Lukas Matena
dbedd3f9b0
Merge branch 'lm_painter_fixes'
2020-10-06 12:09:56 +02:00
Lukas Matena
8bcdbb7a60
Painter gizmos should now work with non-uniformly scaled models
2020-10-06 12:06:39 +02:00
Vojtech Bubnik
e407b79c94
Docker icon on OSX
2020-10-06 12:05:05 +02:00
Vojtech Bubnik
ecade4ac23
Fixed limitation of acceleration values written into G-code
...
in case the machine limits are disabled.
2020-10-06 10:24:06 +02:00
Vojtech Bubnik
7fbdda9080
Renamed monotonous infill to monotonic.
2020-10-05 16:38:28 +02:00
enricoturri1966
c94fb13369
AppConfig modified to generate a separate config file for the standalone gcodeviewer
2020-10-05 15:42:35 +02:00
Lukas Matena
4d3190f988
Changed cmake minimal version to 3.13 ( #4720 )
2020-10-05 12:10:19 +02:00
enricoturri1966
04a928b241
Follow-up of 8df01818dd
-> GCodeProcessor uses new Machine Limits limitations
2020-10-05 09:15:43 +02:00
bubnikv
8df01818dd
Limiting the application of Machine Limits
...
https://github.com/prusa3d/PrusaSlicer/issues/1212
WIP: The hints do not rescale when switching the "usage" combo box.
The new g-code time estimator needs to be updated to not read
the machine limits if not enabled.
2020-10-02 17:32:03 +02:00
enricoturri1966
0f44caa99c
ENABLE_SLOPE_RENDERING set as default
...
Slope rendering active only when using Gizmo FDM supports
2020-10-02 15:43:39 +02:00
enricoturri1966
11d8a2ad8e
Start PrusaSlicer in gcode viewer mode when dragging and dropping a .gcode file on the application icon
2020-10-02 11:40:21 +02:00
Lukáš Hejl
7a9aec2b0b
Connect infill with perimeters using hooks
2020-10-02 11:15:55 +02:00
enricoturri1966
1130778d5e
Small fix in debug tech ENABLE_GCODE_VIEWER_DATA_CHECKING
2020-10-02 09:14:43 +02:00
Lukáš Hejl
1a8a5984ad
Connect lines in the adaptive infill using hooks
2020-10-02 04:18:44 +02:00
YuSanka
2bba0e3131
Physical printers: Implemented import/export to/from the ConfigBundle.
...
+ fixed a bug : Case sensitivity of printer's name wasn't check during the adding of a new printer,
as a result in printers list was appeared both of printers (ex. "YuSanka" and "yusanka"), but related file was just one.
2020-10-01 22:48:57 +02:00
Lukas Matena
1ca8120398
Sphere selection added as an option for painting gizmos
2020-10-01 00:05:01 +02:00
Lukas Matena
c696e6ec19
Experiment with spherical cursor (painting gizmos)
2020-09-30 17:34:11 +02:00
enricoturri1966
980fe77b32
#4806 - Fixed detection of move type for G1 lines containing Z>0 and E>0
2020-09-30 08:34:29 +02:00
bubnikv
ab0890ed34
Merge remote-tracking branch 'remotes/origin/vb_modelobject'
2020-09-29 16:31:18 +02:00
Lukas Matena
48b0a14c4c
Fixup of previous commit
2020-09-25 13:00:43 +02:00
Lukas Matena
b178d0af38
Wipe tower - small refactoring and fix
...
Collection of data from internal wipe tower gcode generator now uses move semantics.
Part of gcode at the end of priming was erroneously not exported (extruder current reset etc.)
2020-09-25 12:35:20 +02:00
Lukáš Hejl
0b0709b3d8
Fix crash in adaptive infill when an extrusion line width is zero.
...
When an extrusion line width is set to zero, then an extrusion line width is calculated from nozzle diameter.
2020-09-25 09:54:27 +02:00
Vojtech Bubnik
e0b0a2cdcf
Fix of previous commit.
2020-09-24 20:32:52 +02:00
Vojtech Bubnik
7a799be426
DynamicPrintConfig::normalize() renamed to normalize_fdm(),
...
optimization of Print::apply()
2020-09-24 19:03:33 +02:00
Vojtech Bubnik
94aac4cf97
What MSVC could process I always wonder.
2020-09-24 15:45:04 +02:00
Vojtech Bubnik
54976e29bb
New class ModelConfig wrapping DynamicPrintConfig and a timestamp
...
to help with detecting "not changed" event when taking
Undo/Redo snapshot or synchronizing with the back-end.
Converted layer height profile and supports / seam painted areas
to the same timestamp controlled structure.
2020-09-24 15:34:13 +02:00
Vojtech Bubnik
0d6eb842b0
Merge branch 'vb_undoredo_timestamp'
2020-09-23 13:00:01 +02:00
Vojtech Bubnik
dde64d361b
Tiny polishing and documentation.
2020-09-23 12:59:15 +02:00
Vojtech Bubnik
0dad7adfa1
"There is an object with no extrusions on the first layer."
...
should throw SlicingError, not RuntimeError.
2020-09-23 12:58:58 +02:00
Vojtech Bubnik
056c46d01f
Undo/Redo serialization extension:
...
If an object indicates a valid timestamp, then the timestamp
is relied upon to not serialize the object data if the timestamp
of the same object on the undo/redo stack matches.
2020-09-23 12:18:39 +02:00
Lukas Matena
4bf49d960c
Merge branch 'lm_seam_painter_backend'
2020-09-22 21:02:07 +02:00
Lukas Matena
a13fc805d7
Removed obsolete wipe tower related code
...
Most of the code is already commented out for a long time, it should be safe to remove now.
2020-09-22 15:20:24 +02:00
Lukas Matena
e7ae26fb8a
Fix of #2834 (unretracted wipes on wipe tower)
...
Wiping moves performed before moving away from the wipe tower were replaced by
scheduling a regular wipe that is performed after normal gcode generator regains
control. This makes it consistent with wipes on the model and gets rid of the
unretracted wipes.
2020-09-22 15:20:19 +02:00
Vojtech Bubnik
230dbb7394
Adaptive Cubic infill:
...
1) Fixed a wrong offset when extracting infill lines from the octree.
2) Added a variant for testing triangle in a bounding sphere
when buildind the octree. Currently not used as the box test
is more tight.
3) "Bridging infill" regions are now triangulated and used to densify
the octree as well to support the bridging infill correctly.
2020-09-22 08:53:45 +02:00
Vojtech Bubnik
6cdb19971f
Fixed crash in Adaptive Cubic infill if just a single line was extracted.
...
New function to chain lines, however not used by the Adaptive Cubic infill.
2020-09-21 11:10:57 +02:00
Lukas Matena
cf50224248
Fix build on macOS and one logic error
2020-09-18 14:26:06 +02:00
Lukas Matena
6db2d3a0b2
Merge branch 'master' into lm_seam_painter_backend
2020-09-18 13:44:45 +02:00
Lukas Matena
f2951b53c0
Fix build on Linux
2020-09-18 13:37:37 +02:00
Vojtech Bubnik
348c654c26
Adaptive infill:
...
Fixing compilation on Linux,
WIP: Better chainining of infill lines.
2020-09-18 13:35:35 +02:00
Lukas Matena
8123930ee5
Store seam history for more islands
2020-09-18 12:20:02 +02:00
Lukas Matena
8dd345ed4c
use center of enforcer only with spAligned
2020-09-18 12:00:48 +02:00
Lukas Matena
fffb79a085
Simple implementation of spRandom
2020-09-18 12:00:40 +02:00
Lukas Matena
5d6bf3261e
fixed center-finding algorithm
2020-09-18 12:00:40 +02:00
Lukas Matena
e78221409a
Renamed CustomSeam to SeamPlacer, move to a separate file
2020-09-18 12:00:14 +02:00
Lukas Matena
a1fadaf955
Partially working implementation of custom seam backend
2020-09-18 12:00:14 +02:00
Vojtech Bubnik
7e756b20e6
Adaptive infill: Reshuffled the namespaces.
2020-09-18 10:53:50 +02:00
Vojtech Bubnik
37c5fe9923
Refactoring of adaptive cubic / support cubic:
...
1) Octree is built directly from the triangle mesh by checking
overlap of a triangle with an octree cell. This shall produce
a tighter octree with less dense cells.
2) The same method is used for both the adaptive / support cubic infill,
where for the support cubic infill the non-overhang triangles are
ignored.
The AABB tree is no more used.
3) Optimized extraction of continuous infill lines in O(1) instead of O(n^2)
2020-09-17 18:39:28 +02:00
enricoturri1966
fb4493c9d1
Restore estimated time lines in sidebar info
2020-09-17 11:42:58 +02:00
tamasmeszaros
af785d1486
Fix hollowing crash when splitting broken object has zero parts.
2020-09-16 11:08:58 +02:00
ardenpm
541c31afb0
Merge branch 'master' into pa_reprap_g10_temperature_support
2020-09-15 11:40:38 +10:00
Vojtech Bubnik
1eadb6a1a9
Replaced some of Slic3r::RuntimeError exceptions with Slic3r::SlicingError.
...
Only Slic3r::SlicingError are now displayed by a notification, other
exceptions are shown by a pop-up dialog.
2020-09-14 18:03:22 +02:00
Vojtech Bubnik
067cde85f1
WIP Refactoring of exceptions:
...
1) All slicer's exceptions are now derived from Slic3r::Exception.
2) New exceptions are defined for slicing errors.
3) Exceptions are propagated to the Plater to show.
It remains to modify the slicing back-end to throw the new SlicingError
exceptions instead of std::runtime_error and to show the other exceptions
by a message dialog instead of a notification.
2020-09-14 18:03:22 +02:00
Yuri D'Elia
cd4ad5e78b
Introduce ConfigOptionDef::is_code to select code_font()
2020-09-13 02:36:50 +02:00
Yuri D'Elia
a32bb59d8e
Do not include (incorrect!) seconds in get_time_dhm
2020-09-12 18:20:22 +02:00
Yuri D'Elia
776a775996
Add missing forward declarations
2020-09-11 16:51:05 +02:00
enricoturri1966
dd6994c3b2
Logging of memory used by the gcode processor and viewer
2020-09-11 15:19:23 +02:00
Lukáš Hejl
137e7a0712
Fix compiler warnings and failing compilation on macOS
2020-09-10 22:57:58 +02:00
Lukáš Hejl
7ef5def077
Fix typo in function build_octree
2020-09-10 22:38:37 +02:00
Lukáš Hejl
e9a325c9ca
Fix rotation in support cubic infill
2020-09-10 22:30:49 +02:00
tamasmeszaros
7766c6ebc4
Merge branch 'tm_rotfinder'
2020-09-10 20:06:18 +02:00
tamasmeszaros
20bd7b99f9
Significant performance improvements for elevated and non-elevated case
...
Apply bruteforce for elevated models
2020-09-10 19:35:45 +02:00
YuSanka
f1f9785a8a
SplashScreen:
...
* Show it on the display same as an Application
* Code refactoring : All related functions moved to the SplashScreen class
* Add a possibility o hide/show splash scree in Preferences
2020-09-10 18:54:29 +02:00
Lukáš Hejl
40a7a44495
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-09-10 17:02:54 +02:00
Lukáš Hejl
f49144a9ef
Move support cubic infill to separate class.
...
Support infill is enabled in the GUI.
2020-09-10 16:53:08 +02:00
Lukáš Hejl
8fb9b290b2
A prototype of adaptive support infill
2020-09-10 14:55:48 +02:00
Lukáš Hejl
680b1b9809
Construct octree based on inserted points
2020-09-10 14:52:26 +02:00
Lukáš Hejl
c261624999
A simple version of adaptive cubic support, for testing purposes
2020-09-10 14:52:26 +02:00
Lukáš Hejl
e55d184a7d
Fix missing initialization in TriangleMesh constructor
2020-09-10 14:52:26 +02:00
Lukáš Hejl
70cb67430c
Move rotation from building octree to infill generating
2020-09-10 14:52:21 +02:00
enricoturri1966
131cc0a41c
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-09-10 14:35:40 +02:00
enricoturri1966
b991b613de
Updated titlebar and splash screen + hidden statusbar for gcode viewer
2020-09-10 14:33:55 +02:00
tamasmeszaros
d527122046
Performance optimizations and bugfix
2020-09-10 14:03:30 +02:00
tamasmeszaros
3b7ea5587e
Fix build on win
2020-09-10 14:03:30 +02:00
tamasmeszaros
0d4c67b9a3
Mostly working, inefficiencies remain, status indication partly broken
2020-09-10 14:03:30 +02:00
tamasmeszaros
b4b9af4100
cosmethics
...
Comments and cosmethics
2020-09-10 14:03:30 +02:00
tamasmeszaros
c10ff4f503
fixing optimizer and concurrency::reduce
2020-09-10 14:03:30 +02:00
tamasmeszaros
c193d7c930
Brute force optimization code, buggy yet
...
wip
wip
wip refactor
2020-09-10 14:03:30 +02:00
tamasmeszaros
b4e30cc8ad
rotation finder experiments
...
wip
2020-09-10 14:03:30 +02:00
tamasmeszaros
7713a55d45
Do a mesh split before openvdb conversion, unify each part's grid
...
Do a mesh redistance after the part splitting and openvdb csgUnion
2020-09-10 13:39:43 +02:00
tamasmeszaros
50836914fc
Calibration changes to address new algorithm behavior.
2020-09-10 13:37:58 +02:00
tamasmeszaros
a21ff4141b
Fix failing test due to changes in support point genertion
2020-09-10 13:19:17 +02:00
tamasmeszaros
26d5c30366
Improvements to support point generator
...
- Separate the 3 bands -- dangling, sloping and full overhanging -- regions and handle them with different support force deficits.
- Use a heuristic for overhanging edges to increase the number of support points generated for them
- Try to make overhangs and slopes deficit depend on stable area.
2020-09-10 13:19:17 +02:00
enricoturri1966
659c24d3d8
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-09-10 08:50:00 +02:00
enricoturri1966
88457bf412
Tech ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION set as default
2020-09-10 08:49:50 +02:00
Vojtech Bubnik
6a11e7996e
Merge branch 'lh_adaptive_infill'
2020-09-09 16:46:43 +02:00
Vojtech Bubnik
7b318e1698
Refactoring of adaptive cubic infill:
...
Don't create an octree for the infill if it is not needed.
2020-09-09 15:55:06 +02:00
enricoturri1966
3527cd48e8
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-09-09 15:04:40 +02:00
enricoturri1966
2f9dd9d9e8
Completed implementation of 'File->GCode preview...' command
2020-09-09 15:03:51 +02:00
Lukáš Hejl
5e9399247c
Check if exist any boundary polyline
2020-09-09 14:40:14 +02:00
Lukáš Hejl
5633526ecf
Enable changing adaptive infill density for different objects
2020-09-09 14:40:14 +02:00
Lukáš Hejl
aca212c5bc
Octree representation rework
2020-09-09 14:40:14 +02:00
Lukáš Hejl
acedb66cdc
Change to using raw_mesh instead of mesh
2020-09-09 14:40:14 +02:00
Lukáš Hejl
000987451a
Fix bug in lines merging
2020-09-09 14:40:14 +02:00
Lukáš Hejl
03e103fcc8
Connect infill to perimeters
2020-09-09 14:40:14 +02:00
Lukáš Hejl
398d429ce1
Code cleanup
2020-09-09 14:40:14 +02:00
Lukáš Hejl
d09ac41d2c
Octree's first cube depends on model size.
2020-09-09 14:40:14 +02:00
Lukáš Hejl
2debffc496
Fix tests which expect make_fills without arguments
2020-09-09 14:40:14 +02:00
Lukáš Hejl
33121b705a
Change in passing octree struct
2020-09-09 14:40:08 +02:00
Lukáš Hejl
9eeb5e4364
Fix wrong data type
2020-09-09 14:37:20 +02:00
Lukáš Hejl
65ba40f044
Fix crash on inconsistent input
2020-09-09 14:37:20 +02:00
Lukáš Hejl
867681ae56
Fix discontinuous extrusion lines for adaptive infill
2020-09-09 14:37:20 +02:00
Lukáš Hejl
14a7fbc9f7
Switch to smart pointers
2020-09-09 14:37:17 +02:00
Lukáš Hejl
c0d21bd2b4
Polylines merging
2020-09-09 14:34:04 +02:00
Lukáš Hejl
c311b84b21
Add function for check existence of triangle in define radius
2020-09-09 14:34:04 +02:00
Lukáš Hejl
9f049b2619
Generating polylines from octree
2020-09-09 14:34:04 +02:00
Lukáš Hejl
34f38c4a79
Building octree based on distance from mesh
2020-09-09 14:34:04 +02:00
Lukáš Hejl
0d26df3cf6
Preparation for new infill
2020-09-09 14:34:04 +02:00
enricoturri1966
d8530e7d9f
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-09-09 09:12:56 +02:00
enricoturri1966
6b10214bec
Fixed export of pause print lines into gcode
2020-09-09 09:06:50 +02:00
enricoturri1966
8cb2636afc
Fixed conflicts after merge with master
2020-09-08 15:38:35 +02:00
Vojtech Bubnik
ce06fc6cb7
Added networking support for SL1 Digest authorization.
...
Renamed login/password/authorization_type to printhost_user/printhost_password/printhost_authorization_type.
Added initialization of physical printer preset with default values.
2020-09-08 15:31:10 +02:00
enricoturri1966
67d10a3c0c
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-09-08 11:55:35 +02:00
enricoturri1966
f58d3116bf
Fixed crash when loading gcode files saved with older version of PrusaSlicer 2.3.0.alpha
2020-09-08 11:43:18 +02:00
enricoturri1966
ab556a398b
GCode viewer using the proper layout when started as a standalone application
2020-09-08 11:40:06 +02:00
enricoturri1966
8579184d70
Follow-up of 573194e059
-> Fixed crash when opening a gcode file
2020-09-07 11:30:31 +02:00
Lukáš Hejl
97e62be902
Check if exist any boundary polyline
2020-09-07 09:14:06 +02:00
enricoturri1966
e10d1eba54
GCodeProcessor -> Use decorations to detect toolpaths height for gcode files generated by PrusaSlicer
2020-09-07 08:35:34 +02:00
Lukáš Hejl
6c01d537e4
Enable changing adaptive infill density for different objects
2020-09-03 23:15:46 +02:00
Lukáš Hejl
ce18b824ad
Octree representation rework
2020-09-03 19:21:55 +02:00
Lukáš Hejl
c2af265df8
Change to using raw_mesh instead of mesh
2020-09-03 16:08:40 +02:00
Lukáš Hejl
184cb7afd9
Fix bug in lines merging
2020-09-03 14:28:25 +02:00
Lukáš Hejl
353c65fa4c
Connect infill to perimeters
2020-09-03 13:05:28 +02:00
Lukáš Hejl
a3a1c20172
Code cleanup
2020-09-03 11:56:41 +02:00
enricoturri1966
573194e059
GCodeProcessor -> Added cancel callback
2020-09-03 08:32:06 +02:00
Lukáš Hejl
fd3a31651c
Octree's first cube depends on model size.
2020-09-03 08:04:05 +02:00
Lukáš Hejl
71237cf11f
Fix tests which expect make_fills without arguments
2020-09-03 07:52:53 +02:00
Lukáš Hejl
5997f2759c
Change in passing octree struct
2020-09-02 22:53:10 +02:00
YuSanka
4d053cc4ee
Merge remote-tracking branch 'origin/master' into ys_unsaved_changes
2020-09-02 09:15:11 +02:00
Lukas Matena
7844ca12fa
First naive prototype of seam painter
2020-09-02 00:36:30 +02:00
Lukas Matena
60cf002e94
Fixed merge conflicts (whitespace only)
2020-09-02 00:36:30 +02:00
Lukas Matena
6646198a9b
Merge branch lm_seam_painter_frontend
2020-09-01 23:03:16 +02:00
Lukas Matena
9c59b4f930
Custom seam: Model integration, backend invalidation, 3MF loading/saving
2020-09-01 22:35:01 +02:00
Lukas Matena
255469347f
Fixed several indentation-related warnings
2020-09-01 18:18:56 +02:00
tamasmeszaros
761e71eb63
Fix build on msvc
2020-09-01 18:18:56 +02:00
Lukas Matena
1eef1d32a0
Added two missing includes to fix build on gcc
2020-09-01 18:12:51 +02:00
bubnikv
08580a9b18
WIP: prusa-gcodeviewer command line wrapper to start the PrusaSlicer
...
in standalone G-code viewer mode.
Linux and OSX stuff will follow.
2020-09-01 16:56:12 +02:00
Vojtech Bubnik
683af51685
Replaced boost::filesystem::canonical() with boost::filesystem::absolute(),
...
as canonical() is broken on Windows (reparse points aka symbolic links
are not processed correctly).
Fixes
https://github.com/prusa3d/PrusaSlicer/issues/732
https://github.com/prusa3d/PrusaSlicer/issues/3956
https://github.com/prusa3d/PrusaSlicer/issues/4557
2020-09-01 14:15:37 +02:00
enricoturri1966
e32930aa6c
Code cleanup
2020-09-01 09:28:02 +02:00
enricoturri1966
bf7b952eff
GCodeViewer -> Smoothed solid toolpaths corners
2020-09-01 08:29:06 +02:00
Lukáš Hejl
423d1f2f40
Fix wrong data type
2020-08-31 08:49:17 +02:00
Lukáš Hejl
8e6760e033
Fix crash on inconsistent input
2020-08-30 20:38:07 +02:00
enricoturri1966
b563010bf1
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-28 12:30:45 +02:00
enricoturri1966
93921dc7c8
ENABLE_GCODE_VIEWER -> Experimental taskbar icon
2020-08-28 08:54:58 +02:00
tamasmeszaros
79567a1958
Add some comments for png read interface
2020-08-27 23:14:42 +02:00
tamasmeszaros
ad0df8fd09
Be compatible with earlier libpng versions.
2020-08-27 23:14:42 +02:00
tamasmeszaros
b09552e56f
Don't use fmemopen, its not standard.
2020-08-27 23:14:42 +02:00
tamasmeszaros
8541ce4060
SLA archive import will now recover the model's original position.
2020-08-27 23:14:42 +02:00
tamasmeszaros
769ee15475
Move SLA import to libslic3r with png reading using libpng
...
Also fix flipped object issue
2020-08-27 23:14:42 +02:00
tamasmeszaros
2bcd36d155
PNG image read with libpng
2020-08-27 23:14:42 +02:00
tamasmeszaros
19e1d877aa
Don't use sla::EncodedRaster in SLAImport, revive opencsg sandbox
2020-08-27 23:14:42 +02:00
enricoturri1966
e22e85e8e2
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-27 13:11:49 +02:00
Lukáš Hejl
b28f9b8935
Fix discontinuous extrusion lines for adaptive infill
2020-08-27 13:04:53 +02:00
bubnikv
17170b81b5
Clean-up of Shiny profiler integration, so that the intrusiver profiling
...
can be controlled per module.
2020-08-27 12:14:49 +02:00
enricoturri1966
689c8691ee
Another code cleanup
2020-08-27 10:15:07 +02:00
enricoturri1966
af30a3ab7e
Code cleanup
2020-08-27 09:13:30 +02:00
enricoturri1966
88b6835258
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-27 08:00:45 +02:00
Lukáš Hejl
c5a73a7cd6
Switch to smart pointers
2020-08-27 07:28:43 +02:00
Lukáš Hejl
cb328c99aa
Polylines merging
2020-08-27 01:59:35 +02:00
Lukáš Hejl
fb24d8167a
Add function for check existence of triangle in define radius
2020-08-26 23:28:52 +02:00
Lukáš Hejl
eaaff4e707
Generating polylines from octree
2020-08-26 22:18:51 +02:00
bubnikv
41f474a884
Fixed performance issues when adding / removing Presets into PresetCollection.
...
This improves application startup time by 25-33%.
2020-08-26 21:51:50 +02:00
Lukáš Hejl
3ac16d9c9c
Building octree based on distance from mesh
2020-08-26 18:15:59 +02:00
Lukáš Hejl
42a7f2b1d8
Preparation for new infill
2020-08-26 16:51:34 +02:00
enricoturri1966
ba9c3a74ed
GCodeViewer -> 1st iteration of rendering of extrude toolpaths as solid
2020-08-26 15:29:33 +02:00
enricoturri1966
e4f767b2ed
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-24 15:11:15 +02:00
Lukas Matena
c51a45ee0f
Drainholes are saved elevated for 3MF compatibility
...
This is a follow-up of previous commit
2020-08-24 08:11:12 +02:00
Lukas Matena
a95509ce36
Changed internal coordinates of drain holes
...
Drain holes reference position was saved slightly above the mesh to avoid problem when the hole is placed on flat or nearly flat surface
The depth of the hole was internally bigger than what the user has set to compensato for it
However, this leads to problem with scaling and makes reprojection of the holes on the mesh complicated
This commit changes the reference point to the point on the mesh and the extra elevation is handled when rendering and drilling the hole.
The change is reflected in 3MF drain holes versioning so that old 3MFs are loaded correctly.
Reprojection on the mesh after reload from disk/fix through netfabb has been enabled.
2020-08-24 08:11:12 +02:00
enricoturri1966
34759f9a70
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-21 11:10:27 +02:00
enricoturri1966
7a093b08fd
GCodeViewer -> Show printbed model and texture for system printers detected when loading gcode files produced by PrusaSlicer
2020-08-21 10:59:07 +02:00
Paul Arden
f6d25d0634
Rework G10 temperature support to be enabled only for a new Firmware type RepRapFirmware
leaving the RepRap/Sprinter
behaviour alone. Rename the enum for gcfRepRap
to gcfRepRapSprinter
and add new gcfRepRapFirmware
enum value. Also adds code to only use the G10 searching in custom G-code if the flavour is RepRapFirmware.
2020-08-21 14:08:32 +10:00
Lukas Matena
739cd2a4a2
Fixed several indentation-related warnings
2020-08-19 17:15:01 +02:00
YuSanka
15545bbd90
Merge remote-tracking branch 'origin/master' into ys_unsaved_changes
2020-08-19 15:44:24 +02:00
enricoturri1966
af200e47c1
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-19 08:18:23 +02:00
tamasmeszaros
5052149b81
Fix build on msvc
2020-08-18 13:45:18 +02:00
enricoturri1966
bd4e4535f9
GCodeProcessor -> Calculate per layer time estimate
2020-08-18 12:37:07 +02:00
Lukas Matena
6db1e5ab8f
Slight code cleanup
2020-08-18 12:00:26 +02:00
Lukas Matena
97bc092cce
Renamed FacetSupportType to EnforcerBlockerType
...
So it's not misleading if we use it for seam painting
2020-08-18 12:00:26 +02:00
tamasmeszaros
4ef52af906
Add dedicated tests for support point generation
2020-08-18 11:41:14 +02:00
enricoturri1966
ca27d7296f
Fixed build when ENABLE_GCODE_VIEWER is disabled
2020-08-18 08:27:07 +02:00
enricoturri1966
c81d87b470
Code cleanup
2020-08-17 15:59:36 +02:00
enricoturri1966
73603e4937
GCodeProcessor -> Do not export width tags to gcode
2020-08-17 14:37:26 +02:00
enricoturri1966
b156153405
GCodeViewer -> Use rounded values for toolpaths height, width and volumetric rate to reduce the number of generated paths
2020-08-17 13:07:13 +02:00
enricoturri1966
5b579aee9a
GCodeProcessor -> Extract toolpaths width from gcode moves
2020-08-17 10:54:41 +02:00
enricoturri1966
f2d02faef4
GCodeProcessor -> Added debug code to check toolpaths data extracted from gcode, as mm3 per mm, height and width
2020-08-17 10:06:41 +02:00
YuSanka
618f04717f
Unsaved Changes : improvement for the GUI_App::check_unsaved_changes()
...
Added use of UnsavedChangesDialog
2020-08-14 18:17:16 +02:00
enricoturri1966
6a603eed25
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-14 11:45:54 +02:00
tamasmeszaros
add3894e8c
Add reserve_vector to libslic3r.h to be globally usable.
2020-08-13 15:42:31 +02:00
tamasmeszaros
7158690ddd
Fix build on win and rpi
2020-08-13 15:09:22 +02:00
tamasmeszaros
1003c32f76
Merge branch 'tm_minor_refactor'
2020-08-13 14:36:47 +02:00
tamasmeszaros
929cea59f3
replace ccr_::enumerate with flexible for_each
...
enumerate is unusual and would only work effectively with random access iterators
this for_each takes advantage of tbb blocked_range
replace ccr_::enumerate with flexible for_each
enumerate is unusual and would only work effectively with random access iterators
this for_each takes advantage of tbb blocked_range
2020-08-13 14:35:14 +02:00
tamasmeszaros
9486901b93
Minor change to SLAPrinter interface
2020-08-13 14:35:14 +02:00
enricoturri1966
b80bde11f3
GCodeProcessor -> Extract toolpaths height from gcode moves
2020-08-13 12:51:50 +02:00
enricoturri1966
7be5860908
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-12 15:07:31 +02:00
Lukas Matena
6d4bb10ec5
Fix of custom supports: object offset for Clipper was incorrectly accounted for
2020-08-12 11:28:30 +02:00
Lukas Matena
fd93d9768d
Fixes of two crashes in paint-on supports
2020-08-12 11:08:10 +02:00
Vojtech Bubnik
12f43736bd
Fix of Support generator debugging functions after some refactoring
2020-08-12 10:51:15 +02:00
enricoturri1966
4ca026d4b6
ENABLE_GCODE_VIEWER -> More general drag and drop for .gcode files
2020-08-11 15:44:32 +02:00
enricoturri1966
5a0e048079
ENABLE_GCODE_VIEWER -> Drag and drop .gcode files into gcode viewer
2020-08-11 14:23:47 +02:00
enricoturri1966
5882c121cc
GCodeProcessor -> Fixed time estimate for stealth mode
2020-08-11 11:12:30 +02:00
enricoturri1966
dea641183c
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-08-10 14:22:46 +02:00
enricoturri1966
6ed2cb661d
GCodeProcessor -> Export remaining time (lines M73) to gcode
2020-08-10 14:22:05 +02:00
YuSanka
f9e47b2702
Code refactoring: AppConfig.cpp(hpp) are removed from the GUI to libslic3r
2020-08-08 17:03:20 +02:00
enricoturri1966
64001c0fe5
GCodeProcessor -> Fixed export of estimated time to gcode filename
2020-08-07 15:30:08 +02:00
YuSanka
a6dc3d37f5
Merge remote-tracking branch 'origin/master' into ys_ph_printers
2020-08-06 17:02:48 +02:00
Lukas Matena
41b1dc3d80
Fix of custom supports 3MF loading
...
Multiple-part objects were not handled correctly
2020-08-06 14:08:05 +02:00
enricoturri1966
2aa1c2776c
GCodeViewer -> Estimated printing times shown in the legend
2020-08-06 10:15:34 +02:00
enricoturri1966
8fc5be7e4f
Refactoring to allow to quickly build the various options to show the estimated printing time in gcode viewer scene
2020-08-05 15:43:46 +02:00
enricoturri1966
25c3552555
Fixed conflicts after merge with master
2020-08-04 09:58:19 +02:00
tamasmeszaros
0614d6d4a8
Remove leftover junk comments
2020-08-03 19:07:30 +02:00
tamasmeszaros
f3c0bf46d4
finish optimizer interface and remove commented code
2020-08-03 19:06:57 +02:00
tamasmeszaros
927b81ea97
Working small-to-normal support merging
...
Fixed fatal bug with anchors for mini supports
Make the optimization cleaner in support generatior
Much better widening behaviour
Add an optimizer interface and the NLopt implementation into libslic3r
New optimizer based only on nlopt C interfase
Fix build and tests
2020-08-03 19:05:30 +02:00
tamasmeszaros
8cb115a035
Add possible manipulation of small support diameter.
2020-08-03 19:05:30 +02:00
tamasmeszaros
7c655b5d7e
Fix junction made below ground level.
2020-08-03 19:05:30 +02:00
tamasmeszaros
1eec6c473c
Rename EigenMesh3D to IndexedMesh and SupportConfig to SupportTreeConfig
2020-08-03 19:05:30 +02:00
tamasmeszaros
645fbed88b
Make compile time support tree conf params constexpr
2020-08-03 19:05:30 +02:00
tamasmeszaros
f19b3a2344
Id-s put in a base class for support tree primitives
2020-08-03 19:05:30 +02:00
tamasmeszaros
301a168b89
Fix bugs and non working tests
...
Fix failing tests
Try to fix build on windows
Try to fix failng tests on Mac
2020-08-03 19:05:30 +02:00
tamasmeszaros
184f64f828
Separate support tree routing and meshing, remove Common.hpp/.cpp .
...
* Remove Common.hpp and Common.cpp, move things into their respective modules in sla.
2020-08-03 19:05:30 +02:00
tamasmeszaros
2ff04e6f68
Bugfixes for support generator
...
* Fix support heads floating in air
* Fix failing tests for the bridge mesh intersection
* Fix failing assertions
WIP refactoring support tree gen, as its a mess.
2020-08-03 19:05:30 +02:00
tamasmeszaros
ed460a3e7e
Remove the headless
step of support support tree gen
2020-08-03 19:05:30 +02:00
tamasmeszaros
7b6565abeb
Improvements on mini pillars
2020-08-03 19:05:30 +02:00
tamasmeszaros
67b61c23f7
Remove the discard region for bottom points removal.
...
This was a workaround for small supports not to end up in the middle of the gap between the pad and the object. The issue needs to be solved at the support generation.
2020-08-03 19:05:30 +02:00
tamasmeszaros
0622322146
Create smaller supports in problematic areas with established strategies
...
Completely remove the concept of CompactBridge.
Replace it with Heads having the same back radius as front radius.
Try to apply the same rules for mini supports as in the route_to_model step.
Increased accuracy of bridge_mesh_intersect shot from support points
Refining mini support integration
2020-08-03 19:05:30 +02:00
tamasmeszaros
38239f09e3
Fix remove_bottom_points function
2020-08-03 19:03:02 +02:00
David Kocik
b3f8ae5ca7
Notifications & warning dialog
...
notifications
dialog with warnings produced by slicing is shown before exporting
2020-08-03 15:49:25 +02:00
enricoturri1966
0840b2328a
Tech ENABLE_GCODE_VIEWER_AS_STATE set as default
2020-08-03 15:00:19 +02:00
enricoturri1966
0eb6ba96d6
Fixed conflicts after merge with master
2020-08-03 14:17:40 +02:00
enricoturri1966
5249b3e018
ENABLE_GCODE_VIEWER -> Estimated print time statistics moved from PrintStatistics to GCodeProcessor
2020-08-03 13:57:10 +02:00
enricoturri1966
757572b760
Tech ENABLE_LAYOUT_NO_RESTART set as default
2020-08-03 11:08:17 +02:00
enricoturri1966
1532920d81
GCodeProcessor -> Extended import of config data from gcode saved by PrusaSlicer
2020-08-03 08:46:32 +02:00
enricoturri1966
534e8bb909
ENABLE_GCODE_VIEWER -> Export to gcode layer z and layer height at each layer change
2020-07-30 13:49:57 +02:00
enricoturri1966
0348986bda
Follow-up of 9d4344a78c
-> ensure printbed always rendered as custom in gcode preview mode
2020-07-29 14:20:01 +02:00
enricoturri1966
9d4344a78c
GCodeProcessor/GCodeViewer -> Extract bed shape from gcode files generated by PrusaSlicer
2020-07-29 12:47:42 +02:00
enricoturri1966
16e282110d
GCodeProcessor -> Load config data from gcode files generated by PrusaSlicer
2020-07-29 11:13:48 +02:00
enricoturri1966
11cf9a87f1
GCodeProcessor -> Calculate mm3 per mm on the fly
2020-07-29 10:04:10 +02:00
YuSanka
3c3e463f50
Merge remote-tracking branch 'origin/master' into ys_ph_printers
2020-07-28 14:14:16 +02:00
YuSanka
68ae95509f
Improved InfoMsg for a delete preset:
...
* Now we show a list of printers name with selected preset
+ Added a edit_button for the editing of the physical printer fro the Settings Tab
+ Show whole list of the loaded presets with "Print host upload"
2020-07-28 12:43:26 +02:00
enricoturri1966
d9228ee82c
GCodeProcessor -> Human readable extrusion roles in gcode
2020-07-28 09:48:55 +02:00
enricoturri1966
14366800e2
GCodeProcessor -> Added parsing of 3d part generated gcodes
2020-07-27 15:45:29 +02:00
enricoturri1966
48ae8dc9a2
Modal estimated printing time dialog
...
Fixed conflicts after merge with master
2020-07-27 14:53:17 +02:00
Lukas Matena
248fba82a4
TriangleSelector: 3MF loading and saving
2020-07-24 17:47:16 +02:00
Lukas Matena
7ddb64783b
TriangleSelector: edge limit is derived from cursor size
2020-07-24 17:47:16 +02:00
Lukas Matena
74a1aeff8e
TriangleSelector: bugfix - backend did not correctly account for mirrorring
2020-07-24 17:47:16 +02:00
Lukas Matena
5a1d9aee15
TriangleSelector: Fix of a macOS crash
...
Calling reset() from constructor relied on uninitialized variable
2020-07-24 17:47:16 +02:00
Lukas Matena
afb5d929c4
TriangleSelector: Schedule restarting background process after edit
2020-07-24 17:47:16 +02:00
Lukas Matena
3b91d11ddf
TriangleSelector: backend is aware of divided triangles
2020-07-24 17:47:16 +02:00
Lukas Matena
0756a7e4b3
TriangleSelector: 'Select by angle' and 'reset selection' functions fixed
2020-07-24 17:47:16 +02:00
Lukas Matena
6baff45759
TriangleSelector: Separated frontend/backend, support of multiple volumes, etc.
2020-07-24 17:47:16 +02:00
Lukas Matena
953d1417a0
TriangleSelector: draft of interface
2020-07-24 17:47:16 +02:00
YuSanka
a4c12b90f1
PhysicalPrinterCollection: Use select_preset() instead of select_preset_by_name()
...
+ changed signature for select_preset()
2020-07-23 12:17:18 +02:00
YuSanka
631b15b7d3
Merge remote-tracking branch 'origin/master' into ys_ph_printers
2020-07-22 15:53:31 +02:00
enricoturri1966
8e679d8b75
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-07-22 10:37:35 +02:00
enricoturri1966
8f90fe1609
Code cleanup and small refactoring
2020-07-22 10:37:25 +02:00
YuSanka
6d28d68e4a
PhysicalPrinter : Implemented synchronizations from user printer profiles with "Print Host upload" information to the new physical printers
2020-07-22 09:24:12 +02:00
rongith
435355adfe
Temporary ironing icon to avoid crashes on GTK
...
Ironing type and spacing can be set per-object
2020-07-22 09:11:48 +02:00
enricoturri1966
6bbc7c048f
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-07-21 16:01:27 +02:00
bubnikv
f7ceffb46e
Fixed back-end warning infrastructure: The Print / PrintObject
...
should have been derived from ObjectBase, not from ObjectID.
2020-07-21 15:33:36 +02:00
enricoturri1966
5aadfe3d1c
Fixed conflicts after merge with master
2020-07-21 09:48:41 +02:00
YuSanka
f138978fe7
Merge remote-tracking branch 'origin/master' into ys_ph_printers
2020-07-21 09:47:29 +02:00
enricoturri1966
dc59e86d2c
ENABLE_GCODE_VIEWER -> Partial refactoring in preparation for removal of old time estimator
2020-07-21 09:34:54 +02:00
enricoturri1966
b587289c14
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-07-21 09:09:09 +02:00
enricoturri1966
6e80065240
Added well-known metadata to 3mf export
2020-07-21 09:08:48 +02:00
Lukas Matena
d910f7934b
Empty layer check fix
...
The test gave false positive in case there were supposed to be both object and support extrusions on the first layer
2020-07-21 08:43:23 +02:00
YuSanka
3d990a9189
First try to convert a user printer profiles to the physical printers
2020-07-20 16:27:39 +02:00
YuSanka
72ec414f1e
PhysicalPrinters improvements:
...
- Added possibility to correct delete presets considering with the physical printers
- Smart switching to the printer preset if physical printer was selected
2020-07-20 14:56:09 +02:00
enricoturri1966
2de442b617
Pull request #4235 - Fix tick/untick ironing feature in preview by rongith
2020-07-20 13:31:39 +02:00
Paul Arden
e275197518
Add G10 temperature G-code support for the RepRapFirmware flavour.
2020-07-20 20:57:37 +10:00
enricoturri1966
51f0fd8912
GCodeViewer -> Added visualization of percentage in estimated printing time dialog
2020-07-20 09:45:49 +02:00
YuSanka
5eac36a310
Update for PresetComboBoxes
...
All "Printer-PresetName" pairs are like a separated items now
+ some code refactoring for PresetComboBoxes::update()
2020-07-17 14:32:38 +02:00
enricoturri1966
b03ae392c5
GCodeViewer -> Added estimated printing times for extrusion roles
2020-07-17 10:50:16 +02:00
enricoturri1966
5d845c7a25
Fixed conflicts after merge with master
2020-07-17 08:58:12 +02:00
enricoturri1966
f7164db68e
GCodeViewer -> Added estimated printing times for move types
2020-07-17 08:27:23 +02:00
Lukas Matena
f326352ceb
Empty layers check converted to a warning (except for the first layer)
2020-07-16 15:42:33 +02:00
enricoturri1966
602a9bc75f
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_gcode_viewer
2020-07-16 11:09:46 +02:00
enricoturri1966
3a88e69896
ENABLE_GCODE_VIEWER -> Integration of time estimator into GCodeProcessor
2020-07-16 11:09:21 +02:00
bubnikv
ba0146746d
Fix of previous commit.
2020-07-15 18:13:11 +02:00
bubnikv
f64da8e6cc
Update of back-end warnings:
...
Back-end warnings contain two new members: "current" and "message_id".
A warning is set to "not current" if its milestone is invalidated.
2020-07-15 18:03:39 +02:00
YuSanka
c5197f3350
PhysicalPrinterDialog is completed
2020-07-14 15:34:08 +02:00
Vojtech Bubnik
746ece4c40
Support for collecting warnings from the background processing.
...
Multiple warnigns may be collected per Print / PrintObject milestone
and a status update is sent to the UI immediately after a warning
is issued.
2020-07-14 11:52:34 +02:00
enricoturri1966
f5215cac44
Attempt to fix crash on Mac when rotating an object while layer editing is active
2020-07-13 13:16:18 +02:00
enricoturri1966
73b885fc37
GCodeViewer -> Added imgui dialog for estimated printing times
2020-07-08 13:33:50 +02:00
YuSanka
0b88e86634
PhysicalPrinter improvements:
...
* implemented PresetForPrinter class
2020-06-30 14:12:47 +02:00
enricoturri1966
69de5c8c9f
GCodeViewer -> Pass vertex normal to shaders for toolpaths
2020-06-29 14:00:08 +02:00
YuSanka
6d4a0d91fc
Fixed typo in PresetComboBox.hpp and added missed include in libslic3r.h
2020-06-26 16:58:53 +02:00
YuSanka
d96b5f3606
PhysicalPrinter : Next improvements:
...
* Create full printer name as a PrinterName + RelatedPresetName
* Added printer model to the PhysicalPrinter.config => Enable to select just between presets with same printer model
* When physical printer is selected and create new preset ask if should we use this preset for selected ph_printer or just to switch for it
2020-06-26 10:00:03 +02:00
YuSanka
1a2926050f
PhysicalPrinter. PhysicalPrinterDialog improvements
2020-06-25 12:58:59 +02:00
YuSanka
8ac839f427
Physical printers: Delete selected printer
...
+ Added context menu for the cog-button near the printer presets
2020-06-24 12:28:00 +02:00
YuSanka
02624689ce
Physical Printers.
...
- save/load printers
- consistency between selection on Tab and Plater
2020-06-24 08:50:01 +02:00
enricoturri1966
eb215fe994
ENABLE_GCODE_VIEWER_AS_STATE -> Removed tabs from gcode viewer state
2020-06-19 15:32:44 +02:00
enricoturri1966
5c7b0948bc
Fixed conflict after merge with master
2020-06-19 11:49:59 +02:00
enricoturri1966
f6b5c64642
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_layout
2020-06-17 09:34:56 +02:00
YuSanka
19c4f32604
Preset and PresetBundle are moved to the _libslic3r_ folder
2020-06-16 17:03:06 +02:00
Vojtech Bubnik
81b809f2a1
Fixed broken compilation of Perl bindings.
2020-06-16 14:39:08 +02:00
Vojtech Bubnik
b101a8e266
Fixes of the offset curves from Voronoi diagram.
...
The offset curve extractor is already quite usable,
though singular cases are still not covered yet
when the offset curve intersects or nearly intersects
a Voronoi vertex.
Removal of the PRINTF_ZU "%zu" Visual Studio printf compatibility macro.
Fixes of a contours self intersection test for collinear segments.
SVG exporter now exports white background, so that the GNOME Eye viewer is usable.
2020-06-16 13:15:48 +02:00
enricoturri1966
3982d8b51e
Fixed conflict after merge with master
2020-06-15 16:55:14 +02:00
enricoturri1966
dcf68aefd7
Enable built-in DPI changed event handler when building against wxWidgets 3.1.3
2020-06-15 16:20:34 +02:00
enricoturri1966
ab60499298
Fixed conflicts after merge with master
2020-06-12 10:35:18 +02:00
enricoturri1966
aa14b42638
GCodeProcessor -> Added processing of gcode lines G0
2020-06-12 09:01:20 +02:00
enricoturri1966
42a8a4aa77
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_layout
2020-06-12 07:32:06 +02:00
Vojtech Bubnik
1c95ceaeaa
Reworked algorithm for Voronoi Offset curve extraction.
...
Now the algorithm is very different from the OpenVoronoi implementation
and hopefully it is now correct (save numerical issues, which will be
a big PITA).
2020-06-11 16:11:02 +02:00