3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5,415 Commits 1 Branch 1 Tag 249 MiB
5024fc4be7
Commit Graph

639 Commits

Author SHA1 Message Date
bubnikv
479f716625 Improvements in the manual layer width editor. 2016-12-21 16:00:41 +01:00
bubnikv
955bc957ba New supports now do rafts at least to the extent the test cases run through. 
New supports enabled, old supports will go away soon.
 2016-12-20 12:19:13 +01:00
bubnikv
6582182e0c Adapted to the new ClipperUtils.hpp interface by @alexrj 2016-12-13 19:22:23 +01:00
bubnikv
1ea958158a Support for user definable variable layer thickness, the C++ backend. 2016-12-12 17:53:38 +01:00
Alessandro Ranellucci
9e8dae817d Fixes and improvements to the view selection menu, cherry picked from @alexrj a7693c4719c0e0e0129aea7461706d2ed53a52cc 2016-12-08 14:51:35 +01:00
Alessandro Ranellucci
86c8207d31 Ported make_perimeters() and infill() to C++/XS, use pure C++ threads, cherry picked from @alexrj 66591bcc556c01572ec7519b1f8cb4ee2d430685 2016-12-08 14:24:40 +01:00
bubnikv
695c92fb00 CLIPPER_OFFSET_SCALE was made a power of two, the scaling functions 
inside ClipperUtils are now using bit shifts instead of multiplication
by doubles, which makes the scaling precise.

Removed the scale parameter from all offset functions.

Modified the safety offset to calculate offset per polygon instead
of over all polygons at once. The old way was not safe and very slow,
sometimes this meant a kiss of death for supports for example.
 2016-11-28 17:33:17 +01:00
bubnikv
0d20a81354 Log support through boost::log 2016-11-24 13:44:51 +01:00
bubnikv
39679f9518 Missed this one at the last check-in. 2016-11-20 12:59:29 +01:00
bubnikv
79f5a16536 Reverted the perimeter generator to not save the perimeter areas. 
These could be calculated from the fill areas if needed.
On the other side, the non-classified (non-split) fill areas are stored
now for use in the "ensure vertical wall thickness" feature,
also the non-split fill areas are re-used when recalculating the infills.
This is safer than trying to stitch the fill region together from the
classified fragments.

Modified the "ensure vertical wall thickness" feature to use the non-split
fill areas instead of perimeter areas for the calculation
of non-supported regions. This is cheaper as the fill areas contain
roughly half the edges.
 2016-11-17 23:22:59 +01:00
bubnikv
c3af189045 Reduced some compiler warnings. 2016-11-16 22:09:00 +01:00
bubnikv
4460b5ce50 re-wrote PrintObject::detect_surfaces_type() to C++, 
Fixed some cracks in the fill surfaces created by rounding all surfaces inside detect_surface_type().

Fixed https://github.com/prusa3d/Slic3r/issues/12
Bridging-Angle not optimal

Extended the "Ensure veritcal wall thickness" mode (merged with the original discover_horizontal_shells function), but this a work in progress. Already Slic3r with "ensure vertical wall thickness" produces less spurious infills inside solids.
 2016-11-10 19:23:01 +01:00
bubnikv
22ca927f12 Reworked the bridge detector to allow searching a single bridging 
direction over multiple regions. This allows a single bridge to be
drawn over holes, which are too close to each other to allow
for separate bridges.
Fixes Bridging-Angle not optimal
https://github.com/prusa3d/Slic3r/issues/12

Re-allowed adaptive infill line width for solid infills. The adaptive
infill line width works in some circumstances, see Issue #15,
but the original implementation often changed the line width too
aggressively. The current implementation limits the line width change
to 20%.
Fixes Gaps between infill and perimeter leads to errors in laydown on following layer
https://github.com/prusa3d/Slic3r/issues/15
 2016-11-08 09:59:25 +01:00
bubnikv
aac968162b Unit test to verify whether Slic3r would hang when croaking from 
a C++ exception handler. This is an unfortunate error in some
Strawberry Perl distributions.
 2016-11-06 17:42:36 +01:00
bubnikv
bfb336df0c Refactored Print::validate() method to not throw an exception, but 
to return a string with an error message instead. This was necessary
to avoid a hang-up on some Strawberry Perl distributions, when
a perl "croak" function is called after a C++ exception is caught.
 2016-11-05 02:23:46 +01:00
bubnikv
6217622865 Hopefully a fix of https://github.com/prusa3d/Slic3r/issues/11 
Replaced eval { die } construct with a bool return value indicating
success or failure of an automatic arrangement of parts on the print bed.

Don't know exactly what is happening here, but throwing a "die" inside
a XS function and then catching it inside an eval {} block is suspcious.
 2016-11-04 15:03:51 +01:00
bubnikv
483a658144 Method ExtrusionEntity::polygons_covered() and derived were split 
into polygons_covered_by_width() and polygons_covered_by_spacing().

Bugfix of ExtrusionLoop::split_at(const Point &point),
where the split ExtrusionPaths were not initialised correctly.
 2016-11-04 00:10:35 +01:00
bubnikv
7b6b609df1 ExtrusionEntity and derived classes: Documented, short methods made 
inline for efficiency and readability, grow() renamed to polygons_covered().
 2016-11-03 10:24:32 +01:00
bubnikv
95ede7c4b8 Rewrote Fill2.pm to C++, deleted Perl infills for good. 
Removed dependency on Perl Math::PlanePath module.
Fixed compilation with Visual Studio and SLIC3R_DEBUG: Visual Studio older than 2015 does not support the prinf type specifier %zu. Use %Iu instead.
C++11 move semantics enabled.
 2016-11-02 10:47:00 +01:00
bubnikv
4e66ed81d2 Fixed the fill density for rectilinear, triangular and cubic infills. 
Initial implementation of the "infill link maximum distance" feature.
Parts of the perimeter connecting two infill lines will be dropped,
if longer than a given threshold.
 2016-10-27 17:03:57 +02:00
bubnikv
4524ecf66b by alexrj: Always convert strings to UTF-8 before passing them to XS 2016-10-24 14:08:22 +02:00
bubnikv
1fb57e439e Defined the +-* operators on Pointf. 
Removed the deprecated VibrationLimit feature.
Added triangle infill.
The Prusa3D fork of Slic3r has been marked as "Slic3r Prusa Edition"
with menus pointing to the prusa3d/slic3r github release page
and Prusa3D drivers downloads page.
 2016-10-21 16:53:42 +02:00
bubnikv
15d3e94a66 Unified the creation of paths of debugging output files 
pointing to a predefined output directory.
 2016-10-21 10:18:01 +02:00
bubnikv
f788f50b5a Disabled asserts in the release build (-DNDEBUG). 
Added a safe variant of offset(const Slic3r::ExPolygon...), which offsets each loop separately.
New functions "remove_sticks" to remove zero area parts of polygons.
New functions "remove_small" and "remove_degenerate" for polygon clean up.
Extended the C++ supports, those are not finalized yet though.
 2016-10-20 13:04:23 +02:00
bubnikv
53907a9cfe Fix of a crash when setting a viewport over an empty platter. 
Exported bounding box 'empty' method to perl.
 2016-10-18 16:44:05 +02:00
bubnikv
7d7f093120 C++ supports sketched, but not finalized yet. Slic3r is still using 
the old Perl supports, but this time with the C++ fillers.
 2016-10-16 16:30:56 +02:00
bubnikv
3a81e6bee4 Bugfix of bottom bridges. If close regions shall be closed by bridges, 
these regions are grown to anchor the bridge lines to the bottom surface.
The grown regions may overlap. In that case the regions are now merged
before the bridging direction is calculated for the merged region.
 2016-09-30 15:23:18 +02:00
bubnikv
403329db49 Misc bugfixes. 2016-09-26 13:58:47 +02:00
bubnikv
790b640521 Visualization of fill surfaces. 2016-09-26 13:56:24 +02:00
bubnikv
e0d1aa8a1a Collect the perimeter surfaces when generating perimeters. 
The perimeter surfaces are later used for performing infill
below overhangs and to maintan configured vertical wall thickness
at sloping surfaces.
 2016-09-26 13:44:23 +02:00
bubnikv
620c6c7378 Ported from the playground branch. Various documentation and optimization. 2016-09-13 13:30:00 +02:00
bubnikv
f518e0675c Initial commit of the new Pressure Equalizer, the EdgeGrid 
signed distance field structure.
The EdgeGrid is used to avoid placing the seams on overhangs.
 2016-09-12 16:25:15 +02:00
bubnikv
9fcc8fe9ae Meged with release_candidate_1_3 2016-09-12 11:29:39 +02:00
Alessandro Ranellucci
9e8022f6f6 More refactoring to medial axis and gap fill, more robust 2016-05-20 17:03:57 +02:00
Vojtech Bubnik
d022493297 Merge remote-tracking branch 'upstream/master' 2016-05-03 22:05:31 +02:00
bubnikv
f767ce816b Optimized and improved rectilinear fill. 2016-04-13 20:45:44 +02:00
Chow Loong Jin
3d73fbf5fd Use float for elapsed_time 
When accumulating elapsed_time from many moves that take less than 1
second, elapsed_time does not get incremented because (unsigned int)0.9
= 0.
 2016-04-13 01:13:42 +08:00
bubnikv
ed83ff37f8 Simulation of extrusion in a plane, useful for finding out under / over-extruions. 2016-04-11 17:10:13 +02:00
bubnikv
9716ee8eca Interface to a filler, ported from Perl to C++. 2016-04-11 17:09:15 +02:00
bubnikv
7da68c91a5 Vojtech likes to use Sublime on Windows to get the wheels rolling. 2016-04-11 17:05:58 +02:00
Alessandro Ranellucci
660b56acb5 Fixed type error 2016-03-26 12:21:54 +01:00
Alessandro Ranellucci
7c8b71012c Force the 'nearest' strategy for starting skirt loops 2015-12-21 15:02:39 +01:00
Alessandro Ranellucci
934bd43e35 More refactoring on Config XS bindings 2015-12-16 12:58:06 +01:00
Alessandro Ranellucci
3c862836f2 Refactored the Config XS bindings 2015-12-16 12:33:19 +01:00
Alessandro Ranellucci
e2f2761a00 One more fix for compilation 2015-12-08 11:07:45 +01:00
Alessandro Ranellucci
4913e90e10 Remove any Perl related code from libslic3r 2015-12-08 00:39:54 +01:00
Alessandro Ranellucci
3fac8cd77e Large refactoring of the Config classes 2015-12-07 19:39:49 +01:00
Alessandro Ranellucci
7e1fac8f76 Separate libslic3r code from slic3r application code 2015-12-06 12:54:01 +01:00
Alessandro Ranellucci
e2b203ba8d Disable screensaver while projecting (untested on Windows) 2015-12-04 21:25:45 +01:00
Alessandro Ranellucci
7523550066 Try to fix compilation on older Perls 2015-12-02 19:57:03 +01:00
Alessandro Ranellucci
1bebe6097b Make test happy 2015-12-02 19:39:16 +01:00
Alessandro Ranellucci
4f8a18bbad Ported Layer::maker_perimeters() to XS 2015-12-02 19:32:57 +01:00
Alessandro Ranellucci
3a9cf91f83 Ported a couple more methods to XS 2015-12-02 18:29:33 +01:00
Alessandro Ranellucci
ed75219215 Ported mode Model methods to XS 2015-12-02 18:06:18 +01:00
Alessandro Ranellucci
dfce3a3138 Ported _arrange() and arrange_object() to XS 2015-12-01 21:51:16 +01:00
Alessandro Ranellucci
9febb10bd7 Smoother manual control movements 2015-11-08 10:20:47 +01:00
Alessandro Ranellucci
9a8724cdd0 More compilation changes for Win32 2015-11-06 11:51:24 +01:00
Alessandro Ranellucci
9f9b5afedb Merge branch 'master' into sender 2015-11-05 11:04:01 +01:00
Alessandro Ranellucci
61f0a9e4da Replace the flip word with mirror. #3060 2015-11-04 23:11:30 +01:00
Alessandro Ranellucci
f8d2c69713 Fixed compilation warnings and a potential bug in MotionPlanner, as reported in #3054 2015-11-04 20:50:32 +01:00
Alessandro Ranellucci
9ee6829ebc Implemented connection timeout in C++ 2015-11-02 20:36:36 +01:00
Alessandro Ranellucci
fc1a7471cf Several improvements to the print job queue 2015-11-02 01:18:05 +01:00
Alessandro Ranellucci
9b21ac877a Merge branch 'master' into sender 
Conflicts:
	Build.PL
	lib/Slic3r.pm
	xs/MANIFEST
	xs/src/libslic3r/PrintConfig.hpp
 2015-11-01 19:12:13 +01:00
Alessandro Ranellucci
9fcec10737 Finished porting LayerRegion to C++ 2015-10-26 23:24:46 +01:00
Alessandro Ranellucci
6ac79e3ed6 Ported make_perimeters() to C++ 2015-07-23 16:27:21 +02:00
Alessandro Ranellucci
b4515cf695 Finished porting PerimeterGenerator to C++ 2015-07-23 15:53:02 +02:00
Alessandro Ranellucci
3e739b87da Finished porting Slic3r::GCode to XS (speed boost!) 2015-07-02 20:24:16 +02:00
Alessandro Ranellucci
0ad4296aaf Ported GCode::set_extruders() and GCode::change_layer() to XS 2015-07-02 19:33:08 +02:00
Alessandro Ranellucci
9a17efc480 Use GCodeWriter for path segments (refactoring) 2015-07-02 19:14:55 +02:00
Alessandro Ranellucci
fbd640fdc5 Ported GCode::extrude_path() to XS (speed boost!) 2015-07-02 18:57:40 +02:00
Alessandro Ranellucci
b025efe729 Ported GCode::travel_to() to XS 2015-07-02 15:12:04 +02:00
Alessandro Ranellucci
a6f4c8e567 Ported GCode::set_extruder() and OozePrevention 2015-07-02 15:02:20 +02:00
Alessandro Ranellucci
b14290b9f6 Make tests happy 2015-07-02 14:29:20 +02:00
Alessandro Ranellucci
5571144c0e Ported Slic3r::GCode::needs_retraction() to XS 2015-07-01 23:14:40 +02:00
Alessandro Ranellucci
b4019bb438 Ported more Slic3r::GCode methods to XS 2015-07-01 23:00:52 +02:00
Alessandro Ranellucci
801f629fdc Ported Slic3r::GCode storage to XS 2015-07-01 21:47:17 +02:00
Alessandro Ranellucci
280f3f38d7 Ported Slic3r::GCode::OozePrevention storage to XS 2015-07-01 21:01:42 +02:00
Alessandro Ranellucci
b43dd92766 Ported Slic3r::GCode::Wipe storage to XS 2015-07-01 20:57:16 +02:00
Alessandro Ranellucci
bf9cd1b8e6 Ported Slic3r::GCode::AvoidCrossingPerimeters to XS 2015-07-01 20:14:05 +02:00
Alessandro Ranellucci
580d28d071 Finished porting PlaceholderParser to XS 2015-07-01 19:35:22 +02:00
Alessandro Ranellucci
249088b4f8 Ported Config::setenv() to XS 2015-07-01 18:18:25 +02:00
Alessandro Ranellucci
f361d8ad43 Ported PlaceholderParser::apply_env_variables() to XS 2015-07-01 17:56:38 +02:00
Alessandro Ranellucci
7f70da97b4 New experimental autospeed feature. #2810 2015-05-31 22:04:32 +02:00
Alessandro Ranellucci
13b7316807 Merge branch 'master' into sender 
Conflicts:
	Build.PL
	lib/Slic3r/GUI/MainFrame.pm
 2015-05-28 18:05:36 +02:00
Alessandro Ranellucci
7d81aee62f Added the [scale] placeholder. #2791 2015-05-02 21:59:15 +02:00
Alessandro Ranellucci
d6d7880507 Ported Slic3r::Geometry::arrange() to C++/XS 2015-04-29 19:19:07 +02:00
Alessandro Ranellucci
5eb3bc52ef Ported ModelObject::rotate() and ModelObject::flip() to XS, as well as axes constants 2015-04-16 21:22:04 +02:00
Alessandro Ranellucci
be2f46ca68 Ported Layer::merge_slices() to XS 2015-04-16 20:44:55 +02:00
Alessandro Ranellucci
1f8ef2a63c Fixed regression introduced by the recent PerimeterGenerator refactoring causing spiral vase not to be correctly skipped on multi-loop layers. Includes regression test. #2761 2015-04-12 20:16:27 +02:00
Alessandro Ranellucci
8654537e55 Use support material layer height for raft layer instead of object layer height. #2723 2015-03-09 19:36:23 +01:00
Alessandro Ranellucci
d8ee9dd5f5 Limit first object layer height correctly when using a larger support material extruder. #2722 2015-03-09 19:27:57 +01:00
Alessandro Ranellucci
6cab5668e3 Restore correct ordering of concentric infill loops, preventing them from being reordered during G-code generation 2015-03-09 18:28:07 +01:00
Alessandro Ranellucci
d2172b4383 Merge branch 'master' into sender 2015-03-06 22:15:43 +01:00
Alessandro Ranellucci
722e94513c Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled 2015-03-06 09:56:58 +01:00
Alessandro Ranellucci
ba6ae12635 Change end_program() to postamble() 2015-02-15 17:09:17 +01:00
Alexander Rössler
f2fa8cb63f added end_program() function to GCodeWriter 2015-02-07 12:36:29 +01:00
Alessandro Ranellucci
3ae6f2630e Merge branch 'master' into sender 
Conflicts:
	Build.PL
 2015-02-01 14:07:32 +01:00
Alessandro Ranellucci
bb3bf28e59 Ported prepare_fill_surfaces() to XS/C++ 2015-02-01 12:43:58 +01:00
Alessandro Ranellucci
8605969dc5 Don't output slic3r:z attribute in SVG for raft layers 2015-01-30 18:45:30 +01:00
Alessandro Ranellucci
e2b1b52679 Added a new Slic3r::Geometry::simplify_polygons() function 2015-01-30 18:33:20 +01:00
Alessandro Ranellucci
c264969962 Bugfix: crash when rendering lines with zero length in 3D preview. #2569 2015-01-25 15:21:45 +01:00
Alessandro Ranellucci
a5c0ffe963 Faster loading of 3D preview and much less memory used 2015-01-24 23:35:29 +01:00
Alessandro Ranellucci
8791f5a493 Cleanup of some method signatures and of XS return types 2015-01-19 18:53:04 +01:00
Alessandro Ranellucci
9f0283f808 Minor issue when dealing with files with empty layers at bottom. #2553 2015-01-18 12:35:05 +01:00
Alessandro Ranellucci
2bbb6c570b Ported toolpaths rendering to C++ 2015-01-18 01:07:22 +01:00
Alessandro Ranellucci
e749f6040f New +Line::intersection_infinite() method 2015-01-16 16:25:39 +01:00
Alessandro Ranellucci
e0a3d2577c Initial work for 3D rendering of toolpaths 2015-01-15 20:06:30 +01:00
Alessandro Ranellucci
18e815d032 More efficient 3D preview of slices 2015-01-15 18:49:07 +01:00
Alessandro Ranellucci
bf02062a67 Bugfix: random but frequent crashes after recent perimeter code refactoring 2015-01-14 22:55:11 +01:00
Alessandro Ranellucci
04aa240265 Only apply perimeter/infill overlap to the endpoints of rectilinear infill (and do that in a more proper way) 2015-01-13 20:55:20 +01:00
Alessandro Ranellucci
9ec7b43ca1 Merge branch 'master' into sender 
Conflicts:
	lib/Slic3r/GUI/Tab.pm
 2015-01-08 22:47:43 +01:00
Alessandro Ranellucci
8f4cbefd0d Lots of improvements to MotionPlanner/avoid_crossing_perimeters. Smoother paths and several edge cases now handled better 2015-01-06 20:52:36 +01:00
Alessandro Ranellucci
2562070232 Refactored the travel/retract/avoid_crossing_perimeters logic. Several edge cases are now handled correctly. #2498 2015-01-06 14:52:03 +01:00
Alessandro Ranellucci
7e82159620 Fixed one more case where only_retract_when_crossing_perimeters didn't apply. #2498 2015-01-06 11:29:34 +01:00
Alessandro Ranellucci
9af43bee52 Handle log, temperatures. Move controller to main tabpanel. More things 2015-01-04 23:18:23 +01:00
Alessandro Ranellucci
3ab4d4b094 Merge branch 'master' into sender 2015-01-04 19:36:28 +01:00
Alessandro Ranellucci
16939b80e6 Implemented priority queue 2015-01-04 18:17:15 +01:00
Alessandro Ranellucci
2c0d216c1a More work on print controller 2015-01-03 23:25:55 +01:00
Alessandro Ranellucci
d8be67c28b Bugfix: Douglas-Peucker used perpendicular distance instead of shortest distance, thus clipping more than it should. #2474 2015-01-03 15:03:53 +01:00
Alessandro Ranellucci
c06ce3b58c Initial work for a controller GUI 2014-12-31 19:10:46 +01:00
Alessandro Ranellucci
29d64107de Merge branch 'master' into sender 2014-12-31 16:25:26 +01:00
Alessandro Ranellucci
494efe65b2 Bugfix: auto-center didn't update the PrintObject copies properly, causing misalignment. #2464 2014-12-29 22:29:24 +01:00
Alessandro Ranellucci
b126f92f41 Finished GCodeSender 2014-12-27 22:58:01 +01:00
Alessandro Ranellucci
005f138ce7 Merge branch 'master' into sender 2014-12-26 01:30:48 +01:00
Alessandro Ranellucci
70601eeb51 Tell what options were changed when prompting user for saving a modified preset. Also, check whether the preset was actually modified by performing a proper idempotent diff. #2165 2014-12-25 17:35:31 +01:00
Alessandro Ranellucci
5a0f4eac8d One more retraction optimization 2014-12-25 11:37:54 +01:00
Alessandro Ranellucci
4848cb7606 Ported PrintObject::bridge_over_infill() to XS 2014-12-24 10:20:55 +01:00
Alessandro Ranellucci
5d3cd792eb Make infill_only_where_needed idempotent. #2198 2014-12-24 01:29:36 +01:00
Alessandro Ranellucci
93507bfd49 Bugfix: only_retract_when_crossing_perimeters was not correctly applied on bottom layer when no bottom solid layers were printed 2014-12-22 11:46:16 +01:00
Alessandro Ranellucci
7253dc699a Some more work on wireframe 2014-12-21 22:52:18 +01:00
Alessandro Ranellucci
21ea100d0e Fixed tests 2014-12-17 01:15:47 +01:00
Alessandro Ranellucci
9264db7ecd Removed useless thing added in e79aa2e81c 2014-12-17 00:52:01 +01:00
Alessandro Ranellucci
c00061678b Use perimeter extruder for brim. #618 2014-12-17 00:45:05 +01:00
Alessandro Ranellucci
e79aa2e81c New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618 2014-12-17 00:34:00 +01:00
Alessandro Ranellucci
fcfb3b98bc 3D object positioning 2014-12-16 01:12:56 +01:00
Alessandro Ranellucci
a82f95e903 Some initial work for 3D slice rendering 2014-12-15 15:19:42 +01:00
Alessandro Ranellucci
9cd0a63331 Refactoring of PreviewCanvas 2014-12-15 01:28:11 +01:00
Alessandro Ranellucci
2f2ae75529 Some incomplete work for moving objects in 3D plater 2014-12-13 22:18:43 +01:00
Alessandro Ranellucci
d1f58cbed5 Objects can be selected in 3D preview now. Double click and right click work as well 2014-12-13 20:41:03 +01:00
Alessandro Ranellucci
ac495e974a Update test 2014-12-12 23:02:28 +01:00
Alessandro Ranellucci
360dee862b Keep model objects aligned to Z = 0 in plater 2014-12-12 22:43:56 +01:00
Alessandro Ranellucci
050f9ff61a Removed two useless methods in Print 2014-12-12 22:43:56 +01:00
Alessandro Ranellucci
e8ab9ac13a Ported Print::bounding_box(), Print::total_bounding_box(), Print::skirt_flow(), Print:skirt_first_layer_height() to XS 2014-12-12 22:43:56 +01:00
Alessandro Ranellucci
c8596c5c58 Limit "Only retract when crossing perimeters" so that retraction is triggered also when crossing the boundaries of a single region. #2298 2014-12-09 01:08:58 +01:00
Alessandro Ranellucci
eb23990d6d Ported PrintObject::total_layer_count() to XS 2014-12-01 00:00:12 +01:00
Alessandro Ranellucci
c7f5753a28 Ported PrintObject::bounding_box() to XS 2014-12-01 00:00:12 +01:00
Alessandro Ranellucci
1fda9e3d50 Ported concave_points() and convex_points() to XS 2014-12-01 00:00:12 +01:00
Alessandro Ranellucci
e8f242ee3f Move toolpaths preview to the plater dialog 2014-12-01 00:00:11 +01:00
Alessandro Ranellucci
11dd67ab34 Initial work for G-code sender and more intensive usage of Boost 2014-11-26 22:30:25 +01:00
Alessandro Ranellucci
634bc09e2c Refactoring: renamed all contains_*() methods to contains() in C++ 2014-11-23 20:14:13 +01:00
Alessandro Ranellucci
5deadc8f12 Refactoring: removed _islands members in Slic3r::GCode 2014-11-23 20:03:16 +01:00
Alessandro Ranellucci
2c64c3dd5b Bugfix: spiral vase was not working when extrusion axis was not E. #2350 2014-11-23 18:59:18 +01:00
Alessandro Ranellucci
6010297465 All std::string variables are now supposed to be UTF-8 encoded. We now embed the std::string typemaps in order to do this. #2282 2014-11-22 22:20:28 +01:00
Alessandro Ranellucci
bf0eb1af0c Refactored ClipperUtils API for a more consistent arguments convention 2014-11-15 23:44:03 +01:00
Alessandro Ranellucci
28466750e6 Ported some minor methods to XS 2014-11-15 23:06:15 +01:00
Alessandro Ranellucci
379cde30e2 Ported Slic3r::BridgeDetector to XS 2014-11-15 22:41:22 +01:00
Alessandro Ranellucci
33fe53fd7c Ported three PrintObject methods to XS 2014-11-13 00:34:56 +01:00
Alessandro Ranellucci
a5df9fb795 Ported ModelObject::split() to XS 2014-11-12 23:50:09 +01:00
Alessandro Ranellucci
334086d605 Bugfix: skirt and brim were not recalculated when objects where just moved in plater 2014-11-12 23:28:42 +01:00
Alessandro Ranellucci
a5787cfb04 Merge branch 'xs-reload-object' 
Conflicts:
	lib/Slic3r/Print.pm
 2014-11-12 22:51:48 +01:00
Alessandro Ranellucci
8b6a8e6307 Ported PlaceholderParser::update_timestamp() to XS 
Note that Slic3r version number is now located in libslic3r.h
 2014-11-09 20:41:43 +01:00
Alessandro Ranellucci
ee3fb7caa2 Ported GCodeWriter to XS (faster G-code export!) 2014-11-09 19:02:45 +01:00
Alessandro Ranellucci
b69caff93c Ported LayerRegion::make_slices() to XS 2014-11-09 16:24:07 +01:00
Alessandro Ranellucci
948793e570 Prettier validation errors 2014-11-09 15:31:40 +01:00
Alessandro Ranellucci
bad0bd8520 Ported Print::validate() to XS 2014-11-09 15:27:34 +01:00
Alessandro Ranellucci
3e4c572164 Ported some methods including add_model_object() and apply_config() to XS 2014-11-09 12:25:59 +01:00
Alessandro Ranellucci
c97cac5bc9 Fixed glitch in commit 9c93e52c8f causing tests failures 2014-11-08 15:02:58 +01:00
Alessandro Ranellucci
9c93e52c8f Workaround Clipper changing point coordinates while performing simplify_polygons(), thus causing a crash in Slic3r. #2306 2014-11-08 12:56:14 +01:00
Alessandro Ranellucci
67f1cdf76f Bugfix: seam_position = random didn't work with a single perimeter. #2179 2014-11-07 23:53:18 +01:00
Alessandro Ranellucci
d645dabcff Ported reload_object() to XS 2014-11-07 20:25:05 +01:00
Alessandro Ranellucci
7f57f007cd Refactoring: moved Slic3r::GCode::Base to Slic3r::GCode::Writer 2014-10-25 10:42:07 +02:00
Alessandro Ranellucci
71ec90a1dd Finish porting the Extruder class to libslic3r 2014-10-21 20:36:52 +02:00
Alessandro Ranellucci
f82e92f498 Merge branch 'gcode-refactoring' 2014-10-21 20:20:28 +02:00
Alessandro Ranellucci
167df0ab87 Refactoring: moved most of the low-level G-code to the Slic3r::GCode::Base class. Cleanup of the retraction and wipe logic. 2014-10-21 20:16:45 +02:00
Alessandro Ranellucci
e521475b7e Refactoring: moved some low-level G-code generation methods to the new Slic3r::GCode::Base class 2014-10-18 17:41:21 +02:00
Alessandro Ranellucci
6b8f03ff1c Bugfix: crash in some circumstances when avoid_crossing_perimeters is enabled. #2266 2014-10-15 00:59:26 +02:00
Alessandro Ranellucci
73b3c06361 Ported more things to XS 2014-09-21 10:51:36 +02:00
Alessandro Ranellucci
5a96bad8c2 Ported some more methods to C++ 2014-08-08 21:48:59 +02:00
Alessandro Ranellucci
b10917806a Ported some Model methods to XS 2014-08-03 20:33:16 +02:00
Alessandro Ranellucci
6adc3477c9 Moved C++ code into new libslic3r directory 2014-08-03 19:42:29 +02:00
Alessandro Ranellucci
7ff13c063f Port PrintRegion::flow() and LayerRegion.flow() to XS 2014-08-03 19:17:23 +02:00
Alessandro Ranellucci
380dd8adfc Ported some methods to XS 2014-08-03 18:41:09 +02:00
Alessandro Ranellucci
30fa055995 Bugfix: medial axis missed some segments. #2144 2014-08-03 15:03:47 +02:00
Alessandro Ranellucci
f462af20f9 Visual preview for bed shape dialog 2014-08-03 00:20:55 +02:00
Alessandro Ranellucci
3ff613d166 Merge branch 'acp-voronoi' 
Conflicts:
	xs/xsp/my.map
 2014-07-26 22:38:35 +02:00
Alessandro Ranellucci
86bad17abb Display skirt and brim in toolpaths preview. Also take support material margin into account when sizing the window. #2169 2014-07-24 18:32:07 +02:00
Alessandro Ranellucci
d9f5fdae72 Bugfix: make_perimeters() was not truly idempotent because prepare_infill() split ->slices into typed surfaces 2014-07-15 19:07:38 +02:00
Alessandro Ranellucci
da4d6cbabb 3D preview of plater 2014-07-13 12:10:34 +02:00
Alessandro Ranellucci
aacc01a56f Store object and volume names in the new 'name' property instead of relying on material id 2014-07-12 11:20:57 +02:00
Alessandro Ranellucci
f82a8475a1 Use AMF object and volume metadata for handling per-object and per-volume settings 2014-07-11 20:09:01 +02:00
Alessandro Ranellucci
d9dc2fda00 Fixed regression causing variable layer heights to be ignored. #2136 
Conflicts:

	xs/xsp/my.map
 2014-07-01 19:49:15 +02:00
Alessandro Ranellucci
67bf99633e Fix compilation under 5.20 (untested). #2109 2014-06-25 14:57:06 +02:00
Alessandro Ranellucci
b9e8fbacb7 Put the Default Extruder option in a less confusing position 2014-06-19 20:07:16 +02:00
Alessandro Ranellucci
4bf23c67bb Bugfix: wrong input validation in set_layer_height_ranges(). #2105 2014-06-19 14:44:50 +02:00
Alessandro Ranellucci
998a4225de Finished implementation of bed_shape in plater 2014-06-16 15:18:39 +02:00
Alessandro Ranellucci
04ed3abd3f Fix compilation on 5.18(?) 2014-06-14 23:12:03 +02:00
Alessandro Ranellucci
e9910a2c0b XYZ mirroring from plater 2014-06-14 21:14:33 +02:00
Y. Sapir
a837e26f51 Translate PlaceholderParser::apply_config to C++. 2014-06-14 00:01:52 +02:00
Alessandro Ranellucci
d9e7a50a6e Partial work for background processing 2014-06-13 11:19:53 +02:00
Alessandro Ranellucci
97231327e0 Have Print::apply_config() return true if any step was invalidated 2014-06-12 09:29:26 +02:00
Alessandro Ranellucci
6194cbf530 Refactoring: new method in Flow for calculating spacing between extrusions having different width 2014-06-12 09:17:37 +02:00
Alessandro Ranellucci
8ee11b3239 Refactoring: keep height in Flow object and calculate spacing on demand 2014-06-12 01:00:13 +02:00
Alessandro Ranellucci
5dcc1eab79 Bugfix: seam_position = aligned failed in certaim circumstances because of faulty concave points detection. Includes regression test 2014-06-11 21:58:41 +02:00
Alessandro Ranellucci
d2ca4c1b13 Some initial work for incremental slicing 2014-06-11 00:15:02 +02:00
Alessandro Ranellucci
5c54acf9ac Use ->ptr() for CoolingBuffer too 2014-06-10 16:17:34 +02:00
Alessandro Ranellucci
3f6360ee8f Finish porting Print classes to XS 2014-06-10 16:01:57 +02:00
Alessandro Ranellucci
ba8148f4ad Merge branch 'printcpp' of github.com:sapir/Slic3r into sapir-printcpp 
Conflicts:
	lib/Slic3r/GCode.pm
	lib/Slic3r/Print.pm
	lib/Slic3r/Print/Object.pm
	lib/Slic3r/Print/Region.pm
 2014-06-10 14:46:40 +02:00
Alessandro Ranellucci
3599bd0bae Distinct extrusion width for external perimeters 2014-06-09 21:22:15 +02:00
Alessandro Ranellucci
7215e66a6a Merge branch 'master' into visilibity 
Conflicts:
	lib/Slic3r/GCode.pm
	xs/MANIFEST
 2014-05-27 00:04:53 +02:00
Alessandro Ranellucci
b02e459c4b Attempt to fix compilation issue 2014-05-26 17:13:24 +02:00
Alessandro Ranellucci
3d25b9030c Bugfix: movement between objects in sequential printing mode was going too far away. #2013 #2007 2014-05-26 15:19:13 +02:00
Y. Sapir
19d18bdd84 Attempt to solve conflict with a3bd1b5 by adding id to PrintObject and using that as a hash key. 2014-05-25 03:00:29 +03:00
Y. Sapir
9247f21ff8 Add missing include "BoundingBox.hpp" to Polygon.xsp. 2014-05-25 00:55:13 +03:00
Y. Sapir
d2e51242d9 Really fix total_used_filament / total_extruded_volume. 2014-05-25 00:53:47 +03:00
Y. Sapir
07dd799967 Fix inherited Layer::Support id and object accessors. 2014-05-25 00:50:49 +03:00
Y. Sapir
b8b8c746d9 Make clear_regions and delete_region methods private (both Print & Layer), and remove from XSP. 2014-05-25 00:11:17 +03:00
Y. Sapir
22b05cb187 Make read-only constructor parameters - private. 2014-05-24 23:50:45 +03:00
Y. Sapir
76738dc66b Remove some more Clone typemaps and add some whitespace. 2014-05-24 23:50:45 +03:00
Y. Sapir
db51e4693d Return NULL values from XS as undef. 2014-05-24 23:50:45 +03:00
Y. Sapir
d06c300926 Add ::Ref classes for every missing C++ class (going by REGISTER_CLASS calls). 2014-05-24 23:50:44 +03:00
Y. Sapir
8da0bded1d Move Print object storage to C++. (along with its subobjects) 2014-05-24 23:50:29 +03:00
Alessandro Ranellucci
a3bd1b5302 New seal_position option that replaces randomize_start, start_perimeters_at_concave_points and start_perimeters_at_non_overhang. The two latter options are now always on by default. A new "Aligned" seal position value has been added, that forces starting points to be aligned when not randomized. #1741 #925 2014-05-22 19:34:49 +02:00
Alessandro Ranellucci
f2c5e799b1 Enforce seam alignment and blend in spiral vase. #2023 2014-05-22 12:28:12 +02:00
Alessandro Ranellucci
254ab29a97 New Point::projection_onto() methods 2014-05-21 20:08:21 +02:00
Alessandro Ranellucci
ad99b2a0fd Fixed one more regression introduced with Model refactoring. Includes regression test 2014-05-15 16:37:18 +02:00
Alessandro Ranellucci
5fe5021fd7 Implemented avoid_crossing_perimeters with VisiLibity 2014-05-13 20:06:01 +02:00
Alessandro Ranellucci
ee2c1c6127 Refactored the Slic3r::GCode logic for speeds 2014-05-13 08:34:21 +02:00
Alessandro Ranellucci
59f0e76da1 Distinct extrusion role for support material interface 2014-05-12 22:59:49 +02:00
Alessandro Ranellucci
69002b8ea2 No tests were covering randomize-start, which was not working anymore after recent ExtrusionLoop refactoring. #2028 2014-05-12 21:49:17 +02:00
Alessandro Ranellucci
27c73f5983 Some fixes after the recent Model refactoring 2014-05-10 16:59:17 +02:00
Alessandro Ranellucci
7ba08c90cf Refactoring to Model API for making it stricter and safer 2014-05-09 14:24:35 +02:00
Alessandro Ranellucci
76a8ec3d9e Replace to_SV_ref() and to_SV_clone_ref() with templated glue functions 2014-05-08 14:52:48 +02:00
Alessandro Ranellucci
6e207d3830 Merge branch 'sapir-modelcpp' 2014-05-08 11:13:21 +02:00
Alessandro Ranellucci
c37ef2f18b New semantics for ExtrusionLoop objects. Early processing of perimeter overhangs for paralellizing such work and making G-code export lighter. Lots of refactoring. This should fix a number of minor bugs, including reversals of perimeter overhangs. 2014-05-08 11:07:37 +02:00
Alessandro Ranellucci
d2d885fc53 Turn ExtrusionLoop into a collection of polylines. Includes some changes to the Polygon API to avoid returning newly allocatd objects 2014-05-07 12:02:09 +02:00
Alessandro Ranellucci
13af16ea24 Use Pointf for origin_translation and pass const refs whenever possible 2014-05-07 00:58:29 +02:00
Alessandro Ranellucci
54a199919b Removed StringMap 2014-05-07 00:22:56 +02:00
Y. Sapir
05b2993769 Translate Model class' storage to C++. 
Some code copied from xs-model branch.

Also:
* Generate ::Ref classes programatically.
* Add separate __REGISTER_CLASS macro
    (for use where forward declaration won't work, i.e. typedefs)
 2014-05-05 16:30:19 +03:00
Alessandro Ranellucci
cb1527f7ef Refactoring: move direction math into a single function. Includes some fixes and adjustments 2014-05-02 18:48:11 +02:00
Petr Ledvina
028ef3a868 Add missing perlglue.hpp to xsp files 
perlglue was missing in some xsp files. If file ordering ib XS.c is changed, header file could be missing. Maybe solves #2000
 2014-05-02 14:08:44 +02:00
Alessandro Ranellucci
0a88492fdc Use a more robust parallelism detection 2014-05-02 13:26:59 +02:00
Alessandro Ranellucci
c81ffc391d Tentative fix for unreproduced compilation error reported 2014-05-02 11:51:07 +02:00
Alessandro Ranellucci
60f640f100 Remove self-intersections before supplying polygon data to polyPartition and rename triangulate2() to triangulate_pp() 2014-05-01 10:37:38 +02:00
Alessandro Ranellucci
98e40d3fe4 Store width and height in ExtrusionEntity objects for debugging purposes 2014-04-29 23:16:16 +02:00
Alessandro Ranellucci
24571612c7 Some minor changes to the newly-ported Extruder class 2014-04-28 22:02:34 +02:00
Alessandro Ranellucci
4c330b6c59 Merge pull request #1968 from sapir/extrudercpp 
Translate Extruder class to C++
 2014-04-28 21:45:53 +02:00
Alessandro Ranellucci
2720000a17 New get_trapezoids() implementation. Maybe heavier but it doesn't fail with some versions of GCC like the one provided by Boost.Polygon. #1965 2014-04-28 20:14:20 +02:00
Y. Sapir
ad03a88733 Add xsp wrapper for Pointf class. 2014-04-28 01:13:50 +03:00
Y. Sapir
e005ff32c4 Replace Extruder::config accessor with Perl wrapper, with C++ option accessors. 2014-04-28 00:49:05 +03:00
Y. Sapir
2565d80679 Replace multitude of Extruder fields with querying a PrintConfig object by id. 2014-04-27 23:43:44 +03:00