3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,257 Commits 1 Branch 1 Tag 249 MiB
b551852392
Commit Graph

1945 Commits

Author SHA1 Message Date
Alessandro Ranellucci
0d6ff22e19 Merge branch 'wipe' 2013-03-31 11:36:04 +02:00
Alessandro Ranellucci
0e6d80d33c Bump version number 2013-03-31 11:24:33 +02:00
Alessandro Ranellucci
01e86c2615 Releasing 0.9.9 2013-03-30 15:59:17 +01:00
Alessandro Ranellucci
04d2231901 Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049 2013-03-30 11:22:12 +01:00
Alessandro Ranellucci
7f23e72a10 Display preview for small files too. #929 2013-03-30 00:52:45 +01:00
Alessandro Ranellucci
33a4ec660d better handling of too-small and too-short models #929. 
These changes handle small models better in the plater preview.
Extremely small thumbnails are preserved instead of culled,
allowing the model to be scaled up. The scale range is extended to
100000% to allow mm-scale objects expressed in meters to be opened
and scaled to mm.
Original coding by mesheldrake
 2013-03-30 00:47:13 +01:00
Alessandro Ranellucci
ac2356f66a Don't crash at the end of empty prints. #1042 2013-03-30 00:36:14 +01:00
Alessandro Ranellucci
7b7c9f6330 Launch even if config is corrupted. #1067 2013-03-30 00:30:21 +01:00
Alessandro Ranellucci
f5e48a306d Bugfix: support material and brim didn't work correctly. Includes unit test. #1074 2013-03-30 00:21:09 +01:00
Alessandro Ranellucci
d4119b0eb1 Better bridge direction detection. #1068 2013-03-29 23:49:58 +01:00
Alessandro Ranellucci
5beb2187d3 Bugfix: infill direction wasn't correctly alternated when infilling every 2 layers. #1068 2013-03-29 19:24:08 +01:00
Alessandro Ranellucci
1b79b1cb20 Refactoring: use the clone() method for inflating Surface objects 2013-03-29 19:18:06 +01:00
Alessandro Ranellucci
e563c62094 Replace SetValue with ChangeValue to avoid wxWidgets to fire useless events 2013-03-29 18:56:34 +01:00
Alessandro Ranellucci
d2b451d9a1 Merge branch 'master' into wipe 2013-03-26 16:28:01 +01:00
Alessandro Ranellucci
aae9625a13 Bugfix: solid-infill-below-area wasn't ignored when fill_density = 0, causing solid layers here and there. #1049 2013-03-26 15:47:40 +01:00
Alessandro Ranellucci
2f046799f2 Removed offset() method from Slic3r::Polygon because it only works with ccw polygons 2013-03-26 14:03:24 +01:00
Alessandro Ranellucci
4c41f6c462 Safer safety_offset() for ExPolygons 2013-03-26 13:57:37 +01:00
Alessandro Ranellucci
769ec0cb03 Better clipping of honeycomb paths 2013-03-26 13:04:57 +01:00
Alessandro Ranellucci
843a700e96 Fixes for wipe 2013-03-25 23:06:18 +01:00
Alessandro Ranellucci
4cb36fcbe2 Remove cooling checkbox from simple mode 2013-03-24 21:28:16 +01:00
Alessandro Ranellucci
6bc5de0b5d Allow custom ranges with layer_height = 0 2013-03-24 15:26:55 +01:00
Alessandro Ranellucci
b7cd362820 Remove scale from G-code comments 2013-03-19 19:16:13 +01:00
Alessandro Ranellucci
7ec6c6ffba Lower 0.5*w to 0.4*w to fill finer gaps. #1057 2013-03-19 16:08:19 +01:00
Alessandro Ranellucci
34b192fde3 Merge pull request #1059 from cakeller98/Universal_File_Visibility 
Added "known" as a valid model file type
 2013-03-19 08:05:19 -07:00
Alessandro Ranellucci
9c122bda5e Fix memory leak in avoid_crossing_perimeters. #1044 2013-03-19 16:02:03 +01:00
Alessandro Ranellucci
813aa5b307 Allow drag and drop for OBJ files 2013-03-19 12:25:10 +01:00
Alessandro Ranellucci
fd2a5e894a Respect perimeter/infill order when multiple extruders are configured but only one is used 2013-03-19 11:58:03 +01:00
Christopher Keller
8bbaafd830 Added "known" as a valid model file type 
=> 'Known files (*.stl, *.obj, *.amf)|*.stl;*.STL;*.obj;*.OBJ;*.amf;*.AMF;*.xml;*.XML',

When dialog pops up, it can see ALL known file types instead of only stl.
 2013-03-18 20:52:55 -07:00
Alessandro Ranellucci
ec5f0635f7 Add wipe in GUI 2013-03-18 21:20:32 +01:00
Alessandro Ranellucci
96f1b7ab57 Merge branch 'master' into wipe 2013-03-18 21:18:24 +01:00
Alessandro Ranellucci
1abd8c9a9e Remove the 'simplify' handle in ExtrusionPath after the recent refactoring. #1054 2013-03-18 18:03:14 +01:00
Alessandro Ranellucci
f0ac1c704e Fix test framework detecting dE=0 as retraction 2013-03-18 18:01:01 +01:00
Alessandro Ranellucci
0b81911cff Bugfix: artifacts near walls. #1049 2013-03-18 17:55:16 +01:00
Alessandro Ranellucci
8ce31c2a2b Don't exclude any infill under internal bridges; revert infill pattern to rectilinear for internal bridges. #240 2013-03-18 13:32:19 +01:00
Alessandro Ranellucci
7f917671ab Bugfix: horizontal projection for high-res models might show corrupted result 2013-03-17 15:39:51 +01:00
Alessandro Ranellucci
8d2c651ef2 $surface->thickness was erroneously defaulting to 1 mm 2013-03-17 14:58:10 +01:00
Alessandro Ranellucci
1064c9bb2a Merge branch 'master' into grow-narrow 
Conflicts:
	lib/Slic3r/Fill.pm
	lib/Slic3r/Print/Object.pm
 2013-03-17 02:30:20 +01:00
Alessandro Ranellucci
7de8b20bc4 New wipe feature 2013-03-17 02:22:50 +01:00
Alessandro Ranellucci
83065b0789 Bugfix: wrong flow and bad pattern rotation when infill-every-layers was set to an arbitrary high value 2013-03-17 01:10:40 +01:00
Alessandro Ranellucci
04c0caad0b Fix honeycomb infill overlap with perimeters 2013-03-17 00:57:58 +01:00
Alessandro Ranellucci
537fca47c5 Use solid infill speed for internal bridges; apply slowdown if any; don't use bridge fan settings. #240 2013-03-17 00:42:53 +01:00
Alessandro Ranellucci
700fee14aa Set honeycomb as default fill pattern, as it works better at low layer heights and makes stronger parts 2013-03-17 00:24:53 +01:00
Alessandro Ranellucci
c999d0c44f Set default value for first_layer_height to 0.35mm so that first_layer_extrusion_width = 200% works fine even when user sets layer_height to 0.1. A first layer height of 0.35mm works fine for both 0.35 and 0.5 nozzles so it should be fine for most users 2013-03-17 00:22:53 +01:00
Alessandro Ranellucci
78a4ae4835 Use full flow for sparse infill by default 2013-03-17 00:21:17 +01:00
Alessandro Ranellucci
35bd5a3423 New --solid-infill-extrusion-width option 2013-03-17 00:02:31 +01:00
Alessandro Ranellucci
c13d9e9fb3 Don't collapse overhangs too early 2013-03-16 21:51:38 +01:00
Alessandro Ranellucci
0f5064dd32 Untested fix for incomplete honeycomb support material. #1032 2013-03-16 21:10:12 +01:00
Alessandro Ranellucci
25554a345f Reorder object copies using a nearest neighbor search 2013-03-16 20:56:14 +01:00
Alessandro Ranellucci
cf5adca928 New --resolution option to simplify input models 2013-03-16 19:58:34 +01:00
Alessandro Ranellucci
10b6bc9d15 Removed keep_meshes 2013-03-16 19:39:00 +01:00
Alessandro Ranellucci
f4b8185698 Fixed typo preventing support material to work with new simplify() syntax 2013-03-16 19:11:49 +01:00
Alessandro Ranellucci
db2e76a0df New option to change perimeter order. #534 2013-03-16 18:56:49 +01:00
Alessandro Ranellucci
33b40eda18 Always fix self-intersecting polygons that Douglas-Peucker might return 2013-03-16 18:42:56 +01:00
Alessandro Ranellucci
0f8ca6191a Merge branch 'master' into grow-narrow 2013-03-16 16:22:03 +01:00
Alessandro Ranellucci
dc0f706789 Bugfix: simplification of support areas could lead to complex polygons with bad orientation, thus causing wrong pattern clipping. #1032 2013-03-14 14:27:08 +01:00
Alessandro Ranellucci
f528088d31 Merge branch 'master' into grow-narrow 2013-03-13 16:39:57 +01:00
Alessandro Ranellucci
9713b9f524 Fix narrow fills growing 2013-03-13 14:55:58 +01:00
Alessandro Ranellucci
0feef890b1 Use Class::XSAccessor 2013-03-13 01:29:45 +01:00
Alessandro Ranellucci
cab51d4581 One more slight optimization 2013-03-13 01:14:47 +01:00
Alessandro Ranellucci
a412291690 Little optimization 2013-03-13 01:07:06 +01:00
Alessandro Ranellucci
d9b82c79da Grow narrow infill regions into void - to be tested more 2013-03-13 01:03:54 +01:00
Alessandro Ranellucci
6058384978 Fixed regression causing crash when support material threshold angle was defined. #1048 2013-03-12 19:39:43 +01:00
Alessandro Ranellucci
5c1336d2de Clarify that min Z, max Z and layer height are supposed to be expressed in mm 2013-03-12 10:28:51 +01:00
Alessandro Ranellucci
a5e6340004 Workaround for HideRowLabels() missing in wxWidgets 2.8. #770 2013-03-11 20:00:12 +01:00
Alessandro Ranellucci
999af84c54 Don't make internal bridges when fill_density == 1. #1045 2013-03-11 18:41:12 +01:00
Alessandro Ranellucci
0df8398a39 Use concentric infill for internal bridges. #240 2013-03-11 18:38:32 +01:00
Alessandro Ranellucci
0eecf33198 Bugfix: narrow solid shells were collapsed when spacing was added before generating infill, so we grow them 2013-03-11 18:37:01 +01:00
Alessandro Ranellucci
b73c301c55 Bugfix: double lift at toolchange. #953 2013-03-11 17:06:05 +01:00
Alessandro Ranellucci
0326962d11 Merge branch 'new-extra-perimeters' 2013-03-11 14:24:02 +01:00
Alessandro Ranellucci
e809a5bdcc Added support for expolygons in Slic3r::SVG 2013-03-11 14:23:45 +01:00
Alessandro Ranellucci
b7945ac790 Finished new extra perimeters implementation 2013-03-11 14:23:16 +01:00
Alessandro Ranellucci
428cd7867d Missing bit 2013-03-11 12:47:27 +01:00
Alessandro Ranellucci
74e21d7a04 New implementation of extra perimeters - to test 2013-03-10 19:08:36 +01:00
Alessandro Ranellucci
964accb588 Typo 2013-03-10 19:07:41 +01:00
Alessandro Ranellucci
2942485a94 New option to make infill before perimeters. #1039 2013-03-10 18:15:44 +01:00
Alessandro Ranellucci
ab3d1ac820 Give priority to infill extruder if it was used last. #940 2013-03-10 17:40:19 +01:00
Alessandro Ranellucci
107f48d894 Reduce toolchanges by giving priority to last extruder on layer change. #940 2013-03-10 17:28:03 +01:00
Alessandro Ranellucci
dac168eff0 Do each island completely if avoid_crossing_perimeters is enabled. #278 2013-03-10 16:09:03 +01:00
Alessandro Ranellucci
f10a4787b2 Fix layer ordering when printing objects with different layer heights 2013-03-10 15:36:52 +01:00
Alessandro Ranellucci
f670acb4b1 Slice a single object with multiple layer heights. :-) 2013-03-10 14:58:49 +01:00
Alessandro Ranellucci
d1acc511b3 Refactor ObjectDialog into a tab panel 2013-03-10 12:46:54 +01:00
Alessandro Ranellucci
6a0ba97f0e Move ObjectDialog to a separate file 2013-03-10 12:33:10 +01:00
Alessandro Ranellucci
d2152a53a0 Missing tooltip for extra perimeters 2013-03-10 12:30:43 +01:00
Alessandro Ranellucci
17cbca5e06 Factor out layer height in support material generation 2013-03-10 12:22:40 +01:00
Alessandro Ranellucci
2ab5fa9c72 Factor out layer height from combine_infill() 2013-03-10 12:08:18 +01:00
Alessandro Ranellucci
2275de9f0d Factored out the layer height logic 2013-03-10 11:37:16 +01:00
Alessandro Ranellucci
e9c7460c11 New --bridge-acceleration option 2013-03-09 20:31:09 +01:00
Alessandro Ranellucci
2acda9973e Don't apply acceleration settings to travel moves 2013-03-09 20:28:03 +01:00
Alessandro Ranellucci
b7b89ff7f2 Bugfix: *-acceleration options didn't work in CLI 2013-03-09 20:21:05 +01:00
Alessandro Ranellucci
460e169c67 New option to disable retraction on layer change 2013-03-09 20:05:43 +01:00
Alessandro Ranellucci
e71bf48463 Add a command to lift nozzle in default start G-code 2013-03-09 19:51:09 +01:00
Alessandro Ranellucci
d50e0af548 Make sure the inwards move after last perimeter loop doesn't exceed object boundary 2013-03-09 17:15:45 +01:00
Alessandro Ranellucci
caa79583ff Tiny optimization 2013-03-09 17:08:17 +01:00
Alessandro Ranellucci
fa41e15c68 Fixed regression causing thin walls to be processed twice, thus producing overlapping straight paths and zigzag. #1035 2013-03-09 17:07:11 +01:00
Alessandro Ranellucci
a2702082b2 Merge pull request #962 from scottp/issue_885b 
Add defaults into Tooltips from #885
 2013-03-09 07:48:20 -08:00
Alessandro Ranellucci
9247b3e9f4 New --no-plater and --gui-mode options. #604 2013-03-09 16:43:09 +01:00
Alessandro Ranellucci
af50272b3b Refactor simple mode definitions to dedicated SimpleTab classes 2013-03-09 16:27:18 +01:00
Alessandro Ranellucci
5477d66902 Advertise the expert mode in simple mode 2013-03-09 14:55:07 +01:00
Alessandro Ranellucci
46f35e39f6 Some more tweaks 2013-03-08 23:34:57 +01:00
Alessandro Ranellucci
0748e088a0 Reorder options in simple mode 2013-03-08 23:07:14 +01:00
Alessandro Ranellucci
84f4f098ca Fix cooling and load in simple-mode. #1001 2013-03-08 22:58:28 +01:00
Alessandro Ranellucci
b901e1f6c8 Merge branch 'master' into simple-mode 2013-03-08 22:28:13 +01:00
Alessandro Ranellucci
4fc435f0fd Bugfix: retract speed was applied to travel 2013-03-08 17:52:33 +01:00
Alessandro Ranellucci
f494335f77 Bugfix: not all the calls to travel_to() were updated 2013-03-08 13:50:50 +01:00
Alessandro Ranellucci
2f192bddca Make tests happy 2013-03-07 16:24:25 +01:00
Alessandro Ranellucci
97e864699e New top-infill-extrusion-width option 2013-03-07 16:00:58 +01:00
Alessandro Ranellucci
36d24ccb0b Infill refactoring and cleanup complete 2013-03-07 15:47:32 +01:00
Alessandro Ranellucci
d928f005e6 Some incomplete work for cleaner infill logic 2013-03-05 20:03:46 +01:00
Alessandro Ranellucci
a9df56670f Bugfix: internal-bridge regions were not touching perimeters 2013-03-05 19:33:06 +01:00
Alessandro Ranellucci
37810f777f Make only_retract_when_crossing_perimeters work with avoid_crossing_perimeters 2013-03-05 17:30:27 +01:00
Alessandro Ranellucci
72613ae2b4 Enable only_retract_when_crossing_perimeters by default 2013-03-05 15:01:45 +01:00
Alessandro Ranellucci
70092a9cf5 Apply only_retract_when_crossing_perimeters to all infills 2013-03-04 23:37:58 +01:00
Mike Sheldrake
28467b68e0 typo - fix wrong bridge direction #621 
fixes two out of three reported in #621 (but not the first one)
likely the same issue in #706 and #1003
 2013-02-27 15:16:07 -08:00
Alessandro Ranellucci
a6243124a9 Merge pull request #984 from giseburt/origin_master 
Fix for Replicator 1 not finishing builds.
 2013-02-27 02:37:45 -08:00
Alessandro Ranellucci
fafad0fd81 Code for memory usage statistics 2013-02-27 11:26:52 +01:00
Alessandro Ranellucci
bb83f070ae Load threads::shared before Wx. #1018 2013-02-27 11:08:08 +01:00
Alessandro Ranellucci
919d1131f8 Use nearest-neighbor search for internal perimeters too. #1025 2013-02-27 11:04:14 +01:00
Alessandro Ranellucci
c3d90a1ff8 Rename $layer to $layerm in Slic3r::Fill too for consistency 2013-02-27 10:44:42 +01:00
Alessandro Ranellucci
a9090688f9 Refactor bridge flow to Slic3r::Flow::Bridge class 2013-02-27 10:43:50 +01:00
Alessandro Ranellucci
d00c2882c4 Remove debug line slipped into last commit 2013-02-27 10:30:05 +01:00
Alessandro Ranellucci
bf9fe1b505 Bugfix: internal bridge surfaces were incorrectly merged with other internal solid surfaces, causing suboptimal results 2013-02-27 01:30:32 +01:00
Alessandro Ranellucci
8ce7b13db5 Fixed regression in is_printable() - needs unit test 2013-02-26 20:54:40 +01:00
Alessandro Ranellucci
37be4f7319 Some cleanup for detect_surfaces_type() 2013-02-26 20:52:13 +01:00
Alessandro Ranellucci
f4e8cdbf36 Better logic for extra perimeters 2013-02-26 20:00:05 +01:00
Alessandro Ranellucci
038737abe6 Bugfix: minimum flow for low layer heights was still too low 2013-02-26 14:15:05 +01:00
Alessandro Ranellucci
7412d4a687 Bugfix: manifoldness error triggered with multi-volume AMF files. #1019 2013-02-24 18:17:08 +01:00
Alessandro Ranellucci
bd76e7677c Adjust extra perimeters 2013-02-24 17:04:19 +01:00
Alessandro Ranellucci
c3dde74776 Fix brim and extra perimeters after recent changes to ->slices 2013-02-24 16:40:14 +01:00
Alessandro Ranellucci
de0c2febd9 Remove useless lines 2013-02-23 23:50:46 +01:00
Alessandro Ranellucci
08a72c0824 Use bridge math for the first solid infill layer above sparse infill. #240 2013-02-23 21:39:13 +01:00
Alessandro Ranellucci
3b1e921171 Slight changes to the defaults 2013-02-23 19:14:41 +01:00
Alessandro Ranellucci
0634437364 Keep the full geometries in $layer->slices, including thin walls 2013-02-23 18:21:29 +01:00
Alessandro Ranellucci
504962712b Bugfix: when using low layer heights and support material, the contact regions were generated with a negative height. #1013 2013-02-23 17:40:38 +01:00
Alessandro Ranellucci
3eedd4bbed Fixed regression in support material after recent flow refactoring. #1012 2013-02-23 16:08:29 +01:00
Alessandro Ranellucci
72df796185 Bugfix: failure in launching on Windows with non-ASCII characters in username. #1011 2013-02-22 18:40:00 +01:00
Alessandro Ranellucci
28638019ae Bugfix: perimeter/infill overlap was calculated regardless of the infill extrusion width. #994 2013-02-22 18:23:23 +01:00
Alessandro Ranellucci
bec2371604 Fix regression introduced in 91bcfc8a74 2013-02-22 16:56:43 +01:00
Alessandro Ranellucci
5eade0f9e1 Don't validate the number of layers for infill combination, just limit it automatically. #993 2013-02-22 16:24:24 +01:00
Alessandro Ranellucci
91bcfc8a74 Remove $Slic3r::flow and $Slic3r::first_layer_flow 2013-02-22 16:08:11 +01:00
Alessandro Ranellucci
b9c84490b8 Get rid of most calls to $Slic3r::flow 2013-02-19 12:37:26 +01:00
Alessandro Ranellucci
6dc62d3cf2 Disable extra perimeters if fill density is zero as they wouldn't be supported by anything and would just float inside the object. infill_only_where_needed should be the method of choice for hollow objects 2013-02-19 12:37:26 +01:00
Mike Sheldrake
c2f04f2861 avoid overlap of single layer and multilayer fill 
A single-layer rectilinear or honeycomb fill under a low slope
wall/ceiling or extra perimeter will stick out from under the
overhang, because those fills get extended beyond their fill_surface
boundaries to purposely overlap perimeters. This causes interference
with multil-layer fills. This commit clips the single layer fill
boundaries a bit more where they interface with multi-layer fill
boundaries, to avoid overlap.
 2013-02-18 07:26:19 -08:00
Mike Sheldrake
9a86edc70c account for extrusion width when clearing layers for combined infill 
Otherwise you get extraneous fill up against sloped walls in regions
of layers that should not have fill, like in #834.
 2013-02-16 07:53:47 -08:00
Alessandro Ranellucci
c9b506fa02 New simpler and more robust implementation of infill every 'n' layers 2013-02-10 12:40:43 +01:00
Alessandro Ranellucci
cac79c0575 New option to only infill where strictly needed for supporting ceilings 2013-02-09 23:36:32 +01:00
Alessandro Ranellucci
cf8cfc1380 Bugfix: angle threshold was considered even when enforcing support 2013-02-09 21:49:00 +01:00
Robert Giseburt
6c12bd32ad Fix for Replicator 1 not finishing builds. 
If the progress reaches 100% before last layer, the firmware erroneously stops reading the file.
 2013-02-06 22:32:37 -06:00
Alessandro Ranellucci
26a3cd5542 Refactor chained_path(), add chained_path_items() and chained_path_points() 2013-02-06 12:03:53 +01:00
Alessandro Ranellucci
e593a30fc7 Skip support material for one-layer objects 2013-02-06 10:40:08 +01:00
Alessandro Ranellucci
4f91bed904 Optimize cycling in get_layer_range() 2013-02-05 21:59:18 +01:00
Alessandro Ranellucci
73a661e6c1 shortest_path() in MotionPlanner was actually correctly named shortest_path() 2013-02-05 19:41:56 +01:00
Alessandro Ranellucci
090e3b1fe3 Rename shortest_path to chained_path, which reflects its algorithm more correctly 2013-02-05 17:27:45 +01:00
Alessandro Ranellucci
11637d527a Bugfix: avoid-crossing-perimeters was failing on layers only containing single walls. #978 2013-02-04 19:33:30 +01:00
Alessandro Ranellucci
8efe46e58d New option to enforce support material on a given number of layers to improve adhesion of objects with poor footprint 2013-02-04 15:48:57 +01:00
Alessandro Ranellucci
c8100ed099 Disable randomize starting points by default 2013-02-04 15:05:56 +01:00
Alessandro Ranellucci
7d08796b0a Remove sporadic duplicate useless lines. #772 2013-02-04 14:27:23 +01:00
Alessandro Ranellucci
9222526e03 Customizable number of interface layers for support material and raft 2013-02-03 17:23:50 +01:00
Alessandro Ranellucci
acada05068 Merge branch 'raft' 2013-02-02 16:17:05 +01:00
Alessandro Ranellucci
c7b4d99d7e Generate raft automatically even when support material is disabled 2013-02-02 16:16:43 +01:00
Alessandro Ranellucci
02c0f3658f Use 50% density for support base flange 2013-02-02 15:37:09 +01:00
Alessandro Ranellucci
d3727a1699 Add ability to have cross-hatched rectilinear support material. #509 2013-02-02 00:14:45 +01:00
Alessandro Ranellucci
547dfb857d Workaround for Boost clipping not being idempotent and causing lack of support material 2013-02-01 23:45:46 +01:00
Alessandro Ranellucci
eae1e7adc2 Make a solid base below support material on first layer 2013-02-01 22:13:12 +01:00
Alessandro Ranellucci
1de0169910 Multithreaded perimeter generation. #154 2013-01-31 15:44:55 +01:00
Scott Penrose
9d086f027a Add defaults into Tooltips from #885 2013-01-30 09:53:22 +11:00
Alessandro Ranellucci
177f1a9bf0 New raft_layers option. #123 2013-01-28 14:12:01 +01:00
Alessandro Ranellucci
a016a06fa6 Merge branch 'avoid-crossing-perimeters' 
Conflicts:
	lib/Slic3r/GCode.pm
 2013-01-28 10:43:58 +01:00
Alessandro Ranellucci
e8cb1f4528 Slight addition to avoid_crossing_perimeters tooltip 2013-01-28 10:42:24 +01:00
Alessandro Ranellucci
721b61e798 Require Boost::Geometry::Utils 0.06 2013-01-28 00:34:09 +01:00
Alessandro Ranellucci
2963e54d21 Use the faster polygon_multi_linestring_intersection() 2013-01-28 00:32:19 +01:00
Alessandro Ranellucci
ae201c8f41 Optimization: avoid calculating square roots if not needed 2013-01-28 00:18:55 +01:00
Alessandro Ranellucci
6cb891f2db Use Boost::Geometry::Utils for Douglas-Peucker 2013-01-28 00:09:19 +01:00
Alessandro Ranellucci
4c8c725eec Add a wkt() method to ExPolygon 2013-01-28 00:02:34 +01:00
Alessandro Ranellucci
ddaeaa7591 Fix last_pos shifting and add unit test 2013-01-27 13:08:13 +01:00
Alessandro Ranellucci
50526dea5a Fix last_pos shifting and add unit test 2013-01-27 13:06:45 +01:00
Alessandro Ranellucci
ad48fdc7f9 Fix external motionplanner too 2013-01-27 12:48:16 +01:00
Alessandro Ranellucci
f1230312e3 Fixes for merge issues 2013-01-26 23:55:47 +01:00
Alessandro Ranellucci
61b164b539 Merge branch 'master' into avoid-crossing-perimeters 
Conflicts:
	lib/Slic3r/GCode.pm
	lib/Slic3r/Print.pm
 2013-01-26 21:45:17 +01:00
Alessandro Ranellucci
4c62c1b570 Support .gco extension too. #957 2013-01-26 21:40:20 +01:00
Mike Sheldrake
bc61656057 harmless misplaced semicolon 2013-01-26 09:31:28 -08:00
Mike Sheldrake
599d76b70b avoid DBus related crash on Ubuntu #954 
An undocumented feature of Net::DBus->session() is that it returns
the same connection object it creates the first time it's called for
all subsequent calls. Somehow this exposes us to a bug where unref()
is called on that object too many times, causing a segfault.
Undefining the cached object after we've used it once avoids this.
 2013-01-25 12:29:44 -08:00
Alessandro Ranellucci
18280da1b3 Bugfix: the non-manifold warning was spitting out wrong coordinates 2013-01-25 18:02:01 +01:00
Alessandro Ranellucci
f555a1ecc2 Replace 'Less' with 'Fewer' in plater. #944 2013-01-23 19:16:57 +01:00
Alessandro Ranellucci
94bb1e54bb Raise max temperatures (in GUI) to 400°C 2013-01-23 11:10:46 +01:00
Mike Sheldrake
65ef3b35d9 limit layer requests to object->layer_count when preparing skirt #901 
Each object on the plater was being queried for points for
producing the skirt for all skirt layers, even when the object was
shorter than the skirt.

layers of the print
 2013-01-18 08:36:01 -08:00
Alessandro Ranellucci
09bdd2ea5d Bump version number 2013-01-17 17:44:56 +01:00
Alessandro Ranellucci
71052433de Releasing 0.9.8 2013-01-17 15:50:45 +01:00
Alessandro Ranellucci
73c70021df Change toolchange and G92 E0 order for makerbot and sailfish G-code flavors. #855 2013-01-17 15:02:40 +01:00
Alessandro Ranellucci
177347137f New G-code flavor for Sailfish (thanks to fros1y for working on it). #826 2013-01-17 14:56:31 +01:00
Alessandro Ranellucci
8001059390 Add Mike Sheldrake in the About window 2013-01-17 14:13:25 +01:00
Alessandro Ranellucci
92feebf5fe Fixed regression introduced in 4d8757bf5d causing crash during support material generation 2013-01-17 12:32:57 +01:00
Alessandro Ranellucci
4d8757bf5d Interface support layers were clipped badly. Also, reduce simplification of the clipping boundaries. #583 2013-01-17 11:59:14 +01:00
Alessandro Ranellucci
4fc6fc5ab6 Increase default value for retract_length_toolchange 2013-01-17 11:51:00 +01:00
Alessandro Ranellucci
0ddd6d9e55 Require Math::Clipper 1.17 2013-01-17 11:11:22 +01:00
Alessandro Ranellucci
954520cba5 Enable cooling by default 2013-01-17 10:40:45 +01:00
Alessandro Ranellucci
ecc7e4560e Don't fill gaps if fill density is 0. #915 2013-01-17 10:39:05 +01:00
Mike Sheldrake
f3a1221039 per-thread clipper object for parallel support generation #888 2013-01-16 06:00:04 -08:00
Mike Sheldrake
241dff00e2 Merge branch '834-every-n-fill-frags' #834 2013-01-16 02:24:47 -08:00
Mike Sheldrake
85934e1738 use infill flow spacing, not perimeter, for combine_infill() clip offsets 2013-01-15 22:13:11 -08:00
Alessandro Ranellucci
4bff4d0d50 Ignore perimeter_acceleration and infill_acceleration if their values are 25 and 50 to handle legacy configs gracefully. 2013-01-15 12:52:22 +01:00
Mike Sheldrake
bce3e96210 extraneous fill against sloped walls with fill every N layers #834 
Polygons used for N x depth fill surfaces need to be offset
by flow spacing before they are reused to clip lower fill surfaces.
Otherwise thin fill sections remain on clipped layers against sloping
walls, and the N x depth fill collides with them.
 2013-01-14 21:18:31 -08:00
Mike Sheldrake
68fc91d854 offset miter limit to 3 - 801 828 836 851 875 - spikes and pimples 
Was set to 10 to address 801. Setting to 3 has the same effect for 801,
and avoids spike artifacts that are likely causing "spike and pimple"
problems in the referenced issues.
 2013-01-13 02:50:49 -08:00
Alessandro Ranellucci
ad9be0e4d7 Bugfix: crash when reading/writing files to paths containing non-ASCII characters on Windows. #651 #865 2013-01-13 10:18:34 +01:00
Alessandro Ranellucci
48e00a4c40 Merge branch 'master' into avoid-crossing-perimeters 
Conflicts:
	lib/Slic3r/GCode.pm
	lib/Slic3r/GUI/Plater.pm
	lib/Slic3r/Print.pm
	lib/Slic3r/SVG.pm
 2013-01-12 19:00:18 +01:00
Mike Sheldrake
73aae07e74 842, 847 slightly enlarge a clip polygon to counteract integer truncation 
Geomery in referenced issues triggered Clipper problems, but also
pointed to a situation where integer truncation (as coordinates pass
into Clipper) might be shrinking a clip polygon in a way that leaves
degenerate or unwanted thin clip results. Growing the clip polygon by 2
is expected to overcome any issues caused by truncation of floats.
 2013-01-11 10:15:42 -08:00
Alessandro Ranellucci
3d03faf0b2 Remove leftover M501 2013-01-10 17:19:38 +01:00
Alessandro Ranellucci
32fd58d531 Acceleration control. #185 2013-01-10 15:29:40 +01:00
Alessandro Ranellucci
7239ca18c1 Simple mode 2013-01-03 15:49:20 +01:00
Alessandro Ranellucci
cf4c090208 Added Preferences dialog 2013-01-02 20:30:48 +01:00
Alessandro Ranellucci
34e047205a Automatic detection of support material threshold angle 2013-01-02 19:40:48 +01:00
Alessandro Ranellucci
cbd298bc36 Alter extrusion width automatic calculation to take "native flow" into account 2013-01-02 19:22:51 +01:00
Alessandro Ranellucci
30d9b2e508 Refactoring: initialize all layers at once and avoid duplication of slicing height math. #637 2013-01-01 23:28:48 +01:00
Alessandro Ranellucci
1774143011 Bugfix: PlanePath fill patterns were not working anymore. #880 2012-12-31 14:11:36 +01:00
Alessandro Ranellucci
141a8d3989 Bugfix: some holes being closed incorrectly. #858 2012-12-30 17:57:30 +01:00
Alessandro Ranellucci
6e6bc74636 Added failing test case for troubleshooting unexpected filled holes. #858 2012-12-30 16:27:20 +01:00
Alessandro Ranellucci
0da71dbdfa Fix regression causing wrong number of solid shells when using fill_density = 0 (includes regression test) 2012-12-23 20:20:17 +01:00
Alessandro Ranellucci
e59ed7efb7 New toolchange_gcode option. #547 2012-12-23 16:29:08 +01:00
Alessandro Ranellucci
15f07197d8 Don't store ->surfaces anymore. Save memory, save time 2012-12-22 23:57:39 +01:00
Alessandro Ranellucci
5930267de9 Bugfix: some top/bottom solid shells are not treated as solid. #689 2012-12-21 20:25:48 +01:00
Alessandro Ranellucci
8cd8e8b209 Merge branch 'test-dual-retraction' 2012-12-21 15:23:07 +01:00
Alessandro Ranellucci
dc4ada2374 Fix retraction tests and fix retract_extra_length and lift in multiple extruders environments 2012-12-21 15:14:44 +01:00
Alessandro Ranellucci
701c98c5a7 Export Slic3r::Test::_eq() 2012-12-21 13:25:03 +01:00
Alessandro Ranellucci
d5537e7797 Enable retraction for support material too, but only when moving away from support islands. #831 2012-12-20 18:47:40 +01:00
Alessandro Ranellucci
bf603b0221 Fixed regression causing inefficient paths during infill 2012-12-20 18:10:20 +01:00
Alessandro Ranellucci
dcc0ce78db Fix warning 2012-12-20 17:03:50 +01:00
Alessandro Ranellucci
ea304a4803 Bugfix: custom layer G-code was applied before Z change, and not after like it was documented. #869 2012-12-20 17:01:01 +01:00
Alessandro Ranellucci
b70404bb23 Disable gap filling if gap fill speed is set to zero 2012-12-17 19:55:25 +01:00
Alessandro Ranellucci
1a3497b71d Add tests for vibration limiting and fix implementation. Also includes a fix in set_shift() 2012-12-09 18:33:25 +01:00
Alessandro Ranellucci
4078bb0476 Fix error when vibration limit is disabled 2012-12-06 10:54:28 +01:00
Alessandro Ranellucci
142a6cc4eb Add --vibration-limit back to CLI usage and disable it by default 2012-12-05 17:57:35 +01:00
Alessandro Ranellucci
ca0aa5c287 Apply vibration limit to every move except perimeters 2012-12-05 16:32:50 +01:00
Alessandro Ranellucci
25960a33e0 Put vibration limit back in GUI 2012-12-05 15:08:17 +01:00
Alessandro Ranellucci
cf32cd6510 Implement vibration limit using G4 pauses 2012-12-05 15:03:36 +01:00
Alessandro Ranellucci
f001374c6e New implementation of the little inwards move before leaving a loop. #186 2012-12-05 11:31:35 +01:00
Alessandro Ranellucci
283809f5c2 No need for a role to identify small perimeters 2012-12-05 10:47:41 +01:00
Alessandro Ranellucci
ac6dc67e6a Tidy 2012-12-05 01:12:50 +01:00
Alessandro Ranellucci
accc598eb5 Revert "Experimental feature: make a little move inwards by 45° after finishing the external perimeter and before retracting. #186" 
This reverts commit c57e94c065.

Conflicts:

	lib/Slic3r/GCode.pm
 2012-11-29 19:16:07 +01:00
Alessandro Ranellucci
b495e15d7f Fix plater slowness after the introduction of the vertical projection 2012-11-29 19:13:52 +01:00
Alessandro Ranellucci
93310a6a81 Fix bounding_box_center() 2012-11-24 00:15:02 +01:00
Alessandro Ranellucci
116ab446e3 Show vertical projection instead of convex hull for objects with <= 2000 facets. #780 2012-11-24 00:13:04 +01:00
Alessandro Ranellucci
e6afebb982 Bump version number 2012-11-23 19:37:41 +01:00
Alessandro Ranellucci
452b62e53d Releasing 0.9.7 2012-11-23 18:38:50 +01:00
Alessandro Ranellucci
12873e973b One more missing bit for gap_fill_speed 2012-11-23 18:37:47 +01:00
Alessandro Ranellucci
556e59bbe4 Last commit erroneously reverted gap fill speed 2012-11-23 17:41:15 +01:00
Alessandro Ranellucci
0f0992e39a Speed for support material. #813 2012-11-23 17:20:26 +01:00
Alessandro Ranellucci
d6d96391a9 Avoid overextrusion when support material spacing is configured to < the extrusion spacing. #821 2012-11-23 17:15:52 +01:00
Alessandro Ranellucci
e7b307df02 Expose gap_fill_speed in GUI 2012-11-23 17:09:59 +01:00
Alessandro Ranellucci
5dba02fdeb New separate speed setting for gap fill. #785 2012-11-23 11:25:02 +01:00
Alessandro Ranellucci
68e302fe27 Fix exporting G-code 2012-11-23 11:24:04 +01:00
Alessandro Ranellucci
21a6219b62 Disable vibration limit. #785 2012-11-23 11:14:06 +01:00
Alessandro Ranellucci
2abf2be781 New testing framework 2012-11-21 20:41:14 +01:00
Alessandro Ranellucci
8ae96a8868 Only apply vibration limit to gaps fill while it's not very mature to work with long segments 2012-11-21 19:27:38 +01:00
Alessandro Ranellucci
fc399d60e2 Raise the miter limit to avoid squaring corners too easily. #801 2012-11-20 17:43:20 +01:00
Alessandro Ranellucci
cd892fdce8 Connect zigzag gaps fill paths to benefit from simplification 2012-11-19 18:57:42 +01:00
Alessandro Ranellucci
e91320e031 Fix rotation for threaded perls 2012-11-19 18:31:41 +01:00
Alessandro Ranellucci
124a1fd84e Raise default frequency limit to 25Hz 2012-11-19 18:03:49 +01:00
Alessandro Ranellucci
de8a845d81 Disable retraction for support material 2012-11-19 18:03:20 +01:00
Alessandro Ranellucci
5678cd562c Fix preview after rotation in plater 2012-11-19 17:39:16 +01:00
Alessandro Ranellucci
99c942b5ea Merge branch 'vibration-limit' 2012-11-19 15:54:50 +01:00
Alessandro Ranellucci
3c7321ab80 Bugfix: some retractions between objects/copies were skipped. #786 2012-11-19 15:34:52 +01:00
Alessandro Ranellucci
300734db38 Emit M106 S0 instead of M107 for Teacup 2012-11-19 15:30:55 +01:00
Alessandro Ranellucci
183736dd9a Infill flow for bottom layer was calculated incorrectly when first_layer_height != layer_height 2012-11-19 12:37:05 +01:00
Alessandro Ranellucci
de0640603a Append full config when --gcode-comments is enabled 2012-11-18 19:53:52 +01:00
Alessandro Ranellucci
a66e8e547d Apply Douglas-Peucker to all paths before generating G-code 2012-11-18 18:00:33 +01:00
Alessandro Ranellucci
e119cee66c Don't emit warnings on unknown options 2012-11-18 17:42:52 +01:00
Alessandro Ranellucci
c99ff0cfe2 Apply Douglas-Peucker to all paths before generating G-code 2012-11-18 17:38:08 +01:00
Alessandro Ranellucci
08700aa942 Keep bridge flow unchanged even with the new overlapping spacing 2012-11-18 15:44:47 +01:00
Alessandro Ranellucci
427e3c1720 Keep bridge flow unchanged even with the new overlapping spacing 2012-11-18 15:42:59 +01:00
Alessandro Ranellucci
7a87a76391 Refactor frequency limit to avoid processing G-code 2012-11-18 15:28:13 +01:00
Alessandro Ranellucci
008633f013 Working implementation of frequency limit 2012-11-18 12:23:11 +01:00
Alessandro Ranellucci
f3164594eb More incomplete work 2012-11-18 11:33:53 +01:00
Alessandro Ranellucci
72007c4f6a Rewrite frequency limiting code 2012-11-17 18:07:13 +01:00
Alessandro Ranellucci
600e951fd8 Completed vibration limit 2012-11-17 12:08:19 +01:00
Alessandro Ranellucci
96dd106f61 Initial work for limiting vibrations 2012-11-17 10:40:15 +01:00
Alessandro Ranellucci
8d557bee8c Bugfix: AMF export was not working anymore. #799 2012-11-16 22:41:54 +01:00
Alessandro Ranellucci
7310cec087 Remove one more unused line 2012-11-16 22:09:32 +01:00
Alessandro Ranellucci
ed50aefa71 Remove unused code 2012-11-16 22:08:14 +01:00
Alessandro Ranellucci
ac5be309e3 Do not call merge_continuous_lines() anymore 2012-11-16 19:20:46 +01:00
Alessandro Ranellucci
aff0898f35 Typo 2012-11-16 18:24:09 +01:00
Alessandro Ranellucci
e13fe1d636 Raise overlap factor to 1 >:-) 2012-11-16 18:11:06 +01:00
Alessandro Ranellucci
86f5cb8654 Previous commit about bridge spacing was incomplete 2012-11-16 18:10:09 +01:00
Alessandro Ranellucci
a81377d684 Apply overlap factor to bridges too 2012-11-16 13:18:06 +01:00
Alessandro Ranellucci
1c2bc94d5a Bugfix: only_retract_when_crossing_perimeters might cause some missed retractions when printing multiple copies of the same object. #786 2012-11-16 12:39:55 +01:00
Alessandro Ranellucci
a1a12ffe8e Allow setting top-solid-layers and bottom-solid-layers to 0 independently 2012-11-16 12:37:47 +01:00
Alessandro Ranellucci
06b475a4ed Clone last_pos before storing it otherwise it will be translated. #786 2012-11-16 11:05:45 +01:00
Alessandro Ranellucci
b625c3b2b2 Simplify gaps fills to avoid some shaking 2012-11-16 10:47:42 +01:00
Alessandro Ranellucci
a5a0f32e19 Expose all SLIC3R_* environment variables as placeholders. #781 2012-11-16 10:07:30 +01:00
Alessandro Ranellucci
580e36eb25 Raise offset scale factor back to 100000 now that Clipper was updated 2012-11-15 10:09:29 +01:00
Alessandro Ranellucci
d3629a3a44 Require Math::Clipper 1.15. #779 2012-11-13 11:53:02 +01:00
Alessandro Ranellucci
8f0e388c5b Bump version number 2012-11-07 23:22:12 +01:00
Alessandro Ranellucci
af78469231 Releasing 0.9.5 2012-11-07 23:07:43 +01:00
Alessandro Ranellucci
93bb2c1056 Bugfix: fatal error when using brim and no skirt. #784 2012-11-07 23:06:32 +01:00
Alessandro Ranellucci
2e3110d2e4 Possible (or at least partial) workaround for the current Clipper segfault. #779 2012-11-07 15:23:01 +01:00
Alessandro Ranellucci
2ef90562ce Fixed regression causing first two layers to be infilled with parallel lines 2012-11-06 22:16:01 +01:00
Alessandro Ranellucci
e21c806ee9 New wkt() method for debugging 2012-11-06 20:31:50 +01:00
Alessandro Ranellucci
1db614a5a9 Revert "Use G92 to apply Z offset. #486" #778 2012-11-06 20:04:44 +01:00
Alessandro Ranellucci
ab2b31672f Fixed regression causing a long string between copies 2012-11-06 19:54:21 +01:00
Alessandro Ranellucci
68c2ac601b Bump version number 2012-11-05 23:38:55 +01:00
Alessandro Ranellucci
ed100c477c Releasing 0.9.4 2012-11-05 17:52:08 +01:00
Alessandro Ranellucci
0bff8ad576 Bugfix: some multimaterial files generated a fatal error 2012-11-05 15:59:31 +01:00
Alessandro Ranellucci
0a912c6316 Only apply min_skirt_length on bottom layer 2012-11-05 14:26:55 +01:00
Alessandro Ranellucci
68e1edab80 Require Math::Clipper 1.14 and increase scale factor for offset(). #720 2012-11-05 00:17:46 +01:00
Mark Hindess
705d6b3179 Quick fix for support material. 2012-11-02 22:39:08 +00:00
Alessandro Ranellucci
d67c07bd47 Fix typo causing incomplete honeycomb infill after recent refactoring 2012-11-01 18:32:35 +01:00
Alessandro Ranellucci
93a8391e18 Alternate gaps fill direction 2012-11-01 11:53:18 +01:00
Alessandro Ranellucci
37c0b45187 Detect gaps even after the desired number of perimeters has been generated 2012-11-01 11:51:52 +01:00
Alessandro Ranellucci
cb4ede7f9e Do not pass the Print object to SVG::output anymore 2012-11-01 11:34:53 +01:00
Alessandro Ranellucci
554d10c854 Only put ExtrusionPath objects in ExtrusionPath::Collection (no ExtrusionLoop objects) 2012-10-31 19:08:29 +01:00
Alessandro Ranellucci
d4ccd39ad3 Minor code cleanup 2012-10-30 15:53:01 +01:00
Alessandro Ranellucci
92ab53868e Remove unused methods 2012-10-30 15:49:11 +01:00
Alessandro Ranellucci
44d91774a6 Get rid of useless Slic3r::Fill instances 2012-10-30 15:38:17 +01:00
Alessandro Ranellucci
cec7bf815c Get rid of the ExtrusionLoop objects in concentric filler 2012-10-30 15:29:13 +01:00
Alessandro Ranellucci
20e73face2 Get rid of max_print_dimension in filler objects 2012-10-30 15:09:54 +01:00
Alessandro Ranellucci
6c97e588b1 Don't require the print object in filler objects 2012-10-30 14:34:41 +01:00
Alessandro Ranellucci
5943114574 Only take layer_id instead of layer in filler objects 2012-10-30 14:25:48 +01:00
Alessandro Ranellucci
61047f0df5 Define perimeter/infill overlap over spacing instead of width and increase it slightly to compensate 2012-10-30 14:21:59 +01:00
Alessandro Ranellucci
610862a97f Use the actual flow spacing for clipping concentric loops 2012-10-30 14:17:30 +01:00
Alessandro Ranellucci
0a5016a509 Cleaner usage of the PI constant 2012-10-30 14:15:48 +01:00
Alessandro Ranellucci
25d88bddff Remove the change_layer method 2012-10-30 14:11:32 +01:00
Alessandro Ranellucci
52ed2c6ea4 Make flow_spacing required for ExtrusionLoop objects too 2012-10-30 14:07:50 +01:00
Alessandro Ranellucci
be7e211bb6 Make flow_spacing required for ExtrusionPath objects 2012-10-30 14:07:01 +01:00
Alessandro Ranellucci
37637c34f5 Refactor shortest_path 2012-10-30 13:59:33 +01:00
Alessandro Ranellucci
4c6fe0b3d4 Fixed regression preventing lift to work correctly 2012-10-30 10:45:55 +01:00
Alessandro Ranellucci
887634e1e2 Use G92 to apply Z offset. #486 2012-10-29 19:54:04 +01:00
Alessandro Ranellucci
709cbc1c15 Fixed regression causing support material generation to fail under threaded perls 2012-10-29 19:38:40 +01:00
Alessandro Ranellucci
df4dcf0534 Move by 30° instead of 45° when completing an external loop. #186 2012-10-29 11:21:41 +01:00
Alessandro Ranellucci
9b94a661d9 Fixed regression causing too much clipping at the endpoints of loops 2012-10-29 11:20:27 +01:00
Alessandro Ranellucci
e9ae62a9d1 New --min-skirt-length option. #269 2012-10-29 11:17:57 +01:00
Alessandro Ranellucci
c25e54a830 Expose perimeter/infill/support material extrusion widths in G-code comments 2012-10-29 00:31:25 +01:00
Alessandro Ranellucci
f2389682b6 Factor out some hard-coded settings 2012-10-29 00:23:33 +01:00
Alessandro Ranellucci
1ecadc10fb Fixed regression causing one perimeter to be generated even when perimeters where set to 0. #759 2012-10-28 19:27:54 +01:00
Alessandro Ranellucci
8da4151c6d Fix regression causing skirt to be printed at Z = 0 after a recent commit 2012-10-28 19:24:24 +01:00
Alessandro Ranellucci
c57e94c065 Experimental feature: make a little move inwards by 45° after finishing the external perimeter and before retracting. #186 2012-10-28 19:15:34 +01:00
Alessandro Ranellucci
ecd054a57c Don't emit T0 at the beginning of the file, so that it's generated automatically just right before starting the print 2012-10-28 17:29:01 +01:00
Alessandro Ranellucci
935173047a Allow [print_center_X] and [print_center_Y] syntax for all coordinates settings (including bed_center etc.) and [temperature_0], [temperature_1] etc. for all index-based settings 2012-10-28 17:23:35 +01:00
Alessandro Ranellucci
ccb49a8439 Do a slightly thinner interface layer at the top of support material structures by taking into account the diameter of bridge extrudates (nophead's idea) 2012-10-28 16:59:20 +01:00
Alessandro Ranellucci
b5bd216f5c Do not combine infill for bottom layer 2012-10-28 14:23:47 +01:00
Alessandro Ranellucci
f35cdef2aa Renamed ExtrusionPath->depth_layers to height 2012-10-28 14:22:51 +01:00
Alessandro Ranellucci
2796041a6c Bugfix: --top-solid-layers was ignored. #769 2012-10-28 12:52:53 +01:00
Alessandro Ranellucci
deea02b444 Descriptive textual feedback for cooling settings 2012-10-28 12:43:41 +01:00
Alessandro Ranellucci
f9b6caaecb Bugfix, last commit was incomplete 2012-10-28 12:22:30 +01:00
Alessandro Ranellucci
a0fe93e8cf Bugfix: sometimes first layer extrusion width was not applied 2012-10-28 10:28:40 +01:00
Alessandro Ranellucci
49916b6178 Revert 2bcac88683 by setting the scale factor manually to 1. #720 2012-10-27 22:09:22 +02:00
Alessandro Ranellucci
d0bee4bf41 Fixed regression in Split. #766 2012-10-27 21:39:57 +02:00
Alessandro Ranellucci
bc9ff848dd Removed unused 'propgrid' import group from Wx. #764 2012-10-27 21:21:18 +02:00
Alessandro Ranellucci
f9e20db156 Update t/dynamic.t 2012-10-27 21:20:32 +02:00
Alessandro Ranellucci
b0f24a2666 Bugfix: unnecessary tool changes were generated when using the same tool for subsequent parts 2012-10-25 18:49:59 +02:00
Alessandro Ranellucci
667d88603e Reorder some options using the more compact layout 2012-10-25 12:37:02 +02:00
Alessandro Ranellucci
cee3864fc9 Independently set number of top/bottom solid layers. #676 2012-10-25 12:21:04 +02:00
Alessandro Ranellucci
bbd7765f40 Refactored the options group building to allow for more flexible layouts 2012-10-25 11:24:56 +02:00
Alessandro Ranellucci
31c2e50fc6 Bugfix: bed temperature wasn't being set after the first layer when first layer bed temperature was set to zero. #760 2012-10-24 22:57:19 +02:00
Alessandro Ranellucci
50f6909475 Don't apply slowdown factor to bridges. #640 2012-10-24 22:55:03 +02:00
Alessandro Ranellucci
392af5542b Show object information when double-clicking it in the plater 2012-10-24 22:44:08 +02:00
Alessandro Ranellucci
304676b6aa Use XML::SAX::ExpatXS if available 2012-10-24 20:36:32 +02:00
Alessandro Ranellucci
3c8ac435ad Remember last used filament presets when using multiple extruders too 2012-10-24 20:24:11 +02:00
Alessandro Ranellucci
355031fe2f Remove unnecessary retractions 2012-10-24 19:38:18 +02:00
Alessandro Ranellucci
44016b38c5 Distribute skirt loops across all extruders 2012-10-24 19:13:40 +02:00
Alessandro Ranellucci
f0d2b0e5ea Avoid overlapping regions (thanks Mike Sheldrake!). #726 2012-10-24 16:46:40 +02:00
Alessandro Ranellucci
1c50c8a401 Merge branch 'dynamic-flow' 2012-10-24 16:19:13 +02:00
Alessandro Ranellucci
6beaf5e597 New faster algorithm for filling gaps, while we work on a new medial axis implementation 2012-10-24 16:17:09 +02:00
Alessandro Ranellucci
1445820673 External perimeter first on bottom layer when brim is enabled. #761 2012-10-24 12:04:44 +02:00
Alessandro Ranellucci
1627268fd4 Merge branch 'master' into avoid-crossing-perimeters 
Conflicts:
	lib/Slic3r/GCode.pm
 2012-10-24 11:49:31 +02:00
Alessandro Ranellucci
19e77a28a1 Merge branch 'master' into dynamic-flow 2012-10-24 10:55:57 +02:00
Alessandro Ranellucci
28b56ae840 Force unfocusing of all input fields when saving a preset, otherwise the currently focused one might be ignored. #750 #624 2012-10-22 16:03:08 +02:00
Alessandro Ranellucci
c793a2657f Replace Math::ConvexHull with Math::ConvexHull::MonotoneChain. #722 2012-10-22 15:29:54 +02:00
Alessandro Ranellucci
68c3a0dd61 Make arcs.t happy. #721 2012-10-22 14:08:27 +02:00
Alessandro Ranellucci
33b1970b95 Incomplete commit broke the plater on threaded perls 2012-10-22 14:02:58 +02:00
Alessandro Ranellucci
0990a9418c Bugfix: honeycomb infill was overlapping too much with perimeters. #732 2012-10-22 13:38:37 +02:00
Alessandro Ranellucci
3c7785aaf3 Useless extra perimeters were generated sometimes. #444 #732 2012-10-22 13:21:11 +02:00
Alessandro Ranellucci
76f75db055 Always specify tool number in M104/M109 when printing with multiple extruders 2012-10-21 21:44:06 +02:00
Alessandro Ranellucci
4f1b56f004 Fix regression causing the plater to merge all materials into a single one, thus not producing multi-extrusion prints 2012-10-21 20:56:19 +02:00
Alessandro Ranellucci
f5f9574173 Merge pull request #722 from mesheldrake/remove-dups-before-hull 
use remove_coinciding_points before convex_hull
 2012-10-15 02:49:30 -07:00
Alessandro Ranellucci
149d9e737b Merge pull request #721 from mesheldrake/parallel-degrees-limit 
parallel_degrees_limit decreased, 3 to 0.1, #704
 2012-10-15 02:48:16 -07:00
Alessandro Ranellucci
50161497f3 Merge pull request #720 from mesheldrake/increase-offset-scale 
Increase scale factor for Clipper::offset
 2012-10-15 02:47:16 -07:00
Alessandro Ranellucci
6b4f038d17 Update copies number when decreasing parts. #747 2012-10-15 10:59:54 +02:00
Alessandro Ranellucci
769134bb6f Fixed regression causing skirt ignoring the first layer extrusion width override. #728 2012-10-15 10:57:15 +02:00
Alessandro Ranellucci
8ac367bfa7 If brim overlaps with skirt, make brim around skirt too instead of just ignoring skirt on first layer 2012-10-14 22:10:49 +02:00
Alessandro Ranellucci
b92642459f Merge branch 'master' into dynamic-flow 
Conflicts:
	lib/Slic3r/Flow.pm
	lib/Slic3r/Layer.pm
 2012-10-04 15:23:19 +02:00
Alessandro Ranellucci
d1e0bcf113 Bugfix: tool numbers written in G-code were wrong 2012-10-01 18:22:35 +02:00
Alessandro Ranellucci
1a6eaeaa91 Bugfix: split wasn't working properly under threaded perls 2012-10-01 18:12:14 +02:00
Alessandro Ranellucci
2c400ee2b8 Removed useless warning 2012-10-01 16:49:02 +02:00
Alessandro Ranellucci
faaf6d90b8 Bump version number 2012-09-28 17:44:38 +02:00
Alessandro Ranellucci
6bb4c28b01 Release 0.9.3 2012-09-28 17:06:19 +02:00
Alessandro Ranellucci
86e3508402 Add menu item pointing to documentation 2012-09-28 16:58:03 +02:00
Alessandro Ranellucci
22b312395a Fix SVG/DLP support material. #673 2012-09-28 16:32:53 +02:00
Alessandro Ranellucci
c68862582c Fix fatal error on empty layers caused by recent large refactorings 2012-09-28 15:48:32 +02:00
Alessandro Ranellucci
ab7697ec1c New option to force a solid layer every given number of layers. #617 2012-09-28 15:46:29 +02:00
Alessandro Ranellucci
f50b0040ef Bugfix: the grow() method wasn't working properly, causing bad brim/support material interface. #639 2012-09-28 15:27:33 +02:00
Alessandro Ranellucci
9ee9b54c73 Output an error if user tries to use 100% density with a non-solid fill pattern. #691 2012-09-28 14:13:06 +02:00
Alessandro Ranellucci
a49b045ce4 Do not call srand for each layer, to get better randomization of starting points. #694 2012-09-28 14:01:59 +02:00
Mike Sheldrake
4b91496edd use remove_coinciding_points before convex_hull 
convex_hull returns polygons with sharp concaves sometimes when
duplicate points are present
 2012-09-27 06:47:38 -07:00
Mike Sheldrake
5ee68aa916 $parallel_degrees_limit decreased, 3 to 0.1, #704 
Geometry::lines_parallel() test used for collapsing adjacent colinear
lines was too loose in testing for colinearity, because of this constant
setting. Gradualy curving and high-res outer perimiters would
over-simplify into straight lines.
 2012-09-27 06:14:54 -07:00
Mike Sheldrake
2bcac88683 Increase scale factor for Clipper::offset 
A default scale of 1 was being calculated most of the time. That's too
low to avoid artifacts from offsetting concave curves. Setting scale to
a default of 100000 eliminates artifacts in the test cases in issues
#700, #702 and #703. There is a risk of large point proliferation with
this scale in combination with the JT_ROUND option, but in the four
places where that option is used, scale is already explicitly set to a
safer low value.
 2012-09-27 05:50:54 -07:00
Alessandro Ranellucci
fd74577eae Fix typo in previous commit 2012-09-24 21:00:26 +02:00
Alessandro Ranellucci
d8c192ae05 Fix fatal error caused by recent refactorings 2012-09-23 18:07:44 +02:00
Alessandro Ranellucci
1f4706f02f [print_preset] and others were erroneously renamed to [print] etc. #675 2012-09-23 17:40:34 +02:00
Alessandro Ranellucci
77625894ff New command to combine multiple STL files into a single multi-material AMF file 2012-09-23 14:48:58 +02:00
Alessandro Ranellucci
bbe0a45b58 Optimization: cache scaled flow width and spacing 2012-09-23 03:03:08 +02:00
Alessandro Ranellucci
ec0d3987db Rename materials to regions 2012-09-23 02:52:31 +02:00
Alessandro Ranellucci
e696764af8 Assign extruders and flows to materials 2012-09-23 02:40:25 +02:00
Alessandro Ranellucci
e2ab340edb Fix positioning and other things 2012-09-22 21:03:57 +02:00
Alessandro Ranellucci
d488afd243 More work (breaks centering and internal surfaces detection) 2012-09-22 19:38:25 +02:00
Alessandro Ranellucci
02356fd613 Large refactoring to allow processing multimaterial files 2012-09-22 19:04:36 +02:00
Alessandro Ranellucci
04be94023b Refactoring: move the 'copies' property to each Print::Object 2012-09-22 16:19:24 +02:00
Alessandro Ranellucci
82ac4722d2 Refactoring, new size_3D function 2012-09-22 16:12:54 +02:00
Alessandro Ranellucci
b5672de3ca Refactoring, new bounding_box_3D function 2012-09-22 16:10:24 +02:00
Alessandro Ranellucci
91e9f651b5 Bugfix: --avoid-crossing-perimeters was crashing when processing empty layers 2012-09-22 15:51:18 +02:00
Alessandro Ranellucci
35e449e891 Make new plater compatible with threaded perls 2012-09-21 17:45:54 +02:00
Alessandro Ranellucci
037be34b7b Bugfix: removed fatal error when generating SVG support material in some circumstances. #673 2012-09-21 16:52:05 +02:00
Alessandro Ranellucci
c6c7dd12da Silently ignore threads > 1 on non-threaded perls 2012-09-21 16:43:46 +02:00
Alessandro Ranellucci
27b71d8885 Little regressions after recent merge 2012-09-21 16:08:22 +02:00
Alessandro Ranellucci
392309a369 Little cleanup 2012-09-21 15:58:44 +02:00
Alessandro Ranellucci
e21fdf0b15 Little cleanup 2012-09-21 15:47:38 +02:00
Alessandro Ranellucci
2f1ae3f112 Restore non-manifold warnings 2012-09-21 15:46:40 +02:00
Alessandro Ranellucci
c95cd5ac38 Merge branch 'master' into avoid-crossing-perimeters 2012-09-21 15:36:45 +02:00
Alessandro Ranellucci
46cbdcdc4e Merge branch 'master' into dynamic-flow 2012-09-21 15:36:33 +02:00
Alessandro Ranellucci
f638558167 Preserve position when splitting objects in plater 2012-09-21 15:35:32 +02:00
Alessandro Ranellucci
e40f32995f Finish GUI decoupling 2012-09-21 15:04:33 +02:00
Alessandro Ranellucci
8382eeef0a Revert "Patch for --gcode-arcs (kindly submitted by Paul Howes)" 
This reverts commit f4260ae93d.
 2012-09-21 15:04:19 +02:00
Alessandro Ranellucci
f659dcf088 Patch for --gcode-arcs (kindly submitted by Paul Howes) 2012-09-21 15:04:19 +02:00
Alessandro Ranellucci
757515ba17 New [print_preset], [filament_preset] and [printer_preset] variables. #675 2012-09-21 15:04:18 +02:00
Alessandro Ranellucci
4fbb8ffb9d Replace 'scale epsilon' with 'scaled_epsilon' 2012-09-21 15:04:18 +02:00
Alessandro Ranellucci
87912cb3b0 Bugfix: only_retract_when_crossing_perimeters was almost not working. #680 2012-09-21 15:04:18 +02:00
Alessandro Ranellucci
f314cedd8f Bugfix: extrusion width setting for support material was only affecting the path spacing but not the actual flow. #666 2012-09-21 15:04:17 +02:00
Alessandro Ranellucci
d848e2d4c9 Warn the user when Slic3r is being run under 5.16 2012-09-21 15:04:17 +02:00
Alessandro Ranellucci
e89f64e9d3 More unfinished work 2012-09-21 15:04:17 +02:00
Alessandro Ranellucci
6adf98edaf Fix regression causing SVG/DLP support material to crash the application. #668 2012-09-21 15:04:16 +02:00
Alessandro Ranellucci
37ae2e1e2d Use support material extruder for brim. #653 2012-09-21 15:04:16 +02:00
Alessandro Ranellucci
3b38e392ad Consider single walls as external perimeters. #661 2012-09-21 15:04:15 +02:00
Alessandro Ranellucci
47c5d410ea Remove the initial retraction compensation. Not only it is not very good for multi-head setups, but it also caused wrong first layer Z when lift was enabled. #655 2012-09-21 15:04:15 +02:00
Alessandro Ranellucci
152c714b87 Bump version number 2012-09-21 15:04:13 +02:00
Alessandro Ranellucci
d7e801fd32 Releasing 0.9.2 2012-09-21 15:04:13 +02:00
Alessandro Ranellucci
202bfa91c8 Adjust M-codes for temperature handling for Teacup. #539 2012-09-21 15:04:12 +02:00
Alessandro Ranellucci
94a096f1d2 Support legacy config files not containing first_layer_height #631 2012-09-21 15:04:11 +02:00
Alessandro Ranellucci
1cedb00f20 Merge branch 'master' into dynamic-flow 
Conflicts:
	lib/Slic3r/ExPolygon.pm
 2012-09-12 16:05:06 +02:00
Alessandro Ranellucci
cc8d8bd26f Merge branch 'master' into avoid-crossing-perimeters 
Conflicts:
	README.markdown
	lib/Slic3r/Config.pm
	lib/Slic3r/GCode.pm
	lib/Slic3r/Print.pm
	slic3r.pl
 2012-09-12 16:04:16 +02:00
Alessandro Ranellucci
2a51cad0c3 Revert "Patch for --gcode-arcs (kindly submitted by Paul Howes)" 
This reverts commit f4260ae93d.
 2012-09-12 15:58:01 +02:00
Alessandro Ranellucci
f4260ae93d Patch for --gcode-arcs (kindly submitted by Paul Howes) 2012-09-12 15:53:24 +02:00
Alessandro Ranellucci
7a5071f66c New [print_preset], [filament_preset] and [printer_preset] variables. #675 2012-09-12 15:29:44 +02:00
Alessandro Ranellucci
e0d5f4e528 Replace 'scale epsilon' with 'scaled_epsilon' 2012-09-12 15:22:43 +02:00
Alessandro Ranellucci
9934f8957f Bugfix: only_retract_when_crossing_perimeters was almost not working. #680 2012-09-12 15:20:37 +02:00
Alessandro Ranellucci
bb5f00cf0c Bugfix: extrusion width setting for support material was only affecting the path spacing but not the actual flow. #666 2012-09-12 12:13:43 +02:00
Alessandro Ranellucci
36796645cb Warn the user when Slic3r is being run under 5.16 2012-09-11 16:02:26 +02:00
Alessandro Ranellucci
628cc52338 Fix regression causing SVG/DLP support material to crash the application. #668 2012-09-06 11:28:24 +02:00
Alessandro Ranellucci
f41a6af343 Use support material extruder for brim. #653 2012-09-06 11:01:44 +02:00
Alessandro Ranellucci
1053947c19 Consider single walls as external perimeters. #661 2012-09-06 10:56:42 +02:00
Alessandro Ranellucci
e0a96c00b3 Remove the initial retraction compensation. Not only it is not very good for multi-head setups, but it also caused wrong first layer Z when lift was enabled. #655 2012-09-06 10:44:48 +02:00
Alessandro Ranellucci
8d7b781473 Bump version number 2012-08-31 00:12:13 +02:00
Alessandro Ranellucci
25f647a60c Releasing 0.9.2 2012-08-30 23:15:42 +02:00
Alessandro Ranellucci
5017f17171 Adjust M-codes for temperature handling for Teacup. #539 2012-08-30 23:13:28 +02:00
Alessandro Ranellucci
b37af86bef Support legacy config files not containing first_layer_height #631 2012-08-30 23:04:56 +02:00
Alessandro Ranellucci
191de5d078 Unfinished work for decoupling GUI from the Print object (goal = more speed for manipulation, less memory usage) 2012-08-29 19:37:27 +02:00
Alessandro Ranellucci
f29d455319 Refactor the AMF parser so that it popolates a Model object directly. Also read constellations 2012-08-29 18:23:34 +02:00
Alessandro Ranellucci
23f6842bd4 Export plates as AMF constellations 2012-08-29 17:12:32 +02:00
Alessandro Ranellucci
f90520ed06 Refactoring: new Slic3r::Model class to represent files 2012-08-29 17:12:32 +02:00
Alessandro Ranellucci
9bd1b0f6ba Revert "Refactoring: initialize all layers at once and avoid duplication of slicing height math". #637 
This reverts commit 08270022dd.
 2012-08-26 17:47:00 +02:00
Alessandro Ranellucci
08270022dd Refactoring: initialize all layers at once and avoid duplication of slicing height math 2012-08-25 20:40:44 +02:00
Alessandro Ranellucci
a1a4d97f9f Remove useless subroutines 2012-08-25 20:14:52 +02:00
Alessandro Ranellucci
a1ac866b84 Refactoring: turn x_length and y_length in size 2012-08-25 20:14:01 +02:00
Alessandro Ranellucci
896641cb7e Fixed regression causing some bridges not to be detected correctly. #629 2012-08-25 20:04:29 +02:00
Alessandro Ranellucci
fe6c8fabdb Make Josef Prusa and Petr Ledvinka happy while we figure out how to handle localized Windows file paths 2012-08-25 19:06:14 +02:00
Alessandro Ranellucci
873ea93832 Fix missing module inclusion preventing the recently introduced option from working 2012-08-25 17:18:12 +02:00
Alessandro Ranellucci
0c22250740 New option to disable retraction when moving between infill paths inside the same island. #29 2012-08-25 16:30:11 +02:00
Alessandro Ranellucci
af1b64a086 Added unit testing to prevent regression about disconnected infill paths 2012-08-25 14:59:34 +02:00
Alessandro Ranellucci
d061534b83 Merge branch 'master' into avoid-crossing-perimeters 
Conflicts:
	README.markdown
	lib/Slic3r/ExPolygon.pm
	slic3r.pl
 2012-08-25 14:26:32 +02:00
Alessandro Ranellucci
0aa224ffad Dynamic extrusion width for better gap filling 2012-08-25 14:23:46 +02:00
Alessandro Ranellucci
65b11fa850 Minor refactoring for better readability of perimeter generation logic 2012-08-24 21:58:51 +02:00
Alessandro Ranellucci
92518d28fc New option to configure the threshold for enforcing solid infill. #224 2012-08-24 19:38:36 +02:00
Alessandro Ranellucci
ba58e0733f Avoid backwards moves when doing honeycomb infill. #492 2012-08-24 19:19:45 +02:00
Alessandro Ranellucci
5281b101f9 Some infill paths were still disconnected, causing unnecessary retractions 2012-08-24 18:59:23 +02:00
Alessandro Ranellucci
56a118986f External motion was crossing still too much 2012-08-23 21:19:10 +02:00
Alessandro Ranellucci
c98e9515ed Better implementation of the external motion planner 2012-08-23 21:10:04 +02:00
Alessandro Ranellucci
27090f83bd Make the motionplanner work again after recent changes to approximation 2012-08-23 17:02:50 +02:00
Alessandro Ranellucci
ee41345ab0 Remove useless Point->id method 2012-08-23 15:46:55 +02:00
Alessandro Ranellucci
0eadc5adba Manual rebase of the avoid_crossing_perimeters feature 2012-08-23 15:42:58 +02:00
Alessandro Ranellucci
d278998f11 Accept newline as separator for post-processing scripts in GUI. #615 2012-08-22 21:27:49 +02:00
Alessandro Ranellucci
b35c41c1a3 Bugfix: retraction was still not working correctly at tool change 2012-08-22 20:31:03 +02:00
Alessandro Ranellucci
edfdf236da Fix for the recent commit about the new retraction settings 2012-08-22 19:47:59 +02:00
Alessandro Ranellucci
4bddb66513 Always emit T0 at the beginning of a multi-extruder print 2012-08-22 19:20:34 +02:00
Alessandro Ranellucci
9e682924c7 New separate options for retraction length to be used when switching tools 2012-08-22 19:11:45 +02:00
Alessandro Ranellucci
075213c731 Refactoring: make 'retracted' an attribute of the Extruder object 2012-08-22 18:57:03 +02:00
Alessandro Ranellucci
97c3756034 Don't force automatic unretraction after tool change 2012-08-22 18:06:50 +02:00
Alessandro Ranellucci
3c2464abf9 Bugfix: crazy temperatures were written when using sequential printing. #625 2012-08-22 17:58:38 +02:00
Alessandro Ranellucci
26e033a30c Bugfix: brim was positioned incorrectly if no skirt was enabled. #627 2012-08-19 20:30:17 +02:00
Henrik Brix Andersen
d6b06e08bc Bump version number 2012-08-19 09:49:43 +02:00
Nicolas Dandrimont
a147530d2a Explicitly avoid passing arguments to remove when called from the event handler 
Wx passes some objects to the callbacks, and we want to ignore those.
 2012-08-11 16:05:17 +02:00
Nicolas Dandrimont
7b0d4cb4e1 Revert "Dereference the Wx object id when removing an object in the plater." 
This reverts commit 4979029cd2.
 2012-08-11 16:00:41 +02:00
Nicolas Dandrimont
4979029cd2 Dereference the Wx object id when removing an object in the plater. 2012-08-11 15:49:06 +02:00
Alessandro Ranellucci
0833b4e021 Releasing 0.9.1 2012-08-10 16:14:35 +02:00
Alessandro Ranellucci
624e16b7e2 Unexpected results splitting objects with threaded perls. #610 2012-08-10 16:05:16 +02:00
Henrik Brix Andersen
2576e3b00a Remove XXX debug output 2012-08-09 23:37:15 +02:00
Alessandro Ranellucci
8289692160 Handle configuration files saved while there was no extruder_offset control for the first extruder 2012-08-09 19:57:49 +02:00
Alessandro Ranellucci
d02012e4a3 Accept multiple --load arguments for GUI too 2012-08-09 00:59:41 +02:00
Alessandro Ranellucci
db8bb8c3d8 Revert "Hide extruder offset settings for the primary extruder" 
This reverts commit 713d87b4c6.
 2012-08-09 00:51:53 +02:00
Alessandro Ranellucci
2bf219a637 Bugfix: random failure to load presets. #600 2012-08-09 00:41:03 +02:00
Alessandro Ranellucci
927b7ce937 Bugfix: skirt height and other options shouldn't be limited to 100. #597 2012-08-08 23:51:40 +02:00
Alessandro Ranellucci
88cbae0d48 Bugfix: saving a printer preset with less extruders than it had resulted in the same number of extruders as before 2012-08-08 22:52:26 +02:00
Alessandro Ranellucci
713d87b4c6 Hide extruder offset settings for the primary extruder 2012-08-08 22:14:05 +02:00
Alessandro Ranellucci
9ca21c835c Merge branch 'per-extruder-retraction-settings' 
Conflicts:
	lib/Slic3r/Config.pm
	lib/Slic3r/GUI/Tab.pm
 2012-08-08 22:06:47 +02:00
Alessandro Ranellucci
55b3b4f0c5 Bump version number 2012-08-08 22:04:06 +02:00
Henrik Brix Andersen
e2b2e369f8 Disable using ENTER key for accessing "Export G-code..." button. 2012-08-08 21:45:17 +02:00
Alessandro Ranellucci
4fcecf5ef6 Bugfix: when an external config was selected in any section, exported settings didn't reflect other sections properly 2012-08-08 19:36:34 +02:00
Alessandro Ranellucci
2f2bc8210a Allow exporting to .g files too 2012-08-08 19:04:36 +02:00
Alessandro Ranellucci
3888727b96 Bugfix: legacy config files with empty temperature and/or first_layer_temperature caused crash 2012-08-08 16:25:13 +02:00
Alessandro Ranellucci
b048f51edd Incomplete label for support material extruder option. #593 2012-08-08 15:21:02 +02:00
Alessandro Ranellucci
d4d305db3b Releasing 0.9.0 2012-08-08 12:29:15 +02:00
Henrik Brix Andersen
0f327ef912 Add missing use File::Spec 2012-08-07 23:37:16 +02:00
Alessandro Ranellucci
c7858912d8 Bugfix: some paths were not considered when generating brim 2012-08-07 22:04:58 +02:00
Alessandro Ranellucci
866b09f3f9 New --extruder-offset option 2012-08-07 21:39:45 +02:00
Alessandro Ranellucci
a2c28fd6da Move retraction settings to a temporary page until we merge the per-extruder-retraction-settings branch 2012-08-07 21:11:58 +02:00
Alessandro Ranellucci
cf01c142de Make retraction configurable for each extruder 2012-08-07 21:08:56 +02:00
Henrik Brix Andersen
640c07a233 Revert 4099c3a8cf 
Presenting detailed statistics about a given slice needs rethinking, as this solution will not scale.
 2012-08-07 21:00:03 +02:00
Alessandro Ranellucci
63e77fcfd8 Refactor extruder settings 2012-08-07 20:50:54 +02:00
Alessandro Ranellucci
106c8fe46f Minor reordering of infill options in GUI; also hide the entire staticbox if threads are not available 2012-08-07 20:22:26 +02:00
Alessandro Ranellucci
2548d5b993 Expose all multi-extruder settings to the GUI 2012-08-07 20:14:28 +02:00
Alessandro Ranellucci
793301d319 Allow to select multiple filaments in GUI when multiple extruders are configured 2012-08-07 18:44:47 +02:00
Alessandro Ranellucci
b7d8444ac8 Take support material into account when generating brim. #490 #501 #567 2012-08-06 20:54:49 +02:00
Alessandro Ranellucci
9bfa4118a1 Bugfix: brim and skirt collision was not precisely detected when they had similar offsets. #548 2012-08-06 20:27:10 +02:00
Alessandro Ranellucci
2616c24ffc Bugfix: plater wasn't initialized with last settings. #573 2012-08-06 19:19:22 +02:00
QuantumConcepts
6bcbc743dd Fixed #586. 2012-08-06 08:23:00 -04:00
Alessandro Ranellucci
a8e9b6926a Bugfix: each tab was loading too much from external config files 2012-08-06 13:03:44 +02:00
Henrik Brix Andersen
49b048c61d Include Wx version number in debug output 2012-08-04 22:19:42 +02:00
Henrik Brix Andersen
b1805ed7f3 Align controls and their associated labels vertically centered. 2012-08-02 23:44:42 +02:00
Henrik Brix Andersen
5518ac9fa6 Add small border on non-wxMAC platforms. Needs testing with wxWidgets 2.9.x on wxMSW + wxGTK. 2012-08-02 23:19:04 +02:00
Henrik Brix Andersen
c1e2bc5bd7 Make the wizard a tiny bit wider to fit the gcode_flavor drop-down under OS X. 2012-08-02 23:08:40 +02:00
Henrik Brix Andersen
ed89038f0b Add work-around for "Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 17". #558 2012-08-02 23:07:42 +02:00
Henrik Brix Andersen
794a090892 Pass explicit tool IDs to ::EnableTool() 2012-08-02 21:49:26 +02:00
Henrik Brix Andersen
69fa308f55 Allocate wxWidget identifiers dynamically to avoid potential conflics. 2012-08-02 21:11:36 +02:00
Henrik Brix Andersen
0e620f3ad2 Make --output accept directories. #535 2012-08-01 17:12:16 +02:00
Henrik Brix Andersen
d1b8f37dda Call print->config before print->expanded_output_filepath. #573 2012-08-01 16:06:03 +02:00
Henrik Brix Andersen
65d6eb551a Try harder to attract user attention on wxMAC. #575 2012-08-01 13:59:43 +02:00
Henrik Brix Andersen
83fccf0875 Fix auto-arrange of objects 2012-07-30 19:30:41 +02:00
Henrik Brix Andersen
0aae15e2a8 Persist last skein directory and last config directory used across application restarts. 2012-07-30 12:08:28 +02:00
Alessandro Ranellucci
0e39a89d01 Fixed regression preventing split from working. #395 2012-07-30 10:00:25 +02:00
Sam Wong
4099c3a8cf #568: Show filament needed statistics in the GUI message box. 2012-07-30 01:24:51 +08:00
Alessandro Ranellucci
4c33eabc6e Slicing from plater was still using the default options 2012-07-29 17:02:46 +02:00
Alessandro Ranellucci
9933132ae6 Bugfix: recent refactoring broke slicing from plater on multi-threaded perls 2012-07-29 15:51:26 +02:00
Alessandro Ranellucci
92754d7cd4 Fix multi-extruder options in GUI 2012-07-28 11:53:10 +02:00
Alessandro Ranellucci
87934a972c Port recent global changes to the wizard 2012-07-28 11:34:12 +02:00
Alessandro Ranellucci
c763f5fc81 Bugfix: fatal error with thin loops after recent refactoring. #562 2012-07-28 11:06:27 +02:00
Henrik Brix Andersen
57b134cc9c Handle recursive ratio_over options correctly. 2012-07-27 22:56:35 +02:00
Henrik Brix Andersen
d68ab84faa Fix quick slicing 2012-07-27 22:03:48 +02:00
Alessandro Ranellucci
7e34244b05 Refactored configuration handling. 
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
 2012-07-27 21:16:11 +02:00
Henrik Brix Andersen
f0579e59bd Include timestamp in .ini files 2012-07-27 14:33:14 +02:00
Henrik Brix Andersen
9f719d42bc Include preset name in confirmation dialog 2012-07-27 14:11:04 +02:00
Henrik Brix Andersen
9e1308c03f Ask for confirmation when deselecting a dirty preset. 2012-07-27 13:57:58 +02:00
Henrik Brix Andersen
848784ad95 Clear dirty when deleting preset. 2012-07-27 13:56:52 +02:00
Henrik Brix Andersen
40f1176346 Be careful not to change the current selection when working around http://trac.wxwidgets.org/ticket/13769 2012-07-27 13:54:45 +02:00
Henrik Brix Andersen
1cc0a79188 Allow the list and buttons to expand upon window resize 2012-07-26 16:50:57 +02:00
Henrik Brix Andersen
7b06255dca Center preset buttons 2012-07-26 16:48:28 +02:00
Henrik Brix Andersen
63e8299f14 Eliminate single-item wxSizer. 2012-07-26 16:41:22 +02:00
Henrik Brix Andersen
85603c1981 Highlight the dragged object. 2012-07-25 10:06:45 +02:00
Henrik Brix Andersen
affaee415b Reset mouse cursor on button up event. 2012-07-25 00:51:41 +02:00
Henrik Brix Andersen
5502537065 Change cursor when hoovering over a movable object. 2012-07-25 00:15:32 +02:00
Henrik Brix Andersen
e02ee17247 Respect multiline option flag. #559 2012-07-24 20:16:34 +02:00
Henrik Brix Andersen
0e6d6a9695 Force sane TAB key order on buttons in GridSizer. 2012-07-24 18:21:02 +02:00
Alessandro Ranellucci
1d364d7823 Refactor OptionsGroup to decouple it from the config repository, add ConfigOptionsGroup 2012-07-24 15:33:11 +02:00
Henrik Brix Andersen
09a222f8b2 Reshuffle code a bit to preserve TAB key order between toolbar and listctrl. 2012-07-24 14:42:38 +02:00
Henrik Brix Andersen
44f3b7d2b5 Allow TAB key navigation of controls. 2012-07-24 14:28:21 +02:00
Henrik Brix Andersen
0b0e531661 Use more generic EVT_KEY_DOWN(). 2012-07-24 14:17:10 +02:00
Henrik Brix Andersen
4bee713579 Add menuitems with keyboard shortcuts to quickly navigate between tabs. 2012-07-24 12:59:02 +02:00
Henrik Brix Andersen
4dc41d2ca3 Intercept TAB key events in the wxTreeCtrl and generate a wxNavigationKeyEvent. 2012-07-24 12:42:58 +02:00
Henrik Brix Andersen
69e075df82 Hidden Sizer items does not take up space, simply show/hide pages instead of removing/adding them. 2012-07-24 12:41:51 +02:00
Henrik Brix Andersen
642bb336eb Add the page before showing it. 2012-07-24 00:34:57 +02:00
Henrik Brix Andersen
37667d87ce Use Wx::Sizer::Detach() instead of Wx::Sizer::Remove() 2012-07-24 00:34:07 +02:00
Alessandro Ranellucci
ea604384dd Typo 2012-07-23 17:56:20 +02:00
Alessandro Ranellucci
ba475cae45 Fixed fatal error introduced after recent refactoring 2012-07-23 17:52:02 +02:00
Henrik Brix Andersen
6f6fb22657 Add menu item hints 2012-07-23 16:31:16 +02:00
Henrik Brix Andersen
ab9ffe9c19 Expose --external-perimeter-speed in the GUI. #556 2012-07-23 09:43:59 +02:00
Alessandro Ranellucci
67b415a2b3 Remove almost duplicated logic for small infill regions detection 2012-07-22 21:06:19 +02:00
Alessandro Ranellucci
144a704e3b Remove all id() and ordered_id() methods 2012-07-22 21:00:02 +02:00
Alessandro Ranellucci
1d04e15b63 Refactor/clean up. Merge remove_small_surfaces() into prepare_fill_surfaces(), rename infill_every_layers() to combine_infill(), remove $layer->fill_boundaries, initialize layer properties explicitely for clarity. 2012-07-22 21:00:02 +02:00
Henrik Brix Andersen
a5d683a9b9 Retire unused class variable 'fields'. 2012-07-22 15:23:42 +02:00
Henrik Brix Andersen
9486a629b3 Fix speling. 2012-07-22 15:06:56 +02:00
Alessandro Ranellucci
3edf42e98e Little workflow simplification 2012-07-21 15:53:38 +02:00
Alessandro Ranellucci
c7bc9bed46 Workaround for a perl 5.10 bug about leaked scalars. #503 2012-07-21 14:45:45 +02:00
Alessandro Ranellucci
f899deb6b6 Prevent internal infill at all when fill density is set to zero. #545 2012-07-21 14:41:21 +02:00
Alessandro Ranellucci
1fdbd2c0e1 Suggest repair in non-manifold warning 2012-07-21 12:07:02 +02:00
Alessandro Ranellucci
bce2663ed8 Restore thin walls and thin fills after last commit 2012-07-20 15:02:25 +02:00
Alessandro Ranellucci
e71472e5d7 Remove debugging statements 2012-07-20 14:41:27 +02:00
Alessandro Ranellucci
1697cb24a6 Memory optimization and code cleanup. Don't keep deserialized paths 2012-07-20 14:39:56 +02:00
Henrik Brix Andersen
52fb02f29d Turn nozzle count printf into debugf statement 2012-07-19 23:31:47 +02:00
Henrik Brix Andersen
35e6420ff5 Make the configuration wizard work on the first extruder. 2012-07-19 22:56:38 +02:00
Alessandro Ranellucci
30a2213fd9 Some multi-extruder options in GUI 2012-07-18 20:44:36 +02:00
Henrik Brix Andersen
9137a6b41e Queue a repaint when changing options page, fixes repaint issue on wxMSW. 2012-07-18 19:19:07 +02:00
Alessandro Ranellucci
b861560c71 Fix tooltips about extrusion widths 2012-07-18 18:16:27 +02:00
Alessandro Ranellucci
2495a77c0f Add to GUI the setting for support material extrusion width. Also, populate %Groups with new options 2012-07-18 18:15:18 +02:00
Alessandro Ranellucci
b209eab712 Bugfix: the delete button was deleting the wrong preset 2012-07-18 16:17:23 +02:00
Alessandro Ranellucci
f173096a6c Merge branch 'new-gui' 
Conflicts:
	lib/Slic3r.pm
	lib/Slic3r/Config.pm
	lib/Slic3r/GUI/OptionsGroup.pm
	lib/Slic3r/GUI/SkeinPanel.pm
	lib/Slic3r/Print.pm
 2012-07-18 15:48:04 +02:00
Alessandro Ranellucci
2d17a94a38 Prevent the left treectrl to grow if preset names are too long 2012-07-18 12:00:19 +02:00
Alessandro Ranellucci
42034ecb40 Autosize the main frame to workaround inconsistencies among wxGTK setups 2012-07-18 11:55:26 +02:00
Henrik Brix Andersen
fd88c164d2 Move Repeat Last Quick Slice below other Quick Slice items since it works for both. 2012-07-17 23:54:30 +02:00
Henrik Brix Andersen
a8d5ee3a74 Only enable Repeat Last Quick Slice menu item after the first quick slice. 2012-07-17 23:53:16 +02:00
Henrik Brix Andersen
c25a31ef98 Avoid SVG slicing interfering with repeating last quick slice. 2012-07-17 23:51:57 +02:00
Henrik Brix Andersen
bd16366d62 Default to "No" when prompting about discarding unsaved changes. 2012-07-17 23:24:21 +02:00
Henrik Brix Andersen
82cfc7c3d6 Check for unsaved presets before interactively loading an existing config file. 2012-07-17 23:16:58 +02:00
Henrik Brix Andersen
de47f5fe72 Use default desktop notification timeout. 2012-07-17 15:38:53 +02:00
Ryan Voots
19f4036d8a Time here is in milliseconds, setting it to 1500 to make it stay for at least 1.5 seconds. 2012-07-16 19:04:25 -04:00
Henrik Brix Andersen
3690b0798e Use Net::DBus instead of Gtk2::Notify due to less dependencies; recommended by @beanz. 2012-07-16 23:43:09 +02:00
Henrik Brix Andersen
095607a166 Remove excessive line breaks 2012-07-16 23:09:55 +02:00