -05:00
Scott Lahteine
11c589c3ec
Fix compile issue with G38
...
Fixes #7250
2017-07-06 14:21:27 -05:00
Scott Lahteine
678914be25
Patch M23 to work around Simplify3D bug
...
Addressing #7227
2017-07-06 14:00:58 -05:00
LVD-AC
3efe4aeef8
Add PROBE_MANUALLY support to G33
2017-07-04 18:06:54 -05:00
Scott Lahteine
cca1cca3a5
Merge pull request #7237 from thinkyhead/bf_cz_mapper
...
UTF-8 mapper for Czech
2017-07-04 16:45:13 -05:00
Scott Lahteine
a2babb532d
Merge pull request #7217 from benlye/add-kill-action
...
Add configurable action command to send when printer is killed
2017-07-04 16:44:08 -05:00
Petr Zahradník
8c34233452
UTF-8 mapper for Czech
2017-07-04 15:51:23 -05:00
Dave Johnson
20f6676d63
DISABLE_[XYZ] compatibility check
...
DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING
2017-07-03 17:23:53 -07:00
Ben Lye
c28749a567
Add kill action
...
Sends pre-defined string as action command when printer is kill.
2017-07-03 23:45:19 +01:00
Scott Lahteine
df87278fce
Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output
2017-07-03 15:59:06 -05:00
Scott Lahteine
4be8d7720e
Fix spelling of "Chinese"
2017-07-03 15:24:49 -05:00
LVD-AC
567941e341
Fix for issues #6997 and #7152
...
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
2017-07-03 02:53:49 -05:00
Scott Lahteine
57fff2e95e
Merge pull request #7219 from thinkyhead/bf_update_git_scripts
...
Update Marlin+git helper scripts
2017-07-03 01:49:27 -05:00
Scott Lahteine
6a3967ee33
Corrections for probe_pt parameters
2017-07-03 01:34:27 -05:00
Scott Lahteine
534bffa7a9
Correct comment on ABL G29
2017-07-03 01:13:07 -05:00
Scott Lahteine
e1e1a0c344
Provide a default CUSTOM_BOOTSCREEN_TIMEOUT
2017-07-03 01:13:07 -05:00
Scott Lahteine
69297b2d7b
Make all EEPROM optimization options available
2017-07-02 20:47:03 -05:00
Scott Lahteine
d609489b22
Drop setup_homepin
2017-07-02 02:27:09 -05:00
Scott Lahteine
167169e1bf
Sanity check for a real probe with M48
2017-07-02 02:27:09 -05:00
Scott Lahteine
395a9f59ac
Merge pull request #7211 from thinkyhead/bf_lcd_bootscreen
...
Use lcd_bootscreen for both
2017-07-02 02:11:07 -05:00
Scott Lahteine
14663efe0d
Merge pull request #7210 from fiveangle/printrboard_revf_cleanup
...
Printrboard RevF cleanup
2017-07-02 01:02:26 -05:00
Scott Lahteine
ae5923a3d0
Make lcd_bootscreen common to both
2017-07-02 00:47:36 -05:00
Scott Lahteine
859248433f
Patch for gcode debug
2017-07-02 00:47:35 -05:00
Dave Johnson
09c90c2f6c
Printrboard RevF Cleanup
...
-Update Arduino IDE extension descriptions
-Set default motor currents if not defined in Configuration_adv.h
-Support for MINIPANEL LCD
-Support for choosing internal or panel SD
2017-07-01 22:33:39 -07:00
Scott Lahteine
232a10410d
LCD_FOR_MELZI
2017-07-01 22:32:20 -05:00
Scott Lahteine
76c92a1fab
Clean up some trailing spaces
2017-07-01 22:32:20 -05:00
Scott Lahteine
cf96109056
Implement the EEPROM_CHITCHAT option
2017-07-01 21:48:18 -05:00
Scott Lahteine
dcec7178d1
Expose DISABLE_M503 option as a test option
2017-07-01 21:31:28 -05:00
Scott Lahteine
3e78a01262
Merge pull request #7204 from thinkyhead/bf_update_ubl_lcd
...
UBL radar map corrections
2017-07-01 20:59:03 -05:00
Tom
1ff7d10c80
Add configuration for Infitary M508 (i3 clone)
...
Based on Infitary's own firmware settings.
2017-07-01 20:04:08 -05:00
Scott Lahteine
4cb45c10dd
Patch ubl lcd mesh map indentation
2017-07-01 19:47:52 -05:00
Scott Lahteine
abd6ba62b4
Some cleanups for ubl lcd mesh map
2017-07-01 19:47:49 -05:00
Scott Lahteine
f17bae1f70
Changes for ubl_lcd_map_control patch
2017-07-01 19:47:02 -05:00
Tannoo
8e0f3b7eba
UBL radar map corrections
2017-07-01 19:00:44 -05:00
Bob-the-Kuhn
fcceed5be6
intermittent Teensy & G26 compile problem
...
===============================================
also an issue with ubl_motion.cpp
2017-07-01 14:41:24 -05:00
Scott Lahteine
30b327d24c
Finish the solution for #7166
2017-06-29 15:17:39 -05:00
Scott Lahteine
6c97c5595c
Add a sanity check for DELTA_AUTO_CALIBRATION
2017-06-29 15:03:19 -05:00
Bob-the-Kuhn
e6e3132f79
make LETTTER_OFF return values that match param indices range
2017-06-29 09:01:58 -05:00
Bob-the-Kuhn
bfbf5f8200
correct value_bool() when FASTER_GCODE_PARSER is enabled
...
Also corrected compile issue when DEBUG_GCODE_PARSER and
AUTO_BED_LEVELING_UBL are both enabled.
2017-06-28 19:51:08 -05:00
Scott Lahteine
406ef69702
Move Anet A8 config to subfolder
2017-06-28 16:58:57 -05:00
Scott Lahteine
379926961c
Add Anet A6 config, edit Anet A8 config
2017-06-28 16:58:57 -05:00
Scott Lahteine
5b03f23fa2
Bring configurations up to date, fix some comments
2017-06-28 16:41:49 -05:00
Scott Lahteine
e3cedfa0ec
Fix a compiler warning
2017-06-28 16:41:46 -05:00
Scott Lahteine
bb0508b6cf
Fix comment in M115 code
2017-06-28 13:08:33 -05:00
Scott Lahteine
85777a56c6
Add A (action) and E (echo) parameters to M118
2017-06-28 02:07:59 -05:00
Scott Lahteine
d1e8d4cd9d
Merge pull request #7167 from thinkyhead/bf_20x4_lcd_update
...
UBL Map Cleanup and LCD display
2017-06-28 01:20:22 -05:00
Scott Lahteine
b492e0878d
Changes to reduce and simplify
2017-06-28 01:10:30 -05:00
Ben Lye
98d362c2da
Adding M118 command to send text to serial
...
Allows the user to send text to the serial console in order to
communicate with a host - sending debuging information or action
commands, for example. Text must begin with '//' and this is added if
it is not already present at the beginning of the string.
2017-06-28 00:55:20 -05:00
Tannoo
80abc872f3
Updated to better support the coming "radar"
2017-06-27 22:51:58 -05:00
Tannoo
e90cbf5c16
UBL Map Cleanup
2017-06-27 22:51:58 -05:00
Scott Lahteine
fc140c4962
Followup for I2C_POSITION_ENCODERS
2017-06-27 20:46:40 -05:00
Scott Lahteine
f4246dc8ff
Merge pull request #7165 from thinkyhead/bf_parser_shorthand
...
Use parser.seenval, add shorthand functions
2017-06-27 18:57:48 -05:00
Scott Lahteine
bd776df8c1
Optimize seen_axis by moving 'X' to index 24
2017-06-27 18:47:11 -05:00
Scott Lahteine
05449cf6ee
Add shorthand value accessors to gcode.h
2017-06-27 18:39:41 -05:00
Scott Lahteine
12f092c812
Cleanups to gcode.h, use seenval()
2017-06-27 17:57:00 -05:00
Scott Lahteine
941943c167
Apply const, spacing, etc.
2017-06-27 05:23:49 -05:00
Scott Lahteine
5b11b33854
Add support for Průša MK2 Multiplexer
2017-06-27 04:55:30 -05:00
Scott Lahteine
a4a587a897
Fix spelling of Průša
2017-06-27 04:46:46 -05:00
Scott Lahteine
ba1706a265
Fix spacing in gcode.cpp
...
Followup to #6940
2017-06-27 04:46:46 -05:00
Scott Lahteine
c2c8aafda2
Merge pull request #7157 from thinkyhead/bf_g33_f_parameter
...
G33 F and Height bug fix
2017-06-27 04:36:22 -05:00
Scott Lahteine
627afb29df
Merge pull request #7109 from tnw513/fix-italian
...
added missing italian translation
2017-06-27 04:12:30 -05:00
Scott Lahteine
f0f9fb7465
Remove line that does nothing
2017-06-27 04:08:50 -05:00
LVD-AC
99592c8458
Update G33: Add F, fix height bug
2017-06-27 04:02:02 -05:00
Ben Lye
31514f453a
Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug
...
Can't compile with PINS_DEBUGING enabled on Atmega1284p because it tries
to enumerate pins 46 and 47 (which don't exist) because `#ifdef
AVR_AT90USB1286_FAMILY ` doesn't work as expected.
2017-06-27 08:04:40 +01:00
Scott Lahteine
134116b874
Merge pull request #7153 from thinkyhead/bf_czech_update
...
Updated Czech language
2017-06-26 17:34:15 -05:00
Petr Zahradník
e80958b631
CZ Translate BLTouch and UBL
...
Fixup length
2017-06-26 16:15:31 -05:00
Scott Lahteine
fe7e890b09
Fix issues with ADC_KEYPAD
...
Fixes #7150
2017-06-26 16:08:31 -05:00
dot-bob
a1632cfa0a
Added option 'H' to G29 P4.
...
- Added `H` to set a nozzle height adjustment to surface of the bed.
- Updated G29 P4 comments to reflect changes.
2017-06-25 17:14:08 -05:00
Scott Lahteine
e687782875
Merge pull request #7134 from thinkyhead/bf_skynet_a3_ready
...
Add Skynet/ANET A10 support
2017-06-25 14:35:22 -05:00
dot-bob
b3c36c98fd
Edit digipot currents via LCD, save to EEPROM
2017-06-25 01:02:36 -05:00
Scott Lahteine
3c7bfe798d
Various cleanups ahead of digipot save
2017-06-24 23:56:24 -05:00
Bob-the-Kuhn
9651d01e1a
Add Skynet/ANET A10 support
2017-06-24 19:07:03 -05:00
Scott Lahteine
eb314373bb
Config spacing & consistency, group custom LCDs
2017-06-24 14:33:40 -05:00
Scott Lahteine
6c45fa7dcc
Apply #elif in LCD conditionals
2017-06-24 13:56:33 -05:00
Scott Lahteine
afbc6e3e2f
Update DELTA/SCARA config comments
2017-06-24 12:47:17 -05:00
Paweł Stawicki
1e47c17b46
Fix: set digipot mcp4018 Vrefmax to 1.666V
2017-06-24 12:35:34 -05:00
Scott Lahteine
80a232419d
CNC workspace planes and 'P' argument for G2/G3
2017-06-23 14:53:03 -05:00
Scott Lahteine
5fb0d401eb
Formatting tweaks
2017-06-23 14:53:02 -05:00
Scott Lahteine
ed04d0b6be
Label DualXMode enums
2017-06-23 14:53:02 -05:00
Scott Lahteine
786cdea124
Ensure REPRAPWORLD_KEYPAD_MOVE_STEP is defined
2017-06-23 14:53:01 -05:00
Scott Lahteine
ee7163fd3a
Fix pinsDebug compile errors
2017-06-23 14:53:01 -05:00
Scott Lahteine
a9f8e518bf
Fix FILAMENT_WIDTH_SENSOR infinite loop issue
...
Addressing #6992 and #5851
2017-06-23 14:53:01 -05:00
Scott Lahteine
254a11b083
Merge pull request #7120 from thinkyhead/bf_sainsmart_link
...
Add link to F. Malpartida LiquidCrystal library
2017-06-22 14:04:23 -05:00
Scott Lahteine
aeb6d465a4
Merge pull request #7118 from thinkyhead/bf_french_update
...
French update
2017-06-22 13:10:07 -05:00
Bob-the-Kuhn
325f09ea6c
Add link to custom LiquidCrystal library by F. Malpartida
2017-06-22 13:07:08 -05:00
MagoKimbra
d26c8cc5c8
fix_planner_refresh_e_positioning ( #7103 )
...
* fix_planner_refresh_e_positioning
* Fix
2017-06-22 12:59:22 -05:00
Gege2B
c7f04fbcc7
French translation
2017-06-22 12:49:23 -05:00
Silvio Didonna
4171520729
added missing italian translation
2017-06-21 11:08:39 +02:00
Bob-the-Kuhn
41bfff14e2
Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping
...
Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check
2017-06-20 16:36:22 -05:00
Scott Lahteine
424d0bae8b
Merge pull request #7100 from thinkyhead/bf_HAL_prepare
...
Apply maths macros and type changes ahead of HAL
2017-06-20 01:15:23 -05:00
Scott Lahteine
5c59ee4e93
Use current (raw) Z if omitted from G29 WXY or G29 WIJ.
2017-06-20 00:10:52 -05:00
Scott Lahteine
37bc0fce62
Make G29 compatible with M206 Z and G92 Z
...
Use the raw position for mesh measurement. Otherwise the `M206` and
`M92` Z offsets will get canceled out by bed leveling. The downside is
`G29` will not compensate for a poorly set small `M206` fudge value.
To elaborate on this issue, imagine you are probing with a Z home
offset of -0.1, meaning when Z homes, -0.1 is the current position,
implying the ideal bed zero for the nozzle is 0.1mm higher than the Z
endstop. Ordinarily when printing, Z would raise 0.1mm higher.
What happens when we probe is that all points are measured with that
-0.1 included. So when bed leveling is enabled the `M206 Z` offset gets
exactly canceled out by the bed readings.
2017-06-20 00:09:59 -05:00
Scott Lahteine
6c45d0fd81
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
Scott Lahteine
8a51e2960c
Improve the experience of editing steps_per_mm
2017-06-19 22:17:15 -05:00
Scott Lahteine
725d9d9a56
Fix and improve LCD value editing display
...
- Fix: When "100.0" changes to "99.0" the LCD shows "199.0"
- Use 2 rows if needed on character LCD, (allowing longer labels…
Germany, et. al.)
- Known issue: A certain length label combined with a certain value
drawing function could, for example, display 99.0 on 1 line, but 100.0
on two lines. Workaround would be to pass a nominal value size argument.
2017-06-19 22:17:15 -05:00
Scott Lahteine
499bb85a95
Clean up, put ubl menu itemization closer at hand
2017-06-19 22:17:14 -05:00
Tannoo
90f5f82926
Step-by-Step Menu addition
2017-06-19 20:15:11 -05:00
Scott Lahteine
0c616700f3
Merge pull request #7097 from thinkyhead/bf_dac_percents_fix
...
Convert DAC percent to uint8_t
2017-06-19 17:58:55 -05:00
Florian Heilmann
6dcf42f1a7
Add Z Fade Height to M420 output if it is enabled ( #7042 )
...
* Add Z Fade Height to M420 Output
Echo the z-fade height when M420 is called, if it is enabled.
* Fix Whitespace
* Fix Compiler complaint
* Missing semi-colon
2017-06-19 17:53:07 -05:00
Bob-the-Kuhn
a1c65fd3d5
convert DAC percent to uint8_t
...
=====================
add test to Travis
2017-06-19 17:46:41 -05:00
Scott Lahteine
907cafcbfd
Support for two switching extruders
2017-06-19 17:20:59 -05:00
Ross Allan
cfcd069501
Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0
2017-06-19 14:02:17 -05:00
Scott Lahteine
b8b7ef1902
Merge pull request #7090 from thinkyhead/bf_italian_refix
...
Fix Italian language mapper
2017-06-19 09:27:13 -05:00
Scott Lahteine
42f7f9e013
Merge pull request #7060 from bgort/i2cpefix
...
I2C Position Encoders Example Configs
2017-06-19 01:08:42 -05:00
Scott Lahteine
0b49bddec2
Fix Italian language mapper
2017-06-19 01:01:40 -05:00
Silvio Didonna
2e26a7c752
Added missing Italian translations
2017-06-18 23:37:48 -05:00
Scott Lahteine
4c3dc8bf07
Remove set_current_to_destination from resume_print
...
Addressing #7057
2017-06-18 23:01:13 -05:00
Scott Lahteine
4857a3ba48
Formatting and spelling
2017-06-18 23:01:12 -05:00
Thomas Moore
3d24c329af
M600 fixes
2017-06-18 23:00:56 -05:00
Bob-the-Kuhn
8fb30aaed6
warn user of an invalid combination
2017-06-17 15:04:47 -05:00
Bob-the-Kuhn
6cb9bb27fe
Move lcd_refresh_zprobe_zoffset definition
2017-06-16 21:46:33 -05:00
Scott Lahteine
d4270f15a9
Spacing tweak in setup()
2017-06-16 14:21:05 -05:00
Scott Lahteine
c61c0a9aeb
Fix status message missing "blink"
2017-06-16 14:18:19 -05:00
Scott Lahteine
062131554f
Followup to #7045
2017-06-16 14:18:19 -05:00
Jim Brown
3d043976f7
Add option to disallow filament change without homing first
2017-06-16 13:32:17 -05:00
Scott Lahteine
93da4e83f7
One more space on a short status message
2017-06-16 12:58:25 -05:00
Scott Lahteine
7c95f762f2
Show LCD bed options even without thermal protection
2017-06-15 15:29:56 -05:00
Scott Lahteine
92eb55f246
Reject generous donation of trailing whitespace
2017-06-15 15:25:24 -05:00
Scott Lahteine
428be27893
Formatting adjustments
2017-06-15 15:25:24 -05:00
Scott Lahteine
8d5a37fb3d
Support for a 5th stepper in stepper code
2017-06-15 15:25:23 -05:00
Scott Lahteine
7769a22064
Tweaks to temperature code
2017-06-15 15:25:23 -05:00
Scott Lahteine
d9da126776
Cleanups for UBL / ultralcd.cpp
2017-06-15 15:22:36 -05:00
Scott Lahteine
499d5c3b24
Fix scrolling lcd message for DOGM
2017-06-15 15:07:39 -05:00
Scott Lahteine
7164fd499e
Tweak to G33 P error
2017-06-15 14:43:40 -05:00
Scott Lahteine
c10d763d98
Simpler prepare move conditions
2017-06-15 14:43:40 -05:00
Scott Lahteine
4ebff8eaa5
Drop fastio timer cruft
2017-06-15 14:43:40 -05:00
Scott Lahteine
09bc34f4dc
Allow arbitrarily long retraction
2017-06-15 14:43:30 -05:00
Scott Lahteine
4414825e0d
Merge pull request #7038 from thinkyhead/bf_PCA9632
...
PCA9632 PWM color LED support
2017-06-15 14:41:24 -05:00
Bob-the-Kuhn
9dda022705
fix compile errors
...
================================
Changed to conditional compile for AT90USB issue
2017-06-15 13:18:14 -05:00
Bob-the-Kuhn
b3338ccb01
Merge pull request #6954 from Bob-the-Kuhn/Software-SPI-for-all-CPUs
...
SD card soft SPI - allow all CPU families to use it
2017-06-15 01:03:39 -05:00
Brian
40bb0cbf7a
example configurations, etc.
2017-06-14 18:04:28 -04:00
Jim Brown
26d20ebcfc
Don't allow filament change without homing first ( #7054 )
2017-06-13 17:11:37 -05:00
Roxy-3D
824f71d503
LCD Panel Interactive Mesh Editing ( #7045 )
...
Original Mesh Bed Leveling replacement put at top of UBL Menu Options to
help facilitate the removal of the Original Mesh Bed Leveling.
Radar display (and control) of the UBL Interactive Mesh Editing.
2017-06-12 18:26:49 -05:00
Scott Lahteine
445227c807
Fix missing LCD_STR_REFRESH
2017-06-12 01:28:52 -05:00
Scott Lahteine
699aa35df6
Code cleanup for G33
2017-06-12 01:25:40 -05:00
dot-bob
0bc66bf22c
PCA9632 PWM color LED support
...
Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.
2017-06-12 01:09:24 -05:00
Luc Van Daele
896dfa0577
G33 eccentric probe fixes ( #6850 )
...
* excentric probe config fix
* undo last commit
* eccentric probe fix
* oops
* !stow after each probe
* deploy/stow fix
* E parameter + bit of cleanup
* comment
* LCD menu fix
2017-06-12 01:07:19 -05:00
Thomas Moore
e47029199e
Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF ( #7000 )
...
* Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF
* Add HEATER_IDLE_HANDLER conditional
2017-06-12 00:22:31 -05:00
Scott Lahteine
8326c1c279
Merge pull request #7005 from Diederikvanderpant/bugfix-1.1.x
...
added shift register pins for reprapworld keypad v1.1
2017-06-11 23:12:11 -05:00
Scott Lahteine
07f8da36d2
CL-260 configs
2017-06-11 19:40:13 -05:00
Scott Lahteine
dce665a083
Merge pull request #7025 from magnuspub/patch-1
...
Mod in language_it.h
2017-06-11 19:09:46 -05:00
Scott Lahteine
7b09ab6bda
Merge pull request #7033 from Bob-the-Kuhn/pinsDebug-&-dac_mcp4728-fixes
...
Fix pinsDebug problem & add capability to display more than 70 pins
2017-06-11 19:09:09 -05:00
Scott Lahteine
5bdb4bbc5e
Merge pull request #7030 from thinkyhead/bf_circular_scroll
...
Circular scrolling of the status message
2017-06-11 19:07:38 -05:00
Federico
772275ab0c
Create language_it.h
2017-06-11 10:37:34 +02:00
Bob-the-Kuhn
11e28f389e
fix pinsDebug.h error, add capability to display more than 70 pins.
2017-06-10 22:01:15 -05:00
Scott Lahteine
21217d53df
Circular scrolling of the status message
2017-06-10 20:56:00 -05:00
Scott Lahteine
da8e946efb
Reduce size of heater state print code
2017-06-10 20:26:17 -05:00
Scott Lahteine
dde8bb7c8b
Fix extrude_min_temp compiler warning
2017-06-10 20:07:36 -05:00
Scott Lahteine
83263076dc
Merge pull request #7014 from fiveangle/fix_get-set_DrvPct_declarations
...
fix get/setDrvPct declarations
2017-06-10 19:06:50 -05:00
Scott Lahteine
57a51fd5db
Tweak some else clauses
2017-06-10 16:40:10 -05:00
Scott Lahteine
fc89de6d8b
Followup to German language update
2017-06-10 16:27:39 -05:00
Federico
92011e3d8c
Create language_it.h
2017-06-10 21:50:14 +02:00
Dave Johnson
7864b133a8
Fix get/setDrvPct declarations
2017-06-09 20:21:28 -07:00
Scott Lahteine
0b6b7c9c7e
Merge pull request #7013 from thinkyhead/bf_german_update
...
Update language_de.h
2017-06-09 21:41:19 -05:00
Scott Lahteine
f17a3c2474
Merge pull request #6889 from thinkyhead/bf_at90usb_mapping
...
Unify all AVR90USB pin mappings
2017-06-09 21:00:13 -05:00
Kai
5a72b6818e
update language_de.h
...
Following #6990 some more translations and some grammar fixes
2017-06-09 19:45:09 -05:00
Scott Lahteine
4cc5444144
Merge pull request #7008 from Bob-the-Kuhn/Z_MIN_PROBE_ENDSTOP-and-Z_MAX_PIN
...
Can't use "#define Z_MIN_PROBE_PIN Z_MAX_PIN" in configuration.h
2017-06-09 19:42:56 -05:00
Scott Lahteine
51bc50214a
Save 8 bytes of SRAM
2017-06-09 19:20:16 -05:00
Scott Lahteine
748bf32388
Unify AVR90USB: pinsDebug changes
2017-06-09 19:20:16 -05:00
Scott Lahteine
5426fc1735
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
Scott Lahteine
87d8223251
Unify AVR90USB: Pins remap to Arduino
2017-06-09 18:48:12 -05:00
Scott Lahteine
b378deaf89
Unify AVR90USB: fastio changes
2017-06-09 18:21:57 -05:00
Scott Lahteine
e94f79ccea
Patch some serial macros
2017-06-09 17:17:23 -05:00
Scott Lahteine
d91710e9aa
Followup for UBL translated strings
2017-06-09 16:59:26 -05:00
Scott Lahteine
761df686bd
Minor cleanup in gcode.h
2017-06-09 16:59:26 -05:00
Thomas Moore
897bc2ac1f
Updates for ensure_safe_temperature ( #6963 )
...
* Updates for ensure_safe_temperature
* M600 fixes
2017-06-09 15:19:08 -05:00
Bob-the-Kuhn
1c107b3949
delete problem line
2017-06-09 11:53:36 -05:00
Diederik van der Pant
5b270417ed
added shift register pins for reprapworld keypad v1.1
...
I recently upgraded my Marlin to V1.1.x and decided to publish my fix to make marlin compile properly when #define board megatronics 2 in combination with #define reprapworld keypad v1.1. It was previously described in the comments of a closed pull request. MarlinFirmware#472. All the buttons on the keypad are now operational.
2017-06-09 14:17:47 +02:00
bgort
2f55870edb
[New Feature] I2C position encoder support ( #6946 )
...
* [New Feature] I2C position encoder support
I plan to continue improving/cleaning this up, as there areas that need work.
* let the cleanups begin.
* progress
* more progress
* comments, rename files, etc.
* clean
* Cleanups per thinkyhead
* a few more cleanups
* cleanups, bugfixes, etc.
* remove unnecessary passes_test(), additional cleanups/optimizations
* cleanups
* misc.
* Fix up I2CPEM.init() and a few other things.
* organize, fix, rename, etc.
* more optimization
* a few more tweaks
2017-06-09 08:06:23 -04:00
Bob-the-Kuhn
28d72f48f1
change to DWORD
2017-06-08 16:15:02 -05:00
Bob-the-Kuhn
8d1d9040b6
add static
2017-06-08 14:59:21 -05:00
Bob-the-Kuhn
a17ffe1ece
Merge pull request #6985 from Kaibob2/patch-1
...
Fix for #6980 (case_light compile problem when EXTENDED_CAPABILITIES_REPORT is enabled)
2017-06-08 11:18:56 -05:00
Tannoo
731c8e6372
Translatable Strings for ubl_G29 ( #6990 )
2017-06-08 10:09:39 -05:00
Kai
abb6b8ad54
update language_de.h ( #6986 )
...
There was quite a lot to translate this time. I'm not absolutely confident with the whole UBL stuff and it's a PITA to translate. I don't use any kind of levelling myself as i just have a perfectly level cast aluminium plate as bed.
So maybe someone who really uses it might take a closer look at it after it's merged.
2017-06-08 10:04:52 -05:00
Kai
c2eff60d3f
Fix for #6980
...
Line 7830 prevented successfull compilation when #define CASE_LIGHT_ENABLE is uncommented
2017-06-08 09:19:04 +02:00
Scott Lahteine
1419126721
Merge pull request #6965 from thinkyhead/bf_save_more_sram
...
Use createChar_P to save SRAM in bootscreen
2017-06-07 17:34:19 -05:00
Scott Lahteine
a453be7357
Merge pull request #6973 from bgort/autoreportT
...
Enable AUTO_REPORT_TEMPERATURES by default
2017-06-07 17:33:40 -05:00
Scott Lahteine
1d615e0a67
Merge pull request #6976 from Tannoo/Leveling_in_About_Printer
...
Leveling type in About Printer
2017-06-07 17:26:21 -05:00
Scott Lahteine
707707d71a
Fix LCD status message padding
2017-06-07 16:07:38 -05:00
Scott Lahteine
e556ab1dff
Find three-point leveling points on Delta
2017-06-07 16:07:38 -05:00
Scott Lahteine
a27b08e6af
Various code style tweaks
2017-06-07 16:07:38 -05:00
Scott Lahteine
dac29e0f75
Cleaner failure of UBL without EEPROM
2017-06-07 16:07:38 -05:00
Scott Lahteine
9128d9ab45
Improve sanity checks with static_assert, organize
2017-06-07 16:07:38 -05:00
Scott Lahteine
6bb05c4543
Save 20b in smart_fill_mesh with PROGMEM
2017-06-07 16:07:38 -05:00
Scott Lahteine
b7dc4d9973
Save 92b PROGMEM, 14b SRAM with extruder auto fan
2017-06-07 16:07:38 -05:00
Scott Lahteine
c9e3caf928
Save lots of PROGMEM, ~20b SRAM with DIGIPOT_I2C
2017-06-07 16:07:38 -05:00
Scott Lahteine
4134a6b526
Save 88b PROGMEM, 48 bytes SRAM in settings.reset
2017-06-07 16:07:38 -05:00
Scott Lahteine
36cc03a9b4
Save 224b PROGMEM, 48b SRAM in get_homing_bump_feedrate
2017-06-07 16:07:38 -05:00
Scott Lahteine
2a41f0ff84
Save 28b PROGMEM in ultralcd.cpp (line_to_current)
2017-06-07 16:07:38 -05:00
Scott Lahteine
e6d10f6ddd
Spend 48b PROGMEM to save 16b SRAM
...
...by moving `homing_feedrate_mm_s` to PROGMEM.
2017-06-07 16:07:38 -05:00
Scott Lahteine
97e13a30ba
Save over 100 bytes SRAM in pin_is_protected
2017-06-07 16:07:38 -05:00
Scott Lahteine
45c74406cf
Recover 32 bytes of SRAM in Marlin bootscreen code
2017-06-07 16:07:38 -05:00
Scott Lahteine
e1c5a43247
Cleanup stepper current control config options
2017-06-07 16:07:38 -05:00
Scott Lahteine
efc198f952
Spacing, const, comments
2017-06-07 16:07:38 -05:00
Scott Lahteine
4406fba994
Fixes #6975
2017-06-07 11:14:30 -05:00
Scott Lahteine
d28f5d8a78
Fix: z_endstop_adj is never initialized
2017-06-07 10:29:56 -05:00
Scott Lahteine
5d5ff36446
Fix a compile error with _lcd_set_z_fade_height
2017-06-07 10:29:56 -05:00
Tannoo
b88957e0d4
Leveling type in About Printer
...
Show the Leveling system in use on the About Printer screen.
2017-06-07 06:28:33 -06:00
Brian
dd071a4a65
Enable AUTO_REPORT_TEMPERATURES by default
2017-06-07 02:52:35 -04:00
bgort
8db1197c9b
Enable extended capabilities report by default ( #6969 )
...
Ref #5139
2017-06-07 02:36:34 -04:00
bgort
82e662fc69
Remove requirement for LCD when UBL is used. ( #6971 )
...
* Remove requirement for LCD when UBL is used.
* fix previous oversights
* further refinement - error messages for P2 & P4
* require R on G26 when not using LCD; default to all points
2017-06-07 02:24:36 -04:00
Tannoo
2c2b991b59
UBL Manual Build Menu Option ( #6972 )
...
One click option to manually build UBL mesh.
2017-06-06 22:14:18 -05:00
Roxy-3D
0dd0033b33
Save up to 94 bytes of RAM on 20x4 LCD Display machines ( #6964 )
...
* Save up to 94 bytes of RAM on 20x4 LCD Display machines
Moved the custom screen characters out of RAM into Program Memory. With
SD-Card support and the Progress Bar enabled, this saves 94 bytes of RAM
memory.
This was tested using the example_configurations/FolgerTech-i3-2020
files. So a couple small changes to those files snuck into this Pull
Request.
Probably... We can find similar savings in the Graphics LCD code it we
comb through it. And if so... That is the place we really need to
save RAM memory!
* Tidy up white space and indentation
2017-06-05 17:02:00 -05:00
Bob-the-Kuhn
ba0bd33c38
Removed check for 2560 family
2017-06-04 22:16:27 -05:00
Scott Lahteine
04b07a6ecc
Unused var in Stepper
2017-06-04 17:25:16 -05:00
Scott Lahteine
eb8af486d2
Ensure safe temperature for M600
2017-06-04 17:25:16 -05:00
Scott Lahteine
bfe7fbe5c0
Maintain message scroll rate
2017-06-04 17:25:15 -05:00
Scott Lahteine
6411d65c48
Fix Morgan SCARA S2 calculation
2017-06-04 12:24:09 -05:00
Scott Lahteine
46752588b9
Merge pull request #6948 from Bob-the-Kuhn/redundant_temperature
...
fix redefinition errors for redundant_temperature
2017-06-04 12:16:09 -05:00
Scott Lahteine
5938dae200
Merge pull request #6950 from MagoKimbra/fix_g29_3_point
...
Fix G29 with 3 point
2017-06-04 12:15:44 -05:00
Scott Lahteine
c5e0f08e35
Merge pull request #6951 from fixoid/patch-4
...
Initializing extruder/nozzle servo when turning on the printer
2017-06-04 12:13:05 -05:00
Scott Lahteine
e4937b0285
Cleanup of spacing and formatting
2017-06-04 11:31:43 -05:00
fixoid
1aab9906e6
Initializing extruder/nozzle servo when when turning on the printer
2017-06-04 16:57:24 +03:00
MagoKimbra
663ff7f92a
Fix G29 with 3 point
2017-06-04 14:39:31 +02:00
oldmcg
9f295581f0
Ubl delta fixes and improvements ( #6941 )
...
* Change all direct changes of ubl.state.active to
set_bed_leveling_enabled() which handles apply/unapply
leveling to maintain current_position consistency.
Fix invalidation of UBL mesh to invalid unreachable
mesh points as well (delta corners).
Fix UBL_DELTA unapply_leveling logic and when
it gets applied, including fade_height changes.
Add optional M114 D for detailed position information,
disabled from compilation by default (M114_DETAIL).
* UBL_DELTA raw and inline kinematics
* UBL planner fall through fix
* consistent variable names
* Cleanup orphaned code and whitespace changes.
Use _O2.
* compile warnings cleanup
* Remove redundant #ifdef condition
2017-06-03 17:11:43 -05:00
Bob-the-Kuhn
c34d7a29a6
fix redefinition errors for redundant_temperature
...
Removing redundant_temperature from public section and leaving it in the
private section
2017-06-03 16:40:14 -05:00
Bob-the-Kuhn
6a5d3b580d
fix "hex_address not defined" when UBL is enabled
2017-06-03 13:19:55 -05:00
Scott Lahteine
789b2928a8
Tweak scrolling message code
2017-06-02 23:45:53 -05:00
Scott Lahteine
fc7d7f87b4
Init probe test pin with FastIO
2017-06-02 23:45:52 -05:00
Scott Lahteine
0282452cea
Make Parser::seen volatile
2017-06-02 23:45:52 -05:00
Scott Lahteine
9a305a467b
Patch LCD Contrast menu item
2017-06-02 23:45:52 -05:00
Scott Lahteine
90ccac4bcf
Clean up after recent commits
2017-06-02 23:45:52 -05:00
Bob-the-Kuhn
2130f10de8
allow space between parameter and value
2017-06-02 19:57:22 -05:00
Bob-the-Kuhn
ebda4663c3
for discusion
2017-06-02 19:42:43 -05:00
FATALHERMIT
911079104e
Support for ZRIB v2.0 Control Board
2017-06-02 12:05:46 -05:00
Scott Lahteine
65a0212866
Easier override of FILWIDTH_PIN
2017-06-02 12:05:46 -05:00
Scott Lahteine
147d9d76fc
Merge pull request #6928 from Bob-the-Kuhn/Fix-case-light-logic-on-Azteeg-X3-boards
...
Fix case light logic on Azteeg_X3 boards.
2017-06-01 20:14:15 -05:00
guntherv73
4288c4fb4f
Configurations for Malyan M150
2017-06-01 19:26:29 -05:00
Scott Lahteine
1919cb0d1e
Config cleanups
2017-06-01 19:26:16 -05:00
Bob-the-Kuhn
9a9bbfc57c
Fix case light logic on Azteeg_X3 boards.
2017-06-01 12:33:24 -05:00
Thomas Moore
a32f7b329c
Fix heater status display for advanced pause
2017-06-01 12:29:47 -05:00
Scott Lahteine
445865ea03
REPRAPWORLD_KEYPAD is NEWPANEL but not ULTIPANEL
2017-05-31 23:48:03 -05:00
Scott Lahteine
4296a8b74e
For status scrolling, pad a short message
2017-05-31 23:48:03 -05:00
Scott Lahteine
4a96433b7e
Simplify counting of printable characters
2017-05-31 23:45:41 -05:00
Scott Lahteine
8d69394ae1
Fix LCD printing of progmem strings
2017-05-31 23:36:57 -05:00
Scott Lahteine
c74d4dede6
Prevent illegal leveling combinations
...
Addressing issue #6901
2017-05-31 23:36:57 -05:00
Scott Lahteine
155aa62fb0
Merge pull request #6912 from thinkyhead/bf_better_pulse_delay
...
Account for dual XYZ in pulse delay cycles estimate
2017-05-31 22:21:47 -05:00
Scott Lahteine
a5fa586642
Preferred patch to gcode.h
2017-05-31 21:18:16 -05:00
Bob-the-Kuhn
1b41e1f645
another compile error
...
only seen if
#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
...
#if
ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)
2017-05-31 13:59:49 -05:00
Bob-the-Kuhn
65bd4c8c94
Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x)
...
M355 case light improvements (replaces PR #5685 )
2017-05-31 13:33:59 -05:00
Bob-the-Kuhn
9657e7d3ee
copied file changes from PR #5685
...
==============================
Configuration_adv.h changes
==============================
add "live" LCD update
==============================
P & S version
==============================
final (hopefully) tested version
==============================
update M115 capabilities print
==============================
Menu changes portion of the requested changes
==============================
changed USEABLE_HARDWARE_PWM from a function to a series of macros
==============================
changes per review
2017-05-31 13:22:38 -05:00
Bob-the-Kuhn
8206bb9bb9
fix compile error
...
invalid conversion from 'const char*' to 'char*' [-fpermissive]
2017-05-31 13:17:01 -05:00
Scott Lahteine
df91346188
Account for dual XYZ in pulse delay cycles estimate
2017-05-31 12:23:28 -05:00
Scott Lahteine
7236109f2a
Patch M24 / M125 for delta
2017-05-30 23:07:29 -05:00
Scott Lahteine
be17033762
Fix case light menu toggle
2017-05-30 14:03:45 -05:00
Scott Lahteine
89b93058e3
Merge pull request #6887 from christianh17/PR-sanitycheck
...
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
2017-05-30 13:43:39 -05:00
Scott Lahteine
05b66234ae
Merge pull request #6895 from thinkyhead/bf_user_commands
...
Custom user commands menu
2017-05-30 13:40:50 -05:00
Scott Lahteine
84a0a77c59
Merge pull request #6852 from tcm0116/mixing_extruder_lin_advance
...
Generate error if MIXING_EXTRUDER and LIN_ADVANCE are both enabled
2017-05-30 13:37:51 -05:00
Scott Lahteine
266ae8912a
Formatting in _draw_heater_status
2017-05-30 03:32:16 -05:00
Scott Lahteine
6b9ca16f36
Patch lcd_print edge limit code
2017-05-30 03:32:15 -05:00
Tannoo
74d6dee920
User Command (Script) Menu
...
The menu (commands / scripts) is configurable in `Configuration_adv.h`.
- Added conditionals.
- Changed script handling.
- Slimmed and working!
- Added Status message.
- Returning to lcd status screen now!
- Example Configs Updated.
- Cleanups by @thinkyhead
2017-05-30 02:33:57 -05:00
Scott Lahteine
d9c8072037
Edit PROPORTIONAL_FONT_RATIO comment
2017-05-30 01:29:39 -05:00
Scott Lahteine
46b32e4548
Cleanup LCD interface, add lcd_reset_status
2017-05-29 22:16:13 -05:00
Scott Lahteine
ca99d67ede
Fix UBL "Info screen" menu items
2017-05-29 19:55:26 -05:00
Scott Lahteine
2c7a39bc0e
Fix LCD print aborted message
2017-05-29 19:52:01 -05:00
Scott Lahteine
0f1e8c195d
Draw on LCD after value has changed
2017-05-29 19:42:30 -05:00
Scott Lahteine
51587c4b43
Rename Feedrate to Velocity to match prior naming
2017-05-29 17:54:15 -05:00
Scott Lahteine
9677f3f2f5
Patch up LCD Bed Leveling menu
2017-05-29 17:51:11 -05:00
Scott Lahteine
fc2eaab7f3
Show home option in level bed menu
2017-05-29 17:51:10 -05:00
Scott Lahteine
c6a7adc293
Patch G29 A and Q arguments to bypass setup
2017-05-29 17:51:10 -05:00
Scott Lahteine
4cece2d72e
Use NAN for G29 W omitted parameters
2017-05-29 17:51:10 -05:00
Scott Lahteine
2d71569138
Fix spacing in JSON output
2017-05-29 17:51:10 -05:00
Scott Lahteine
b2d3c8aedd
Have G28 do a refresh of the display
2017-05-29 17:51:10 -05:00
Scott Lahteine
50ab9c2e04
General cleanup of spacing, comments
2017-05-29 15:34:14 -05:00
Scott Lahteine
f1e33afda4
Return to Bed Leveling menu when done
2017-05-29 15:31:02 -05:00
Scott Lahteine
78d8c598e1
Fix lcd_synchronize with message
2017-05-29 15:31:02 -05:00
Scott Lahteine
eb39d6e3e2
Don't draw progress bar until it has 1%
2017-05-29 15:31:01 -05:00
Scott Lahteine
194f8b2f55
Start at Z=0 in manual probing
2017-05-29 15:31:01 -05:00
Scott Lahteine
6f89db11f0
Allow lcd_setstatusPGM to reset the alert level
2017-05-29 15:31:00 -05:00
Scott Lahteine
3fe333143c
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
Scott Lahteine
d013bddfa8
Merge pull request #6876 from thinkyhead/bf_extend_leveling_menu
...
Extend the ABL/MBL Bed Leveling menu
2017-05-28 14:19:02 -05:00
Scott Lahteine
01e7e234c6
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
Scott Lahteine
0cbe448edf
Split up Control > Motion submenu
2017-05-28 12:52:24 -05:00
Scott Lahteine
a3645ec921
Reference op with variable name
2017-05-28 11:33:22 -05:00
Scott Lahteine
71367fd518
Scrolling status message option
2017-05-28 11:26:28 -05:00
Scott Lahteine
b0eae68f57
Prevent bed temperature being set too high
2017-05-28 11:11:17 -05:00
Scott Lahteine
493f0b0c62
Fix some compiler warnings
2017-05-28 11:06:33 -05:00
christianh17
f379a326cc
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
...
When using switching nozzle it should be possible to disable the servo after move. Do it only if you do not need the servo power to keep the position.
2017-05-28 15:33:28 +02:00
Scott Lahteine
33279a1e02
Code style tweak to gcode.h
2017-05-27 19:47:26 -05:00
Ernesto Martinez
ac959b12ee
Updates to language_es.h based on latest updates. ( #6871 )
...
Spanish language updates
2017-05-27 19:08:39 -05:00
Scott Lahteine
55c700d537
Tweak to gcode.h
2017-05-26 22:11:31 -05:00
Bob-the-Kuhn
868e7db4ae
value check was looking at the code
2017-05-26 14:49:42 -05:00
Thomas Moore
fb5e0ffe16
Unify M600 and M125 pause features ( #6407 )
...
* Unify M600 and M125 pause features
* Cleanup per thinkyhead's comments
* Rename filament_change_menu_response to advanced_pause_menu_response
* Include HAS_BED_PROBE in QUIET_PROBING
* Update gMax example file
* is_idle() is out of scope without the braces
* Convert FT-i3-2020 to Advance Pause names...
* Allow pause even if not printing
2017-05-26 13:01:02 -05:00
Scott Lahteine
b3a97b5013
Patch up LCD level bed menus
2017-05-25 23:53:31 -05:00
Scott Lahteine
78af2b1444
Fix PROBE_MANUALLY via G-code
2017-05-25 23:53:31 -05:00
Scott Lahteine
082da23391
One fewer EOL in M503 output
2017-05-25 23:53:31 -05:00
Scott Lahteine
b15e531464
Fix screen change on character display
2017-05-25 15:29:14 -05:00
Thomas Moore
44e657766e
Add incompatibility error to Sanity Check for MIXING_EXTRUDER and LIN_ADVANCE
2017-05-25 08:06:27 -05:00
Scott Lahteine
735405b2a4
Merge pull request #6848 from thinkyhead/bf_scara_M665
...
Add M665 for SCARA
2017-05-24 20:51:51 -05:00
Scott Lahteine
ffa901f373
Merge pull request #6839 from thinkyhead/bf_day_ending_in_y
...
UBL ultralcd.cpp patches
2017-05-24 17:55:44 -05:00
Scott Lahteine
361cbba113
Use M665 to set SCARA angle offsets
2017-05-24 17:49:24 -05:00
Scott Lahteine
5ed63a5724
Apply const in prepare_kinematic_move_to
2017-05-24 17:49:24 -05:00
Scott Lahteine
5cbe0244c5
Fixes for spindle/laser and SCARA probe bounds
2017-05-24 17:49:23 -05:00
Scott Lahteine
1f52c9f5df
Neater Megatronics 3 pins
2017-05-24 17:49:23 -05:00
Scott Lahteine
af81cb4cbb
Patch for M503 output
2017-05-24 17:49:09 -05:00
Scott Lahteine
1d167a6874
Some cleanup, fixes for ultralcd.cpp UBL code
...
- Free up 30 bytes of SRAM in UBL LCD code
- Fix BUILD_ABS_MESH temperature
- Fix UBL indentation in ultralcd.cpp
- UBL vars lowercase, "convert to positive" sensibly
2017-05-24 01:10:42 -05:00
Scott Lahteine
f4028fe088
New GCode Parser - Implementation
2017-05-23 14:15:10 -05:00
Scott Lahteine
002a06c507
New GCode Parser - Configuration
2017-05-23 14:15:07 -05:00
Scott Lahteine
ad915b667e
One more mesh_index_to_npos update
...
Followup to #6827
2017-05-23 13:02:50 -05:00
Scott Lahteine
2881f0a48d
Fix, extend G42 with P (probe) parameter
...
- Also fix handling of SCARA and misuse of `codenum`.
2017-05-23 04:55:42 -05:00
Scott Lahteine
d252d1b6a2
Merge pull request #6831 from thinkyhead/bf_move_g7
...
Move G7 to G42
2017-05-23 03:02:57 -05:00
Brian
82ca6248e2
Move G7 to G42
...
See: #6777
2017-05-22 23:21:35 -05:00
Scott Lahteine
26ffa558a3
Use redraw flag for both types of LCD
2017-05-22 18:34:54 -05:00
Scott Lahteine
3ff7515527
Merge pull request #6817 from cbusillo/patch-1
...
missing enable for M605 for duplication mode
2017-05-22 18:07:11 -05:00
Scott Lahteine
34cfbc90cd
Use new attribute macros in more places
2017-05-22 17:38:58 -05:00
Scott Lahteine
85b967657e
Embed G26/G29 in ubl class, with enhancements
2017-05-22 17:38:58 -05:00
Scott Lahteine
c99bd69889
Apply const float & more
2017-05-22 17:38:36 -05:00
Scott Lahteine
ad5638f78c
Cleanup some fastio code
2017-05-22 17:38:36 -05:00
Scott Lahteine
e271521c39
Single user_canceled function in G26
2017-05-22 17:38:36 -05:00
Scott Lahteine
c2ea22da49
Clean up whitespace
2017-05-22 17:38:36 -05:00
Scott Lahteine
ceb62fc7e1
Fixes #6828 : M428 bug
2017-05-22 17:34:03 -05:00
oldmcg
48f7652143
UBL G29 -P3.1 smart fill ( #6823 )
...
* UBL G29 -P3.1 mesh fill with distance-weighted least squares fit.
* Back to original -O0 on G29 for now.
2017-05-22 12:33:50 -05:00
Scott Lahteine
850203fb3a
Merge pull request #6816 from thinkyhead/bf_lcd_live_editing
...
Constrain LCD status message rendering
2017-05-22 11:15:35 -05:00
Roxy-3D
3129260c44
Misc. Clean Up ( #6822 )
...
* Misc. Clean Up
Mostly UBL related clean up.
- But fixed a bug in the thermistortables.
- Made G26 more responsive to user aborts.
- Added sanity checks for older name for UBL_MESH_VALIDATION.
- Made G29 P4 able to edit invalidated mesh points
- Restore a reasonable Fade Height for UBL when creating new state information
- Get UBL's Topology Map to look a little bit better
- Make sure the user doesn't see a blank screen when doing Mesh Editing.
* Huh??? GitHub Desktop screwed up!
* get the planner object in scope
* Fix out of scope z_fade_height
* Travis timed out...
I need a change so I can force a new commit and sync.
2017-05-21 22:09:51 -05:00
cbusillo
3b4116e73b
missing enable for M605 for duplication mode
...
I believe gcode_M605 will not be called when using DUAL_NOZZLE_DUPLICATION_MODE without this change.
2017-05-21 13:54:20 -04:00
Scott Lahteine
5e8892d6b5
Show Restore Failsafe item with EEPROM off
2017-05-21 12:52:44 -05:00
Scott Lahteine
76af9ac7c5
tweaks
2017-05-21 12:51:58 -05:00
Scott Lahteine
ba5910ab6c
Constrain LCD status message rendering
2017-05-21 12:35:16 -05:00
MagoKimbra
2c309a8f7c
Fix set_lcd_contrast
2017-05-21 19:01:44 +02:00
Scott Lahteine
22dbb2117c
Merge pull request #6812 from thinkyhead/bf_day_ending_in_y
...
Cleanup code, organize & document fastio pin mappings
2017-05-21 11:39:04 -05:00
Roxy-3D
364f8fb613
Update Configuration.h files to better names ( #6814 )
...
Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION
Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)
2017-05-21 11:10:22 -05:00
Scott Lahteine
d7fda2fe49
Formatting, const in G33
2017-05-21 10:40:05 -05:00
Scott Lahteine
1519b0e7c1
Split up fastio.h, document pin mappings
2017-05-21 10:33:27 -05:00
Scott Lahteine
49599caade
General cleanup to utf_mapper.h
2017-05-21 10:33:27 -05:00
Scott Lahteine
02f15f6775
UBL-related cleanup, spacing, standards
...
Reference: #6804
2017-05-21 10:33:26 -05:00
Scott Lahteine
52e20aeab3
Pins-related cleanup, formatting
2017-05-21 07:18:03 -05:00
Scott Lahteine
ea906e4da7
Merge pull request #6810 from thinkyhead/bf_lcd_live_editing
...
Add "live editing" option to LCD menus
2017-05-21 06:11:52 -05:00
Scott Lahteine
11fc9564c9
Add live editing option to LCD menu
2017-05-21 05:29:46 -05:00
Scott Lahteine
8a0a5cfccc
Temp-related cosmetic changes
2017-05-21 04:49:25 -05:00
Scott Lahteine
b29dbbd5e4
Use uint16_t for temps
2017-05-21 04:48:53 -05:00
Scott Lahteine
ebcd1aaf88
Access hotend/bed temperatures as float
2017-05-21 04:46:31 -05:00
Scott Lahteine
6ce2b1ff4a
G33 evolutionary changes
2017-05-20 19:23:39 -05:00
Scott Lahteine
3c061a9f9a
UBL tabs, whitespace, spelling, etc.
2017-05-19 14:16:50 -05:00
Scott Lahteine
75badae2f8
Disable PROBE_MANUALLY for UBL
...
Plus some other UBL tweaks.
2017-05-19 07:13:18 -05:00
Scott Lahteine
94a4af1d7f
Merge pull request #6773 from thinkyhead/bf_lcd_patch_e5
...
Patch LCD code for 5th extruder
2017-05-18 15:26:55 -05:00
Brian
01f452c37c
Tweak Azteeg X3 PRO _pins.h so Viki2 will work for those without a case light.
...
- add comment explaining that the Panucatt Viki2 wiring diagram uses pin 44
2017-05-18 13:00:13 -04:00
Brian
e09b4ce4a5
Add checking
2017-05-17 19:46:16 -04:00
Brian
13599a73c7
Add G7 gcode command to move between UBL mesh points
...
- can be augmented in the future to enable for other leveling systems
Quite simple, but did not want to modify `G1` as the additional checking would slow it down.
Tested & working.
2017-05-17 19:05:36 -04:00
Brian
43c24f0027
Fix recent regressions, &c.
...
- fix broken `M421` due to less-than-careful optimization
- add HOME_AFTER_DEACTIVATE define to advanced config so not everyone has to rehome after steppers are deactivated
- misc. cleanups (remove unused label, unused variables)
2017-05-17 17:21:46 -04:00
Scott Lahteine
3843a5151a
Patch LCD code for 5th extruder, EEPROM reset
2017-05-17 15:33:51 -05:00
Scott Lahteine
6c064bb7d6
Some probe_pt error-handling
2017-05-17 15:33:51 -05:00
Brian
3370329751
Fix broken EEPROM save/load
2017-05-17 12:41:27 -04:00
Scott Lahteine
f0fe26c411
Ensure Arduino.h and configs are included for serial.cpp
2017-05-17 05:07:35 -05:00
Scott Lahteine
ffb5353294
Merge pull request #6738 from thinkyhead/bf_config_crc_rebase
...
Implement CRC16, develop mesh allocation table
2017-05-17 04:44:00 -05:00
Scott Lahteine
e806e6419a
Merge pull request #6768 from thinkyhead/rc_spindle_m3_m5
...
Spindle / Laser support
2017-05-17 04:39:32 -05:00
Scott Lahteine
d6f49c6626
Merge pull request #6752 from jdelahayes/bugfix-1.1.x
...
Update french language
2017-05-17 04:32:28 -05:00
Scott Lahteine
55a87da036
SPINDLE/LASER implementation
2017-05-17 04:26:15 -05:00
Scott Lahteine
ffe0e2d19a
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
Scott Lahteine
99c4900a98
SPINDLE/LASER config changes
2017-05-17 04:23:06 -05:00
Scott Lahteine
a3abfeac47
Mark strings needing translation
2017-05-17 03:49:33 -05:00
Scott Lahteine
7f4e4b1212
UBL name/state methods
2017-05-17 03:49:32 -05:00
Brian
7852369987
Implement CRC16, develop mesh allocation table
...
- Add crc16 utility function
- Implement CRC16 for config store, remove old checksum, increment layout version
- Move UBL mesh store/load to MarlinSettings; increment UBL_VERSION
- Begin to lay out MAT structure, prototype functions, etc.
- Rename ubl.state.eeprom_storage_slot to .storage_slot
- Misc. optimization
- Cleanup/standardize/improve some messages
This is a work in progress!
2017-05-17 03:49:19 -05:00
Scott Lahteine
00d358d92d
Fix a PROBE_MANUALLY bug in ultralcd.cpp
2017-05-17 03:49:19 -05:00
fixoid
c2321b1cdd
Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER
2017-05-16 19:25:17 -05:00
Scott Lahteine
238fb53617
Patch home_all_axes to ignore G28 XYZ parameters
2017-05-16 16:18:38 -05:00
Scott Lahteine
6b6630e11b
Clean up trailing whitespace and tabs
2017-05-16 16:06:18 -05:00
Roxy-3D
d30e478f97
Fix incorrectly optimized find_closest_mesh_point_of_type() function ( #6761 )
2017-05-16 15:24:24 -05:00
oldmcg
5a9e52a3e0
Use COPY_XYZE macro to copy exactly 4 elements ( #6758 )
...
Fix undefined DELTA_PROBEABLE_RADIUS for UBL_DELTA
2017-05-16 11:47:51 -05:00
Roxy-3D
8606644343
M48 Fix for Delta Configuration Files & UBL G29 only homes when necessary ( #6757 )
...
* Fix M48 for Delta's There was a scope issue: DELTA_PROBEABLE_RADIUS wasn't getting defined.
* Check if the specified G29 command requires homing
2017-05-16 11:23:50 -05:00
Tannoo
0cd398c25d
UBL Menu Updates ( #6751 )
...
Things should be pretty stable for a while.
But it wouldn't surprise me if the Delta people have a need for a few special commands.
2017-05-16 08:45:31 -05:00
Johann Delahayes
a5737cba7c
Update french language
2017-05-16 12:27:42 +02:00
Scott Lahteine
0fef9a2983
Remove "ubl." prefix from calls within ubl method
2017-05-16 01:19:45 -05:00
Scott Lahteine
14a4257c7b
UBL tabs, whitespace, spelling, etc.
2017-05-16 01:19:45 -05:00
Scott Lahteine
56e2e331ed
UBL G29: replace 'O' with 'T'
...
Since we already used 'T' for `G29` Topology Report in the past, and since 'T' is available…
2017-05-16 01:18:41 -05:00
Scott Lahteine
091f94a6bf
Fix up M421 and some comments
2017-05-16 01:14:03 -05:00
Scott Lahteine
4ec4ecff1a
Reduce find_closest_mesh_point_of_type a little
2017-05-16 01:14:03 -05:00
Scott Lahteine
f1a1c6873e
Patch lcd_implementation_status_screen compiler warning
2017-05-16 00:59:50 -05:00
moebyusDev
2266c0780d
fixed spanish lang
...
It was missing MSG_FILAMENT_CHANGE_HEAT_2 and MSG_FILAMENT_CHANGE_HEATING_2
2017-05-16 00:35:36 -05:00
oldmcg
b213a45efb
UBL_DELTA post merge cleanup ( #6705 )
...
* UBL_DELTA post merge cleanup:
fix fade_height, lost during some previous merge
fix float cx,cy which are not const
move repeated z_cxcy calc line inside loop
style fixes and comment fixes/alignment
* Update ubl_motion.cpp
remove unnecessary parentheses
* Update Conditionals_post.h
Change name of define to more accurate meaning:
UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN
which is not and should not be the default for cartesians with UBL.
2017-05-16 00:30:29 -05:00
Roxy-3D
6f86c46fa6
Fix typo that caused scope issues for DELTA ( #6750 )
2017-05-15 23:13:45 -05:00
Roxy-3D
1fbcbc05f6
UBL no longer flout's the sacred GCode standard ( #6745 )
...
Also clean up ubl_motion.cpp debug info and fix declaration of cx & cy
2017-05-15 16:25:01 -05:00
Scott Lahteine
c262ea92e0
Merge pull request #6733 from abusca/Euskera
...
Updated Basque translation
2017-05-15 02:30:11 -05:00
Scott Lahteine
267f77b18b
More constraint on axis_unhomed_error
2017-05-14 16:03:02 -05:00
Aaron Busca
645096b87a
Updated Basque translation
...
Updated Basque translation with new strings.
2017-05-14 18:29:50 +02:00
Roxy-3D
40d95a4e23
Update the gMax files to display better with Proportional Fonts ( #6727 )
...
Update the gMax files to display better with Proportional Fonts
2017-05-13 16:33:04 -05:00
Roxy-3D
c06af63f87
G26's default behaviour ought to be the entire mesh ( #6726 )
...
Adding the capability to specify ahead of time how much of the validation pattern to print made it so by default G26 only did one circle and no connecting lines.
It is more natural for the unsophisticated user to just do the entire mesh (bed). We default the repetition count to GRID_MAX_POINTS+1 to insure we get every last one of them!
2017-05-13 15:53:44 -05:00
Roxy-3D
15040821e0
Setup FolgerTech-i3-2020 files better for the user ( #6724 )
...
UltiPanel was enabled, but technically, it is a REPRAP_DISCOUNT_SMART_CONTROLLER
Either configuration works on the machine. But we want it 'Right'.
Setup the Proportional Font spacing so columns line up nicer on PronterFace and Repetier Host.
2017-05-13 15:14:03 -05:00
Scott Lahteine
67c9b1e332
Update M665 comment, fix M665 code_value code.
2017-05-13 05:11:29 -05:00
Scott Lahteine
37399e3cb5
Fix prepare_move_to_destination_cartesian for UBL
2017-05-13 04:13:19 -05:00
Scott Lahteine
a7fb55ea6d
Use GRID_MAX_POINTS. Some formatting
2017-05-12 06:57:19 -05:00
Scott Lahteine
e51b5774db
Merge pull request #6699 from mtowara/patch-1
...
Bugfix PRINTER_EVENT_LEDS
2017-05-12 05:58:25 -05:00
Scott Lahteine
056350d9bf
Merge pull request #6656 from FHeilmann/fix_fwretract_pos_z_move
...
Fix FWRetract with positive z-moves during retracted state
2017-05-12 05:56:08 -05:00
Scott Lahteine
0e582bcfb7
Fix #6691 - redundant line in M665
2017-05-12 05:17:38 -05:00
Markus Towara
68ae7c8d7a
Bugfix PRINTER_EVENT_LEDS
...
Extra closing curly bracket terminates while loop early if PRINTER_EVENT_LEDS defined
2017-05-12 12:13:23 +02:00
Scott Lahteine
ba29da56e0
Add disclaimer for verboten parameters
2017-05-12 02:34:53 -05:00
Scott Lahteine
0696dda470
Cleanups to UBL_DELTA
2017-05-12 02:34:53 -05:00
Scott Lahteine
cbfca29522
M421 tweaks, just to use const
2017-05-12 01:32:34 -05:00
Scott Lahteine
233f824dd6
Define GRID_MAX_POINTS
2017-05-12 01:32:34 -05:00
Scott Lahteine
b17e2d3dcd
Apply const in Marlin_main.cpp
2017-05-12 01:32:33 -05:00
Scott Lahteine
92fbea2906
Add some GCodes to the header of Marlin_main.cpp
2017-05-12 01:32:33 -05:00
Scott Lahteine
94e90ca26c
Tweak M80/M81 descriptions
2017-05-12 01:32:33 -05:00
Scott Lahteine
ee50dfaaf3
Adjust G26 arguments
2017-05-12 01:32:33 -05:00
Scott Lahteine
b0ba5cae73
Fix a spelling boo
2017-05-12 01:32:33 -05:00
oldmcg
91841d75c9
UBL_DELTA ( #6695 )
...
UBL on Delta's.... Should be close! Should not affect any Cartesian printer.
2017-05-11 22:33:47 -05:00
bgort
445003dbb8
Merge pull request #6694 from bgort/g29p2b
...
UBL: Minor improvement to G29 P2
2017-05-11 20:44:43 -04:00
Brian
5a5dba6fc8
UBL: Minor improvement to G29 P2
...
- allow H code value to override probing height
- minor cleanups
2017-05-11 18:54:34 -04:00
Brian
ae676490c9
M421: Add 'adjust closest point' capability
...
- Split M421 into separate versions for bilinear and ubl
- Fix minor issue in G26
2017-05-11 12:10:38 -04:00
Scott Lahteine
9a688d1456
Merge pull request #6682 from thinkyhead/bf_M80_s_arg
...
"M80 S" to report the state of the PSU pin
2017-05-10 20:29:01 -05:00
Roxy-3D
b63e82f309
M421 Mesh Point Offset and misc. UBL clean up ( #6685 )
...
* M421 Mesh Point Offset and misc. UBL clean up
Allow M421 to accept an offset as well as absolute value for a specified
mesh point.
And misc. UBL clean up to reduce redundent code.
* Better error checking for M421
* Fix M421 Y index bug
I just noticed.... We've had a Y index bug for who knows how long?
2017-05-10 18:54:10 -05:00
Pablo Ventura
539e0c2f31
"M80 S" to report the state of the PSU pin
2017-05-10 17:58:58 -05:00
bgort
df42428281
Merge pull request #6665 from bgort/font
...
Add proportional font adjustment ratio
2017-05-10 17:30:51 -04:00
Brian
2604742191
Add proportional font adjustment ratio
...
- update example configs
2017-05-10 17:19:03 -04:00
bgort
b3407a371b
Merge pull request #6676 from bgort/g26zhop
...
G26: Add 0.5mm Z-bump between circles to minimize pattern scraping
2017-05-10 17:12:05 -04:00
bgort
c33d99c5b2
Merge pull request #6680 from bgort/g26repeat
...
G26: Add 'Repeat' Option
2017-05-10 17:11:34 -04:00
Bob-the-Kuhn
7325035aac
Merge pull request #6637 from Tannoo/UBL_Menu_System_1.1
...
UBL Menu System 1.1
2017-05-10 15:54:48 -05:00
Brian
f7a201b0d0
G26: Add 'Repeat' Option
...
- Allows for specifying number of points to print/validate, using 'R' code like with G29 P4 Rx
- Moved the code for Random to 'M' so we could be consistent with G29 P4
- G26 instructions indenting/cleanup
2017-05-10 16:52:08 -04:00
Brian
9c5957fc77
G26: Add 0.5mm Z-bump between circles to minimize pattern scraping
2017-05-10 16:11:59 -04:00
Brian
4da14b14f4
UBL Cleanup/Bugfix
...
- Fix bug in ubl_line_to_destination
- Improve/fix output of some ubl.h functions
2017-05-10 13:56:17 -04:00
Tannoo
66db6c3acc
UBL Menu System 1.1
...
/**
* UBL System submenu
*
* Prepare
* - Unified Bed Leveling
* - Activate UBL
* - Deactivate UBL
* - Mesh Storage
* Memory Slot:
* Load Bed Mesh
* Save Bed Mesh
* - Output Map
* Map Type:
* Output Bed Mesh Host / Output Bed Mesh CSV
* - UBL Tools
* - Build Mesh
* Build PLA Mesh
* Build ABS Mesh
* - Build Custom Mesh
* Hotend Temp:
* Bed Temp:
* Build Custom Mesh
* Info Screen
* - Build Cold Mesh
* - Fill-in Mesh
* Fill-in Mesh
* Smart Fill-in
* Manual Fill-in
* Info Screen
* Continue Bed Mesh
* Invalidate All
* Invalidate Closest
* - Validate Mesh
* PLA Mesh Validation
* ABS Mesh Validation
* - Custom Mesh Validation
* Hotend Temp:
* Bed Temp:
* Validate Mesh
* Info Screen
* - Edit Mesh
* Fine Tune All
* Fine Tune Closest
* - Adjust Mesh Height
* Height Amount:
* Adjust Mesh Height
* Info Screen
* - Mesh Leveling
* 3-Point Mesh Leveling
* - Grid Mesh Leveling
* Side points:
* Level Mesh
* Info Screen
* - Output UBL Info
*/
2017-05-10 12:14:43 -05:00
Brian
3b0127cf8e
Fix compiler complaint related to M100
2017-05-09 21:45:44 -04:00
Scott Lahteine
11104f177b
Apply const in BABYSTEPPING
2017-05-09 12:37:23 -05:00
Scott Lahteine
081bf1f879
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
Scott Lahteine
a9487c9443
Reduce redundancy in BLTOUCH conditionals
2017-05-09 11:52:24 -05:00
Scott Lahteine
8d961b51cc
Eliminate M100 compiler warnings?
2017-05-09 11:32:15 -05:00
bgort
efb9ce24d9
Merge pull request #6645 from tcm0116/bltouch_config
...
Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch
2017-05-09 09:49:16 -04:00
bgort
e2f07917ab
Merge pull request #6644 from tcm0116/bltouch_menu
...
Move BLTouch LCD menu from Main to Main/Control
2017-05-09 09:49:02 -04:00
Florian Heilmann
fe96376a73
Fix FWRetract with positive z-moves during retracted state
2017-05-09 13:54:57 +02:00
Scott Lahteine
47cae2929f
Patch platformio.ini to fix build error in DevIoT
...
For compatibility with DevIoT, until that can be solved.
2017-05-08 20:27:14 -05:00
Scott Lahteine
911a87e006
Disable SCARA feedrate scaling by default
2017-05-08 14:41:03 -05:00
Scott Lahteine
71396f77d3
Cleanups following recent commits
2017-05-08 14:23:01 -05:00
Scott Lahteine
dca48f0e63
Move platformio.ini back to Marlin folder - it works there
2017-05-08 14:23:01 -05:00
Scott Lahteine
a6dafb058e
Small reduction in error code size
2017-05-08 13:58:09 -05:00
Scott Lahteine
a1e04942a2
Cleanup to software PWM variables
2017-05-08 13:51:45 -05:00
Thomas Moore
a20d0794e6
Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch
2017-05-08 16:28:44 +00:00
Thomas Moore
3279337f47
Move BLTouch LCD menu from Main to Main/Control
2017-05-08 15:21:01 +00:00
Brian
6cb0fa4128
Cleanup previous implementation of new quiet probing
...
Saves a few lines of code.
2017-05-08 08:13:46 -04:00
bgort
4b7f8ad9c6
Merge pull request #6610 from bgort/pio-improvements2
...
PlatformIO-related changes
2017-05-08 07:52:42 -04:00
Scott Lahteine
56ca47ab9d
Patch configuration temp units
2017-05-07 21:32:01 -05:00
Scott Lahteine
421dd62800
Adjust spacing of "spaces"
2017-05-07 21:28:54 -05:00
Scott Lahteine
26dba44cd3
Patch redundant lcd settings
2017-05-07 21:28:54 -05:00
Scott Lahteine
34b5041576
Spacing adjustment, ubl_G29
2017-05-07 21:28:54 -05:00
Scott Lahteine
1c4ed8b106
Note 5 extruders in config comments
2017-05-07 21:28:54 -05:00
Scott Lahteine
6e4a5cc8c6
Patch missing const in temp_abs
2017-05-07 21:13:44 -05:00
bgort
d35e2fda10
Merge pull request #6622 from bgort/silentprobing
...
Improve BLTOUCH_HEATERS_OFF functionality
2017-05-07 21:33:44 -04:00
Scott Lahteine
6ed52fb765
Adjust spacing in LSF
2017-05-07 19:11:52 -05:00
Roxy-3D
110afff415
More misc UBL fixes and update gMax examples ( #6632 )
...
I think I forgot to Sync before I committed last time. Some UBL
changes did not stick.
Also, update the gMax configuaration.h file so other than unique numbers
and settings, it exactly matches the default configuration.h file.
2017-05-07 19:02:24 -05:00
Roxy-3D
d92fa40c62
misc. UBL fixes ( #6631 )
...
* Restore LSF functionality
Some of the typo's persisted... Hopefully this gets them all fixed.
* Restore user's expectations of how G28 should behave
* Allow Nozzle size control with ornery host programs
2017-05-07 18:23:48 -05:00
Brian
faa270071d
Improve BLTOUCH_HEATERS_OFF functionality
...
- rename to PROBING_HEATERS_OFF
- move heater pausing functionality into thermalManager
- add variables, pause(), ispaused(), other functions
- add fan pausing functionality -> PROBING_FANS_OFF
- add probing_pause() wrapper
- move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit
- example configs
2017-05-07 16:22:08 -04:00
lrpirlet
d66e9efac5
G29 P1 stops reporting Invalid location with this patch
2017-05-07 15:07:26 +02:00
Scott Lahteine
ce507deb9f
Support temperature units in M503
2017-05-06 20:24:51 -05:00
bgort
a59066bca9
Various improvements - mostly UBL-related ( #6607 )
...
UBL Clean up.
2017-05-06 18:59:16 -05:00
Brian
0446dd3ad8
PlatformIO-related changes
...
- move platformio.ini out of source directory to be more consistent with 'normal' PlatformIO usage
- facilitates IDE integration
- add related .gitignores
2017-05-06 06:22:10 -04:00
Scott Lahteine
77769e284f
Edit configuration comments
2017-05-05 13:32:31 -05:00
Scott Lahteine
6876e79d42
Tweak command index increment
2017-05-05 13:32:31 -05:00
Scott Lahteine
7fcb5c1424
Minor fix in K8200 readme
2017-05-05 11:25:11 -05:00
Max Matveev
267f3a03d9
Fixed USE_CONTROLLER_FAN #define usage
2017-05-04 23:38:29 +02:00
bgort
ae7c602031
fix error in M105 output -- use SERIAL_PROTOCOL for ints instead of SERIAL_PROTOCOL_F ( #6584 )
...
also removed wayward 'address of' ampersand in setTargetHotend and setTargetBed parameters
2017-05-04 16:09:45 -05:00
Scott Lahteine
3cd9af2409
bugfix-1.1.x ReadMe, Version, helper scripts
2017-05-04 07:17:10 -05:00
Florian Heilmann
15268770f5
Fix broken fwretract recovery extruder feedrate
...
When both lowering and recovery are performed using the same "prepare_move_to_destination()" the extruder recovery feedrate ends up being ignored and, instead, is only capped by either the maximum e-speed or the time it takes to perform the z-lowering.
Performing the two moves separately from each other ensures a correct recovery feedrate.
2017-05-04 11:34:28 +02:00
Scott Lahteine
58210c3a19
Merge pull request #6568 from thinkyhead/rc_bilinear_extension
...
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
2017-05-04 00:46:05 -05:00
Scott Lahteine
da08e11acd
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
2017-05-04 00:19:07 -05:00
Scott Lahteine
6834e36871
Merge pull request #6567 from thinkyhead/rc_sdcard_stop
...
Shutdown heaters, autotemp on SD Cancel
2017-05-03 23:54:29 -05:00
Scott Lahteine
399efd66ed
Click to resume
2017-05-03 22:26:06 -05:00
Scott Lahteine
1196e3ca59
SDCard print completion can use "M0"
2017-05-03 22:24:03 -05:00
Scott Lahteine
6854f08d22
Shut down autotemp in disable_all_heaters
2017-05-03 20:54:26 -05:00
Thomas Moore
acec237092
Shutdown heaters and fan after canceling a print from the SD card
2017-05-03 20:43:09 -05:00
Scott Lahteine
11b6a3cbb6
Fix regression in least_squares_fit.cpp
2017-05-03 19:21:44 -05:00
Scott Lahteine
e1b85ff67b
Merge pull request #6559 from thinkyhead/rc_more_optimal
...
Compact smart_fill_mesh slightly
2017-05-03 19:07:36 -05:00
Scott Lahteine
9890141f7b
M100 tweak
2017-05-03 17:28:09 -05:00
Scott Lahteine
2658cc707a
Treat temperature as integer, when possible
2017-05-03 17:27:25 -05:00
Scott Lahteine
1b2c7ec20a
Make G26 compatible with inches and thermal unit modes
2017-05-03 17:12:48 -05:00
Scott Lahteine
241bdffe65
Dress up Bilinear Leveling code
2017-05-03 17:12:35 -05:00
Scott Lahteine
67ecf06cc4
Patch issue in gcode_M900
...
Noted in #6550
2017-05-03 15:26:00 -05:00
Scott Lahteine
de5e485ed7
Explicit upward angle solution
2017-05-03 01:19:44 -05:00
Scott Lahteine
ecdf68735f
Compact smart_fill_mesh slightly
2017-05-03 01:06:58 -05:00
Scott Lahteine
628391304f
Merge pull request #6552 from thinkyhead/rc_more_ubl_cleanup
...
Further cleanup of UBL
2017-05-02 22:46:04 -05:00
Scott Lahteine
902fe76db9
Merge pull request #6556 from thinkyhead/rc_use_controller_fan
...
Implement USE_CONTROLLER_FAN as a feature
2017-05-02 22:43:26 -05:00
Scott Lahteine
7ba7474a73
Drop extra parens from address-of operator
2017-05-02 22:22:23 -05:00
Scott Lahteine
0bf5add075
Use UBL_MESH_(MIN|MAX)_[XY] for G29 move limits
2017-05-02 22:22:23 -05:00
Scott Lahteine
b8ba3b7647
Use 'sq' macro where possible
2017-05-02 22:22:23 -05:00
Scott Lahteine
66eba3346b
Remove G29 lcd control debugging
2017-05-02 22:22:23 -05:00
Scott Lahteine
3517154135
Reduce code size, fix bug in smart_fill_mesh
2017-05-02 22:22:23 -05:00
Scott Lahteine
c4e34adcf1
Apply formatting, coding standards to UBL
2017-05-02 22:22:23 -05:00
Scott Lahteine
f4239e62b1
Merge pull request #6557 from thinkyhead/rc_hotend_status_item
...
Keep refreshing LCD if hotend status is on-screen
2017-05-02 22:04:21 -05:00
Scott Lahteine
fc857c5b78
Merge pull request #6549 from thinkyhead/rc_bltouch_refix
...
Fix BLTOUCH_HEATERS_OFF bug
2017-05-02 21:53:09 -05:00
Thomas Moore
b39f634252
Continuously update LCD when hotend status is displayed in Filament Change screens
2017-05-02 21:49:40 -05:00
Scott Lahteine
2c13922c46
Implement USE_CONTROLLER_FAN as a feature
2017-05-02 20:18:52 -05:00
Scott Lahteine
492bc536bf
Modify debug methods to take PSTR
2017-05-02 17:53:40 -05:00
Bob-the-Kuhn
e5a27d9f36
G29 P2 & P4 bug fixes & improvements
2017-05-02 17:53:40 -05:00
Scott Lahteine
b93be716cf
Remove trailing whitespace
2017-05-02 17:53:40 -05:00
Scott Lahteine
76eca9732d
Fix mis-named language string define in Dutch
2017-05-02 16:08:09 -05:00
Scott Lahteine
806f670092
Merge pull request #6511 from Bob-the-Kuhn/UBL--G26-minor-improvements
...
UBL: G26 minor improvements
2017-05-02 16:06:22 -05:00
Scott Lahteine
0803c9d997
Merge pull request #6533 from thinkyhead/rc_autocal_patches
...
General cleanup of G33
2017-05-02 16:01:02 -05:00
Brian
ff5fed137f
Fix BLTOUCH_HEATERS_OFF bug
2017-05-02 15:53:52 -05:00
Scott Lahteine
ca1dd739a3
Organize ubl.h defines by the files they serve
2017-05-02 15:47:06 -05:00
Scott Lahteine
0449f69179
Cleanup patch to recent merge
2017-05-02 15:47:06 -05:00
LVD-AC
da2abad636
Various cleanups of G33
...
- update comment section
- redefined P5 grid
- minor clean to probe radius routine
- updated EEPROM version to V37 according remark in #6517
2017-05-02 15:47:06 -05:00
Bob-the-Kuhn
7ce613db0a
Fix Conditionals test for endstop plug used by Z2 or probe.
2017-05-02 15:41:47 -05:00
Scott Lahteine
ef750ae86b
Towards supporting Z2 in Endstops::report_state
2017-05-02 15:39:32 -05:00
Scott Lahteine
c03c623951
Sanity-check Z2 endstop assigned to a nonexistent pin.
2017-05-02 15:39:00 -05:00
Scott Lahteine
70f31b6c76
Throw an error if no E stepper is free for X2, Y2, Z2
2017-05-02 15:13:47 -05:00
Scott Lahteine
ac69eca586
Merge pull request #6538 from bgort/ubl_gridlbls
...
Fix, cleanup, prettify `G29 O` output
2017-05-02 14:09:18 -05:00
Scott Lahteine
99b11db1a1
Merge pull request #6537 from thinkyhead/rc_cleanup_sunday
...
Various leveling-related patches
2017-05-02 00:59:59 -05:00
Roxy-3D
41e63bbb7c
Fix Horizontal and Vertical UBL optimization bug. ( #6540 )
...
* Fix Horizontal and Vertical optimization bug.
And drastically reduce the debug code foot print....
* Yeah Baby!
The debug print is going A - OK !
2017-05-01 23:52:33 -05:00
Scott Lahteine
e79b335367
Patches for leveling reactivation in G28 / M48
2017-05-01 17:38:57 -05:00
Brian
92e22c3bf2
Fix, cleanup, prettify G29 O output
2017-05-01 18:19:57 -04:00
Scott Lahteine
7d5cd7e0d7
Tweak set_bed_leveling_enabled
2017-05-01 16:46:52 -05:00
Scott Lahteine
ed81e9b3d3
Adjust leveling conditionals
2017-05-01 16:46:48 -05:00
Scott Lahteine
a64e5659ce
Clean up G26 external references, private vars
2017-05-01 15:17:52 -05:00
Scott Lahteine
2887c20788
Add a function to home all axes (i.e., gcode_G28)
2017-05-01 15:03:37 -05:00
Scott Lahteine
8f895d5e01
Merge pull request #6530 from thinkyhead/rc_cleanups_2
...
Fixes for DUAL_NOZZLE_DUPLICATION_MODE
2017-05-01 12:34:11 -05:00
Scott Lahteine
8002672938
Fixes for DUAL_NOZZLE_DUPLICATION_MODE
2017-05-01 12:20:25 -05:00
Scott Lahteine
f69acde966
Merge pull request #6528 from MarlinFirmware/revert-6416-negative-mesh-fix
...
Revert "Fix for Meshpositions if printer has negative endstop positions"
2017-05-01 11:51:13 -05:00
Scott Lahteine
4803a4322e
Revert "Fix for Meshpositions if printer has negative endstop positions"
2017-05-01 11:25:07 -05:00
Scott Lahteine
4f74c416a4
Patch for BLTOUCH_HEATERS_OFF
2017-05-01 11:13:40 -05:00
Scott Lahteine
1823a6ea29
Patch for missing DELTA_HEIGHT
2017-05-01 11:05:35 -05:00
Scott Lahteine
d814e468d2
Fix set_heaters_for_bltouch and usage
...
- Only call `set_heaters_for_bltouch` when actually deploying/stowing
- Clear `next_emi_protection` when re-enabling heaters
2017-05-01 02:27:52 -05:00
Brian
4e1448e75a
Various fixes for compiler warnings
...
add BLTouch-related messages in english and (rusty) french;
add missing endstops.h in ultralcd.cpp;
fix misc. compiler warnings;
fix lsf_reset - ZERO macro can't handle a pointer as it would only memset the size of the pointer, not the size of the entire struct
2017-05-01 02:12:40 -05:00
Scott Lahteine
fc9919b749
Merge pull request #6515 from thinkyhead/rc_cleanup_sunday
...
Some minor cleanups to code formatting
2017-04-30 22:58:16 -05:00
Scott Lahteine
c12bc51a59
cardreader.cpp spacing tweak
2017-04-30 22:27:47 -05:00
Scott Lahteine
46b714a52f
Cleanup spacing in pinsDebug.h
2017-04-30 22:27:26 -05:00
Scott Lahteine
88141ca717
Remove things that aren't pins from pinsDebug_list.h
2017-04-30 22:24:51 -05:00
Scott Lahteine
ff35b11d08
Resolve compiler complaint about memset volatile *
2017-04-30 22:24:03 -05:00
Scott Lahteine
0b421e97c9
Rename some (unused) OMCA pins
2017-04-30 22:16:44 -05:00
Scott Lahteine
c2c9f01c8e
Patch newly-introduced bug in IS_Z2_OR_PROBE
2017-04-30 20:17:10 -05:00
Scott Lahteine
819df5e06d
Cleanups to pins debugging
2017-04-30 20:17:10 -05:00
Scott Lahteine
42824b0e1f
Use new serial spacing function to save PROGMEM
2017-04-30 20:14:42 -05:00
Scott Lahteine
cd72901fb7
Cleanups to UBL code
2017-04-30 20:14:42 -05:00
Bob-the-Kuhn
ce87c7803e
implement G26 changes per review
2017-04-30 19:05:25 -05:00
jaysonkelly
769817ce5e
Need to define this for Rigidboard V2
...
Motor current defaults need to be defined for Rigidboard
2017-04-30 19:04:27 -05:00
Scott Lahteine
39c6c5621b
Merge pull request #6416 from SkyNet3D/negative-mesh-fix
...
Fix for Meshpositions if printer has negative endstop positions
2017-04-30 17:38:41 -05:00
Scott Lahteine
671a44b8aa
Merge pull request #6410 from teemuatlut/LVD-Delta
...
Delta auto-calibration updates
2017-04-30 16:39:51 -05:00
Scott Lahteine
5d5c9a040a
Merge pull request #6509 from thinkyhead/rc_config_patches
...
Configuration cleanup
2017-04-30 16:10:27 -05:00
Scott Lahteine
d480b6f75a
Enable E1 stepper for DUAL_NOZZLE_DUPLICATION_MODE
2017-04-30 16:01:01 -05:00
Bob-the-Kuhn
dcde202157
Add startup notice & update host temperatures while waiting
...
Right now G26 doesn't send a notice to the host that it's running. It's
not until the heaters are at temperature that you know for sure if it's
running or not.
Added host temperature prints so that someone watching the host
interface will see the temperatures change during the warm up period.
Updates are sent every 5 seconds.
2017-04-30 15:51:58 -05:00
Scott Lahteine
54751e8557
Put DISTINCT_E_FACTORS adjacent to the affected settings
2017-04-30 15:30:31 -05:00
Scott Lahteine
0dbe4b3e54
Edit configurations to reduce verbosity, arrange logically
2017-04-30 15:30:31 -05:00
Scott Lahteine
0750933bc6
Merge pull request #6490 from Bob-the-Kuhn/Missing-X-stop
...
Endstop not enabled if pin is zero
2017-04-30 15:09:36 -05:00
bgort
5ace3699b1
Output (commented) coordinates on G29 S-1; helps identify the x/y points that correspond with i/j coordinates, which eases manual tweaking of z values ( #6507 )
2017-04-30 14:59:34 -05:00
Scott Lahteine
d7d4378481
Remove inaccurate version description
2017-04-30 14:57:19 -05:00
Scott Lahteine
f169c04604
Merge pull request #6491 from thinkyhead/rc_cleanup_wednesday
...
Various cleanups for recent merges
2017-04-30 14:56:48 -05:00
Scott Lahteine
6d63255ddc
Merge pull request #6508 from bgort/pio_improvements
...
PlatformIO-related improvement
2017-04-30 14:53:22 -05:00
LVD-AC
cafc48dff8
little oops
2017-04-30 22:17:49 +03:00
Brian
627730948d
Add U8glib as a dependency to platformio.ini for those who use PlatformIO; this makes compiling even easier as u8glib will be downloaded and included automatically.
...
Also added the new .pio-related directory to .gitignore, and a few ignores for those who use cmake.
2017-04-30 15:13:51 -04:00
bgort
5974d8e168
change G26 default nozzle size to 0.4, consistent with instructions ( #6506 )
2017-04-30 13:23:46 -05:00
LVD-AC
471a321624
leaner code for probe routine
2017-04-30 19:15:16 +03:00
bgort
3c0d5ba0a1
allow idle() to be called - fixes sometimes crash/hang in G29 I; ( #6505 )
2017-04-30 10:22:31 -05:00
Roxy-3D
2509587b5a
Correct over optimization of pre-initialized variables ( #6500 )
...
* Correct over optimization of pre-initialized variables
NEAR_ZERO() works most of the time... But it leaves corner cases
uncovered. We need to explicitly check if these variables are +/-
infinity.
* Correct over optimization of pre-initialized variables
2017-04-29 22:01:29 -05:00
LVD-AC
585c00a728
Proposed changes
...
This is what I did yesterday:
- basicly gave the tests more comprehensive names; put all the
declarations at the top; got rid of the magic negative C-value (renamed
to P + A, O, T)
- "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 :
-1)) * delta_calibration_radius" compiles wrong is zig_zag statement is
without brackets
- DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value
to normalize will not compile otherwise)
-Wrote 3 dummies to keep EEPROM lenght the same
-Reset the configs to the 'original' with autocal + menu disabled (but
can be enabled of course)
2017-04-29 18:53:14 +03:00
Scott Lahteine
29fa241617
Initial patches to G33
2017-04-29 15:29:49 +03:00
Scott Lahteine
12ce051b55
Add a function to output spaces to serial
2017-04-29 15:29:49 +03:00
Scott Lahteine
42f4c53254
Starting on G33 rewrite
2017-04-29 15:29:49 +03:00
Scott Lahteine
baf3b91460
DELTA_TOWER_ANGLE_TRIM only needs AB
2017-04-29 15:29:49 +03:00
emartinez167
27cd165adf
Last three Spanish language strings
...
Updates as per @thinkyhead request.
2017-04-29 11:33:30 +08:00
Scott Lahteine
2cc9774f34
Apply bltouch_menu
...
As proffered in #6252
2017-04-28 18:43:03 -05:00
Scott Lahteine
1a111180de
Clean up set_heaters_for_bltouch
2017-04-28 18:32:39 -05:00
Scott Lahteine
7db805930a
Cleanup configurations
2017-04-28 18:32:39 -05:00
Scott Lahteine
8bf3a3fcdb
Remove inaccurate comments from ubl.h
2017-04-28 18:32:38 -05:00
Scott Lahteine
47557d5a19
Fix up formatting in ubl.h
2017-04-28 18:32:38 -05:00
Scott Lahteine
0a8e09c723
Clean up excess whitespace, comment formatting
2017-04-28 18:32:38 -05:00
Scott Lahteine
a35c681453
Clean up least_squares_fit
2017-04-28 17:33:28 -05:00
Bob-the-Kuhn
40089249c3
add PIN_EXISTS to HAS_xyz_MIN macro
2017-04-28 16:47:59 -05:00
Scott Lahteine
8020069371
Apply coding standards for indentation
2017-04-28 15:43:06 -05:00
Scott Lahteine
dabca83742
Merge pull request #6437 from Kaibob2/patch-1
...
Update language_de.h
2017-04-28 14:47:47 -05:00
Kai
3d0a4c4ea9
Update language_de.h
2017-04-28 21:09:10 +02:00
Silvio
6bf1d50188
Added missing translations ( #6458 )
2017-04-28 13:49:16 -05:00
Mehmet Sutas
404f767d44
Update language_tr.h ( #6463 )
2017-04-28 13:48:31 -05:00
Petr Zahradnik
5e701524f8
Update language_cz.h for new translations ( #6465 )
...
* Update language_cz.h for new translations
* Correction translate
* Revert correction back to hotend
2017-04-28 13:47:43 -05:00
gege2b
0a92ce7a98
Completed french translation ( #6475 )
2017-04-28 13:46:09 -05:00
Ernesto Martinez
ff4fb42e7d
Add new strings as per recent changes in RCBugFix ( #6482 )
...
Adding missing strings to Spanish language, as per changes recently
done to the RCBugFix branch.
2017-04-28 13:45:22 -05:00
paulusjacobus
67d1fc5556
Update language_nl.h ( #6478 )
...
updated the RCbugfix release with additional Dutch translations
2017-04-28 13:42:39 -05:00
benlye
8c6b4537a6
Fix issue in itostr4sign with numbers <100 ( #6487 )
...
The first character in the string wasn't blanked if the number went from >= 100 to <100, resulting in artefacts in the displayed string.
2017-04-28 13:35:11 -05:00
LVD-AC
4ea8d0f89b
Solved "The Travis CI build failed "
2017-04-28 19:55:21 +03:00
LVD-AC
ed6b361e27
cleanup ready to squash
2017-04-28 18:09:18 +03:00
LVD-AC
7a6a1ef583
M666 normalize positive values to <=0
...
M666
+ tower radians absolute value
2017-04-28 18:05:24 +03:00
Roxy-3D
4075b95519
Allow BL-Touch users to control heaters during probe event ( #6485 )
...
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
2017-04-28 09:19:55 -05:00
Roxy-3D
6e8ecb908a
Shut down heaters during BL-Touch probe event
...
The electro-magnetic interference from the bed and nozzle are affecting
the BL-Touch repeatability for some users. This problem can be helped
by shutting down the heaters during the actual probe event and then
quickly turning them back on.
Because this code is messing with the heaters, it is written in a
paranoid manner. It only turns the heaters back on if everything is
EXACTLY as it expects things to be. The BL-Touch probe must have been
put into a deployed state less than 20 seconds prior, or the stow()
function will NOT turn the heaters on.
This code has been tested and works for both G28 and probing functions.
2017-04-27 18:52:58 -05:00
LVD-AC
d8102aeca8
Cn negative : no tower angle calibration
...
Giving a negative number of probe points disables the tower angle
correction calibration ('4point' instead of '7point' solution)
EEPROM version updated
2017-04-27 21:13:07 +03:00
Roxy-3D
3601f08e87
Better tuned FolgerTech i3-2020 example file
2017-04-27 11:16:38 -05:00
Roxy-3D
a20b7d9581
Better tuned Example file for FolgerTech i3-2020
...
Also setting up Z-Probe on the machine.
2017-04-27 11:16:38 -05:00
Kai
bf2fe46062
Update language_de.h
2017-04-27 10:13:02 +02:00
Kai
11d34be060
Update language_de.h
2017-04-27 10:06:26 +02:00
Scott Lahteine
817ecb9ff4
Merge pull request #6453 from thinkyhead/rc_cleanup_wednesday
...
Minor cleanups, work-in-progress
2017-04-26 19:41:52 -05:00
Roxy-3D
22f6e277af
Get example files fully into compliance
...
Change to support new name GRID_MAX_POINTS_XY
Start UBL at version 1.0 in the CUSTOM_MACHINE_NAME
2017-04-26 16:22:17 -05:00
LVD-AC
a9bc1d30cc
z_offset change
...
Avoids to have to recalibrate the delta_height after a z_offset change
2017-04-26 21:57:11 +03:00
Roxy-3D
ec26e23e7e
Add my two 'Nice' machines as example configurations
...
These are my two 'Nice' machines. Both are good example machines. The
FolgerTech i3-2020 is probably the best value kit on the market right
now. And it has developed a 'Cult Following' of hobbiests. I'll always
have an up to date Configuration.h file set for it, so it may as well be
an example configuration.
And the gCreate gMax 1.5+ is the best printer I've ever seen that runs
Marlin. For sure, I'll always have up to the minute Configuration.h
files for this printer also. I've moved over to using the gMax as my
primary development machine for Marlin. So... Besides being a good
machine, it is a nice convienience for me to have this Configuration.h
file as an 'Example'.
2017-04-26 12:46:12 -05:00
Scott Lahteine
adb8e68592
Fix stuck "Print Aborted" LCD message
...
Fixes #6393
2017-04-26 06:24:23 -05:00
Scott Lahteine
096b927102
Minor optimization of FILAMENT_WIDTH_SENSOR
2017-04-26 06:24:23 -05:00
Scott Lahteine
5bdb0b567d
Cosmetic patches
2017-04-26 06:24:23 -05:00
Kai
38ae7f4238
Added more translation strings
...
There are some quite tricky ones which are hardly translateable.
Maybe @Sebastianv650 can review this
2017-04-26 11:58:11 +02:00
Scott Lahteine
4d96d3eab1
Bootscreen delay after clear, then set chars
...
Fixes #6426
2017-04-25 23:37:28 -05:00
Scott Lahteine
5512130d6c
Only set Compare Mode for channel A
...
Fixes #6445
2017-04-25 23:14:16 -05:00
Roxy-3D
d467e97679
Smart-Fill and Mesh-Tilting (both 3-point and grid) working!
...
Also... The memory corruption issue may be fixed. The GCC compiler
was inlining static functions and this caused the G29() stack frame to
become much larger than the AVR could handle.
2017-04-25 21:03:41 -05:00
Scott Lahteine
a699967ec8
Merge pull request #6443 from thinkyhead/rc_interrupt_fastio
...
Patch fastio.h with Timer 2 interrupt support
2017-04-24 20:09:41 -05:00
Scott Lahteine
2823bf0874
Update fastio.h with special handling for Timer 2
2017-04-24 16:58:22 -05:00
Scott Lahteine
fd535e111a
Fix up XYZ_CONSTS_FROM_CONFIG macro
2017-04-24 14:05:11 -05:00
Kai
03c2f756b9
Update language_de.h
2017-04-24 13:32:16 +02:00
LVD-AC
dcf30a69d6
Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS]
...
More consistent with M665 where C-value is allowed as well, then
normalized
2017-04-23 14:51:24 +03:00
Brian
f41fb2b635
Numerous UBL-related changes:
...
* relocated ubl state to config. store:
* removed a number of ubl state variables and padding which were largely unused - saved 58 bytes of both SRAM and EEPROM;
* modified ubl sanity_check - no longer checks removed state variables that were otherwise unused, where checking didn't seem to accomplish anything, ultimately;
* removed pre_initialized state, saving 64 bytes of SRAM;
* removed automatic saving of UBL state after UBL activation/deactivation;
* consolidated multiple GRID_MAX_POINTS_X/Y to 'Global Leveling' section of EEPROM;
* minor update to G29 Sx notes/instructions;
* renamed mesh load and save parameter to 'slot' from 'm' for clarity;
2017-04-22 18:44:39 -05:00
Brian
f1a4758cef
use progmem instead of sram for mesh_index_to_x/ypos array;
...
fix maximum mesh_index_ array size at 16 (15+1);
2017-04-22 18:34:49 -05:00
Scott Lahteine
87d240042a
Optimize number-to-string functions, no-fan display
2017-04-22 16:23:15 -05:00
Scott Lahteine
959566cf0a
Update note about M163 / M164
2017-04-22 16:23:15 -05:00
Scott Lahteine
830851df13
Spend some SRAM to optimize bilinear leveling
2017-04-22 16:19:31 -05:00
Scott Lahteine
091179d960
bed_level_grid => z_values (also *_virt array)
2017-04-22 16:19:31 -05:00
Scott Lahteine
23cdbbb2d3
Add a method to refresh bilinear bed level after a change
2017-04-22 16:19:30 -05:00
Scott Lahteine
ccda63c473
Drop the accessor form for LCD value editing
2017-04-22 16:19:30 -05:00
Scott Lahteine
10da175be5
Fix a pair of compiler complaints
2017-04-22 16:19:30 -05:00
Scott Lahteine
ff0018e287
Format hex values as uppercase
2017-04-21 21:42:41 -05:00
android444
77aa16005d
Polish font
...
Add polish font for GLCD displays only.
HD44780 work properly without polish character.
Update language_pl.h.
2017-04-21 21:42:41 -05:00
teemuatlut
244f67590e
Delta probe height bug solved
2017-04-22 02:23:56 +03:00
Hans Raaf
406a83ff2d
Fix for Meshpositions if printer has negative endstop positions
2017-04-22 00:16:16 +02:00
benlye
3ed737425d
Fix typo in new SET_COM macro
2017-04-21 15:08:18 -05:00
Brian
88649b06a6
use planner.z_fade_height, etc. instead of private, ubl-specific g29 fade height
2017-04-21 09:09:09 -05:00
LVD-AC
004928148c
Tower angles
...
Adding '7-point' tower angle correction calibration
2017-04-21 12:48:45 +03:00
LVD-AC
76ec7a0f80
Adding upto 7*7 probe grids
...
- adding Cn 5, 6 and 7
2017-04-21 11:58:39 +03:00
LVD-AC
d4f593d200
Delete 'expert level'
...
and getting rid off verbose level 3 and configuration_adv settings
2017-04-21 11:58:39 +03:00
LVD-AC
13c8493878
M665 rework and related issues (all delta's)
...
- Making M665 compatible with repetier (see
http://reprap.org/wiki/G_code#M665:_Set_delta_configuration )
- M665 B also sets the radius for manual calibration menu
- Converting tower ajustment definitions to arrays - tower angle
corrections compatible with Esher 3D wizzard
- Only tower angles need to be adjustable with M665 and stored to EEPROM
- tower radius and diag rod can be adjusted in the FW only with #define
2017-04-21 11:58:39 +03:00
Scott Lahteine
e0e069c6d8
Clean up trailing whitespace
2017-04-20 17:52:07 -05:00
Scott Lahteine
9b94210394
Bring FLSUN config more up to date
2017-04-20 17:52:06 -05:00
Scott Lahteine
b0aa256bc0
Updates for all configs
2017-04-20 17:52:05 -05:00
Scott Lahteine
ee46ce1743
Add and apply interrupt helper macros
2017-04-20 16:04:29 -05:00
Scott Lahteine
6131c62499
General cleanup
2017-04-20 16:04:29 -05:00
benlye
2c86dfd3b5
Fix compiler type conversion errors after LCD changes
2017-04-20 16:04:29 -05:00
Scott Lahteine
55f9e76610
Merge pull request #6367 from thinkyhead/rc_cleanup_followup
...
Cleanup after some direct commits
2017-04-20 15:13:24 -05:00
Scott Lahteine
d38a792a91
Merge pull request #6382 from MagoKimbra/fix_configuration_store
...
Fix double definition in configuration_store
2017-04-20 15:06:58 -05:00
Scott Lahteine
b98bc034ae
Replace c_assert hack with static_assert
2017-04-19 13:07:35 -05:00
Scott Lahteine
5eb2b1a790
Clear up G29 compiler warnings
2017-04-19 13:07:35 -05:00
Scott Lahteine
4ce2a63db0
Apply const, spacing to Marlin_main.cpp
2017-04-19 13:07:34 -05:00
Scott Lahteine
e97f1284c1
Cleanup of pins testing code
2017-04-19 13:07:34 -05:00
Scott Lahteine
e9b53ae00c
Cleanup after some direct commits
...
https://github.com/MarlinFirmware/Marlin/commit/5e9726530ff21d3bc62beaa6
ac1b9437c276130a
2017-04-19 13:07:34 -05:00
Scott Lahteine
e05d050a1e
Add hex routine to print an address
2017-04-19 13:07:34 -05:00
Scott Lahteine
4542282f5e
Fix broken TOGGLE macro in fastio.h
2017-04-19 12:38:13 -05:00
MagoKimbra
ed52275a14
Fix double definition in configuration_store
2017-04-18 17:57:40 +02:00
Scott Lahteine
de569e3d4e
Merge pull request #6327 from Bob-the-Kuhn/M43-toggle-&-Z-probe-fixes
...
M43 Toggle & Z servo test - fix bug & add another check
2017-04-18 03:21:57 -05:00
Scott Lahteine
f33a650ecc
Merge pull request #6368 from thinkyhead/rc_linear_advance_eeprom
...
Add Linear Advance values to EEPROM and LCD
2017-04-18 02:54:12 -05:00
Scott Lahteine
a00ae4790a
Replace M905 with unique code M900
2017-04-17 16:39:37 -05:00
Scott Lahteine
1286d9603d
Clean up and organize ultralcd.cpp
2017-04-17 16:39:36 -05:00
Scott Lahteine
3cdf78a79f
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
Thomas Moore
f8e77d6545
Add Linear Advance values to EEPROM and enable configuration of K via LCD
2017-04-17 16:39:36 -05:00
Scott Lahteine
eb2d073dae
Add M905 R for setting the E/D ratio directly
2017-04-17 16:39:36 -05:00
Scott Lahteine
69dfa54a84
Use code_value_linear_units for known-linear axes
2017-04-17 16:39:36 -05:00
Scott Lahteine
b956f2642b
Show M503 report with current linear units
2017-04-17 16:39:36 -05:00
Scott Lahteine
ba4a005ceb
Merge pull request #6373 from mtowara/mt_makefile_fix
...
Fix Makefile build
2017-04-17 16:16:37 -05:00
towara
150b15c311
fix compiler errors generated by more stringent flags in Makefile:
...
- use volatile for registers
- avoid implicit casts
2017-04-17 11:59:47 +02:00
towara
f6095c9325
fix missing serial.cpp in Makefile
2017-04-17 11:59:03 +02:00
Scott Lahteine
871f92378c
Tweak headings in EEPROM structure
2017-04-16 18:42:33 -05:00
Scott Lahteine
bf2548be4a
Merge pull request #6362 from tcm0116/babystepping
...
Only queue babysteps if axis is in a known position
2017-04-16 17:46:06 -05:00
dot-bob
9c410ddf68
Fixed an issue where a display with a hardware reset pin (LCD_RESET) may not get initialized properly.
2017-04-15 22:45:15 -06:00
Thomas Moore
72a7fac461
Only queue babysteps if axis is in a known position
2017-04-15 23:19:43 -05:00
Roxy-3D
5e9726530f
Setup to find data corruption and general clean up
...
This data corruption problem is very difficult. Just changing the code
a little bit changes whether the problem even happens and what is
affected. I need these changes in the main branch so I can operate with
the extra debug code always available and turned on.
Everything is setup such that if M100 is turned off or DEBUG(ECHO) is
turned off, the code is not affected. M100 has been made a little bit
more inteligent so it can display the serial command buffers in a more
meaningful way (because the data corruption seems to often times end up
in that area).
2017-04-15 19:26:43 -05:00
Scott Lahteine
e519e95953
Merge pull request #6358 from thinkyhead/rc_doubleclick_fix
...
Show Cancel/Continue screen for ABL "Level Bed"
2017-04-15 17:25:37 -05:00
Scott Lahteine
a81606c680
Show Cancel/Continue screen for ABL "Level Bed"
2017-04-15 16:51:03 -05:00
Scott Lahteine
51021bc7b8
Merge pull request #6353 from thinkyhead/rc_endstop_coolness
...
Clean up endstop triggering code
2017-04-15 16:49:54 -05:00
Scott Lahteine
857dec0990
Merge pull request #6342 from benlye/benlye-fix-softspi
...
Fix softspi variant conditional for 1284p
2017-04-15 16:33:50 -05:00
Scott Lahteine
4e04383d18
Merge pull request #6354 from thinkyhead/rc_doubleclick_fix
...
Fix undefined symbol if DOUBLECLICK_FOR_Z_BABYSTEPPING and HAS_BED_PROBE defined
2017-04-15 16:06:29 -05:00
Thomas Moore
8dd0492e68
Show lcd_babystep_zoffset screen if DOUBLECLICK_FOR_Z_BABYSTEPPING is enabled and HAS_BED_PROBE is defined
2017-04-15 14:44:50 -05:00
benlye
0a2f60fab4
Make spi.h inclusion conditional
...
spi.h is only needed if HEATER_0_USES_MAX6675 is defined, so making its inclusion conditional on HEATER_0_USES_MAX6675 being defined.
2017-04-15 16:22:42 +01:00
Bob-the-Kuhn
60471b7592
minor improvements
...
Configuration_store.cpp - changed a couple of print statements so the
values were printed. The old method resulted in the formula being
printed.
ubl_G29
1) added support for R option to P4. Now probes all points unless R is
present and the number is greater than 0.
2) P2 - moved map print statement so it showed the point that was
currently being probed, The old location did this only for the first
point.
3) P4 - Moved the map print for the same reason.
ultralcd.cpp - changed "Mesh Editor :" to "Mesh Editor" because the LCD
draw routine puts a ":" in automatically so you end up with an extra ":"
using the old message.
2017-04-15 09:31:55 -05:00
Scott Lahteine
25a61e9061
Improve motion-based endstop triggering code
2017-04-15 06:16:50 -05:00
Scott Lahteine
a2356c2825
Fix compiler warning about z-offset callback
2017-04-15 02:50:27 -05:00
Scott Lahteine
037c964d26
Reverse bools on prepare_move sub-functions
2017-04-15 01:08:19 -05:00
Scott Lahteine
d9c4333806
Extra logging of Dual X modes
2017-04-15 01:08:19 -05:00
Scott Lahteine
4067d15c92
Cleanup, extend TMC2130 implementation
2017-04-14 23:00:00 -05:00
Scott Lahteine
d60c02c5b1
Cleanup, extend TMC2130 configuration
2017-04-14 22:43:56 -05:00
Scott Lahteine
0e97b3d6d0
Fix some configuration spacing
2017-04-14 22:36:10 -05:00
Scott Lahteine
cf6f483378
Merge pull request #6187 from thinkyhead/rc_flsun_delta_autocal
...
Delta: DELTA_HEIGHT, G33 Auto-Calibrate, drop M206/M428, add M665 H
2017-04-14 22:32:12 -05:00
Scott Lahteine
24882adfbf
Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION
...
- On `DELTA` the `M665 H` option supplants `M206`
- On `DELTA` `NO_WORKSPACE_OFFSETS` only reverts `G92` behavior
- Spawn 4 conditionals based on `NO_WORKSPACE_OFFSETS`
- Optimize coordinate space conversion for `DELTA` workspace
- To keep EEPROM version, retain `home_offset[XYZ]`, just ignore XY
2017-04-14 21:56:49 -05:00
Bob-the-Kuhn
1acb84ba02
fix 1 bug, add error messages
...
===============================================
make changes requested by reviewers
===============================================
add M43 test to Travis, fix EOL, remove trailing spaces
2017-04-14 20:57:45 -05:00
LVD-AC
8821963873
Implement delta auto-calibration and delta_height
2017-04-14 19:46:31 -05:00
Scott Lahteine
b305699046
Merge pull request #6341 from benlye/benlye-lcd_babystep_zoffset
...
Fix lcd_babystep_zoffset()
2017-04-14 19:11:46 -05:00
LVD-AC
03bda24d19
Add delta auto-calibration and configuration for Flsun AC
2017-04-14 19:08:14 -05:00
Scott Lahteine
1bd25fd2b3
Clean up config spacing, section headings, etc.
2017-04-14 19:06:31 -05:00
Scott Lahteine
153b0ae967
Tweak Delta Printer configuration note
2017-04-14 19:06:06 -05:00
Scott Lahteine
81ffd98dd9
Allow faux leveling
2017-04-14 19:06:06 -05:00
Scott Lahteine
2355d87e11
Merge pull request #6346 from thinkyhead/rc_broken_abl_test
...
Add support for SOLENOID_PROBE
2017-04-14 18:36:32 -05:00
Scott Lahteine
f4685c28b7
Reorder Conditionals_post.h and add comments
2017-04-14 18:18:21 -05:00
Scott Lahteine
0ac2b5c045
Additional 5 extruders support (solenoids, microstepping)
2017-04-14 18:18:20 -05:00
Scott Lahteine
fd2a0784ba
Add support for SOLENOID_PROBE
2017-04-14 17:24:36 -05:00
Scott Lahteine
5803ba43a9
Expose EXT_SOLENOID as an advanced option
2017-04-14 17:24:36 -05:00
Scott Lahteine
ea734f910b
Use direct pin manipulation whenever possible
2017-04-14 16:55:35 -05:00
Scott Lahteine
19d0c6a0c0
Patch to init W with RGBW_LED
2017-04-14 16:55:23 -05:00
Scott Lahteine
3e079660b0
Never define SLED_PIN
2017-04-14 16:36:32 -05:00
benlye
1a447d0047
Fix variant conditional for 1284p
2017-04-14 18:46:09 +01:00
benlye
1f9ee42750
Fix lcd_babystep_zoffset()
...
Resolve 'steps_to_mm was not declared in this scope' compilation error after recent changes to merge babystepping with M851
2017-04-14 18:38:35 +01:00
Bob-the-Kuhn
445d39e95a
CORExx endstop detection fixes
...
1. The CORExx printers were checking more endstop axis than needed.
2. Removed all the CORE_xx_NOT logic. The motor_direction(xx) routine
always returns the correct data so it is not needed. It was actually
cause the wrong direction to be checked in some cases.
3. Made the logic/defines for X, Y & Z axis all the same. The old logic
checked inappropriate configurations for Y and didn't check all the
correct configurations on Z.
4. Added a check for zero steps before the X, Y & Z axis. Previously
would check the they axis even if there were no movement.
2017-04-13 21:43:37 -05:00
Roxy-3D
28fec61f92
M100 Fixes and Features
...
All the memory accesses need to be unsigned char in order to avoid
false errors being detected. Two new features are available for
developers to call into the M100 functionality to look for data
corruption.
2017-04-13 18:20:53 -05:00
Scott Lahteine
52c3ace102
Add BABYSTEP_ZPROBE_OFFSET as an optional feature
2017-04-13 16:29:43 -05:00
Scott Lahteine
cd4e6abec8
Group BABYSTEPPING options together
2017-04-13 16:26:45 -05:00
Scott Lahteine
60ac41a32c
Add code to handle changes to zprobe_zoffset
2017-04-13 15:46:35 -05:00
Scott Lahteine
8fa4209916
Movement/adjustment should be reverse of probe offset change
2017-04-13 15:46:05 -05:00
Thomas Moore
361655828f
Use babystepping to adjust bed probe z-offset
2017-04-13 15:46:05 -05:00
Scott Lahteine
36e5c7c389
Merge pull request #6330 from thinkyhead/rc_improvements
...
Sanity check per-axis options' array sizes
2017-04-13 13:08:44 -05:00
Scott Lahteine
02fca543bb
Merge pull request #6272 from thinkyhead/rc_adc_variable_rate
...
Make ADC sensor reading frequency adjustable
2017-04-13 12:49:31 -05:00
Scott Lahteine
34308368c0
Sanity check per-axis settings for size
2017-04-13 11:35:20 -05:00
Scott Lahteine
ac96ae89f9
Apply const in Stepper::isr
2017-04-13 06:20:36 -05:00
Scott Lahteine
2fa1e882d0
Merge pull request #6325 from thinkyhead/rc_M20_with_size
...
Simplified M20 with size
2017-04-13 05:06:52 -05:00
Bob-the-Kuhn
1b12fea0fa
simplified M20 with size
2017-04-13 04:56:58 -05:00
Scott Lahteine
4022b971db
Merge pull request #6315 from thinkyhead/rc_unify_M421
...
Unify M421
2017-04-12 19:43:28 -05:00
Scott Lahteine
b236562354
Merge pull request #6306 from thinkyhead/cleanup_after_6302
...
Adjustments to M100
2017-04-12 19:12:27 -05:00
Scott Lahteine
5e4f4d387f
Swap MBL z_values dimensions to [X][Y]
2017-04-12 17:24:05 -05:00
Scott Lahteine
063f641651
Unify M421
2017-04-11 15:46:13 -05:00
Scott Lahteine
6d5400dc31
Merge pull request #6240 from thinkyhead/rebuild_rgb_led
...
Extend RGB LED with Printer Events
2017-04-11 15:16:57 -05:00
Scott Lahteine
dac21ec680
Add support for an RGBW LED
2017-04-11 12:58:55 -05:00
Scott Lahteine
e7746ffee4
Extend RGB LED support, adding Printer Events
2017-04-11 12:15:41 -05:00
Scott Lahteine
c7063eb55c
theTarget => target_temp
2017-04-11 12:15:41 -05:00
Scott Lahteine
36bda2bade
Add HAS_RESUME_CONTINUE shorthand macro
2017-04-11 12:15:40 -05:00
Scott Lahteine
53e6c33c37
2 is DXC_DUPLICATION_MODE
2017-04-11 12:15:40 -05:00
Scott Lahteine
a2cb0a3d54
Use multiply for delta probe constraint
2017-04-11 12:15:40 -05:00
Scott Lahteine
6487c96a4a
Merge pull request #6313 from Kaibob2/patch-10
...
Allow 10mm Movements for Z-Axis
2017-04-11 12:04:10 -05:00
Kai
001bc14255
Allow 10mm Movements for Z-Axis
...
I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version.
If this is unwanted, please just close this PR
2017-04-11 18:39:26 +02:00
Scott Lahteine
6a9b008044
Fix MINIMUM_STEPPER_PULSE maths
2017-04-11 11:11:17 -05:00
Scott Lahteine
68773f4486
Simplify stepper macros by renaming enable/disable macros
2017-04-11 11:10:26 -05:00
Scott Lahteine
e02a5a6371
Add macros for delays by machine cycle
2017-04-11 09:18:32 -05:00
Scott Lahteine
ecc537015a
Have M109 / M190 do nothing with no parameters
2017-04-11 05:06:25 -05:00
Scott Lahteine
03aa9a390e
Apply coding standards to M100, break up into functions
2017-04-10 21:09:43 -05:00
Scott Lahteine
48c16fc6ef
Merge pull request #6307 from thinkyhead/rc_less_no_reentrance
...
Only lcd_synchronize needs no_reentry
2017-04-10 20:58:32 -05:00
Scott Lahteine
4fcfe926d6
Only lcd_synchronize needs no_reentry
2017-04-10 20:13:23 -05:00
Scott Lahteine
67fb7f82ac
Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade
...
Save / restore z_fade_height in EEPROM
2017-04-10 20:05:20 -05:00
Scott Lahteine
eff5af569b
Merge pull request #6300 from MagoKimbra/rc_fix_mesh_report
...
Fix mbl_mesh_report
2017-04-10 19:37:19 -05:00
Scott Lahteine
4a18968c10
Merge pull request #6297 from Kaibob2/patch-9
...
Fix EPROM -> EEPROM
2017-04-10 19:35:30 -05:00
Roxy-3D
ba85faabc0
Fix M100 Free Memory Checker
...
M100 had numerious changes and quit working. Part of the problem is
the overloading of the SERIAL_PROTOCOL functions. Also, some of the
address arithmatic was changed to use char *ptr and passing ptr into the
SERIAL_PROTOCOL functions caused them to try to print a string instead
of a number. M100 is working again. Let's keep it that way!
M100 has been expanded to now have a function int
free_memory_is_corrupted() that can be called from other code to see if
the free space is still contiguous. It may make sense to add a flag to
control its verbose nature but right now, the extra chit chat is very
helpful to know int free_memory_is_corrupted() is doing the right thing
and what it found at various points when it was called. A 'Show &
Tell' is coming up with int free_memory_is_corrupted().
2017-04-10 15:33:55 -05:00
Kai
3b82db5fe9
Missing semicolon in ultralcd.cpp
...
When PARK_HEAD_ON_PAUSE is defined Marlin won't compile because of two missing semicolon.
2017-04-10 14:45:51 -05:00
MagoKimbra
7d2e637867
Fix mbl_mesh_report
2017-04-10 20:50:19 +02:00
Kai
afeb0452ef
Fix EPROM -> EEPROM
...
These fixes are neede because before it showed the englisch text even if language = de was selected
2017-04-10 18:37:00 +02:00
Scott Lahteine
7f950a80c0
Make ADC sensor reading frequency adjustable
2017-04-09 22:18:21 -05:00
Scott Lahteine
786af73e24
Convert config code to a static class
2017-04-09 22:06:41 -05:00
james94jeans2
5b9476fe78
Added z_fade_height to EEPROM-Settings
...
Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>,
after each reset or loading settings from EEPROM. Added the float
z_fade_height to EEPROM-Storage, now remembers the value.
2017-04-09 21:16:58 -05:00
Scott Lahteine
9343f6a95f
Put TOSHIBA with other stepper driver options
2017-04-09 20:52:49 -05:00
Scott Lahteine
7a704af5e6
Merge pull request #6284 from thinkyhead/rc_wt150_rebase
...
wt150 (Mightyboard Rev E) & RRD Full Graphic Smart Controller
2017-04-09 20:27:44 -05:00
Max Matveev
2031fb913b
Fixed comparison of float values to NaN
2017-04-09 20:28:46 +02:00
Scott Lahteine
e48a52a530
Patch a display issue with LCD_DECIMAL_SMALL_XY
...
The `ftostr4sign` function got munged by the `WITHIN` patch
2017-04-09 10:25:35 -05:00
Scott Lahteine
1a3cd6a090
Merge pull request #6213 from thinkyhead/rc_gitattributes
...
Init bed_level_virt_interpolate on EEPROM load
2017-04-09 08:13:11 -05:00
Scott Lahteine
314a02e2d5
Toggle with XOR
2017-04-09 07:58:47 -05:00
Scott Lahteine
8bc0d90b00
Init bed_level_virt_interpolate on EEPROM load
2017-04-09 07:04:20 -05:00
MD
20dd5376b8
Cheaptronic V2
...
Add support for new electronics
www.reprapobchod.cz
2017-04-09 06:57:43 -05:00
Scott Lahteine
4cdda5615b
Bring other configs up to date with wt150 changes
2017-04-09 06:45:42 -05:00
Paweł Stawicki
9b0885f4f6
Allow boards without a thermistor
2017-04-09 06:45:41 -05:00
Paweł Stawicki
64cfcebe66
Update SlowSoftI2CMaster link. MightyBoard digipots I2C bus has no resistors.
2017-04-09 06:45:03 -05:00
Paweł Stawicki
0eb16d9ff7
Add example config for the wt150 printer with RepRapDiscount Full Graphic Smart Controller
2017-04-09 06:44:54 -05:00
Paweł Stawicki
652bedfa18
Add RepRapDiscount Full Graphic Smart Controller support to MIGHTYBOARD REVE
2017-04-09 06:44:53 -05:00
Paweł Stawicki
44cdebb8f1
Add software spi support for max6675
2017-04-09 06:44:53 -05:00
Paweł Stawicki
191fec009f
Add digipot i2c control for MCP4018
2017-04-09 06:44:53 -05:00
Scott Lahteine
e5b16081cb
Update TinyBoy2 configurations
2017-04-09 06:44:53 -05:00
Scott Lahteine
1855534f20
Config files cleanup
2017-04-09 06:44:52 -05:00
Scott Lahteine
c26a315d0b
Additional missed patches
2017-04-09 04:24:23 -05:00
Scott Lahteine
39617e10b8
Patch configs comment formatting
2017-04-09 03:49:16 -05:00
Scott Lahteine
c54f6cf23d
Updates to support 5 extruders
2017-04-09 03:49:16 -05:00
Scott Lahteine
2b88ccd0aa
Apply UBL mesh bounds to remaining configs
2017-04-09 03:49:15 -05:00
Scott Lahteine
60be3d264b
Macros to print floats, hiding imprecision
2017-04-09 03:48:40 -05:00
Scott Lahteine
b356d73239
Merge pull request #6278 from thinkyhead/pr_delta_angles
...
Followup to additional delta trim options
2017-04-08 22:25:57 -05:00
Jimmy Envall
f78d44e91a
Added support for delta tower angle corrections.
2017-04-08 21:13:44 -05:00
Scott Lahteine
d3b4d84586
Merge pull request #6277 from thinkyhead/pr_roxy3d_rcbugfix
...
Unify UBL Command Parsing
2017-04-08 20:17:46 -05:00
Scott Lahteine
d4ce839351
Cleanup following Pins Debug update
2017-04-08 18:59:57 -05:00
Scott Lahteine
c7a8f7970b
Formatting / cleanup
2017-04-08 18:59:57 -05:00
Scott Lahteine
29d4ec8257
Support 5 extruder auto fans
2017-04-08 18:59:57 -05:00
Scott Lahteine
824f3c1c0d
Fix up configuration comments
2017-04-08 18:59:56 -05:00
Scott Lahteine
995ed90248
Clean up Filament Width Sensor comments
2017-04-08 18:59:56 -05:00
Scott Lahteine
5a7b810fdd
General comment cleanup
2017-04-08 18:58:33 -05:00
Scott Lahteine
0027c22839
Drop extraneous calls to lcd_update
2017-04-08 18:58:33 -05:00
Scott Lahteine
d6db7a9b03
patch "step_remaining"
2017-04-08 18:13:20 -05:00
Scott Lahteine
cbc2331187
Use LCD_MESSAGEPGM over lcd_setstatuspgm
2017-04-08 18:04:39 -05:00
Scott Lahteine
3729510b1e
Set and check main parameter values, report all errors
2017-04-08 17:15:55 -05:00
Roxy-3D
34d3ed9ab1
These items were removed from the UBL Command Parsing
...
Having these items randomly (and errorniously) disappear cost me several
hours of work yesterday.
2017-04-08 15:30:20 -05:00
Scott Lahteine
15edb41cee
Patches to UBL
2017-04-08 14:59:14 -05:00
Roxy-3D
14cf527bb8
Getting setup for debugging
2017-04-08 14:59:14 -05:00
Scott Lahteine
f8408036f2
Merge pull request #6264 from thinkyhead/rc_five_extruders
...
Support up to 5 extruders in Marlin
2017-04-07 12:48:56 -05:00
Bob-the-Kuhn
f7fc49c3a3
Finish name change
...
DAC_STEPPER_DFLT wasn't changed to DAC_MOTOR_CURRENT_DEFAULT in all
places on PR #6124
2017-04-07 11:05:24 -05:00
Scott Lahteine
832064e4f2
Implementation changes to support 5 extruders
2017-04-07 10:46:37 -05:00
Scott Lahteine
04050237f0
Header and pins changes to support 5 extruders
2017-04-07 10:46:36 -05:00
Scott Lahteine
2a84122edd
Configuration changes to support 5 extruders
2017-04-07 10:46:35 -05:00
Scott Lahteine
edf18977c1
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
Scott Lahteine
dc84678fc1
Fix HOTEND_STATUS_ITEM for graphical display
2017-04-06 23:07:30 -05:00
Scott Lahteine
a0de5d94e2
Merge pull request #6258 from benlye/benlye-bilinearfix2
...
Better fix for bilinear Z offset and G29 Z (update to #6251 )
2017-04-06 20:51:57 -05:00
Scott Lahteine
b23aef5b8d
Merge pull request #6190 from Bob-the-Kuhn/Stop-and-Kill-prints---round-2
...
Message for every KILL and STOP (also need delays)
2017-04-06 20:40:12 -05:00
Roxy-3D
945303c0d5
eleminate bootscreen.h
2017-04-06 19:55:41 -05:00
Roxy-3D
ef3da3971e
Update ubl.h
2017-04-06 19:55:41 -05:00
Roxy-3D
8644dc170b
get synchronized to current file names
2017-04-06 19:55:41 -05:00
Roxy-3D
1451b7eacf
UBL's Grid Based Leveling code
...
Pretty much... The code is in place. Still more work to do. But it
has a lot of hooks and variables in other code, so commit and merge
before I pick up a million 'Conflicts'.
2017-04-06 19:55:41 -05:00
Bob-the-Kuhn
549055f20c
Merge pull request #6124 from Bob-the-Kuhn/MCP4728-consistency
...
MCP4728 consistency & fix ultralcd.cpp (PRINTRBOARD Rev F and RIGIDBOARD V2)
2017-04-06 16:35:50 -05:00
Bob-the-Kuhn
a77875c9d2
Merge pull request #6114 from Bob-the-Kuhn/try2-add-BLTouch-retry
...
Another BLTouch retry place (replaces PR #6108 )
2017-04-06 16:25:55 -05:00
Bob-the-Kuhn
3b9ff2cb12
Merge pull request #5676 from Bob-the-Kuhn/configuration.h
...
Configuration.h - reword Z PROBE section
2017-04-06 16:18:34 -05:00
Bob-the-Kuhn
6643d553f6
# This is a combination of 2 commits.
...
# This is the 1st commit message:
MCP4728 consistency & fix ultralcd.cpp
The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.
PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.
This change moves the default settings to Configuration_adv.h.
Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp
===========================================================
reword stepper curent section for clarity
===========================================================
change name & improve comments
===========================================================
changed name from A4JP to SCOOVO_X9H per PR #6139
# This is the commit message #2 :
fix typo
2017-04-06 16:16:27 -05:00
Bob-the-Kuhn
a44b3432c1
add BLTouch retry to a second place & add/update delays
...
=================================================
implement requested changes
=================================================
remove delays (they're in another PR) & move return
2017-04-06 16:13:07 -05:00
Bob-the-Kuhn
a5abc61fb9
Merge pull request #6219 from Bob-the-Kuhn/Servo-probe-and-toggle-pins
...
M43 - add Toggle utility and Z servo utility (replaces PR #5864 )
2017-04-06 16:10:50 -05:00
Bob-the-Kuhn
3b8926bd09
improved wording, consolidation of info, BLTouch warning
...
==============================================
clarified BLTouch calculation & changed comment delimitters/flags
I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */
Made the BLTouch calculation simpler and clarified the units of measure
for the result.
============================================
add changes to example configurations
============================================
add TinyBoy2 to this PR & add BLTouch Delay
2017-04-06 16:06:01 -05:00
Scott Lahteine
55d296aaf0
pinsDebug with more features, uses less RAM
...
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.
Includes support for 1284 & 1286 families.
Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
. without 52576
. with new 64592
. with old 62826
. new-out 12016
. old-out 10250
. new-old 1766
.
RAM
. without 2807
. with new 2875
. with old 3545
. new-out 68
. old-out 738
. new-old -670
==================================================================
minor changes - mostly formatting
1) added newline to end of teensyduino file
2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings
about redefining TEENSYDUINO
3) removed some trailing spaces
reduce PROGMEM size & update pin list
Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function
This required creating two arrays of address pointers for the PWM
registers.
==================================================================
update with new M3, M4, M5 pin names
==================================================================
report I/O status for unused/unknown pins
2017-04-06 16:06:01 -05:00
Scott Lahteine
e116723b8b
Adjust indentation in ubl.h
2017-04-06 16:06:00 -05:00
Scott Lahteine
1b3a26f2f5
Rename all UBL files with a ubl_ prefix
2017-04-06 16:06:00 -05:00
Scott Lahteine
d13991ae18
Use same config name for all mesh dimensions
2017-04-06 16:05:59 -05:00
Bob-the-Kuhn
f9686a108c
add Z servo test and toggle pins to M43
2017-04-06 15:59:38 -05:00
Scott Lahteine
62cbaa302e
Z_DUAL_ENDSTOP - make offset a configuration item
...
The offset for Z_DUAL_ENDSTOP (z_endstop_adj) is already in Marlin.
This PR just makes it a configuration item.
z_endstop_adj is initialized in two places so both had to be modified.
2017-04-06 15:57:10 -05:00
Scott Lahteine
c9e35004e7
pinsDebug with more features, uses less RAM
...
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.
Includes support for 1284 & 1286 families.
Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
. without 52576
. with new 64592
. with old 62826
. new-out 12016
. old-out 10250
. new-old 1766
.
RAM
. without 2807
. with new 2875
. with old 3545
. new-out 68
. old-out 738
. new-old -670
==================================================================
minor changes - mostly formatting
1) added newline to end of teensyduino file
2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE. Got warnings
about redefining TEENSYDUINO
3) removed some trailing spaces
reduce PROGMEM size & update pin list
Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function
This required creating two arrays of address pointers for the PWM
registers.
==================================================================
update with new M3, M4, M5 pin names
==================================================================
report I/O status for unused/unknown pins
2017-04-06 14:46:28 -05:00
Scott Lahteine
4abd53f65a
Adjust indentation in ubl.h
2017-04-06 05:36:16 -05:00
Scott Lahteine
f5c5c1f771
Rename all UBL files with a ubl_ prefix
2017-04-06 05:33:27 -05:00
benlye
f1d50ac1dc
Fixing bilinear Z offset and G29 Z
...
The fix in #6251 for bilinear Z offset was flawed and broke the Z parameter of G29 for bilinear levelling. This is reverted and a different fix is used for the double-addition of the Z-probe offset to the bilinear correction grid.
2017-04-06 07:41:46 +01:00
Scott Lahteine
eb1e6aa29b
Use same config name for all mesh dimensions
2017-04-06 00:42:52 -05:00
Scott Lahteine
c961dd084d
Add hidden option to output Bilinear grids in JSON
2017-04-05 23:43:17 -05:00
Scott Lahteine
df7b4252fd
Reduce M420 code for UBL slightly
2017-04-05 22:30:29 -05:00
Scott Lahteine
8866158d03
Add LEVELING_DATA as a capability
2017-04-05 22:30:28 -05:00
benlye
0a2b4f3486
Fix bilinear levelling z offset
...
Since run_probe was altered to return the probe Z position rather than the nozzle Z position bilinear levelling has been broken because the Z-offset has been applied twice - once in the run_probe function, and then again in the G29 code for bilinear levelling.
2017-04-05 22:01:40 -05:00
Scott Lahteine
44a849bdce
Fix broken M206/M428/G92 offsets
2017-04-05 22:01:37 -05:00
Roxy-3D
52978e5ba5
Fix spelling mistake when UBL's mesh is Inactive
2017-04-02 20:07:09 -05:00
Roxy-3D
0423e93c42
Fix M421 AUTO_BED_LEVELING_BILINEAR and AUTO_BED_LEVELING_UBL
...
M421 was not connected up for AUTO_BED_LEVELING_BILINEAR.
M421 needed to migrate mesh data to new UBL EEPROM layout.
2017-04-02 16:46:37 -05:00
Scott Lahteine
3412950abc
Merge pull request #6209 from thinkyhead/rc_psu_zero
...
Power Supply 0 as "General"
2017-04-02 16:44:42 -05:00
Roxy-3D
3e9e94801f
Fix problem described in issue # 6175
...
As it turns out... an unsigned int can not go to less than 0, so the
loop never terminates.
2017-04-02 13:00:27 -05:00
Scott Lahteine
289e3d6844
Merge pull request #6215 from thinkyhead/rc_bed_false_alarm
...
Fix thermal runaway when nonexistent bed temp is set
2017-04-02 11:59:58 -05:00
Scott Lahteine
948728e63b
Fix line-endings in UBL_G29
2017-04-02 11:48:26 -05:00
Scott Lahteine
699310d1d2
Fix: Thermal runaway if nonexistent bed's temp is set
2017-04-02 11:48:10 -05:00
Scott Lahteine
c56eec29f0
Configurable delay for BLTouch servo emulation
2017-04-02 11:14:53 -05:00
Scott Lahteine
deaad78df9
Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap
...
G38 bug fix, made double touch optional & reverted to Z_MIN_PROBE
2017-04-02 10:32:04 -05:00
Scott Lahteine
5bce731962
Fix LCD preheat menus
2017-04-02 09:32:22 -05:00
Scott Lahteine
4c72167af3
Prevent a warning on echo_command
2017-04-02 08:36:58 -05:00
Scott Lahteine
9b5fd9522e
Fix formatting, order for a UBL change
2017-04-02 07:15:40 -05:00
Tannoo
54173c80ad
Power Supply 0 as "General"
2017-04-02 06:21:34 -05:00
Scott Lahteine
a2775d0c70
can wstring be removed?
2017-04-02 04:43:33 -05:00
Scott Lahteine
de4e19f17e
Patch MarlinSerial to match up with 32-bit version
2017-04-02 04:39:18 -05:00
Scott Lahteine
2cbc7b4b73
Relocate serial macros and functions
2017-04-02 01:05:25 -05:00
Scott Lahteine
eaa66f3c46
Indent MarlinSerial code
2017-04-02 01:05:25 -05:00
Scott Lahteine
7a7a80e6c5
status_printf => lcd_status_printf_P
2017-04-02 01:05:25 -05:00
Scott Lahteine
0e6ec34228
Use PSTR versions of lcd_status... to save SRAM
2017-04-02 00:45:39 -05:00
Scott Lahteine
34e2420b9b
Apply const args, clean up find_closest_circle_to_print
2017-04-01 23:15:41 -05:00
Scott Lahteine
e19fbd27ce
Minor spelling patch
2017-04-01 23:08:00 -05:00
Scott Lahteine
790a3e9a8c
Remove extraneous check of UBL_G26_MESH_EDITING
2017-04-01 23:03:40 -05:00
Scott Lahteine
7310110ec0
Fix logic of UBL::fade_scaling_factor_for_z
2017-04-01 22:52:48 -05:00
Scott Lahteine
1a775cecac
Revert behavior of enqueue_and_echo_commands_P
2017-04-01 21:53:46 -05:00
Scott Lahteine
79d42d87c1
Syntax cleanup
2017-04-01 21:53:46 -05:00
Scott Lahteine
b47fd31c37
Revert some changes to UBL
2017-04-01 21:53:45 -05:00
Bob-the-Kuhn
185337e787
add delays to allow stop & kill messages to get out
2017-04-01 00:23:14 -05:00
Scott Lahteine
63abb65146
Update description of PINS_DEBUGGING
2017-03-31 18:57:48 -05:00
Scott Lahteine
73e193da1d
Implement LCD_BED_LEVELING for PROBE_MANUALLY
2017-03-31 11:50:18 -05:00
Scott Lahteine
fcadc7bb1a
Implement the "manual" option for ABL
2017-03-31 11:50:18 -05:00
Scott Lahteine
9e22184936
Add a "manual" option for ABL
2017-03-31 11:50:18 -05:00
Scott Lahteine
541165e878
Merge pull request #6181 from thinkyhead/rc_ubl_further_fixes
...
Further adjustments to UBL code
2017-03-31 11:35:02 -05:00
Scott Lahteine
b19a15fa7f
Within applied to UBL
2017-03-31 11:12:57 -05:00
Scott Lahteine
342ee458ae
Additional UBL fixes, optimizations
2017-03-31 11:12:57 -05:00
Scott Lahteine
a5e085cbea
Have run_probe() return probe Z, not nozzle Z
2017-03-31 09:27:49 -05:00
Scott Lahteine
4487d22d56
Apply FIXFLOAT macro
2017-03-31 09:27:48 -05:00
Scott Lahteine
6cac0f43eb
MBL fiddle
2017-03-31 09:27:48 -05:00
Scott Lahteine
25a6bfa7ed
Add and apply WITHIN macro
2017-03-31 09:27:48 -05:00
Scott Lahteine
81136c1e82
Merge pull request #6177 from thinkyhead/rc_tinyboy
...
Support for TinyBoy 2 3D printer (and its OLED display)
2017-03-31 04:31:47 -05:00
Scott Lahteine
93aad54dc1
Clean up code, remove _now command function
2017-03-31 04:17:31 -05:00
Stefan Brüns
6ba6c92a81
Add example configuration for TinyBoy L10/L16
...
The TB2 is a Indiegogo funded 3d printer. It uses a MKS SMELZI V1.0
main board (based on MELZI, i.e. Sanguinololu). I comes as a complete kit,
including display and panel.
Two variants exists, L10 and L16, with a height of 100 and 160 mm.
The heating function of the provided bed can enabled by soldering a
thermistor and some wires to it.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-31 04:05:35 -05:00
Stefan Brüns
0fe57ad4f5
Add Support TinyBoy2 OLED/Encoder panel
...
The OLED is driven by an SSD1306, connected to the board via
I2C, the rotary encoder is connected to 3 GPIO pins.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-31 04:05:34 -05:00
Scott Lahteine
65ca6472ba
Make G26 compatible with G92 and M206
2017-03-31 02:20:20 -05:00
Scott Lahteine
4902fd4e95
More data in UBL class, make it a static class
...
- Make all `unified_bed_leveling` data/methods static
- Move some UBL-related variables into the class
- Replace `map_[xy]_index_to_bed_location` with `mesh_index_to_[xy]pos`
2017-03-31 02:20:20 -05:00
Scott Lahteine
edbc024d76
Disable UBL_G26_MESH_EDITING by default
2017-03-31 02:20:20 -05:00
Scott Lahteine
9e4bd6b3b5
Further repairs to UBL, comments, spacing
2017-03-31 02:20:20 -05:00
Bob-the-Kuhn
f3618c3337
Reduce UBL RAM usage by making G26/G29 optional
2017-03-31 02:20:19 -05:00
Scott Lahteine
c9eb1d6ab7
Make MBL a static class, use lookup for index-to-point conversion
2017-03-31 01:28:07 -05:00
Scott Lahteine
de9d2cddc3
Merge pull request #6152 from thinkyhead/rc_cleanup_6150_etc
...
UBL cleanup, optimization
2017-03-30 17:40:29 -05:00
Scott Lahteine
9217e4b8ec
Various UBL cleanups and bug fixes
2017-03-30 17:09:49 -05:00
Scott Lahteine
9924199802
Merge pull request #5908 from thinkyhead/rc_fix_slowdown
...
General minor cleanup
2017-03-29 21:43:33 -05:00
Scott Lahteine
0e71e7b2fb
Cleanup to planner.cpp
2017-03-29 06:48:07 -05:00
Scott Lahteine
f105cad43c
Marlin: Slight cleanup to Marlin_main.cpp
2017-03-29 06:40:29 -05:00
Scott Lahteine
499f9e04e1
Marlin: Temperature soft-PWM cleanup
2017-03-29 06:37:27 -05:00
Scott Lahteine
7ddd94dc61
Merge pull request #5994 from StefanBruens/fix_Makefile_errors
...
Fix makefile errors, cleanup
2017-03-29 06:32:08 -05:00
Scott Lahteine
af09095f03
Merge pull request #6154 from thinkyhead/rc_fil_sensor_vs_sd
...
Show Filament Width on LCD when SD is disabled
2017-03-29 05:24:48 -05:00
Remo Kallio
d38b1bc4b1
Show filament width sensor values in LCD constantly if SD card support is not enabled.
2017-03-29 04:03:08 -05:00
Scott Lahteine
e3459ec178
Merge pull request #5989 from MagoKimbra/rc_fix_delta_angles
...
Fix delta_angles
2017-03-29 03:35:18 -05:00
Scott Lahteine
f49aec057f
Tweak "can not" => "can't" in RUMBA pins
2017-03-29 01:04:50 -05:00
Scott Lahteine
0a23a1bb3b
Dynamic feedrate on SCARA, converting target mm/s to deg/s
2017-03-28 17:21:07 -05:00
Roxy-3D
d8724bb546
Get G29's P1 (Automated Probing) working again.
...
Incorrect optimizations of data types and ternary operators caused some
issues.
2017-03-28 17:11:02 -05:00
Scott Lahteine
c7f6ee9c93
Board A4JP should be SCOOVO_X9H
2017-03-27 22:22:13 -05:00
Scott Lahteine
a9fc30ae2e
Use safe_delay to ensure watchdog reset
2017-03-26 23:49:56 -05:00
Roxy-3D
171904b6c7
Make G29 What command print reliably and fix G29 P1 bug Waldo found
2017-03-26 17:05:58 -05:00
Roxy-3D
9d3ac66f73
Map clean up of UBL
...
UBL's maps are cleaner. And with a 1 value, G29 O 1 will generate a
map suitable to be Cut & Pasted into Excel so a Suface Map can be
generated.
2017-03-25 18:55:05 -05:00
Roxy-3D
9a1949a91e
Cleaned up G26 ready to replace existing one at MarlinFirmware/Marlin
2017-03-25 10:15:40 -05:00
Roxy-3D
aec85ad45a
Start of process to get UBL running again.
...
The wait_for_user change totally broke UBL. But there is stuff wrong
now in the thermal code and/or LCD Panel code.
2017-03-24 18:38:27 -05:00
Scott Lahteine
b47eaf14ae
Merge pull request #6109 from thinkyhead/rc_soft_pwm_dither
...
PWM dithering followup
2017-03-24 18:21:07 -05:00
Scott Lahteine
34d1c41b5f
Merge pull request #6111 from benlye/benlye-patch-echo_command
...
Fix type conversion issue with echo_command
2017-03-24 17:57:28 -05:00
benlye
6a601aca35
Fix type conversion issue with echo_command
...
With the the current definition of echo_command I cannot compile RCBugFix (Arduino IDE 1.8.1) with the error "invalid conversion from 'const char*' to 'char*'". This change resolves that.
2017-03-24 17:23:02 +00:00
Scott Lahteine
009a6ddd39
Adjust bilinear grid in M851
2017-03-24 06:28:59 -05:00
Scott Lahteine
eab7854a73
Merge pull request #6074 from thinkyhead/rc_immediate_shove
...
Immediate commands take precedence
2017-03-24 05:52:27 -05:00
Stefan Brüns
5699e2b881
Add SOFT_PWM_DITHER to other configurations
2017-03-24 05:02:24 -05:00
Scott Lahteine
5a2abeca78
Merge pull request #6100 from thinkyhead/rc_soft_pwm_dither
...
Enhancement of PWM, with dithering
2017-03-24 04:57:40 -05:00
Scott Lahteine
043be2856b
Use "& 0x3F" instead of "% 64"
2017-03-24 04:13:50 -05:00
Stefan Brüns
6a040a6967
SOFT_PWM: Do not switch off heaters twice on pwm_count wraparound
...
After wraparound, pwm_count <= pwm_mask holds, thus soft_pwm_X <= pwm_count
guarantees soft_pwm_X < pwm_mask is true, and the heater will be switched
off in the first branch.
Do not evaluate the pwm conditions a second time, this reduces the
instruction count (4 instructions per PWM) and text size (6 byte).
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:50 -05:00
Stefan Brüns
0a74774af1
soft_pwm: avoid useless refetches of pwm_count
...
The compiler is not able to reuse the value of pwm_count, but reloads it
on every evaluation, if is stored in a static variable, as it cannot prove
it will be unchanged. A variable with local scope may not be modified from
the outside, so its value can be reused.
Doing so reduces text size and instruction count.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:50 -05:00
Stefan Brüns
35a55d5757
SOFT_PWM: Implement dithering if SOFT_PWM_SCALE is 1 or more
...
If dithering is enabled, the remainder of the soft_pwm_X duty value at
turnoff time is added to the next cycle. If e.g. the duty is set to 9 and
SCALE is set to 2, the PWM will be active for 8 counts for 3 cycles and
12 counts on each fourth cycle, i.e. the average is 9 cycles.
This compensates the resolution loss at higher scales and allows running
fans with SOFT_PWM with significantly reduced noise.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:36 -05:00
Stefan Brüns
2aed66a955
temperature: Fix SOFT_PWM off by one
...
A 128 step PWM has 127 intervals (0/127 ... 127/127 duty). Currently, a
PWM setting of 1/127 is active for 2/128, i.e. double the expected time,
or, in general n+1/128 instead of n/127.
Fixes issue#6003.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-24 04:13:36 -05:00
Scott Lahteine
b5711a99a2
Patches to bring UBL closer to compliance
2017-03-24 01:37:52 -05:00
Scott Lahteine
d076c1b604
Apply some general cleanup to code
2017-03-24 01:37:51 -05:00
Scott Lahteine
d1e6b0e21a
Reduce STEP_PULSE_CYCLES code slightly
2017-03-24 00:50:05 -05:00
Scott Lahteine
783338a0b8
Add UBL_MESH_EDIT_ENABLED to configs
2017-03-24 00:44:55 -05:00
Scott Lahteine
8d54ffbf05
Adjust vector_3 code with const, some optimization
2017-03-23 19:41:42 -05:00
Roxy-3D
8ee2612ebb
The hex nibble routine can print again!
...
The code to print a hex nibble got broke. SERIAL_ECHO( (char) ) isn't
suitable for its use.
2017-03-23 16:08:37 -05:00
Roxy-3D
b8e4a6970b
Get UBL up and running again
...
All the changes to get the code into compliance with Marlin coding
standards made UBL sick. This pretty much gets UBL back up and
running.
2017-03-23 16:08:37 -05:00
Roxy-3D
5de1da2b3c
Make UBL honor the #define ENABLE_LEVELING_FADE_HEIGHT option
2017-03-23 16:08:37 -05:00
Scott Lahteine
8f9face956
Merge pull request #6088 from rafaljot/patch-3
...
Update Marlin_main.cpp
2017-03-23 01:51:51 -05:00
Scott Lahteine
782634b6c9
Merge pull request #6081 from Sebastianv650/MIN_STEPPER_PULSE_for_Babystepping
...
Add MINIMUM_STEPPER_PULSE ability to babystepping
2017-03-22 21:57:36 -05:00
Scott Lahteine
af2ea23e9c
EXTRUDER_RUNOUT_PREVENT uses buffer_line_kinematic
2017-03-22 20:51:12 -05:00
Scott Lahteine
cd882b88db
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
Scott Lahteine
e244399766
Additional cleanup of UBL code
2017-03-22 20:51:10 -05:00
Bob-the-Kuhn
0934563b97
G38 optional double touch
...
Made the double touch portion a conditional compile based on the
PROBE_DOUBLE_TOUCH flag.
==============================================
Bugfix
The current G38 only stopped a move if it involved the Z axis.
Moved all the G38 code to it's own section and put it where it would
always be executed no matter what axis was moving or if the endstop was
enabled.
Also added a comment to configuration_adv to alert the user the double
tap had to be turned on.
==============================================
Change G38 back to using Z_MIN_PROBE
There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them
set to the top of the gantry.
G38 started out as using the Z_MIN_PROBE pin. I don't remember why we
changed it to the Z_MIN endstop.
2017-03-22 15:08:49 -05:00
Scott Lahteine
cc3204509c
UBL patch from Bob-the-Kuhn
2017-03-22 07:54:20 -05:00
Scott Lahteine
b904b5ae8d
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
Sebastianv650
bf57eb2447
Protect Babystepping against other ISRs
...
Especialy against stepper ISR.
This is even more important when a minimum pulse width is set,
increasing the runtime of a babystep.
2017-03-21 18:05:44 +01:00
Sebastianv650
80830919dc
Add MINIMUM_STEPPER_PULSE ability to babystepping
2017-03-21 17:50:38 +01:00
rafaljot
6da949bbf0
Update Marlin_main.cpp
...
Sometimes after killing heaters are still on.
2017-03-21 15:06:01 +01:00
Roxy-3D
72f7b14e66
Make G29's Interactive Mesh Editor Work
2017-03-20 12:52:51 -05:00
Roxy-3D
3fd74b121f
Get G29's Interactive Mesh Editor running
...
G29 P4 R O should work now.
2017-03-20 12:52:51 -05:00
Roxy-3D
1d58558bec
Spelling fix
2017-03-20 12:52:51 -05:00
Scott Lahteine
2573f4dd05
Merge pull request #6052 from thinkyhead/rc_lift_on_pause
...
Add PARK_HEAD_ON_PAUSE feature / M125
2017-03-20 03:36:31 -05:00
Scott Lahteine
48c6284c91
Immediate commands take precedence
2017-03-19 21:50:48 -05:00
Roxy-3D
76c270fdf2
Allow FWRETRACT with UBL Enabled
...
The retraction flag in UBL's G26 was conflicting with the FWRETRACT option.
All fixed!
2017-03-19 15:43:12 -06:00
Roxy-3D
c377c59d47
Allow G29 P1 R to generate the mesh
...
Fix the logic change that happened when UBL got merged.
2017-03-19 15:13:33 -06:00
Scott Lahteine
ff0dd162b7
PARK_HEAD_ON_PAUSE implementation
2017-03-19 07:27:35 -05:00
Scott Lahteine
26473cab6d
Add PARK_HEAD_ON_PAUSE feature
2017-03-19 05:06:55 -05:00
Scott Lahteine
4cf51157b3
Use XYZE rather than NUM_AXIS
2017-03-19 01:14:39 -05:00
Scott Lahteine
4c7f14752a
Add disable_e_steppers function
2017-03-19 01:14:39 -05:00
Scott Lahteine
8eb29f91e6
Patch filament change options and beep code
2017-03-19 01:14:39 -05:00
Scott Lahteine
56c9dfc83b
Merge pull request #6066 from thinkyhead/rc_felix_fix
...
Update Felix config for UBL
2017-03-19 01:11:02 -05:00
Scott Lahteine
9b2b53f63a
Merge pull request #6042 from thinkyhead/rc_fix_toolchange_z
...
Move Z last in tool-change for SWITCHING_EXTRUDER
2017-03-19 00:34:41 -05:00
Scott Lahteine
f98fb6b38e
Update Felix config for UBL
2017-03-19 00:28:48 -05:00
Scott Lahteine
7cabe81373
Merge pull request #6057 from thinkyhead/rc_followup_6054
...
Followup 6054 with some cleanup
2017-03-18 13:49:20 -05:00
Scott Lahteine
4bca27ab89
Fix Kelvin conversion
...
Thanks to @ospalh -- #6056
2017-03-18 13:23:08 -05:00
Scott Lahteine
143ab8f329
Remove Roxy's personal configurations
2017-03-18 12:35:02 -05:00
Scott Lahteine
2512871a36
Patch configs UBL followup
2017-03-18 12:32:03 -05:00
Scott Lahteine
27b5666e15
Move Allen Key probe definition to the top
2017-03-18 12:27:37 -05:00
Scott Lahteine
77cf648ed3
Move menu selection past static items in 1 screen
2017-03-18 12:26:21 -05:00
Scott Lahteine
2c630a1b5c
Merge pull request #6054 from thinkyhead/rc_ubl_renewal
...
UBL for RCBugFix — cleanup, rebase, patch
2017-03-18 12:07:57 -05:00
Scott Lahteine
0492a3a8f1
Merge pull request #6027 from Bob-the-Kuhn/add_kill_info
...
Message for every KILL and STOP
2017-03-18 11:49:35 -05:00
Scott Lahteine
6618346148
Patches to work around "register spill" compiler bug
2017-03-18 11:35:21 -05:00
Scott Lahteine
be7dd90382
Add Thermistor 75: MGB18 silicon pad
2017-03-18 11:35:20 -05:00
Scott Lahteine
b0a9c82c31
Fix single-char echo and pinMode usage
2017-03-18 11:35:20 -05:00
Scott Lahteine
fb60aa3736
UBL implementation
2017-03-18 11:35:20 -05:00
Scott Lahteine
238b8fd2a3
UBL core and support files
2017-03-18 11:35:19 -05:00
Scott Lahteine
cf94688925
Univeral Bed Leveling - configuration
2017-03-18 11:35:19 -05:00
Scott Lahteine
03aa424ccb
Merge pull request #6053 from thinkyhead/rc_clean
...
Remove extraneous whitespace
2017-03-18 03:26:45 -05:00
Scott Lahteine
af644871bf
Merge pull request #6045 from thinkyhead/rc_remove_raw_kinematics
...
Remove delta optimization concepts… for now
2017-03-18 03:26:24 -05:00
Scott Lahteine
77491dd924
Remove extraneous whitespace
2017-03-18 03:17:39 -05:00
Scott Lahteine
b865b21d32
Can't use Z fade height with DELTA
2017-03-17 08:34:47 -05:00
Scott Lahteine
1e57b0c269
Remove delta interpolation concept
2017-03-17 06:32:11 -05:00
Scott Lahteine
e46898f8e5
Remove kinematic optimizations
2017-03-17 06:30:22 -05:00
Scott Lahteine
11f1fdfab4
_lcd_level_bed_position => manual_probe_index
2017-03-17 06:05:17 -05:00
Scott Lahteine
0e410c9dfd
Software endstop options as simple switches
2017-03-17 06:05:17 -05:00
Scott Lahteine
d01b915085
Implement soft_endstops_enabled for clamping
2017-03-17 06:05:17 -05:00
Scott Lahteine
e4649c9044
Add HAS_SOFTWARE_ENDSTOPS macro
2017-03-17 06:05:17 -05:00
Scott Lahteine
3e927ff204
Replace MBL Z hacking
2017-03-17 06:05:17 -05:00
Scott Lahteine
4e53124681
Merge pull request #6039 from Bob-the-Kuhn/M114-sync-with-stepper
...
M114 - wait for move completion before reporting position
2017-03-17 05:22:46 -05:00
Scott Lahteine
734f9ea133
Merge pull request #6040 from thinkyhead/rc_sanity_use_assert
...
Simplify some sanity checks with static_assert
2017-03-17 05:22:17 -05:00
Scott Lahteine
f02af83d42
Remove some extraneous spaces
2017-03-16 23:59:11 -05:00
Scott Lahteine
672e45652e
Improved solution to tool-change bug
2017-03-16 23:59:10 -05:00
Scott Lahteine
23f1cfb46f
Fix stuck CHDK pin as suggested in #6041
2017-03-16 21:49:39 -05:00
Scott Lahteine
0b22069e82
Merge pull request #6021 from Bob-the-Kuhn/BUG-FIX--Switching-extruder-tool-change-Z-height
...
Bug Fix: Switching extruder tool change leaves Z in wrong position
2017-03-16 21:15:20 -05:00
Scott Lahteine
e7e4500629
Simplify some sanity checks with static_assert
2017-03-16 16:31:34 -05:00
Bob-the-Kuhn
34ff0c3439
M114 - wait for move completion before reporting position
2017-03-16 15:10:45 -05:00
Bob-the-Kuhn
b31604a492
Message for every KILL and STOP
...
No more mystery halts & resets
Moved messages to language.h
Added current command to inactive timeout message
2017-03-15 21:05:11 -05:00
Kai
13b44d019b
Update language_de.h
...
Addition of missing strings to match language_en.h
2017-03-15 16:06:52 +01:00
Bob-the-Kuhn
685ed5393a
Bug Fix: Switching extruder tool change leaves Z in wrong position
...
The tool_change function saves the current_position to the destination
array soon after starting. Later in the switching extruder section, the
destination array is modified when moving the Z axis up & down. A later
section of tool_change moves the head back to the “original location”
using the destination array. This later section assumes that the
destination array hasn’t been modified.
The fix is to save the destination Z position and then restore it after
the Z movements have completed.
Going back to using the current_position array for the switching
extruder Z axis moves (and leaving the destination array untouched)
doesn’t fix the problem.
This bug was introduced by the “Make tool_change kinematic compatible”
commit # 847429eff4
2017-03-14 02:36:24 -05:00
Scott Lahteine
51353f8fea
Merge pull request #6000 from trivalik/NoWorkspaceWarning
...
prevent warning with define of NO_WORKSPACE_OFFSETS
2017-03-12 00:00:51 -06:00
MagoKimbra
a4a9bd8bc9
Fix BUG set_position_mm
...
Set postion must have axis and not E_AXIS + active_extruder.
2017-03-11 14:13:39 +01:00
Trivalik
71ac6f9d42
prevent warning with define of NO_WORKSPACE_OFFSETS
2017-03-09 23:49:57 +01:00
Stefan Brüns
9ba6c051a1
Makefile: add nozzle.cpp too CXXSRC list
...
The file is required by the optional NOZZLE_PARK_FEATURE.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 03:08:49 +01:00
Stefan Brüns
9cc8d495b8
Makefile: remove no longer existing search paths
...
ArduinoAddons has been removed from Marlin, remove any references to it.
Replace HARDWARE_SRC and HARDWARE_DIR with its expanded equivalents.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 01:46:47 +01:00
Stefan Brüns
bf563e62c1
Makefile: add printcounter.cpp too CXXSRC list
...
The file is required by the optional PRINTCOUNTER feature.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 01:45:54 +01:00
Stefan Brüns
ddecc1441d
Makefile: Fix linker error
...
Instantiation of the static singleton instance thermalManager in general
requires locking, but we know its safe to do without.
Add -fno-threadsafe-statics to avoid using locking primitives, which
result in linking errors:
undefined reference to `__cxa_guard_acquire'
undefined reference to `__cxa_guard_release'
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-09 01:45:38 +01:00
MagoKimbra
37a26dfc09
Fix delta_angles
2017-03-08 09:23:30 +01:00
Scott Lahteine
2defb1d748
Use SET_INPUT_PULLUP where appropriate
2017-03-07 23:43:33 -06:00
Scott Lahteine
58b3e98878
Use arrays for delta tower parameters
2017-03-07 19:00:22 -06:00
Scott Lahteine
47242a40bb
Apply updated changes for delta_tower_angle_trim
2017-03-07 18:15:11 -06:00
Jimmy Envall
00b6b3da79
Added support for delta tower angle corrections.
2017-03-07 16:35:58 -06:00
Scott Lahteine
5a456c832a
Apply TMC2130 to example configurations
2017-03-07 04:22:06 -06:00
Scott Lahteine
45f949d833
TMC2130 Library: @teemuatlut replaces @makertum
2017-03-07 04:22:06 -06:00
Scott Lahteine
33f8a8a344
Merge pull request #5973 from thinkyhead/rc_circle_pattern
...
Add circle pattern to nozzle clean
2017-03-06 04:47:01 -06:00
Scott Lahteine
94b3e0a483
Merge pull request #5959 from benlye/benlye-fixm48
...
Remove extra carriage return in M48 V1 output
2017-03-06 04:24:28 -06:00
Scott Lahteine
a9a1971295
Merge pull request #5972 from thinkyhead/rc_cooldown_before
...
Fix preheat menu formatting
2017-03-06 03:21:29 -06:00
Scott Lahteine
6aa81255a9
Patch and clean up "flsun" kossel. Followup to #5911 .
2017-03-06 03:15:00 -06:00
Scott Lahteine
b2270b3f3e
Apply prior nozzle clean update
2017-03-06 03:14:59 -06:00
Marek Pikuła
7698c5617a
Added circle nozzle cleaning parameters to example configurations
2017-03-06 03:04:58 -06:00
Marek Pikuła
6836b94eea
Added circle pattern for nozzle cleaning feature
2017-03-06 03:03:00 -06:00
Scott Lahteine
3b75518ef6
Merge pull request #5911 from aphex3k/flsun_kossel_mini
...
Configuration.h and Configuration_adv.h for the kossel mini by flsun
2017-03-06 02:26:01 -06:00
Scott Lahteine
3830778852
Apply NO_WORKSPACE_OFFSETS to lcd menu
2017-03-06 02:21:42 -06:00
Scott Lahteine
7e3aab889d
Fix preheat menu formatting
2017-03-06 02:07:07 -06:00
Scott Lahteine
fea0d3f20f
Endstop and temp-isr general cleanup
2017-03-06 02:07:07 -06:00
Scott Lahteine
aef08e8780
Compact some macro substitutions
2017-03-06 02:07:07 -06:00
Scott Lahteine
2f620f86d9
Merge pull request #5970 from thinkyhead/rc_cooldown_before
...
Preheat Hotend Only menu items
2017-03-06 01:56:05 -06:00
Scott Lahteine
02de8e6f18
Merge pull request #5957 from MagoKimbra/rc_stepper_indirection_fix
...
Stepper indirection fix tmc driver
2017-03-06 01:16:40 -06:00
Scott Lahteine
6c5312559c
Menu item to preheat only the hotend
2017-03-06 01:14:54 -06:00
Scott Lahteine
9d0142e8ae
Move Change Filament above Cooldown
2017-03-06 01:13:12 -06:00
Scott Lahteine
0c55095c5e
Move Cooldown above Preheat
2017-03-06 01:13:12 -06:00
Scott Lahteine
c15c65f18a
Merge pull request #5971 from thinkyhead/rc_fix_e_factors
...
Patch DISTINCT_E_FACTORS bug
2017-03-06 01:11:17 -06:00
Scott Lahteine
bfb0007573
Patch DISTINCT_E_FACTORS bug
2017-03-05 23:19:31 -06:00
Scott Lahteine
be98016674
Merge pull request #5963 from thinkyhead/rc_no_offsets_optim
...
New option: NO_WORKSPACE_OFFSETS
2017-03-05 21:46:49 -06:00
Scott Lahteine
8e89a802f7
Document PROTOCOL_VERSION
2017-03-05 04:43:46 -06:00
Scott Lahteine
87b03b16bd
Use a macro for array copies
2017-03-05 04:43:46 -06:00
Scott Lahteine
e141f3a03f
Optimize coordinate transformation
...
Pre-compute the combined position shift and home offset to save a
single float fetch-and-add per conversion. Great for delta/scara and
bed leveling.
2017-03-05 04:43:16 -06:00
Scott Lahteine
5f7e85398b
Implement NO_WORKSPACE_OFFSETS
2017-03-05 04:43:15 -06:00
Scott Lahteine
05abe853f9
New option: NO_WORKSPACE_OFFSETS
2017-03-05 04:43:15 -06:00
Scott Lahteine
20addc6e32
Merge pull request #5955 from thinkyhead/rc_eeprom_fail_better
...
Display a message for EEPROM version mismatch
2017-03-04 17:15:07 -06:00
benlye
dead89062a
Update Marlin_main.cpp
...
Remove unnecessary line break from M48 V1 output.
2017-03-04 17:58:10 +00:00
MagoKimbra
ae277aebc6
Stepper indirection fix tmc driver
2017-03-04 12:17:39 +01:00
Scott Lahteine
8f4e4b1995
Display a message for EEPROM version mismatch
2017-03-04 01:20:36 -06:00
Scott Lahteine
177ad245f6
Merge pull request #5953 from thinkyhead/fix_fc_e_index
...
Fix submenu hotend status display
2017-03-04 00:12:29 -06:00
Scott Lahteine
cea3ea772c
Fix submenu hotend status display
2017-03-03 22:12:22 -06:00
Scott Lahteine
b27f69ba51
Merge pull request #5813 from thinkyhead/rc_fix_makrpanel
...
Fix MAKRPANEL assignments
2017-03-03 21:40:49 -06:00
Scott Lahteine
1ef6ccd919
Merge pull request #5951 from thinkyhead/rc_print_2d_array
...
Reduce code size (40b, or 166b with bilinear subdivision)
2017-03-03 21:27:44 -06:00
Scott Lahteine
53f5086905
Fix MAKRPANEL assignments
...
MAKRPANEL is a DOGLCD+ULTRA_LCD+NEWPANEL so customize its pins within
that block.
2017-03-03 21:22:21 -06:00
Scott Lahteine
98c7b682ca
General cleanup, const usage, var naming
2017-03-03 20:57:49 -06:00
jes
369bfc8a1e
Reduce code size (40b, or 166b with bilinear subdivision)
2017-03-03 20:36:32 -06:00
Scott Lahteine
0d13412105
Fix "Heating..." message
2017-03-03 12:12:51 -06:00
Scott Lahteine
5065636023
Merge pull request #5934 from thinkyhead/rc_advance_ed_ratio
...
LIN_ADVANCE: Fixed E/D ratio option
2017-03-03 03:24:41 -06:00
divendres
75ad82baab
Update Catalan language
2017-03-02 20:40:06 -06:00
Scott Lahteine
34253497d4
Babysteps code tweak
...
As suggested by https://github.com/MarlinFirmware/Marlin/pull/5887#issuecomment-283832163
2017-03-02 20:35:45 -06:00
Scott Lahteine
fb4aead2b1
Clean up and finish #5887
2017-03-02 20:16:29 -06:00
Scott Lahteine
b3e2bd6f29
Reduce E_D_ratio code
2017-03-02 01:00:37 -06:00
Sebastianv650
de6c40ed8f
Add option to fix E/D ratio
...
Work around for slicers producing buggy gcode.
2017-03-02 01:00:37 -06:00
Scott Lahteine
eeb490221f
Remove BEEPER_PIN override in pins_RIGIDBOARD.h
...
Resolves #5926 . This override is no longer needed since the RAMPS LCD controller pins were fixed.
2017-03-01 18:26:29 -06:00
Roxy-3D
11e892bd84
Merge pull request #5887 from Roxy-3D/RCBugFix
...
Double Click of Encoder Wheel Jumps to Z-BabyStepping
2017-03-01 17:15:02 -07:00
Scott Lahteine
cbeff12f8a
Merge pull request #5933 from teemuatlut/lcd_days_hours
...
Fix formatting of SD print time hours above one day
2017-03-01 15:44:10 -06:00
Scott Lahteine
8a4e9d08a3
Merge pull request #5931 from thinkyhead/rc_core_endstop_fix
...
Fix CoreYX / YZ / ZX endstop logic
2017-03-01 15:32:11 -06:00
teemuatlut
9175d16660
Fix formatting of print time hours above one day
2017-03-01 18:55:25 +02:00
Scott Lahteine
b6d9eb229f
Extend Core endstop commentary
2017-03-01 10:01:50 -06:00
Bob-the-Kuhn
c5e08e8761
CoreYX/YZ/ZX needs different endstop logic than CoreXY/YZ/XZ
...
In the endstop testing section, add the "reverse" logic in addition to "normal" core handling.
In CoreXY/YZ/XZ steppers rotating the same direction gives X movement. Opposing directions produces Y movement.
In CoreYX/ZY/ZX this is reversed. Same = Y, Opposite = X.
----
Fixes the issue where the Y endstop was being checked when moving in the X direction, etc.
2017-03-01 09:40:24 -06:00
Scott Lahteine
c759c26cca
Make LCD_TIMEOUT_TO_STATUS configurable
...
As suggested in
https://github.com/MarlinFirmware/Marlin/issues/5570#issuecomment-283059
065
2017-02-28 19:02:50 -06:00
Michael Henke
47729918fc
enable ENSURE_SMOOTH_MOVES
2017-02-27 20:42:49 -08:00
Michael Henke
330b981912
created Configuration.h and Configuration_adv.h for the kossel mini sold by flsun
2017-02-25 21:31:37 -08:00
Colin Gilgenbach
48b7e0f8d8
Nozzle Wipe Vertical Zig-Zag
...
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
2017-02-25 21:52:43 -06:00
Scott Lahteine
f17b81b765
Add MAPPER_C2C3 to French language
2017-02-25 18:49:00 -06:00
Roxy-3D
7e607b06eb
Better comments on DOUBLE_CLICK_TIME_WINDOW
2017-02-23 13:13:57 -07:00
Scott Lahteine
34cba42104
Use PSTR for MSG_HEATING
2017-02-22 11:30:19 -06:00
Roxy-3D
584d147a02
fixup the indentation
2017-02-22 07:23:54 -07:00
Roxy-3D
e443e0e2a9
Fix scoping issues for double click to Z-Babystepping
2017-02-21 18:15:28 -07:00
Roxy-3D
17d1cd7c09
Double Click of Encoder Wheel Jumps to Z-BabyStepping
2017-02-21 18:08:19 -07:00
Roxy-3D
48d862377a
Double Click of Encoder Wheel Jumps to Z-BabyStepping
2017-02-21 18:04:31 -07:00
Scott Lahteine
cfdc189796
Merge pull request #5856 from thinkyhead/rc_fix_bad_comment
...
Remove non-applicable comment on MANUAL_Z_HOME_POS
2017-02-20 17:54:30 -06:00
dot-bob
cd68380ce6
Add status_printf to print messages to the lcd status line.
...
Also add a hotend indicator to the heating message displayed on the lcd status line.
2017-02-20 15:26:54 -06:00
Scott Lahteine
012aff6823
Merge pull request #5862 from thinkyhead/rc_fix_a_thing
...
Finish reducing of ABL_BILINEAR_SUBDIVISION
2017-02-18 21:36:28 -06:00
Scott Lahteine
b9187020c4
Finish reducing of ABL_BILINEAR_SUBDIVISION
2017-02-18 20:01:19 -06:00
Scott Lahteine
e282b72151
Remove non-applicable comment on MANUAL_Z_HOME_POS
2017-02-18 05:14:43 -06:00
Scott Lahteine
57f92a4632
Apply DISTINCT_E_FACTORS to sync_from_steppers
...
Followup to #5840
2017-02-18 04:36:41 -06:00
Scott Lahteine
4da8b1494b
Merge pull request #5854 from thinkyhead/rc_fixup_m600
...
M600 cleanup and bugfix
2017-02-18 04:27:13 -06:00
Scott Lahteine
dd02dba6e6
Merge pull request #5840 from MagoKimbra/rc_fix_lin_advanced_step_to_mm
...
Fix steps_to_mm for active extruders
2017-02-18 04:25:53 -06:00
Scott Lahteine
6e0b3fcc08
Optimize M600 heater status LCD items
2017-02-18 04:08:00 -06:00
Scott Lahteine
44b4e116bd
Commentary / style in gcode_M600
2017-02-18 04:08:00 -06:00
Scott Lahteine
561904345f
Tweak config ordering for M600
2017-02-18 00:01:31 -06:00
Scott Lahteine
284d6de9da
Remove some old code comments
2017-02-17 15:25:56 -06:00
MagoKimbra
3685224c1a
Fix steps_to_mm for active extruders
2017-02-15 21:45:39 +01:00
Scott Lahteine
4578c573fe
Pause the print job timer while in M600
2017-02-15 05:29:34 -06:00
Scott Lahteine
bfe6f71794
Simplify filament_change_beep function
2017-02-15 05:29:34 -06:00
Scott Lahteine
8289ea1316
Use a short name for the filament "endstop"
2017-02-15 05:29:34 -06:00
Scott Lahteine
d9dcef8a87
Spacing, coding standards
2017-02-15 05:29:34 -06:00
Scott Lahteine
931914e679
Apply M600 updates to all configs
2017-02-15 05:29:34 -06:00
Roxy-3D
8bf0b496b9
Improve M600 with timeout, wait for heatup.
2017-02-15 05:29:34 -06:00
Tannoo
c40fe2113c
Fix for broken MBL
...
LCD call was waiting forever, causing the system to hang.
2017-02-15 04:39:22 -06:00
Scott Lahteine
4d4745c0eb
Parenthesize some menu defines for safety
2017-02-14 23:12:27 -06:00
Scott Lahteine
47f9883b0f
Dynamic allocation for SDCARD_SORT_ALPHA
2017-02-14 21:37:25 -06:00
Scott Lahteine
a561bd5e3a
New feature: SDCARD_SORT_ALPHA
2017-02-14 21:37:24 -06:00
Scott Lahteine
c04d6b5aa6
Merge pull request #5829 from thinkyhead/rc_fix_isr_reentry
...
Combine fixes for LIN_ADVANCE and temperature ISR
2017-02-14 20:36:58 -06:00
Scott Lahteine
467f01435f
Merge pull request #5816 from thinkyhead/rc_abl_virt_reduce
...
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
2017-02-14 08:41:44 -06:00
Scott Lahteine
97b6fb6381
Reduce / optimize LIN_ADVANCE code
2017-02-14 07:52:03 -06:00
Sebastianv650
271ced7341
Prevent re-entering of temperature ISR
...
If Marlin is inside the temperature ISR, the stepper ISR is enabled. If
a stepper event is now happening Marlin will proceed with the stepper
ISR. Now, at the end of the stepper ISR, the temperatre ISR gets enabled
again. While Marlin proceed the rest of the temperature ISR, it's now
vulnerable to a second ISR call.
2017-02-14 07:52:03 -06:00
Sebastianv650
1b59766fcb
Cleanup position_float
...
Hopefully fixes Marlin #5481
2017-02-12 13:09:06 +01:00
Scott Lahteine
a950c31e2d
Merge pull request #5815 from thinkyhead/rc_pulses_per_step
...
Give encoder pulse/steps conditionals their own block
2017-02-12 04:14:00 -06:00
Scott Lahteine
7176de8605
Merge pull request #5814 from thinkyhead/hotend_loop_always
...
Make HOTEND_LOOP more consistent, let compiler optimize it
2017-02-12 04:13:14 -06:00
Scott Lahteine
adec219ca5
Merge pull request #5811 from thinkyhead/fix_two_strings
...
No space after X: or A: in M114 output
2017-02-12 04:11:51 -06:00
jes
eaa829b58c
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
2017-02-12 04:09:48 -06:00
Scott Lahteine
1c99ca82d8
Give encoder pulse/steps conditionals their own block
2017-02-12 03:57:57 -06:00
Scott Lahteine
e44294bb4d
Make HOTEND_LOOP more consistent, let compiler optimize it
2017-02-12 02:50:38 -06:00
Scott Lahteine
701f4a6d9d
Merge pull request #5729 from Bob-the-Kuhn/guaranteed-BLTouch-detection
...
guaranteed BLTouch detection
2017-02-12 01:13:35 -06:00
Scott Lahteine
c15b9a6a06
No space after X: or A: in M114 output
2017-02-12 00:10:03 -06:00
Scott Lahteine
e1702816f6
Fix SD_CHECK_AND_RETRY condition
...
Addressing #5806
2017-02-11 23:55:56 -06:00
Scott Lahteine
1bc5be3bdf
Cast DELTA_PRINTABLE_RADIUS to float in sq()
...
Addressing #5625
2017-02-11 23:28:39 -06:00
Bob-the-Kuhn
0369f97ec1
guaranteed BLTouch detection
...
To guarantee that the 5mS pulse from a BLTouch is recognized you need to
have the endstops.update() routine run twice in that 5mS period.
At 200 steps per mm, my system has problems below a feedrate of 120 mm
per minute.
Two things were done to guarantee the two updates within 5mS:
1) In interrupt mode, a check was added to the temperature ISR. If the
endstop interrupt flag/counter is active then it'll kick off the endstop
update routine every 1mS until the flag/counter is zero. This
flag/counter is decremented by the temperature ISR AND by the stepper
ISR.
2) In poling mode, code was added to the stepper ISR that will make sure
the ISR runs about every 1.5mS. The "extra" ISR runs only check the
endstops. This was done by grabbing the intended ISR delay and, if it's
over 2.0mS, splitting the intended delay into multiple smaller delays.
The first delay can be up to 2.0mS, the next ones 1.5mS (as needed) and
the last no less than 0.5mS.
=========================================
BLTouch error state recovery
If BLTouch already active when deploying the probe then try to reset it
& clear the probe.
If that doesn't fix it then declare an error.
Also added BLTouch init routine to startup section
2017-02-11 12:01:34 -06:00
Scott Lahteine
1e4d4e5915
Fix typo in language_uk
...
Thanks to @pavlus for this one
2017-02-10 15:34:31 -06:00
Scott Lahteine
7fe7a0c8be
Merge pull request #5793 from thinkyhead/rc_adjust_probe_output
...
Adjust probe_pt() terminal output to respect probe z-offset
2017-02-09 23:05:02 -06:00
Scott Lahteine
633c253bc1
Merge pull request #5792 from thinkyhead/rc_default_dac_vals
...
Default DAC values for RigidBoard V2
2017-02-09 22:56:03 -06:00
Florian Heilmann
7bbc31704c
Adjust probe_pt() terminal output to respect probe z-offset
2017-02-09 22:54:22 -06:00
Scott Lahteine
a245656db3
Merge pull request #5713 from gege2b/RCBF-French
...
French translation : Added missing strings as well as missing accents
2017-02-09 22:43:56 -06:00
jaysonkelly
713931338a
Default DAC values for RigidBoard V2
2017-02-09 22:39:00 -06:00
Bob-the-Kuhn
ae706233a8
pinsDebug for 644/1284 & USB646/1286 families
...
added conditional compilation for PWMs 1C & 3C
add Teensyduino compatibility
==========================================
changes per review - minor formatting changes
1) remove non-printable character at the end of line 687
2) split a really long comment into two lines
3) got rid of some trailing spaces
============================================
Made pinsDebug_Teensyduino.h the same between this PR and PR 5668 which
is for a re-written pinsDebug.h file.
The changes were:
1) added copyright @ GNU license header
2) a blank line crept in.
2017-02-09 07:24:02 -06:00
Gege2B
22dfcc9a71
French translation : Added missing strings as well as missing accents
2017-01-17 23:29:23 +01:00
Scott Lahteine
9b5515926a
Merge pull request #5696 from thinkyhead/rc_volumetric_default
...
Allow enabling volumetric filament on config load
2017-01-14 05:48:51 -08:00
Robert Kirk
0d147ead66
Allow enabling volumetric filament on config load
2017-01-14 04:37:49 -08:00
AnHardt
fa26767efe
Replace all remaining 'boolean' with 'bool'
2017-01-13 13:03:52 +01:00
AnHardt
f6858d9974
Fix M110 without leading N
...
Store N in the right variable.
This is too rarely used.
"mea culpa, mea culpa, mea maxima culpa"
2017-01-13 12:33:50 +01:00
Scott Lahteine
0c0c840ba8
Merge pull request #5683 from emartinez167/EMartinez-Changes
...
Updates to some incorrectly ended strings in the Spanish translation
2017-01-12 07:49:15 -08:00
Kai
25dae3bccc
Update language_de.h
...
Small corrections
2017-01-12 16:06:58 +01:00
emartinez167
7292145f4e
Fix for some wrong strings
...
On last commit, some strings were ended with the incorrect character.
This fixes it.
2017-01-12 22:35:04 +08:00
Scott Lahteine
93a9aa6b76
Merge pull request #5682 from thinkyhead/rc_spanish_jan
...
Updates to Spanish language
2017-01-12 06:14:10 -08:00
Scott Lahteine
7a9c1a279b
Merge pull request #5681 from thinkyhead/rc_prevent_boot_loop
...
Reset watchdog in SD init to prevent reboot
2017-01-12 06:13:56 -08:00
Scott Lahteine
e409c7f9e8
Merge pull request #5645 from esenapaj/From-microseconds-to-milliseconds
...
From "microseconds" to "milliseconds"
2017-01-12 06:02:55 -08:00
emartinez167
020c6af7b0
Updates to Spanish language
...
Add missing Spanish language definitions.
2017-01-12 05:53:39 -08:00
Hans Raaf
d29cc8f7bc
Reset watchdog in SD init to prevent reboot
...
If the watchdog is enabled and bootscreen + SD card checks take too long, Marlin may hang at boot time because of the reset loop. We have this happen all the time with the Anet board if no SD card is inserted.
2017-01-12 05:33:38 -08:00
Scott Lahteine
7743849608
Merge pull request #5680 from thinkyhead/rc_configs_puhlease
...
code_value_float tweak
2017-01-12 05:22:47 -08:00
Scott Lahteine
16357fbfdf
Merge pull request #5619 from Ocarthon/RCBugFix
...
Disable SD Detect for K8400
2017-01-12 05:22:03 -08:00
Scott Lahteine
e57c0fce66
Move MOSFET changes above #include for RIGIDBOARD
...
Correction to #5629
2017-01-12 04:46:49 -08:00
Scott Lahteine
c376f6a2cb
code_value_float tweak
2017-01-12 04:38:09 -08:00
Scott Lahteine
fb3c30e24c
Fix lcd_wait_for_homing causing menu to block
...
As a showcase function for how to do waiting in the lcd menu, this function should be preserved.
2017-01-12 04:37:23 -08:00
Scott Lahteine
f8ae0fd29f
Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix
...
Fix empty Prepare menu
2017-01-12 04:20:18 -08:00
Robert Kirk
aab5118c6a
Remove error causing break command
...
Use index macro instead of e
2017-01-01 17:47:01 -05:00
esenapaj
d38e335272
From "microseconds" to "milliseconds"
...
delay() is milliseconds
2017-01-02 01:19:33 +09:00
Philip Standt
8ae2bc7e2e
Disable SD Detect for K8400
2016-12-28 23:21:18 +01:00
Scott Lahteine
4061fca1ad
Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT
2016-12-23 19:55:12 -08:00
Scott Lahteine
5ab7b91615
Comment on filament runout sensor config
2016-12-23 19:50:27 -08:00
Scott Lahteine
922c67f17d
Merge pull request #5588 from thinkyhead/rc_remove_biv25
...
Drop biv2.5 delta configurations
2016-12-23 19:14:50 -08:00
Scott Lahteine
8c6c048551
drop biv2.5 delta configurations
2016-12-23 18:56:07 -08:00
Scott Lahteine
92dbeebf40
Define ADV_NEVER, ADV_RATE
2016-12-23 18:43:23 -08:00
Robert Kirk
306c184b1a
Allow M600 when dryrun debugging
2016-12-21 20:30:51 -05:00
Scott Lahteine
fe2ea2906f
Merge pull request #5573 from thinkyhead/rc_unify_stepper_isr
...
LIN_ADVANCE with unified stepper ISR
2016-12-21 02:53:32 -08:00
Sebastianv650
84c685f8b5
First draft of Unified Stepper / E Advance ISR
2016-12-21 01:34:39 -08:00
Scott Lahteine
83021d82c6
Merge pull request #5502 from AnHardt/symbol-strings
...
Add symbol-strings
2016-12-21 00:51:59 -08:00
Scott Lahteine
036eccfd6e
Merge pull request #5572 from Kaibob2/patch-5
...
Update language_de.h
2016-12-21 00:50:40 -08:00
Scott Lahteine
b794b76836
Merge pull request #5567 from AnHardt/fix5194
...
Fix 5194
2016-12-21 00:49:52 -08:00
Scott Lahteine
451ba5df01
Merge pull request #5516 from esenapaj/Suppress-warning
...
Suppress warning
2016-12-21 00:00:35 -08:00
Scott Lahteine
92dbc63949
Merge pull request #5571 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-12-20 23:59:55 -08:00
Kai
ade72535c4
Update language_de.h
...
Added tarnslation for
```
#define MSG_DEBUG_MENU
#define MSG_PROGRESS_BAR_TEST
```
2016-12-21 08:57:39 +01:00
esenapaj
ab6b005867
Suppress warning
2016-12-21 09:13:03 +09:00
AnHardt
61f15ef7e7
Fix 5194
...
I have been a bit too radical in cleaning up this section.
2016-12-21 00:45:29 +01:00
esenapaj
60515ff700
Update Japanese translation
...
・Add new translation
2016-12-21 08:44:07 +09:00
Scott Lahteine
1e419655f3
Followup to #5550 - spacing before "mm"
2016-12-20 02:27:54 -08:00
Scott Lahteine
1a26ce1cdc
Merge pull request #5550 from FHeilmann/patch-2
...
Allow negative retract values in the LCD
2016-12-20 02:10:22 -08:00
Scott Lahteine
bec30c89e7
Merge pull request #5522 from esenapaj/Add-description-for-dual-x
...
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
2016-12-20 01:31:53 -08:00
Scott Lahteine
7739c0affa
Change "+mm" to "mm" in most languages
...
- Japanese and Chinese still need update
2016-12-20 01:16:51 -08:00
Scott Lahteine
1cba425308
Allow negative recover-swap length from LCD
2016-12-20 01:16:08 -08:00
Scott Lahteine
298a8c6a3c
Merge pull request #5561 from thinkyhead/rc_no_case_light
...
Support for M335 case light "no case light"
2016-12-20 01:06:59 -08:00
Scott Lahteine
644f45cbd8
Merge pull request #5563 from akaJes/m600
...
FILAMENT_CHANGE_FEATURE allowed in idle mode
2016-12-20 01:06:10 -08:00
Scott Lahteine
0d2fc13516
Place "Level Bed" closer to "Auto Home"
2016-12-20 00:51:03 -08:00
Scott Lahteine
b031d28ebf
Encoder events should not skip stripes
2016-12-20 00:21:51 -08:00
Scott Lahteine
22881f38b9
Fix updating of "bool" menu items
2016-12-20 00:21:51 -08:00
Scott Lahteine
eb68715b94
No "Cooldown" menu if heaters are off
2016-12-20 00:21:51 -08:00
Jesus
4ed976b5ff
m600 fixes
2016-12-20 09:47:46 +02:00
Damien
4e2639942b
Support for M335 case light "no case light"
2016-12-19 23:23:08 -08:00
Scott Lahteine
18ba31e9b5
Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example
2016-12-19 22:57:14 -08:00
Scott Lahteine
03af5961b0
Hide (or remove) custom character change on boot screen
2016-12-19 22:27:28 -08:00
Scott Lahteine
1642f5ed31
Add macro to some en strings
2016-12-19 22:27:28 -08:00
Scott Lahteine
dbb2d56c89
Correct comment on watchdog timer
2016-12-19 22:27:28 -08:00
Scott Lahteine
41a30923f3
Merge pull request #5559 from thinkyhead/rc_minimum_gcc_version
...
Throw an error for gcc before 4.7
2016-12-19 19:50:44 -08:00
Scott Lahteine
6d6a1db6ec
Apply const to _EEPROM_writeData value param
2016-12-19 18:50:43 -08:00
Robert Kirk
f724ef5820
Have bed leveling status output current status, not requested.
2016-12-19 18:47:45 -08:00
Scott Lahteine
20218e553d
Merge pull request #5527 from MagoKimbra/rc_configuration_store_fix_size
...
Fix size
2016-12-19 18:47:28 -08:00
Scott Lahteine
dcfbe2bd3c
Throw an error for gcc before 4.7
2016-12-19 18:30:51 -08:00
Scott Lahteine
82fde7df2e
Merge pull request #5512 from AnHardt/speed-compare-bbr
...
Optimize handling of block_buffer_runtime()
2016-12-19 18:21:06 -08:00
Scott Lahteine
8986225752
Spacing, cleanup in speed_lookuptable.h
2016-12-19 14:52:45 -08:00
Scott Lahteine
e12c8e5cac
Split up thermistor tables
2016-12-19 14:47:54 -08:00
Florian Heilmann
a7334fd2a0
Allow negative retract values in the LCD
...
This can already be done via G-Code, so adding the capability to the LCD should be straight forward.
2016-12-19 14:19:06 +01:00
AnHardt
292eb365c6
Optimize handling of block_buffer_runtime()
...
millis_t is long - divisions take for ever.
Return a kind of millisecond instead of microsecond -
divided by 1024 instead of 1000 for speed. (2.4% error)
That does not matter because block_buffer_runtime is
already a too short estimation.
Shrink the return-type.
2016-12-19 11:47:28 +01:00
esenapaj
6854f44bf2
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
2016-12-19 02:21:10 +09:00
Scott Lahteine
3f6f036f7c
Merge pull request #5524 from thinkyhead/rc_optional_dogm_splitup
...
Report EEPROM data size, not final index
2016-12-16 18:55:48 -08:00
MagoKimbra
86ba7e4542
Fix size
...
Fix size for writeData and readData.
For bilinear grid 11 x 11 for example, size is 4 (float) x 11 x 11 = 484. uint8_t max is 255.
2016-12-16 14:49:33 +01:00
Scott Lahteine
f9f75c8016
Fix USE_RAW_KINEMATICS in prepare_kinematic_move_to
2016-12-15 23:15:38 -08:00
Scott Lahteine
87921f390a
Clarify what are "logical" positions in the planner
2016-12-15 23:15:38 -08:00
Scott Lahteine
a4f10f59c3
Write the E parameter length correctly
2016-12-15 23:15:38 -08:00
Scott Lahteine
2e904cb4f9
Merge pull request #5514 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-12-15 21:38:40 -08:00
Scott Lahteine
0b6817e0f9
Merge pull request #5505 from android444/patch-4
...
Update for translations language_pl.h
2016-12-15 21:38:18 -08:00
Scott Lahteine
3bd76f60e4
Report EEPROM data size, not final index
2016-12-15 20:26:28 -08:00
Scott Lahteine
78d6d6e076
Merge pull request #5452 from thinkyhead/rc_save_your_mesh
...
Save Bed Leveling to EEPROM
2016-12-15 20:23:01 -08:00
Scott Lahteine
0d0aa6c20d
Patch type for max_acceleration_mm_per_s2 save/restore
2016-12-15 20:05:42 -08:00
Scott Lahteine
d4f5418802
Merge pull request #5517 from esenapaj/Fix-for-PR-#5255
...
Fix for the PR #5255 (Case light menu (3rd attempt))
2016-12-15 20:01:22 -08:00
Scott Lahteine
fa7010b0a1
Merge pull request #5515 from esenapaj/Remove-unnecessary-tabs-and-spaces
...
Remove unnecessary tabs and spaces
2016-12-15 19:58:32 -08:00
Scott Lahteine
6d7b1cdf6c
Add M421 for ABL Bilinear
2016-12-15 19:39:11 -08:00
Scott Lahteine
32e65dc429
Extend M420 to print state and, with V, the matrix / mesh
2016-12-15 19:39:11 -08:00
Scott Lahteine
d04258753b
Don't throw away the bed level matrix on G28
2016-12-15 19:21:18 -08:00
Scott Lahteine
8f0f225d10
Save ABL Planar Matrix to EEPROM
2016-12-15 19:21:15 -08:00
Scott Lahteine
e2429a9da1
Generalize Bed Leveling flag in EEPROM
2016-12-15 19:20:52 -08:00
Scott Lahteine
e42fd7813a
Save ABL Bilinear Grid to EEPROM
2016-12-15 19:20:48 -08:00
Scott Lahteine
492b68f8e3
Better EEPROM read/write error handling
2016-12-15 19:08:44 -08:00
Scott Lahteine
55722c09da
Use "UNPROBED" for un-probed bed_level_grid points
2016-12-15 19:08:44 -08:00
Scott Lahteine
2643404ac8
Throw an error in M420 if can't enable
2016-12-15 19:08:43 -08:00
Scott Lahteine
b1539394fd
Use planner.unapply_leveling to undo tilt in G29
2016-12-15 19:08:43 -08:00
Scott Lahteine
04636f78eb
Re-enable MBL/ABL after M48
2016-12-15 19:08:43 -08:00
Scott Lahteine
9b41638672
Minor tweak to G29 grid points
2016-12-15 19:08:42 -08:00
Scott Lahteine
daa2cad21f
Fix comment on G29 to include 'Z'
2016-12-15 19:08:42 -08:00
Scott Lahteine
8244fefcc2
Tweak call to reset_bed_level in G29
2016-12-15 19:08:42 -08:00
Scott Lahteine
0995a5d734
Fixup reset_bed_level
2016-12-15 19:08:42 -08:00
Scott Lahteine
1b2fb2bdc7
ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_*
2016-12-15 19:08:41 -08:00
esenapaj
d486361c69
Fix for commented section of Config_RetrieveSettings()
2016-12-16 04:34:47 +09:00
esenapaj
88157ba529
Fix for the PR #5255 (Case light menu (3rd attempt))
2016-12-16 00:57:32 +09:00
esenapaj
069c6b38dd
Remove unnecessary tabs and spaces
2016-12-16 00:21:32 +09:00
esenapaj
9c8116aedf
Update Japanese translation
...
・Add new translation
2016-12-16 00:06:58 +09:00
AnHardt
57b1275cde
Add symbol-string to _de
...
Add symbol-string for _de
to reduce the frquencey of regenerating 'mappers' and 'fonts'
with the new utf-system.
2016-12-15 14:37:18 +01:00
android444
3363d2c937
Update for translations language_pl.h
2016-12-14 17:32:33 +01:00
Scott Lahteine
06af3b62ba
Move HOLLOW_FRAME options to config_adv
2016-12-14 04:31:27 -08:00
Scott Lahteine
67ca6c7bfe
Codestyle tweaks to ultralcd.cpp
2016-12-14 04:20:33 -08:00
Scott Lahteine
8d9fcd8e6f
Merge pull request #5495 from AnHardt/autoadjusting_display-updates
...
Adaptive screen updates for all kinds of displays
2016-12-14 04:16:26 -08:00
Scott Lahteine
77a360912d
Merge pull request #5491 from yhfudev/devel-rcbugfix-language-headers
...
UTF-8 language header files
2016-12-14 02:23:09 -08:00
AnHardt
d0e24e0876
Adaptive screen updates for all kinds of displays
...
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.
For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.
When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.
When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
2016-12-13 18:44:34 +01:00
yhfudev
2dbd38ce16
tag the utf-8 strings
2016-12-13 11:54:35 -05:00
Scott Lahteine
94ffb58da7
Prevent retract un-hop at wrong height
2016-12-13 08:24:12 -08:00
Scott Lahteine
0772c8e55f
Merge pull request #5487 from thinkyhead/rc_easier_move_axis
...
Rearrange Move Menu, Fix up Delta Calibration
2016-12-13 07:07:05 -08:00
Scott Lahteine
b2c8de856b
Merge pull request #5478 from AnHardt/stepspermm
...
Replace ftostr62sign with ftostr62rj
2016-12-13 07:05:42 -08:00
Scott Lahteine
1fd8185d37
Merge pull request #5492 from thinkyhead/rc_fix_language_es
...
Fix multiple definitions of message macros in the language-es.h
2016-12-13 06:57:52 -08:00
yhfudev
1cdffdede7
fix multiple definitions of message macros in the language-es.h
2016-12-13 06:48:38 -08:00
Scott Lahteine
b67f8cb499
Merge pull request #5490 from jbrazio/update-bqhp2
...
Update the bq Hephestos 2 example configuration
2016-12-13 05:04:24 -08:00
Scott Lahteine
93b2833347
Move Menu: Select axis first, resolution after
2016-12-13 03:11:14 -08:00
Scott Lahteine
48aa0f6475
Merge pull request #5475 from AnHardt/utf-mapper-tr
...
utf8-mapper for Turkish
2016-12-13 03:03:22 -08:00
Scott Lahteine
b9ee0d7bd3
Merge pull request #5488 from thinkyhead/rc_fade_compiler_warn
...
Patch fade_factor compiler warning
2016-12-13 03:00:47 -08:00
Scott Lahteine
641e0936d4
Patch up Delta Calibration Menu
2016-12-13 02:42:28 -08:00
Scott Lahteine
b4dbf4d18a
Non-reentrant "Moving..." screen to safely wait in LCD
2016-12-13 02:42:27 -08:00
Scott Lahteine
7b625e0048
Patch fade_factor compiler warning
2016-12-13 02:29:01 -08:00
Scott Lahteine
6fa8fd15e2
Add negative temperatures for Thermistor 1
...
Changes from #5485 by @AndKe
2016-12-13 02:06:16 -08:00
Scott Lahteine
2b5d424394
Use handle_reprapworld_keypad for keypad handling
2016-12-13 01:41:08 -08:00
Scott Lahteine
887ed73c9b
Expose delta_clip_start_height for use by others
2016-12-13 01:41:08 -08:00
João Brázio
3f75edb1d6
Updated bq Hephestos 2 example configuration
2016-12-13 09:26:07 +00:00
Daniel Martinez
b796e7031d
Update Aragonese translation
2016-12-12 17:36:33 -08:00
AnHardt
cd2b74e88d
Replace ftostr62sign with ftostr62rj
...
`ftostr62sign()` is used only when displaing/editing
Steps/mm. A sign is not needed - the value is always positive.
Because the number part is long there is no't much place for the values name.
With this PR the is one more char for the name possible.
2016-12-12 20:25:20 +01:00
AnHardt
795541f87e
utf8-mapper for Turkish
...
The non utf8 version of turkish is a bit unhandy.
Delete `language_tr.h`
Rename `language_tr_utf.h` to `language_tr.h`
Provide a propper utf8-mapper for Turkish and use it.
2016-12-12 15:56:59 +01:00
Scott Lahteine
7c71bb2900
Merge pull request #5471 from thinkyhead/rc_planner_report_m503
...
Patch to show E factors in M503
2016-12-11 17:47:41 -08:00
Scott Lahteine
39401b7472
Patch to show E factors in M503
2016-12-11 17:37:29 -08:00
Scott Lahteine
6b50230022
Merge pull request #5447 from thinkyhead/rc_update_dutch
...
Dutch cleanup, ordering, placeholders
2016-12-10 22:13:20 -08:00
Scott Lahteine
2c97c11731
Merge pull request #5454 from thinkyhead/rc_fix_delta_g29
...
Fix G29 starting height on DELTA
2016-12-10 22:10:33 -08:00
Scott Lahteine
8239c45b30
Merge pull request #5448 from thinkyhead/rc_eeprom_bump
...
EEPROM: Prolong life. Better support for `DISTINCT_E_FACTORS`.
2016-12-10 22:06:00 -08:00
Scott Lahteine
21ed43df5f
New Dutch terms
2016-12-10 21:59:45 -08:00
Scott Lahteine
4bc6536f54
Move to safe zone on DELTA if using do_blocking_move_to*
2016-12-10 21:28:24 -08:00
Scott Lahteine
6f389158d7
Compile less code with EEPROM off
2016-12-09 06:05:32 -08:00
Scott Lahteine
f2301a2a04
Add e-stepper count to EEPROM (for planner vars)
2016-12-09 06:05:31 -08:00
Scott Lahteine
53c9fca0f6
Only write to EEPROM when a byte changes
2016-12-09 06:05:31 -08:00
AnHardt
13eebd11cf
volatile_block_buffer_runtime_us
...
`block_buffer_runtime_us` is mangled in the planner and in the stepper-ISR.
So it needs to be volatile and interrupt protected.
2016-12-09 14:49:02 +01:00
Scott Lahteine
8383f35b40
Merge pull request #5445 from thinkyhead/rc_reduce_jerk_code
...
Slightly shrink jerk and advance code
2016-12-09 02:54:03 -08:00
Gege2B
40453c1b9a
Update french translation (LIGHTS str)
2016-12-09 11:18:29 +01:00
Scott Lahteine
fc2fc828b3
Prettify LIN_ADVANCE code with the positive condition
2016-12-09 00:29:07 -08:00
Scott Lahteine
1929502e15
Add const to some variables
2016-12-09 00:29:06 -08:00
Scott Lahteine
2da4d22520
Pretty up ADVANCE code
2016-12-08 22:51:28 -08:00
Scott Lahteine
af024e1d7c
Pretty up coast / reverse jerk code
2016-12-08 22:50:25 -08:00
Scott Lahteine
3f3b5c86d8
Slightly shrink code for jerk-based reduction of safe_speed
2016-12-08 22:24:29 -08:00
AnHardt
87fe20b5f5
Simplify long_move()
...
We are not really interested in, if there are blocks.
All information we need is in `block_buffer_runtime_us`.
2016-12-09 00:13:35 +01:00
Scott Lahteine
574d9c7d3d
Merge pull request #5432 from Kaibob2/patch-2
...
Update language_de.h
2016-12-08 13:14:04 -08:00
Scott Lahteine
f089279263
Merge pull request #5431 from esenapaj/Suppress-warnings,-etc
...
Suppress warnings, etc
2016-12-08 13:10:12 -08:00
Scott Lahteine
d92ccb230c
Merge pull request #5438 from AnHardt/patch-long_move
...
Patch long_move()
2016-12-08 13:08:36 -08:00
AnHardt
706b240251
Patch long_move()
...
While the last move in the planner_buffer is running
it's duration is already subtracted from block_buffer_runtime_us.
2016-12-08 21:03:26 +01:00
esenapaj
a298a58684
Remove redundant "E"
2016-12-09 02:27:34 +09:00
Kai
390a6d976a
Update language_de.h
...
#define MSG_ENDSTOP_ABORT doesn't fit in Display
See https://github.com/MarlinFirmware/Marlin/issues/5401#issuecomment-265714487
2016-12-08 12:18:19 +01:00
esenapaj
e9393c3634
Suppress warnings, etc
...
・Suppress warnings
・Remove unused variable "did_update"
2016-12-08 17:47:59 +09:00
Scott Lahteine
da6a094424
Sanity-check inverting and pullups for Z probe and Z endstop
...
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
2016-12-08 00:12:19 -08:00
Scott Lahteine
3fb43c11fc
Fix compile error with LCD_I2C_VIKI
2016-12-07 23:29:45 -06:00
Scott Lahteine
aa241c63b3
Include M205 note in configurations
2016-12-07 14:45:44 -06:00
Scott Lahteine
c8a95ec514
Merge pull request #5413 from MagoKimbra/rc_fix_mesh
...
Fix Mesh without Fade Height
2016-12-07 03:16:02 -06:00
Scott Lahteine
35ad9626f1
Merge pull request #5410 from thinkyhead/rc_polish_update
...
Update Polish language, reduce filament change messages
2016-12-07 03:15:53 -06:00
Scott Lahteine
01e5d46ea7
Patch some planner compile errors
2016-12-07 02:26:24 -06:00
MagoKimbra
5383212a28
Fix Mesh without Fade Height
2016-12-07 09:23:42 +01:00
Scott Lahteine
dbe1dc1452
Merge pull request #5406 from Rigid3D/RCBugFix
...
Turkish Translation Update
2016-12-07 00:56:08 -06:00
Scott Lahteine
4783a59249
Remove filament-change empty lines from languages
2016-12-07 00:53:03 -06:00
Scott Lahteine
1705099c3e
Save space by not defining unused filament change message lines
2016-12-07 00:53:03 -06:00
android444
9b1f4b514b
Update Polish language
...
Translation of messages in English to Polish.
2016-12-06 22:28:33 -06:00
Robert Marko
84f7e1de04
Updates to Croatian language
2016-12-06 22:24:12 -06:00
esenapaj
08cdaaf19b
README and Version for 1.1.0-RCBugFix
...
Sync with RC8
2016-12-07 10:43:58 +09:00
Mehmet Sutas
f4663cb677
Update language_tr_utf8.h
2016-12-07 00:21:56 +03:00
Mehmet Sutas
b4fd115d4e
Update language_tr.h
2016-12-07 00:20:07 +03:00
Scott Lahteine
83c5026db1
Ignore homing button when SD printing
...
As suggested in #5404 by @android444
2016-12-06 14:22:34 -06:00
Scott Lahteine
312caef472
Merge pull request #5398 from thinkyhead/rc_croatian_cleanup
...
Fix Croatian spacing, extra #endif
2016-12-06 03:22:19 -06:00
Scott Lahteine
46b65773ea
Fix Croatian spacing, extra #endif
2016-12-06 03:10:37 -06:00
Scott Lahteine
3f2faac9d1
Merge pull request #5388 from thinkyhead/rc_subdivide_bilinear
...
Subdivide Bilinear Grid with Catmull Rom Splines
2016-12-05 20:28:50 -06:00
Scott Lahteine
b5b5edd9ad
Merge pull request #5394 from thinkyhead/rc_drop_board_99
...
Remove mystery-board 99
2016-12-05 20:28:35 -06:00
Scott Lahteine
c48901f355
Remove mystery-board 99
2016-12-05 20:16:50 -06:00
akaJes
d7b948610a
Experimental bilinear subdivision option
2016-12-05 20:11:24 -06:00
Scott Lahteine
6253b765aa
Merge pull request #5389 from thinkyhead/distribute_screen_updates
...
Distribute GLCD screen updates in time
2016-12-05 20:08:33 -06:00
Scott Lahteine
b203901143
Merge pull request #5393 from AnHardt/Fix-auto_report_temperatures
...
Fix auto_report_temperatures()
2016-12-05 19:38:23 -06:00
AnHardt
59a27ed27d
Fix auto_report_temperatures()
...
The `auto_report_temperatures` needs a linefeed to be recognized by Repetier Host.
2016-12-06 01:26:44 +01:00
AnHardt
a6fbd4a5d8
Distribute GLCD screen updates in time
...
Currently we draw and send the screens for a graphical LCD all at once.
We draw in two or four parts but draw them directly behind each other.
For the tested status screen this takes 59-62ms in a single block.
During this time nothing else (except the interrupts) can be done.
When printing a sequence of very short moves the buffer drains - sometimes until it's empty.
This PR splits the screen update into parts.
Currently we have 10 time slots. During the first one the complete screen is drawn. (60,0,0,0,0,0,0,0,0,0,0)
Here i introduce pauses for doing other things. (30,30,0,0,0,0,0,0) or (15,15,15,15,0,0,0,0,0,0)
Drawing in consecutive time slots prevents from lagging too much. Even with a 4 stripe display all the drawing is done after 400ms.
Previous experiments with a even better distribution of the time slots like
(30,0,0,0,0,30,0,0,0,0) and (15,0,15,0,15,0,15,0,0,0) did not feel good when using the menu, because of too much lag.
Because of the previous PRs to speed up the display updates and especially reducing the difference between drawing 2 or 4 stripes,
it now makes sense for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER to go from 2 to 4 stripes. This costs about 1-2ms per complete
screen update, but is payed back by having partial updates lasting only the half time and two additional brakes. Also ~256 byte of
framebuffer are saved in RAM.
13:45:59.213 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59
13:46:00.213 : echo: #:16 >:14 s:30; #:17 >:13 s:30; S#:33 S>:27 S:60
13:46:01.215 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59
13:46:02.215 : echo: #:16 >:13 s:29; #:16 >:14 s:30; S#:32 S>:27 S:59
13:46:03.214 : echo: #:17 >:13 s:30; #:17 >:13 s:30; S#:34 S>:26 S:60
13:46:04.214 : echo: #:16 >:13 s:29; #:16 >:14 s:30; S#:32 S>:27 S:59
13:46:05.212 : echo: #:16 >:14 s:30; #:17 >:13 s:30; S#:33 S>:27 S:60
13:46:06.212 : echo: #:17 >:13 s:30; #:16 >:13 s:29; S#:33 S>:26 S:59
03:30:36.779 : echo: #:8 >:7 s:15; #:10 >:7 s:17; #:8 >:6 s:14; #:8 >:7 s:15; S#:34 S>:27 S:61
03:30:37.778 : echo: #:8 >:6 s:14; #:10 >:7 s:17; #:9 >:7 s:16; #:8 >:6 s:14; S#:35 S>:26 S:61
03:30:38.778 : echo: #:8 >:6 s:14; #:11 >:7 s:18; #:8 >:6 s:14; #:8 >:7 s:15; S#:35 S>:26 S:61
03:30:39.777 : echo: #:8 >:6 s:14; #:10 >:7 s:17; #:8 >:8 s:16; #:8 >:6 s:14; S#:34 S>:27 S:61
03:30:40.780 : echo: #:8 >:6 s:14; #:11 >:7 s:18; #:8 >:6 s:14; #:8 >:6 s:14; S#:35 S>:25 S:60
03:30:41.780 : echo: #:9 >:6 s:15; #:10 >:7 s:17; #:8 >:6 s:14; #:9 >:6 s:15; S#:36 S>:25 S:61
03:30:42.779 : echo: #:8 >:6 s:14; #:10 >:8 s:18; #:8 >:6 s:14; #:8 >:6 s:14; S#:34 S>:26 S:60
03:30:43.778 : echo: #:9 >:6 s:15; #:10 >:7 s:17; #:8 >:7 s:15; #:9 >:6 s:15; S#:36 S>:26 S:62
#: draw a stripe
>: transfer a stripe
s: sum of of draw and transfer for one stripe
S#: sum of draws for a complete screen
S>: sum of transfers for a complete screen
S: time to draw and transfer a complete screen
2016-12-05 12:22:54 -06:00
Scott Lahteine
f882355994
Merge pull request #5318 from Sebastianv650/Account_for_LCD_improvements
...
Account for LCD improvements in ENSURE_SMOOTH_MOVES
2016-12-05 11:23:58 -06:00
Scott Lahteine
20e834461d
Merge pull request #5385 from thinkyhead/rc_ftostr4sign_decimal
...
Show decimal for small numbers in ftostr4sign
2016-12-05 11:22:45 -06:00
Scott Lahteine
b6b100c471
Merge pull request #5371 from thinkyhead/rc_extruders_can_differ
...
Allow distinct factors for multiple extruders
2016-12-05 11:22:31 -06:00
Scott Lahteine
449d9cbf60
Add placeholders for Polish translatable strings
2016-12-05 10:37:00 -06:00
c64pl
643dc4b64e
Update language_pl.h
...
Fixed translations
2016-12-05 10:37:00 -06:00
Scott Lahteine
0974b75fb6
Merge pull request #5386 from thinkyhead/rc_galician_update
...
Galician language update.
2016-12-05 10:36:26 -06:00
Rafa Couto
2b9115330d
Galician language update.
2016-12-05 10:11:28 -06:00
Scott Lahteine
1f3e2440bc
Merge pull request #5175 from thinkyhead/rc_dualx_homing
...
Unpark when using Z_SAFE_HOMING with Dual X
2016-12-05 10:02:56 -06:00
Scott Lahteine
d5bf1684fe
Implement as optional feature LCD_DECIMAL_SMALL_XY
...
And reduce the function size to simplify
2016-12-05 09:26:05 -06:00
Guthenberg
bfb8d3b53e
Show more decimals in Display, if possible
...
_123, -123, _-12, __-1 plus 1234, 12.3, -1.2
2016-12-05 09:05:46 -06:00
Scott Lahteine
1e30d1da47
Simplify itostr4sign
...
- This function becomes obsolete if ftostr4sign is re-written.
2016-12-05 09:05:46 -06:00
Scott Lahteine
82a187acae
Merge pull request #5359 from AnHardt/update-de
...
Add missing translations to lang-de
2016-12-05 07:31:28 -06:00
Scott Lahteine
4bafdf4b66
Support DISTINCT_E_FACTORS in LCD Motion Menu
2016-12-05 07:26:18 -06:00
Scott Lahteine
3391c785c6
Support for distinct E factors
2016-12-05 07:26:18 -06:00
Scott Lahteine
0dfe95eaba
Adjust formatting in Planner
2016-12-05 07:26:17 -06:00
Scott Lahteine
09587f7c0d
Fix rows error in DOGM
2016-12-05 07:14:11 -06:00
Scott Lahteine
c47e07d129
Fix Dual X software endstops
2016-12-05 06:51:41 -06:00
Scott Lahteine
4217e9653e
Adjust park code in tool_change
2016-12-05 06:51:41 -06:00
Scott Lahteine
b20405db31
Only DXC_AUTO_PARK_MODE should auto-move in tool_change
2016-12-05 06:48:43 -06:00
Scott Lahteine
ca24af7d5d
Dual X with home_z_safely is not parked
2016-12-05 06:43:26 -06:00
Scott Lahteine
0e15b4f434
Dual X set_axis_is_at_home can use x_home_pos for both
2016-12-05 06:43:26 -06:00
Scott Lahteine
54109dfaec
Reduce code size for Dual X un-park
2016-12-05 06:43:26 -06:00
Scott Lahteine
fe96f74db1
Use const arguments in Dual X helper functions
2016-12-05 06:43:26 -06:00
Scott Lahteine
41278c1e8b
Apply LOGICAL_POSITION to home positions on Dual X
2016-12-05 06:43:26 -06:00
Scott Lahteine
053fb55af6
Fix modes ordering in prepare_move_to_destination_dualx
2016-12-05 06:43:26 -06:00
Scott Lahteine
ee50928eee
Make LOGICAL and RAW position macros ternary-compatible
2016-12-05 06:43:26 -06:00
Scott Lahteine
56dd15c0ad
Use SET_INPUT for PS_ON_PIN in kill
2016-12-05 06:43:26 -06:00
Scott Lahteine
200cf3e9f9
Merge pull request #5381 from thinkyhead/rc_fix_fade_factor
...
Properly apply fade_factor to MBL
2016-12-05 06:06:13 -06:00
Scott Lahteine
84ff78c1e3
Pass the fade factor to mbl.get_z
2016-12-05 03:01:51 -06:00
Scott Lahteine
85c2b96685
Apply const to MBL class methods
2016-12-05 02:50:59 -06:00
Scott Lahteine
c06161b773
Use apply_leveling, not MBL directly
2016-12-05 01:53:36 -06:00
Scott Lahteine
818f8b93d3
Merge pull request #5378 from thinkyhead/rc_duration_rj
...
Better alignment of elapsed print time
2016-12-04 22:42:23 -06:00
Scott Lahteine
9d88a61d52
Better alignment of elapsed print time
2016-12-04 21:30:49 -06:00
Scott Lahteine
0b53d78046
Tweak editable items for debugging
2016-12-04 03:51:10 -06:00
Scott Lahteine
fccc97de6d
Save PROGMEM with string changes
...
Unlike RAM-based strings, PROGMEM strings aren’t consolidated by the
compiler.
2016-12-03 19:21:46 -06:00
AnHardt
e7fc353f08
Add missing translations to lang-de
2016-12-03 20:51:49 +01:00
Scott Lahteine
3f2cb376e0
Add placeholders for Bulgarian translation
2016-12-03 12:14:02 -06:00
Scott Lahteine
b22d37ba52
Merge pull request #5364 from thinkyhead/rc_croatian_update
...
Update Croatian to include missing strings
2016-12-03 11:37:42 -06:00
Robert Marko
b796a687ca
Update Croatian to include missing strings
...
Added all missing strings according to English
2016-12-03 11:15:41 -06:00
Scott Lahteine
255ed80164
Fix hotend offset report in M503
2016-12-03 10:17:35 -06:00
Petr Zahradník
c66f3ed34b
Update Czech
2016-12-03 10:32:34 +01:00
Scott Lahteine
cbf208ea1f
Merge pull request #5348 from Kaibob2/patch-1
...
Update language_de.h
2016-12-03 01:53:24 -06:00
Scott Lahteine
a2660cf688
Merge pull request #5347 from tnw513/fix-italian
...
Added missing translations
2016-12-03 01:52:45 -06:00
Scott Lahteine
27dd5acc22
Fix set_led_color for BLINKM
...
Follow-up to #5330
2016-12-03 01:51:11 -06:00
Kai
8530c32309
Update language_de.h
...
Grammar corrections
2016-12-02 19:40:36 +01:00
Silvio Didonna
f1d5ffa211
Added missing translations
2016-12-02 18:49:39 +01:00
Scott Lahteine
b0361ebe4f
Merge pull request #5343 from thinkyhead/rc_invert_case_light
...
Allow case light pin to be active low
2016-12-02 01:17:11 -06:00
Scott Lahteine
f60b4f8659
Allow case light pin to be active low
2016-12-01 23:32:34 -06:00
Scott Lahteine
3f4c02e42f
Merge pull request #5259 from Sebastianv650/Allow_UART-ISR_inside_Stepper
...
Allow UART ISRs inside the stepper ISR
2016-12-01 23:17:42 -06:00
Scott Lahteine
d07229f185
Fix redraw in SD Card menus
2016-12-01 18:15:58 -06:00
Scott Lahteine
47b4b21308
Merge pull request #5331 from esenapaj/Fix-for-the-PR-#5072
...
Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
2016-12-01 13:37:02 -06:00
Scott Lahteine
8d14420331
Fix compile without ENABLE_LEVELING_FADE_HEIGHT
2016-12-01 11:37:24 -06:00
Scott Lahteine
415294801f
Merge pull request #5330 from thinkyhead/rc_rgb_led
...
Support for an RGB LED using 3 pins
2016-11-30 14:14:00 -06:00
esenapaj
0909cf3d46
Adjust spacing
2016-11-30 19:39:39 +09:00
esenapaj
8e9e9c17b0
Follow-up the PR #5323 (Adding ukrainian language support)
...
・Update forgotten Configuration_adv.h of Felix\DUAL and K8400\Dual-head
2016-11-30 19:39:39 +09:00
esenapaj
d92ce8849b
Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
...
・Make descriptions the same as others
2016-11-30 19:39:38 +09:00
Scott Lahteine
e00b380489
Merge pull request #5323 from akaJes/lang-ua
...
Adding ukrainian language support
2016-11-30 01:10:40 -06:00
Scott Lahteine
65c50e062e
Support for an RGB LED using 3 pins
2016-11-30 00:02:31 -06:00
esenapaj
3047f3c85c
Suppress warning
2016-11-30 00:32:56 +09:00
jes
f674246397
extend Configurations files
2016-11-29 15:04:36 +02:00
jes
c90191faaf
adding ukrainian laguage support
2016-11-29 14:49:45 +02:00
Sebastianv650
912704a0d8
Enable ISRs inside temperature ISR
...
to capture chars at UART at 250000 baud.
2016-11-28 20:08:50 +01:00
Sebastianv650
f62f4006af
Account for LCD improvements in ENSURE_SMOOTH_MOVES
...
.. and give the hint to try lower values if possible.
2016-11-28 17:44:19 +01:00
Scott Lahteine
092e949b58
Merge pull request #5169 from thinkyhead/rc_core_inverted
...
Support for COREYX, COREZX, COREZY
2016-11-28 02:26:41 -06:00
Scott Lahteine
e9e4208ff1
Merge pull request #5274 from Sebastianv650/improve_smooth_moves
...
Improvement for ENSURE_SMOOTH_MOVES
2016-11-28 02:22:08 -06:00
Scott Lahteine
c7935bb0d2
Merge pull request #5299 from thinkyhead/rc_bed_correction_fade
...
Add a fade factor for mesh leveling
2016-11-28 02:07:51 -06:00
Scott Lahteine
a69b1ee691
Merge pull request #5313 from thinkyhead/rc_fix_menu_actions
...
Keep drawing menu unless screen changes
2016-11-28 02:01:39 -06:00
Scott Lahteine
32ee3acf86
Merge pull request #5315 from thinkyhead/rc_fixup_material_menus
...
Refine material heatup menu items
2016-11-28 01:46:51 -06:00
Scott Lahteine
c70a06daf1
lcd_save_previous_menu => lcd_save_previous_screen
2016-11-28 01:46:18 -06:00
Scott Lahteine
13ea43cc8d
Only exit menu handler when the screen changes
2016-11-28 01:46:18 -06:00
Scott Lahteine
f45b6a7762
Merge pull request #5314 from thinkyhead/case_light_menu_fix
...
Fix and optimize case-light code
2016-11-28 01:45:27 -06:00
Scott Lahteine
59fafb93b2
Merge pull request #5304 from AnHardt/pixel-shifting
...
MENU_HOLLOW_FRAME for the menu screens
2016-11-28 01:41:47 -06:00
Scott Lahteine
0951d385ce
Don't set heater temperature above its maximum
2016-11-28 01:37:24 -06:00
Scott Lahteine
c9193e856d
Limit preheat parameters based on all nozzles
2016-11-28 01:37:24 -06:00
Scott Lahteine
bb4529f7d2
PLA / ABS => Material 1 / 2
2016-11-28 01:37:24 -06:00
Scott Lahteine
61437d988a
Fix and optimize case-light code
2016-11-28 01:34:52 -06:00
AnHardt
7a9fa78822
MENU_HOLLOW_FRAME for the menu screens
...
MENU_HOLLOW_FRAME for the menu screens and
some pixel shifting to optimize the look with tall fonts. (cn)
2016-11-27 22:59:05 +01:00
AnHardt
24ca1a6289
Not more then 4 stripes for u8g-devices
...
To optimise speed.
Costs well invested 128Byte of RAM.
2016-11-26 19:08:33 +01:00
Scott Lahteine
aee71c543e
Minor formatting in language.h
2016-11-26 06:53:52 -06:00
Scott Lahteine
05d8d189f6
Adjust spacing in utf_mapper.h
2016-11-26 06:53:52 -06:00
Scott Lahteine
5460a529da
Add option DOGM_SPI_DELAY_US
2016-11-26 06:53:52 -06:00
Scott Lahteine
71842b6a17
Apply const to LCD arguments and locals
2016-11-26 06:53:52 -06:00
Scott Lahteine
b1abd7edef
Optimize graphical display with selective rendering
2016-11-26 06:53:52 -06:00
AnHardt
b91fab2d7d
Fix USE_BIG_EDIT_FONT
2016-11-26 13:50:25 +01:00
Scott Lahteine
4cd73e183d
Hide hidden files and folders
2016-11-26 06:26:28 -06:00
Scott Lahteine
f6f77d34a1
Add a fade factor for mesh leveling
2016-11-26 03:41:26 -06:00
AnHardt
75fdcc14b7
Activate font and mapper for el-gr
2016-11-26 02:30:37 +01:00
AnHardt
a0004e7cd3
Change font decent to -1 for tt and gr
...
For speeding up font drawing unify font decent.
Tr and Gr have ben the only fonts with a font decent of -2.
Sorry for some, a bit compressd, but hopefully still readeble symbols.
2016-11-26 02:29:23 +01:00
Scott Lahteine
307f263f89
Merge pull request #5292 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-11-25 16:56:49 -06:00
esenapaj
7070143042
Update Japanese translation
...
・Add new translation
2016-11-24 21:10:40 +09:00
esenapaj
ef97645002
Follow-up the PR #5255 (Case light menu (3rd attempt))
2016-11-24 19:42:05 +09:00
Scott Lahteine
2a9b3376a9
Merge pull request #5289 from thinkyhead/rc_which_menu_actions
...
Drop "static" keyword in ultralcd.cpp function declarations
2016-11-23 23:04:05 -06:00
Scott Lahteine
b97dafe4b8
Drop "static" keyword in ultralcd.cpp function declarations
2016-11-23 20:43:01 -06:00
Scott Lahteine
2e966f8e5b
Patch Capabilities Report for "PROGRESS"
2016-11-23 19:31:46 -06:00
Scott Lahteine
f60321d3e3
Merge pull request #5284 from thinkyhead/rc_turkish_update
...
Turkish update (squashed)
2016-11-23 14:57:52 -06:00
Mehmet Sutas
a26668b10c
Add UTF8 Turkish Translation
2016-11-23 14:19:16 -06:00
Mehmet Sutas
61aa796307
Added Human Readable Comments
2016-11-23 14:19:16 -06:00
Mehmet Sutas
6fb9c6fe07
Follow-up for #5167 Turkish Language
...
Add check for Turkish Font before setting better font for graphic displays
2016-11-23 14:19:15 -06:00
Scott Lahteine
d891324830
Merge pull request #5258 from mosh1/mbl_speed_fix
...
Fix z feedrate value when doing mesh bed leveling. probe feedrate use…
2016-11-23 14:15:01 -06:00
Scott Lahteine
7f8133a51f
Merge pull request #5255 from Kaibob2/CaseLightMenu
...
Case light menu (3rd attempt)
2016-11-23 13:46:33 -06:00
Kai
e9b42f4f47
Update language_de.h
2016-11-23 19:29:19 +01:00
Kai
0c341f0c50
Added Menu entry for Case light
2016-11-23 19:29:15 +01:00
Scott Lahteine
3bc2273ac9
Comment M540
2016-11-21 18:08:00 -06:00
Scott Lahteine
14b74181f5
Merge pull request #5179 from thinkyhead/rc_TMC2130
...
TMC2130 "Silent StepStick" support
2016-11-21 14:10:52 -06:00
Scott Lahteine
bb2114a060
Merge pull request #5264 from thinkyhead/rc_delta_safe_zone
...
Add an option for delta to home to the top
2016-11-21 13:56:44 -06:00
Scott Lahteine
38466b1d2f
Merge pull request #5271 from esenapaj/Fix-for-the-PR-#5267
...
Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
2016-11-21 13:55:56 -06:00
Scott Lahteine
9b96a4a53b
Merge pull request #5246 from thinkyhead/rc_some_cleanup
...
Minor stepper cleanup
2016-11-21 13:55:25 -06:00
Sebastianv650
8190483eeb
Improvement for ENSURE_SMOOTH_MOVES
...
Instead of waiting for a single long block, compare the complete block
buffer runtime for the long_move() check.
2016-11-21 17:58:24 +01:00
esenapaj
da67037550
Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
...
・Fix memory leak
2016-11-21 22:31:01 +09:00
Scott Lahteine
0f891e848b
Merge pull request #5268 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-11-21 03:18:36 -06:00
esenapaj
190a04c467
Update Japanese translation
...
・Change translation for 16 width LCD
2016-11-21 17:51:43 +09:00
esenapaj
7b836a4000
Introduce a +1234.56 format for over 999 steps/mm
2016-11-21 17:45:07 +09:00
Scott Lahteine
3e0376b45e
Reorder M114 and M119 gcode cases
2016-11-21 00:52:19 -06:00
Scott Lahteine
644fac5d34
Reduce all stepper_indirection init code with macros
2016-11-21 00:52:18 -06:00
Scott Lahteine
4e4f37b6c2
Code formatting for TMC and L6470 config options
2016-11-21 00:52:18 -06:00
Scott Lahteine
127e21ae00
Extend M122 for all steppers
2016-11-21 00:52:18 -06:00
Scott Lahteine
bf5f5f44cc
Make TMC2130 init code auto-configure
...
Simply apply enabled settings instead of requiring users to edit
stepper_indirection.cpp
2016-11-21 00:52:17 -06:00
Moritz
d67c1d825f
Add TMC2130 support
2016-11-21 00:17:45 -06:00
Scott Lahteine
11effeee2c
Add an option for delta to home to the top
2016-11-20 23:12:07 -06:00
Sebastianv650
50059690e0
Allow UART ISRs inside the stepper ISR
...
If the stepper ISR takes too long, chars are lost which leads to serial
communication errors like "Line number not +1" or "Wrong checksum". In
worst case, the printer can even do crazy moves.
With this changes, UART interrupts are handled inside the stepper ISR.
This way, no chars should be lost.
2016-11-20 13:09:12 +01:00
Moshen Chan
29b174bfb9
Fix z feedrate value when doing mesh bed leveling. probe feedrate uses XY_PROBE_SPEED
2016-11-19 16:34:41 -08:00
AnHardt
88b38eafd8
Endstop interrupt refinement
...
At the start of a move, check if the endstops are already triggered.
The 'change' interrupts will not see a change if already triggered.
2016-11-19 13:30:49 +01:00
Scott Lahteine
79c8591192
Merge pull request #5253 from thinkyhead/rc_smooth_move_ex-lax
...
Ensure smooth print moves even with LCD enabled
2016-11-19 01:38:41 -06:00
Scott Lahteine
0215cacb30
Merge pull request #5247 from esenapaj/Re-follow-the-PR-#4634
...
Re-follow the PR #4634 (Set language display charset in language.h)
2016-11-19 01:32:40 -06:00
Scott Lahteine
2cc32d85a3
Adjust ENSURE_SMOOTH_MOVES coding style
2016-11-19 01:28:48 -06:00
Scott Lahteine
072541f286
Update ENSURE_SMOOTH_MOVES in all configs
2016-11-19 01:28:47 -06:00
Sebastianv650
de89dc9f04
Ensure smooth print moves even with LCD enabled
...
lcd_update can take so much time that the block buffer gets drained if
there are only short segments. This leads to jerky printer movements for
example in circles and a bad print quality.
This change implements a simple check: Only if the block currently
executed is long enough, run lcd_update.
This also means the printer will not show actual values on the LCD nor
will it respond to buttons pressed. A option that keeps the menu
accessible is also available.
Aditionaly, slow down if a block would be so fast that adding a new
block to the buffer would take more time. In this case, the buffer would
drain until it's empty in worst case.
2016-11-19 01:28:47 -06:00
Scott Lahteine
87b6b19256
Patch CASE_LIGHT typo
2016-11-18 23:49:12 -06:00
Scott Lahteine
0be6167f14
Merge pull request #5250 from CONSULitAS/RCBugFix_K8200_backinsync_2016-11-18
...
K8200: Example configuration back in sync
2016-11-18 22:49:18 -06:00
Scott Lahteine
eb714ee873
Move dummy thermistor opts, fix redundant sensor comment
2016-11-18 22:24:48 -06:00
Scott Lahteine
7a99c6ce4f
Reformat temp sensor listing
2016-11-18 22:24:47 -06:00
Scott Lahteine
181cdb3cfe
Move GCode list above include lines
2016-11-18 22:24:46 -06:00
Scott Lahteine
25d0c167bd
More detailed static_assert messages
2016-11-18 22:24:46 -06:00
Scott Lahteine
eb120e518c
Followup to new endstop interrupts feature
...
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
2016-11-18 21:53:45 -06:00
Scott Lahteine
832fe284b4
Merge pull request #5184 from AnHardt/endstop_interrupts
...
Introduce endstop interrupts
2016-11-18 20:50:24 -06:00
CONSULitAS
cbae44df64
K8200: Example configuration back in sync
...
Configuration.h: back in sync, new features configured
Configuration_adv.h: back in sync, new features configured
README.md: text updated
2016-11-18 22:55:02 +01:00
esenapaj
5db3738fe7
Re-follow the PR #4634 (Set language display charset in language.h)
2016-11-18 17:44:49 +09:00
Scott Lahteine
6eb6f12c64
Patch up some language formatting
2016-11-18 01:16:58 -06:00
Bo Herrmannsen
8cffa60cc5
Update to Danish language 10/11-2016
2016-11-18 01:16:57 -06:00
Scott Lahteine
98600e1433
Minor stepper cleanup
2016-11-18 01:15:57 -06:00
Florian Heilmann
d08867986e
Add autotemp capabilities to M104
...
This allows M104 to pass the F and B parameters to enable autotemp as well
2016-11-17 11:28:19 -06:00
Sebastianv650
c11b2bb777
Bugfix LIN_ADV
...
Advance has nothing todo with Z_AXIS, strange copy&paste error?
2016-11-17 11:28:19 -06:00
Scott Lahteine
ee0765e872
Merge pull request #5233 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-11-17 03:38:19 -06:00
Scott Lahteine
2330619da0
Merge pull request #5191 from petrzjunior/const
...
Replace const bool with #define for consistency
2016-11-17 03:37:32 -06:00
esenapaj
b278b7a395
Update Japanese translation
...
Only adjust spacing
2016-11-17 09:05:51 +09:00
Petr Zahradník junior
d7ce5d271b
Replace const bool with #define for consistency
2016-11-16 18:55:21 +01:00
Scott Lahteine
d63230d73e
Merge pull request #5192 from Kaibob2/patch-7
...
Printer Stats / Completed prints line doesn't fit in display (when german)
2016-11-16 00:16:36 -06:00
Scott Lahteine
548b45026d
Merge pull request #5214 from Sebastianv650/RCBugFix_planner_opt
...
Save some cycle inside the planner
2016-11-16 00:06:55 -06:00
Scott Lahteine
5d23e52d75
Merge pull request #5228 from thinkyhead/rc_keep_last_mix
...
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
2016-11-15 19:12:01 -06:00
Scott Lahteine
db47aa983d
Merge pull request #5226 from mtowara/RCBugFix
...
bump -std in Makefile to c++11
2016-11-15 16:13:32 -06:00
Scott Lahteine
99b0c1fe56
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
2016-11-15 16:12:26 -06:00
Markus Towara
23a675f621
reduce binary size of .hex
...
still a few bytes bigger than with arduino but nothing major
2016-11-15 21:57:15 +01:00
Markus Towara
5b6e2cecf5
bump c/c++ standard to gnu11
...
needed for constexpr
2016-11-15 21:54:12 +01:00
Scott Lahteine
410657b050
Fix G30 with limits, print correct probe XY
2016-11-15 14:10:28 -06:00
AnHardt
f3eee02596
Introduce endstop interrupts
...
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.
The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.
This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
2016-11-15 12:07:41 +01:00
Sebastianv650
e3ffb58fbd
Save some cycle inside the planner
...
planner.h:
fan speed is used to set integer variables, so no need for long.
Basicaly a byte should be enough for all the fan things, as it's 0-255?
planner.cpp:
Save some float multiplications.
We could squeeze out even more by defining feedrate_percentage,
saved_feedrate_percentage and flow_percentage as float instead of int.
Everytime they are used in the time-critical planner, they are casted to
float and multiplied by 0.01. Not done jet, as they are used in LCD menu
functions I don't know well enough.
2016-11-13 13:34:12 +01:00
Scott Lahteine
665b7f3893
Merge pull request #5212 from thinkyhead/rc_mixing_faster
...
Store mix factors as reciprocals and multiply
2016-11-12 18:47:11 -06:00
Scott Lahteine
60cc9342a4
Merge pull request #5188 from thinkyhead/rc_extended_host_support
...
Extended host support: M155 Auto temp report, M115 capabilities
2016-11-12 15:38:06 -06:00
Scott Lahteine
f663220e87
Store Mix factors as reciprocals and multiply
2016-11-12 15:19:18 -06:00
Scott Lahteine
ea3c08d249
Merge pull request #5186 from esenapaj/Follow-up-the-PR-#5167-etc
...
Follow up the PR #5167 (Add Turkish Language) again, etc
2016-11-12 13:11:54 -06:00
Scott Lahteine
c488378532
Merge pull request #5205 from Sebastianv650/RCBugFix_stepperpatch
...
Remove useless line from stepper ISR
2016-11-12 12:43:07 -06:00
Michael Neumann
8bdf303da0
Update pins_MEGATRONICS_3.h
2016-11-12 12:26:07 +01:00
Michael Neumann
3890366c83
Update pins.h
2016-11-12 12:25:45 +01:00
Michael Neumann
c0d45ca7f2
Update boards.h
2016-11-12 12:24:47 +01:00
Sebastianv650
cdc18f8c22
Remove useless line from stepper ISR
...
The flag is already set inside planner.get_current_block(). Doing it
twice isn't making it better..
2016-11-11 19:35:03 +01:00
Kai
8e8b4398f3
Printer Stats / Completed prints line doesn't fit in display (when german)
2016-11-09 22:03:25 +01:00
Scott Lahteine
b31a07e261
Stateful M355 with separate P parameter
2016-11-09 03:28:18 -06:00
Scott Lahteine
3c9a838651
Extended capabilities report in M115
2016-11-09 02:32:58 -06:00
Scott Lahteine
68b866b5dd
Add M155 - Auto-report temperature with interval
2016-11-09 02:32:58 -06:00
Scott Lahteine
68b46fb2c9
Allow send to i2c address 0 (broadcast)
2016-11-08 17:54:55 -06:00
Scott Lahteine
75bfde9945
M155=>M260, M156=>M261
2016-11-08 17:54:54 -06:00
esenapaj
2ae72b0491
Follow up the PR #5167 (Add Turkish Language) again, etc
...
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
2016-11-09 06:31:21 +09:00
Scott Lahteine
06f2282f82
Merge pull request #5176 from thinkyhead/rc_filchange_feedback
...
Give instant feedback for filament change
2016-11-07 12:11:54 -06:00
Scott Lahteine
dcfd7c69e8
Merge pull request #5163 from nzinov/RCBugFix
...
Improve G30 probing command - add optional arguments
2016-11-07 11:37:13 -06:00
Scott Lahteine
e765eebfb0
Patch spacing in bilinear grid report
2016-11-07 04:08:25 -06:00
Scott Lahteine
7780052fb3
Give instant feedback for filament change
2016-11-07 03:48:16 -06:00
esenapaj
24e3f7abe7
Update Turkish translation
...
・Add new translation
2016-11-07 04:59:18 +09:00
esenapaj
be48792e9c
Follow up the PR #5167 (Add Turkish Language), etc
...
・Remove all the #ifndef
・Follow the PR #4603 (Strip never-translated strings from language
files)
・Follow the PR #4634 (Set language display charset in language.h)
・Follow the PR #4936 (Put max_jerk vars in array, clean up jerk code)
・Adjust spacing
2016-11-06 23:59:02 +09:00
Scott Lahteine
1864b282c5
Implement reversed CORE options
2016-11-05 23:47:51 -05:00
Scott Lahteine
e3c8318504
Add reversed CORE options
2016-11-05 23:47:46 -05:00
Rigid3D
2327764980
Add Turkish Language
2016-11-05 21:06:16 -05:00
Nikolay Zinov
dea00bbcf1
improve G30 probing
...
Add optional parameters
X, Y for probe point
S sets stowing on and off
2016-11-05 13:22:45 +03:00
Scott Lahteine
00662b8635
Minor babystep cleanup patches
2016-11-03 23:31:45 -05:00
Scott Lahteine
cad792e702
Reduce code for invariant lcd_detected
2016-11-03 23:31:45 -05:00
Scott Lahteine
b23d255491
Move macros above Stepper::babystep
2016-11-03 23:31:45 -05:00
Scott Lahteine
cc57d46158
Fix set_position for CoreYZ
2016-11-03 23:31:45 -05:00
Scott Lahteine
0269347682
Merge pull request #5141 from thinkyhead/rc_old_slowdown_what
...
OLD_SLOWDOWN does nothing, so remove it
2016-11-03 23:30:43 -05:00
Scott Lahteine
e92e2b2446
Merge pull request #5144 from Sebastianv650/RCBugFix_LIN_ADV_wipe
...
Account for wipe moves
2016-11-03 23:19:25 -05:00
Scott Lahteine
176aeafc19
Don't define bilinear_line_to_destination on kinematic setups
2016-11-03 14:10:07 -05:00
Sebastianv650
d448500643
Account for moves with negative E movements
...
Added a rule so that LIN_ADVANCE isn't used for moves with negative E movements (de_float will be negative in this cases).
I also added a more detailed comment to make it more clear what the if statement does.
2016-11-03 17:01:17 +01:00
Scott Lahteine
236853df22
Corrections to bilinear_line_to_destination
...
- Allow more than 9x9 probe points
- Account for the probe starting position
2016-11-03 04:43:59 -05:00
Scott Lahteine
0115e495fe
Fix up Dual X switch blocks
2016-11-02 21:38:50 -05:00
Scott Lahteine
2495ab7af2
Make dual_x_carriage_mode an enumeration
2016-11-02 21:38:49 -05:00
Scott Lahteine
d6c36f5bb9
Fix Z raise with DXC_AUTO_PARK_MODE
2016-11-02 21:36:50 -05:00
Scott Lahteine
0c79553fc5
Cast int to AxisEnum for some accessors
2016-11-02 17:42:24 -05:00
Scott Lahteine
adbf1f7dca
Add M355 to the GCodes list.
2016-11-02 16:43:52 -05:00
Scott Lahteine
63efc10599
Merge pull request #5134 from thinkyhead/rc_bilinear_split_lines
...
Split cartesian moves on grid boundaries with bilinear ABL
2016-11-02 16:14:55 -05:00
Scott Lahteine
12167bc8f3
OLD_SLOWDOWN does nothing, so remove it
2016-11-02 01:28:19 -05:00
esenapaj
c8c1a28f6f
Follow-up the PR #5089 (Centralize click-handling in the LCD loop)
...
bool feedback is no longer used
2016-11-02 08:36:02 +09:00
esenapaj
c3a105186d
Follow-up the PR #5133 (M355 Case light)
...
・Add CASE_LIGHT_PIN into pinsDebug.h
2016-11-02 00:31:50 +09:00
Scott Lahteine
ee5b8d6dc8
Split moves on grid boundaries with bilinear ABL on cartesian
2016-11-01 08:25:47 -05:00
Scott Lahteine
66744a6076
Merge pull request #5133 from thinkyhead/rc_M355_case_light
...
M355 Case light
2016-11-01 07:51:27 -05:00
Scott Lahteine
955d14acb0
Patch photo pin code style
2016-11-01 06:30:14 -05:00
Stanley
ab3f966f5f
Case light G-code M355
...
implemented G-Code M355 into Marlin
2016-11-01 06:30:14 -05:00
Scott Lahteine
8b44413498
Merge pull request #5124 from Sebastianv650/RCBugFix_LIN_ADV-Patch
...
BugFix for incorrect E-speed calculation
2016-11-01 05:13:17 -05:00
Scott Lahteine
f418e82b15
Remove redundant definition of EN_C
2016-11-01 05:10:07 -05:00
Sebastianv650
f9bea7968f
BugFix for incorrect E-speed calculation
...
The extrusion speed was wrong due to a not high enough precision of
esteps to XY steps, therefore now the target float values are used to
calculate the ratio between XY movement and extrusion speed.
The e_speed_multiplier8 was replaced by an absolute multiplier called
abs_adv_steps_multiplier8, therefore one multiplication and bitshift can
be saved inside the stepper ISR. Due to this, also extruder_advance_k is
better suited inside the planner and not the stepper files any more.
2016-11-01 08:08:47 +01:00
Bob-the-Kuhn
c20b4098be
2 bug fixes & some minor changes
...
see detailed description in PR #5118
2016-11-01 01:29:41 -05:00
Scott Lahteine
fa6bf12697
Merge pull request #5118 from thinkyhead/rc_expanded_M43
...
Enhancements to M43 pins debugging
2016-10-31 08:29:53 -05:00
Scott Lahteine
3a107e280d
Developer note in pins_MIGHTYBOARD_REVE.h
2016-10-31 08:22:39 -05:00
Scott Lahteine
85e307dcd8
No FAN0_PIN
2016-10-31 08:08:03 -05:00
Scott Lahteine
ff3a8ca0d1
Use NUM_DIGITAL_PINS instead of custom DIO_COUNT
2016-10-31 08:08:03 -05:00
Scott Lahteine
04a1fac029
Some cleanup to M43
2016-10-31 08:08:03 -05:00
Scott Lahteine
24f6612551
Reduce and optimize endstop_monitor code
2016-10-31 08:08:03 -05:00
Scott Lahteine
b4444e91ae
Reduce code and build size of PWM_details
2016-10-31 08:08:02 -05:00
Scott Lahteine
dbe414ef03
Squash redundant code in PWM_status
2016-10-31 08:08:02 -05:00
Scott Lahteine
af26d22741
Clean up some spacing and semantics
2016-10-31 08:08:02 -05:00
Bob-the-Kuhn
81397d7a9a
EXTRUDER_x_AUTO_FAN name change to Ex_AUTO_FAN
...
I stumbled across a name change that'll be used a lot so I'm updateing
the name list.
2016-10-31 08:08:02 -05:00
Bob-the-Kuhn
c7f1f0dae6
Add endstop monitor & make pins report pretty
2016-10-31 08:08:02 -05:00
Scott Lahteine
d567b426d5
Merge pull request #4894 from thinkyhead/rc_mightyboard_rev_e
...
Mightyboard Revision E preliminary support
2016-10-31 08:01:41 -05:00
Scott Lahteine
43df9ace4e
Merge pull request #5110 from thinkyhead/rc_z2_min_allowed
...
Support Z2 min in M119 report
2016-10-31 07:59:45 -05:00
Scott Lahteine
23f05f8be7
Use bit-length types in block_t
2016-10-30 16:16:29 -05:00
Scott Lahteine
8dc7807d85
Add support for CoreYZ to planner.buffer_line
2016-10-30 16:16:28 -05:00
Scott Lahteine
1cf878fdb1
Calculate dm and e-steps earlier in planner
2016-10-30 16:16:28 -05:00
Scott Lahteine
75dbb71dd7
Replace block.busy with a block.flag bit
2016-10-30 16:16:28 -05:00
Scott Lahteine
c7f22f688f
buffer_line can calculate while it's waiting
2016-10-29 17:08:42 -05:00
Scott Lahteine
f3720f4e81
const arguments to test_dual_z_endstops
2016-10-29 16:01:27 -05:00
Scott Lahteine
8cebd2a7db
Arrange Z2 min before Z2 max
2016-10-29 01:54:19 -05:00
Scott Lahteine
accabf088a
Add support for Z2 min endstop to M119
2016-10-29 01:54:02 -05:00
Scott Lahteine
396434a445
Fix compiler warning in M145
2016-10-28 20:57:36 -05:00
Scott Lahteine
8e787304c9
const float ref args in planner.h
2016-10-28 20:57:36 -05:00
Scott Lahteine
07bfc45df8
Adjust spacing in gcode_M149
2016-10-28 20:57:36 -05:00
Scott Lahteine
1a2310c494
Make LCD preheat vars an array to reduce code size
2016-10-28 20:57:36 -05:00
Scott Lahteine
1226ae1912
Some cleanup in ultralcd.h
2016-10-28 20:57:21 -05:00
Scott Lahteine
50ee749082
Centralize click-handling in the LCD loop
2016-10-28 20:57:21 -05:00
Scott Lahteine
47ad97c35e
Merge pull request #5109 from thinkyhead/rc_eeprom_M218_tool_offset
...
Save hotend_offset array (M218) in EEPROM
2016-10-28 20:08:29 -05:00
Scott Lahteine
bff6bbdb12
Indentation in configuration_store.cpp
2016-10-28 18:55:42 -05:00
Scott Lahteine
97115d56f9
Print error for M500 with disabled EEPROM
2016-10-28 18:53:48 -05:00
Scott Lahteine
67ab54185b
Save hotend_offset array (M218) in EEPROM
2016-10-28 18:45:23 -05:00
MagoKimbra
dfcdbb437b
Fix Command M420
2016-10-28 20:53:48 +02:00
Scott Lahteine
c34dbfb248
Merge pull request #5072 from thinkyhead/rc_preset_auto_fans
...
Add predefined AUTO_FAN_PINs to pins files
2016-10-27 17:12:11 -05:00
Scott Lahteine
9a23f73765
Don't trigger endstops that are actually Z2 or probe
2016-10-27 08:12:17 -05:00
Scott Lahteine
c07cc9e3f1
Revert changes made to z dual endstop test
...
#3631 broke z dual endstops. Solved by @Nocturnal42 in https://github.com/MarlinFirmware/Marlin/issues/5078#issuecomment-256572248
2016-10-27 07:41:39 -05:00
Scott Lahteine
c4c53856a4
Merge pull request #5094 from esenapaj/Fix-for-the-PR-#5088
...
Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)
2016-10-26 21:51:18 -05:00
Scott Lahteine
2e3110539b
Merge pull request #5095 from thinkyhead/rc_fix_bilinear_math
...
Fix bilinear grid constraints
2016-10-26 21:48:19 -05:00
esenapaj
d5a5042d23
Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)
2016-10-27 10:32:20 +09:00
Scott Lahteine
9cbedab91b
Use DPM where possible
2016-10-26 18:38:32 -05:00
Scott Lahteine
ad38d91692
Sanity check that auto fan pins can do PWM
2016-10-26 18:38:32 -05:00
Scott Lahteine
95275eb9b3
Predefine auto fan pins in some pins files
2016-10-26 18:38:32 -05:00
Scott Lahteine
3f94b15cef
Fix bilinear grid constraints
...
Followup to #5090
2016-10-26 18:11:26 -05:00
Scott Lahteine
d439fb95f7
Sanity check for the renamed options
2016-10-26 17:51:26 -05:00
Scott Lahteine
b6aa894893
Rename auto fan pins and add auto fan flags
2016-10-26 17:51:26 -05:00
Scott Lahteine
ada935de87
Allow TEMP_STAT_LEDS with only one LED defined
2016-10-26 17:51:26 -05:00
Scott Lahteine
4b056d8184
Fix warning in ultralcd.cpp
2016-10-26 17:51:26 -05:00
Scott Lahteine
9dfd029911
Fix bug in fastio.h _GET_TIMER
2016-10-26 17:51:25 -05:00
esenapaj
8b1d90e281
Follow-up the PR #5087 (Fixed SERVO pins on Azteeg X3), etc
...
・Add header
・Adjust spacing
2016-10-27 06:46:03 +09:00
Scott Lahteine
bfd3b3c604
Merge pull request #5087 from Fulg/azteeg-x3-pins
...
Fixed SERVO pins on Azteeg X3
2016-10-26 06:01:16 -05:00
Scott Lahteine
208d720614
Merge pull request #5082 from Fulg/RCBugFix
...
Only issue MAXTEMP when heating
2016-10-26 05:55:33 -05:00
Scott Lahteine
f0d673561f
Fix for bilinear grid outside bounds
2016-10-26 05:00:03 -05:00
Scott Lahteine
24bcea6c02
Merge pull request #5088 from thinkyhead/rc_break_m1_fix
...
Handle M108 in M1 also with ULTIPANEL
2016-10-26 00:44:01 -05:00
Scott Lahteine
1ba1ec0db9
Handle M108 in M1 also with ULTIPANEL
2016-10-25 23:25:47 -05:00
Scott Lahteine
7ad33422e3
Clear dir_t size, not pointer size
2016-10-25 22:59:40 -05:00
Benoit Miller
1c716034ec
Fixed SERVO pins on Azteeg X3
2016-10-25 17:11:26 -04:00
Benoit Miller
2aa12d78dc
Only issue MAXTEMP when heating
2016-10-24 17:09:29 -04:00
Scott Lahteine
3fcf915808
Fix uninitialized var in reset_acceleration_rates
2016-10-24 11:55:41 -05:00
Scott Lahteine
14f824c3de
Merge pull request #5071 from esenapaj/Extend-measuring-range-of-thermocouple
...
Extend measuring range of thermocouple for MAX31855
2016-10-24 02:00:12 -05:00
Scott Lahteine
1097a50694
Merge pull request #5070 from gcormier/rcbugfix
...
Fix #4995 - M48/G29 on CoreXY maybe others?
2016-10-24 00:56:36 -05:00
Sebastianv650
c397b9d60a
Planner acceleration bugfix and speedup v2
...
.) Use already existing inverse_millimeters instead of /
block->millimeters.
.) Prevent overflow during acceleration calculation by checking if float
is necessary. Idea modified from Sailfish.
.) Save two uint32_t or even float multiplications by checking if
step[AXIS] has steps and if max acceleration is lower than accel. If
not, there is no need to check this axis.
2016-10-23 12:47:46 +02:00
esenapaj
70e287ca8c
Extend measuring range of thermocouple for MAX31855
2016-10-23 10:22:39 +09:00
Greg Cormier
f0aed9dac7
Fix #4995 - M48/G29 on CoreXY maybe others?
2016-10-22 20:45:13 -04:00
esenapaj
e50992694f
Fix for the PR #5066 (Updated french translation)
...
MSG_INFO_PRINT_TIME is still being used
2016-10-23 06:09:56 +09:00
Scott Lahteine
483082387c
Merge pull request #5022 from esenapaj/Fix-for-the-PR-#4553
...
Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD))
2016-10-22 13:54:09 -05:00
Scott Lahteine
8b967a9ff0
Merge pull request #5058 from thinkyhead/rc_reverse_arrow_buttons
...
Apply encoder reverse options to keypad arrows
2016-10-22 13:52:35 -05:00
esenapaj
523c7eaa6c
Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD))
2016-10-23 03:29:00 +09:00
Scott Lahteine
ca48a49fdb
Merge pull request #5065 from petrzjunior/transl
...
[LANGUAGE] Update Czech (BLTOUCH and DAC strings)
2016-10-22 12:46:10 -05:00
Scott Lahteine
f0744fc815
Merge pull request #5066 from thinkyhead/rc_french_update
...
Updated french translation
2016-10-22 12:45:51 -05:00
Gege2B
88b7f6eb46
Updated french translation
2016-10-22 12:30:22 -05:00
Scott Lahteine
3544c3632f
Merge pull request #5062 from thinkyhead/rc_warnings_fix
...
Warnings fixed redux
2016-10-22 12:21:36 -05:00
Petr Zahradník junior
8323d78ed7
Translated BLTOUCH and DAC strings
2016-10-22 19:12:21 +02:00
Scott Lahteine
e151f952a3
Apply encoder reverse options to keypad arrows
2016-10-22 11:51:33 -05:00
Scott Lahteine
cfb47929ca
Merge pull request #5060 from thinkyhead/rc_fix_ugly_code
...
Reduce, clean up MINTEMP / MAXTEMP test code
2016-10-22 11:27:30 -05:00
Josef Pavlik
dca50737f5
fixed warning: ISO C++ forbids compound-literals
2016-10-22 11:23:16 -05:00
Josef Pavlik
0bd66807b2
fixed warning: extra ;
2016-10-22 11:12:29 -05:00
Josef Pavlik
d35dc407a8
fixed warning: ISO C99 requires rest arguments to be used
2016-10-22 11:12:29 -05:00
Josef Pavlik
c2b51af3ba
fixed warning: ISO C does not permit named variadic macros
2016-10-22 11:12:29 -05:00
Scott Lahteine
0d3fc7dd89
Merge pull request #5059 from gcormier/fixbaby
...
Set defer delay back to false when exiting babystepping.
2016-10-22 10:59:17 -05:00
Scott Lahteine
f888597197
Reduce, clean up code for mintemp/maxtemp tests
2016-10-22 10:31:03 -05:00
Scott Lahteine
ad64723354
Move MAX_EXTRUDERS to pins.h
2016-10-22 10:07:51 -05:00
Scott Lahteine
5f5a55a0de
Add a ZERO macro to clear arrays
2016-10-22 10:07:18 -05:00
Greg Cormier
0009725637
Set defer delay back to false when exiting babystepping.
2016-10-22 09:43:30 -04:00
Scott Lahteine
627f9d5285
Merge pull request #5056 from thinkyhead/rc_lin_adv_opt
...
LIN_ADVANCE optimizations
2016-10-22 07:06:39 -05:00
Scott Lahteine
0908329d96
Merge pull request #5057 from thinkyhead/rc_mbl_lcd_logical
...
Fix manual leveling coordinates
2016-10-22 06:31:02 -05:00
Scott Lahteine
14e60f0d3b
Correct typo in configs
...
As pointed out by #5044
2016-10-22 05:56:32 -05:00
Scott Lahteine
1165e83263
MBL coordinates are logical
2016-10-22 05:55:44 -05:00
Scott Lahteine
dbfabb4c0a
Merge pull request #5043 from Kaibob2/patch-5
...
Correct grammar and translation in language_de.h
2016-10-22 05:52:54 -05:00
Scott Lahteine
b19bba275f
No LCD timeout during babystepping
...
As requested in #5031
2016-10-22 05:26:07 -05:00
Scott Lahteine
b9109b2875
Improve LIN_ADVANCE commentary (all configs)
2016-10-22 05:03:09 -05:00
Sebastianv650
9818d97587
Fix Z-hops during retract/prime lead to blobs
...
We don't want to have retract/prime movements done with LIN_ADVANCE, that's also true with simultaneously executed Z-hops.
2016-10-22 04:54:59 -05:00
Sebastianv650
599649e45d
Add formula for LIN_ADVANCE_K
...
With this formula, a start value for K for further fine-calibration can be calculated.
2016-10-22 04:54:59 -05:00
Scott Lahteine
be7d245eff
Merge pull request #5008 from thinkyhead/test_endstop_hits
...
Save some PROGMEM in MBL G28
2016-10-22 03:35:52 -05:00
Scott Lahteine
7c0e52256d
Merge pull request #5053 from thinkyhead/rc_fix_baud_config
...
Patch BAUDRATE line in configs
2016-10-22 03:27:45 -05:00
Scott Lahteine
2783dcb4cc
Save some RAM in MBL's G29
2016-10-22 02:52:56 -05:00
Scott Lahteine
4f5a8c05d5
Tweaks to endstops macros
2016-10-22 02:52:56 -05:00
Scott Lahteine
083d41a2c2
Remove redundant estep rate code from LIN_ADVANCE
...
As noted by https://github.com/MarlinFirmware/Marlin/pull/4971#issuecomment-252503295
2016-10-22 02:19:14 -05:00
Scott Lahteine
4f6bfabaad
Patch BAUDRATE line in configs
2016-10-22 00:48:52 -05:00
Kai
2bfedb74d5
Correct grammar and translation in language_de.h
...
Made Filament change Text sound like correct german.
2016-10-19 14:56:46 +02:00
esenapaj
1e1edeadd3
Fix for the commit dc2cb84 (Revert acceleration limiting to avoid overflow)
...
・Add forgotten '\'
2016-10-18 18:07:20 +09:00
Scott Lahteine
dc2cb8454c
Revert acceleration limiting to avoid overflow
2016-10-17 17:08:41 -05:00
Scott Lahteine
6ae5cf17a9
Merge pull request #5033 from esenapaj/Fix-freezing-with-MAX31855
...
Fix freezing and MINTEMP Error with MAX31855 thermocouple
2016-10-17 16:22:20 -05:00
Scott Lahteine
f257c4bcae
Merge pull request #5036 from thinkyhead/rc_dac_code_deps
...
Fix DAC current code
2016-10-17 16:19:00 -05:00
Scott Lahteine
b80cc0cbb5
Fix DAC current code
2016-10-17 15:17:57 -05:00
esenapaj
385bd8a4a3
Fix freezing and MINTEMP Error with MAX31855 thermocouple
2016-10-16 07:33:14 +09:00
Scott Lahteine
ca7275a67a
Disable EXTRAPOLATE_FROM_EDGE by default
2016-10-14 14:44:28 -05:00
Scott Lahteine
0921c7da84
Merge pull request #4997 from thinkyhead/rc_jerk_from_mk2
...
Adapt Jerk / Speed code from Prusa MK2
2016-10-12 06:38:50 -05:00
Scott Lahteine
4d89652bc2
Apply minor optimizations to planner.cpp
2016-10-12 04:42:15 -05:00
Scott Lahteine
1092319b19
Adapt speed/jerk code based on Prusa MK2 branch
2016-10-12 04:42:14 -05:00
Scott Lahteine
37643fef63
Merge pull request #4972 from bgort/platformio-improvements
...
Move platformio directories out of source tree
2016-10-12 03:42:33 -05:00
Scott Lahteine
8e1cc9332a
Replace block flag bools with flag bits
...
…and apply const to some method parameters
2016-10-10 23:17:49 -05:00
Scott Lahteine
d41f2bdbd8
Merge pull request #4991 from thinkyhead/rc_max31855_fix
...
Patches for Stepper DAC and MAX31855
2016-10-10 20:12:06 -05:00
Scott Lahteine
e7cf566fc5
Do kinematic segments with buffer_line_kinematic
...
This breaks the raw option, but in the future perhaps all planner moves
will be sent in raw form instead of logical.
2016-10-10 17:14:03 -05:00
Scott Lahteine
a10e81dc2a
Minor cleanup of set_bed_leveling_enabled
2016-10-10 17:14:03 -05:00
Scott Lahteine
029824bc49
Patch ADJUST_DELTA macro for SCARA
2016-10-10 17:14:03 -05:00
Scott Lahteine
5ce5a9c822
Marlin: planner.h tweak
2016-10-10 17:14:03 -05:00
Scott Lahteine
d963020532
Sort out some header dependencies
2016-10-10 17:14:03 -05:00
Scott Lahteine
e17f9b8b99
DAC patches
...
As suggested by #4985
2016-10-10 14:08:04 -05:00
Scott Lahteine
2cb5df8a56
Merge pull request #4984 from esenapaj/Small-fix-for-PR-#4980
...
Small fix for the PR #4980 (LIN_ADVANCE bug fix and optimization)
2016-10-10 13:30:47 -05:00
Scott Lahteine
b6221df3f3
Merge pull request #4983 from MarlinFirmware/revert-4933-rc_drop_pid_func_range
...
Revert "Removal of PID functional range"
2016-10-10 13:29:54 -05:00
Scott Lahteine
a07033a6c1
Merge pull request #4974 from esenapaj/Follow-up-the-PR-#4955
...
Fix and follow-up the PR #4955 (PINS_DEBUGGING and M43: Read pin states), etc
2016-10-10 13:27:52 -05:00
Scott Lahteine
f8199b2cc1
Merge pull request #4982 from thinkyhead/rc_abl_bugfix
...
Fix planner with kinematics, delta ABL
2016-10-10 13:24:22 -05:00
esenapaj
f41c60d4a4
Follow-up the PR #4955 , etc
...
・More ANALOG NUMBERING to Analog Input
・Add comment header to all the section of all the pins files
・Sort sections as follows:
1. Some special definitions (USBCON, LARGE_FLASH, etc)
2. Servos
3. Limit Switches
4. Z Probe
5. Steppers
6. Temperature Sensors
7. Heaters / Fans
8. Misc. Functions
9. LCD / Controller
・Move MAX6675_SS into "Temperature Sensors" section
・Adjust spacing
2016-10-10 14:22:43 +09:00
esenapaj
00456b0cb3
Fix compilation errors
2016-10-10 14:22:43 +09:00
esenapaj
cfb5c24bc9
Small fix for the PR #4980 (LIN_ADVANCE bug fix and optimization)
...
・Fix a comment about timer
2016-10-10 07:48:42 +09:00
Scott Lahteine
149b8d9e4b
Handle MAX31855 error conditions
2016-10-09 17:12:50 -05:00
Scott Lahteine
f4ec265363
Fix a typo
2016-10-09 16:45:29 -05:00
Scott Lahteine
4ec2d459e6
Fix mcp4728_setVref_all as followup to #4967
2016-10-09 16:45:00 -05:00
Scott Lahteine
1e551c0688
Revert "Squashed - Removal of PID functional range"
2016-10-09 16:27:45 -05:00
Scott Lahteine
4037df82b0
Merge pull request #4981 from esenapaj/Update-Japanese-language
...
Update Japanese translation, etc
2016-10-09 16:11:53 -05:00
Scott Lahteine
e4e290d957
Make EXTRUDER_RUNOUT_PREVENT kinematic compatible
2016-10-09 15:58:33 -05:00
Scott Lahteine
847429eff4
Make tool_change kinematic compatible
2016-10-09 15:58:32 -05:00
Scott Lahteine
a4a7ca10ca
Make USE_DELTA_IK_INTERPOLATION compatible with ABL
2016-10-09 15:58:32 -05:00
Scott Lahteine
c5cac486f5
Use a, b, c instead of lx, ly, lz
2016-10-09 14:34:24 -05:00
Josef Pavlik
f8c2473a71
Improve planner kinematics, fix delta ABL
2016-10-09 13:32:46 -05:00
Scott Lahteine
48761f2021
Patch delta endstop adjustment config
2016-10-09 13:32:45 -05:00
Josef Pavlik
28d41b48e3
delta endstop adjustment configurable
2016-10-09 13:09:34 -05:00
Scott Lahteine
ff6b23cb0f
Fix an issue with shifted LCD lines
2016-10-09 13:00:00 -05:00
Scott Lahteine
e4d2662d81
Use some macros in M48
2016-10-09 12:21:05 -05:00
Scott Lahteine
3752d9aca8
Fix timer comments
2016-10-09 12:11:00 -05:00
Sebastianv650
a448cedbc5
LIN_ADVANCE bug fix and optimization
...
.) long to int: Extruder stalls at 10kHz / 20kHz step limits with long.
.) Take the delta_adv_steps calculation out of the step_loops loop. Wasted calculation performance if done inside.
.) >> 2 replaced by 3: Is divide by 8. Reason: Timer 0 runs at 16/8=2MHz, Timer 1 at 16/64=0.25MHz. ==> 2/0.25=8.
2016-10-09 11:55:02 -05:00
esenapaj
b27080c1dd
Update Japanese translation
...
・Add new translation
2016-10-10 01:52:51 +09:00
esenapaj
0780146034
Move DAC section from inside of the changing filament section
2016-10-10 01:17:46 +09:00
Brian
9c0404eae4
Move platformio directories out of source tree
2016-10-08 13:45:26 -04:00
Scott Lahteine
a1b50f1102
Cleanup of code style
2016-10-07 15:57:24 -05:00
jaysonkelly
13c9dcc600
Add LCD menu for DAC
2016-10-07 15:13:03 -05:00
Scott Lahteine
00261cbfcb
Merge pull request #4933 from thinkyhead/rc_drop_pid_func_range
...
Squashed - Removal of PID functional range
2016-10-07 15:07:55 -05:00
Scott Lahteine
ee01def16d
Merge pull request #4955 from thinkyhead/rc_debug_pins
...
PINS_DEBUGGING and M43: Read pin states
2016-10-07 14:47:34 -05:00
Scott Lahteine
a0df34fd4c
Add PINS_DEBUGGING advanced config option
2016-10-07 14:20:13 -05:00
Scott Lahteine
e21bab5243
PINS_DEBUGGING and M43 Read Pins
2016-10-07 14:11:48 -05:00
Scott Lahteine
3c97fa6e29
Merge pull request #4963 from esenapaj/Fix-for-advance-algorithm
...
Move routine of direction signal of ADVANCE and LIN_ADVANCE from Stepper::isr() to Stepper::advance_isr()
2016-10-07 00:33:42 -05:00
Scott Lahteine
48e63c4730
Comment some globals
2016-10-06 22:06:33 -05:00
Scott Lahteine
9a6c66602f
Fix formatting of extrapolate debug output
2016-10-06 17:04:22 -05:00
Scott Lahteine
cd77eb5c40
Clear grid for bilinear G29
2016-10-06 17:00:53 -05:00
Scott Lahteine
53a0856f5c
Print Y as int in print_bed_level
2016-10-06 16:46:54 -05:00
esenapaj
f8df88f271
Move routine of direction signal of ADVANCE and LIN_ADVANCE from Stepper::isr() to Stepper::advance_isr()
2016-10-07 02:01:29 +09:00
Brian
357854a7ef
tweak variables;
2016-10-05 19:49:05 -04:00
Brian
48cf19151a
Improve M48 output; Add min, max, range, etc.
2016-10-05 16:09:39 -04:00
Scott Lahteine
c63cb45268
Fix thermal runaway timeout
2016-10-05 08:42:39 -05:00
Scott Lahteine
e6164d254d
Clean up GCode command short comments
2016-10-05 06:13:30 -05:00
Scott Lahteine
47bd142b29
Should marlinAnalogInputToDigitalPin use analogInputToDigitalPin?
2016-10-05 06:13:30 -05:00
Scott Lahteine
bd8520e61d
Label analog pins in a similar way
...
Some other pins formatting also
2016-10-05 06:13:30 -05:00
Scott Lahteine
0c0deb5194
Common pin_is_protected function
2016-10-05 04:41:27 -05:00
Scott Lahteine
49d77720d5
More support for 4th extruder or heater
2016-10-05 04:40:22 -05:00
Scott Lahteine
46839c222a
Comment and clean up some vars
2016-10-04 23:40:45 -05:00
Scott Lahteine
8910bb7c97
Fix buzzer conditional compile
2016-10-04 21:38:41 -05:00
Scott Lahteine
de7e798e6f
Replace single-char S_ECHOs with S_CHAR
2016-10-04 21:38:41 -05:00
Scott Lahteine
0e83f34174
Tweak debugging of probe_pt
2016-10-04 21:38:00 -05:00
Scott Lahteine
cc02f6edf8
Merge pull request #4943 from esenapaj/Small-update-of-language_kana_h
...
Small update of language_kana.h
2016-10-04 03:21:57 -05:00
Scott Lahteine
ca26011e3c
Merge pull request #4941 from MagoKimbra/rc_fix_M205
...
Add note for M205
2016-10-04 03:21:20 -05:00
Scott Lahteine
9485aa8f13
Include negative Z probe offset in clearance move
2016-10-03 16:18:04 -05:00
Scott Lahteine
5c1eb595e6
Fix for G2/G3 negative radius
...
As suggested in #4940
2016-10-03 14:48:44 -05:00
esenapaj
f09ae96f28
Small update of language_kana.h
2016-10-03 23:41:39 +09:00
MagoKimbra
7b37539fe7
Add note for M205
2016-10-03 08:54:15 +02:00
Scott Lahteine
d5f598cd82
Tweak probe debug, add newline
2016-10-02 17:35:40 -05:00
Scott Lahteine
c592ccb6f5
Patch max_jerk[Z] menu item
2016-10-02 10:12:47 -05:00
Scott Lahteine
d80a79eb77
Use right-shift instead of / 2, why not?
2016-10-02 07:01:40 -05:00
Rerouter
02fe9cf558
Removal of functional range constraint
...
Also lined up the >> 1 and / 2 mentioned earlier in the unconstrained I term issue,
2016-10-02 07:01:40 -05:00
Rerouter
5f5d87cad3
Update Configuration.h
2016-10-02 07:01:40 -05:00
Scott Lahteine
761593b74b
Cleanup some vars, use of min/max
2016-10-02 06:34:56 -05:00
Scott Lahteine
d19cfcfc1d
max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK
2016-10-02 06:34:56 -05:00
Scott Lahteine
e7dc174f30
More detailed debugging of G28 delta
2016-10-02 02:18:57 -05:00
Scott Lahteine
473f4a17a8
Merge pull request #4914 from Rerouter/PID-Unconstrained-Itemp
...
Pid unconstrained itemp
2016-10-01 06:58:07 -05:00
Scott Lahteine
bad8899ebc
Merge pull request #4900 from thinkyhead/rc_g38_changes
...
Cleanup of G38.2 / G38.3
2016-10-01 06:57:17 -05:00
Scott Lahteine
73ce3a61c7
Cleanup, comment zigzag
2016-10-01 05:21:52 -05:00
Scott Lahteine
0d538f3db6
Add to all configurations
2016-10-01 05:00:53 -05:00
Scott Lahteine
919fe3e4b8
Rename feature to G38_PROBE_TARGET
2016-10-01 05:00:53 -05:00
Scott Lahteine
a2864ab7fe
Patched up, cleaned up
2016-10-01 05:00:53 -05:00
Bob-the-Kuhn
2911aa7ffa
code changes to implement G38 commands
...
1) modified 3 code files
Marlin.h
Marlin_main.cpp
endstops.cpp
2) modified config files so I could test on my machine
Testing was done on an AzteegX3pro based machine.
The probe was hooked to the Z_MIN endstop.
My controller doesn't have a dedicated Z_PROBE input so I couldn't test
that functionality.
Verified that a large file (without any G38 commands) executed the same
before and after the changes.
Verified that the head moves as expected when G38.2 and G38.3 commands
are issued. Single & multiple axis moves were tested along with + and -
directions.
Code was added to the main ISR. In normal operation only one extra IF
statement is evaluated. I didn't notice any performance degradation
because of the added code.
The G38 commands are expected to be issued manually by the operator
during machine setup. The G38 commands wait until the machine is idle
before proceeding. That way the other commands are minimally impacted
by the extra ISR overhead when a G38 command is in the queue.
The G38 commands are very similar to the G28 commands except 1) only the
Z_PROBE is used and movement can be in the + or - direction.
See issue 4677 for a discussion on adding G38 commands to Marlin.
Feature request: add ability to use G38.2 command (CNC)
MarlinFirmware/Marlin#4677
2016-10-01 05:00:53 -05:00
Scott Lahteine
74d048e77e
Merge pull request #4927 from thinkyhead/rc_bltouch_noraise
...
Don't check Z_MAX on raise when the probe pwns the pin
2016-10-01 04:52:56 -05:00
Scott Lahteine
4afa293289
Say "BLTOUCH" in machine info report
2016-09-30 17:13:27 -05:00
Scott Lahteine
ed7d2694fc
Don't check Z_MAX on raise when the probe pwns the pin
2016-09-30 16:41:30 -05:00
Scott Lahteine
3bbdd48a4d
Merge pull request #4918 from thinkyhead/rc_abl_patchups
...
Fix up ABL - Add PROBE_Y_FIRST option. Arduino 1.6.8 required.
2016-09-29 15:29:01 -05:00
Scott Lahteine
fffc9fefa8
Apply changes to all configs
2016-09-29 02:17:33 -05:00
Scott Lahteine
587cb6c283
K8400 has 1xXY an 2xZ endstop plugs
2016-09-29 02:07:22 -05:00
Scott Lahteine
d234bc160e
Require Arduino 1.6.8 to compile
2016-09-29 02:00:27 -05:00
Scott Lahteine
2d2c9bdf92
Add PROBE_Y_FIRST option for probe order
2016-09-29 02:00:27 -05:00
Scott Lahteine
c8c57e59fc
Patch the end of G29 to sync plan position
2016-09-29 02:00:27 -05:00
Scott Lahteine
81b8c9f8ec
Add XY parameters to G29 for mesh dimensions
2016-09-29 02:00:27 -05:00
Scott Lahteine
56cf674150
M420 can now enable/disable ABL
2016-09-29 02:00:26 -05:00
Scott Lahteine
06790977c4
Use updated position methods
2016-09-29 01:31:05 -05:00
Scott Lahteine
e8f2604a6f
Patch print_bed_level numbering
2016-09-29 01:31:05 -05:00
Scott Lahteine
d066610514
Patch up bilinear_z_offset
2016-09-29 01:31:05 -05:00
Scott Lahteine
850e38d013
G30 will only disable bed leveling
2016-09-29 01:31:04 -05:00
Scott Lahteine
510ef5d14a
Standard function to turn bed leveling on/off
2016-09-29 01:27:37 -05:00
Scott Lahteine
ecf7cdde65
Augment planner/stepper getters/setters
2016-09-29 01:27:37 -05:00
Scott Lahteine
2febd8ec82
Double-touch debugging
2016-09-29 01:27:37 -05:00
Scott Lahteine
b331077c32
Use stepper.get_axis_position_degrees
2016-09-29 01:27:37 -05:00
Scott Lahteine
0d9efb24f3
Fix up bilinear_z_offset
2016-09-29 01:26:22 -05:00
jaysonkelly
3b3d282f8e
Adjusted values for Rigidboard Configuration
...
Rigidboard differs a little in configuration from the PrinterBoardRevF we modeled the code after.
2016-09-28 14:14:04 -05:00
Scott Lahteine
850259bb25
Watch bed temp also for Control menu item
2016-09-28 14:14:04 -05:00
esenapaj
92c03a44a9
Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc.
...
About Configuration.h:
・Fix the PR #4899 (ABL: Enable by type. Bilinear for all.)
Remove Duplicated contents
・Fix the PR #4305 (Custom boot screen feature improvement)
Revert from "during boot" to "during bootup" in all the example
Configuration.h
・Fix the PR #4207 (Clean up, simplify and generalize the Allen-key-probe
code.)
Resolve and relocate the duplicated definitions in Z_PROBE_ALLEN_KEY
section
・Follow-up the PR #4805 (Additional documentation of Configuration.h)
Add forgotten changes to all the example Configuration.h
Adjust spacing
About Configuration_adv.h:
Add missing description of SLOWDOWN for DELTA
Adjust spacing
2016-09-28 14:14:04 -05:00
Rerouter
50e5ee4de4
Update Configuration.h
2016-09-28 17:38:09 +10:00
Rerouter
1a2f1d4974
Update temperature.cpp
2016-09-28 17:36:53 +10:00
Rerouter
a765c98850
Removal of the constraints of the Iterm
2016-09-28 17:26:49 +10:00
Scott Lahteine
8b46eb3766
Fix bilinear interpolation
2016-09-27 03:18:49 -05:00
Scott Lahteine
5100bdac81
Improve Bilinear Grid
...
- Extrapolate properly for even numbered grid points
- Extrapolate using average, not median
- Improve bilinear grid report output
- Add debug output for bilinear extrapolation
- Add option to extrapolate from edge, not center
2016-09-27 00:03:19 -05:00
Scott Lahteine
a3e91ec65e
Add 'Q' option to G29 when debug leveling is on
2016-09-27 00:03:19 -05:00
Scott Lahteine
1fceda4fb0
Add leveling type and details to machine_info
2016-09-27 00:03:19 -05:00
Scott Lahteine
e0e0166075
Fix auto bed leveling - turn on after successful G29
2016-09-27 00:03:19 -05:00
Scott Lahteine
18e40de39c
Adjust final Z after bilinear G29
2016-09-26 00:22:22 -05:00
Scott Lahteine
ea0dbee3c9
Enable ABL by type, support bilinear on cartesian
2016-09-25 23:35:37 -05:00
Scott Lahteine
9cebbabd05
Merge pull request #4893 from thinkyhead/rc_stat_led_check
...
Define status LED pins without condition
2016-09-25 18:50:47 -05:00
Scott Lahteine
5fff8d148b
Clean up digital pots and microsteps
2016-09-25 11:16:22 -05:00
Scott Lahteine
570676d265
Include requirements in "Implemented Codes"
2016-09-25 07:50:33 -05:00
Scott Lahteine
cb48292338
Use fastio for literal pins
2016-09-25 06:33:38 -05:00
Scott Lahteine
07703d2bd6
Use _PIN suffix on some pins
2016-09-25 06:33:38 -05:00
Scott Lahteine
203e519bf4
Sanity check for status LED pins
2016-09-25 06:33:38 -05:00
Scott Lahteine
ba43277429
Always define status LED pins
2016-09-25 06:33:37 -05:00
Scott Lahteine
ad691022d7
Fix up spacing in A4JP pins
2016-09-25 06:33:37 -05:00
Scott Lahteine
fba0b67f7d
Rename status led pins
2016-09-25 06:33:37 -05:00
Scott Lahteine
9d86c07702
Clean up some fastio.h spacing
2016-09-25 06:33:37 -05:00
Scott Lahteine
ab84ed22ca
No such thing as G6 and G7 pins
2016-09-25 05:28:22 -05:00
Scott Lahteine
c2f13be750
Mightyboard Revision E
2016-09-25 05:28:04 -05:00
Scott Lahteine
041d127cd3
Match bltouch test in do_homing_move with new code
2016-09-24 23:58:08 -05:00
Scott Lahteine
16461900c2
Fix for HEATERS_PARALLEL
2016-09-24 05:34:40 -05:00
Scott Lahteine
1583d37edd
Comment on M851 case
2016-09-24 05:34:36 -05:00
Scott Lahteine
076f3a8284
unsigned char => uint8_t
2016-09-24 05:23:40 -05:00
Scott Lahteine
8935bed594
MIDDLE_DEAD_ZONE => MIDDLE_DEAD_ZONE_R
2016-09-24 05:18:36 -05:00
Scott Lahteine
6cf0952bf9
Merge pull request #4887 from thinkyhead/rc_autumn_fixups
...
Improve MINIMUM_STEPPER_PULSE
2016-09-24 03:23:42 -05:00
Scott Lahteine
8061f1fac9
Merge pull request #4888 from thinkyhead/fix_warnings_etc
...
Suppress warnings, fix nonlinear_z_offset
2016-09-24 03:22:49 -05:00
esenapaj
7bdc58a818
Suppress warnings, fix nonlinear_z_offset
2016-09-24 03:06:08 -05:00
Scott Lahteine
eabff30e75
Improve MINIMUM_STEPPER_PULSE
2016-09-24 02:23:43 -05:00
esenapaj
3ed8f8331c
Update Japanese translation
...
・Add new translation
2016-09-24 09:24:38 +09:00
Scott Lahteine
da1644313d
Merge pull request #4883 from esenapaj/Follow-up-the-PR-#4860
...
Follow-up the PR #4860 (Fix BLTOUCH string and SERVO_DELAY)
2016-09-23 16:39:37 -05:00
Scott Lahteine
903b8bb60c
No need for auto_bed_leveling_was_enabled
2016-09-23 16:38:22 -05:00
esenapaj
ee60225c07
Follow-up the PR #4860 (Fix BLTOUCH string and SERVO_DELAY)
2016-09-24 06:18:27 +09:00
Scott Lahteine
0951bffcc0
Sanity check homing bumps
2016-09-23 15:39:02 -05:00
Scott Lahteine
a9a21db39f
No homing bump if bump distance is 0 (or less)
2016-09-23 15:39:02 -05:00
Scott Lahteine
2b4da57ea7
Patch Z safe homing for probe Z homing
2016-09-23 15:39:02 -05:00
Scott Lahteine
c6dd539c84
Print error for M42 bad pin
2016-09-23 15:39:02 -05:00
Scott Lahteine
8b399610fb
Skip raw moves to current position
2016-09-23 15:39:02 -05:00
Scott Lahteine
22ece0081e
Pass array pointer to unapply_leveling
2016-09-23 15:39:01 -05:00
Scott Lahteine
cbc158eb62
Add a proper flag for ABL enabled
2016-09-23 15:39:01 -05:00
Scott Lahteine
666e944336
Init xProbe/yProbe for compiler
2016-09-23 15:39:01 -05:00
Scott Lahteine
2c52e6ecf4
Clean up G28 MBL code
2016-09-23 15:39:01 -05:00
Scott Lahteine
0bf1054bb2
Patch do_homing_move for SCARA
2016-09-23 15:39:00 -05:00
Scott Lahteine
6ad0da661c
Report position in G92
2016-09-23 15:39:00 -05:00
Scott Lahteine
199a7b5dd5
Tweak SCARA debugging
2016-09-23 15:39:00 -05:00
Scott Lahteine
865ad25781
Fix prepare_kinematic_move_to precision
2016-09-23 15:39:00 -05:00
Scott Lahteine
85e607153b
Improve kinematic optimization options
2016-09-23 03:03:15 -05:00
Scott Lahteine
2846531f0b
const argument in do_homing_move
2016-09-23 03:03:15 -05:00
Scott Lahteine
cc639d7d9c
Less indentation in Stepper::isr
2016-09-23 03:03:14 -05:00
Scott Lahteine
7dec8071b2
Always synchronize in Stepper::set_position
2016-09-23 03:03:14 -05:00
Scott Lahteine
c6142aa2a1
Minor cleanups in Marlin_main.cpp
2016-09-23 03:03:14 -05:00
Scott Lahteine
0427f3cc3b
Use memcpy/memset in planner
2016-09-23 03:03:14 -05:00
Scott Lahteine
6b9bf8e8fe
Add Planner::sync_from_steppers
...
Use to sync the planner after an interrupted move (when not overriding
the logical position).
2016-09-23 03:03:14 -05:00
Scott Lahteine
be11a8a938
Fix debug in Planner::buffer_line
2016-09-23 03:03:13 -05:00
Scott Lahteine
b211df818e
Make movement functions more available
2016-09-23 03:03:13 -05:00
Scott Lahteine
6335acbf5c
Patch bug in linear unapply_leveling
2016-09-23 03:03:13 -05:00
Scott Lahteine
e8d5073a90
Use probe clearance for bump when homing Z with probe
2016-09-22 15:41:28 -05:00
Scott Lahteine
dbe41245f1
Merge pull request #4821 from thinkyhead/rc_revert_to_raises
...
Z Raise/Clearance rather than Height
2016-09-22 15:30:07 -05:00
Scott Lahteine
747a2257dd
Only deploy/stow BLTOUCH on downward move
2016-09-22 15:26:19 -05:00
Scott Lahteine
e242946ac3
Patch G29 for linear leveling, reachable with probe
2016-09-22 15:26:19 -05:00
Scott Lahteine
b800eb0fed
Add probe option to position_is_reachable
2016-09-22 15:26:19 -05:00
Scott Lahteine
fafafcf9d1
Use unapply_leveling in set_current_from_steppers_for_axis
2016-09-22 15:26:18 -05:00
Scott Lahteine
e69d1e2879
Homing/probing feedrate, comments
2016-09-22 15:26:18 -05:00
Scott Lahteine
7d72ed688c
Revert motor_current_setting to constexpr
...
We should use `constexpr` wherever it makes sense, for its added benefits. See http://stackoverflow.com/questions/13346879/const-vs-constexpr-on-variables
2016-09-22 15:26:18 -05:00
Scott Lahteine
145d9005d1
Fix BLTOUCH string and SERVO_DELAY
2016-09-21 01:45:23 -05:00
Scott Lahteine
2b7cc27c37
Merge pull request #4840 from thinkyhead/rc_G2_G3_arc_r_method
...
Add support for G2/G3 with R parameter
2016-09-21 01:30:37 -05:00
Scott Lahteine
e0e10e0e45
Merge pull request #4859 from thinkyhead/rc_kinematic_and_scara
...
Kinematic and SCARA patches
2016-09-21 01:21:49 -05:00
Scott Lahteine
31f03c838a
Only deploy/stow BLTouch for Z axis
2016-09-21 00:54:54 -05:00
Scott Lahteine
3913e04ac7
Add Delta kinematic optimization options
2016-09-20 18:48:06 -05:00
Scott Lahteine
8e31640229
Optimize prepare_kinematic_move_to
2016-09-20 18:48:06 -05:00
Scott Lahteine
fd9b8ae4d4
Use position_is_reachable in G29, M48
2016-09-20 18:48:06 -05:00
Scott Lahteine
7194e4434f
SCARA support in position_is_reachable
2016-09-20 18:48:06 -05:00
Scott Lahteine
1c5f9821c4
SCARA support in homeaxis
2016-09-20 18:48:05 -05:00
Scott Lahteine
92b4459f6c
Simpler G92 for SCARA
2016-09-20 18:48:05 -05:00
Scott Lahteine
46cc2e3f6a
Fix get_cartesian_from_steppers
2016-09-20 18:31:36 -05:00
Scott Lahteine
435c3ed404
Patch SCARA_move_to_cal for coordinate space
2016-09-20 18:31:36 -05:00
Scott Lahteine
5efb12e889
Simpler report_current_position for SCARA
2016-09-20 18:31:36 -05:00
Scott Lahteine
83fc5e1540
No line_to_* functions with IS_KINEMATIC
2016-09-20 18:31:36 -05:00
Scott Lahteine
59d39d7655
G0 direct move for SCARA
2016-09-20 18:31:36 -05:00
Scott Lahteine
ad9d6870ed
SCARA support in do_blocking_move_to
2016-09-20 18:31:36 -05:00
Scott Lahteine
8542ebcecd
prepare_move_to_destination_raw => prepare_uninterpolated_move_to_destination
2016-09-20 18:31:36 -05:00
Scott Lahteine
f900f97611
Update sw endstops in set_axis_is_at_home
2016-09-20 18:31:36 -05:00
Scott Lahteine
0d43cef1de
M206 for MORGAN_SCARA
2016-09-20 18:31:36 -05:00
Scott Lahteine
e94cb7a380
MORGAN_SCARA kinematics
2016-09-20 18:31:36 -05:00
Scott Lahteine
890bade2fa
Additions, mods to SCARA config
2016-09-20 18:31:36 -05:00
Scott Lahteine
01f1028510
Try on "CLEARANCE" for size
2016-09-20 18:29:49 -05:00
Scott Lahteine
0e7d638a7a
Revert to Probe Raise rather than Probe Height
2016-09-20 18:29:49 -05:00
Scott Lahteine
51e42a2d77
Adjust BLTouch probe behavior
...
Addressing #4855
- Have the pin deploy only immediately before probing
- Have the pin retract immediately after every probe
2016-09-20 16:20:36 -05:00
Scott Lahteine
13523cbf29
Fix and extend BLTouch support
2016-09-20 16:20:36 -05:00
Scott Lahteine
5cbed13f41
'constexpr' => 'const' for PWM_MOTOR_CURRENT
2016-09-20 15:57:48 -05:00
Scott Lahteine
7ae351c92f
Merge pull request #4842 from thinkyhead/rc_DISABLE_Z_MIN_PROBE_ENDSTOP_whassup
...
Drop DISABLE_Z_MIN_PROBE_ENDSTOP, clean up probe config
2016-09-20 12:16:51 -05:00
Scott Lahteine
ba94c89e21
Merge pull request #4852 from esenapaj/Fix-for-advance-extrusion-algorithms
...
Fix for advance extrusion algorithms
2016-09-20 11:33:14 -05:00
esenapaj
954563d603
Adjust spacing
2016-09-20 19:35:44 +09:00
esenapaj
7e9576dc5b
Extend the e_steps[] from int to long for allowing more than 32,767 E steps
...
Probably needed for long straight lines when using high microstepping
2016-09-20 19:35:44 +09:00
esenapaj
b04ed8f9c3
Fix inverted stepper signal of ADVANCED and LIN_ADVANCED
2016-09-20 19:35:44 +09:00
esenapaj
8692748ecd
Fix broken direction signal of ADVANCED and LIN_ADVANCED
...
Remove a setting proccess of E direction in advance_isr()
2016-09-20 19:35:44 +09:00
Scott Lahteine
e9ce42353e
Patch G29 for 3-point leveling
2016-09-20 04:46:41 -05:00
Scott Lahteine
c2744d8a8b
Add support for G2/G3 with R parameter
2016-09-19 00:35:09 -05:00
Scott Lahteine
e05af606a8
Clean up probe config options
2016-09-19 00:26:16 -05:00
Scott Lahteine
153e240cdd
Probe conditionals to Conditionals_LCD.h
2016-09-19 00:25:53 -05:00
Scott Lahteine
ff38a3c3b1
Use SD Detect Pin 53 for 3DRAG, K8200, and K8400
...
See #4316
2016-09-18 23:46:09 -05:00
Scott Lahteine
f38a33a5d8
Add handling of BLTouch error state
2016-09-18 22:00:32 -05:00
Scott Lahteine
c4dcfa254e
Allow override of Z_ENDSTOP_SERVO_NR with BLTOUCH
2016-09-18 22:00:32 -05:00
Scott Lahteine
7d9ebda478
Remove redundant servo probe sanity check
2016-09-18 21:46:18 -05:00
Scott Lahteine
f0beae7641
Fix stupid, stupid, stupid oversight in G29 update
...
Mea culpa!
2016-09-18 16:24:47 -05:00
Scott Lahteine
77639672d7
Move NONLINEAR bed leveling to planner
...
This is in advance of moving non-linear bed leveling to the planner
class.
2016-09-18 13:50:38 -05:00
Scott Lahteine
9429c7db89
Use ABC indices in delta[]
2016-09-18 13:50:38 -05:00
Scott Lahteine
5f2f991192
Use 'logical' rather than 'target' or 'cartesian'
2016-09-18 13:50:38 -05:00
Scott Lahteine
40d3e854f6
Remove redundant extern delta[]
2016-09-18 13:39:47 -05:00
Scott Lahteine
2ebfbc4c8d
Merge pull request #4836 from thinkyhead/rc_some_comments
...
Some comments, const args, debug output tweaks
2016-09-18 13:38:07 -05:00
Scott Lahteine
e5505e3b33
Allow non-square leveling grid
2016-09-18 13:11:20 -05:00
Scott Lahteine
2fc9ad6657
Use const ref args in probe_pt
2016-09-18 12:58:43 -05:00
Scott Lahteine
2c2688d7ad
Adjust comments, spacing
2016-09-18 12:58:42 -05:00
Scott Lahteine
b9d19b0008
Tweak extrapolate_one_point
2016-09-18 12:58:42 -05:00
Scott Lahteine
3c0b591935
Fix nozzle position description
2016-09-18 12:58:42 -05:00
Scott Lahteine
18d8dd4c0f
set_current_from_steppers_for_axis const arg
2016-09-18 12:58:42 -05:00
Scott Lahteine
edfaf1c582
Stepper::report_positions patch
2016-09-18 12:58:42 -05:00
Scott Lahteine
d1f4c3d73b
Patch sync_plan_position comment
2016-09-18 12:58:41 -05:00
Scott Lahteine
0c25af30d4
Document homeaxis
2016-09-18 12:58:41 -05:00
Scott Lahteine
e7882e45e3
Document set_axis_is_at_home
2016-09-18 12:58:40 -05:00
Scott Lahteine
fef959c31a
Merge pull request #4834 from thinkyhead/rc_code_bool
...
Standardize code_value_bool
2016-09-18 12:44:20 -05:00
Scott Lahteine
07ac9a1152
Merge pull request #4822 from blubbfish/patch-3
...
Tweak some german language strings
2016-09-18 11:38:22 -05:00
Scott Lahteine
661fe09ce7
Standardize code_value_bool
2016-09-18 11:32:32 -05:00
Scott Lahteine
20e5140e75
Merge pull request #4833 from thinkyhead/rc_no_scara_axis_scaling
...
Remove SCARA axis_scaling
2016-09-18 11:31:50 -05:00
Scott Lahteine
a501f430eb
Enable M0/M1 with Emergency Parser
2016-09-18 11:14:10 -05:00
Philip Schell
cd8b22b527
Tweak some german language strings
...
Change some string to get a better wording in german
2016-09-16 22:29:39 +02:00
Scott Lahteine
83a41c7ceb
Remove SCARA axis_scaling
2016-09-16 15:21:18 -05:00
Scott Lahteine
d41eeb62af
Merge pull request #4781 from thinkyhead/rc_final_z_correction
...
Use simplified Z correction in G29 when possible
2016-09-16 15:14:19 -05:00
Scott Lahteine
502150046c
Merge pull request #4805 from thinkyhead/rc_config_adjustment
...
Additional documentation of Configuration.h
2016-09-16 15:13:20 -05:00
Scott Lahteine
a1812b55f6
Space out array values
2016-09-16 14:41:05 -05:00
Scott Lahteine
d4599fd8ed
Comment patches to Configuration.h
2016-09-16 14:41:05 -05:00
Scott Lahteine
723e983073
Default EXTRUDE_MAXLENGTH to 200mm
2016-09-16 14:41:04 -05:00
Scott Lahteine
b08bd84f8e
Merge pull request #4806 from blubbfish/patch-2
...
Update language_de.h
2016-09-16 14:39:20 -05:00
darrelhunt
7b8bfa4358
Update pins_TEENSYLU.h
2016-09-16 11:26:37 -07:00
darrelhunt
829c8592f2
Update pins_TEENSY2.h
2016-09-16 11:26:09 -07:00
darrelhunt
e0aee20327
Update pins_SAV_MKI.h
2016-09-16 11:25:42 -07:00
darrelhunt
88d3fc0bcf
Update pins_PRINTRBOARD.h
2016-09-16 11:25:14 -07:00
darrelhunt
4277221abb
Update pins_BRAINWAVE_PRO.h
2016-09-16 11:24:32 -07:00
darrelhunt
b8ecbe9116
Update pins_BRAINWAVE.h
2016-09-16 11:23:52 -07:00
darrelhunt
60f757077e
Update pins_5DPRINT.h
2016-09-16 11:22:52 -07:00
Silvio Didonna
ff2b2d5939
Added missing translations
2016-09-16 01:17:58 +02:00
Philip Schell
2b11c3274c
Update language_de.h
2016-09-15 15:16:11 +02:00
Philip Schell
54e6d12382
Update language_de.h
...
@MarlinFirmware/language-team updated german languagefile to the latest english version
2016-09-14 14:17:21 +02:00
Scott Lahteine
57564ae576
Use last probe point to correct Z when possible
2016-09-14 02:03:43 -05:00
Scott Lahteine
e40646de42
Merge pull request #4803 from thinkyhead/rc_lcd_button_fix
...
Clear LCD button state, apply timer to all
2016-09-13 18:03:39 -05:00
Scott Lahteine
29f224594c
Fix some regressive typos in G29
2016-09-13 17:31:02 -05:00
Scott Lahteine
5ecc7d9f25
Clear LCD button state, apply timer to all
...
Addressing #3007
2016-09-13 16:10:27 -05:00
Scott Lahteine
9b0931ef74
Apply fixed EXTRUDER_RUNOUT_PREVENT
2016-09-13 03:33:04 -05:00
Scott Lahteine
b1a60e8954
Reformat, rearrange, tweak, and document
...
- Add comments to several functions
- Add an option to use Fast SQRT for Delta IK
- Group related functions together
- Outdent some leveling-related functions
2016-09-13 03:33:04 -05:00
Scott Lahteine
61284cbd8c
Various code style adjustments
2016-09-13 03:33:04 -05:00
Scott Lahteine
788a16fc46
Clean up serial out code
2016-09-13 03:33:03 -05:00
Scott Lahteine
0e38bea79d
Shrink 3-point leveling code
2016-09-13 03:33:03 -05:00
Scott Lahteine
4f75ce6957
Unify reset_bed_level for linear/non-linear
2016-09-13 03:33:03 -05:00
Scott Lahteine
41d8149bce
Sanity check for more than 1 controller
2016-09-13 03:33:02 -05:00
Scott Lahteine
40785ce8ac
Use count method for kinematic sanity check
2016-09-13 03:33:02 -05:00
Scott Lahteine
3236762e07
Clean up sanity check for LCD_PROGRESS_BAR
2016-09-13 03:33:02 -05:00
Scott Lahteine
a9ed23225f
bed_level => bed_level_grid
2016-09-13 03:33:02 -05:00
Scott Lahteine
82be65065c
Fix up untilted_stepper_position and set_current_from_steppers_for_axis
2016-09-13 03:33:01 -05:00
Scott Lahteine
d65f5d816f
Patch to fix kinematics
2016-09-13 03:33:01 -05:00
Scott Lahteine
e529c6407e
Rename set_cartesian_from_steppers, cartesian_position
2016-09-13 03:33:01 -05:00
Scott Lahteine
c109399bf6
Fix planner leveling and rename arguments
...
Use lx, ly, lz for “logical” positions
2016-09-13 03:33:01 -05:00
Scott Lahteine
d4f21af6b3
sync_plan_position_delta => sync_plan_position_kinematic
2016-09-13 03:33:01 -05:00
Scott Lahteine
acd1b6e9c0
Rename delta_grid spacing for general nonlinear
2016-09-13 03:33:00 -05:00
Scott Lahteine
c5fa70809b
Implement M0/M1 for EMERGENCY_PARSER
2016-09-13 03:33:00 -05:00
Scott Lahteine
786d1afb72
Add position_is_reachable, use in home_z_safely
2016-09-13 03:33:00 -05:00
Scott Lahteine
b4034915f8
Move z safe homing to its own function
2016-09-13 03:33:00 -05:00
Scott Lahteine
c84b14c77a
Move delta homing to its own function
2016-09-13 03:32:59 -05:00
Scott Lahteine
f9a192c7e3
Move setup() and loop() to the end
2016-09-13 03:32:59 -05:00
Scott Lahteine
8ff338c2b9
Patch stepper.h for SCARA
2016-09-13 03:32:59 -05:00
Scott Lahteine
74d7f5e57b
Patch SCARA example config
2016-09-13 03:32:59 -05:00
Scott Lahteine
6ab54c60b1
Add conditionals for kinematics, leveling
2016-09-13 03:32:59 -05:00
Scott Lahteine
21514568fd
Add enum for ALL_AXES
2016-09-13 03:32:58 -05:00
Scott Lahteine
413b61e64a
Add HYPOT2 and float comparison macros
2016-09-13 03:32:58 -05:00
Scott Lahteine
a6f6ed352b
Fix comment on FILAMENT_RUNOUT_SENSOR
2016-09-13 02:14:34 -05:00
Scott Lahteine
48e14d049a
Merge pull request #4710 from thinkyhead/rc_fix_leveling_maths
...
Bed leveling that accounts for home XYZ
2016-09-10 15:47:39 -05:00
Scott Lahteine
416821a71c
Merge pull request #4765 from thinkyhead/rc_endstop_direction
...
Sanitycheck endstop plugs based on homing direction
2016-09-10 14:49:50 -05:00
Scott Lahteine
9248cfb0ad
Bed leveling that accounts for home XYZ
2016-09-10 13:47:21 -05:00
Scott Lahteine
6ac9d895ca
Tweak Filament Width variables
2016-09-10 13:29:25 -05:00
Scott Lahteine
68ba45572e
Don't say "heating complete" unless done
2016-09-10 13:29:25 -05:00
Scott Lahteine
2bfc6fe1b0
Move XYZ constants closer to the top
2016-09-10 13:25:44 -05:00
Scott Lahteine
12b94e419f
Sanitycheck endstop plugs based on homing direction
2016-09-08 13:56:32 -05:00
Scott Lahteine
29c4f67a29
Additional path - followup to #4743
2016-09-07 15:08:12 -05:00
Robert Bartl
494d5770b8
makefile fix for arduino 1.6.9 unzipped
2016-09-03 19:45:27 -05:00
Scott Lahteine
6f71bd7372
Merge pull request #4754 from thinkyhead/rc_mixing_regression
...
Unify counter_m and counter_M
2016-09-02 12:27:43 -05:00
Scott Lahteine
9bf78ef465
Fix capitalization of counter_m
2016-09-02 11:31:45 -05:00
Scott Lahteine
42b5616327
Try bool for direction instead of long
2016-09-02 11:28:48 -05:00
Scott Lahteine
cbe9ab902c
Merge pull request #4747 from thinkyhead/rc_sd_show_percent
...
Option to show SD percent on Graphical LCD
2016-09-02 07:44:42 -05:00
Scott Lahteine
f20b2b21eb
Optimize LCD string/char printing
2016-09-02 06:41:24 -05:00
Scott Lahteine
3b2f7ba225
Merge pull request #4748 from thinkyhead/rc_sd_print_timer
...
Patch duration_t toDigital method
2016-09-02 04:41:11 -05:00
Kai
445d8215e4
Option to show SD percent on Graphical LCD
2016-09-02 02:17:36 -05:00
Scott Lahteine
d07a913f21
Tweak to stepper advance e_steps update
2016-09-02 02:06:17 -05:00
Scott Lahteine
aaef7c6b89
Fix a misspelling of minimum
2016-09-02 01:42:38 -05:00
Scott Lahteine
ad659b5f91
Merge pull request #4725 from thinkyhead/rc_log_machine_info
...
Log machine info in G28 and G29
2016-09-01 23:58:59 -05:00
Scott Lahteine
c6859a1e54
Handle hours >= 100
2016-09-01 23:54:48 -05:00
Kai
9f706a9635
Patch duration_t toDigital method
2016-09-01 23:34:15 -05:00
Scott Lahteine
c3caa42630
Merge pull request #4738 from thinkyhead/rc_ensure_floats
...
Optimize stepper ISRs, plus cleanup, shorthand
2016-09-01 14:36:22 -05:00
Scott Lahteine
426f662586
Apply MINIMUM_STEPPER_PULSE in stepper advance_isr
2016-08-30 14:31:48 -05:00
Scott Lahteine
8c7ee4599e
Optimize stepper advance_isr
2016-08-30 14:31:48 -05:00
Scott Lahteine
9725bcd099
Minor "optimizations" in stepper ISR
2016-08-30 14:21:43 -05:00
Scott Lahteine
4ec3d1ea58
Add some commentary to stepper ISR
2016-08-30 14:21:15 -05:00
Scott Lahteine
d9bcc7bb45
Set a bool when a stepper block is done
2016-08-30 14:20:48 -05:00
Scott Lahteine
08f717e5f7
Use bit-size typedefs for some stepper vars
2016-08-30 14:19:49 -05:00
Scott Lahteine
d554c1dda8
Clean up planner kernel pass methods
2016-08-30 14:16:13 -05:00
Scott Lahteine
b2e5ec85d7
Add [XYZ]_CENTER conditionals
2016-08-30 14:15:41 -05:00
Scott Lahteine
7e20448a2d
Add HOMING_Z_WITH_PROBE conditional
2016-08-30 13:29:26 -05:00
Scott Lahteine
0e4107da34
Minor cleanup of homeaxis, etc.
2016-08-30 13:29:26 -05:00
Scott Lahteine
f1201e11c7
Improve the Jerk description
2016-08-29 12:39:21 -05:00
Scott Lahteine
3f038bef00
Heading for movement settings
2016-08-29 02:01:34 -05:00
Scott Lahteine
fd2269f489
Log machine info in G28 and G29
2016-08-28 20:48:28 -05:00
Scott Lahteine
6eaf4f4909
Fix spacing of debug output in homeaxis
2016-08-28 19:43:33 -05:00
Scott Lahteine
1e6d1c39ea
Improve verbiage of dropsegments sanity error
2016-08-28 19:40:32 -05:00
Scott Lahteine
0729a8f08d
Use the probe travel height for pre-probe move
...
Instead of using the home_bump for Z to move close to the bed before doing a slow probe, use the probe travel height.
2016-08-28 19:13:08 -05:00
Scott Lahteine
dd94d0b9d5
Fix bed probing bug without PROBE_DOUBLE_TOUCH
...
If `PROBE_DOUBLE_TOUCH` wasn't enabled, the probe move could be way too short! See #4701 for example.
2016-08-28 19:00:25 -05:00
Scott Lahteine
35a0c46f16
Tweak debug output for probe in G29
2016-08-28 18:44:44 -05:00
Scott Lahteine
a82a89bc58
Merge pull request #4722 from thinkyhead/rc_minimum_stepper_pulse
...
MINIMUM_STEPPER_PULSE option
2016-08-28 10:03:32 -05:00
Scott Lahteine
a2572d2854
Fix Danish encoding and an error message
2016-08-28 09:51:06 -05:00
Scott Lahteine
759234af60
MINIMUM_STEPPER_PULSE option
2016-08-27 23:58:40 -05:00
Scott Lahteine
2cb63f0bf7
Merge pull request #4719 from thinkyhead/rc_delta_homing_patch
...
Marlin patches for homing, esp. Delta
2016-08-27 20:46:50 -05:00
Scott Lahteine
8241cf9901
Merge pull request #4720 from thinkyhead/rc_allow_stepper_omission
...
Patch stepper.cpp to allow omitting steppers
2016-08-27 20:36:22 -05:00
Scott Lahteine
7e893f4309
Merge pull request #4721 from thinkyhead/rc_temperature_isr_comments
...
Rc temperature isr comments
2016-08-27 20:36:03 -05:00
Scott Lahteine
73d86098b7
Marlin patches for homing, esp. Delta
2016-08-27 20:32:05 -05:00
Scott Lahteine
338bc768b1
Merge pull request #4717 from thinkyhead/rc_log_the_probe
...
Debug logging of nozzle type and offsets
2016-08-27 20:24:19 -05:00
Scott Lahteine
fae92e3f3c
Merge pull request #4718 from thinkyhead/rc_twibus_patch_20160827
...
TWIBus patch for proper use of Wire.requestFrom
2016-08-27 20:22:53 -05:00
Scott Lahteine
a485a19052
Added optional planner logging
2016-08-27 20:12:22 -05:00
Scott Lahteine
e9bfca5870
Additional comments for Temperature::isr
2016-08-27 20:12:22 -05:00
Scott Lahteine
a255945f29
Add DEBUG_ALL enum
2016-08-27 20:12:22 -05:00
Scott Lahteine
a28e15399f
Patch stepper.cpp to allow omitting steppers
2016-08-27 20:11:17 -05:00
Scott Lahteine
2b226bc5c2
TWIBus patch for proper use of Wire.requestFrom
2016-08-27 20:09:28 -05:00
Scott Lahteine
d641344d3a
Remove redundant probe offset in homing
2016-08-27 19:58:56 -05:00
Scott Lahteine
fb19a3cdec
Merge pull request #4649 from thinkyhead/rc_boelle_danish_update
...
Danish update (18 Aug 2016)
2016-08-27 19:06:05 -05:00
Scott Lahteine
00638131e5
Debug logging of nozzle type and offsets
2016-08-27 15:21:01 -05:00
Scott Lahteine
8e9ac72191
Merge pull request #4709 from thinkyhead/rc_log_the_reason
...
Log whether homing with probe or endstop
2016-08-26 17:05:55 -05:00
Scott Lahteine
991a34aff2
Log whether homing with probe or endstop
2016-08-26 15:50:10 -05:00
Scott Lahteine
3b93b79f5c
Merge pull request #4703 from bgort/RCBugFix
...
Add note suggesting RAMBo users use the RAMBo board type or platformio environment
2016-08-26 14:53:56 -05:00
Scott Lahteine
00cdb15cec
Move invariant LCD strings to language.h
2016-08-26 02:48:57 -05:00
Bo Herrmannsen
d2ae5b00d9
Danish up to date (18 Aug 2016)
2016-08-26 02:48:57 -05:00
Scott Lahteine
e78274a7f4
Consistent order/formatting of pins files
2016-08-25 20:59:45 -05:00
Scott Lahteine
11e9530111
Properly handle probe pin for BQ printers
2016-08-25 20:59:44 -05:00
Scott Lahteine
1968983f35
Move PROBE_SELECTED to an earlier point
2016-08-25 20:59:44 -05:00
Brian
2fae32f35f
Add note suggesting RAMBo users use the RAMBo board type or platformio environment;
...
Add note that Viki 2.0 wiring diagram v1.2 has a mistake in it;
2016-08-25 15:05:29 -04:00
esenapaj
1749a7fae3
Suppress warning
2016-08-24 00:18:06 +09:00
Scott Lahteine
d07d85ac9f
Ensure probe points at the delta edge are kept
2016-08-23 05:09:56 -05:00
AnHardt
7e36b76af2
Repair MarlinSerial with TX-buffer
...
These '{' are important to avoid the redefinition of `unsigned char _sreg = SREG;`
at the same level.
Used in
```
#define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli();
```
2016-08-22 23:40:09 +02:00
Gege2B
1e65f1a1d8
Update french language
2016-08-22 12:46:58 -05:00
Scott Lahteine
ab59280075
MIN_SEGMENTS_FOR_MOVE => MIN_STEPS_PER_SEGMENT
...
Follow-up to #4666
2016-08-21 08:56:03 -05:00
Scott Lahteine
27b80b1dd1
Merge pull request #4667 from thinkyhead/rc_M211_sw_endstop_switch
...
M211: Enable/Disable Software Endstops
2016-08-21 06:44:00 -05:00
Scott Lahteine
14a03727e1
Tweak serialprintPGM
2016-08-21 00:10:09 -05:00
Scott Lahteine
2f223b8c79
Use ABC and XYZ for "3"
2016-08-21 00:10:08 -05:00
Scott Lahteine
4cd1ad8f28
Adjustments to M209, G28, M605
2016-08-21 00:10:08 -05:00
Scott Lahteine
e354cf5884
Apply sw_endstops_enabled to manual move
2016-08-21 00:10:08 -05:00
Scott Lahteine
280534c06f
Add M211: Enable/Disable Software Endstops
2016-08-21 00:10:08 -05:00
Scott Lahteine
01d4703429
PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION
...
Also improve the documentation of this and related options, and set
EXTRUDE_MINTEMP to 170 everywhere.
2016-08-20 23:35:27 -05:00
Scott Lahteine
a1f6cf1e5d
Merge pull request #4665 from thinkyhead/rc_lcd_not_ultipanel
...
Clean up ultralcd code, dependencies on ULTIPANEL
2016-08-20 22:43:17 -05:00
Scott Lahteine
1a255afa36
Merge pull request #4666 from thinkyhead/rc_dropsegments_adj
...
dropsegments => MIN_SEGMENTS_FOR_MOVE
2016-08-20 22:42:16 -05:00
Scott Lahteine
374f8d2014
dropsegments => MIN_SEGMENTS_FOR_MOVE
2016-08-20 18:52:15 -05:00
Scott Lahteine
76c3f326ff
Clean up DOGM code, comments
2016-08-20 18:33:12 -05:00
Scott Lahteine
71319adbb8
Wrap ULTIPANEL-dependent code
2016-08-20 18:33:11 -05:00
Scott Lahteine
305913545e
Move number-to-string function to utility.*
2016-08-20 18:33:11 -05:00
Scott Lahteine
394c80c87b
Merge pull request #4655 from thinkyhead/rc_serial_static
...
Optimize, reduce size of MarlinSerial
2016-08-20 15:51:57 -05:00
MagoKimbra
28d1e5a946
Fix_Zig_Zag
2016-08-20 11:28:08 +02:00
Scott Lahteine
14395a1a96
Optimize, reduce size of MarlinSerial
2016-08-19 16:53:20 -05:00
Scott Lahteine
4d4c00d69c
Merge pull request #4651 from thinkyhead/rc_homing_vs_leveling_z
...
Improvements to homing / leveling
2016-08-19 15:45:49 -05:00
Brian Gortney
8fae3e1f9f
Add Rambo support/env to platformio.ini; properly maps extended pins
2016-08-19 07:11:23 -04:00
Scott Lahteine
12d72363cb
Do Delta radius check without sqrt
2016-08-19 05:05:48 -05:00
Scott Lahteine
044f800be9
Use SERIAL_PROTOCOLLNPGM in G28
2016-08-19 04:45:33 -05:00
Scott Lahteine
d309a9647d
Include probe offset for moving "close to the bed"
2016-08-19 04:45:33 -05:00
Scott Lahteine
35a08eeaeb
Use Z_HOME_DIR over axis_home_dir where we can
2016-08-19 04:45:32 -05:00
Scott Lahteine
99b22d5785
Default AUTO_BED_LEVELING_GRID_POINTS to 3
2016-08-19 04:45:32 -05:00
Scott Lahteine
9b1f3f7d12
Sanity-check DELTA + AUTO_BED_LEVELING_GRID_POINTS
2016-08-19 04:45:32 -05:00
Scott Lahteine
733453569b
Merge pull request #4650 from thinkyhead/rc_percent_is_percent
...
extruder_multiplier => flow_percentage
2016-08-19 04:38:18 -05:00
Scott Lahteine
55355a4fb8
Make probed points more symmetrical
2016-08-19 04:32:03 -05:00
Scott Lahteine
1f776f6034
Tweak some code comments
2016-08-19 04:32:02 -05:00
Scott Lahteine
748228cf40
Use named indices for delta_grid_spacing
2016-08-19 04:32:02 -05:00
Scott Lahteine
ead333e7da
line_to_axis_pos => do_homing_move
2016-08-19 04:32:02 -05:00
Scott Lahteine
7a4ccd7967
Add do_probe_move with Z fixes
2016-08-19 04:32:02 -05:00
Scott Lahteine
a1bad589c9
Augment debug/homing logging
2016-08-19 04:32:02 -05:00
Scott Lahteine
41b5c48129
Update software endstops if EEPROM is loaded
2016-08-19 04:32:01 -05:00
Scott Lahteine
628dcbc764
extruder_multiplier => flow_percentage
2016-08-18 22:13:47 -05:00
Jason Westervelt
d222ee4de2
Update language_ru.h
...
Updated missing translations. Caught up on change to MSG_HOME.
2016-08-17 13:55:44 -07:00
Scott Lahteine
d63b8e2b2b
Additional details for I2C_SLAVE_ADDRESS
2016-08-15 19:27:53 -07:00
Scott Lahteine
7427290d3a
Merge pull request #4634 from thinkyhead/rc_lang_disp_char
...
Set language display charset in language.h
2016-08-15 19:25:56 -07:00
Scott Lahteine
aa30550b21
Keep SIMULATE_ROMFONT only language.h
2016-08-15 19:11:31 -07:00
Scott Lahteine
cec61c350d
Set language display charset in language.h
2016-08-15 19:01:12 -07:00
Scott Lahteine
165d7abb1b
Merge pull request #4625 from thinkyhead/rc_i2c_request_capture_flush
...
Add request, capture, flush to TWIBus
2016-08-15 18:15:43 -07:00
RicardoGA
507784b846
Fix Messages length
2016-08-15 10:30:51 -05:00
Scott Lahteine
bd928a69ec
Add request, capture, flush to TWIBus
2016-08-15 00:04:20 -07:00
RicardoGA
7b7f319ed5
Update Spanish Lenguage
...
Adds missing messages
2016-08-14 23:30:43 -05:00
Scott Lahteine
132322e4d9
Fix #4614 : currentScreen only defined with ULTIPANEL
2016-08-14 00:29:46 -07:00
Scott Lahteine
dcd26b0403
Merge pull request #4621 from thinkyhead/rc_fan_set_output
...
Init PWM-able AUTO_FAN pins with SET_OUTPUT
2016-08-13 21:22:27 -07:00
Scott Lahteine
79ba983782
Allow reply() to use const string with no warning
2016-08-13 21:05:44 -07:00
Scott Lahteine
3a0a94b21a
Always init configured fan pins
2016-08-13 20:38:40 -07:00
Scott Lahteine
c63003ed3e
Use matching auto-fan flags
2016-08-13 20:38:40 -07:00
Scott Lahteine
3475fd7b0f
Init PWM-able auto fan pins with SET_OUTPUT
2016-08-13 20:38:40 -07:00
Scott Lahteine
abf9696db1
Loop fan-pins based on array size
2016-08-13 20:05:32 -07:00
Scott Lahteine
e88575c8ec
Init next_auto_fan_check_ms to zero
2016-08-13 20:05:32 -07:00
Scott Lahteine
7272ec5608
Update HAS_FAN flags for 4 auto fans
2016-08-13 20:05:32 -07:00
Scott Lahteine
7b21811a9a
Flags for matching auto-fans
2016-08-13 20:05:32 -07:00
Scott Lahteine
97e0aed304
Further refinements of TWIBus
2016-08-13 18:32:41 -07:00
Scott Lahteine
38fa1b1939
Merge pull request #4196 from cimbalo/Platformio_support
...
Add working PlatformIO support
2016-08-12 17:32:09 -07:00
Scott Lahteine
d7edc039af
Merge pull request #4605 from thinkyhead/rc_3drag_fan_is_8
...
Fixup 3DRAG pins based on updated RAMPS pins
2016-08-12 17:30:27 -07:00
Silvio
923388e0c7
Fix acceleration and feedrate following bq/Marlin
2016-08-12 15:42:20 +02:00
Scott Lahteine
405afec393
Include decimeters in filamentUsed display
2016-08-12 05:16:43 -07:00
Scott Lahteine
fef0e8ba86
Merge pull request #4610 from thinkyhead/rc_sd_pause_and_stop
...
Fix stopSDPrint so it works when paused
2016-08-12 04:09:22 -07:00
Scott Lahteine
192ac2dfd7
Squish some CardReader code
2016-08-12 03:32:42 -07:00
Scott Lahteine
61932b859e
Fix bug in CardReader::stopSDPrint
...
If the SD print is paused, it cannot be stopped
2016-08-12 03:21:10 -07:00
Scott Lahteine
9e5d5a3b7c
Merge pull request #4597 from tnw513/italian_fix
...
Added hyphenated strings for full graphic display
2016-08-12 02:37:53 -07:00
Silvio Didonna
f999292eea
added hyphenated letters for full graphic display and fixed some strings
2016-08-12 08:57:22 +02:00
Scott Lahteine
67f119d18b
Add an i2c request handler
2016-08-11 18:09:18 -07:00
Scott Lahteine
2d3db5b5bd
Fixup pins_3DRAG based on updated RAMPS pins
2016-08-11 15:49:47 -07:00
Scott Lahteine
d29a64d4b3
Merge pull request #4603 from thinkyhead/rc_less_MSG_MOVE
...
Strip never-translated strings from language files
2016-08-11 14:21:58 -07:00
Scott Lahteine
d6a7ca6553
Merge pull request #4584 from thinkyhead/rc_delta_cal_more
...
Use configured feedrates, center in DELTA_CALIBRATION_MENU
2016-08-11 14:04:05 -07:00
Scott Lahteine
d3b432adca
Strip never-translated strings from language files
2016-08-11 13:41:07 -07:00
Scott Lahteine
1a558ef486
Tweak MarlinSerial precursor
2016-08-11 12:47:06 -07:00
Scott Lahteine
802818f7ab
Cleanup SdFatUtil.h
2016-08-11 12:47:06 -07:00
Scott Lahteine
52560e257f
Merge pull request #4595 from thinkyhead/rc_i2c_slave
...
Add support for i2c slave address
2016-08-11 12:39:26 -07:00
Scott Lahteine
432e9a1f50
Use configured feedrates, center for DELTA_CALIBRATION_MENU
2016-08-11 12:05:55 -07:00
Scott Lahteine
cd496dd9bd
do_blocking_move_to can't be 'inline', takes const ref args
2016-08-11 12:05:55 -07:00
Scott Lahteine
dd75fca4d9
Make M155 / M156 a bit more flexible
2016-08-11 00:52:01 -07:00
Scott Lahteine
a99ecf71d8
Add support for i2c slave address
2016-08-10 23:30:35 -07:00
Scott Lahteine
b63d70b186
Fix serial output for MBL, M303
2016-08-10 18:49:52 -07:00
Scott Lahteine
a36a168af2
Use the truly configured middle on Delta
2016-08-10 00:03:22 -07:00
Scott Lahteine
58c8e6cef2
Fixes #4576 : Convert filamentUsed to long for display
2016-08-09 23:57:28 -07:00
Scott Lahteine
01f1f779a5
Followup to #4574 , specify L for long
2016-08-09 23:43:37 -07:00
Kaibob2
1c7bd17e60
Update language_de.h with MSG_MOVE_E1 - E4
...
MSG_MOVE_E1 was missing
MSG_MOVE_E2 was missing
MSG_MOVE_E3 was missing
MSG_MOVE_E4 was missing
I assigned "0" to "MSG_MOVE_E1", "1" to "MSG_MOVE_E2" and so on, as this is what i assume to be the standard naming for the first (E0) and second (E1) extruder. This would have to be changed inthe other languages too :(
2016-08-09 20:49:26 +02:00
Scott Lahteine
880cdb553b
Include days in Graphical LCD print timer
2016-08-08 23:21:36 -07:00
Scott Lahteine
f4ac8c15e3
Merge pull request #4573 from thinkyhead/rc_mintemp_bed_later
...
Throw MINTEMP BED error only if heating
2016-08-08 23:02:42 -07:00
Scott Lahteine
b7b5b50a84
Throw bed min temp error only if heating
2016-08-08 22:49:22 -07:00
Scott Lahteine
d3ba878f70
Drop intermediate float in HEATER_0_USES_MAX6675 test
2016-08-08 22:49:22 -07:00
Scott Lahteine
3e8f9ecd1c
Extend min/max_temp_error for the bed
2016-08-08 22:49:21 -07:00
Scott Lahteine
1f15f0df5f
Merge pull request #4572 from thinkyhead/rc_digital_clock_100h
...
Show up to 99:59 in digital time
2016-08-08 22:28:29 -07:00
Scott Lahteine
8100a4dace
Fix a compile error in EMERGENCY_PARSER sanity check
2016-08-08 21:49:57 -07:00
Scott Lahteine
45f67164b6
Simplify the delay in kill()
2016-08-08 21:49:34 -07:00
Scott Lahteine
30b1c731b5
Show up to 99:59 in digital time
2016-08-08 21:26:34 -07:00
Scott Lahteine
3be4511230
Patch command order in delta calibration menu
2016-08-08 21:15:25 -07:00
Scott Lahteine
9afa060ed6
Merge pull request #4570 from thinkyhead/rc_proper_delta_calibration
...
Make DELTA_CALIBRATION_MENU more universal
2016-08-08 21:11:40 -07:00
Scott Lahteine
46c8862635
Merge pull request #4564 from AnHardt/max-spi-setup
...
MISO is an input
2016-08-08 21:01:15 -07:00
Scott Lahteine
88540d8ecf
Fix: LCD displays SD status at startup
2016-08-08 20:53:18 -07:00
Scott Lahteine
b16ea09498
Make DELTA_CALIBRATION_MENU more universal
2016-08-08 20:42:58 -07:00
Scott Lahteine
3a56836ead
Always disable SLOWDOWN for DELTA/SCARA
2016-08-08 18:06:46 -07:00
AnHardt
aa9b52b2e7
MISO is an input
2016-08-08 20:09:57 +02:00
Scott Lahteine
67c4acf750
Merge pull request #4562 from thinkyhead/rc_fix_z_dual_endstops
...
Fix Z_DUAL_ENDSTOPS with Z MIN Homing
2016-08-07 19:23:09 -07:00
Scott Lahteine
e113740fa3
Specify that Z_PROBE_*_HEIGHT is nozzle-relative
2016-08-07 17:54:17 -07:00
Scott Lahteine
462e189edd
Move pullups after Z_DUAL_ENDSTOPS block
2016-08-07 17:43:02 -07:00
Scott Lahteine
367dad5902
Sanity check Z_DUAL_ENDSTOPS with DELTA
2016-08-07 17:08:41 -07:00
Scott Lahteine
5fca110e0d
Fix Z_DUAL_ENDSTOPS with MIN homing
2016-08-07 17:08:41 -07:00
Scott Lahteine
fc11f05c11
Merge pull request #4556 from thinkyhead/rc_all_feedrates_mm_s
...
Within Marlin, maintain most feed rates in mm/s
2016-08-07 16:14:16 -07:00
Scott Lahteine
7b2abe6fc8
Use steps_to_mm in extruder runout prevent
2016-08-07 00:28:52 -07:00
Scott Lahteine
d320065320
Within Marlin, maintain most feed rates in mm/s
2016-08-07 00:28:52 -07:00
Scott Lahteine
ed0b50ebee
Merge pull request #4555 from thinkyhead/rc_mbl_index_rounding
...
Remove premature int-cast from MBL cell index methods
2016-08-06 23:34:01 -07:00
Scott Lahteine
bad286d52f
Save CPU by multiplying by pre-compiled values
2016-08-06 23:24:07 -07:00
Scott Lahteine
dce6026e0e
Remove premature cast to int
2016-08-06 23:01:29 -07:00
Scott Lahteine
cffe77c537
Merge pull request #4553 from thinkyhead/rc_lcd_chars_save_ram
...
Save bytes for custom chars (Hitachi LCD)
2016-08-06 18:29:16 -07:00
Scott Lahteine
42927530fe
Explicitly clear the screen in lcd_goto_screen
2016-08-06 18:10:39 -07:00
Scott Lahteine
a6d2c2479f
Minor cleanup of lcd_goto_screen calls
2016-08-06 18:10:39 -07:00
Scott Lahteine
e47c8b9829
Save bytes for custom chars (Hitachi LCD)
2016-08-06 18:10:39 -07:00
Scott Lahteine
0ff5005c9b
Allow connector flexibility for BQ ZUM Mega
2016-08-06 17:19:12 -07:00
Scott Lahteine
98437bd488
Allow override of CONTROLLERFAN_PIN with RAMPS EFF
2016-08-06 17:19:12 -07:00
Scott Lahteine
93eafa1785
Use DISABLED to check TEENSY pin option
2016-08-06 17:19:12 -07:00
AnHardt
98392abb78
Clean warnings for pins_BQ_ZUM_MEGA_3D.h
2016-08-06 17:19:12 -07:00
AnHardt
98e96feee9
Repair SPI-pins
...
SCK_PIN can't be defined as DIO[number] they mus be defined as pure number.
So rebuilding the structure of fastio.h in pins.h.
2016-08-06 17:19:11 -07:00
Scott Lahteine
a00783c41f
Format probe stowed test code
2016-08-06 14:31:07 -07:00
AnHardt
f37e8a31d7
Make Allen Key Probe stow
...
by switching off the tests for the probe before the stow move.
2016-08-06 14:30:38 -07:00
Scott Lahteine
5347f39fce
Merge pull request #4542 from AnHardt/rep-de
...
Repair-language.de
2016-08-05 23:50:35 -07:00
Scott Lahteine
5ef4a5577c
Merge pull request #4537 from thinkyhead/rc_fix_some_flaws
...
Patch up some flaws here and there
2016-08-05 23:49:57 -07:00
AnHardt
0d3b67a580
Repair-language.de
2016-08-06 01:00:40 +02:00
Scott Lahteine
938e6d15c4
Patch up some flaws, here and there
2016-08-05 08:17:37 -07:00
Scott Lahteine
3a3984e67a
Merge pull request #4535 from thinkyhead/rc_old_symbols_first
...
Move tests for old symbols to the top of sanity check
2016-08-04 21:24:02 -07:00
Scott Lahteine
d7b882e430
Move tests for old symbols to the top of sanity check
2016-08-04 21:03:55 -07:00
Scott Lahteine
479107d04f
Merge pull request #4530 from Kaibob2/patch-1
...
Added / Update language_de.h
2016-08-04 16:58:50 -07:00
Kaibob2
1abd7fa670
Update language_de.h
...
Added german translation for MSG_INFO_PRINT_LONGEST and MSG_INFO_PRINT_FILAMENT.
MSG_HEATING_COMPLETE changed from "Aufgeheizt" to "Extr. aufgeheizt"
MSG_HEATING changed from "Aufheizen" to "Extr. aufheizen"
2016-08-04 09:40:38 +02:00
Scott Lahteine
7e2bd9a233
Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT
2016-08-03 21:18:38 -07:00
Scott Lahteine
445458c221
Don't include zprobe_zoffset in do_probe_raise
2016-08-03 21:12:02 -07:00
Rafa Couto
0114676953
Update of Galician language 2016-08-03
2016-08-03 15:00:18 +02:00
Scott Lahteine
bd7a96ed42
Merge pull request #4517 from thinkyhead/rc_min_probe_pin
...
Define Z_MIN_PROBE_PIN always, allowing override
2016-08-02 21:35:59 -07:00
Scott Lahteine
704ae1b737
Merge pull request #4516 from thinkyhead/rc_short_prints_quiet
...
Only report finished prints longer than 1 min
2016-08-02 21:14:30 -07:00
Scott Lahteine
7ed70305df
Merge pull request #4515 from thinkyhead/rc_fix_speaker_tone
...
Prevent the 'tone(f,d)' function from being interrupted
2016-08-02 21:13:47 -07:00
Scott Lahteine
f1be87a85c
Move probe pin sanity checks out of ABL block
2016-08-02 20:55:17 -07:00
Scott Lahteine
9cb596e88c
Define Z_MIN_PROBE_PIN always, allowing override
2016-08-02 20:31:44 -07:00
Scott Lahteine
229f70f194
Only report finished prints longer than 1 min
2016-08-02 19:58:12 -07:00
Scott Lahteine
e040e00ae9
Merge pull request #4514 from thinkyhead/rc_cleanup_circularqueue
...
Patch up CircularQueue
2016-08-02 19:42:38 -07:00
Scott Lahteine
6110d57c16
Prevent the 'tone(f,d)' function from being interrupted
2016-08-02 19:37:47 -07:00
Scott Lahteine
b73203a0b7
Move some includes around to uncover missing deps
2016-08-02 19:37:46 -07:00
Scott Lahteine
f26d5425bf
Patch up CircularQueue
...
- Use `size` and `count` instead of `length` and `size`
- Fix bug: `peek` should return the item
- Clean up comments, spacing, spelling
2016-08-02 18:57:15 -07:00
Scott Lahteine
c9123adc59
Improved SCREEN / MENU macros
2016-08-02 18:05:34 -07:00
Scott Lahteine
cebeb48005
Merge pull request #4511 from thinkyhead/rc_encoder_flex
...
Allow encoder pulse/step override for more LCDs
2016-08-02 16:50:50 -07:00
Scott Lahteine
3cccaa9885
Allow encoder pulse/step override for more LCDs
2016-08-02 15:57:26 -07:00
Scott Lahteine
14c5a46ee9
Use multiplication for MMM_SCALED
2016-08-02 15:05:17 -07:00
Scott Lahteine
d8945e8464
Fix Z_HEAD index for COREYZ
2016-08-02 15:05:17 -07:00
Scott Lahteine
0f030aface
Merge pull request #4503 from AnHardt/fix-retract
...
Correct typo in retract()
2016-08-02 15:04:55 -07:00
Scott Lahteine
fbd8f06951
Merge pull request #4506 from thinkyhead/rc_buzzer_needs_beeper
...
Buzzer requires BEEPER_PIN
2016-08-02 14:40:43 -07:00
Scott Lahteine
330f82971b
Buzzer requires BEEPER_PIN
2016-08-02 14:05:37 -07:00
Scott Lahteine
e0d7b8bf27
Fix Azteeg X3 servo pin / Viki i2c
2016-08-02 14:05:37 -07:00
Scott Lahteine
7cceb15925
Merge pull request #4505 from thinkyhead/rc_auto_select_dplugs
...
Auto-select power plugs for RAMPS derivatives
2016-08-02 12:56:52 -07:00
Scott Lahteine
593b37519a
Boards with 4 power outputs are EFBF or EFBE
2016-08-02 12:34:28 -07:00
AnHardt
9ab94bd2c1
fix-babysrepping
2016-08-02 21:06:42 +02:00
AnHardt
39c4603598
Correct typo in retract.
2016-08-02 21:06:08 +02:00
Scott Lahteine
cebd2bfff0
Auto-select power plugs for RAMPS derivatives
2016-08-02 11:59:25 -07:00
Scott Lahteine
34c60f1b55
Merge pull request #4491 from thinkyhead/rc_fix_lcd_move_e
...
Use a default argument in _lcd_move_e
2016-08-01 16:45:25 -07:00
Scott Lahteine
38af251b91
Use a default argument in _lcd_move_e
2016-08-01 16:09:26 -07:00
Scott Lahteine
374ae6c099
Fix pins for RAMBO plus VIKI
2016-08-01 16:09:26 -07:00
Scott Lahteine
7594138740
Merge pull request #4493 from jbrazio/buildroot-cleanup
...
Move font folder
2016-08-01 15:57:23 -07:00
Scott Lahteine
6eed37aafb
Merge pull request #4486 from thinkyhead/rc_pid_add_extrusion_rate_off
...
PID_EXTRUSION_SCALING, disabled by default
2016-07-31 18:23:51 -07:00
Scott Lahteine
4bf3526d00
Merge pull request #4463 from thinkyhead/rc_azteeg_x3_eeb
...
Wrangle RAMPS variants and derivatives
2016-07-31 18:22:49 -07:00
Scott Lahteine
1993c45759
Merge pull request #4487 from thinkyhead/rc_refresh_pos_fix
...
Update refresh_positioning - no need for obj ref
2016-07-31 18:22:38 -07:00
Scott Lahteine
f83369b79c
Update refresh_positioning - no need for obj ref
2016-07-31 18:01:13 -07:00
Scott Lahteine
63fd1f49a6
PID_EXTRUSION_SCALING, disabled by default
2016-07-31 17:49:34 -07:00
Scott Lahteine
49997e2e22
HI_VOLT_PIN => "RAMPS_Dn_PIN"
2016-07-31 15:42:52 -07:00
AnHardt
60ad365e21
repair-software-spi
2016-07-31 15:50:42 +02:00
Scott Lahteine
f388beafa1
Merge pull request #4476 from otvald/RCBugFix
...
FIX for endstop adjustemt on delta is offset
2016-07-31 01:09:54 -07:00
Scott Lahteine
3633d4978b
Merge pull request #4475 from esenapaj/Fix-for-PR-#4452
...
Fix for PR #4452 (Additional heater-state output changes)
2016-07-31 01:08:27 -07:00
Thomas Otvald Jensen
fe059f1221
During homing, line_to_axis_pos will make a path which moves across the
...
endstop trigger point. The move is stopped at endstop, so current_position
should also be adjusted to reflect this!
Caused error in subsequent call in endstop adjustment, since the movement
would assume a wrong starting position.
2016-07-30 16:50:31 +02:00
esenapaj
bd73e6d3c8
Fix for PR #4452 (Additional heater-state output changes)
...
・Add missing ';'
2016-07-30 22:49:30 +09:00
esenapaj
cd5b03d88f
Update distribution date and readme
2016-07-30 21:27:29 +09:00
Scott Lahteine
f575e92f2e
Merge pull request #4473 from esenapaj/Follow-up-the-PR-#4408-etc
...
Follow-up the PR #4408 (Add support for reprapworld LCD), etc
2016-07-30 04:45:27 -07:00
esenapaj
657ef8aded
Follow-up the PR #4408 (Add support for reprapworld LCD), etc
...
・Put #define REPRAPWORLD_GRAPHICAL_LCD into all the example
configuration files
・Adjust spacing
2016-07-30 20:32:57 +09:00
Scott Lahteine
83d341c394
Make Conditionals.h a catch-all for old configs
2016-07-30 04:25:30 -07:00
Scott Lahteine
de951c64f1
Make pins for EFF a consistent order
2016-07-30 04:17:21 -07:00
Scott Lahteine
49f75b7891
pins_RAMPS_14.h => pins_RAMPS.h
2016-07-30 04:17:21 -07:00
Scott Lahteine
d3b713cebc
Set flags for RAMPS "type" in pins.h
2016-07-30 04:17:21 -07:00
Scott Lahteine
223b7e473f
RAMPS assignment for derivatives
2016-07-30 04:17:21 -07:00
Scott Lahteine
3865843283
Consolidate setting of RAMPS High Voltage PWM outputs
2016-07-30 04:17:21 -07:00
Scott Lahteine
bdac2eb13a
Don't set non-existent SLED_PIN
2016-07-30 04:17:21 -07:00
Scott Lahteine
bfbd01e29a
Merge pull request #4470 from thinkyhead/rc_fix_manual_move
...
Followup to #4468
2016-07-30 04:17:05 -07:00
Scott Lahteine
802d873fc1
Merge pull request #4469 from esenapaj/Fix-for-PR-#4453
...
Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS)
2016-07-30 04:08:54 -07:00
Scott Lahteine
8e2f095dde
Merge pull request #4456 from jbrazio/speaker-type3
...
Improvement to non-blocking speaker
2016-07-30 04:07:08 -07:00
Scott Lahteine
ad68b4cb8b
Followup to #4468
2016-07-30 03:49:42 -07:00
esenapaj
b8c112c490
Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS)
2016-07-30 19:37:43 +09:00
Scott Lahteine
2f76138645
Merge pull request #4468 from thinkyhead/rc_fix_manual_move
...
Specify manual-movable E axes by extruder type
2016-07-30 03:21:43 -07:00
Scott Lahteine
696b63e300
Specify manual-movable E axes by extruder type
2016-07-30 00:36:48 -07:00
Scott Lahteine
46c33f1cfa
Merge pull request #4467 from jbrazio/safe_delay-millis_t
...
Makes safe_delay() to be fully compatible with delay()
2016-07-29 20:23:44 -07:00
Scott Lahteine
9e21b2e51d
Merge pull request #4455 from AnHardt/double-bump-feature
...
double bump probing as a feature
2016-07-29 20:00:10 -07:00
Scott Lahteine
db4d03bc81
Merge pull request #4452 from thinkyhead/rc_fix_heaterstates_part_2
...
Additional heater-state output changes
2016-07-29 19:58:00 -07:00
Scott Lahteine
c68ca95345
Merge pull request #4464 from thinkyhead/rc_fix_steps_per_mm_handling
...
Account for DELTA in Planner::refresh_positioning
2016-07-29 19:34:59 -07:00
João Brázio
226e74a438
Fixes safe_delay() to be fully compatible with delay()
2016-07-30 02:56:26 +01:00
João Brázio
8e79e8cdb3
Adds types.h
2016-07-30 02:55:52 +01:00
Scott Lahteine
844a4e799e
Account for DELTA in Planner::refresh_positioning
2016-07-29 18:41:11 -07:00
AnHardt
7188ce0ad6
double bump probing as a feature
...
Why double touch probing is not a good thing.
It's widely believed we can get better __probing__ results when using a double touch when probing.
Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.
Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.
What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.
So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)
What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
2016-07-30 03:00:49 +02:00
Scott Lahteine
c31f56a38c
Deprecate EXTRUDER_WATTS and BED_WATTS
2016-07-29 17:34:14 -07:00
Scott Lahteine
e1970b4b28
Show power output in same order as temp output
2016-07-29 14:55:22 -07:00
Scott Lahteine
74df828acc
Show ADC values inline rather than after
2016-07-29 14:55:18 -07:00
João Brázio
2b5faa61e2
Consolidates Buzzer and Speaker into a single object
2016-07-29 19:25:39 +01:00
João Brázio
8093c5f534
Non-blocking speaker now uses arduino's tone()
2016-07-29 18:45:50 +01:00
João Brázio
8896f08074
Fixes a compilation error introduced by #4448
2016-07-29 18:33:42 +01:00
Scott Lahteine
ea5ac94804
Improved MANUAL_[XYZ]_HOME_POS
...
No need for `MANUAL_HOME_POSITIONS`. Just set each one as-needed to
override the automatic behavior.
2016-07-28 19:51:48 -07:00
Scott Lahteine
b40661cb18
Fix output of heater states
2016-07-28 17:40:01 -07:00
Scott Lahteine
9083e5420a
Merge pull request #4419 from AnHardt/sd2pinmap
...
Switch Sd2CardLib to fastio
2016-07-28 17:38:46 -07:00
Scott Lahteine
6f59560526
Merge pull request #4448 from jbrazio/speaker-followup
...
A little cleanup at speaker.h
2016-07-28 17:37:36 -07:00
Scott Lahteine
c94b6dd3e7
Revert to SanityCheck on every .cpp file
2016-07-28 17:17:50 -07:00
Scott Lahteine
256b03598d
Merge pull request #4450 from thinkyhead/rc_fix_delta_optimization
...
Fix DELTA speed calculation
2016-07-28 16:50:04 -07:00
Scott Lahteine
753283e020
inverse_second => inverse_mm_s
2016-07-28 16:35:18 -07:00
Scott Lahteine
83e1d90ca3
Undo errant optimization of block->millimeters
2016-07-28 16:26:52 -07:00
João Brázio
909e98b1af
A little cleanup at speaker.h
2016-07-29 00:03:25 +01:00
Scott Lahteine
ae1c7bca1b
Merge pull request #4445 from thinkyhead/rc_fix_rdfgsc_mega3
...
Fix for R.D.F.G.S.C. with MEGATRONICS 3 board
2016-07-28 15:55:30 -07:00
Scott Lahteine
03fdb26cd2
Wrangle encoder bits, LCD_CLICKED
2016-07-28 14:44:37 -07:00
Scott Lahteine
155def24c6
BLEN_A, B, C are defined in ultralcd headers
2016-07-28 14:38:50 -07:00
Scott Lahteine
42dcc3bf50
Remove "the click" comments
2016-07-28 14:38:50 -07:00
Scott Lahteine
0eba65f96b
Fix for R.D.F.G.S.C. with MINITRONICS board
2016-07-28 14:38:50 -07:00
fabtopia
83d0d59303
Fix for R.D.F.G.S.C. with MEGATRONICS 3 board
...
The support for reprapworld LCD boke the code for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER. See Full Grapics Display does not work any more after #4408 #4439
2016-07-28 13:12:19 -07:00
João Brázio
4f191a384b
Moves the font folder into the buildroot
2016-07-28 19:56:41 +01:00
Scott Lahteine
5367d56f87
Merge pull request #4434 from thinkyhead/rc_delta_safe_homing
...
DELTA should ignore Z_SAFE_HOMING
2016-07-27 23:41:52 -07:00
Scott Lahteine
2525528fb2
DELTA should ignore Z_SAFE_HOMING
2016-07-27 23:25:56 -07:00
Scott Lahteine
ab4b2a66ff
Allow zero Z_RAISE_BETWEEN_PROBINGS
2016-07-27 05:00:58 -07:00
Scott Lahteine
8953e3e984
Allow Z_SAFE_HOMING without a probe
2016-07-27 04:33:56 -07:00
AnHardt
e4942d2163
Switch SD2cadrLib to fastio
...
Replace all fastDigitalRead/Write() with READ/WRITE()
Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files.
Remove these conditional pin definitions from the pin-files. They are now always defined.
Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h.
Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
2016-07-27 12:40:44 +02:00
Scott Lahteine
21e744c454
Allow zero raise for deploy/stow
2016-07-26 17:19:25 -07:00
Scott Lahteine
54084612fd
Merge pull request #4415 from petrzjunior/transl
...
[LANGUAGE] Update Czech (Info screen strings)
2016-07-26 13:20:20 -07:00
Scott Lahteine
5597400cda
Merge pull request #4414 from thinkyhead/rc_split_conditionals
...
Split up Conditionals.h into two files
2016-07-26 13:16:52 -07:00
Scott Lahteine
4be635ec6e
Remove MSG_PRINT_TIME from languages
2016-07-26 12:47:45 -07:00
Scott Lahteine
3be49881c0
Make SanityCheck.h a catch-all for obsolete configs
2016-07-26 12:41:40 -07:00
Scott Lahteine
fa647cca23
Do the sanity check just once per build
2016-07-26 12:37:14 -07:00
Scott Lahteine
24a1a16e5d
Move versioning to MarlinConfig.h
2016-07-26 12:37:14 -07:00
Scott Lahteine
7e70a0b05d
Move pins / Arduino includes to MarlinConfig.h
2016-07-26 12:37:14 -07:00
Scott Lahteine
d9f7ed9a3c
Move some macros from Marlin.h to macros.h
2016-07-26 12:37:13 -07:00
Scott Lahteine
277899c175
Move include _Bootscreen.h where needed
2016-07-26 12:37:13 -07:00
Scott Lahteine
83c4653c71
Include boards and macros ahead of configs
2016-07-26 12:19:50 -07:00
Scott Lahteine
5f4702ecb2
Make Conditionals.h a catch-all for old configs
2016-07-26 12:19:50 -07:00
Scott Lahteine
8a44928df3
Make Conditionals.h a catch-all for old configs
2016-07-26 12:19:50 -07:00
Petr Zahradník junior
3d9b878cf0
Czech update
2016-07-26 13:48:27 +02:00
Scott Lahteine
c6226bb0aa
Unify config in a single include without nested includes
2016-07-25 23:04:19 -07:00
Scott Lahteine
2d378fac1b
No need to include thermistortables.h in Configuration.h
2016-07-25 22:43:50 -07:00
Scott Lahteine
df27d01cd9
Arrange needed includes in Marlin.h
2016-07-25 20:53:36 -07:00
Scott Lahteine
93ea281061
Split up Conditionals.h into two files
...
Rather than include twice, which is tricky but may confuse
2016-07-25 20:30:45 -07:00
Scott Lahteine
8684570f68
Merge pull request #4412 from thinkyhead/rc_followup_4402
...
Followup #4402 fixing 3-point leveling
2016-07-25 16:10:50 -07:00
Scott Lahteine
c55b7d0750
Merge pull request #4405 from thinkyhead/rc_theres_always_something
...
Move HAS_DIGIPOTSS to Conditionals.h
2016-07-25 15:58:42 -07:00
Scott Lahteine
42eebcd518
Merge pull request #4409 from thinkyhead/rc_cleanup_comment
...
Clean up Transfer Buffer Size comment
2016-07-25 15:58:34 -07:00
Scott Lahteine
5272147f7c
Followup #4402 fixing 3-point leveling
2016-07-25 15:56:34 -07:00
Scott Lahteine
fcc39e2b5f
Clean up Transfer Buffer Size comment
2016-07-25 12:54:55 -07:00
Scott Lahteine
0c0a63322b
Patches to prepare REPRAPWORLD_GRAPHICAL_LCD
2016-07-25 12:10:25 -07:00
brupje
a60a668f6b
Support for REPRAPWORLD_GRAPHICAL_LCD
2016-07-25 12:10:25 -07:00
Scott Lahteine
4f2ff46ab9
Move HAS_DIGIPOTSS to conditionals
2016-07-25 00:10:46 -07:00
Scott Lahteine
54f4f80077
Merge pull request #4404 from thinkyhead/rc_better_stepper_indirection
...
Arrange stepper_indirection by axis
2016-07-24 19:26:39 -07:00
Scott Lahteine
169c21b477
Merge pull request #4402 from thinkyhead/rc_consistent_positioning
...
Account for coordinate space offsets
2016-07-24 19:23:20 -07:00
Scott Lahteine
750a1e5116
Arrange stepper_indirection by axis
2016-07-24 19:00:51 -07:00
Scott Lahteine
7c27f34996
Merge pull request #4397 from thinkyhead/rc_tweak_eeprom
...
Neaten up EEPROM read/write functions
2016-07-24 18:45:54 -07:00
Scott Lahteine
2595a40a61
Account for coordinate space more in G28 / G29 / M48
2016-07-24 18:34:05 -07:00
Scott Lahteine
060dc6d95a
Neaten up EEPROM read/write functions
2016-07-24 18:19:39 -07:00
Scott Lahteine
b7b7c90477
Merge pull request #4389 from thinkyhead/rc_optimize_planner
...
Optimize planner with precalculation, etc.
2016-07-24 17:48:23 -07:00
Scott Lahteine
6900bb2286
Merge pull request #4395 from tnw513/italian_fix
...
Update Italian translations. Remove trailing spaces.
2016-07-24 17:47:48 -07:00
Scott Lahteine
e4816293a8
serial_echopair_P for uint16_t
2016-07-24 17:46:37 -07:00
Scott Lahteine
d8e5af6834
Use RAW_POSITION for MBL in planner.set_position_mm
2016-07-24 17:20:36 -07:00
Scott Lahteine
b183442c61
Fix inactive_extruder_x_pos for coordinate space
2016-07-24 17:20:36 -07:00
Scott Lahteine
f75b0c2ee1
Make POSITION macros global
2016-07-24 17:20:36 -07:00
Scott Lahteine
101b60ef42
Tweak Dual X Carriage data spacing
2016-07-24 17:20:35 -07:00
Scott Lahteine
1fe60b723f
Merge pull request #4400 from thinkyhead/rc_sanity_check_temp_sensor
...
Sanity check for too many temp sensors
2016-07-24 15:38:41 -07:00
Scott Lahteine
bedda3be61
Patch generic delta error caught by sanity check
2016-07-24 15:24:40 -07:00
Scott Lahteine
a5212bf277
Sanity check for too many temp sensors
2016-07-24 13:47:27 -07:00
Scott Lahteine
d8f2876753
Replace some float division with multiplication
2016-07-24 13:27:50 -07:00
Scott Lahteine
ddde785b37
Code formatting in planner.cpp
2016-07-24 13:27:50 -07:00
Scott Lahteine
f8b5749235
Replace division in planner with multiplication
2016-07-24 13:27:49 -07:00
Scott Lahteine
b921f6b69d
Optimize calculation of block->millimeters for DELTA
2016-07-24 13:27:49 -07:00
Scott Lahteine
db5df9500b
Move sync_plan_position closer to the top
2016-07-24 13:27:49 -07:00
Scott Lahteine
2839c56f5a
Merge pull request #4390 from jbrazio/duration_t
...
Renamed timestamp_t to duration_t
2016-07-24 13:24:05 -07:00
Scott Lahteine
d6c50671d3
Sanitycheck: Z_SAFE_HOMING points are reachable
2016-07-24 10:54:47 -07:00
Scott Lahteine
a6203366b6
Sanitycheck: Z_SAFE_HOMING requires a probe
2016-07-24 10:54:25 -07:00
Scott Lahteine
bbe5b80492
Always define probe limits if there is a probe
2016-07-24 10:53:58 -07:00
Silvio Didonna
950397f2a0
Added missing translations. Removed trailing spaces for consistency ( #4376 )
2016-07-24 17:22:30 +02:00
João Brázio
50fb0f7cec
M31 serial output is now always in EN
2016-07-24 15:52:03 +01:00
João Brázio
62d96d72f3
Renamed timestamp_t to duration_t
2016-07-24 03:16:02 +01:00
Scott Lahteine
3e2b3353b0
Fix axis indices for COREYZ
2016-07-23 19:02:14 -07:00
Scott Lahteine
c287846f46
Merge pull request #4387 from thinkyhead/rc_anhardt_more_4370
...
Update Z in a unified way in run_z_probe
2016-07-23 16:47:10 -07:00
Scott Lahteine
22d0654fe6
Merge pull request #4382 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-07-23 16:31:38 -07:00
Scott Lahteine
bb93b6822a
Use set_current_from_steppers_for_axis
2016-07-23 15:25:54 -07:00
AnHardt
96a162beda
Use implications from #4370 in run_z_probe()
...
See also https://github.com/MarlinFirmware/Marlin/pull/4370#issuecomment-234713680
2016-07-23 13:09:28 -07:00
Scott Lahteine
4e67a85a5d
Macros to loop over axes
2016-07-23 13:09:28 -07:00
esenapaj
784be56e99
Follow-up the PR #4353 (General cleanup: enum)
...
・Update description of M111
2016-07-24 00:53:35 +09:00
esenapaj
3c11977558
Update Japanese translation
...
・Add translation
・Change translation
・Remove translation
2016-07-23 22:07:20 +09:00
Scott Lahteine
08459a003f
Undo the self-sabotage that is do_blocking_move_to_axis_pos
2016-07-23 00:59:11 -07:00
esenapaj
d32c4056ad
Fix for the PR #4379 (Additional logging of do_blocking_move_to)
...
・Remove unneeded PSTR()
2016-07-23 16:38:57 +09:00
Scott Lahteine
8099ee51a5
Merge pull request #4379 from thinkyhead/rc_blocking_move_logging
...
Additional logging of do_blocking_move_to
2016-07-23 00:10:55 -07:00
Scott Lahteine
8633b644cf
Merge pull request #4378 from thinkyhead/rc_debug_leveling_docs
...
Document DEBUG_LEVELING_FEATURE
2016-07-22 23:57:01 -07:00
Scott Lahteine
ad16d5019e
Additional logging of do_blocking_move_to
2016-07-22 23:53:08 -07:00
Scott Lahteine
bb9da6ebdd
Document DEBUG_LEVELING_FEATURE
2016-07-22 23:37:41 -07:00
Scott Lahteine
652fd8a826
Merge pull request #4362 from thinkyhead/rc_duplication_mode
...
DUAL_NOZZLE_DUPLICATION_MODE
2016-07-22 21:17:59 -07:00
Scott Lahteine
1766b990b8
Merge pull request #4376 from jbrazio/timestamp_t-short
...
Adds short format to timestamp_t
2016-07-22 21:17:17 -07:00
Scott Lahteine
6da3729531
Merge pull request #4370 from thinkyhead/rc_delta_fwd_kinematics
...
Delta Forward Kinematics (and LOGICAL_POSITION)
2016-07-22 21:16:00 -07:00
João Brázio
9e5dbf67e8
Update the stats menu to include longest job and extruded filament
2016-07-23 03:05:45 +01:00
João Brázio
86d9311495
Rework LCD implementation to use timestamp_t
2016-07-23 03:05:36 +01:00
Scott Lahteine
b3eb0c8569
Add LOGICAL_POSITION macro, apply to kinematics
2016-07-22 18:38:13 -07:00
Scott Lahteine
35a610abf9
const arg to inverse_kinematics
2016-07-22 17:42:48 -07:00
João Brázio
b4aad85c9a
Rework stats menu to use timestamp_t
2016-07-23 01:42:21 +01:00
João Brázio
ecd48027fa
Adds short timestamp format to timestamp_t
2016-07-23 01:41:25 +01:00
Scott Lahteine
b6afa028f4
Don't call adjust_delta on SCARA
2016-07-22 16:36:34 -07:00
Scott Lahteine
d5e2d523c7
Generalize kinematics function names
2016-07-22 16:36:34 -07:00
Scott Lahteine
9c4ad7d7ef
Clean up delta declarations in Marlin_main.cpp
2016-07-22 16:36:33 -07:00
Scott Lahteine
4b1725628b
Move kinematic functions to "private" scope
2016-07-22 16:36:33 -07:00
Scott Lahteine
cde068ea42
Use set_current_from_steppers in quickstop_stepper
2016-07-22 16:36:33 -07:00
Scott Lahteine
9f30cc84ce
Use set_current_from_steppers for other kinematics
2016-07-22 16:36:33 -07:00
AnHardt
5db9b940ee
Use forwardKinematics in DELTA run_z_probe()
2016-07-22 16:36:33 -07:00
Scott Lahteine
b5a9647fec
Use ENABLED in stepper_indirection.h
2016-07-22 16:26:06 -07:00
Scott Lahteine
cbc7f22ad9
Implement DUAL_NOZZLE_DUPLICATION_MODE
2016-07-22 16:23:58 -07:00
Scott Lahteine
91777dd76c
Add DUAL_NOZZLE_DUPLICATION_MODE option
2016-07-22 16:22:56 -07:00
Scott Lahteine
260bbb3109
Fix a couple of simple typos
2016-07-22 16:22:56 -07:00
Scott Lahteine
179e091473
Merge pull request #4374 from thinkyhead/rc_jbrazio_timestamp_t
...
Implements timestamp_t structure
2016-07-22 16:08:10 -07:00
AnHardt
499e404fbf
forwardKinematics for Delta printers
2016-07-22 16:01:51 -07:00
João Brázio
23043a1e05
Rework some code to use timestamp_t struct (saves 72 bytes)
2016-07-22 15:53:31 -07:00
João Brázio
9388dcfa49
Implements timestamp_t structure
2016-07-22 15:53:31 -07:00
Scott Lahteine
0b2c608d2f
Merge pull request #4372 from jbrazio/gcc-bark
...
Fix minor gcc warning
2016-07-22 15:18:53 -07:00
Scott Lahteine
311c7dadb6
Cleanup do_blocking_move_to for DELTA
2016-07-22 14:18:45 -07:00
Scott Lahteine
b78590e63d
Patch and cleanup run_z_probe
2016-07-22 14:18:45 -07:00
João Brázio
2f7716987d
Fix minor gcc warning
2016-07-22 16:08:56 +01:00
João Brázio
efd3aabda8
Adds missing documentation to the point_t structure
2016-07-22 15:19:20 +01:00
Scott Lahteine
39caef4279
Merge pull request #4361 from AnHardt/imp-dbmt-for-delta
...
DELTA do_blocking_move_to() more like the Chartesian one
2016-07-21 20:05:04 -07:00
Scott Lahteine
7d869ad98b
Merge pull request #4365 from thinkyhead/rc_shrink_planner_accel
...
Adjustments to planner acceleration limit
2016-07-21 18:18:15 -07:00
AnHardt
376a57232e
DELTA do_blocking_move_to() more like the Chartesian one
2016-07-22 03:12:46 +02:00
Scott Lahteine
824c6859e2
Merge pull request #4369 from thinkyhead/rc_no_static_moves
...
inline to fix warnings, smaller build size (sometimes)
2016-07-21 14:46:09 -07:00
Scott Lahteine
976c31235d
inline to fix warnings, smaller build size (sometimes)
2016-07-21 13:49:37 -07:00
AnHardt
6ef26a85d8
Back to the differences method in run_z_probe()
2016-07-21 18:16:38 +02:00
Scott Lahteine
4226f56f53
Revert the planner acceleration logic somewhat
2016-07-20 19:19:47 -07:00
Scott Lahteine
16e5348659
Merge pull request #4360 from thinkyhead/rc_toolchange_for_G28
...
Always switch to tool 0 for G28
2016-07-20 19:07:35 -07:00
Scott Lahteine
209f5c03d0
Fewer temporary vars in planner accel limit
2016-07-20 18:29:29 -07:00
Scott Lahteine
62ecd107ba
Patch ultralcd_impl header conditional names
2016-07-20 09:36:55 -07:00
Scott Lahteine
d2e9a9c188
Always switch to tool 0 for G28
2016-07-20 09:36:55 -07:00
Scott Lahteine
194d9521c3
Merge pull request #4356 from thinkyhead/rc_simpler_run_z_probe
...
Unify run_z_probe
2016-07-19 19:02:39 -07:00
Scott Lahteine
4a6ed5e221
Use HOMING_FEEDRATE_Z for Z_PROBE_SPEED_FAST
2016-07-19 18:42:48 -07:00
AnHardt
09a3cc33e6
Unify run_z_probe
...
Unify run_z_probe
Add double touch for DELTAs.
Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW
defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2
2016-07-19 18:42:48 -07:00
Scott Lahteine
6137a1d934
Merge pull request #4359 from thinkyhead/rc_wrangle_movement_etc
...
Use ENABLED(MAPPER_NON)
2016-07-19 18:22:55 -07:00
Scott Lahteine
0432613ad7
use enabled macro for mapper setting
2016-07-19 18:08:56 -07:00
Scott Lahteine
e44b37cdc2
motion section marker below homing speeds
2016-07-19 17:31:58 -07:00
Scott Lahteine
204fd6ec44
Set homing feedrates individually
2016-07-19 17:31:58 -07:00
Scott Lahteine
2bad02e60d
Reprapworld Keypad: F1 opens the Move Axis menu
2016-07-19 16:40:39 -07:00
Scott Lahteine
eaa6f568ee
Prevent re-entrant call of Reprapworld Keypad handler
2016-07-19 16:40:39 -07:00
Scott Lahteine
6abf916575
Reprapworld Keypad move step is 1mm
2016-07-19 16:40:39 -07:00
Scott Lahteine
06ac1f3bcf
Reduce Reprapworld Keypad move code size
2016-07-19 16:40:39 -07:00
Scott Lahteine
5d5affdfca
Merge pull request #4355 from thinkyhead/rc_rename_ultralcd_files
...
Rename ultralcd implementation files for consistency
2016-07-19 16:14:27 -07:00
Scott Lahteine
bb225dedc6
Merge pull request #4354 from thinkyhead/rc_jbrazio_rework_g12
...
NOZZLE_CLEAN_FEATURE with no dependency on HAS_BED_PROBE
2016-07-19 15:26:59 -07:00
Scott Lahteine
8a2efd1155
Rename ultralcd implementation files for consistency
2016-07-19 15:26:14 -07:00
João Brázio
b869fbc05e
Update all config files with the new G12 options
2016-07-19 15:07:03 -07:00
João Brázio
47fef80848
Nozzle::clean() no longer requires HAS_BED_PROBE
2016-07-19 15:07:02 -07:00
Scott Lahteine
f1f1bac0e1
Merge pull request #4341 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
2016-07-19 15:04:22 -07:00
Scott Lahteine
6c899bb520
Merge pull request #4349 from jbrazio/gcc-bark-bark
...
Removes some minor GCC warnings
2016-07-19 13:42:33 -07:00
Scott Lahteine
ef0a22871e
Merge pull request #4350 from jbrazio/followup-a875861
...
Adds utility.h
2016-07-19 13:40:52 -07:00
Scott Lahteine
9eba58a031
Merge pull request #4351 from jbrazio/u8glib-converter
...
Updates u8glib's bmp2hex converter
2016-07-19 13:39:33 -07:00
Scott Lahteine
c502018eab
Merge pull request #4353 from jbrazio/global-enum-file
...
General cleanup: enum
2016-07-19 13:37:56 -07:00
Scott Lahteine
0f9953b031
Merge pull request #4342 from AnHardt/rep-cons-g28
...
Introduce line_to_axis_pos() for use in homeaxis()
2016-07-19 12:56:58 -07:00
AnHardt
11c075c6b2
Introduce line_to_axis_pos(axis_codes axis, float where, float feed_rate = 0.0)
...
and use it in `homeaxis()` instead of `do_blocking_move_to_axis_pos()`.
`do_blocking_move_to_axis_pos` was wrong because it performed subdivided, delta-corrected moves for x- and y-axis.
The first common move for delta homing is like quick_home but for 3 towers.
Fix two warnings.
2016-07-19 17:24:44 +02:00
João Brázio
3ebad4e020
Moves all global enums to a central file
2016-07-19 14:31:09 +01:00
João Brázio
238fefcb00
Updates Stopwatch class to use internal state enum
2016-07-19 14:30:44 +01:00
João Brázio
30ac0782a9
Comment section style correction
2016-07-19 03:27:42 +01:00
João Brázio
8ecee431c4
Updates u8glib's bmp2hex converter
2016-07-19 03:16:30 +01:00
João Brázio
79e7721b76
Removes some minor GCC warnings
2016-07-19 03:03:11 +01:00
João Brázio
f4d63796b2
Adds utility.h
2016-07-19 02:55:23 +01:00
esenapaj
361307831e
Follow-up the PR #4335 (Debug char, fix compile errors for lcd pins)
...
・Solve a flickering when SD card is inserted or removed at using a ASCII
LCD + language_kana.h
2016-07-18 20:09:24 +09:00
esenapaj
ff48bbb86a
Update Japanese translation
...
・Add new translation
2016-07-18 17:01:56 +09:00
Scott Lahteine
46117593b9
Merge pull request #4185 from esenapaj/Update-Japanese-translation
...
Update Japanese translation (work in progress)
2016-07-17 18:36:34 -07:00
Scott Lahteine
3422103863
Merge pull request #4310 from thinkyhead/rc_mbl_position_shift
...
Fix position shift with MBL
2016-07-17 18:31:25 -07:00
Scott Lahteine
92757bd7b3
Merge pull request #4339 from esenapaj/Follow-up-the-PR-#4163
...
Follow-up the PR #4163 (Mixing and Switching Extruders)
2016-07-17 18:15:23 -07:00
Scott Lahteine
493d30cd97
Drop intermediate nx, ny, and set destination directly
2016-07-17 17:59:52 -07:00
Scott Lahteine
07a735ad22
We always use destination so modify mesh_buffer_line
2016-07-17 17:57:33 -07:00
Scott Lahteine
04a5b7b257
A macro to normalize positions
2016-07-17 17:57:32 -07:00
esenapaj
5c8e87a866
Follow-up the PR #4163 (Mixing and Switching Extruders)
...
・Update forgotten K8400 files
2016-07-18 09:48:13 +09:00
Scott Lahteine
86eb5251c5
Fix some debug messages
2016-07-17 17:10:02 -07:00
Scott Lahteine
1e57a6af73
Use blocking_move, current_position in G28 homing
2016-07-17 16:56:13 -07:00
Scott Lahteine
f6a3a1da09
nz and ne are always set, so drop them down
2016-07-17 14:12:39 -07:00
Scott Lahteine
d0009e013b
Rename cell index vars
2016-07-17 14:12:39 -07:00
Scott Lahteine
697373b071
Reduce code size of mesh_buffer_line
2016-07-17 14:11:25 -07:00
Scott Lahteine
103d312f6d
MBL can actually do up to 9 x 9
2016-07-17 14:11:25 -07:00
Scott Lahteine
f4a69281fc
Only call mesh_buffer_line when MBL is active
2016-07-17 14:11:25 -07:00
Scott Lahteine
799a31cd30
Include the position_shift when splitting mesh lines
2016-07-17 14:08:20 -07:00
Scott Lahteine
f242aea032
Merge pull request #4319 from thinkyhead/rc_feedrates_to_mess_with_you
...
Wrangle feed rate variables
2016-07-17 14:07:52 -07:00
Scott Lahteine
0342661b3f
Merge pull request #4335 from thinkyhead/rc_status_pad_jp
...
Debug char, fix compile errors for lcd pins
2016-07-17 14:07:08 -07:00
Scott Lahteine
81e01152bb
Merge pull request #4336 from thinkyhead/rc_bltouch_sensor
...
BLTouch probe sensor
2016-07-17 14:06:32 -07:00
Scott Lahteine
1583177ef4
BLTOUCH probe config option
2016-07-17 13:55:38 -07:00
Scott Lahteine
176b9627c7
Some cleanup ahead of BLTOUCH support
2016-07-17 13:55:38 -07:00
Scott Lahteine
39706f3e57
Endstop invert flags as macros instead of const bool
2016-07-17 13:51:02 -07:00
Scott Lahteine
7242d44810
Endstops vars already initialized
2016-07-17 13:38:48 -07:00
Scott Lahteine
5ed1e7a464
codenum => dwell_ms
2016-07-17 13:35:21 -07:00
Scott Lahteine
69d6016941
Revert default state of endstops in M502
2016-07-17 13:35:21 -07:00
Scott Lahteine
0fcd3706dd
Replace ENDSTOPS_ONLY_FOR_HOMING with ENDSTOPS_ALWAYS_ON_DEFAULT
2016-07-17 13:35:21 -07:00
Scott Lahteine
671634bf11
Fix spacing after section header
2016-07-17 13:35:21 -07:00
Scott Lahteine
f38553b482
fix a debug message
2016-07-17 13:29:42 -07:00
Scott Lahteine
3d78b8f929
Use HYPOT macro instead of hypot function
2016-07-17 13:29:42 -07:00
Scott Lahteine
9f9fe043ba
Apply sq macro throughout
2016-07-17 13:29:41 -07:00
Scott Lahteine
93ba5bddd7
Append units to feedrate variables
2016-07-17 13:29:41 -07:00
Scott Lahteine
5e3d3918b6
Patch compile error for RAMPS LCD pins
2016-07-17 12:27:37 -07:00
Scott Lahteine
94955a8bf7
pad string in lcd_finishstatus
2016-07-17 12:27:37 -07:00
Scott Lahteine
21ee0612e3
Debug char
2016-07-17 12:27:36 -07:00
Scott Lahteine
8f24e0a556
Debugging of MBL in G28
2016-07-17 11:08:30 -07:00
Scott Lahteine
05da02f0a2
Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER
2016-07-17 10:53:10 -07:00
Scott Lahteine
22b4cff423
New extruder type configuration options
2016-07-17 00:13:56 -07:00
esenapaj
601015b73e
Update Japanese translation
2016-07-17 16:04:12 +09:00
Scott Lahteine
9766e24504
Merge pull request #4277 from thinkyhead/rc_mks_13_viki2
...
Support for VIKI2 with MKS 1.3 / 1.4
2016-07-16 23:49:33 -07:00
Scott Lahteine
02285662f5
Merge pull request #4298 from jbrazio/feature/filament-counter
...
Adds filamentUsed and longestPrint stats to PrintCounter
2016-07-16 23:48:46 -07:00
Scott Lahteine
bf16ae5a70
Merge pull request #4299 from jbrazio/feature/g27-park-nozzle
...
Implements park nozzle feature
2016-07-16 23:47:12 -07:00
Scott Lahteine
aaa0d298b9
Merge pull request #4326 from thinkyhead/rc_no_static_items_fix
...
Suppress compiler warnings in ultralcd.cpp
2016-07-16 23:38:08 -07:00
Scott Lahteine
cc3ef73583
Merge pull request #4327 from thinkyhead/rc_petrzjr_long_print
...
LCD Longer print
2016-07-16 23:37:34 -07:00
Scott Lahteine
77c8fb627f
Merge pull request #4329 from thinkyhead/rc_italian_fix
...
Added missing Italian translations
2016-07-16 23:37:15 -07:00
Scott Lahteine
b14888501b
Merge pull request #4301 from Ingramz/RCBugFix
...
Add Cartesio CN Controls V11
2016-07-16 22:35:07 -07:00
Silvio Didonna
32e0d71729
Added missing translations
2016-07-16 22:26:46 -07:00
Scott Lahteine
0f3232065e
Merge pull request #4305 from jbrazio/feature/splash-improvement
...
Custom boot screen feature improvement
2016-07-16 21:59:39 -07:00
Petr Zahradník junior
2d7fe9dc78
LCD Longer print
2016-07-16 18:21:06 -07:00
Scott Lahteine
eee903bd4b
Format some DAC lines
2016-07-16 17:59:13 -07:00
Scott Lahteine
d53dcaa796
Suppress some compiler warnings
2016-07-16 17:59:01 -07:00
João Brázio
fa4274cf4c
Improves the custom bootscreen logo feature
2016-07-17 01:31:44 +01:00
João Brázio
1f3283e3a5
Adds custom boot logos for bq Hephestos 2 and Cartesio
2016-07-17 01:31:36 +01:00
João Brázio
dfa1c45075
Adds a notice to vendors about the SHOW_CUSTOM_BOOTSCREEN directive
2016-07-17 01:15:17 +01:00
Scott Lahteine
ed468e848f
Merge pull request #4321 from esenapaj/Follow-up-the-PR-#4287
...
Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15)
2016-07-16 17:14:21 -07:00
João Brázio
a8758619ec
The safe_delay() is now globaly accessible
2016-07-16 12:28:06 +01:00
João Brázio
9a00108cb6
Adds the WEBSITE_URL as the boot screen line 2
2016-07-16 12:24:37 +01:00
João Brázio
f5234b0695
Adds a customizable screen timeout for the default boot screen
2016-07-16 12:24:36 +01:00
João Brázio
2f26bc2153
Adds filamentUsed and longestPrint stats to PrintCounter
2016-07-16 12:12:27 +01:00
João Brázio
336481ea81
Added G27 configuration options to all configs
2016-07-16 12:07:59 +01:00
João Brázio
c711701626
Implements a nozzle parking command (G27)
2016-07-16 12:07:59 +01:00
João Brázio
5f368d1bc3
Followup for #4320
2016-07-16 11:57:35 +01:00
João Brázio
d7c51bc4b9
Merge pull request #4320 from jbrazio/followup/4307
...
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
2016-07-16 11:48:00 +01:00
esenapaj
af9b1d79b1
Follow-up and fix the PR #4287 (Allow stopwatch and printcounter to go over 18:12:15)
...
・Remove MSG_END_HOUR and MSG_END_MINUTE from all the language files
・Change from MSG_INFO_TOTAL_PRINTS to MSG_INFO_PRINT_COUNT in German
file
2016-07-16 18:39:22 +09:00
Scott Lahteine
e563634a25
Merge pull request #4314 from AnHardt/use-d_b_m_t-in-g28
...
Use do_blicking_move_to*() in G28
2016-07-15 20:22:02 -07:00
Scott Lahteine
59ae1811c2
Merge pull request #4303 from AnHardt/delta-g28
...
DELTA: Move out of the clip-zone after G28
2016-07-15 20:20:22 -07:00
João Brázio
fdea8b6e6a
Moves do_blocking_move_to_xy() out of the HAS_BED_PROBE define
2016-07-16 03:59:49 +01:00
AnHardt
d2a49c016d
DELTA: Move out of the clip-zone after G28
...
Move down to a safe height after G28 for DELTAs.
2016-07-15 15:22:44 +02:00
AnHardt
46994fd17d
Use do_blicking_move_to*() in G28
2016-07-15 15:02:15 +02:00
João Brázio
ffbb31b235
Fixes an PSTR overflow with print_xyz()
2016-07-15 11:25:34 +01:00
Indrek Ardel
ecb23c1b65
Add Cartesio CN Controls V11 board
2016-07-15 12:55:47 +03:00
Indrek Ardel
c8f2dd7cd5
Fix CN Controls 12 styling
2016-07-15 09:54:09 +03:00
Scott Lahteine
cec7110409
Merge pull request #4308 from thinkyhead/rc_debug_gcode_t
...
Added logging related to gcode_T
2016-07-14 19:46:33 -07:00
Scott Lahteine
6446d3939a
Merge pull request #4309 from thinkyhead/rc_static_item_fix_77
...
Fix skipping of static items
2016-07-14 19:28:49 -07:00
Scott Lahteine
95ab2fd3ae
Fix skipping of static items
2016-07-14 19:16:16 -07:00
Scott Lahteine
166f19251e
Add more debugging for leveling
...
- Especially in `gcode_T`
- In `update_software_endstops`
- Some tweaks to observe
2016-07-14 19:04:13 -07:00
Scott Lahteine
7ac0b91a45
Collapsible long comment in gcode_T
2016-07-14 18:28:41 -07:00
João Brázio
e71a631f8f
do_blocking_move_*() no longer depend on HAS_BED_PROBE
2016-07-15 01:54:14 +01:00
Scott Lahteine
8bf6861af8
Merge pull request #4054 from jbrazio/feature/g12-clean-tool
...
Implements clean nozzle feature (Lulzbot's REWIPE)
2016-07-14 14:38:38 -07:00
Scott Lahteine
c5e51f6b96
finished => completed
2016-07-14 11:46:35 -07:00
Scott Lahteine
1618870c84
card.printingHasFinished does print_job_timer.stop
2016-07-14 11:39:58 -07:00
Scott Lahteine
34da77dad3
Simply run M31 at the end of an SD print
2016-07-14 11:39:58 -07:00
Scott Lahteine
23d2bc5ab0
Patch Greek for new strings
2016-07-14 11:39:58 -07:00
Scott Lahteine
a8d71f0ac6
Support longer print times in M31
2016-07-14 11:39:58 -07:00
Scott Lahteine
e481b79af1
Allow stopwatch and printcounter to go over 18 hours
2016-07-14 11:39:57 -07:00
João Brázio
68c343a09a
Added G12 configuration options to all configs
2016-07-14 00:38:42 +01:00
João Brázio
4937f9ada4
Minor G12 tweaks and point_t struct extension
2016-07-14 00:07:36 +01:00
Scott Lahteine
6080924589
Merge pull request #4296 from jbrazio/feature/bqh2-update
...
Update the bq Hephestos 2 configuration
2016-07-13 13:18:09 -07:00
Scott Lahteine
ed89c71e53
Merge pull request #4291 from esenapaj/Follow-up-the-PR-#4278
...
Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1)
2016-07-13 13:17:03 -07:00
João Brázio
021544f572
Improves G12 zig-zag pattern
2016-07-13 21:14:56 +01:00
João Brázio
b05a75655a
Implements a nozzle cleaning pattern generator (G12)
2016-07-13 21:14:19 +01:00
João Brázio
005af84140
Update the bq Hephestos 2 configuration
2016-07-13 21:06:31 +01:00
esenapaj
8f03f0be9b
Follow-up the PR #4252 (Replace PLA/ABS preheating with generic)
2016-07-13 22:42:16 +09:00
esenapaj
c2c8ab4698
Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1)
2016-07-13 22:24:31 +09:00
Scott Lahteine
4f77adddbe
Merge pull request #4286 from thinkyhead/rc_debug_clean
...
Prefix and suffix in debug output
2016-07-12 20:49:15 -07:00
Scott Lahteine
e5c7af5ddc
Merge pull request #4222 from thinkyhead/rc_allow_cold_extrude
...
M302: Add "P" parameter, status output
2016-07-12 20:40:14 -07:00
Scott Lahteine
2224032568
Merge pull request #4285 from thinkyhead/rc_manual_move_fast_fine
...
No delay for the smallest LCD moves
2016-07-12 20:16:38 -07:00
Scott Lahteine
cdd77d23bb
Neaten up temperature member data
2016-07-12 20:04:15 -07:00
Scott Lahteine
d4c68279c8
Add "P" parameter to M302
2016-07-12 20:04:15 -07:00
Scott Lahteine
a5bae3c7d5
Merge pull request #4229 from blubbfish/patch-1
...
Update language_de.h for German translation
2016-07-12 20:01:46 -07:00
Scott Lahteine
a8b6b6a128
Merge pull request #4252 from thinkyhead/rc_rename_hpb
...
Replace PLA/ABS preheating with generic
2016-07-12 20:00:33 -07:00
Scott Lahteine
1e14df876d
Use varname as prefix in DEBUG_POS, string as suffix
2016-07-12 19:58:09 -07:00
Scott Lahteine
9e8b3e5ee6
Homing direction is irrelevant in probe raise!
2016-07-12 18:09:02 -07:00
Scott Lahteine
ecd5e810ac
No delay for the smallest LCD moves
2016-07-12 18:09:01 -07:00
Scott Lahteine
2b9515d60f
Merge pull request #4281 from AnHardt/lang-system
...
Don't use UTF-strlen() if the text is not UTF
2016-07-12 17:21:28 -07:00
Scott Lahteine
973a669aa3
Merge pull request #4264 from thinkyhead/rc_ultralcd_encoder_pos
...
Remove extraneous conditions for encoder position
2016-07-12 16:54:13 -07:00
Scott Lahteine
e9f62d8fdb
Remove extraneous conditions for encoder position
2016-07-12 16:41:00 -07:00
Scott Lahteine
7c81398f95
Merge pull request #4279 from esenapaj/Follow-up-the-PR-#4271
...
Follow-up the PR #4271 (X_DUAL_STEPPER_DRIVERS)
2016-07-12 16:39:37 -07:00
Scott Lahteine
0554b65d22
Merge pull request #4284 from thinkyhead/rc_serial_ln_macros
...
Sled-probe sanity fix, conditionals for remaining types of leveling
2016-07-12 16:36:33 -07:00
Scott Lahteine
655c3fd55f
Move delta ABL sanity checks up
2016-07-12 16:10:16 -07:00
Scott Lahteine
db0882d068
AUTO_BED_LEVELING_3POINT and DELTA_BED_LEVELING_GRID
2016-07-12 16:10:11 -07:00
Scott Lahteine
e974ac63ef
Init matrix in planner.init
2016-07-12 15:55:27 -07:00
Scott Lahteine
47d55513ec
Merge pull request #4280 from AnHardt/msg-file-upload
...
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
2016-07-12 13:02:52 -07:00
AnHardt
b273736962
Make MAPPER_NON the fall back mapper
...
Make MAPPER_NON the fall back mapper - if no other is defined.
One list less to maintain.
2016-07-12 19:59:14 +02:00
AnHardt
54d35230df
Don't use UTF-strlen() if the text is not UTF
2016-07-12 19:59:03 +02:00
Scott Lahteine
a1de96d152
Merge pull request #4278 from thinkyhead/rc_more_hotends_1
...
Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1
2016-07-12 10:36:13 -07:00
AnHardt
87957c7b44
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
...
Finalalize MSG_SD_WRITE_TO_FILE message with a \n
else RH hangs.
2016-07-12 13:13:04 +02:00
esenapaj
9b5cbf2423
Follow-up the PR #4271 (X_DUAL_STEPPER_DRIVERS)
...
・Update a forgotten Configuration_adv.h of K8400
2016-07-12 17:50:49 +09:00
Scott Lahteine
809da999dc
Apply HOTEND_INDEX in preheat methods
2016-07-11 22:27:25 -07:00
Scott Lahteine
3d78b690e5
Single PID dataset with HOTENDS == 1
2016-07-11 22:27:24 -07:00
Scott Lahteine
bf9967c65d
Apply HOTEND_INDEX in MILLISECONDS_PREHEAT_TIME
2016-07-11 22:27:24 -07:00
Scott Lahteine
11dcbae7a2
Only a single E axis. Can tool-change reseed position[E_AXIS]?
2016-07-11 22:27:24 -07:00
Scott Lahteine
4865447830
Merge pull request #4276 from esenapaj/Suppress-warnings
...
Suppress warnings
2016-07-11 19:08:59 -07:00
Scott Lahteine
815df28b0b
Merge pull request #4274 from esenapaj/Follow-up-the-PR-#4024
...
Follow-up the PR #4024 (Greek Language by @psavva)
2016-07-11 19:04:44 -07:00
Scott Lahteine
44f739a5eb
Merge pull request #4273 from esenapaj/Fix-for-the-PR-#4256
...
Fix for the PR #4256 (Additional tweaks for HOTENDS == 1)
2016-07-11 19:02:45 -07:00
Scott Lahteine
02f711fe00
Merge pull request #4275 from AnHardt/dont-deploy
...
Don't deploy/stow the probe if z-min-endstop is used for homing
2016-07-11 18:46:23 -07:00
Scott Lahteine
6a45aad893
Merge pull request #4272 from AnHardt/m100-rep
...
Repair M100
2016-07-11 18:45:13 -07:00
Scott Lahteine
243ad4312a
Merge pull request #4271 from thinkyhead/rc_X_DUAL_STEPPER_DRIVERS
...
X_DUAL_STEPPER_DRIVERS
2016-07-11 18:38:45 -07:00
Scott Lahteine
6e68dd292b
Merge pull request #4243 from thinkyhead/rc_fix_static_scrolling
...
Improve STATIC_ITEM implementation
2016-07-11 18:25:00 -07:00
Scott Lahteine
d17b161832
Don't draw current screen if simply changing screens
2016-07-11 18:14:04 -07:00
Scott Lahteine
096f9981d1
Scroll to the top when changing screens
2016-07-11 18:14:04 -07:00
Scott Lahteine
7ae84d768e
Tweak conditionals for REPRAPWORLD_KEYPAD
2016-07-11 18:14:04 -07:00
Scott Lahteine
155af6b861
Rename vars, add comments for menu macros
2016-07-11 18:14:04 -07:00
Scott Lahteine
31f2cf5f6f
Make encoderLine signed for proper compares
2016-07-11 18:14:03 -07:00
Scott Lahteine
d9f75f62c0
START_ROW => START_COL
2016-07-11 18:14:03 -07:00
Scott Lahteine
d2099fef0d
Left-justify thermistor info
2016-07-11 18:14:03 -07:00
Scott Lahteine
85aeb02aa6
Invert headings on Graphical LCD
2016-07-11 18:14:03 -07:00
Scott Lahteine
3a67fb77b0
Concatenate LCD static strings
2016-07-11 18:14:02 -07:00
Scott Lahteine
13dc619f43
Scroll static screens more simply
2016-07-11 18:14:02 -07:00
Scott Lahteine
5051723c2e
Redraw after cursor correction in STATIC_ITEM
2016-07-11 18:14:02 -07:00
esenapaj
58177a1602
Suppress warnings
2016-07-12 08:22:24 +09:00
Scott Lahteine
10ebf28ee3
Allow override of ENCODER_FEEDRATE_DEADZONE, lower default for Viki
2016-07-11 15:43:08 -07:00
Scott Lahteine
9b1ba1012a
Support for VIKI2 with MKS Gen 1.3 / 1.4
2016-07-11 15:43:08 -07:00
Scott Lahteine
55dc8051d8
Cleanup of RAMPS LCD pins
2016-07-11 15:38:55 -07:00
AnHardt
7bcab26f2a
Don't deploy/stow the probe if z-min-endstop is used for homing
...
Don't deploy/stow the probe if z-min-endstop is used for homing.
Don't apply `zprobe_zoffset` if probe was not used.
2016-07-11 22:01:44 +02:00
esenapaj
84ded1f659
Follow-up the PR #4024 (Greek Language by @psavva)
...
・Update forgotten Configuration.h of K8400
2016-07-12 04:19:09 +09:00
esenapaj
6af525e252
Fix for the PR #4256 (Additional tweaks for HOTENDS == 1)
2016-07-12 03:51:29 +09:00
AnHardt
23e0134596
Repair M100
...
M100 D was running too long - caused watchdog resets.
M100 I showed more free memory than a Arduino Mega has RAM.
2016-07-11 20:44:30 +02:00
Scott Lahteine
4b4a582c4f
X_DUAL_STEPPER_DRIVERS implementation
2016-07-11 10:22:19 -07:00
Scott Lahteine
91bd6eade7
X_DUAL_STEPPER_DRIVERS configuration option
2016-07-11 10:22:19 -07:00
Scott Lahteine
6121c9018a
Merge pull request #4265 from thinkyhead/rc_buzzer_patchup
...
Two strategies to address a stuck buzzer
2016-07-10 19:46:15 -07:00
Scott Lahteine
4a100c6832
Merge pull request #4250 from AnHardt/wait-for-cooling-slope
...
Adjust wait_for_cooling slope
2016-07-10 19:45:23 -07:00
Scott Lahteine
ed018c98d5
Merge pull request #4024 from thinkyhead/rc_greek_language
...
Greek Language by @psavva
2016-07-10 19:42:09 -07:00
Scott Lahteine
d1dffc7ad1
timestamp => endtime
2016-07-10 19:36:46 -07:00
Scott Lahteine
71674059c3
Two strategies to address a stuck buzzer
2016-07-10 19:25:23 -07:00
Scott Lahteine
928ff6487a
Greek language pack from @psavva
2016-07-10 18:59:04 -07:00
AnHardt
e92e58df1f
Adjust wait_for_cooling slope
...
Adjust wait_for_cooling slope
and drop mintemp for cooling.
See
https://github.com/MarlinFirmware/Marlin/pull/4169#issuecomment-231544532
2016-07-11 03:36:23 +02:00
Scott Lahteine
167f4aa0cc
Merge pull request #4259 from clexpert/patch-3
...
Update language_cz.h
2016-07-10 18:26:23 -07:00
Scott Lahteine
8dda05e92a
Merge pull request #4258 from clexpert/patch-2
...
Total print time for LCD correction (hours:minutes format)
2016-07-10 18:25:18 -07:00
Scott Lahteine
182c8d7f8f
Dyze High Temp Thermistor Support
2016-07-10 17:59:05 -07:00
Scott Lahteine
5b0e46c986
Merge pull request #4256 from thinkyhead/rc_fix_singlenozzle_temp
...
Additional tweaks for HOTENDS == 1
2016-07-10 17:57:00 -07:00
Scott Lahteine
ee0983ab57
Further reduction when HOTENDS == 1
2016-07-10 16:54:30 -07:00
Scott Lahteine
3e1bbd5e27
Indentation in gcode_M100
2016-07-10 16:33:51 -07:00
Scott Lahteine
b72238f406
Invariant get_pid_output with HOTENDS < 2
2016-07-10 16:33:51 -07:00
Petr Zahradnik
66602f4af6
Update language_cz.h
...
New strings:
#define MSG_HALTED
#define MSG_PLEASE_RESET
Some texts shortened for smaller displays.
2016-07-10 13:25:50 +02:00
Petr Zahradnik
eaf9e615ce
Total print time for LCD correction (hours:minutes format)
2016-07-10 13:08:05 +02:00
esenapaj
9e56d5825e
Adjust spacing
2016-07-10 14:25:29 +09:00
esenapaj
5832f4b848
Follow-up the PR #4253 (Runout Sensor without SD Card, Print Timer support in M104)
...
・Update forgotten example configuration files
2016-07-10 14:24:57 +09:00
Scott Lahteine
77283f5bf0
Merge pull request #4245 from thinkyhead/rc_simpler_therm_check
...
Simpler/extensible thermistor test in thermistortables.h
2016-07-09 21:13:42 -07:00
Scott Lahteine
f9e08b1fcd
Merge pull request #4254 from AnHardt/killscreen
...
Add a kill-screen
2016-07-09 20:44:42 -07:00
AnHardt
faac2bcfdb
Add a kill-screen
2016-07-10 04:50:45 +02:00
Scott Lahteine
3b3e52616c
Merge pull request #4253 from thinkyhead/rc_clexpert_runout
...
Runout Sensor without SD Card, Print Timer support in M104
2016-07-09 19:10:36 -07:00
Scott Lahteine
aa3ab93971
Merge pull request #4240 from AnHardt/sampler-8-7-16
...
Today's fix and cleanup collection
2016-07-09 19:09:45 -07:00
Scott Lahteine
4cd045791c
Reduce code size by trusting the compiler
2016-07-09 18:17:44 -07:00
Scott Lahteine
a8538bd7ce
General cleanup, code reduction in Marlin_main.cpp
2016-07-09 18:17:44 -07:00
Scott Lahteine
1026e5b071
Replace PLA/ABS preheating with generic
2016-07-09 18:06:51 -07:00
Petr Zahradnik
e282d69f63
Print job timer comment changed
2016-07-09 17:57:54 -07:00
Petr Zahradnik
a2159cfbc3
Error message change in SanityCheck.h
2016-07-09 17:57:54 -07:00
Petr Zahradník junior
315b4c2153
Runout sensor without SD Card
2016-07-09 17:57:53 -07:00
Scott Lahteine
51c9c3fe2c
Indentation in MarlinSerial.cpp
2016-07-09 17:57:53 -07:00
Scott Lahteine
e03414b2dd
Simpler/extensible thermistor test in thermistortables.h
2016-07-08 19:54:45 -07:00
AnHardt
4b44a23a36
Add TX-buffer for MarlinSerial
...
Similar to the current Arduino HardwareSerial
but with max. 256 byte buffer-size.
Deactivated by default.
The boards with AT90USB processor (USBCON) already use a TX-buffer.
2016-07-08 17:25:21 +02:00
AnHardt
468f7f03a2
homeaxis() can leave early
...
when no known axis needs to be homed.
Most changes are only caused from altering the indentation.
```
if (axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0) {
...
}
to
if (!(axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0)) return;
...
```
2016-07-08 15:59:33 +02:00
AnHardt
eff7912243
Ensble/disable hardware endstops in G28 globally.
...
For moving away from the endstops we do not have to disable them.
They are not tested anyway.
2016-07-08 15:49:10 +02:00
