3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
14,759 Commits 1 Branch 1 Tag 249 MiB
621610da75
Commit Graph

2732 Commits

Author SHA1 Message Date
Vojtech Bubnik
7c571c1d9d Merge of pull request Add support for RepetierServer #4384 by @docbobo 
with the following refactorings:

1) Removed the "printhost_slug" config from the Printer config
   and from all the Printer config related spots.
2) "printhost_slug" renamed to "printhost_port". Slug sounds nasty.
3) Improved error reporting of RepetierHost class.
4) Refactored for the new "Physical Printers"

Following refactorings were done independently of the Repetier pull request:
1) Removed PrintHost static print config.
2) Clean-up after conversion of print host configuration
   from Printer config to Physical Printer config.
3) Fixed some issues, where the Printer config was still queried for
   host configuration. Vojtech believes that this should not happen
   after the host configuration is converted to physical printers.

Vojtech still feels that more refactoring is needed in regard to porting
the host configuration from Printer profile to the new Physical Printer
profile.
 2020-10-28 09:51:05 +01:00
enricoturri1966
0798fa8185 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-10-27 17:21:41 +01:00
enricoturri1966
128e4cff2d #4982 - Load config data when importing gcode produced by Slic3r and Slic3rPE 2020-10-27 17:18:15 +01:00
enricoturri1966
90c69e6bda #4986 - Fixed remaining print time and SD-percentage calculation not correct (replaces e14c122d12) 2020-10-27 15:50:04 +01:00
Vojtech Bubnik
06c16b085d Snapshots extended to capture and restore sla_print, sla_material, 
physical_printers.
Updated the snapshots dialog to display sla_print and sla_material.
Updated the snapshots dialog to display physical_printer instead of
printer if the physical_printer key is nonempty.
The "physical_printer" key was moved from [extras] to [presets] section
of PrusaSlicer.ini
 2020-10-27 12:48:31 +01:00
Vojtech Bubnik
751ae8e789 Fixed crash in monotonous infill due to some unexpected pinching 
of the inner contour at a single vertical infill line without
pinching the outer contour.
 2020-10-27 09:38:51 +01:00
tamasmeszaros
969ca98b52 Revert "Require minimum version 5.0 of CGAL" 
This reverts commit f3327adf49.
 2020-10-26 14:41:23 +01:00
tamasmeszaros
f3327adf49 Require minimum version 5.0 of CGAL 2020-10-26 14:30:44 +01:00
enricoturri1966
e14c122d12 Fixed percentage value exported into gcode M73 lines 2020-10-26 11:44:38 +01:00
Vojtech Bubnik
ce020781d3 Refactored loading of Get/SetThreadDescription() on Windows: 
These new API functions are not available on Windows 7 and on older Windows 10,
thus they are newly loaded dynamically and the functions using it retur
a bool indicating whether the functionality is supported or not.
Also the OSX variants that are not supported newly return false instead
of throwing an exception.

Fixes #4972 #4974
 2020-10-26 08:09:17 +01:00
Vojtech Bubnik
e1f6bb4a92 Follow up on Add G10 temperature G-code support for the RepRapFirmware flavour. 
Reduced copy / paste.
 2020-10-24 17:32:30 +02:00
David Kocik
64f6499db5 Fix of empty error string. No testing errors for boost::filesystem::permission. 2020-10-23 18:35:32 +02:00
David Kocik
8b647ab41b fix of copy_file_inner 2020-10-23 15:36:32 +02:00
Lukas Matena
8cd13803ca Updated the G10 RepRapFirmware pull request to current master 2020-10-23 13:27:45 +02:00
Lukas Matena
18f72d82b9 Merge branch 'pa_reprap_g10_temperature_support' of https://github.com/ardenpm/PrusaSlicer into lm_g10 2020-10-23 11:42:35 +02:00
David Kocik
cb2f751aed missing header 2020-10-23 11:19:31 +02:00
David Kocik
115cbd4650 aditional information to FAIL_COPY_FILE error message and changed bools controlling Export finished notification 2020-10-23 10:18:14 +02:00
Lukas Matena
5670f5ffb0 Fix couple of build issues on gcc 2020-10-23 07:51:58 +02:00
Vojtech Bubnik
9a4376ddc6 Fix of previous commit 2020-10-22 17:54:32 +02:00
Vojtech Bubnik
b1b7a5ad1b Fix of ironing invalidation. Fixes 
Ironing flag ignored on infill rotate #4937
Ironing does not take effect when you change Top Fill Pattern. #4900
Ironing layer not shown in preview when settings are changed #4510
 2020-10-22 17:36:51 +02:00
YuSanka
0f9faeda98 Fixed conversion from/to imperial units for objects with parts/modifiers 2020-10-22 15:45:17 +02:00
Vojtech Bubnik
d8f45ff1d8 Workarounds and documentation of OSX posix incompatibilities 2020-10-22 14:57:50 +02:00
Vojtech Bubnik
723406dfea Workaround for OSX non-compliant implementation of 
pthread_getname_np / pthread_setname_np
 2020-10-22 14:45:15 +02:00
Vojtech Bubnik
0d2c31d0e4 and again a fix on Windows 2020-10-22 14:35:20 +02:00
Vojtech Bubnik
6e2a5419cc Fixes of previous commit on Posix platforms 2020-10-22 14:29:40 +02:00
Vojtech Bubnik
81b6883710 Thread names shortened to 15 characters to fit Posix norm. 
Added get_current_thread_name()
 2020-10-22 14:11:08 +02:00
Vojtech Bubnik
6531061d09 Support for naming slicer own threads for debugging. 
The following threads are named with this commit:
slic3r_main, slic3r_BackgroundSlicingProcess,
slic3r_tbbpool_xx_yy where xx is a one based index of the TTB thread
and yy is the platform thread ID.
 2020-10-22 13:54:15 +02:00
enricoturri1966
844ec8447d ENABLE_PAN_ROTATE_SCENE_IN_GIZMOS set as default 2020-10-22 11:01:30 +02:00
Vojtech Bubnik
70e44c3e8e Fixed definition of psSlicingFinished to fix notification updates 
after the slicing finishes.
 2020-10-21 14:00:56 +02:00
Vojtech Bubnik
3e50699576 Renamed Line::offset to extend 
Don't use unscaled constants! What if the scaling constant changes
in the future?
 2020-10-20 09:17:26 +02:00
enricoturri1966
68a7e5ce41 Rotating/panning the view, using mouse left/right + CTRL modifier, while any gizmo is active 2020-10-19 15:55:16 +02:00
Lukas Matena
ebcd073fd3 Removed unused include (related to #4912) 2020-10-19 11:16:43 +02:00
Vojtech Bubnik
7896de892b Fix of the "dock" menu on OSX to start a new instance of PrusaSlicer 
in case a single instance is disabled.
Make the "single_instance" enabled by default on OSX initially
to match the platform.
 2020-10-17 09:23:05 +02:00
Vojtech Bubnik
86ee8e7687 Improved matching of Print and Filament profiles after switching the Printer 
profile. The matching has the following priority:

1) Compatible Print profile with the same logical name aka alias.
2) Prefered Print profile with the same layer height.
3) Compatible Print profile with the same layer height.
4) Prefered Print profile.
5) Any compatible profile.

The same logic applies to the selection of Filament profile, only
a filament_type is compared, not the layer height.
 2020-10-16 16:03:31 +02:00
Vojtech Bubnik
d49a98f154 When switching Printer profiles, a profile with the same logical name 
aka alias is searched for first before activating the default
print / filament profile as configured in the printer settings.
 2020-10-16 14:45:54 +02:00
tamasmeszaros
edb8b9f46d Cover various overhang types cumulatively 2020-10-16 11:14:57 +02:00
tamasmeszaros
fb1f3589ed Use rotated bounding box to calculate eccentricity 2020-10-16 11:14:57 +02:00
enricoturri1966
daf1011705 Changed heuristic to clamp toolpaths width 2020-10-16 09:02:37 +02:00
Vojtech Bubnik
a8fda7d2f1 Fixed some more issues in copy / paste of objects and volumes 
due to the layer_height_profile, paint on supports and seam
being stored as an object on its own onto the Undo / Redo stack.
 2020-10-15 17:29:49 +02:00
YuSanka
00a7799341 UnsavedChangesDialog : improvements 
* Added "Remember my choice" checkbox
* Center on the screen and set position in respect to the position of mainframe or settings dialog

Preferences : Added checkboxes for enable/suppress showing of the UnsavedChangeDialog

SearchImGui : close after parameter selection_is_changed_according_to_physical_printers

PhysicalPrinterDialog, SavePresetDialog : Center on the screen
 2020-10-15 16:53:14 +02:00
Vojtech Bubnik
90ddffa83c This broke the SLA support point generator test. Why? 2020-10-15 13:35:45 +02:00
Vojtech Bubnik
c388c42055 Fixed assignment of the slicing timestamp to the slicing finished 
notification.
 2020-10-15 12:02:55 +02:00
enricoturri1966
3fc12fdaaa Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-10-15 10:25:22 +02:00
enricoturri1966
8580ecacca Added option to apply the sequential slider in preview to top layer only or to whole gcode toolpaths 2020-10-15 10:25:13 +02:00
Vojtech Bubnik
19a115260a A little bit cheaper triangle random sampling + documentation. 2020-10-15 07:58:13 +02:00
Vojtech Bubnik
447f4b8303 Polishing of NotificationManager: 
Fixed pairing of PrintObjects with slicing warning notifications.
Removed or commented out dead code.
Added documentation.
 2020-10-14 16:49:06 +02:00
Vojtech Bubnik
e0c5309bc3 wxEVT_CREATE and wxEVT_ACTIVATE is not being called on the main frame 
on application start-up, at least not on Windows.
wxEVT_CREATE was called for some control deep in the Plater, however
the event was delivered to the main frame and only for slicer, not
for G-code viewer. Thus the callbacks for 3D Mouse were not registered
for and the 3D mouse did not work on Windows.

Fixed by calling the callback registration from the first execution
of the Idle function.
 2020-10-14 12:55:07 +02:00
Vojtech Bubnik
8c0b8f89d0 Updated the command line single-instance processing and help text. 
Updated escaping of the command line arguments when passed to the other
instance.
 2020-10-12 17:06:03 +02:00
enricoturri1966
5356b72a86 Tech ENABLE_GCODE_DRAG_AND_DROP_GCODE_FILES set as default 2020-10-12 13:09:04 +02:00
enricoturri1966
f04d9c1806 Tech ENABLE_GCODE_APP_CONFIG as default 2020-10-12 12:38:34 +02:00
Lukáš Hejl
958acad85b Fix another compiler warnings 2020-10-12 00:17:17 +02:00
Lukáš Hejl
caafcf43b0 Fix compiler warning and fix a bug in connecting infill using hooks 2020-10-11 23:31:59 +02:00
Lukáš Hejl
b8d574093d Small rework of connecting infill with perimeters using hooks 
Hooks are preferably generated in the direction of printed perimeters.
Small refactoring of the algorithm. Some parts of the algorithm are better documented.
 2020-10-11 15:45:50 +02:00
Lukáš Hejl
de242f48cb Refactoring of the adaptive infill using hooks 2020-10-11 03:46:11 +02:00
Lukáš Hejl
cd2881e14e Orient hooks in the direction of the adjacent extrusion line 2020-10-10 22:38:22 +02:00
Lukáš Hejl
53975eeaa3 Rework of hooks adding 2020-10-10 22:25:51 +02:00
Lukáš Hejl
0b4733f656 The length of the hook is derived from spacing 2020-10-10 21:34:04 +02:00
lukasmatena
89e4a78722
Merge pull request #4747 from wavexx/monospaced_gcode 
Use monospaced fonts in gcode sections
 2020-10-10 14:01:48 +02:00
enricoturri1966
fe971defcd Disabled tech ENABLE_ENVIRONMENT_MAP 2020-10-10 10:11:27 +02:00
Vojtech Bubnik
95af708171 Removed m_ prefix from public member variables. 2020-10-09 13:09:21 +02:00
Vojtech Bubnik
170fe23b46 Fixing Undo / Redo issues after copy / paste due to not updating 
ObjectIDs of support painting / seam painting / layer height profile.
 2020-10-09 12:26:28 +02:00
tamasmeszaros
267907e5ba SLA: Fix for crash with only 1 layer 
fixes #4836
 2020-10-08 10:00:55 +02:00
enricoturri1966
ce0312acbd Fixed gcodeviewer application title on Linux and Mac 2020-10-07 16:02:01 +02:00
Vojtech Bubnik
26b95e3c3c Legacy conversion of "monotonous" to "monotonic" 2020-10-07 09:38:36 +02:00
enricoturri1966
7bee5b5479 Added Preference dialog to standalone gcode viewer 2020-10-06 15:11:08 +02:00
Lukas Matena
b42a12db66 Fixup of 8df0181 (turning off the export of machine limits) 
This should solve #1212 for good
 2020-10-06 13:31:42 +02:00
Lukáš Hejl
6ed25f6e1c Fixed avoiding of other printed objects 
Calling std::move on itself causes that the first polygon is empty, which results in disabling this feature
 2020-10-06 13:19:39 +02:00
YuSanka
764565dbc3 Added info message about successfully save of the preset(s) modifications 
+ more warnings fixes
 2020-10-06 12:32:28 +02:00
Lukas Matena
dbedd3f9b0 Merge branch 'lm_painter_fixes' 2020-10-06 12:09:56 +02:00
Lukas Matena
8bcdbb7a60 Painter gizmos should now work with non-uniformly scaled models 2020-10-06 12:06:39 +02:00
Vojtech Bubnik
e407b79c94 Docker icon on OSX 2020-10-06 12:05:05 +02:00
Vojtech Bubnik
ecade4ac23 Fixed limitation of acceleration values written into G-code 
in case the machine limits are disabled.
 2020-10-06 10:24:06 +02:00
Vojtech Bubnik
7fbdda9080 Renamed monotonous infill to monotonic. 2020-10-05 16:38:28 +02:00
enricoturri1966
c94fb13369 AppConfig modified to generate a separate config file for the standalone gcodeviewer 2020-10-05 15:42:35 +02:00
Lukas Matena
4d3190f988 Changed cmake minimal version to 3.13 (#4720) 2020-10-05 12:10:19 +02:00
enricoturri1966
04a928b241 Follow-up of 8df01818dd -> GCodeProcessor uses new Machine Limits limitations 2020-10-05 09:15:43 +02:00
bubnikv
8df01818dd Limiting the application of Machine Limits 
https://github.com/prusa3d/PrusaSlicer/issues/1212

WIP: The hints do not rescale when switching the "usage" combo box.
The new g-code time estimator needs to be updated to not read
the machine limits if not enabled.
 2020-10-02 17:32:03 +02:00
enricoturri1966
0f44caa99c ENABLE_SLOPE_RENDERING set as default 
Slope rendering active only when using Gizmo FDM supports
 2020-10-02 15:43:39 +02:00
enricoturri1966
11d8a2ad8e Start PrusaSlicer in gcode viewer mode when dragging and dropping a .gcode file on the application icon 2020-10-02 11:40:21 +02:00
Lukáš Hejl
7a9aec2b0b Connect infill with perimeters using hooks 2020-10-02 11:15:55 +02:00
enricoturri1966
1130778d5e Small fix in debug tech ENABLE_GCODE_VIEWER_DATA_CHECKING 2020-10-02 09:14:43 +02:00
Lukáš Hejl
1a8a5984ad Connect lines in the adaptive infill using hooks 2020-10-02 04:18:44 +02:00
YuSanka
2bba0e3131 Physical printers: Implemented import/export to/from the ConfigBundle. 
+ fixed a bug : Case sensitivity of printer's name wasn't check during the adding of a new printer,
as a result in printers list was appeared both of printers (ex. "YuSanka" and "yusanka"), but related file was just one.
 2020-10-01 22:48:57 +02:00
Lukas Matena
1ca8120398 Sphere selection added as an option for painting gizmos 2020-10-01 00:05:01 +02:00
Lukas Matena
c696e6ec19 Experiment with spherical cursor (painting gizmos) 2020-09-30 17:34:11 +02:00
enricoturri1966
980fe77b32 #4806 - Fixed detection of move type for G1 lines containing Z>0 and E>0 2020-09-30 08:34:29 +02:00
bubnikv
ab0890ed34 Merge remote-tracking branch 'remotes/origin/vb_modelobject' 2020-09-29 16:31:18 +02:00
Lukas Matena
48b0a14c4c Fixup of previous commit 2020-09-25 13:00:43 +02:00
Lukas Matena
b178d0af38 Wipe tower - small refactoring and fix 
Collection of data from internal wipe tower gcode generator now uses move semantics.
Part of gcode at the end of priming was erroneously not exported (extruder current reset etc.)
 2020-09-25 12:35:20 +02:00
Lukáš Hejl
0b0709b3d8 Fix crash in adaptive infill when an extrusion line width is zero. 
When an extrusion line width is set to zero, then an extrusion line width is calculated from nozzle diameter.
 2020-09-25 09:54:27 +02:00
Vojtech Bubnik
e0b0a2cdcf Fix of previous commit. 2020-09-24 20:32:52 +02:00
Vojtech Bubnik
7a799be426 DynamicPrintConfig::normalize() renamed to normalize_fdm(), 
optimization of Print::apply()
 2020-09-24 19:03:33 +02:00
Vojtech Bubnik
94aac4cf97 What MSVC could process I always wonder. 2020-09-24 15:45:04 +02:00
Vojtech Bubnik
54976e29bb New class ModelConfig wrapping DynamicPrintConfig and a timestamp 
to help with detecting "not changed" event when taking
Undo/Redo snapshot or synchronizing with the back-end.

Converted layer height profile and supports / seam painted areas
to the same timestamp controlled structure.
 2020-09-24 15:34:13 +02:00
Vojtech Bubnik
0d6eb842b0 Merge branch 'vb_undoredo_timestamp' 2020-09-23 13:00:01 +02:00
Vojtech Bubnik
dde64d361b Tiny polishing and documentation. 2020-09-23 12:59:15 +02:00
Vojtech Bubnik
0dad7adfa1 "There is an object with no extrusions on the first layer." 
should throw SlicingError, not RuntimeError.
 2020-09-23 12:58:58 +02:00
Vojtech Bubnik
056c46d01f Undo/Redo serialization extension: 
If an object indicates a valid timestamp, then the timestamp
is relied upon to not serialize the object data if the timestamp
of the same object on the undo/redo stack matches.
 2020-09-23 12:18:39 +02:00
Lukas Matena
4bf49d960c Merge branch 'lm_seam_painter_backend' 2020-09-22 21:02:07 +02:00
Lukas Matena
a13fc805d7 Removed obsolete wipe tower related code 
Most of the code is already commented out for a long time, it should be safe to remove now.
 2020-09-22 15:20:24 +02:00
Lukas Matena
e7ae26fb8a Fix of #2834 (unretracted wipes on wipe tower) 
Wiping moves performed before moving away from the wipe tower were replaced by
scheduling a regular wipe that is performed after normal gcode generator regains
control. This makes it consistent with wipes on the model and gets rid of the
unretracted wipes.
 2020-09-22 15:20:19 +02:00
Vojtech Bubnik
230dbb7394 Adaptive Cubic infill: 
1) Fixed a wrong offset when extracting infill lines from the octree.
2) Added a variant for testing triangle in a bounding sphere
   when buildind the octree. Currently not used as the box test
   is more tight.
3) "Bridging infill" regions are now triangulated and used to densify
   the octree as well to support the bridging infill correctly.
 2020-09-22 08:53:45 +02:00
Vojtech Bubnik
6cdb19971f Fixed crash in Adaptive Cubic infill if just a single line was extracted. 
New function to chain lines, however not used by the Adaptive Cubic infill.
 2020-09-21 11:10:57 +02:00
Lukas Matena
cf50224248 Fix build on macOS and one logic error 2020-09-18 14:26:06 +02:00
Lukas Matena
6db2d3a0b2 Merge branch 'master' into lm_seam_painter_backend 2020-09-18 13:44:45 +02:00
Lukas Matena
f2951b53c0 Fix build on Linux 2020-09-18 13:37:37 +02:00
Vojtech Bubnik
348c654c26 Adaptive infill: 
Fixing compilation on Linux,
WIP: Better chainining of infill lines.
 2020-09-18 13:35:35 +02:00
Lukas Matena
8123930ee5 Store seam history for more islands 2020-09-18 12:20:02 +02:00
Lukas Matena
8dd345ed4c use center of enforcer only with spAligned 2020-09-18 12:00:48 +02:00
Lukas Matena
fffb79a085 Simple implementation of spRandom 2020-09-18 12:00:40 +02:00
Lukas Matena
5d6bf3261e fixed center-finding algorithm 2020-09-18 12:00:40 +02:00
Lukas Matena
e78221409a Renamed CustomSeam to SeamPlacer, move to a separate file 2020-09-18 12:00:14 +02:00
Lukas Matena
a1fadaf955 Partially working implementation of custom seam backend 2020-09-18 12:00:14 +02:00
Vojtech Bubnik
7e756b20e6 Adaptive infill: Reshuffled the namespaces. 2020-09-18 10:53:50 +02:00
Vojtech Bubnik
37c5fe9923 Refactoring of adaptive cubic / support cubic: 
1) Octree is built directly from the triangle mesh by checking
   overlap of a triangle with an octree cell. This shall produce
   a tighter octree with less dense cells.
2) The same method is used for both the adaptive / support cubic infill,
   where for the support cubic infill the non-overhang triangles are
   ignored.
The AABB tree is no more used.
3) Optimized extraction of continuous infill lines in O(1) instead of O(n^2)
 2020-09-17 18:39:28 +02:00
enricoturri1966
fb4493c9d1 Restore estimated time lines in sidebar info 2020-09-17 11:42:58 +02:00
tamasmeszaros
af785d1486 Fix hollowing crash when splitting broken object has zero parts. 2020-09-16 11:08:58 +02:00
ardenpm
541c31afb0
Merge branch 'master' into pa_reprap_g10_temperature_support 2020-09-15 11:40:38 +10:00
Vojtech Bubnik
1eadb6a1a9 Replaced some of Slic3r::RuntimeError exceptions with Slic3r::SlicingError. 
Only Slic3r::SlicingError are now displayed by a notification, other
exceptions are shown by a pop-up dialog.
 2020-09-14 18:03:22 +02:00
Vojtech Bubnik
067cde85f1 WIP Refactoring of exceptions: 
1) All slicer's exceptions are now derived from Slic3r::Exception.
2) New exceptions are defined for slicing errors.
3) Exceptions are propagated to the Plater to show.
It remains to modify the slicing back-end to throw the new SlicingError
exceptions instead of std::runtime_error and to show the other exceptions
by a message dialog instead of a notification.
 2020-09-14 18:03:22 +02:00
Yuri D'Elia
cd4ad5e78b Introduce ConfigOptionDef::is_code to select code_font() 2020-09-13 02:36:50 +02:00
Yuri D'Elia
a32bb59d8e Do not include (incorrect!) seconds in get_time_dhm 2020-09-12 18:20:22 +02:00
Yuri D'Elia
776a775996 Add missing forward declarations 2020-09-11 16:51:05 +02:00
enricoturri1966
dd6994c3b2 Logging of memory used by the gcode processor and viewer 2020-09-11 15:19:23 +02:00
Lukáš Hejl
137e7a0712 Fix compiler warnings and failing compilation on macOS 2020-09-10 22:57:58 +02:00
Lukáš Hejl
7ef5def077 Fix typo in function build_octree 2020-09-10 22:38:37 +02:00
Lukáš Hejl
e9a325c9ca Fix rotation in support cubic infill 2020-09-10 22:30:49 +02:00
tamasmeszaros
7766c6ebc4 Merge branch 'tm_rotfinder' 2020-09-10 20:06:18 +02:00
tamasmeszaros
20bd7b99f9 Significant performance improvements for elevated and non-elevated case 
Apply bruteforce for elevated models
 2020-09-10 19:35:45 +02:00
YuSanka
f1f9785a8a SplashScreen: 
* Show it on the display same as an Application
 * Code refactoring : All related functions moved to the SplashScreen class
 * Add a possibility o hide/show splash scree in Preferences
 2020-09-10 18:54:29 +02:00
Lukáš Hejl
40a7a44495 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-09-10 17:02:54 +02:00
Lukáš Hejl
f49144a9ef Move support cubic infill to separate class. 
Support infill is enabled in the GUI.
 2020-09-10 16:53:08 +02:00
Lukáš Hejl
8fb9b290b2 A prototype of adaptive support infill 2020-09-10 14:55:48 +02:00
Lukáš Hejl
680b1b9809 Construct octree based on inserted points 2020-09-10 14:52:26 +02:00
Lukáš Hejl
c261624999 A simple version of adaptive cubic support, for testing purposes 2020-09-10 14:52:26 +02:00
Lukáš Hejl
e55d184a7d Fix missing initialization in TriangleMesh constructor 2020-09-10 14:52:26 +02:00
Lukáš Hejl
70cb67430c Move rotation from building octree to infill generating 2020-09-10 14:52:21 +02:00
enricoturri1966
131cc0a41c Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-09-10 14:35:40 +02:00
enricoturri1966
b991b613de Updated titlebar and splash screen + hidden statusbar for gcode viewer 2020-09-10 14:33:55 +02:00
tamasmeszaros
d527122046 Performance optimizations and bugfix 2020-09-10 14:03:30 +02:00
tamasmeszaros
3b7ea5587e Fix build on win 2020-09-10 14:03:30 +02:00
tamasmeszaros
0d4c67b9a3 Mostly working, inefficiencies remain, status indication partly broken 2020-09-10 14:03:30 +02:00
tamasmeszaros
b4b9af4100 cosmethics 
Comments and cosmethics
 2020-09-10 14:03:30 +02:00
tamasmeszaros
c10ff4f503 fixing optimizer and concurrency::reduce 2020-09-10 14:03:30 +02:00
tamasmeszaros
c193d7c930 Brute force optimization code, buggy yet 
wip


wip


wip refactor
 2020-09-10 14:03:30 +02:00
tamasmeszaros
b4e30cc8ad rotation finder experiments 
wip
 2020-09-10 14:03:30 +02:00
tamasmeszaros
7713a55d45 Do a mesh split before openvdb conversion, unify each part's grid 
Do a mesh redistance after the part splitting and openvdb csgUnion
 2020-09-10 13:39:43 +02:00
tamasmeszaros
50836914fc Calibration changes to address new algorithm behavior. 2020-09-10 13:37:58 +02:00
tamasmeszaros
a21ff4141b Fix failing test due to changes in support point genertion 2020-09-10 13:19:17 +02:00
tamasmeszaros
26d5c30366 Improvements to support point generator 
- Separate the 3 bands -- dangling, sloping and full overhanging -- regions and handle them with different support force deficits.

- Use a heuristic for overhanging edges to increase the number of support points generated for them


- Try to make overhangs and slopes deficit depend on stable area.
 2020-09-10 13:19:17 +02:00
enricoturri1966
659c24d3d8 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-09-10 08:50:00 +02:00
enricoturri1966
88457bf412 Tech ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION set as default 2020-09-10 08:49:50 +02:00
Vojtech Bubnik
6a11e7996e Merge branch 'lh_adaptive_infill' 2020-09-09 16:46:43 +02:00
Vojtech Bubnik
7b318e1698 Refactoring of adaptive cubic infill: 
Don't create an octree for the infill if it is not needed.
 2020-09-09 15:55:06 +02:00
enricoturri1966
3527cd48e8 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer 2020-09-09 15:04:40 +02:00
enricoturri1966
2f9dd9d9e8 Completed implementation of 'File->GCode preview...' command 2020-09-09 15:03:51 +02:00
Lukáš Hejl
5e9399247c Check if exist any boundary polyline 2020-09-09 14:40:14 +02:00
Lukáš Hejl
5633526ecf Enable changing adaptive infill density for different objects 2020-09-09 14:40:14 +02:00
Lukáš Hejl
aca212c5bc Octree representation rework 2020-09-09 14:40:14 +02:00
Lukáš Hejl
acedb66cdc Change to using raw_mesh instead of mesh 2020-09-09 14:40:14 +02:00
Lukáš Hejl
000987451a Fix bug in lines merging 2020-09-09 14:40:14 +02:00
Lukáš Hejl
03e103fcc8 Connect infill to perimeters 2020-09-09 14:40:14 +02:00
Lukáš Hejl
398d429ce1 Code cleanup 2020-09-09 14:40:14 +02:00
Lukáš Hejl
d09ac41d2c Octree's first cube depends on model size. 2020-09-09 14:40:14 +02:00
Lukáš Hejl
2debffc496 Fix tests which expect make_fills without arguments 2020-09-09 14:40:14 +02:00
Lukáš Hejl
33121b705a Change in passing octree struct 2020-09-09 14:40:08 +02:00
Lukáš Hejl
9eeb5e4364 Fix wrong data type 2020-09-09 14:37:20 +02:00
Lukáš Hejl
65ba40f044 Fix crash on inconsistent input 2020-09-09 14:37:20 +02:00
Lukáš Hejl
867681ae56 Fix discontinuous extrusion lines for adaptive infill 2020-09-09 14:37:20 +02:00
Lukáš Hejl
14a7fbc9f7 Switch to smart pointers 2020-09-09 14:37:17 +02:00
Lukáš Hejl
c0d21bd2b4 Polylines merging 2020-09-09 14:34:04 +02:00
Lukáš Hejl
c311b84b21 Add function for check existence of triangle in define radius 2020-09-09 14:34:04 +02:00
Lukáš Hejl
9f049b2619 Generating polylines from octree 2020-09-09 14:34:04 +02:00
Lukáš Hejl
34f38c4a79 Building octree based on distance from mesh 2020-09-09 14:34:04 +02:00
Lukáš Hejl
0d26df3cf6 Preparation for new infill 2020-09-09 14:34:04 +02:00
enricoturri1966
d8530e7d9f Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer 2020-09-09 09:12:56 +02:00
enricoturri1966
6b10214bec Fixed export of pause print lines into gcode 2020-09-09 09:06:50 +02:00
enricoturri1966
8cb2636afc Fixed conflicts after merge with master 2020-09-08 15:38:35 +02:00
Vojtech Bubnik
ce06fc6cb7 Added networking support for SL1 Digest authorization. 
Renamed login/password/authorization_type to printhost_user/printhost_password/printhost_authorization_type.
Added initialization of physical printer preset with default values.
 2020-09-08 15:31:10 +02:00
enricoturri1966
67d10a3c0c Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer 2020-09-08 11:55:35 +02:00
enricoturri1966
f58d3116bf Fixed crash when loading gcode files saved with older version of PrusaSlicer 2.3.0.alpha 2020-09-08 11:43:18 +02:00
enricoturri1966
ab556a398b GCode viewer using the proper layout when started as a standalone application 2020-09-08 11:40:06 +02:00
enricoturri1966
8579184d70 Follow-up of 573194e059 -> Fixed crash when opening a gcode file 2020-09-07 11:30:31 +02:00
Lukáš Hejl
97e62be902 Check if exist any boundary polyline 2020-09-07 09:14:06 +02:00
enricoturri1966
e10d1eba54 GCodeProcessor -> Use decorations to detect toolpaths height for gcode files generated by PrusaSlicer 2020-09-07 08:35:34 +02:00
Lukáš Hejl
6c01d537e4 Enable changing adaptive infill density for different objects 2020-09-03 23:15:46 +02:00
Lukáš Hejl
ce18b824ad Octree representation rework 2020-09-03 19:21:55 +02:00
Lukáš Hejl
c2af265df8 Change to using raw_mesh instead of mesh 2020-09-03 16:08:40 +02:00
Lukáš Hejl
184cb7afd9 Fix bug in lines merging 2020-09-03 14:28:25 +02:00
Lukáš Hejl
353c65fa4c Connect infill to perimeters 2020-09-03 13:05:28 +02:00
Lukáš Hejl
a3a1c20172 Code cleanup 2020-09-03 11:56:41 +02:00
enricoturri1966
573194e059 GCodeProcessor -> Added cancel callback 2020-09-03 08:32:06 +02:00
Lukáš Hejl
fd3a31651c Octree's first cube depends on model size. 2020-09-03 08:04:05 +02:00
Lukáš Hejl
71237cf11f Fix tests which expect make_fills without arguments 2020-09-03 07:52:53 +02:00
Lukáš Hejl
5997f2759c Change in passing octree struct 2020-09-02 22:53:10 +02:00
YuSanka
4d053cc4ee Merge remote-tracking branch 'origin/master' into ys_unsaved_changes 2020-09-02 09:15:11 +02:00
Lukas Matena
7844ca12fa First naive prototype of seam painter 2020-09-02 00:36:30 +02:00
Lukas Matena
60cf002e94 Fixed merge conflicts (whitespace only) 2020-09-02 00:36:30 +02:00
Lukas Matena
6646198a9b Merge branch lm_seam_painter_frontend 2020-09-01 23:03:16 +02:00
Lukas Matena
9c59b4f930 Custom seam: Model integration, backend invalidation, 3MF loading/saving 2020-09-01 22:35:01 +02:00
Lukas Matena
255469347f Fixed several indentation-related warnings 2020-09-01 18:18:56 +02:00
tamasmeszaros
761e71eb63 Fix build on msvc 2020-09-01 18:18:56 +02:00
Lukas Matena
1eef1d32a0 Added two missing includes to fix build on gcc 2020-09-01 18:12:51 +02:00
bubnikv
08580a9b18 WIP: prusa-gcodeviewer command line wrapper to start the PrusaSlicer 
in standalone G-code viewer mode.
Linux and OSX stuff will follow.
 2020-09-01 16:56:12 +02:00
Vojtech Bubnik
683af51685 Replaced boost::filesystem::canonical() with boost::filesystem::absolute(), 
as canonical() is broken on Windows (reparse points aka symbolic links
are not processed correctly).

Fixes
https://github.com/prusa3d/PrusaSlicer/issues/732
https://github.com/prusa3d/PrusaSlicer/issues/3956
https://github.com/prusa3d/PrusaSlicer/issues/4557
 2020-09-01 14:15:37 +02:00
enricoturri1966
e32930aa6c Code cleanup 2020-09-01 09:28:02 +02:00
enricoturri1966
bf7b952eff GCodeViewer -> Smoothed solid toolpaths corners 2020-09-01 08:29:06 +02:00
Lukáš Hejl
423d1f2f40 Fix wrong data type 2020-08-31 08:49:17 +02:00
Lukáš Hejl
8e6760e033 Fix crash on inconsistent input 2020-08-30 20:38:07 +02:00
enricoturri1966
b563010bf1 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer 2020-08-28 12:30:45 +02:00
enricoturri1966
93921dc7c8 ENABLE_GCODE_VIEWER -> Experimental taskbar icon 2020-08-28 08:54:58 +02:00
tamasmeszaros
79567a1958 Add some comments for png read interface 2020-08-27 23:14:42 +02:00
tamasmeszaros
ad0df8fd09 Be compatible with earlier libpng versions. 2020-08-27 23:14:42 +02:00
tamasmeszaros
b09552e56f Don't use fmemopen, its not standard. 2020-08-27 23:14:42 +02:00
tamasmeszaros
8541ce4060 SLA archive import will now recover the model's original position. 2020-08-27 23:14:42 +02:00
tamasmeszaros
769ee15475 Move SLA import to libslic3r with png reading using libpng 
Also fix flipped object issue
 2020-08-27 23:14:42 +02:00
tamasmeszaros
2bcd36d155 PNG image read with libpng 2020-08-27 23:14:42 +02:00
tamasmeszaros
19e1d877aa Don't use sla::EncodedRaster in SLAImport, revive opencsg sandbox 2020-08-27 23:14:42 +02:00
enricoturri1966
e22e85e8e2 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer 2020-08-27 13:11:49 +02:00
Lukáš Hejl
b28f9b8935 Fix discontinuous extrusion lines for adaptive infill 2020-08-27 13:04:53 +02:00
bubnikv
17170b81b5 Clean-up of Shiny profiler integration, so that the intrusiver profiling 
can be controlled per module.
 2020-08-27 12:14:49 +02:00
enricoturri1966
689c8691ee Another code cleanup 2020-08-27 10:15:07 +02:00
enricoturri1966
af30a3ab7e Code cleanup 2020-08-27 09:13:30 +02:00
enricoturri1966
88b6835258 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer 2020-08-27 08:00:45 +02:00
Lukáš Hejl
c5a73a7cd6 Switch to smart pointers 2020-08-27 07:28:43 +02:00
Lukáš Hejl
cb328c99aa Polylines merging 2020-08-27 01:59:35 +02:00
Lukáš Hejl
fb24d8167a Add function for check existence of triangle in define radius 2020-08-26 23:28:52 +02:00
Lukáš Hejl
eaaff4e707 Generating polylines from octree 2020-08-26 22:18:51 +02:00
bubnikv
41f474a884 Fixed performance issues when adding / removing Presets into PresetCollection. 
This improves application startup time by 25-33%.
 2020-08-26 21:51:50 +02:00
Lukáš Hejl
3ac16d9c9c Building octree based on distance from mesh 2020-08-26 18:15:59 +02:00
Lukáš Hejl
42a7f2b1d8 Preparation for new infill 2020-08-26 16:51:34 +02:00
enricoturri1966
ba9c3a74ed GCodeViewer -> 1st iteration of rendering of extrude toolpaths as solid 2020-08-26 15:29:33 +02:00
enricoturri1966
e4f767b2ed Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer 2020-08-24 15:11:15 +02:00
Lukas Matena
c51a45ee0f Drainholes are saved elevated for 3MF compatibility 
This is a follow-up of previous commit
 2020-08-24 08:11:12 +02:00
Lukas Matena
a95509ce36 Changed internal coordinates of drain holes 
Drain holes reference position was saved slightly above the mesh to avoid problem when the hole is placed on flat or nearly flat surface
The depth of the hole was internally bigger than what the user has set to compensato for it
However, this leads to problem with scaling and makes reprojection of the holes on the mesh complicated

This commit changes the reference point to the point on the mesh and the extra elevation is handled when rendering and drilling the hole.
The change is reflected in 3MF drain holes versioning so that old 3MFs are loaded correctly.
Reprojection on the mesh after reload from disk/fix through netfabb has been enabled.
 2020-08-24 08:11:12 +02:00
enricoturri1966
34759f9a70 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer 2020-08-21 11:10:27 +02:00
enricoturri1966
7a093b08fd GCodeViewer -> Show printbed model and texture for system printers detected when loading gcode files produced by PrusaSlicer 2020-08-21 10:59:07 +02:00
Paul Arden
f6d25d0634 Rework G10 temperature support to be enabled only for a new Firmware type RepRapFirmware leaving the RepRap/Sprinter behaviour alone. Rename the enum for gcfRepRap to gcfRepRapSprinter and add new gcfRepRapFirmware enum value. Also adds code to only use the G10 searching in custom G-code if the flavour is RepRapFirmware. 2020-08-21 14:08:32 +10:00
Lukas Matena
739cd2a4a2 Fixed several indentation-related warnings 2020-08-19 17:15:01 +02:00
YuSanka
15545bbd90 Merge remote-tracking branch 'origin/master' into ys_unsaved_changes 2020-08-19 15:44:24 +02:00
enricoturri1966
af200e47c1 Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer 2020-08-19 08:18:23 +02:00
tamasmeszaros
5052149b81 Fix build on msvc 2020-08-18 13:45:18 +02:00
enricoturri1966
bd4e4535f9 GCodeProcessor -> Calculate per layer time estimate 2020-08-18 12:37:07 +02:00
Lukas Matena
6db1e5ab8f Slight code cleanup 2020-08-18 12:00:26 +02:00
Lukas Matena
97bc092cce Renamed FacetSupportType to EnforcerBlockerType 
So it's not misleading if we use it for seam painting
 2020-08-18 12:00:26 +02:00
tamasmeszaros
4ef52af906 Add dedicated tests for support point generation 2020-08-18 11:41:14 +02:00
enricoturri1966
ca27d7296f Fixed build when ENABLE_GCODE_VIEWER is disabled 2020-08-18 08:27:07 +02:00
enricoturri1966
c81d87b470 Code cleanup 2020-08-17 15:59:36 +02:00
enricoturri1966
73603e4937 GCodeProcessor -> Do not export width tags to gcode 2020-08-17 14:37:26 +02:00
enricoturri1966
b156153405 GCodeViewer -> Use rounded values for toolpaths height, width and volumetric rate to reduce the number of generated paths 2020-08-17 13:07:13 +02:00