666 Commits

Author	SHA1	Message	Date
PavelSindler	987f8969c0	Merge remote-tracking branch 'upstream/MK3' into temp_cal_coordinates_fix	2018-05-30 15:20:40 +02:00
PavelSindler	2561ab9c7d	Merge pull request #786 from XPila/MK3-new_lang ... Mk3 new lang	2018-05-30 14:54:47 +02:00
3d-gussner	dce2d45499	Fixed forgotten comment	2018-05-30 13:35:48 +02:00
Robert Pelnar	4746c77195	New ML support - bootloader support and update proces test	2018-05-29 21:03:47 +02:00
PavelSindler	d307868a90	merge with upstream	2018-05-28 20:38:55 +02:00
PavelSindler	26724c4a48	removed message	2018-05-28 20:31:57 +02:00
PavelSindler	7e79ce8e53	MK3: crash detection for Z axis is active during auto home and mesh bed leveling (normal mode is forced for Z movents); temp cal coordintes corrections; temp cal: xy movents always in safe Z distance from heatbed, Z-axis homing improved	2018-05-28 20:26:15 +02:00
Robert Pelnar	baa66a0887	New ML support - secondary language name, language selection	2018-05-28 17:14:55 +02:00
XPila	28a767b460	Merge pull request #760 from PavelSindler/safety_timer_fixes ... Safety timer not active during filament runout procedure	2018-05-28 13:28:24 +02:00
PavelSindler	58ae70c4e1	Merge branch 'MK3' into MK3-new_lang	2018-05-28 13:22:14 +02:00
Robert Pelnar	15207e4d5e	Linearity correction fix - (eeprom storage changed to byte instead of word) ... +enabled for XYZ axes	2018-05-28 01:47:08 +02:00
Robert Pelnar	55157640c5	New ML support - czech version is working!!! ... postbuild.sh, make_lang.sh - fixed (id and offset calculation) language.c, language.h - fixed (==||==) config.h - reserved space for _SEC_LANG changed Marlin_main.cpp - debug output + hardcoded lang_select(1) //means cz	2018-05-27 15:14:04 +02:00
PavelSindler	2ffb95c72a	bugfix: use absolute coordinates for steel sheet removal position, because there is no homing at the beginning of calibration in case that position is already known	2018-05-24 20:28:00 +02:00
Robert Pelnar	2cf20c8c99	New ML support - migration - fix_source_1.sh script (replace 'MSG_xx' with '_T(MSG_xx)') ... + output + fixed source	2018-05-23 16:37:08 +02:00
Robert Pelnar	da3432e237	New ML support - changed _SEC_LANG reserved space to 10kb, added debug code	2018-05-23 16:11:12 +02:00
Robert Pelnar	f00a9ce636	New ML support - language.c, language.h - code fixed, Marlin_main.cpp - debug output	2018-05-23 15:46:08 +02:00
PavelSindler	0091b41fb5	Merge pull request #744 from PavelSindler/M860_fix ... M860 fix: send busy messages	2018-05-23 13:15:46 +02:00
PavelSindler	137e1c5027	whitespace	2018-05-22 13:33:31 +02:00
PavelSindler	d63a17c696	Safety timer not active during filament runout detection	2018-05-22 13:31:21 +02:00
Robert Pelnar	bd587faab9	New ML support - migration - replaced source, removed original ML support files (backup)	2018-05-22 03:20:03 +02:00
MRprusa3d	83aa710da6	menu returns corrections ... Settings::FilamentSensor & FilamentAutoload removing Calibration::ShowEndStops @ MK3	2018-05-15 20:23:22 +02:00
PavelSindler	c59e9bd6be	M860 fix: send busy messages	2018-05-15 18:27:25 +02:00
Marek Bel	02ecd08786	Convert Time class to template, instantiate LongTimer for longer and ShortTimer for shorter periods.	2018-05-11 16:31:42 +02:00
Marek Bel	e8730c2899	Merge branch 'MK3' into read_xyz_cal ... # Conflicts: # Firmware/ultralcd.cpp	2018-05-10 18:31:31 +02:00
Marek Bel	c359d11858	Do not disable bed heating, when the print is paused. ... Also remove duplicate handleSafetyTimer() call.	2018-05-04 15:21:22 +02:00
MRprusa3d	8a92d9b6a3	MaR::180501b	2018-05-02 23:49:21 +02:00
MRprusa3d	d02333918f	MaR::180501	2018-05-02 22:13:47 +02:00
PavelSindler	420d1079af	terminate temperature calibration in case that Z probing function returns false	2018-04-30 17:51:44 +02:00
PavelSindler	2a57325bd5	Merge pull request #685 from mkbel/add_safety_timer_notice ... Show full screen blocking notification message after heater turned off	2018-04-27 17:24:33 +02:00
PavelSindler	265d4761a3	M861: steps value for 35C	2018-04-27 17:07:10 +02:00
Marek Bel	eced66f0f6	Show full screen blocking notification message after heater turning off by safety timer.	2018-04-27 16:23:20 +02:00
PavelSindler	acd308e3d4	safety timer prolonged to 30 minutes	2018-04-27 14:03:09 +02:00
PavelSindler	e7cf68e038	whitespace	2018-04-26 19:27:07 +02:00
PavelSindler	2dd0d84845	M861: usteps and z_shift variables correction	2018-04-26 19:14:28 +02:00
PavelSindler	9c3e0aab36	M861 update: use signed values	2018-04-26 18:55:08 +02:00
Marek Bel	ae08788c99	Split lcd_service_mode_show_result screens to separate functions. Make them non blocking. Remove global array distance_from_min, pass it as function return value. Make Support submenus returning to Support menu.	2018-04-26 16:36:02 +02:00
PavelSindler	2657d3febd	MK25: SILENT_MODE_NORMAL changed to SILENT_MODE_POWER	2018-04-26 15:12:45 +02:00
PavelSindler	9a6cc8a035	Merge pull request #664 from MRprusa3d/MK3 ... Mk3	2018-04-25 22:20:45 +02:00
MRprusa3d	7e462b3224	Merge branch 'MK3' into MK3	2018-04-25 19:15:36 +00:00
MRprusa3d	0b6644915a	Add files via upload	2018-04-25 18:47:19 +00:00
PavelSindler	d85a8077a8	M115 update	2018-04-25 20:39:10 +02:00
Robert Pelnar	0271ab3643	Meshbedleveling, calibration Z ... check crash Z (MK3) check deviation of Z-probe (>50um == error, all printers) kill with message "debris on nozzle..."	2018-04-25 16:19:16 +02:00
XPila	5bb9451b5d	Merge pull request #658 from XPila/MK3-V3_2 ... Meshbedleveling/MK3 - check crash Z after homeaxis (kill with message…	2018-04-24 20:54:53 +02:00
Robert Pelnar	1553e99d8e	Meshbedleveling/MK3 - check crash Z after homeaxis (kill with message "debris on nozzle...")	2018-04-24 20:12:29 +02:00
PavelSindler	f9d64bdfb1	Merge pull request #655 from mkbel/fix_z_home_point ... Fix z home point	2018-04-24 16:51:57 +02:00
XPila	79b9f736aa	Merge pull request #657 from PavelSindler/temp_cal_update ... Temp calibration update	2018-04-24 15:16:13 +02:00
PavelSindler	8efe66ef99	remove tab	2018-04-24 14:34:49 +02:00
PavelSindler	ffe93b2ca9	whitespace correction	2018-04-24 14:33:48 +02:00
PavelSindler	cc74edfa13	whitespace	2018-04-24 14:23:52 +02:00
PavelSindler	010ceceff9	add another homing after steel sheet is removed; added timeout for pinda cooling; if PINDA doesn't trigger before reaching Z = -1mm, temp. calibration fails	2018-04-24 13:43:51 +02:00
Marek Bel	9bd4d580d7	Use right calibration point. This change is only formal, as both original and new point have same coordinates.	2018-04-23 20:33:25 +02:00
Marek Bel	cccd8246ab	Fix world2machine(const float &x, const float &y, float &out_x, float &out_y) not using input parameters if only WORLD2MACHINE_CORRECTION_SHIFT is applied.	2018-04-23 20:33:14 +02:00
PavelSindler	043c8c66be	waiting for pinda probe cooling	2018-04-19 16:55:00 +02:00
PavelSindler	5791d9f0d8	EEPROM address conflict fix; forcing selftest can happen only in case that we have TMC2130 drivers	2018-04-18 14:17:28 +02:00
Marek Bel	c88f0108af	Fix safety timer. ... Constant parameter greater than 16 bits must by stated as unsigned long.	2018-04-13 19:30:08 +02:00
PavelSindler	b1bb6841c9	Merge pull request #617 from mkbel/fix_farm_reset_1 ... Fix farm reset	2018-04-13 10:02:54 +02:00
Marek Bel	388d6eea36	Fix printer resets in farm mode if command "PRUSA SN" is received and 32U2 processor is not responding.	2018-04-12 18:44:33 +02:00
Marek Bel	08740356b8	Move "PRUSA SN" gcode to separate function.	2018-04-12 18:41:11 +02:00
XPila	6b5835fd9f	Merge pull request #612 from PavelSindler/M861_gcode ... M861 gcode, temp cal is automaticly activated after calibration process	2018-04-11 18:45:57 +02:00
PavelSindler	45d1dbbfe0	temp cal. active set to false	2018-04-11 18:37:07 +02:00
PavelSindler	ce66699340	dont use default temp table for new printers and dont automaticly activate temp. cal. (new pinda probes have different characteristics)	2018-04-11 18:36:38 +02:00
PavelSindler	47eab97d2d	temp. calibration is automaticly activated after calibration process	2018-04-11 18:16:16 +02:00
PavelSindler	0ba7850146	pinda temp table changed back	2018-04-11 17:40:04 +02:00
XPila	c69524c3fb	Merge pull request #611 from XPila/MK3-V3_2 ... removed Configuration_prusa.h	2018-04-11 17:33:37 +02:00
Robert Pelnar	89efcb84b1	removed Configuration_prusa.h ... fixed - compilation for MK25	2018-04-11 17:32:31 +02:00
PavelSindler	919fba531a	wait for PINDA gcode changed	2018-04-11 16:48:47 +02:00
PavelSindler	f70685a92d	Merge pull request #542 from stahlfabrik/MK3_PINDA_TEMP_WAIT_GCODE ... MK3 Add Gcode to wait for minimum PINDA temp	2018-04-11 16:40:21 +02:00
Robert Pelnar	92997204a1	Linearity correction - TMC codes for calibration object, variable stored as uint8, range from 1.03 to 1.20	2018-04-03 12:30:35 +02:00
Robert Pelnar	baade7db61	Removed unused files (ST7565R-dogm, digipot) ... renamed functions digipot_init and digipot_current fixed cond. trans. (menus) fixed variant files - MK25, MK3	2018-03-29 23:01:13 +02:00
Robert Pelnar	363a9d24b3	LiquidCrystal class renamed to LiquidCrystal_Prusa	2018-03-29 17:50:43 +02:00
Robert Pelnar	186e630299	New SPI (do not use Arduino SPI class) ... saved ~300bytes flash, 4bytes ram	2018-03-29 17:42:41 +02:00
XPila	06d5ec5659	Merge pull request #586 from mkbel/ustep_linearity_2 ... Ustep linearity	2018-03-28 19:38:34 +02:00
XPila	ffdd11e960	Merge pull request #587 from XPila/MK3-V3_2 ... Mk3 v3 2	2018-03-28 19:38:20 +02:00
Robert Pelnar	bde097cad1	bugfix - PFW233 - first homing in silent mode Y crash.	2018-03-28 19:22:20 +02:00
Marek Bel	9cb036fbcb	Merge remote-tracking branch 'prusa3d/MK3' into ustep_linearity_2	2018-03-28 19:11:02 +02:00
Marek Bel	40a064ffbc	Add extruder linearity correction to settings menu.	2018-03-28 18:53:37 +02:00
Marek Bel	678cd17e7b	Increase size of EEPROM_TMC2130_WAVE_*_FAC to 16 bits.	2018-03-28 16:13:16 +02:00
Robert Pelnar	cf43b85de9	XYZ calibration - accuracy improvement	2018-03-27 17:27:41 +02:00
PavelSindler	e5faba7226	serial port set back (was previously changed for debugging purposes)	2018-03-15 14:42:03 +01:00
PavelSindler	08ec920d33	merge with upstream	2018-03-15 14:25:17 +01:00
Robert Pelnar	67e90b576a	Disabled force selftest ... XYZ calibration tunning	2018-03-14 16:25:32 +01:00
PavelSindler	863fe1f054	show message that printer is not connected to monitoring on printer start	2018-03-14 15:35:39 +01:00
Robert Pelnar	81cd96b8fe	Variant file for MK25 + cond. translation	2018-03-13 23:02:46 +01:00
Robert Pelnar	ac1a56b493	Merge branch 'MK25' into MK3	2018-03-13 20:43:19 +01:00
PavelSindler	f45f206faf	sorting files disabled in farm mode, start printer status needs reponse from monitoring	2018-03-13 18:50:11 +01:00
PavelSindler	ddeb7b8c84	statistics improved, initial version of function which forces user to connect printer to monitoring	2018-03-13 18:43:42 +01:00
Robert Pelnar	16f9f35451	static_assert replaced with error directive	2018-03-13 16:47:38 +01:00
PavelSindler	0c97f46f25	Merge pull request #551 from XPila/MK3-new_xyz_cal ... New XYZ calibration with image processing	2018-03-13 16:17:50 +01:00
Robert Pelnar	65a91b366d	New XYZ calibration with image processing	2018-03-13 12:55:35 +01:00
Marek Bel	6b08cdeaf1	Safety timer (disable heaters after 15min idle)	2018-03-12 23:45:10 +01:00
Marek Bel	262e800db7	Safety timer (disable heaters after 15min idle)	2018-03-12 23:35:50 +01:00
Christoph Stahl	1df91e5656	MK3 Add Gcode to wait for minimum PINDA temp ... The PINDA temperature compensation is defined for values above 35C. To achieve an optimal first layer consistently it is vital to start the print with a temperature of >= 35C on the pinda probe. When doing a manual pinda temperature calibration it is necessary to begin homing and mesh bed leveling at an exact temperature. This gcode is perfect for this. Example startup code: G28 W ; home all without mesh bed level G0 Z50 ; raise Z to not heat PINDA before bed is warm M104 S215 ; set extruder temp M140 S60 ; set bed temp M190 S60 ; wait for bed temp M109 S215 ; wait for extruder temp G0 X50 Y50 Z0.15 ; this is a good PINDA heating position M666 S35 ; the new code - wait until PINDA is >= 35C G28 W ; home all without mesh bed level G80 ; mesh bed leveling See my forum post later for more explaination on my manual temperature calibration procedure. I will link it then.	2018-03-09 20:46:07 +01:00
Robert Pelnar	976e5a6a19	Temperature calibration - remove steel	2018-03-07 21:45:55 +01:00
Robert Pelnar	e3967e444b	SafetyTimer disabled ... Watchdog disabled watchdog.cpp and watchdog.h source code removed (using directly <avr/wdt.h>)	2018-03-07 14:13:34 +01:00
XPila	55065cf124	Merge pull request #530 from PavelSindler/temp_cal_fix ... steps per unit changed to 0.95%; changed temp cal. warnings, changed …	2018-03-06 18:26:37 +01:00
PavelSindler	27659ae69e	steps per unit changed to 0.95%; changed temp cal. warnings, changed pin for PINDA probe	2018-03-06 16:48:39 +01:00
Robert Pelnar	a6f900fd3c	Merge remote-tracking branch 'upstream/MK25' into MK25 ... # Please enter a commit message to explain why this merge is necessary, # especially if it merges an updated upstream into a topic branch. # # Lines starting with '#' will be ignored, and an empty message aborts # the commit.	2018-03-06 15:11:50 +01:00
bubnikv	2b7e50e45b	Fix of calculate_extrusion_multipliers(). ... This is a fix of a bug made in the previous commit.	2018-03-06 13:03:38 +01:00
Marek Bel	67fd467ebe	Add fail statistics menu item for MK25. ... As there is only filament sensor and no crash and power interruption detection, squash everything into single screen.	2018-03-05 21:42:04 +01:00
bubnikv	fc3af0533a	Fix of calculate_extrusion_multipliers(). ... This is a fix of a bug made in the previous commit.	2018-03-05 21:31:31 +01:00
PavelSindler	0f082fa1f7	Merge pull request #518 from PavelSindler/auto_power_2 ... Auto power mode for MK25	2018-03-05 11:42:00 +01:00
PavelSindler	917689b5ce	tune menu	2018-03-05 01:23:18 +01:00
PavelSindler	1033bd3cf9	info on serial not used	2018-03-05 00:48:10 +01:00
PavelSindler	ca3ba55ca7	initial version	2018-03-05 00:46:24 +01:00
PavelSindler	f1410a37f2	samle z after xyz cal. added, find_point_xy: initial z coordinate after first hit lowered	2018-03-04 23:49:54 +01:00
PavelSindler	8800793dd1	removing debug code	2018-03-04 20:49:34 +01:00
PavelSindler	ad702c6d1f	improved algorithm for first hit, improving sensor point changed, just one calibration round for 4point heatbed (no second run for improving measured coordinates)	2018-03-04 20:21:31 +01:00
PavelSindler	85bc19b77c	force selftest if user upgraded from 3.1.2-RC1 or older fw version	2018-02-27 17:52:13 +01:00
PavelSindler	e249e854da	dev version: print m114 coordinates when z endstop was triggered	2018-02-26 18:25:47 +01:00
Robert Pelnar	73b0349898	fix - Z movement speed in selftest ... conditional translation for linearity correction and variable resolution	2018-02-23 16:31:24 +01:00
Robert Pelnar	49832d4d3b	Safety timer (disable heaters after 15min idle)	2018-02-22 16:46:17 +01:00
bubnikv	cff7b9b396	Unified the volumetric_multiplier with extrusion_multiply to improve ... numeric accuracy and to reduce compuatitonal load. With this commit, the numeric rounding is fixed not only for the M221 G-code (as implemented by the preceding commit), but also for the volumetric extrusion in general. Removed the old FILAMENT_SENSOR code, which served the purpose to modulate the volumetric multiplayer in real time depending on the measured filament diameter. This feature will certainly not be used by Prusa Research in the near future as we know of no sensor, which would offer sufficient accuracy for a reasonable price.	2018-02-22 14:53:10 +01:00
bubnikv	4e3ea41ba4	Fix of a loss in precission when the extruder multiplier is set ... with M221. For 50um layers, the precision loss leads to holes in the print.	2018-02-22 14:52:36 +01:00
PavelSindler	d020f48791	Merge pull request #485 from bubnikv/M221_fix ... Unified the volumetric_multiplier with extrusion_multiply to improve	2018-02-22 14:17:09 +01:00
PavelSindler	03a1bef4ee	Merge pull request #489 from PavelSindler/xyz_corrections_3 ... typo fixed	2018-02-22 13:41:22 +01:00
PavelSindler	819f2fd2b3	typo fixed	2018-02-22 13:40:31 +01:00
XPila	30bb84a7a7	Merge pull request #487 from PavelSindler/eeprom_printer_versions ... Eeprom hw versions	2018-02-22 11:48:26 +01:00
XPila	ad33d3efd1	Merge pull request #488 from PavelSindler/xyz_corrections_3 ... Xyz corrections	2018-02-22 11:48:06 +01:00
PavelSindler	a4b3389dfa	M45 verbosity, steel sheet define, minor modifications in xyz cal	2018-02-22 10:38:46 +01:00
PavelSindler	0323af531d	printer types and motherboard types added to eeprom; min extrude temp lowered because of woodfil	2018-02-22 00:09:12 +01:00
Robert Pelnar	c5175e97ec	Pinout, conditional translation and variant file for MK2	2018-02-21 15:19:34 +01:00
bubnikv	ba49c21f17	Unified the volumetric_multiplier with extrusion_multiply to improve ... numeric accuracy and to reduce compuatitonal load. With this commit, the numeric rounding is fixed not only for the M221 G-code (as implemented by the preceding commit), but also for the volumetric extrusion in general. Removed the old FILAMENT_SENSOR code, which served the purpose to modulate the volumetric multiplayer in real time depending on the measured filament diameter. This feature will certainly not be used by Prusa Research in the near future as we know of no sensor, which would offer sufficient accuracy for a reasonable price.	2018-02-21 11:25:21 +01:00
XPila	74e6ff67d3	Merge pull request #482 from bubnikv/M221_fix ... M221 fix	2018-02-20 19:10:07 +01:00
Robert Pelnar	e2e48bfd71	SD speed test (DEBUG) ... homeaxis - fix set_destination_to_current	2018-02-20 18:50:20 +01:00
bubnikv	ee5949c56e	Fix of a loss in precission when the extruder multiplier is set ... with M221. For 50um layers, the precision loss leads to holes in the print.	2018-02-20 15:30:18 +01:00
Robert Pelnar	57499dc6a0	M350 for E axis (8, 16, 32, 64, 128 microsteps)	2018-02-15 15:40:49 +01:00
Robert Pelnar	79caf3d9c6	tmc2130 optimalization, accurate homing and microstep linearity correction ... dcode D12 removed (no longer needed) homeaxis optimized + xy home calibration support new eeprom variables new lcd menu edit types (byte3, mres, wfac), new menu "Experimental" currents adjusted	2018-02-15 04:17:58 +01:00
PavelSindler	08c59419da	Merge pull request #468 from PavelSindler/M600_currents ... M600 unload current	2018-02-12 09:41:13 +01:00
Robert Pelnar	b08636c554	fix - conditional translation for DEBUG build	2018-02-08 18:56:15 +01:00
PavelSindler	a719ae1b01	whitespace	2018-02-08 16:33:43 +01:00
PavelSindler	ebe1c10423	lower current for unload	2018-02-08 16:32:27 +01:00
PavelSindler	9c4ce3623d	M600 unload current	2018-02-08 16:11:51 +01:00
PavelSindler	29978c4126	TACH_1 must be defined to enable print fan error	2018-02-07 11:10:04 +01:00
PavelSindler	abf956b86f	init	2018-02-06 09:19:27 +01:00
PavelSindler	df754a322b	MK25 merge Xpila's changes	2018-02-06 08:33:26 +01:00
PavelSindler	3bd892135a	erase eeprom section which belongs to M500 gcode in case that version was changed and default settings are used	2018-02-05 16:49:06 +01:00
Robert Pelnar	4d8807e924	bugfix - failstats (total counters) reset to zero for empty eeprom (0xff)	2018-02-02 15:59:37 +01:00
PavelSindler	2dd2c971e2	whitespace	2018-02-01 20:25:19 +01:00
Robert Pelnar	8562235440	MK2.5 port - compilable version	2018-02-01 20:08:11 +01:00
PavelSindler	d92f6292aa	unload with lowered current	2018-02-01 17:43:03 +01:00
PavelSindler	9d8191323b	Merge pull request #440 from XPila/3.1.1-RC6 ... Extruder stealthChop and constant-off-time mode.	2018-01-31 20:21:02 +01:00
XPila	822dd8ff9c	Merge pull request #448 from PavelSindler/eeprom_versions ... EEPROM version change: inform user on LCD that default settings were loaded	2018-01-31 20:06:19 +01:00
Robert Pelnar	adc69eda18	PINDA temp. calibration warning messages.	2018-01-31 17:03:33 +01:00
Robert Pelnar	4c5618c371	failstats - reset "last print" counters ... card - new member variable "paused" (bool)	2018-01-31 15:09:36 +01:00
Robert Pelnar	daaac2fb88	fail stats	2018-01-30 19:49:40 +01:00
Robert Pelnar	210b97d16d	New fail stats (global, last print), crashdetection X and Y separated	2018-01-30 13:10:36 +01:00
PavelSindler	88f248cb77	Inform user that hardcoded default settings were loaded (EEPROM version change)	2018-01-30 11:31:44 +01:00
PavelSindler	cbcfcee48f	PID cal. is not sending OK periodically, print fan error pauses print in octoprint (not disconnecting), initialize serial line when swithing in settings menu	2018-01-25 15:23:11 +01:00
XPila	556205d993	Merge pull request #432 from PavelSindler/invalid_gcodes ... invalid / unknown gcodes reported on serial	2018-01-24 00:12:47 +01:00
XPila	975ed14cb6	Merge pull request #431 from PavelSindler/fan_error_resume ... SD card long pause update	2018-01-24 00:12:33 +01:00
XPila	b2ba72ffcd	Merge pull request #411 from PavelSindler/typo_fixed ... typo fixed	2018-01-24 00:10:28 +01:00
XPila	777dcf072b	Merge pull request #430 from bubnikv/MK3_fsensor_fullrate ... Optimization of the filament sensor.	2018-01-24 00:10:00 +01:00
PavelSindler	70ff22571f	minor change	2018-01-23 20:04:18 +01:00
PavelSindler	3adedb558b	invalid / unknown codes reported on serial	2018-01-23 20:01:02 +01:00
PavelSindler	64a709c097	removed temporary debuging code	2018-01-23 19:14:52 +01:00
PavelSindler	05e0abbd9d	startFileprint delayed	2018-01-23 19:11:04 +01:00
bubnikv	44dc12005f	Optimization of the filament sensor.	2018-01-23 16:47:42 +01:00
PavelSindler	c38458eb67	init	2018-01-23 16:21:43 +01:00
XPila	09e0c566e8	Merge pull request #420 from bubnikv/MK3_stepper_blocking ... Mk3 stepper blocking	2018-01-23 13:15:59 +01:00
bubnikv	69f97e0ec3	Separated the "Unknown" build from the "Development" build. ... Documented purpose of the various build types.	2018-01-22 17:41:05 +01:00
bubnikv	a94e266cf1	Documented CPU load and frequency of the following interrupts: ... 9. ISR(INT7_vect) - Fan signal interrupt 26. ISR(M_USARTx_RX_vect) - USB to serial RX 37. ISR(USART1_RX_vect) - R-PI serial RX	2018-01-20 16:20:51 +01:00
bubnikv	815dfcb14b	Implemented a stepper timer reset after a long blocking cli() ... or DISABLE_STEPPER_DRIVER_INTERRUPT(). If this is not done, the stepper interrupt would likely overflow, leading to a maximum 32ms delay before the stepper interrupt wakes up. In addition, the stepper timer overflow error would be reported by the debug builds.	2018-01-20 15:39:21 +01:00
bubnikv	9e534c1990	Minimize risk of stepper routine interrupt blocking by reorganizing ... the routine to move the G-code line length from the command queue to the planner queue.	2018-01-20 14:37:22 +01:00
bubnikv	330f1576fc	Support for debug builds: ... A build version and repository is displayed on the welcome screen, D-codes, stack overflow check and stepper timer overflow check are enabled in the debug mode.	2018-01-18 16:24:25 +01:00
PavelSindler	b5f8b1d97c	Merge pull request #412 from PavelSindler/debug_version ... initial message for debugging fw version	2018-01-18 13:18:16 +01:00
PavelSindler	e60cb2a79e	unload filament sequence same as in M600	2018-01-17 21:54:34 +01:00
PavelSindler	4843f2c48e	initial message not shown on release candidate versions	2018-01-17 17:38:34 +01:00
PavelSindler	bfa675c1a4	initial message for debugging fw version	2018-01-17 16:00:19 +01:00
PavelSindler	b73520bcea	successfull -> successful	2018-01-17 14:40:37 +01:00
PavelSindler	fbf947b75c	maiden eeprom: tmc2130_mode is set to normal	2018-01-16 16:56:58 +01:00
XPila	026f68fd6f	Merge pull request #404 from PavelSindler/xyz_fixes ... xyz homing hotfix, xyz cal. status changed	2018-01-16 01:39:57 +01:00
XPila	9efa1d3a03	Merge pull request #403 from PavelSindler/M600_update ... timeout fix and unload message shortened	2018-01-16 01:39:18 +01:00
PavelSindler	06c6cc119b	xyz homing hotfix, xyz cal. status changed	2018-01-16 01:00:09 +01:00
PavelSindler	d8117eab66	timeout fix and MSG_UNLOAD_SUCCESSFULL message shortened	2018-01-15 17:39:42 +01:00
Robert Pelnar	981a681e52	Temperature ISR synchronization, M600 - faster unload	2018-01-15 17:29:07 +01:00
XPila	87ffb0b193	Merge pull request #400 from PavelSindler/M600_update ... M600 update	2018-01-15 15:27:41 +01:00
PavelSindler	9e7686b77f	unload changes reverted back	2018-01-15 11:35:49 +01:00
PavelSindler	c36af887b7	M600 has timeout for nozzle, different procedure for unload	2018-01-15 11:30:28 +01:00
Robert Pelnar	9aedaa8fe7	build 146 ... hard limits fsensor overflow fix	2018-01-14 23:59:43 +01:00
PavelSindler	8bd84ba4fd	Merge pull request #396 from XPila/MK3 ... Mk3	2018-01-12 22:08:50 +01:00
bubnikv	82304a2268	Slight optimization of the fan speed interrupt routine by accessing ... the Arduino millis() without locking interrupts.	2018-01-12 21:16:29 +01:00
Robert Pelnar	ebf6d08fae	Crash detection - message on lcd (PFW-115)	2018-01-12 21:02:49 +01:00
PavelSindler	1fbed53200	initial	2018-01-12 20:01:22 +01:00
bubnikv	cfae8f859d	Merge branch 'MK3' into fw_versions	2018-01-11 16:58:47 +01:00
PavelSindler	087532085f	development fw versions has initial message for warning	2018-01-11 15:50:26 +01:00
Robert Pelnar	0d269261e4	PFW-110 - load filament - beep when loading finished.	2018-01-10 18:50:16 +01:00
Robert Pelnar	43010b30b4	Build 143f ... Crashdetection improoved, blocking temperature ISR fixed, limits for silent mode adjusted.	2018-01-09 19:54:07 +01:00
Robert Pelnar	0a2087c1cb	build 143e ... Linear advance disabled Max feedrate reduced to 200mm/s Silent max accel reduced to 984mm/s^2 some debug logs removed, tmc_init - log message fixed	2018-01-04 18:08:22 +01:00
Robert Pelnar	8a5ba89a9c	Missing serial characters debuging ... disabled fan ISR disabled fsensor ISR disabled linear advance build 143b	2018-01-02 20:55:33 +01:00
Michal Průša	734639c1da	Unload filament tweak ... unload filament now has longer and faster slow retract.	2017-12-29 17:53:12 +01:00
Phil Dubach	7fb1234855	Turn off bed heater after temp calibration ... After finishing the temperature calibration, turn off the bed heater right away, before waiting for the user to acknowledge completion.	2017-12-28 23:47:27 -08:00
Michal Průša	f71f133e80	power panic polished ... Retraction set correctly to have minimum missing line Z motor current not lowered that drascialy Extruder motor turning off instantly Beeping added to the end	2017-12-28 23:26:06 +01:00
Michal Průša	f1c741d027	Filament autoloading improved and minor tweaks ... Filament autoloading now acts like normal loading (Error message pops out if nozzle too cold, Printer asks if should extrude more when done loading) Autoloading now unable to turn on when filament sensor is turned off or not responding Color not right changed to color not correct to avoid slight confusion	2017-12-28 18:59:57 +01:00
Robert Pelnar	bd58718d9d	dummy "ok" response ... build 139 (RC4)	2017-12-28 02:45:05 +01:00
Robert Pelnar	e064133a04	Merge remote-tracking branch 'upstream/MK3' into MK3 ... # Please enter a commit message to explain why this merge is necessary, # especially if it merges an updated upstream into a topic branch. # # Lines starting with '#' will be ignored, and an empty message aborts # the commit.	2017-12-28 01:37:13 +01:00
Robert Pelnar	546314fda7	Removed debug messages from serial comunication (octoprint...). ... build 137b	2017-12-27 20:29:24 +01:00
PavelSindler	8f7a50cfcd	Merge pull request #343 from PavelSindler/m110_fix ... M110 fix	2017-12-23 00:04:11 +01:00
PavelSindler	e8477b525c	initial version of M110 fix (port from MK2)	2017-12-22 22:34:57 +01:00
XPila	257b8e9f59	Merge pull request #342 from XPila/MK3 ... Mk3 - RC3	2017-12-22 20:35:15 +01:00
Robert Pelnar	6abba7bfe9	filament autoload - better detection algorithm, autoload in M600 from menu ... unload menu always visible	2017-12-22 20:14:26 +01:00
PavelSindler	7114772784	whitespace	2017-12-22 19:23:11 +01:00
PavelSindler	3aca1271ed	serial resend request always contains OK	2017-12-22 18:54:55 +01:00
PavelSindler	6f7a2ba263	Merge pull request #340 from PavelSindler/MK3_for_merging ... removed some serial line error messages	2017-12-22 13:35:33 +01:00
PavelSindler	1917b6a1d7	removed some serial line error messages which caused that octoprint changed status	2017-12-22 13:27:04 +01:00
PavelSindler	33d715616f	Merge pull request #339 from PavelSindler/MK3_for_merging ... setup function	2017-12-21 13:42:22 +01:00
PavelSindler	71bb4022dc	setup function	2017-12-21 13:40:16 +01:00
Robert Pelnar	3ddbac6056	LCD_PWM removed (will be solved other way)	2017-12-21 01:00:49 +01:00
PavelSindler	f227952c0b	Merge branch 'MK3' into MK3	2017-12-21 00:07:01 +01:00
PavelSindler	b8fd058749	selftest fix	2017-12-21 00:03:41 +01:00
PavelSindler	17d9bb205a	selftest tests filament sensor, selftest messages have language variants	2017-12-20 23:40:18 +01:00
Robert Pelnar	a3a0e70eeb	Fsensor autoload enabled menu and eeprom variable	2017-12-20 22:29:41 +01:00
Robert Pelnar	25dd6dd673	new module adc (analog2digital) ... temperature.cpp - adc sampling state machine removed new dcode D9 (adc read/write + simulator) temporarily DEBUG_DISABLE_STARTMSGS because UI blocked SILENT_MAX_FEEDRATE reduced to 172mm/s hexfile removed build number 137x	2017-12-20 13:42:20 +01:00
PavelSindler	31add2e69f	removed 4 bytes from maiden eeprom check as these could be set earlier to 0 by lcd_status_screen function	2017-12-18 19:15:36 +01:00
Robert Pelnar	c6e10fb903	Removed SG software homming ... After Calibration Z enabled minstop (SG and PINDA) TMC2130 code simplification	2017-12-15 14:10:20 +01:00
Robert Pelnar	ca55cf74e2	Merge remote-tracking branch 'upstream/MK3' into MK3 ... # Please enter a commit message to explain why this merge is necessary, # especially if it merges an updated upstream into a topic branch. # # Lines starting with '#' will be ignored, and an empty message aborts # the commit.	2017-12-13 22:58:34 +01:00
Robert Pelnar	356bc403b1	Automatic filament load when printer idle and preheated	2017-12-13 17:39:32 +01:00
Robert Pelnar	cdeb835b5d	Failstat couters initialization ... build number = 131	2017-12-12 23:37:31 +01:00
PavelSindler	fde0efc75c	power panic for absolute E coordinates: initial version	2017-12-12 21:20:59 +01:00
PavelSindler	c1416cbb33	Merge pull request #312 from PavelSindler/wizard ... Wizard: force high power mode during xyz cal. and selftest; wizard for assembled printer	2017-12-12 20:24:15 +01:00
PavelSindler	82dffb688a	force high power mode during xyz cal. and selftest	2017-12-12 20:21:09 +01:00
PavelSindler	997c8de161	shipping prep. reset sets wizard flag, shipping prep wizard improvements	2017-12-12 19:17:37 +01:00
PavelSindler	f8e3c76315	merging new changes from upstream/MK3	2017-12-12 17:14:48 +01:00
Robert Pelnar	0271da3c67	Ambient thermistor - new table (PFW-71) ... Crashdetection disable durring print (PI3M3-42) Stealth mode - better limit values (PI3M3-5)	2017-12-12 15:44:42 +01:00
Robert Pelnar	7204e91ec6	Filament sensor not responding - (PFW-41) ... build number = 130	2017-12-11 18:17:25 +01:00
PavelSindler	20de899d25	Merge branch 'MK3' into sort_files	2017-12-11 11:50:47 +01:00
Robert Pelnar	9dba7dcd1f	DISABLE_M42_M226 = +56 bytes RAM (because of stack overflow) ... build 127	2017-12-09 19:31:27 +01:00
PavelSindler	868aacc7d5	turn on second serial line from settings menu	2017-12-08 16:56:06 +01:00
PavelSindler	071873b38a	init; last merged file: Marlin_main.cpp	2017-12-06 17:48:16 +01:00
PavelSindler	44218a1b53	incomplete file check ported from MK2: initial version	2017-12-06 14:55:53 +01:00
Robert Pelnar	58f8fdb51b	Automatic filament load in M600	2017-12-05 18:37:03 +01:00
Robert Pelnar	0de584c213	bugfix UVLO - extruder position from stepper	2017-11-29 02:08:15 +01:00
Robert Pelnar	9413eca52c	UVLO recover E absolute mode ... build number 119	2017-11-28 23:41:58 +01:00
XPila	1da1eaea01	Merge pull request #117 from PavelSindler/m600 ... M600: wait for user before unloading filament	2017-11-28 22:45:57 +01:00
Robert Pelnar	1863819e39	pat9125 reinit when fsensor enabled from menu.	2017-11-28 22:44:58 +01:00
PavelSindler	020a7ec257	unload filament can be repeated	2017-11-28 19:04:43 +01:00
PavelSindler	c0112f05e1	M600: wait for user before unloading filament	2017-11-28 18:28:53 +01:00
PavelSindler	211725c946	dont show temp cal message, dont save uvlo flag to eeprom if printing from USB	2017-11-27 18:30:16 +01:00
Robert Pelnar	7c8de94778	filament unload - initial ... lower currents for power panic	2017-11-27 15:54:36 +01:00
Robert Pelnar	533418d63e	opravene nezadouci resetovani watchdogem ... powerpanic Z shift = 0.64mm (misto 1.92mm) teplotni kompenzace default = ON	2017-11-27 14:43:56 +01:00
XPila	60930beb52	Merge pull request #108 from PavelSindler/power_panic ... Power panic works with folders	2017-11-27 07:27:17 +01:00
Robert Pelnar	1113124bde	PINDA calibration and precalibrated characteristics.	2017-11-27 07:09:53 +01:00
PavelSindler	42b533b5d8	first working version	2017-11-27 06:20:51 +01:00
PavelSindler	a40c759ee7	First run: show calibration status messages in case that user refused to use wizard	2017-11-27 02:03:42 +01:00
PavelSindler	5a77113fb5	init	2017-11-27 01:59:47 +01:00
PavelSindler	7de187d813	if user dont confirm live adjust Z by pressing the knob, save last live adjust value to eeprom	2017-11-27 00:17:45 +01:00
PavelSindler	4c7cc5520e	"confirm nozzle clean" message re-added	2017-11-26 21:26:36 +01:00
Robert Pelnar	e5fee387db	Fixed bug - unload filament restarts the printer.	2017-11-26 17:14:39 +01:00
Robert Pelnar	f2e9bdef24	Fsensor synchronization and triggering improved ... Watchdog implemented (4s interval, triggered from manage_heater) Stallguard sensitivity for XY decreased by 1 Extruder current adjusted to 5.5kg force Build number = 111	2017-11-24 21:53:35 +01:00
Robert Pelnar	213ee43cc9	Merge usptream ... Crashdetection fixed pl language removed (because of low flash capacity) build number = 110	2017-11-22 08:41:52 +01:00
PavelSindler	ae6a0b4d29	Initial message changed. Needs to be updated in bootlader.	2017-11-21 14:16:55 +01:00
Robert Pelnar	b8525f8043	Print class printf function (experimental, disabled by default) ... LiquidCrystal VT100 escape codes (EraseScreen, CursorHome, ...) Stream support for lcd and uart, fprintf and printf (stdout=uartout) Dcodes enabled, code reduced, printf used Splash screen with esc codes	2017-11-20 20:09:54 +01:00
Robert Pelnar	aee62750e7	Build 109	2017-11-16 22:03:36 +01:00
XPila	279ea79bf6	Merge pull request #86 from PavelSindler/keepalive_messages ... host keep alive messages	2017-11-16 20:53:09 +01:00
XPila	2a85de48ea	Merge pull request #88 from XPila/MK3 ... Mk3	2017-11-16 20:52:46 +01:00
Robert Pelnar	ee2f927148	Build Number = 108 ... FSensor log can be enabled with D9125L1 Selftest menu PINDA D codes	2017-11-16 20:51:50 +01:00
PavelSindler	16a7adfe33	merging with upstream	2017-11-15 15:45:26 +01:00
PavelSindler	91d125369e	keepalive messages initial version	2017-11-15 15:09:29 +01:00
PavelSindler	19d89b37b5	Merge pull request #83 from PavelSindler/lin_adv_fix ... Lin adv. fix from MK2 fw	2017-11-15 11:53:39 +01:00
PavelSindler	9e2533ecdf	Support menu translated and fixes, snmm M600 long beep fix	2017-11-14 16:10:10 +01:00
PavelSindler	4d9780a3c6	Merged lin adv. fix from MK2	2017-11-14 13:57:32 +01:00
XPila	dfe3541d2b	Merge branch 'MK3' into MK3	2017-11-13 18:48:19 +01:00
Robert Pelnar	01de834e0d	SG_THR_X = 2, holding currents == running currents ... Farm preheat menu dcode D5 - read/write/erase FLASH dcode D6 - bootloader update test (for new stk500-prusa) _NO_ASM - MINGW simulator support fixed bug - "Fil. sensor [on/off]" menu Build number = 107	2017-11-13 18:45:11 +01:00
PavelSindler	eda0c6bd39	english version of xyz: place/remove steel sheet; wait for cooling down removed,	2017-11-13 17:09:26 +01:00
PavelSindler	5707f8b14e	Merge remote-tracking branch 'upstream/MK3' into wizard	2017-11-13 14:39:14 +01:00
PavelSindler	fbbcc27f1a	X max lowered to 250, XYZ/Z calibration: Z top coordinate changed, changes in xyz cal. because of stell sheet, still not final version	2017-11-12 11:30:06 +01:00
XPila	55325a5a32	Merge branch 'MK3' into MK3	2017-11-07 17:15:27 +01:00
PavelSindler	2e68770e62	initial version - messages missing (will not compile)	2017-11-07 16:49:04 +01:00
PavelSindler	c36b7be90c	SUPPORT_VERBOSITY initial version	2017-11-07 11:36:41 +01:00
PavelSindler	461675b806	Merge pull request #78 from PavelSindler/4point_xyz_cal ... 4point xyz cal.	2017-11-07 10:02:32 +01:00
michalprusa	967594edf0	Added G-CODE "PRUSA FAN" to report RPM of both fans	2017-11-03 20:27:52 +01:00
Robert Pelnar	877c8a3978	TMC2130 configuration in eeprom (not finished). ... Extruder and Z holding currents same as running currents. M600 filament unload speed = 3500 (PFW-22). FSensor - algorithm changed (reset error couter instead of decrement) build number = 106	2017-10-30 15:45:29 +01:00
PavelSindler	1ee6016fa0	Merge remote-tracking branch 'upstream/MK3' into 4point_xyz_cal	2017-10-30 11:48:45 +01:00
Robert Pelnar	bd7c3d08f3	Marlin_main - lineending CRLF -> LF	2017-10-27 17:07:02 +02:00
PavelSindler	c4d7b801b9	Initial version. XYZ cal works, but bed ref. points coordinates must be checked.	2017-10-27 16:12:37 +02:00
PavelSindler	d37c925bc0	Merge branch 'MK3' into print_fan_speed	2017-10-26 18:04:38 +02:00
PavelSindler	f4d5d891df	measuring pulse width: initial version	2017-10-26 17:42:27 +02:00
Robert Pelnar	cddb0eafb8	PAT9125 - sampled only Y value, new debug code D9125. ... FSensor - synchronous sampling and new algorithm build number = 103	2017-10-24 19:45:15 +02:00
Robert Pelnar	8734961e0e	M114 now reports also actual extruder position, ... PAT9125 HWI2C (Wire) support, fsensor implementation into separate file build number = 102	2017-10-22 22:42:45 +02:00
michalprusa	c3585bc696	Automatic recovery typo fix ... Failures statistics in eeprom	2017-09-26 14:14:17 +01:00
michalprusa	5ff28682be	Automatic recovery after crash is detected	2017-09-26 11:48:46 +01:00
Robert Pelnar	b475d11bdb	Maker Faire brainstorm 2.0 (2) ... Automatic recover after short power loss (according to heatbed temperature drop) Adjusted crashdetection - TMC2130_TCOOLTHRS_X and TMC2130_TCOOLTHRS_Y = 450 to be enabled at low speed !!!ALL FEATURES TESTED AT THIS POINT!!!	2017-09-26 06:11:42 +02:00
Robert Pelnar	89121e6e34	Maker Faire brainstorm 2.0 ... Added filament sensor and crash detection to EEPROM Added crash-detection counters display disable directive Added Restore/Save print directive Added crash detection and filament sensor settings to Tune menu	2017-09-26 04:30:10 +02:00
Robert Pelnar	73cc1c9c8a	initial state of crash detect and filament sensor is ON ... slowed down return speed from crash detect after home Added babystep apply after return from crash detect (don’t know if it’s accurate) Added D10 to set machine to XYZ correctly calibrated Added resume debug directive to mask additional menu item	2017-09-26 03:21:33 +02:00
Robert Pelnar	39f6e746dc	Crashdetection tunning.	2017-09-26 01:43:56 +02:00
bubnikv	c6e9896257	Changed the homing routine to avoid crashing into the right end stop.	2017-09-25 15:20:39 +02:00
bubnikv	b0ca2477c8	Modified homing procedures for the X & Y axes using the Trinamic stall guard ... to run against the end stop with a repeatable velocity. Slightly reduced the collision detection sensitivity.	2017-09-24 00:07:32 +02:00
bubnikv	b58dcf33d0	Removed a test snippet, which broke the power panic recovery.	2017-09-23 20:52:22 +02:00
Robert Pelnar	f2f74ebddf	Powerpanic Z correction improved.	2017-09-23 20:36:10 +02:00
Robert Pelnar	e11ae8bdbf	Soft homing + fixed homing in silent mode.	2017-09-23 20:01:37 +02:00
Robert Pelnar	480838a0a1	Fixed homing (mbl and babystep - crashdetection recovery work fine now).	2017-09-23 16:35:01 +02:00
Robert Pelnar	89acf29247	Silent/High Power mode switching with crashdetection.	2017-09-23 15:01:31 +02:00
Robert Pelnar	d2ff47dac8	Crashdetection	2017-09-22 23:06:52 +02:00
Robert Pelnar	df1aa85526	Crashdetection + configuration file.	2017-09-22 19:28:32 +02:00
bubnikv	522b438ef5	Power panic: When panicking, move the X carriage to the bed side fast.	2017-09-22 16:44:00 +02:00
bubnikv	a8297369b2	Merge branch 'MK3' of https://github.com/prusa3d/Prusa-Firmware-DEV into MK3	2017-09-22 15:43:56 +02:00
bubnikv	23b4fa6c0d	Some fixes / improvements of the power panic: ... 1) Fix of an order of SD card function calls on recover: First set position, then restart the print. 2) Some convenience improvements: On panic, the X axis moves to the edge to avoid oozing into the print. 3) On recovery, move Z up if the head is too low to make it easier for the user to clean the print head.	2017-09-22 15:43:39 +02:00
PavelSindler	37d7740e42	Merge pull request #47 from PavelSindler/MK3 ... fan check turn off, saving to eeprom with offset and levels, fan kickstart,2nd heatbed version, fans check modified	2017-09-22 14:39:52 +02:00
bubnikv	72ab17f585	Further fixes of the power panic and g-code & planner queues.	2017-09-22 13:44:10 +02:00
PavelSindler	6eb57da770	fan check can be turned off from support menu, saving parameters to eeprom with offset and different levels, fan kickstart,2nd heatbed version, fans check modified	2017-09-21 15:20:02 +02:00
Robert Pelnar	1409bd633c	Power Panic - new method of sd_position calculation.	2017-09-21 05:35:41 +02:00
Robert Pelnar	9b901bd3f5	XY homing repeatibility - move by 160um from margin.	2017-09-21 04:55:30 +02:00
Robert Pelnar	4cae00741e	MAKER FAIRE ... filament sensor: runout detection tuning, save/restore print silent mode: safe mode selection durring printing and after homing	2017-09-21 01:52:28 +02:00
Robert Pelnar	e34d816004	Recover print	2017-09-20 16:04:02 +02:00
Robert Pelnar	2c3387e71d	Recover print - simple solution	2017-09-19 21:38:47 +02:00
Robert Pelnar	9c92025cf2	Serial port ECHO bug fix - for clear eerpom farm_mode will be set to false. In farm_mode is second serial port the main port and data received from this port is send to serial port 0 (debuging feature).	2017-09-15 16:34:34 +02:00
Robert Pelnar	9105de073c	Cmdqueue code in separate files, debug codes for read/write eeprom and ram, PWM amplitude for Y axis stealtchop mode increased to 210.	2017-09-14 16:19:49 +02:00
Robert Pelnar	14519aa7ee	Support the second serial (original commit 7d2d6c6fdc on MK2 by AndreeeCZ)	2017-09-13 13:35:22 +02:00
Robert Pelnar	0685439e36	Cmd queue modification. Added CMDHDRSIZE=2, each command readed from SD is preceded by one byte variable containing original length.	2017-09-12 19:20:41 +02:00
Robert Pelnar	d9cdb1da60	Ambient thermistor - table and conversion function, extruder motor changed back to 200steps type, extruder resolution changed to 32usteps.	2017-09-06 16:04:50 +02:00
Robert Pelnar	8ec316773f	PINDA thermistor and ambient thermistor.	2017-09-05 14:02:35 +02:00
Robert Pelnar	f563618b1c	PINDA thermistor + extruder current adjust.	2017-08-30 21:56:48 +02:00
Robert Pelnar	1e705198e0	LCD backlight brightnes pwm control and lcd blinking.	2017-08-21 17:23:30 +02:00
Robert Pelnar	d63045fdb3	TMC2130 stallguard improovment - axis load monitoring, autocalibrate Z.	2017-08-21 13:06:17 +02:00
Robert Pelnar	683784c4c7	PAT9125 I2C, hardware SG homing ... separate pin configuration file for each board changed board codes: RAMBO =100, MiniRambo1.0 =200, MiniRambo1.3 = 203, Einy03 =303, Einy04 =304	2017-08-17 15:23:34 +02:00
XPila	a41a836ef0	Merge branch 'MK3' into MK3	2017-07-12 17:54:41 +02:00
Robert Pelnar	cd48d5b4ff	TMC2130 stallguard SW homing improvement - steps delta instead of delay (loop count), new function tmc2130_home_restart, always enable endstops durring homing.	2017-07-12 17:36:50 +02:00
michalprusa	281ae26a5e	Merge branch 'MK3' into MK3-michal	2017-07-07 10:43:39 +02:00
michalprusa	e6c7a29693	filament sensor tweaked for 400 step motor. ... On/OFF switch for filament sensor	2017-07-07 10:42:36 +02:00
XPila	76477edf63	Merge pull request #20 from XPila/MK3 ... SG homing - fixed bug - set sg_homing_delay to zero before move.	2017-07-07 07:47:07 +02:00
Robert Pelnar	21974ae07a	SG homing - fixed bug - set sg_homing_delay to zero before move.	2017-07-07 07:45:36 +02:00
michalprusa	52554d72c4	PAT9125 finally able to turn off	2017-07-07 07:34:35 +02:00
michalprusa	7ffa42f43a	PAT9125 init result print	2017-07-07 05:41:41 +02:00
michalprusa	ea17fa56d7	Merge remote-tracking branch 'origin/MK3-michal' into MK3-michal ... # Conflicts: # Firmware/ultralcd.cpp	2017-07-07 05:00:23 +02:00
XPila	82c1fc978b	Merge branch 'MK3' into MK3-michal	2017-07-07 04:51:01 +02:00
michalprusa	e23f34339e	Power panic improved by turning off Z steppers ... Dubug outputs for filament and fan rotation sensors moved to special menu Support->Extruder info XYZ calibration debug now available only while not printing	2017-07-07 04:50:00 +02:00
XPila	c1f6646d08	Merge pull request #16 from XPila/MK3 ... pat9125 filament sensor	2017-07-07 04:46:45 +02:00
Robert Pelnar	ec7678a25f	pat9125 filament sensor ... sg homing - bug fix + homing multiple axes simultanously (AXIS_MASK)	2017-07-07 04:45:09 +02:00
michalprusa	87ff9db76e	Merge remote-tracking branch 'origin/MK3' into MK3-michal	2017-07-07 02:12:18 +02:00
michalprusa	06fe85e9ee	Linear Advance	2017-07-07 01:58:02 +02:00
PavelSindler	2ea8e11eea	power panic: extrusion to stabilize pressure, waiting for temperature in homing position	2017-07-06 23:01:59 +02:00
PavelSindler	e521831245	status message during print recovery	2017-07-06 19:31:18 +02:00
PavelSindler	c9d7b65c02	updated z recovery in power panic, added test to main menu	2017-07-06 19:09:06 +02:00
PavelSindler	21f068b37a	changed Z axis recovery in power panic	2017-07-06 17:09:35 +02:00
PavelSindler	8ceca8b9c6	power panic - fixed z axis recovery	2017-07-06 15:52:38 +02:00
XPila	78f7923ab2	Merge pull request #10 from XPila/MK3 ... Changed jerks, disabled oversampling, debug code, commands for seting…	2017-07-06 13:07:37 +02:00
Robert Pelnar	2b24e9ceb3	Changed jerks, disabled oversampling, debug code, commands for seting pwm_ampl and pwm_grad (M917, M918), changed configuration files	2017-07-06 13:06:07 +02:00
XPila	458dfa80f6	Merge branch 'MK3' into MK3	2017-07-06 12:55:30 +02:00
PavelSindler	16fffed52d	current feedrate and fan speed stored to eeprom in power panic, number of blocks (linear movements) in planner serve for counting SD card recover position, print fan speed error limit prolonged to 15s	2017-07-05 15:04:43 +02:00
PavelSindler	2c102f8580	fixed SD card restore position (power panic)	2017-07-05 09:16:33 +02:00
PavelSindler	ef7a302626	power panic: Z axis is lowered in position where print starts (is recovered)	2017-07-04 20:58:44 +02:00
Andre Sklenar	9e3d608ba0	Merge branch 'MK3' of github.com:prusa3d/Prusa-Firmware-DEV into MK3	2017-07-04 16:25:53 +02:00
Andre Sklenar	5ab57ab2ad	Init LCD ASAP for a nice UX	2017-07-04 16:25:30 +02:00
Robert Pelnar	b8025e63e6	DEBUG defines, variant files for MK3	2017-07-04 16:23:28 +02:00
PavelSindler	a8678cb2fd	recover print	2017-07-04 11:31:39 +02:00
PavelSindler	d05e62813a	Merge remote-tracking branch 'upstream/MK3' into MK3 ... sync with upstream	2017-07-03 14:08:39 +02:00
PavelSindler	4ae5751d95	added debug messages for serial	2017-07-03 14:08:27 +02:00
Robert Pelnar	176c32de91	TMC2130 stallguard homing - sg_thrs_x and sg_thrs_y - command M916, lcd_silent_mode_set_tune	2017-07-03 10:39:56 +02:00
Robert Pelnar	e09f0c64c7	TMC2130 tuning, silent/high power mode	2017-07-03 07:43:50 +02:00
Robert Pelnar	c4307c7373	TMC2130 tunning, overtemp	2017-07-03 00:11:42 +02:00
PavelSindler	17074e1d25	saving/restoring filename and current position in bytes to eeprom, UVLO changed	2017-07-02 21:01:23 +02:00