3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,587 Commits 3 Branches 78 Tags 40 MiB
d78636c308
Commit Graph

2782 Commits

Author SHA1 Message Date
Marek Bel
b67ec501b4 Add rename sheet menu. 2019-06-24 17:11:13 +02:00
Marek Bel
e6fbac08ed Move sheet selector to submenu. 2019-06-21 15:44:56 +02:00
Marek Bel
19a474eaa5 Fix compiler warnings. 2019-06-20 18:00:29 +02:00
Marek Bel
0a48082609 Add steel sheet profile selector. 2019-06-20 16:40:53 +02:00
Renzo Dani
9a904362e5 code only for TMC2130 2019-06-20 10:17:48 +02:00
Renzo
e54497d802 added new function belt test under calibration menu 2019-06-20 00:09:55 +02:00
Marek Bel
89b578c899 Merge branch 'MK3' into multiple_sheets 2019-06-19 18:40:09 +02:00
Marek Bel
524121141a Remove commented out code. This code is of unknown genesis and purpose. It was added in commit "3.0.10 sync" two years ago and it was already commented out in that moment. 2019-06-19 15:54:24 +02:00
Marek Bel
6a272d83b1 Add compile time check for EEPROM stored varibles size. 2019-06-19 15:09:07 +02:00
Yuri D'Elia
2e073527fb Also avoid E direction inversions while coasting 2019-06-19 14:28:04 +02:00
Marek Bel
64903e0ae8 Remove unused defines. 2019-06-19 14:27:02 +02:00
Yuri D'Elia
4b3af0d2df Respect minimum direction change delay 2019-06-19 13:22:44 +02:00
Marek Bel
8b6629ad58 Fix comment grammar. 2019-06-18 20:00:02 +02:00
Marek Bel
ae9ae95187 MMU: Filter IR sensor signal when detecting whether filament tip passes to heat break. Increase number of tries when loading filament to 3. 2019-06-18 19:15:16 +02:00
KDanielK
6cb85a455f Update mmu.cpp 2019-06-18 15:08:47 +02:00
Marek Bel
24cec4091b Merge branch 'MK3' into sound 2019-06-17 17:28:19 +02:00
Marek Běl
aff020a6d4
Merge pull request #1897 from NotaRobotexe/farm_mode 
PFW-571 send PRN:4 instead PRN:1, PFW-874 new firmware version alert with 30s timeout
 2019-06-14 20:05:30 +02:00
Marek Bel
b1df1fb1f1 Fix formatting. We are never using 2 space indentation. 4 spaces are preferred, tabulator is acceptable if surrounding code uses tabs. 2019-06-14 18:18:27 +02:00
Yuri D'Elia
367a28a5a8 Default to "Live Adjust Z" when longpressing during a print (closes #1604) 
- Disable longpress action when homing or calibrating
- Default to Live Adjust during a print
- Retain "Move Z" otherwise
 2019-06-14 11:44:06 +02:00
Voinea
d81970dd3d Merge branch 'MK3' into MK3_Enable_fan_waiting_cooldown 2019-06-14 11:07:08 +03:00
DRracer
c5d130e763
Merge pull request #1914 from prusa3d/MK3_3.7.2 
Increase version.
 2019-06-14 09:39:41 +02:00
Marek Bel
fee67d9451 Increase version. 2019-06-13 16:37:51 +02:00
Marek Bel
6717590631 Merge branch 'MK3' into MK3_LA15 2019-06-13 15:39:50 +02:00
DRracer
55dc78546b
Merge pull request #1913 from mkbel/fix_spelling 
Fix spelling.
 2019-06-13 15:12:30 +02:00
Marek Bel
25f0eb9a39 Fix spelling. 2019-06-13 15:01:54 +02:00
Marek Bel
72f5e87c61 Merge branch 'MK3' into use_enum_class_2 2019-06-12 19:17:35 +02:00
Marek Bel
1390d4e5b9 Use first letter capital camel case for enum class members. Change underlying type to uint_least8_t. 2019-06-12 19:11:41 +02:00
Marek Bel
5fcf760954 Use first letter capital camel case for enum class members. Rename CustomMsgTypes to CustomMsg. Remove unnecessary maping to numbers. Change underlying type to uint_least8_t. 2019-06-12 18:54:43 +02:00
Marek Bel
51df6cdfdc Remove LcdCommands::Unknown3. Remove LcdCommands mapping to numbers, as it is not needed. 2019-06-12 18:54:37 +02:00
Marek Bel
cbb92860d0 Use first letter capital camel case for enum class members. 2019-06-12 18:54:32 +02:00
Marek Bel
0401490cc1 Use first letter capital camel case for enum class members. 2019-06-12 18:54:25 +02:00
Marek Bel
9ceba00426 Use first letter capital camel case for enum class members. Remove dependency of FanCheck values on TestError values as it is not used. 2019-06-12 18:53:09 +02:00
MRprusa3d
b7d3766ae2
Merge branch 'MK3' into PFW-790 2019-06-12 17:32:13 +02:00
Marek Bel
6dd085bcc5 Use first letter capital camel case for enum class members. 2019-06-12 16:44:07 +02:00
Marek Bel
e393d91b12 Use first letter capital camel case for enum class members. 2019-06-12 16:20:21 +02:00
Marek Bel
cc80bfa020 Merge branch 'MK3' into use_enum_class 2019-06-12 16:04:26 +02:00
DRracer
c7e1e73880 another almost 200B down by proper usage of smaller data types and enum 
classes
 2019-06-12 15:41:55 +02:00
DRracer
94a5175980 Code size reduction - saved almost 2KB 2019-06-12 15:41:34 +02:00
DRracer
8d388fa03a
Merge pull request #1911 from mkbel/layer1_cal_flash 
Layer1 cal flash
 2019-06-12 15:40:59 +02:00
Marek Bel
49f172a7b9 Convert uint8_t cycle control varibles changed in previous commit to uint_least8_t to be potentially more portable. 2019-06-12 15:01:57 +02:00
DRracer
b15bbaf177 for cycles' variables: int -> uint8_t where appropriate, part1 2019-06-12 14:58:15 +02:00
Marek Bel
7ac098a135 Refactor. Put constants needed in functions inside fuctions to limit its scope. 2019-06-12 14:20:20 +02:00
Marek Bel
2755a3733d Document. 2019-06-12 14:15:58 +02:00
Marek Bel
342954b88c Refactor. Make constants producing first layer calibration square more clear. Note layer height discrepancy. 2019-06-12 13:31:17 +02:00
DRracer
4f8ed7f123 for cycles' variables: int -> uint8_t where appropriate, part1 2019-06-12 10:31:09 +02:00
DRracer
baa36ce740 another almost 200B down by proper usage of smaller data types and enum 
classes
 2019-06-12 09:58:42 +02:00
Marek Bel
d528a53526 Refactor. Move lcd_commands_func1() to first_lay_cal.cpp and rename it to lay1cal_square(). Remove its constant parameters. Move remaining G1 code to lay1cal_meander(). Saves 6B of FLASH memory. 2019-06-12 01:36:48 +02:00
Marek Bel
60cc3d58ec Use sprintf_P in first layer calibration. Save 30B of FLASH memory. 2019-06-11 20:00:49 +02:00
Marek Bel
47a183e96e Use loop to enquecommand_P() in first layer calibration. Save 126B of FLASH memory. 2019-06-11 19:49:56 +02:00
Marek Bel
21f4669600 Make count_e() constexpr. 2019-06-11 19:22:08 +02:00
Marek Bel
4effff9e99 Use loop to enquecommand_P() in first layer calibration. Save 10B FLASH memory. 2019-06-11 18:56:29 +02:00
Marek Bel
d21f256cd0 Remove duplicate calls of lcd_timeoutToStatus.start(), move !blocks_queued() && cmd_buffer_empty() condition to outer if, rewrite using switch statement. Save 487B of FLASH memory. 2019-06-11 18:26:59 +02:00
Marek Bel
97a5d6b5f4 Make constants const. 2019-06-11 17:30:37 +02:00
Marek Bel
9b1e3213ae Variable lcd_commands_step doesn't need to be global. 2019-06-11 17:30:19 +02:00
DRracer
58948cffcd Code size reduction - saved almost 2KB 2019-06-11 17:23:01 +02:00
Marek Bel
0c9121e99e Use loop to enquecommand_P() in first layer calibration. 2019-06-11 17:08:56 +02:00
DRracer
f20125a3e2 Code size reduction - saved almost 2KB 2019-06-11 16:24:40 +02:00
Marek Běl
cb6a3e7e12
Merge pull request #1907 from DRracer/fan_check_error_fix 
Do not allow resume printing if fans are still not ok
 2019-06-11 15:12:48 +02:00
DRracer
13c3ab14fa test fan check error only when enabled by #ifdef 2019-06-11 15:05:40 +02:00
DRracer
3e37150552 Do not allow resume printing if fans are still not ok 2019-06-11 14:53:10 +02:00
Marek Bel
27145204ed Use internationalized M117, but anyway the text is not shown. 2019-06-10 21:40:12 +02:00
Marek Bel
4be8fa701e Use loop to enquecommand_P() in first layer calibration. 2019-06-10 20:41:18 +02:00
Yuri D'Elia
c40e3b550d Remove stubs and live K by default 2019-06-10 19:34:00 +02:00
NotaRobotexe
bb980e2fca sound edit, delete mute mode, add blind mode 2019-06-10 15:03:52 +02:00
Marek Běl
28e7772421
Merge pull request #1886 from leptun/MK3_fix_load_filament_5 
Fix Load Filament 5 for MMU2
 2019-06-10 14:45:55 +02:00
Marek Běl
327e6cd39b
Merge pull request #1889 from DRracer/fan_check_error_fix 
Fan check error fix
 2019-06-06 15:52:44 +02:00
DRracer
0cf6bc0677
Merge pull request #1903 from mkbel/filament_runout_mk3_2 
Filament runout mk3 2
 2019-06-06 15:51:35 +02:00
DRracer
83578c3389 documentation + minor code cleanup based on code review 2019-06-06 15:50:13 +02:00
Yuri D'Elia
0239f4bce1 Update/compute advance steps inside calculate_trapezoid_for_block 
Do not store the block e_D ratio, store directly the computed
compression factor so that we can recompute the advance steps
quickly and update them in sync with the acceleration rates.
 2019-06-05 20:25:26 +02:00
Yuri D'Elia
048628083a Remove clear_current_adv_vars() 
The pressure state is already reset implicitly at the end of each block,
meaning an extruder switch will never have to reset the internal state
anyway.

We clear the internal backpressure in the following conditions:

- when switching to a non-LA block
- when quickStop is called
- when the scheduler is idling (losing pressure)
 2019-06-05 20:25:19 +02:00
Yuri D'Elia
7d33089d9a Remove use_advance_lead 
The per-step state is kept implicitly using nextAdvanceISR,
while the current pressure is decoupled anyway.
 2019-06-05 20:25:12 +02:00
Yuri D'Elia
dc436b71fe Fix position_float after a quickStop condition 2019-06-05 20:25:05 +02:00
Yuri D'Elia
fa454f61e4 Drop unused "speed_lookup_table.h" from planner.cpp 2019-06-05 20:24:58 +02:00
MRprusa3d
1d8c24e8a9 "disable_z()" for Delta PSU IV 
correction for (motor) mode switching
 2019-06-05 19:22:04 +02:00
Marek Bel
19351df8a7 Extracted computation of z_shift for M600 into a separate function to 
improve readability. Surprisingly, also the code got shorter.
 2019-06-05 18:34:26 +02:00
Marek Bel
9c3bb14bae remove function forward decl: fsensor_restore_print_and_continue_IR 
revert LCD_BL_PIN change
 2019-06-05 18:34:10 +02:00
DRracer
aeed49a80e Fix filament runout on optical filament sensors 
Reworked the IR variant accordingly
Some code-size optimization in related functions
 2019-06-05 18:33:41 +02:00
DRracer
10247a28a3
Merge pull request #1896 from NotaRobotexe/power_panic 
documentation for power panic
 2019-06-05 16:10:04 +02:00
NotaRobotexe
0cab2284ea PFW-874 new firmware alert timeout 2019-06-05 15:48:10 +02:00
NotaRobotexe
14270ac1f6 power panic documentation 2019-06-05 15:10:51 +02:00
NotaRobotexe
d263728c37 documentation 2019-06-05 14:55:59 +02:00
DRracer
33b2aa5e58
Merge pull request #1894 from NotaRobotexe/power_panic 
Power panic Z axis fix
 2019-06-05 13:34:21 +02:00
NotaRobotexe
2c4e98dc27 power panic improvement 2019-06-05 13:12:08 +02:00
Yuri D'Elia
cda9ed4a1d Reset LA state more carefully during stop conditions 2019-06-04 16:22:40 +02:00
Yuri D'Elia
1bed8cfa94 Don't call fsensor_st_next_block repeatedly during the last step 
Rely on st_block_begin to perform a single call instead of calling
block_chunk for each advance tick in the last step
 2019-06-04 16:22:33 +02:00
Yuri D'Elia
8ce1c04740 Remove useless "extruder under pressure" flag 
That's exactly what LA does
 2019-06-04 16:22:27 +02:00
Yuri D'Elia
bca5618145 Save/restore K during a power panic 2019-06-03 17:33:19 +02:00
Yuri D'Elia
84009e1e8e Do a full fsensor_update() when initializing the sensor 
This correctly populates the "extruder info" details even when
the menu is entered for the first time after starting a print.
 2019-06-03 17:32:57 +02:00
Yuri D'Elia
fa7c0fb2c9 Avoid triggering LA during a Z-priming move 
When recovering from a pause, the nozzle is often primed while
being lowered. If LA is triggered under such a move, the pressure
advance will be wasted.
 2019-06-03 17:32:51 +02:00
Yuri D'Elia
d2432056bd Elide fsensor_st_block_begin, saving some cycles/bytes 2019-06-03 17:32:43 +02:00
DRracer
5985c0608e Revert changes to pins_Einsy_1_0.h not related to the fan check error 
fix
 2019-06-03 09:02:27 +02:00
Yuri D'Elia
5cd0177389 Cleanup fsensor_st_block_begin 2019-06-02 18:17:59 +02:00
Yuri D'Elia
b4bf79297f Remove unneeded includes from fsensor 2019-06-02 01:08:03 +02:00
Yuri D'Elia
c50b1c0351 Rework the filament counter logic 
- Move direction checks out of fsensor: fsensor_counter is now
  always in the same direction as e_steps
- Check the filament chunk after e_steps have been physically done,
  using the real e_step count so far
 2019-06-01 22:08:00 +02:00
DRracer
09fee4e64d remove fan error simulation automaton 2019-05-31 11:30:30 +02:00
DRracer
6755791778 Fix repeated fan error checking 2019-05-31 11:29:11 +02:00
DRracer
adb5baa12b Merge remote-tracking branch 'upstream/MK3' into MK3 2019-05-31 11:05:24 +02:00
DRracer
ebfad55617
Merge pull request #1888 from mkbel/always_cut_independent 
Always cut independent
 2019-05-31 07:00:37 +02:00
Marek Bel
00da4640e2 Document. 2019-05-30 23:29:33 +02:00
Marek Bel
e79c203c96 Do not always cut if it is not enabled from menu. 2019-05-30 23:04:06 +02:00
Marek Bel
ccb649b1f6 Add always cut experimental / for testing feature. 2019-05-30 23:03:59 +02:00
Marek Bel
18122049a6 Fix cut filament menu item labels. 2019-05-30 19:36:10 +02:00
Voinea
878e866401 Fix Load Filament 5 for MMU2 2019-05-30 17:28:02 +03:00
NotaRobotexe
e9c870e7a0 fix of fixof power panic 2019-05-29 20:33:22 +02:00
NotaRobotexe
3b2cbc68d8 PFW-571 send PRN:4 instead PRN:1 while changing filament 2019-05-28 18:22:34 +02:00
DRracer
1c619133a3
Merge pull request #1880 from NotaRobotexe/power_panic 
PFW-828  add uvlo tiny z positio back
 2019-05-28 14:29:13 +02:00
NotaRobotexe
bcb6129c29 delete comment 2019-05-28 14:11:38 +02:00
NotaRobotexe
8842d16832 add back uvlo tiny z positio 2019-05-28 13:50:21 +02:00
DRracer
326c061d8c testing pin 5 2019-05-27 18:27:24 +02:00
DRracer
2f96badef4
Merge pull request #1870 from NotaRobotexe/power_panic 
PFW-828 after power panic printer start print in the air
 2019-05-27 17:13:08 +02:00
Marek Běl
9c3b93f900
Merge pull request #1869 from DRracer/fix_mintemp_and_fsensor 
Fix MINTEMP errors and fsensor runout
 2019-05-27 16:32:22 +02:00
DRracer
253087a4c5 Code cleanup 2019-05-27 16:18:21 +02:00
DRracer
4d020d99f6 Code cleanup 2019-05-27 14:57:02 +02:00
Yuri D'Elia
51d6904dad Multiply the step rate when grouping advance steps 2019-05-27 14:44:09 +02:00
NotaRobotexe
f070a10904 edit 2019-05-27 10:10:24 +02:00
Yuri D'Elia
a742afcebd Remove version check 2019-05-26 22:43:06 +02:00
Yuri D'Elia
4772532524 Allow Live-K to be used on stock 3.7.1 using a stub 2019-05-26 22:14:31 +02:00
Yuri D'Elia
47d2562510 Typos 2019-05-26 21:06:29 +02:00
Yuri D'Elia
823f7b069c Fix filament sensor direction again 2019-05-26 21:06:22 +02:00
Yuri D'Elia
9d834925c0 Recalculate LA_phase correctly 2019-05-26 17:06:21 +02:00
Yuri D'Elia
3abb2188df Fixup initial error by defect 2019-05-26 16:59:45 +02:00
Yuri D'Elia
ab478ec281 Save another 144b by avoiding a calc_timer copy 2019-05-26 16:42:03 +02:00
Yuri D'Elia
20694aeabc Save 316 bytes by avoiding advance_spread copies 2019-05-26 16:41:56 +02:00
Yuri D'Elia
a28fb65bb2 Optimize advance_spread further 2019-05-26 16:41:50 +02:00
Yuri D'Elia
daa8007de5 Allow to exclude Live K from the build 2019-05-26 16:41:45 +02:00
Yuri D'Elia
6f6cef65b5 Revert "Correctly handle direction for the filament sensor" 
This reverts commit aae03ad83e.
 2019-05-26 16:41:37 +02:00
Yuri D'Elia
bddc3e84ab Use WRITE_NC directly in the isr 2019-05-25 21:52:06 +02:00
Yuri D'Elia
aae03ad83e Correctly handle direction for the filament sensor 2019-05-25 21:51:59 +02:00
Yuri D'Elia
935a798236 Speedup advance_spread for common divisors 2019-05-25 21:51:52 +02:00
Yuri D'Elia
fa7ecfc38e Check for serial roughtly in the middle of the stepper isr 2019-05-25 18:41:28 +02:00
Yuri D'Elia
0a26de1e7f Allow to live-tune K during a print 2019-05-25 18:41:21 +02:00
NotaRobotexe
55a2d588f1 PFW-828 printing in the air after power panic 2019-05-24 18:30:58 +02:00
NotaRobotexe
69455bfc75 PFW-828 fix printing in the air after power panic 2019-05-24 18:28:16 +02:00
Yuri D'Elia
282b502393 Improve the distribution of the advance steps 2019-05-24 17:08:32 +02:00
Yuri D'Elia
294bf4068d Improve debug messages 2019-05-24 17:08:32 +02:00
Yuri D'Elia
53b77bab36 Do not operate on the prev block when already in use 2019-05-24 17:08:32 +02:00
Yuri D'Elia
aae5cce28f Use the nominal frequency to merge ticks 2019-05-24 17:08:32 +02:00
Yuri D'Elia
c6dbcc494f Typo 2019-05-24 17:08:32 +02:00
Yuri D'Elia
942c38c18b Minor reformatting 2019-05-24 17:08:32 +02:00
Yuri D'Elia
9586d71adb Mention LA_DEBUG_LOGIC 2019-05-24 17:08:32 +02:00
Yuri D'Elia
a1be8b6784 Initialize current_adv_steps correctly 
Initialize at 0 both on startup and on reset on regular (non-LA)
segments to avoid cumulating errors.
 2019-05-24 17:08:32 +02:00
Yuri D'Elia
707849e6c4 Use a define instead of hard-coding a divider 2019-05-24 17:08:32 +02:00
Yuri D'Elia
a2fa8e5313 Rewrite the advance_isr scheduler 2019-05-24 17:08:32 +02:00
Yuri D'Elia
2d3fe3197c Move calc_timer into speed_lookup_table for planner reuse 2019-05-24 17:08:32 +02:00
Yuri D'Elia
9425b6b07a Planner: do not recalculate max_adv_steps, since it doesn't change 2019-05-24 17:08:32 +02:00
Yuri D'Elia
2c8e04bd5f Planner: use the correct block when updating LA factors 2019-05-24 17:08:32 +02:00
Yuri D'Elia
3b528196dd Fixup prefix echomagic for the LA config report 2019-05-24 17:08:32 +02:00
Yuri D'Elia
520cb491b2 Move speed lookup defs into a separate source 2019-05-24 17:08:32 +02:00
Yuri D'Elia
ebdc5e35e7 Remove two more OCR1A direct manipulations 
Use _NEXT_ISR and st_reset_timer to correctly reinitialize and
re-schedule the advance ticks.
 2019-05-24 17:08:32 +02:00
Yuri D'Elia
cbf1a85ec3 Switch original LA implementation with LA1.5 
This discards several Prusa optimizations for LA1.0.
We'll re-implement those later if needed.

Debugging is turned on.
 2019-05-24 17:08:32 +02:00
Yuri D'Elia
bf0c60dd45 Factor-out some repetition into fsensor_step 2019-05-24 17:08:32 +02:00
Yuri D'Elia
124540a06f Adapt LA changes to ConfigurationStore 2019-05-24 17:08:32 +02:00
Yuri D'Elia
45563bfdd3 Formatting sanity 2019-05-24 17:08:32 +02:00
Yuri D'Elia
eeea2725cb Partial LA15 support 2019-05-24 17:08:32 +02:00
DRracer
098c0979ba
Merge pull request #1848 from MRprusa3d/PFW-853 
recovery from "Stop()"
 2019-05-24 09:54:07 +02:00
DRracer
9cb0bc7bcf Fix MINTEMP errors and fsensor runout 2019-05-24 08:46:44 +02:00
NotaRobotexe
1399d7dcc8 support only for MK3/MK3S 2019-05-23 15:22:31 +02:00
Marek Běl
df02030fe0
Merge pull request #1863 from DRracer/lcd20190523 
Fix. menu texts and formatting - issues PFW-877 and PFW-879
 2019-05-23 14:31:51 +02:00
Ondrej Tuma
63235625ab pause printer by flag 2019-05-23 13:13:11 +02:00
DRracer
e17f3f8405 change language files accordingly 2019-05-23 11:14:26 +02:00
DRracer
da98977de3 Fix. menu texts and formatting - issues PFW-877 and PFW-879 2019-05-23 10:45:55 +02:00
MRprusa3d
a408f90659 recovery from "Stop()" 2019-05-18 21:28:59 +02:00
Marek Bel
15ba17f110 Fix translator columns hint for Adjusting Z: 2019-05-16 17:30:15 +02:00
Marek Bel
74d8c15b4f Fix documentation. 2019-05-16 17:23:54 +02:00
Marek Bel
dcfc6348ed Fix documentation. 2019-05-16 17:22:47 +02:00
DRracer
a453c6fc9d Save 236B by improving functions in menu.cpp. Beware - the label now has 
to come with a ':' as its last character. Changed language files along
with this commit too.
 2019-05-16 16:43:44 +02:00
Marek Bel
dad2065da6 Merge branch 'MK3' into rise_z 2019-05-15 16:37:17 +02:00
Marek Bel
1f3877b221 Extract duplicate code into function. Saves 4B of flash. 2019-05-15 16:31:10 +02:00
Marek Běl
fbc0c260b1
Merge pull request #1826 from ondratu/selftest_wizard 
Selftest fan improvements
 2019-05-15 13:43:48 +02:00
Ondrej Tuma
ebfc8c1c79 Fan autotest for swapping in Selftest 2019-05-15 10:10:46 +02:00
Ondrej Tuma
c851e158cc Manual fan check menu have default (selected) option 2019-05-15 10:10:46 +02:00
Marek Bel
1a78bd53ba Fix compiler warning 
sketch/Marlin_main.cpp: In function 'void marlin_wait_for_click()':
sketch/Marlin_main.cpp:9646:12: warning: unused variable 'busy_state_backup' [-Wunused-variable]
 2019-05-14 19:11:46 +02:00
Marek Bel
91e72a79f0 Fix compiler warning 
sketch/Marlin_main.cpp:871:13: warning: unused variable 'ir_detected' [-Wunused-variable]
 2019-05-14 19:07:50 +02:00
Marek Bel
acfcd59369 Fix compiler warning: 
sketch/menu.cpp: In function 'int menu_draw_item_puts_P(char, const char*, char)':
sketch/menu.cpp:184:1: warning: no return statement in function returning non-void [-Wreturn-type]
 2019-05-14 18:32:40 +02:00
Marek Bel
89fc9e7f92 sketch/menu.h:90:115: warning: invalid conversion from 'void (*)(int)' to 'void (*)(uint8_t) {aka void (*)(unsigned char)}' [-fpermissive] 
#define MENU_ITEM_FUNCTION_NR_P(str, number, func, fn_par) do { if (menu_item_function_P(str, number, func, fn_par)) return; } while (0)
                                                                                                                   ^
sketch/ultralcd.cpp:5926:5: note: in expansion of macro 'MENU_ITEM_FUNCTION_NR_P'
     MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '1', extr_adj, 0); ////MSG_LOAD_FILAMENT_1 c=16
 2019-05-14 18:25:43 +02:00
Marek Bel
66d20f0297 Fix code formatting (indentation). 2019-05-14 16:45:15 +02:00
Marek Bel
4de93ca19c Fix eject filament menu items numbering. 2019-05-14 16:43:33 +02:00
Marek Bel
150787efbd Generate menu item texts Cut filament <nr.> during runtime to conserve flash. 2019-05-14 16:25:29 +02:00
Marek Bel
6495a8fa58 Decrease flash reserved for secondary language. 2019-05-14 16:10:04 +02:00
Marek Bel
7c4f66181f Generate menu item texts Load filament <nr.> and Eject filament <nr.> during runtime to conserve flash. 2019-05-14 15:47:25 +02:00
Marek Běl
dddc1b84e6
Merge pull request #1825 from prusa3d/MK3_3.7.1 
Increase version 3.7.1 final.
 2019-05-13 17:29:30 +02:00
Marek Běl
efa8e6e6ba
Merge pull request #1658 from Harpalyke/save-ustep-res-with-M500 
Allow save of uStep resolution with M500
 2019-05-13 17:08:34 +02:00
Marek Bel
e93f043fee Increase version 3.7.1 final. 2019-05-13 15:09:58 +02:00
Marek Běl
bbd1b60229
Merge pull request #1437 from craiglink/memory-overrun 
set array size correctly to 4
 2019-05-11 03:01:52 +02:00
Marek Běl
12b801fa1f
Merge pull request #1397 from jhoblitt/plumbing/sh-chmod 
make all shell scripts executable
 2019-05-11 02:37:09 +02:00
Marek Běl
0a343d4d66
Merge pull request #1806 from NotaRobotexe/fw_check 
check if firmware is on right type of printer
 2019-05-11 02:11:54 +02:00
Marek Běl
176b28bc83
Merge pull request #1813 from prusa3d/MK3_3.7.1 
Enable watchdog for all variants.
 2019-05-10 17:33:44 +00:00
Marek Bel
a9d6ae296b Enable watchdog for all variants. 2019-05-10 16:30:08 +02:00
Marek Běl
2a39fad400
Merge branch 'MK3' into bugfixes 2019-05-10 13:43:36 +00:00
Marek Běl
084c6f2700
Merge pull request #1805 from DRracer/MK3 
PFW-844
 2019-05-10 13:41:59 +00:00
Marek Bel
5707d4b85c Set all target hot ends to 0 deg. Celsius instead of just hotend nr. 0 to be more safe with custom modifications. 2019-05-10 15:27:25 +02:00
DRracer
dc4f30530d Fix a number overflow to last line of LCD when doing large extruder in 
menu Settings -> Move axis -> Extruder
 2019-05-09 13:44:35 +02:00
DRracer
714fb23de6 Merge remote-tracking branch 'upstream/MK3' into MK3 2019-05-09 13:40:28 +02:00
NotaRobotexe
e7dd5c60d3 check if firmware is on right type of printer 2019-05-07 18:10:44 +02:00
Marek Běl
8692565cf0
Merge pull request #1802 from XPila/MK3 
Variable bed PWM resolution/frequency (adjusted to 5bits/32Hz)
 2019-05-07 15:13:02 +00:00
DRracer
f431d24762 Merge branch 'MK3' of https://github.com/DRracer/Prusa-Firmware into MK3 2019-05-07 16:17:14 +02:00
DRracer
0124fbf9ee Fix: display target extruder temperature on the main screen when doing 
PID calibration
 2019-05-07 16:15:42 +02:00
Robert Pelnar
85806a0f38 variable bed pwm frequency fix (input value is 7bit, not 8bit) 2019-05-07 15:35:34 +02:00
Ondrej Tuma
b7fe43bf68 Deleted bad cols/rows definitions for translation. 2019-05-07 12:52:23 +02:00
Robert Pelnar
58683da2fb Variable bed PWM resolution/frequency (adjusted to 5bits/32Hz) 2019-05-06 18:07:42 +02:00
Marek Běl
e56be687bb
Merge pull request #1800 from XPila/MK3 
return with exitcode 1 if any language not generated properly
 2019-05-06 15:58:34 +00:00
Marek Bel
1a0370e1c7 Make macro ON_MENU_LEAVE() usage similar to macros MENU_ITEM_BACK_P() and MENU_ITEM_FUNCTION_P(). 2019-05-06 17:39:00 +02:00
Robert Pelnar
fa1bdd6ab1 Lang - decreased reserved space for secondary language (10496 bytes) 2019-05-06 17:29:47 +02:00
DRracer
ffbdb43881 Remove commented code 2019-05-06 17:26:42 +02:00
Robert Pelnar
41a827fa00 Removed unused texts, increased reserved space to 0x2e00 (11776 bytes) 2019-05-06 17:24:06 +02:00
DRracer
0794430208 Fix for linearity correction not being stored to EEPROM when doing MENU- 
UP
 2019-05-06 15:33:13 +02:00
Robert Pelnar
1c9d134c62 return with exitcode 1 if any language not generated properly 
fix - include system_timer.h
 2019-05-06 15:29:57 +02:00
DRracer
e5911c42da limit printed menu text to max 18 characters 2019-05-06 12:44:36 +02:00
Robert Pelnar
3852aa4275 Different secondary language reserved space for MK3 and MK25 2019-04-30 12:42:18 +02:00
Marek Běl
177c123b4d
Merge pull request #1780 from MRprusa3d/PFW-841 
"stop" immediately after "pause" patch
 2019-04-29 14:49:49 +00:00
Marek Bel
8fadbf1b44 Do not call watchdog reset from updateTemperaturesFromRawValues(). 2019-04-29 16:41:38 +02:00
MRprusa3d
b93f37ee02 "stop" immediately after "pause" patch 2019-04-29 14:39:19 +02:00
Robert Pelnar
18dec75b56 MK2.5 - watchdog enabled + test (command "D-1") 2019-04-29 13:19:59 +02:00
NotaRobotexe
f16bea26e5 raise the Z axis before filament loading to nozzle on MMU2S 2019-04-25 17:39:09 +02:00
XPila
238079fc95
Merge pull request #1763 from mkbel/save_flash_timer2 
Do not compile timer02.c if not used. Saves 148B flash.
 2019-04-24 16:07:17 +02:00
mkbel
e8e7fa907f
Change comment 2019-04-24 15:52:24 +02:00
Robert Pelnar
1d8b2b3e18 Secondary language reserved space resized 2019-04-24 15:22:17 +02:00
Marek Bel
f25f8f1b71 Do not compile timer02.c if not used. Saves 148B flash. 2019-04-23 19:39:49 +02:00
mkbel
ca449ef517
Merge pull request #1742 from XPila/MK3-bed_pwm_revert 
Bed high frequency PWM disabled
 2019-04-16 21:04:28 +00:00
Marek Bel
75fac9dab2 Do not kill printer if External SPI flash W25X20CL is not responding. 
Remove internationalization macro for this message. It has no sense to be translated as internationalization in most cases doesn't work if it is not responding.
Show this message instead of splash screen if the error is encountered.
There is no additional delay or wait for click, as such functions doesn't work in setup function.
 2019-04-16 22:20:53 +02:00
Robert Pelnar
1f9737b4a6 Bed high frequency PWM disabled 2019-04-16 16:48:01 +02:00
Paul Bransford
863c7158b2 use modification times for sdcard sort 2019-04-16 06:24:47 -04:00
PavelSindler
7168c09eec
Merge pull request #1713 from mkbel/fix_octoprint_mmu_load_failed 
Fix octoprint mmu load failed
 2019-04-10 18:21:06 +02:00
MRprusa3d
b5f196406e (preliminary) fix @ preHeatError II 2019-04-10 00:29:58 +02:00
Marek Bel
0d3e3c506a Merge remote-tracking branch 'prusa3d/MK3' into fix_octoprint_mmu_load_failed 2019-04-09 20:54:21 +02:00
Marek Bel
c7d403733a Allow load filament retry after button push unlimited times in case mmu_continue_loading() is in blocking mode. 2019-04-09 20:50:29 +02:00
MRprusa3d
32f3471862 print parameters checking 
prusa_stat_diameter()
 2019-04-09 15:22:08 +02:00
Voinea
173062295f Enable print fan while waiting for cooldown 2019-04-06 13:42:21 +03:00
Marek Bel
84cabd3836 Change busy_state type, save 340B of flash 2019-04-05 15:20:34 +02:00
Marek Bel
bf57a59147 Extract duplicate code into function. Saves 106B flash. 2019-04-05 15:12:35 +02:00
Marek Bel
4bfa3d7e0b Reporty busy: paused for user in case MMU is not responding. 2019-04-04 19:04:15 +02:00
Marek Bel
bf1a55ab02 Add mmu_continue_loading blocking variant and use it for usb printing, so that "ok" is not returned to the controller in case MMU load failed. 
Known limitation: MMU load failed is not handled properly if it happens again after user clicked printer button to continue print.
 2019-04-04 18:15:37 +02:00
MRprusa3d
aa0edd09f5 (preliminary) fix @ (bed) preHeatError 2019-04-03 22:48:58 +02:00
MRprusa3d
4b1fc69088 "disable_z()" for Delta PSU III 
stealthChop set if motor-disable (@ Z) required
 2019-04-02 20:04:44 +02:00
PavelSindler
fd96bde69f
Merge pull request #1667 from mkbel/Add_IR_sensor_fail_message 
Add ir sensor fail message
 2019-04-02 14:55:27 +02:00
PavelSindler
a8d8d9e4c9 version change 2019-04-01 20:52:24 +02:00
PavelSindler
c440ca7369
Revert "Phase correct PWM for bed, frequency 40KHz." 2019-04-01 18:44:13 +02:00
PavelSindler
ae11c1e26f rename function 2019-03-28 16:39:56 +01:00
PavelSindler
97594c83bb function misleading names changed 2019-03-28 14:58:58 +01:00
PavelSindler
96a111119b document 2019-03-28 14:52:50 +01:00
PavelSindler
8f69d5a501 document 2019-03-28 14:48:35 +01:00
PavelSindler
1dd486d86d max length of menu item strings added 2019-03-28 13:18:28 +01:00
PavelSindler
d22793f276 Z-probe nr. states reduced to 1; 3; 5 2019-03-28 12:02:46 +01:00
PavelSindler
02faadf0b9 MMU mode renamed 2019-03-28 09:49:08 +01:00
PavelSindler
e7900aeaa1 Merge remote-tracking branch 'upstream/MK3' into 7x7_polishing 2019-03-28 08:08:54 +01:00
PavelSindler
c1da07bda0
Merge pull request #1653 from XPila/MK3 
Phase correct PWM for bed, frequency 40KHz.
 2019-03-27 21:07:15 +01:00
PavelSindler
e259967991 remove / comment debug code 2019-03-27 20:41:45 +01:00
PavelSindler
5863297538 if deviation between current Z-probe and avg, value > 50um, enlarge Z-probe movements and repeat measurement 2019-03-27 20:25:00 +01:00
PavelSindler
a9ce38df71 Function for decision if we have valid Z-calibration data in eeprom fixed, mesh bed leveling: possible crash fix, temporaty debug info on serial line. 2019-03-26 17:14:05 +01:00
MRprusa3d
17a534e42b "disable_z()" for Delta PSU II 2019-03-25 23:28:25 +01:00
Marek Bel
baeee5817e Make lcd_selftest_error() calls safer, as nullptr parameter is not handled. It is hard to believe, but it actually saves 4B flash. 2019-03-22 00:24:22 +01:00
Marek Bel
966e772702 Fix compile error for non TMC2130 endstops check. 2019-03-22 00:14:29 +01:00
Marek Bel
89f1a3bacf Fix compile error for non TMC2130 pulley check. 2019-03-22 00:11:02 +01:00
Marek Bel
8582babddb Fix compile error for manual fan check. 2019-03-22 00:08:44 +01:00
Marek Bel
d1c5c03907 Fix compile error for manual fan check. 2019-03-22 00:03:14 +01:00
Marek Bel
c45a7f8641 Fix 1_75mm_MK3-EINSy10a-E3Dv6full variant build error. 2019-03-21 23:50:01 +01:00
Marek Bel
91779a5d04 Add filament sensor false triggering message. 2019-03-21 23:36:59 +01:00
Marek Bel
ba23b1b2c5 Remove unused. 2019-03-21 22:50:46 +01:00
Marek Bel
6c28ed6349 Convert lcd_selftest_error() first parameter to enum class. 2019-03-21 22:48:57 +01:00
PavelSindler
fbe68cb287 variables scope changed 2019-03-21 19:37:34 +01:00
PavelSindler
576bfb17c7 whitespace 2019-03-21 18:51:54 +01:00
PavelSindler
175f840d16 return statement not used (fixes Pronterface issues) 2019-03-21 18:46:07 +01:00
MRprusa3d
632781c4a2 "disable_z()" for Delta PSU 2019-03-21 00:45:15 +01:00
Harpalyke
0f21ccee3c Adding the microstepping resolution for all axis to the eprom config which is persisted during M500 for Mk3 and Mk3S 2019-03-19 21:39:59 +00:00
MRprusa3d
7d98177716 farmMode updates 2019-03-19 19:48:40 +01:00
Robert Pelnar
cfd185f315 Phase correct PWM for bed, frequency 40KHz. 2019-03-19 14:50:57 +01:00
Marek Bel
4100bd33a7 Fix Dcodes compilation errors and warnings. 2019-03-19 13:53:58 +01:00
PavelSindler
e37c2e0b2e version change 2019-03-15 20:01:02 +01:00
PavelSindler
7c5e9500a8 version change 2019-03-15 20:00:07 +01:00
PavelSindler
c05561d6b1
Merge pull request #1607 from PavelSindler/7x7 
7x7 mbl and switching mmu modes
 2019-03-15 19:55:15 +01:00
PavelSindler
0ca52216f3 Revert "variants update" 
This reverts commit c3a95ab79b.
 2019-03-15 13:14:32 +01:00
Marek Bel
ffe45bdef3 Disable mmu filament cutter feature. 2019-03-15 03:38:37 +01:00
PavelSindler
80ef2686ae mmu mode switching fix 2019-03-14 18:17:40 +01:00
PavelSindler
6e26f61726 fixed 7x7 mesh bed leveling vs. Z calibration check 2019-03-14 14:48:01 +01:00
PavelSindler
ef198856a4 increase relative movement in Z to work better with higher hysteresis PINDAs 2019-03-14 14:10:52 +01:00
PavelSindler
9e0e4198c5 Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update 2019-03-14 01:52:44 +01:00
MRprusa3d
1f131f66e0 print parameters checking 
nozzle diameter
 2019-03-14 00:36:56 +01:00
PavelSindler
72f51989fa compare measured Z-value during mesh bed leveling with Z-calibration value even for 7x7 mesh 2019-03-13 19:41:09 +01:00
PavelSindler
32138ea09a menu item alignment 2019-03-13 15:08:09 +01:00
PavelSindler
6c70d59810 mbl settings initialization fix 2019-03-13 15:05:10 +01:00
PavelSindler
c3a95ab79b variants update 2019-03-12 11:57:35 +01:00
PavelSindler
b20d9171b6 Merge remote-tracking branch 'upstream/MK3' into 7x7 2019-03-12 11:47:17 +01:00
PavelSindler
42036270cf
Merge pull request #1619 from MRprusa3d/PFW-795d 
better autoLoad II
 2019-03-12 11:44:30 +01:00
PavelSindler
c55f42965d
Merge pull request #1601 from MRprusa3d/PFW-749 
SD card menu enhancement
 2019-03-12 11:42:53 +01:00
PavelSindler
c9cff11732
Merge pull request #1593 from MRprusa3d/PFW-647 
mode switching, G-code unification
 2019-03-12 11:40:43 +01:00
PavelSindler
4d2b155ff9
Merge pull request #1594 from mkbel/fix_change_filament 
Fix change filament
 2019-03-12 11:39:15 +01:00
PavelSindler
0aa21c362e compile error fix 2019-03-11 23:37:30 +01:00
PavelSindler
9a83925a97 fixed bug in counting approximate Z coordinate 2019-03-11 23:13:55 +01:00
MRprusa3d
3388444b6c better autoLoad II 
autoLoad inhibit if Support::ExtruderInfo(@MKx)/SensorInfo(@MKxS)-menu is selected
 2019-03-11 20:43:07 +01:00
PavelSindler
698f81abe0 fix compile error 2019-03-11 15:55:48 +01:00
PavelSindler
819a91ab1e switching stealth/normal mode for mmu in settings menu and tune menu 2019-03-11 12:33:22 +01:00
PavelSindler
141b78c048 number of Z-probes defualt value changed from 4 to 3, mmu stealth mode switch in settings menu 2019-03-10 16:03:46 +01:00
PavelSindler
091934462d menu correction 2019-03-08 20:06:30 +01:00
PavelSindler
315959c13a menu update 2019-03-08 20:03:23 +01:00
PavelSindler
952e0e1e77 change min. nProbeRetry to 1 2019-03-08 19:49:10 +01:00
PavelSindler
f293d61d3d faster Z probe: move Z 150um relatively to last measurement. If PINDA is triggered at the beginning of measurement, move Z 500um higher and repeat measurement 2019-03-08 18:52:14 +01:00
PavelSindler
6a864ffbab G80 parameters configurable via settings menu 2019-03-08 15:43:37 +01:00
PavelSindler
98bb2b7acf merge debug gcodes for bed analysis 2019-03-06 20:45:23 +01:00
PavelSindler
dccb6ca2c6 Merge remote-tracking branch 'upstream/MK3' into bed_analysis_gcodes2 2019-03-06 19:56:52 +01:00
PavelSindler
f0cc313fed debug gcodes (fans, bed analysis) moved to Dcodes, HOST_KEEPALIVE_FEATURE simplified 2019-03-06 19:56:48 +01:00
PavelSindler
2a71dbefb8
Merge pull request #1597 from mkbel/fix_compiler__warning 
Fix compiler  warning
 2019-03-06 19:55:18 +01:00
MRprusa3d
6217329d50 SD card menu enhancement 2019-03-06 19:51:26 +01:00
PavelSindler
101453b674 mbl submenu 2019-03-06 13:27:31 +01:00
PavelSindler
5766a5537e limit number of probes 2019-03-05 22:43:44 +01:00
PavelSindler
7c187541e1 function for valid points determination improved; simple Z-coordinate estimation; measure all points and use inaccurate Z-coordinate in case that we don't have enought information for counting Z-coordinate estimation 2019-03-05 22:36:30 +01:00
PavelSindler
d9e93e8a77 measurements points moved 10mm to the left; measure only chosen points (e.g. not points affected by magnets proximity) 2019-03-05 20:40:08 +01:00
Marek Bel
1eab058ad4 Fix uninitialized variable used. 2019-03-05 18:08:35 +01:00
Marek Bel
7fcecabd5f Fix compiler warning: variable 'previous_millis_cmd' set but not used 2019-03-05 18:04:58 +01:00
Marek Bel
484259cbb2 Fix compiler warning: 'lcd_settings_linearity_correction_menu_save' defined but not used 2019-03-05 18:00:16 +01:00
Marek Bel
28f1e309a2 Fix compiler warning: 'old_x_max_endstop' defined but not used 
Fix compiler warning: 'old_y_max_endstop' defined but not used
 2019-03-05 17:44:47 +01:00
Marek Bel
7bcd54f8ba Add missing function prototype. 2019-03-05 17:30:27 +01:00
Marek Bel
ebfd4b2f47 Fix compiler warning: unused parameter 'calib' 2019-03-05 17:02:57 +01:00
Marek Bel
790ae9f0ce Fix compiler warning: unused parameter 'pstep'. 2019-03-05 16:41:41 +01:00
Marek Bel
5b9e7c4fe7 Fix warning: assignment makes pointer from integer without a cast. 2019-03-05 16:27:47 +01:00
PavelSindler
f1031d2302 new farm statuses for pause (14) and wait for user (15) 2019-03-05 16:00:50 +01:00
Marek Bel
23859921b9 Fix compiler warnings macro redefined. 2019-03-05 15:56:20 +01:00
MRprusa3d
20a03d703d G-code unification 
"FSENSOR_RECOVER" ->-> "PRUSA fsensor_recover"
 2019-03-05 13:36:13 +01:00
Marek Bel
f161d3ade4 Change formatting. 2019-03-04 22:17:43 +01:00
Marek Bel
b2255c8be9 Preheat nozzle before loading filament in M600 (change filament) gcode. 
This fixes problem of not heating the nozzle when retrying load after MMU load failed.
 2019-03-04 22:00:24 +01:00
MRprusa3d
7e48d633cb mode switching 
info-message viewing during mode switching
 2019-03-04 21:30:36 +01:00
PavelSindler
17f095b957 shorter Z movements (makes calibration faster) 2019-03-04 20:32:56 +01:00
mkbel
27f69bb761
Merge pull request #1570 from PavelSindler/mmu_stealth_mode 
mmu stealth mode
 2019-03-04 17:09:11 +01:00
PavelSindler
7f92d73a40 MMU_STEALTH_MODE -> MMU_FORCE_STEALTH_MODE; activate_stealth_mode() function update 2019-03-04 17:04:22 +01:00
PavelSindler
9dde8c4732
Merge pull request #1591 from MRprusa3d/PFW-795c 
better autoLoad
 2019-03-04 15:31:04 +01:00
PavelSindler
1051b7c39f
Merge pull request #1583 from mkbel/fix_cut 
Fix unable to cut filament, if nozzle is already preheated.
 2019-03-04 15:29:54 +01:00
PavelSindler
e832f0f2ee
Merge pull request #1582 from mkbel/remove_unused_code 
Remove commented out code, fix formatting.
 2019-03-04 15:29:36 +01:00
Marek Bel
8812d40546 Revert "Fix compiler warning: variable 'kill_message' set but not used" 
This reverts commit a964f996fa.
 2019-03-04 15:05:14 +01:00
MRprusa3d
b02ca18c93 better autoLoad 
autoLoad inhibit if Support::ExtruderInfo-menu is selected
 2019-03-04 12:52:35 +01:00
Marek Bel
9e38b1e101 Add missing message "Preheating to cut". 2019-03-01 18:17:08 +01:00
Marek Bel
6437d44991 Fix unable to cut filament, if nozzle is already preheated. 2019-03-01 18:10:06 +01:00
Marek Bel
83e07b5cdf Fix compiler warnings: 
sketch/ultralcd.cpp: In function 'void mFilamentPrompt()':
sketch/ultralcd.cpp:2335:7: warning: enumeration value 'e_FILAMENT_ACTION_none' not handled in switch [-Wswitch]
 switch(eFilamentAction)
       ^
sketch/ultralcd.cpp:2335:7: warning: enumeration value 'e_FILAMENT_ACTION_mmuCut' not handled in switch [-Wswitch]
sketch/ultralcd.cpp:2359:12: warning: enumeration value 'e_FILAMENT_ACTION_none' not handled in switch [-Wswitch]
      switch(eFilamentAction)
            ^
sketch/ultralcd.cpp:2359:12: warning: enumeration value 'e_FILAMENT_ACTION_mmuLoad' not handled in switch [-Wswitch]
sketch/ultralcd.cpp:2359:12: warning: enumeration value 'e_FILAMENT_ACTION_mmuUnLoad' not handled in switch [-Wswitch]
sketch/ultralcd.cpp:2359:12: warning: enumeration value 'e_FILAMENT_ACTION_mmuEject' not handled in switch [-Wswitch]
sketch/ultralcd.cpp:2359:12: warning: enumeration value 'e_FILAMENT_ACTION_mmuCut' not handled in switch [-Wswitch]
sketch/ultralcd.cpp: In function 'void mFilamentItem(uint16_t, uint16_t)':
sketch/ultralcd.cpp:2513:12: warning: enumeration value 'e_FILAMENT_ACTION_none' not handled in switch [-Wswitch]
      switch(eFilamentAction)
            ^
sketch/ultralcd.cpp:2513:12: warning: enumeration value 'e_FILAMENT_ACTION_mmuCut' not handled in switch [-Wswitch]
sketch/ultralcd.cpp:2562:12: warning: enumeration value 'e_FILAMENT_ACTION_none' not handled in switch [-Wswitch]
      switch(eFilamentAction)
            ^
sketch/ultralcd.cpp:2562:12: warning: enumeration value 'e_FILAMENT_ACTION_mmuCut' not handled in switch [-Wswitch]
 2019-03-01 18:07:19 +01:00
Marek Bel
824d11e4b0 Remove "Press the knob to eject filament" message, as it is never shown. 2019-03-01 17:43:28 +01:00
Marek Bel
57cf7ee171 Fix compiler warning: 'lcd_selftest_fsensor' defined but not used 2019-03-01 17:21:13 +01:00
Marek Bel
4c2d4fcf77 Fix compiler warning ultralcd.cpp:4038:10: warning: unused variable 'chars 2019-03-01 17:18:05 +01:00
Marek Bel
a964f996fa Fix compiler warning: variable 'kill_message' set but not used 
kill_message is unused since:

Author:      MRprusa3d <martin.remis@prusa3d.cz>
Date:        4 months ago (11/2/2018 11:03:14 PM)
Commit hash: 73794b56cf

MeshBed Leveling Fail

Z-leveling after MeshBed leveling failing
 2019-03-01 17:08:36 +01:00
Marek Bel
8e51b37d91 Suppress warning: unused parameter. 2019-03-01 16:57:20 +01:00
Marek Bel
22500970ba Remove commented out code, fix formatting. 2019-03-01 16:18:16 +01:00
PavelSindler
85c208f9f4
Merge branch 'MK3' into bad_load_cut 2019-03-01 14:55:55 +01:00
PavelSindler
22c0d6e230
Merge pull request #1577 from mkbel/add_cut 
Add MMU cut filament
 2019-03-01 14:53:12 +01:00
PavelSindler
e14e4be94e
Merge pull request #1575 from mkbel/add_ramming_eject 
Add filament ramming to eject filament.
 2019-03-01 14:21:23 +01:00
PavelSindler
0db721b244
Merge pull request #1559 from mkbel/detect_bad_load 
Move extruder forth and back after filament detected by sensor to det…
 2019-03-01 14:21:04 +01:00
PavelSindler
3cbcbba738
Merge pull request #1510 from mkbel/fix_menu_stack_third_time 
Fix menu stack overrun.
 2019-03-01 14:20:22 +01:00
PavelSindler
250a448d05
Merge pull request #1549 from mionut/7MBL 
7x7 mesh bed leveling with power failure save + pinda temperature filter
 2019-03-01 14:19:52 +01:00
PavelSindler
488497df2c version change 2019-03-01 13:56:03 +01:00
PavelSindler
ca88010018 Revert "version change" 
This reverts commit f14733f2dd.
 2019-03-01 13:54:25 +01:00
PavelSindler
f14733f2dd version change 2019-03-01 13:53:18 +01:00
PavelSindler
e27fdafcec menu switch - initial 2019-02-28 19:42:09 +01:00
PavelSindler
482f8ef01a Merge remote-tracking branch 'mionut/7MBL' into 7x7 2019-02-28 15:54:49 +01:00
Marek Bel
2a005caf42 Add cutter enable to tune menu. 2019-02-27 17:47:51 +01:00
Marek Bel
02a692c5d9 Store cutter enable state in EEPROM. 2019-02-27 17:34:03 +01:00
PavelSindler
ff6eb0b1af
Merge pull request #1568 from MRprusa3d/PFW-795 
preHeat @ filament management
 2019-02-27 13:15:39 +01:00
Marek Bel
4a4eb9962c Cut filament when cutter is enabled and MMU load fails. 2019-02-27 10:42:26 +01:00
MRprusa3d
2f1e968563 "lcd_update_enable()" replacement 2019-02-26 23:17:52 +01:00
Marek Bel
49b1d1cb93 Move prototype to header file. 2019-02-26 18:50:15 +01:00
Marek Bel
a67645fda6 Merge branch 'add_cut' into bad_load_cut 2019-02-26 18:35:55 +01:00
Marek Bel
815231bc26 Add MMU cut filament menu. 2019-02-26 17:58:00 +01:00
MRprusa3d
ff35119ef3 preHeat @ filament management 
another funcionality III / autoLoad
 2019-02-26 17:33:37 +01:00
Marek Bel
5a5a482a59 Rename preprocessor macro K1 to PID_K1 to avoid future conflict with MMU command. 2019-02-26 13:59:44 +01:00
Marek Bel
6c9dd4f272 Add filament ramming to eject filament. 2019-02-26 13:41:28 +01:00
Marek Bel
7a1b47c340 Convert functions mmu_eject_fil_0 to mmu_eject_fil_4 to template function. 2019-02-26 11:11:05 +01:00
Marek Bel
34e2495487 Convert mmu_load_to_nozzle_0 to mmu_load_to_nozzle_4 to template. 2019-02-26 10:32:10 +01:00
Marek Bel
d5c5ed55eb Change formatting. 2019-02-25 11:12:39 +01:00
Marek Bel
8f5fbe569c Merge branch 'MK3' into detect_bad_load 2019-02-25 10:41:26 +01:00
PavelSindler
8e3d52ee6d fix compilation error for MK2.5, make code more readable 2019-02-22 17:15:40 +01:00
PavelSindler
26cab2911f mmu stealth mode 2019-02-22 16:30:54 +01:00
Laurentiu
51827c578f MESH_MEAS_NUM_X_POINTS constant correction to MESH_MEAS_NUM_Y_POINTS 2019-02-22 15:05:06 +02:00
Laurentiu
62875f2e95 MESH_MEAS_NUM_X_POINTS constant correction to MESH_MEAS_NUM_Y_POINTS 2019-02-22 14:35:48 +02:00
MRprusa3d
c0a8d87e9e Merge remote-tracking branch 'my_remote/PFW-795' into PFW-795 2019-02-22 03:16:23 +01:00
MRprusa3d
be0ed46335 preHeat @ filament management 
another funcionality III
 2019-02-22 03:09:50 +01:00
PavelSindler
730e370e78
Merge pull request #1565 from PavelSindler/MK3_for_merging 
version change
 2019-02-21 19:17:03 +01:00
PavelSindler
da28773480 version change 2019-02-21 19:16:24 +01:00
MRprusa3d
e422cc1c26
Merge branch 'MK3' into PFW-795 2019-02-21 15:43:56 +01:00
MRprusa3d
ed93f1b7f0 preHeat @ filament management 
another funcionality IIb
 2019-02-21 15:27:22 +01:00
PavelSindler
16bb6c80c7
Merge pull request #1562 from PavelSindler/mmu_stop_print_fix 
comments
 2019-02-21 14:29:04 +01:00
PavelSindler
6ad5c07e6d comments 2019-02-21 14:28:05 +01:00
MRprusa3d
323071f50a preHeat @ filament management 
another funcionality II
 2019-02-21 13:20:29 +01:00
MRprusa3d
a54c68b874 preHeat @ filament management 
another funcionality II
 2019-02-21 04:45:44 +01:00
Marek Bel
8b858286ac Document. 2019-02-21 02:30:01 +01:00
Marek Bel
326c8492b5 Move extruder forth and back after filament detected by sensor to detect bad load. 2019-02-21 01:19:26 +01:00
PavelSindler
1e729048dc cmdqueue_reset fix 2019-02-21 00:14:49 +01:00
MRprusa3d
da0867cfc5 preHeat @ filament management 
another funcionality
 2019-02-20 03:01:33 +01:00
Laurentiu
afc86a1363 missing ; 2019-02-18 05:50:29 +02:00
PavelSindler
11d19879fc
Merge pull request #1533 from MRprusa3d/PFW-210 
preHeat @ filament load / unload / autoLoad / MMU
 2019-02-15 17:45:38 +01:00
PavelSindler
9d76b6912c merge new changes from upstream 2019-02-15 17:05:39 +01:00
PavelSindler
2b6668b853 merge MK3S branch into MK3 2019-02-15 16:42:40 +01:00
PavelSindler
fec64a9d5e
Merge pull request #1525 from mkbel/improve_mmu_load_failed_2 
Improve mmu load failed 2
 2019-02-15 15:52:35 +01:00
PavelSindler
69ff37729e whitespace 2019-02-15 14:19:30 +01:00
PavelSindler
0f791ce47f mmu needs attention: idler error fix 2019-02-15 14:17:47 +01:00
MRprusa3d
0c1f9b5100 preHeat @ filament management 
target temperature keeping
 2019-02-15 02:25:44 +01:00
Laurentiu
4835b9b220 7x7 points mesh bed leveling 2019-02-14 10:57:58 +02:00
MRprusa3d
80c3420a12
Merge branch 'MK3' into PFW-210 2019-02-14 00:05:50 +01:00
MRprusa3d
ef1f82627e preHeat @ filament load / unload / autoLoad / MMU 
MMU options added
 2019-02-13 23:53:00 +01:00
Marek Bel
a5437cb15b Resend MMU T commands only. 
This solves problem with unload repeated if unload takes too long, second ok reply then triggers Wait end and resumes print.
 2019-02-13 22:29:29 +01:00
Marek Bel
a4032e437e Add MMU wait command after MMU load failed. Resume print when MMU wait command returns OK. 2019-02-13 21:28:21 +01:00
Marek Bel
daaec0ef04 Convert MmuCmd to enum class. 2019-02-13 17:12:35 +01:00
Marek Bel
8e23e7f322 Save some flash by using smaller type for filament. 2019-02-13 16:37:54 +01:00
Marek Bel
9e873ac0f7 Use enum for mmu_cmd instead of plain integer type. 2019-02-13 01:51:39 +01:00
Marek Bel
bb7eeef1f4 Define debug printf and puts functions to make code more readable. 2019-02-12 23:24:23 +01:00
Marek Bel
e1216934ef Save flash by defining underlying type and omitting number value. 2019-02-12 21:53:11 +01:00
Marek Bel
3379fb4866 Convert mmu_state to enum. 2019-02-12 21:43:26 +01:00
PavelSindler
4c76393231 version change 2019-02-12 13:44:50 +01:00
PavelSindler
62500f0b55 version changed 2019-02-12 10:39:09 +01:00
Marek Bel
6c8d9c6fb4 Retry filament load on MMU load failure once. 2019-02-11 23:43:42 +01:00
Marek Bel
d33b24c281 Unload filament after MMU load failed so MMU unit can be controlled by its buttons. 2019-02-11 23:24:55 +01:00
PavelSindler
b85661309f configuration change 2019-02-11 16:38:36 +01:00
PavelSindler
ccc542d74a MK2.5 IR_SENSOR_PIN modified 2019-02-11 14:32:21 +01:00
PavelSindler
cd692f6be6 version change 2019-02-07 19:43:08 +01:00
PavelSindler
065d56b2c6 version change 2019-02-06 23:58:30 +01:00
PavelSindler
38b0e5439b version change 2019-02-06 23:52:24 +01:00
MRprusa3d
b17a961241 MK2.5S 
pin definition for filament sensor connection
 2019-02-06 23:31:48 +01:00
PavelSindler
e028db7bf9 version change 2019-02-06 23:30:01 +01:00
PavelSindler
ff52499bdc extr fan RPM measuring fix 2019-02-06 23:05:13 +01:00
PavelSindler
e432e258dc extr fan RPM measuring fix 2019-02-06 22:56:10 +01:00
PavelSindler
22217a42f7 message change 2019-02-06 21:37:39 +01:00
PavelSindler
a85d8e7f97 message change 2019-02-06 21:36:21 +01:00
PavelSindler
d19c92bca8 welcome message changed 2019-02-06 19:41:17 +01:00
PavelSindler
de9c87c592 welcome message changed 2019-02-06 19:38:52 +01:00
Marek Bel
c704a4b7ab Fix menu stack overrun. 2019-02-06 18:25:45 +01:00
PavelSindler
726d5aa3c3 typo fixed 2019-02-06 16:29:10 +01:00
PavelSindler
63c8a36185 typo fixed 2019-02-06 16:27:44 +01:00
PavelSindler
a220c97f94 Revert "variant files" 
This reverts commit 850d3316b6.
 2019-02-06 16:19:30 +01:00
PavelSindler
2fe8e0670a MK2 build fail fixed 2019-02-06 16:15:19 +01:00
PavelSindler
850d3316b6 variant files 2019-02-06 15:18:12 +01:00
PavelSindler
ef86c78f25 menu item text changed 2019-02-06 14:24:47 +01:00
PavelSindler
1ba046395e fan measurements fix: keep fanSpeedSoftPwm = 255 during measurements, selftest changes 2019-02-06 12:37:18 +01:00
PavelSindler
27d002a46f Merge remote-tracking branch 'robert/MK3-variants' into variants 2019-02-06 09:20:21 +01:00
PavelSindler
860e6f9994 Merge remote-tracking branch 'upstream/MK3' into variants 2019-02-06 09:19:38 +01:00
PavelSindler
fcb7dd90cf
Merge pull request #1505 from MRprusa3d/PFW-210 
preHeat @ filament load / unload / autoLoad
 2019-02-06 09:14:03 +01:00
MRprusa3d
a53d150903 preHeat @ filament load / unload / autoLoad 
autoLoad option added
 2019-02-06 01:58:05 +01:00
Robert Pelnar
93d4128163 Fixed timer2 colission with arduino framework around "tone" function. 2019-02-05 19:08:57 +01:00
PavelSindler
62e253edd0 fanSpeed -> fanSpeedSoftPwm (fixes fan speed menu) 2019-02-05 18:21:44 +01:00
PavelSindler
903028e574 fix fan speed measuring for PWM = 255 2019-02-05 17:46:31 +01:00
PavelSindler
91b12ff64b bed level correction menu fix (menu_item_edit for negative integers) 2019-02-05 16:49:29 +01:00
PavelSindler
f9298b37b8 fan check hotfix (selftest, measuring RPM, fan errors) 2019-02-05 04:02:38 +01:00
PavelSindler
ea20529945 merge changes from upstream 2019-02-04 15:23:39 +01:00
MRprusa3d
5a2df47077 minTemp 
better stability for delay-cutting
 2019-02-04 14:54:25 +01:00
PavelSindler
9a51a7be29 Merge branch 'bed_correction_fix' into variants 2019-02-04 12:47:06 +01:00
PavelSindler
0853ef5d06 Merge remote-tracking branch 'upstream/MK3' into variants 2019-02-04 12:45:28 +01:00
PavelSindler
b4f2dc3b5e Merge remote-tracking branch 'robert/MK3-variants' into variants 2019-02-04 12:41:08 +01:00
PavelSindler
6d5a2ae816
Merge pull request #1499 from MRprusa3d/PFW-210 
preHeat @ filament load / unload
 2019-02-04 12:37:42 +01:00
Robert Pelnar
d2a4cb4c49 Use _delay_ms instead of delay (fix - fast scrolling in sd card menu - temporary solution) 2019-02-04 12:20:07 +01:00
MRprusa3d
fff8fc8a48 preHeat @ filament load / unload 
filament-list correction (PET missing)
 2019-02-04 12:12:35 +01:00
PavelSindler
2f9ab7b185 Merge branch 'dev' into variants 2019-02-04 01:32:24 +01:00
Robert Pelnar
3244c37435 Conditional translation for fan control (FAN_SOFT_PWM), temporary disabled lcd backlight control 2019-02-04 01:32:04 +01:00
PavelSindler
036bd4eb46 Merge branch 'dev' into variants 2019-02-04 01:20:14 +01:00
PavelSindler
6bf8611afa mintemp: delay cutting lines removed 2019-02-04 01:19:58 +01:00
PavelSindler
71e4459cc9 Merge branch 'dev' into variants 2019-02-04 01:14:11 +01:00
PavelSindler
fba207e0ec crash detection: don't wait for heater if target temp = 0; new priting type 2019-02-04 01:13:46 +01:00
PavelSindler
5324181bf7 maximum bed level correction value enlarged from 50um to 100um and is now used in menus and mesh bed leveling itself 2019-02-03 20:56:14 +01:00
PavelSindler
454a087fb3 Merge branch 'dev' into variants 2019-02-01 21:24:38 +01:00
PavelSindler
4444b155f1 M600: prevention of blob; massage changed when autoload is active 2019-02-01 21:08:34 +01:00
PavelSindler
97aaf919a3 Merge remote-tracking branch 'upstream/MK3' into dev 2019-02-01 18:12:59 +01:00
Robert Pelnar
79449a8eaf Conditional translation for fan control (FAN_SOFT_PWM), temporary disabled lcd backlight control 2019-02-01 13:29:50 +01:00
PavelSindler
2cb3b99981 Merge branch 'dev' into variants 2019-01-31 18:04:38 +01:00
PavelSindler
4f67a9569c dont show filament sensor in extruder info menu 2019-01-31 18:03:56 +01:00
PavelSindler
6342b6032c Merge remote-tracking branch 'upstream/MK3' into variants 2019-01-31 10:18:41 +01:00
PavelSindler
491dbf5ebd
Merge pull request #1493 from MRprusa3d/PFW-210 
preHeat @ filament load / unload
 2019-01-31 10:15:59 +01:00
MRprusa3d
921b6993ee preHeat @ filament load / unload 2019-01-31 05:21:53 +01:00
PavelSindler
9926468c91 Merge remote-tracking branch 'upstream/MK3' into variants 2019-01-30 17:26:45 +01:00
PavelSindler
b24cd58a50
Merge pull request #1491 from XPila/MK3-bed_fast_pwm 
HW pwm fix
 2019-01-30 12:52:44 +01:00
Robert Pelnar
9890c60fe5 HW PWM fix 2019-01-30 00:06:12 +01:00
PavelSindler
bbdb2c1597 Merge branch 'dev' into variants 2019-01-29 15:34:56 +01:00
MRprusa3d
19fd05bb46
Merge pull request #1490 from PavelSindler/menu_update 
menu update
 2019-01-29 13:29:27 +01:00
PavelSindler
1fa9913029 include printers.h 2019-01-28 21:54:44 +01:00
PavelSindler
220437316b
Merge pull request #1485 from XPila/MK3-bed_fast_pwm 
Mk3 bed fast pwm
 2019-01-28 21:14:01 +01:00
PavelSindler
60acdd23c5 variants 2019-01-28 21:12:38 +01:00
PavelSindler
29e156b26d printer types updated 2019-01-28 19:48:46 +01:00
PavelSindler
25d54d43aa menu update 2019-01-28 19:41:02 +01:00
Marek Bel
6d2358125a Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2. 2019-01-28 19:29:31 +01:00
PavelSindler
dd4d8e1277 calibrate z endstop update 2019-01-28 19:23:19 +01:00
PavelSindler
af348aa8ba compilation error fix: pin for LCD brightness 2019-01-28 17:56:44 +01:00
PavelSindler
83510ed489 check_for_ir_sensor 2019-01-28 17:27:16 +01:00
PavelSindler
8fe2d1de9a Merge remote-tracking branch 'my_dev/MK3' into dev 2019-01-28 17:15:22 +01:00
PavelSindler
8f039263d5 variant files and version 2019-01-28 17:14:24 +01:00
PavelSindler
1742dbdb9e Merge remote-tracking branch 'my_dev/MK3' into dev 2019-01-28 16:21:57 +01:00
PavelSindler
2ea34d21e7
Revert "Revert "Mk3 bed fast pwm"" 2019-01-28 14:20:31 +01:00
Robert Pelnar
1b4e49b5ac Fixed fancheck and include in TimerRemaining.h 
this commit enables fast pwm mode for bed (SYSTEM_TIMER_2 definition uncomented)
fancheck fix verified with selftest
 2019-01-28 12:57:33 +01:00
PavelSindler
0514306bed selftest fixed 2019-01-28 11:09:41 +01:00
PavelSindler
7889305702 merging changes from upstream 2019-01-28 11:00:42 +01:00
PavelSindler
41f103c28f
Revert "Mk3 bed fast pwm" 2019-01-28 10:53:51 +01:00
PavelSindler
c6e6df404c
Merge pull request #1482 from mkbel/IR_fsens_selftest 
Ir fsens selftest
 2019-01-28 10:39:12 +01:00
Robert Pelnar
eea755496b Conditional translation for SYSTEM_TIMER_2 because we want to have posibility to switch between old/new implementation. 
Timing functions (millis, micros and delay) replaced in whole source, defined in Marlin.h.
This commit enables original implementation (SYSTEM_TIMER_2 undefined)
Verified with passed complete wizard process.
 2019-01-27 22:48:51 +01:00
Robert Pelnar
9a1e914637 fix - bed heating durring selftest 2019-01-27 18:14:01 +01:00
Robert Pelnar
434a723151 Timing functions 'micros' and 'delay' replaced in whole source with 'micros2' and 'delay2' 2019-01-27 17:37:27 +01:00
Robert Pelnar
fc0b55b213 Timing functions micros2 and delay2 + fix of delay_keep_alive(). 2019-01-27 17:23:53 +01:00
Marek Bel
aaa2670ef8 Remove redundant enum numbering. 2019-01-25 20:14:29 +01:00
Marek Bel
b167896c6d Convert lcd_selftest_screen parameter int _step to enum class testScreen screen. 2019-01-25 20:00:12 +01:00
PavelSindler
ab2a25cd3f Revert "Fast PWM for bed - newer set HEATER_BED_PIN to 1" 
This reverts commit 50bcfae183.
 2019-01-25 18:38:46 +01:00
PavelSindler
31236e411e Revert "Fast PWM for bed - set pwm value from soft_pwm_bed variable." 
This reverts commit e612eb2a17.
 2019-01-25 18:38:36 +01:00
PavelSindler
76db58605b Revert "Fast PWM for bed - timer2 used as system timer" 
This reverts commit 0963c889f0.
 2019-01-25 18:37:23 +01:00
Marek Bel
6d1256eaad Internationalize "Calibrating home". 2019-01-25 18:06:30 +01:00
PavelSindler
fc1491670f mmu_idler_sensor_detected -> ir_sensor_detected 2019-01-25 18:03:05 +01:00
PavelSindler
6b6a3d7d5f MMU_IR_SENSOR_PIN -> IR_SENSOR_PIN 2019-01-25 18:01:17 +01:00
PavelSindler
7e3a1c7d45 merge changes from upstream 2019-01-25 17:57:24 +01:00
PavelSindler
579fb42be2
Merge pull request #1480 from MRprusa3d/PFW-556 
Pfw 556
 2019-01-25 15:04:26 +01:00
PavelSindler
0d1a7a1774
Merge pull request #1479 from MRprusa3d/PFW-749 
SD card menu
 2019-01-25 14:32:12 +01:00
PavelSindler
661c40ef75
Merge pull request #1472 from mkbel/IR_fsens_selftest 
Ir fsens selftest
 2019-01-25 13:14:18 +01:00
Marek Bel
edc412697c Increase selftest_irsensor() filament nozzle unload temperature to ABS. 
Resume nozzle temperature immediately after unload.
 2019-01-24 21:24:46 +01:00
Marek Bel
68ffa95aa9 Fix axis self-test progress visualization. 2019-01-24 21:06:03 +01:00
Marek Bel
1c4f3259ea Increase heater check minimum expected temperature rises. 
Bed increased from 3 to 10 K.
Nozzle increased from 10 to 30 K.

Measured rises with my MK3 printer:
Bed 26K,
Nozzle 73K.
 2019-01-24 21:02:04 +01:00