enricoturri1966
a0fc398141
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-26 13:57:57 +01:00
enricoturri1966
a897dd0504
Disabled tech ENABLE_GCODE_VIEWER_STATISTICS
2021-01-26 13:56:32 +01:00
enricoturri1966
9304defe7c
Tech ENABLE_UNSIGNED_SHORT_INDEX_BUFFER merged into tech ENABLE_SPLITTED_VERTEX_BUFFER
2021-01-26 13:32:27 +01:00
enricoturri1966
3533473256
Tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING merge into tech ENABLE_SPLITTED_VERTEX_BUFFER
2021-01-26 12:21:50 +01:00
tamasmeszaros
85a7a3d5c5
Use prusaslicer_add_cmake_project on each cmake deps project
...
replace avrdude conf generation from C to CMake code
2021-01-26 10:17:51 +01:00
enricoturri1966
9ede830f66
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-26 10:10:23 +01:00
Vojtech Bubnik
500c667d7a
Extended miniz with https://github.com/richgel999/miniz/pull/147
...
to support writing a file from a callback without knowing the file
size up front. See comments in src/miniz/README-Prusa.txt for potential
pitfalls.
2021-01-26 09:29:34 +01:00
Vojtech Bubnik
4620402ab4
WIP: Initial Fuzzy Skin implementaiton #2010
...
Based on pull request Experimental fuzzy skin mode #4611 by @etet100
and on CuraEngine implementation of perimeter fuzzyfication
void FffPolygonGenerator::processFuzzyWalls(SliceMeshStorage& mesh)
2021-01-26 09:29:34 +01:00
YuSanka
79b7ccbb79
OSX specific, related to the wxWidgets 3.1.4: Fixed wrong UI-scaling
...
(wxWidgets 3.1.4 can binding of wxEVT_DPI_CHANGED now, so it was called msw_rescale() for most of the controls redundantly)
+ Fixed update of the DoubleSlider after changing of the system color
2021-01-22 21:44:15 +01:00
Vojtech Bubnik
eef800b5c4
FIXME on ExPolygon::overlaps(), which should be commutative.
2021-01-22 15:32:45 +01:00
enricoturri1966
30f43974fb
ENABLE_GCODE_VIEWER_STATISTICS - GCodeViewer statistic dialog modified to not require extra frames render
2021-01-22 12:32:40 +01:00
enricoturri1966
97c31b2a34
ENABLE_SPLITTED_VERTEX_BUFFER - Re-enable tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING after fixing it
2021-01-21 16:33:35 +01:00
enricoturri1966
0f8e7f3e8b
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-21 09:44:27 +01:00
enricoturri1966
56b378d766
Fixed visualization of point toolpaths, broken with daa0bbdb0c
2021-01-21 09:44:02 +01:00
YuSanka
59017a7dae
wxBitmapComboBox under OSX and wxComboBox under other platforms is used on Manipulation panel for coordinate space choice now.
...
+ Fix of warning on wxBitmap.SetWidth(): deleted meaningless from wxWidgets 3.0 code
2021-01-20 17:34:54 +01:00
enricoturri1966
5161643fc6
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-20 13:48:09 +01:00
enricoturri1966
ee40ab421a
ENABLE_SPLITTED_VERTEX_BUFFER - Use unsigned short indices buffers to render toolpaths and temporary disable tech ENABLE_TOOLPATHS_ALTERNATE_SMOOTHING which is causing artifacts
2021-01-20 13:47:48 +01:00
Vojtech Bubnik
6d7d482ca1
Fix of Extrusion Width Percentge #4631
...
Fixed extrusion width validation logic in case the extrusion width
was specified wrt. layer height.
2021-01-20 11:03:52 +01:00
Vojtech Bubnik
979dfe50b8
OSX specific, needed after update of Xcode to 12.2 with OSX SDK 11.1,
...
where we have issues with false positives of address sanitizer
https://github.com/google/sanitizers/wiki/AddressSanitizerContainerOverflow#false-positives
Setting ASAN_OPTIONS=detect_container_overflow=0 inside Info.plist
2021-01-20 09:21:16 +01:00
Vojtech Bubnik
c506c15ed4
Manual merge of 4e586b8edabde1146c4013ca2437469a448315e2 from upsteam Slic3r,
...
fixing "percent first layer speed was not applied over autospeed." GH upstream Slic3r #2945
our GH issue First Layer Speed Percentage not applying (#5829 )
2021-01-19 16:50:24 +01:00
Vojtech Bubnik
b7c8d6db9f
Bumped up minimum required OSX version from 10.9 to 10.10 due to
...
an update of wxWidgets, which do not compile cleanly on 10.9 without
further patching.
2021-01-19 15:59:29 +01:00
Vojtech Bubnik
6d49bc1978
Follow-up to 2bc6679a62
...
Set the printer_technology field.
2021-01-19 15:35:27 +01:00
Vojtech Bubnik
2bc6679a62
Partial revert of 1bffc2b99b
...
(deriving the printer technology from the merged configs).
2021-01-19 15:18:03 +01:00
tamasmeszaros
56e7d83513
Implement exception rethrow for ui jobs
2021-01-19 15:01:20 +01:00
Lukas Matena
a5dc3c4b66
Bugfix: CLI slicer should slice in FDM mode when no printer_technology is provided.
...
This was broken between 2.2.0 and 2.3.0 (1bffc2b
) and changed the CLI behaviour.
Also related to 5029.
2021-01-19 10:29:35 +01:00
Vojtech Bubnik
5294a48ee8
Fix of prusa 2.3.0 crash with 0.25 nozzle #5825
...
Importing a config bundle as a config file was broken for
multi material FDM printers, where a different filament was active
for each extruder.
2021-01-19 09:58:14 +01:00
YuSanka
1efa129b67
Fix of #5619 - Copying Item with Printable Property
2021-01-18 15:19:02 +01:00
enricoturri1966
56d26ad491
ENABLE_SPLITTED_VERTEX_BUFFER - slightly faster indices buffers generation in GCodeViewer::load_toolpaths()
2021-01-18 13:55:45 +01:00
enricoturri1966
3a0aabb924
ENABLE_SPLITTED_VERTEX_BUFFER - small refactoring in GCodeViewer::load_toolpaths()
2021-01-18 11:37:23 +01:00
enricoturri1966
59cabc9712
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-18 09:59:26 +01:00
enricoturri1966
8f1bc02287
ENABLE_SPLITTED_VERTEX_BUFFER - fixed cracks in toolpaths when splitting vertex and index buffers
2021-01-18 09:59:05 +01:00
Vojtech Bubnik
9a2310ae98
Fix of [prusa3d/PrusaSlicer] Remove unnecessary null pointer checks ( #5813 )
...
Don't use
if (ptr)
delete ptr;
call
delete ptr;
directly, it contains the test for null ptr.
2021-01-18 09:33:19 +01:00
Vojtech Bubnik
59911e7c35
Slight improvement in Hilbert infill by using constexpr
2021-01-15 09:34:50 +01:00
Vojtech Bubnik
63e666b8d6
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2021-01-14 12:51:38 +01:00
Vojtech Bubnik
48877614e2
Fix of --scale-to-fit not accepting any input as valid ( #5772 )
...
Fixed parsing of Point3, fortunately Point3 was used at just a single
command line parameter, thus this was not a big deal.
2021-01-14 12:51:28 +01:00
enricoturri1966
f27032f603
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-14 11:38:22 +01:00
enricoturri1966
8bdfb6bbce
ENABLE_SPLITTED_VERTEX_BUFFER - fixed bugs in export of toolpaths to obj files and in index buffer splitting
2021-01-14 11:38:03 +01:00
YuSanka
af6ef2cb8a
Merge remote-tracking branch 'origin/master' into dev
2021-01-13 14:18:55 +01:00
enricoturri1966
bda43e4482
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-13 10:46:11 +01:00
enricoturri1966
67e144f329
ENABLE_SPLITTED_VERTEX_BUFFER - fixed export of toolpaths to obj files
2021-01-13 10:45:52 +01:00
Vojtech Bubnik
293f85b6cf
Fix of Invoking prusa-slicer from $PATH environment variable crashes #5542
...
Also it likely fixes Crashes when started from symbolic link #5751
2021-01-13 09:22:13 +01:00
YuSanka
0369caa9e1
Fix of #5163 and #5505 - Vertical cutting of the preset comboboxes on a sidebar
2021-01-12 14:54:58 +01:00
enricoturri1966
dc781535b2
Code cleanup
2021-01-12 14:34:52 +01:00
enricoturri1966
e443fe49ad
ENABLE_SPLITTED_VERTEX_BUFFER - fixed visualization of last segment for paths whose vertex buffer has been splitted
2021-01-12 14:03:58 +01:00
enricoturri1966
fb7dada01d
1st installment of tech ENABLE_SPLITTED_VERTEX_BUFFER - split vertex buffer when greater than a fixed max size
2021-01-12 09:03:35 +01:00
Sebastian Hammerl
f6f1a3265b
Added conversion to c_str
2021-01-12 08:54:39 +01:00
enricoturri1966
250adabd5c
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-12 08:10:17 +01:00
Vojtech Bubnik
7d751753bc
Replaced __linux macro with __linux__
2021-01-11 13:31:30 +01:00
YuSanka
7a1574a853
Fix of #5720 - SL1 Printer Settings->Notes is not updated when switching tab
2021-01-11 13:11:35 +01:00
Vojtech Bubnik
5a1a41096b
Fix of a crash when slicing an object producing no layers and
...
elphant foot compensation is enabled.
2021-01-11 12:20:50 +01:00
Vojtech Bubnik
d46a756b98
Finally fixing the single instance for AppImage
2021-01-11 11:41:22 +01:00
Vojtech Bubnik
a900b7767b
Fix of previous commit
2021-01-11 11:29:27 +01:00
Vojtech Bubnik
7780221683
Fixed "Single instance" locking issue on Linux with AppImage,
...
where the PrusaSlicer binary is mounted at a different mount point
at each AppImage execution.
Fixes Lock files in the local configuration directory are not deleted (#5733 )
2021-01-11 11:14:59 +01:00
Raphael Sobik
2db704917a
Use correct M204 command for acceleration
...
M204 S is not supported for RepRapFrimware (https://duet3d.dozuki.com/Wiki/Gcode#Section_M204_Set_printing_and_travel_accelerations ).
2021-01-11 10:50:18 +01:00
Boleslaw Ciesielski
ecda157c51
Fixed build regression in commit a5882a1a1c
on some Linux platforms. We need to link with GTK libs after all.
2021-01-10 22:39:59 -08:00
Mathias Rasmussen
7db371f4df
remove "Some text"
2021-01-09 14:31:21 +01:00
tamasmeszaros
d19a7fcfad
Increase tolerance for objects being outside print bed.
2021-01-08 10:14:24 +01:00
enricoturri1966
2dfa91eaf9
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-08 08:48:10 +01:00
enricoturri1966
012a76e126
Removed obsolete method declaration in GLCanvas3D
2021-01-08 08:47:33 +01:00
enricoturri1966
2e6a0f1ae3
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-08 08:18:27 +01:00
Vojtech Bubnik
2b02747ec5
On OSX, we use boost::process::spawn() to launch new instances of PrusaSlicer from another PrusaSlicer.
...
boost::process::spawn() sets SIGCHLD to SIGIGN for the child process, thus if a child PrusaSlicer spawns another
subprocess and the subrocess dies, the child PrusaSlicer will not receive information on end of subprocess
(posix waitpid() call will always fail).
https://jmmv.dev/2008/10/boostprocess-and-sigchld.html
The child instance of PrusaSlicer has to reset SIGCHLD to its default, so that posix waitpid() and similar continue to work.
Fixes #5507
2021-01-07 19:14:48 +01:00
Vojtech Bubnik
71808dc006
boost::process::spawn() sets SIGINT to SIGIGN, which collides with boost::process waiting for a child to finish!
...
https://jmmv.dev/2008/10/boostprocess-and-sigchld.html
Thus reset the SIGINT to its default, so that posix waitpid() and similar continue to work.
Fixes Crash on Eject in Second Instance on macOS #5507
2021-01-07 17:38:56 +01:00
Vojtech Bubnik
2ad4447035
Fix of Ejecting of device has failed on Ubuntu Linux #3975
...
Eject failed due to superfluous escaping of spaces in path to the SD card
mount point.
2021-01-07 14:17:09 +01:00
Vojtech Bubnik
4988b93b8d
Merge remote-tracking branch 'remotes/origin/master' into vb_osx_eject
2021-01-07 14:12:40 +01:00
Vojtech Bubnik
8c597e9533
Merge remote-tracking branch 'remotes/origin/dk_refresh' into vb_osx_eject
2021-01-07 14:00:21 +01:00
tamasmeszaros
2505c0a82d
Fix for incorrect text fitting on gtk comboboxes.
...
fixes #4584
2021-01-07 13:38:29 +01:00
David Kocik
df59f9497a
request frame with delay when new notification pushed
2021-01-07 13:33:05 +01:00
tamasmeszaros
a5882a1a1c
success with text ellipsize for combobox
2021-01-07 13:24:26 +01:00
David Kocik
c61a6289c5
update notification before erasing finished ones
2021-01-07 13:16:23 +01:00
Vojtech Bubnik
c227e15794
Fixed compilation on OSX
2021-01-07 13:13:35 +01:00
David Kocik
f43b34fb57
wxWakeUpIdle when render timer ends to ensure idle function spawns and triggers rendering
2021-01-07 12:54:53 +01:00
YuSanka
8e7958da12
Fix of #5698 - When editing presets, list items are always green even if values have changed compared to preset or defaults
2021-01-07 12:26:16 +01:00
Vojtech Bubnik
546fbe1e8e
Fix of previous commit for OSX
2021-01-07 12:19:41 +01:00
Vojtech Bubnik
961abd75e8
Fix of previopus commut
2021-01-07 12:09:47 +01:00
Vojtech Bubnik
18cf1fdb43
Fixing the SD card eject issue on OSX by pushing the call to
...
"diskutil eject" to a worker thread.
Hopefully fixes Ejecting an SD card is slow and locks UI #4844
2021-01-07 12:02:44 +01:00
enricoturri1966
f5c3ca8eea
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-07 11:13:26 +01:00
enricoturri1966
77f6606771
Another refactoring in GCodeViewer::load_toolpaths()
2021-01-07 11:13:07 +01:00
enricoturri1966
83f60a9dd1
Small refactoring in GCodeViewer::load_toolpaths()
2021-01-07 10:11:50 +01:00
enricoturri1966
ebed29708d
Refactoring of GCodeViewer initialization
2021-01-07 09:57:37 +01:00
YuSanka
efd3002ea9
Fix of #5568 - Unselecting more than 10 copies stops at copy 10
...
But really bug was: incorrectly interrupted DnD.
2021-01-07 09:56:43 +01:00
enricoturri1966
27bd79e409
Fixed merging error after merge with master
2021-01-07 09:06:15 +01:00
YuSanka
3070e66aae
Fixed black rects for extruder colors, when we load 3mf project with MM-printer profile and extruder colors is set to the filament colors
...
+ Fixed a bug with updating colors in extruder editors in ObjectList, when we use filaments colors for extruders and some filament profile is switched
2021-01-07 08:52:45 +01:00
enricoturri1966
676540279d
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2021-01-07 08:24:29 +01:00
Vojtech Bubnik
daa0bbdb0c
Fix of slow update when dragging the vertical slider in G-code viewer
...
with volumetric flow color mapping enabled.
Fixes "Volumetric flow rate computes very slowly #5572 "
2021-01-06 15:32:31 +01:00
YuSanka
939d08af19
Fix of #4532 - "Send G-Code to printer host" dialog box blanks out text on Linux
2021-01-06 12:24:00 +01:00
Vojtech Bubnik
67256d6bb0
Added a FIXME comment for
...
Sequential tool path ordering of multiple parts within the same object, aka. perimeter tracking (#5511 )
2021-01-06 12:19:08 +01:00
Vojtech Bubnik
93a5906a18
Fixed numerical issue with the new algorithm to connect infill lines
...
with perimeters:
1) Increased accuracy of the contour length parametrization from
float to double, as double should capture the difference of
32bit coord_t with full accuracy (or at least very close).
2) The algorithm to insert the T-joint points into the infill perimeter
contour was improved to avoid inserting duplicate points.
2021-01-06 12:18:05 +01:00
Vojtech Bubnik
3c9f3d2b66
Fixing the infill order for concentric infill to outside-in.
...
Relies to:
Concentric Fill Start Point - New Feature Request #4948
Feature Request: Archimedean Chords - Option to define direction of travel (Inside-Out or Outside-In) #5214
2021-01-06 11:05:32 +01:00
Lukas Matena
e733565031
Fix of #5632 (painter gizmos not working correctly with scaled objects)
...
This was broken since 8bcdbb7
.
2021-01-05 17:06:05 +01:00
YuSanka
48c7673cc6
Fix of #5584 - Information text on startup logo
2021-01-05 14:26:10 +01:00
Vojtěch Bubník
57d0f4b4f6
Merge pull request #5544 from hzeller/fix-assignment-of-charliteral-to-writable-charptr
...
Fix assignment of string literals to char*.
2021-01-05 13:11:29 +01:00
Vojtech Bubnik
fb29325b14
Fix of G-code Viewer not loading .gco files #5536
...
".gcode", ".gco", ".g" and ".ngc" were considered to be G-code file
extensions by the G-code import / export file dialogs, but not by
various other functions. Now the G-code extension is tested by
a single function is_gcode_file(string).
2021-01-05 12:26:11 +01:00
enricoturri1966
b93c2aea44
#5690 - Fixed thumbnail generation when a gizmo is active
2021-01-05 11:58:48 +01:00
tamasmeszaros
a629401916
Fix for "bed fill" discarding selected instance transformation.
...
fixes #5621
2021-01-04 20:33:17 +01:00
YuSanka
f119b80341
Fix of #5672 - Dubious grammar when closing Physical Printer dialog
2021-01-04 19:03:34 +01:00
YuSanka
c3f88db392
Fix of #5638
2021-01-04 18:05:20 +01:00
YuSanka
5845957c7d
Fix of second part of #5531
...
From the Win 2004 preset combobox lose a focus after change the preset selection and that is why the up/down arrow doesn't work properly.
So, set the focus to the combobox explicitly.
2021-01-04 16:51:29 +01:00
Vojtech Bubnik
1076e077ce
Fix of Adaptive cubic infill weird behavior #5633
...
Enabling reordering of infill paths for Support Cubic and Adaptive Cubic
infill types.
2021-01-04 15:42:23 +01:00
Lukas Matena
30c8592b10
Do not use ironing extrusions for autospeed calculations ( #5082 )
2021-01-04 14:21:24 +01:00
enricoturri1966
4d3cb19423
5677 - GCodeProcessor accepts gcode line T-1 as valid for RepRapFirmware and RepRapSprinter
2021-01-04 14:21:24 +01:00
enricoturri1966
016042db10
Disabled tech ENABLE_RENDER_STATISTICS
2021-01-04 14:21:24 +01:00
Lukas Matena
837070a246
Hotfix of a crash with raft and one-layer object ( #5652 )
...
The problem is that PrintObject support generator is only run when m_layers.size() > 1, so one-layer object will skip it.
It apparently never worked, after recent refactoring (probably 8bfc986
) it started to crash in GCode generator.
This commit fixes the crash, but not the problem. The raft is still not generated (like in all versions since 2.0.0 at least).
2021-01-04 14:21:24 +01:00
Tuomas Kuosmanen
7a41ab20ed
Changed wording in one log message
2021-01-04 14:21:24 +01:00
Lukas Matena
6cf47f3e61
Use monospace font in placeholder parser error messages (Linux fix)
...
Previous implementation did not use monospace font on Linux. According to a note
from @wavexx in ba7f39a
: "wxSYS_ANSI_FIXED_FONT use the same as DEFAULT in wxGtk".
This commit uses the same workaround by actually loading the font from GUI_App.
2021-01-04 14:21:24 +01:00
Lukas Matena
1d25630508
Fix of #5606 (Force invalidation when object settings are deleted)
2021-01-04 14:21:24 +01:00
Lukas Matena
6c2ce4b6b6
Escape special xml characters when writing metadata into the model file
...
This should fix #5577
2021-01-04 14:21:24 +01:00
Vojtech Bubnik
2d428198b1
Fix of 2.3 rc1 can't load its own 3mf files (if they contain custom gcode) #5550
...
The issue was handling of the special "default_filament_profile" vector,
which is not being normalized in length to the number of extruders,
as this vector is being shown to the user at the Printer dependencies page,
and we don't want to present empty fields there, if the default filament
profile was not defined in the system preset.
2021-01-04 11:13:44 +01:00
Vojtech Bubnik
b002c1485d
Fix of PrusaSlicer hangs on Linux when run with non standard task affinity #5661
2021-01-04 09:03:49 +01:00
YuSanka
c747502db9
Fix of #5517 "Unsupported Selection" error when copy pasting objects with modifiers...
2020-12-30 12:44:07 +01:00
YuSanka
6effa30322
Move text color selection from ButtonsDescription to Preferences dialog (related to #5489 )
2020-12-30 12:04:59 +01:00
YuSanka
0331bcefd9
ObjectList: Smart update of the min height in respect to the items count.
...
Min 7 items and max 15 items
2020-12-30 11:00:02 +01:00
YuSanka
40fb39f5e1
Change the y_step for sidebar slider to fix strange layout of the sidebar
2020-12-29 19:04:38 +01:00
YuSanka
e193a0e921
localization: Fixed one phrase
2020-12-22 17:24:29 +01:00
Pascal de Bruijn
75381af263
PrusaGcodeviewer.desktop icon ( #5555 )
...
Linux: update PrusaGcodeviewer.desktop icon
2020-12-22 16:50:34 +01:00
YuSanka
034ca8ef57
Fixed a checking of the description lines existence before setting new value for them
2020-12-22 16:23:53 +01:00
Lukáš Hejl
81878a6f79
Fix of #5537 - GUI_App::post_init could be in some cases called before GUI_App::init_openg when GCode viewer is used.
...
The solution adds a status flag to GUI_App::init_openg and ensures that GUI_App::post_init isn't called before initialization in GUI_App::init_openg is done.
2020-12-22 12:28:00 +01:00
David Kocik
99f5dfbde7
Added error-checking for child.wait() call during removable drive ejection (to prevent #5507 )
...
Mark Ejection as failed if the wait() function fails. It seems that it is not simply possible
to retrieve the exit code of the process in that case (although it usually finishes sucessfully).
2020-12-22 12:18:30 +01:00
YuSanka
6c399052c6
Fixed a crash on copy/paste, when ObjectList has no selection. Related to #5517
2020-12-22 10:42:47 +01:00
YuSanka
738c115ec1
Follow-up to 9d34d350a5
: Missed one more translation for category, when checking selection on the left panel
...
+ Fixed a typo in CS and ES dictionaries
2020-12-21 14:28:50 +01:00
Lukáš Hejl
dc2e7aeb4e
Fixed wrong generation of Adaptive Cubic and Support Cubic infill when infill extrusion width is set in percent.
2020-12-21 14:14:06 +01:00
Lukas Matena
78a3d8b63e
Fixed ASCII folding for non-foldable non-ASCII characters
...
Problem: Add an object, name it using cyrilic, Slice, click Export: the proposed name is mangled. Affects all platforms, 2.2.0 was fine.
Cause: It is mangled during ASCII folding, which was broken with 28c0880
when it was generalized to be used from the fuzzy matcher.
fold_to_ascii(wchar_t c, char *out) relies on narrowing char = wchar_t assignment, the old one used std::back_insert_iterator<std::wstring>.
It is thus unable to leave a character alone even when it should (it should, right?).
Solution:
1. Typed the fold_to_ascii function so it works on wchar_t only, which should mimic the old behaviour.
2. Changed the respective call in fts_fuzzy_match.h. That function also works with wide char C-strings.
Cleanup:
1. Removed the unused fold_utf8_to_ascii(const char *src) overload to avoid code duplication.
2. Untemplated the fold_to_ascii(wchar_t c, std::back_insert_iterator<std::wstring>& out) function, it was never called with a different type.
3. The function is now static in ASCIIFolding.cpp, nobody else needs to know.
2020-12-21 10:31:37 +01:00
Lukas Matena
1f5ac7d2f7
Fix of a crash on startup when creating physical printer profiles from 2.2 configs ( #5513 , #5074 )
...
The issue is that opening the wxMessageDialog in GUI_App::check_printer_presets fires wxEVT_IDLE event (on Linux at least).
At that point it is already bound to our lambda which will in turn call post_init prematurely.
The solution is to move the Bind at the very end of the initialization. The post_init that it calls assumes that init has been finished anyway.
2020-12-21 10:27:35 +01:00
Lukáš Hejl
181642b85b
Fix of #5528 - Request re-slicing when bottom_solid_layers changes and spiral_vase is enabled.
2020-12-21 09:15:33 +01:00
Henner Zeller
79e041b961
Fix assignment of string literals to char*.
...
Fix some char *foo = "string literal" assignments that
really should be assigned to const char*.
(they also happen to be constexpr, but that only prevents
to assign something later to foo, but does not alter
the char* type).
Signed-off-by: Henner Zeller <h.zeller@acm.org>
2020-12-20 13:40:25 -08:00
David Kocik
593c397b19
Missing init() call at notification render
2020-12-19 09:22:40 +01:00
David Kocik
b5de1456a0
Keyboard shortcut at notification hover - eject sd
2020-12-18 15:48:59 +01:00
Lukas Matena
b0115dca60
Fixed encoding issue in ConfigWizard on Windows ( #5422 )
2020-12-18 15:35:30 +01:00
YuSanka
d49f85572b
Added a missing translation macro
2020-12-18 13:28:24 +01:00
Lukas Matena
1cbe2bd87e
Added a missing translation macro
2020-12-18 13:04:28 +01:00
Lukas Matena
8f3baeb1c9
Fix of #5410 (Ironing untick/tick bug)
...
This is a follow-up of commit b1b7a5a
which fixed several similar bugs
2020-12-18 12:44:24 +01:00
YuSanka
8849aa77dc
Decrease min height for ObjectList (related to #5462 )
2020-12-18 11:31:14 +01:00
YuSanka
240dc8b697
Follow-up to 19b52da260
: Fixed scale for view toolbar on HDPI (GTK3 specific)
2020-12-18 11:27:28 +01:00
enricoturri1966
d791720b5e
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-12-18 09:03:45 +01:00
enricoturri1966
156019d9d0
Fixed color of shells in preview
2020-12-18 09:03:18 +01:00
YuSanka
19b52da260
Fix of #5501 - 3D Editor / Layer View widget DPI regression (Linux GTK3 specific)
2020-12-18 08:40:17 +01:00
Lukas Matena
5bd1a57650
Bumped up version number to 2.3.0-rc1
2020-12-17 18:07:35 +01:00
YuSanka
b22a38d1d1
Fix of "cut off text for filament type" (Related to #5444 )
2020-12-17 16:51:51 +01:00
Lukas Matena
aa69730bc2
Revert recent changes in PresetUpdater error reporting
...
This reverts commits:
57ba953
("PresetUpdater - exceptions reformatted, not throwing an exception")
03028bb
("Improved exception throwing at copy file in preset updater")
2020-12-17 16:08:51 +01:00
Lukas Matena
6e3b4b6fd8
Random seam: optimization and fix of a possible infinite loop
2020-12-17 15:48:25 +01:00
enricoturri1966
ce32d68368
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-12-17 11:41:54 +01:00
enricoturri1966
b8fc1d3173
GCodeViewer - Fixed visualization of time estimates for silent mode
2020-12-17 11:41:41 +01:00
Vojtech Bubnik
ba9a9b4e7a
Fixed buffer overflow in the OBJ parser.
...
Improved error reporting on OBJ parser.
2020-12-17 09:53:21 +01:00
david kocik
b1095adc18
follow up of commit c9da06e44a
2020-12-17 09:51:45 +01:00
Vojtech Bubnik
7df9f3e422
Improvements of OBJ parser robustness.
2020-12-17 09:17:07 +01:00
YuSanka
19b7827511
Fix of #5103 and #4861 - ConfigWizard layout issues
2020-12-16 23:44:40 -08:00
YuSanka
64e68f418b
Follow-up to 3eb63c93e1
:
...
If value for "Extrusion Multiplier" is out of range, and "NO" is selected in warning message dialog, then set previous value instead of max limit value
2020-12-16 20:14:47 +01:00
David Kocik
99747f8f25
Changed requested time of rendering for timed notification to full duration. Commented unused code.
2020-12-16 17:43:51 +01:00
Lukas Matena
20aa8d65bf
Fix through Netfabb notification - remove 'undo' hypertext for now and
...
refuse to fix when a gizmo is opened (because of missing updates)
This is a follow-up of 1249fdb
2020-12-16 17:33:55 +01:00
YuSanka
8b980d4b77
Localization: Updated PrusaSlicer.pot and CZ dictionary
...
+ Fixed some phrases.
2020-12-16 17:29:38 +01:00
Vojtech Bubnik
1dae057f15
Some refactoring of the fade out of notifications:
...
1) Use different wxWidgets call to get current time on Windows vs Unix
for efficiency reasons.
2) Don't call this function multiple times in a single function, it is
both expensive and not correct: One shall work with the same timestamp.
3) Added missing unbind of the new timer.
2020-12-16 16:15:58 +01:00
Vojtech Bubnik
08c4f674f7
Disabled "error" outputs
...
1) they should have been trace and
2) likely they should have been only enabled in debug mode and only
through conditional compilation
2020-12-16 14:40:56 +01:00
David Kocik
3ae40139b3
render timer
2020-12-16 14:15:12 +01:00
David Kocik
0592d15c50
render timer draft
2020-12-16 14:15:12 +01:00
Vojtech Bubnik
4d459f37de
Merge branch 'lm_230beta3_fixes'
2020-12-16 13:51:09 +01:00
Lukáš Hejl
80251e0cf9
Fixed of unintentional disabling of wipe even in cases when avoid crossing perimeters weren't applied due to exceeding the maximum detour length.
2020-12-16 13:17:09 +01:00
YuSanka
3eb63c93e1
Follow-up to f37b9c4d51
:
...
Fix for issues:
Issue 1:
1. Change "Extrusion multiplier" parameter,
2. Save edited preset.
3. Change "Extrusion multiplier" parameter -> preset wasn't marked as "modified"
Issue 2:
1. Change "Extrusion multiplier" parameter with out of range value
2. Push ENTER for the message dialog
3. Answer "Yes"
4. Same message dialog appears again
2020-12-16 13:11:07 +01:00
enricoturri1966
52e0e5b8cc
#5481 - Legend keeps last time estimator mode selected
2020-12-16 12:14:57 +01:00
Vojtech Bubnik
2f71af1ee4
Saving "converted from inches" to 3MF and AMF even if the file source
...
information is empty.
2020-12-16 12:05:29 +01:00
Vojtech Bubnik
8f04d0e0e2
Reverted escaping of ampersand where the escaping was not needed
...
/ lead to errors.
2020-12-16 11:46:27 +01:00
YuSanka
f37b9c4d51
Set limits to the "extrusion_multiplier" value and show warning message, if out of range value was inputted
2020-12-15 21:21:09 +01:00
Vojtech Bubnik
0ad3a63a3b
Merge branch 'master' of https://github.com/Prusa3D/PrusaSlicer
2020-12-15 15:15:46 +01:00
YuSanka
c9da06e44a
Fix for text color for the mode buttons under Linux with GTK2 (related to #5444 )
2020-12-15 16:03:32 +01:00
enricoturri1966
9704eb6ece
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-12-15 15:57:32 +01:00
enricoturri1966
dcd69b4ef8
#5415 - Fixed preview when volumetric extrusion is turned on
2020-12-15 15:57:22 +01:00
Vojtech Bubnik
20f5b7a7cd
When activating the PrusaSlicer main window, focus the Plater 3D view
...
or G-code preview if it is marked as Active.
Fixes 3Dconnexion not work directly after importing stl (focus problem ?) #5141
Keep your fingers crossed that it will not break something else.
2020-12-15 15:14:59 +01:00
YuSanka
8d4d6b6c89
UnsavedChangesDialog: Fixed default text color in respect to the system text color (Related to #5444 )
2020-12-15 14:58:34 +01:00
Vojtech Bubnik
aa8f97fce2
Fix of 3DConnexion 3D SpaceMouse Jumpy Pan moves on Linux #5233
...
Also improved error reporting on Linux about the 3DConnexion device
access issues.
2020-12-15 14:27:07 +01:00
Lukáš Hejl
d59f345fbb
Fix of #5443 - Assigned input file path for ModelVolume also for AMF archives
2020-12-15 14:18:11 +01:00
Lukáš Hejl
e62f014049
Corrected side text for avoid crossing perimeters max detour
2020-12-15 14:03:52 +01:00
YuSanka
62c23313be
Suppress to change "inches" flag after conversion to the inches.
2020-12-15 13:57:30 +01:00
Lukáš Hejl
161fb86c43
Fixed percentages in avoid crossing perimeters max detour
2020-12-15 13:49:35 +01:00
Vojtech Bubnik
a13b35ce92
Support for HiDPI in OpenGL on Linux / GTK3.
...
wxGTK3 HiDPI support seems to emulate what OSX does quite closely,
thus the changes are relatively minimal.
Also fixed an ugly rounding issue when populating the ImGUI font map
with image thumbnails.
Fixes Gtk3 issue on 4k+ screens #4135
Fixes HiDPI screens with Wayland on Fedora 30 cause Plater view to be too small. #3245
2020-12-15 12:14:38 +01:00
YuSanka
43581059ff
Fix of #5450 - Wrong printer preset after loading 3mf project file when having multiple presets for one physical printer
2020-12-15 12:11:20 +01:00
enricoturri1966
82fe571cdc
Give focus to 3D scene when activating any gizmo to allow related imgui dialogs to receive keyboard input
2020-12-15 10:57:16 +01:00
enricoturri1966
3f44f8177d
Disable [Perform cut] button in Cut Gizmo dialog when the value of Z is not valid
2020-12-15 10:44:51 +01:00
YuSanka
8627c35057
Fix of #5472 - UI bug: profile edit controls hidden by scroll bars
2020-12-15 09:38:18 +01:00
enricoturri1966
4911b36bfd
#5470 - Fixed switching camera views with alphanumeric row on a czech keyboard
2020-12-15 09:21:09 +01:00
Lukáš Hejl
0ca337ac7a
Apply avoid crossing perimeters also for supports.
2020-12-15 06:46:44 +01:00
Lukas Matena
acb7d66577
Linux locales detection: reject unexpected formatting
2020-12-14 22:59:11 +01:00
Vojtech Bubnik
b9bdfd26e3
Linux locales detection: A little refactoring
2020-12-14 22:59:02 +01:00
Lukas Matena
1249fdb71d
Remove custom supports/seams after mesh repair
...
The repair can remove some of the triangles, so the custom data would make no sense.
This will hopefully fix #5458
Also, show a notification with a hyperlink to undo just before the repair.
2020-12-14 22:59:02 +01:00
Lukas Matena
5553762d9c
Do not remove custom supports/seams when converting units to imperial
2020-12-14 20:27:19 +01:00
Lukas Matena
a5d363a9f4
Do not emit M1 gcode for firmwares other than Marlin (after MM priming)
...
The M1 gcode is apparently only supported on Marlin, others do not support it or use it for something else
This should fix #5441
2020-12-14 20:27:19 +01:00
David Kocik
159dde511e
Changed condition for showing Open new instance item in dock icon menu (mac). Fix of #5463 .
2020-12-14 19:26:25 +01:00
Vojtěch Bubník
cbb306c86a
Merge pull request #5466 from wavexx/include_atomic
...
Include <atomic> for std::atomic where needed
2020-12-14 18:29:13 +01:00
Vojtech Bubnik
d70d54d4d3
UndoRedo extension::
...
has_undo_snapshot(timestamp) to query whether one can undo to a snapshot
with a specific timestamp. Useful for notifications, that want to Undo
a specific operation, to verify whether such operation is still valid.
2020-12-14 16:22:40 +01:00
Vojtech Bubnik
7b9f2093bb
Configuration layer: Support for vectors of FloatsOrPercents and
...
FloatsOrPercentsNullable, to support further filament overrides
of Print preset values, namely Avoid Crossing Perimeters.
2020-12-14 15:58:47 +01:00
enricoturri1966
cdb05d103a
Tweaked clamping of max toolpaths width
2020-12-14 15:11:38 +01:00
enricoturri1966
9605e235b8
#5378 - Do not apply machine limits for non-Marlin firmwares
2020-12-14 14:02:50 +01:00
Vojtech Bubnik
12303d93d5
Fixed previous merge
2020-12-14 12:49:16 +01:00
Vojtech Bubnik
e90120994e
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2020-12-14 12:47:59 +01:00
Vojtech Bubnik
b5f95dd4b4
Avoid crossing perimeters max detour could newly be specified
...
in percentage of the direct path.
2020-12-14 12:45:49 +01:00
Vojtech Bubnik
530148575b
Avoid crossing perimeters max detour could newly be specified
...
in percentage of the direct path.
2020-12-14 12:36:55 +01:00
Vojtech Bubnik
fef729b75a
Follow-up to c34b683970
...
Fix of Slic3r::GUI::format/format_wxstr() for wxString&&
2020-12-14 12:23:29 +01:00
Vojtech Bubnik
c34b683970
Fix of Slic3r::GUI::format/format_wxstr() for non-const wxString references.
...
Vojtech seemingly does not understand perfect forwarding:
Why Slic3r::internal::format::cook(T&& arg) is taken for non-const wxString reference?
2020-12-14 12:06:39 +01:00
Vojtech Bubnik
57ba953b2e
PresetUpdater - exceptions reformatted, not throwing an exception
...
on Linux when changing file attributes, as changing file attributes
may fail when writing onto FAT file system, which does not support
some of the common Unix file attributes.
2020-12-14 11:05:12 +01:00
YuSanka
0f11ff8525
Follow-up on fbf2978190
: Refresh Cut gizmo immediately,
...
when state of "inches" checkbox is changed.
+ Fixed update of Z value, when Cut gizmo is in mm
2020-12-14 09:06:19 +01:00
David Kocik
2b3d9359d4
Typo in preferences string about single instace
2020-12-13 21:21:18 +01:00
Yuri D'Elia
44f71f0ed1
Include <atomic> for std::atomic where needed
...
Fixes build on linux using clang 11
2020-12-13 19:41:47 +01:00
Vojtech Bubnik
9fdf8c8b8d
Fixed retrieving of the "saved in inches" flag from 3MF.
...
Fixed "import STL from Inches" - it should always scale up even if the
object is bigger than 3x3x3mm.
2020-12-12 18:54:34 +01:00
Vojtech Bubnik
d3bf130e66
Merge remote-tracking branch 'remotes/origin/lm_linux_locales'
2020-12-12 12:39:17 +01:00
Vojtech Bubnik
5605088aad
Follow-up on aaaa85c1f8
...
Fix of #5007 - "Reload from disk" causes objects converted to inches to revert to mm
1) Storing and reloading the "source_in_inches" source flag from AMF and 3MF
2) When converting objects with mixed "inches" volumes, do the right thing
and do not convert those that do not need conversion.
2020-12-12 12:06:15 +01:00
Vojtech Bubnik
b62a781417
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2020-12-12 11:26:24 +01:00
Vojtech Bubnik
ccad84fb42
Follow-up on 3523bb421f
...
(Ongoing uploads while exiting dialog):
Fixed some string conversion issues.
2020-12-12 11:26:17 +01:00
Lukas Matena
0e6f9cdd0b
Linux: when available locales do not match the desired language completely,
...
list the installed locales and try to find an alternative
This should fix issues such as #3368 and #2580
2020-12-12 09:21:51 +01:00
Lukas Matena
d267a9a105
Fixed a typo in a tooltip
2020-12-12 09:15:01 +01:00
Vojtech Bubnik
0884f4fbf5
Slight rewording of the keyboard shortcuts dialog.
2020-12-12 09:11:10 +01:00
Vojtech Bubnik
621610da75
Follow up on 569200eb99
...
Improved formatting of the vector of dimensions, improved wordings
of error messages and tooltips.
2020-12-12 08:34:43 +01:00
YuSanka
8bfb2a4eef
Fix of #5315 - Height Slider heights are too squished
...
+ some code refactoring
2020-12-11 15:58:10 +01:00
David Kocik
25531d7c00
rename single instance setting in preferences
2020-12-11 15:34:09 +01:00
Vojtech Bubnik
7de0f46db4
Merge of Fix support doesn't ignore overhangs bridge anymore #5164
2020-12-11 15:14:16 +01:00
enricoturri1966
20c4b2c804
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2020-12-11 15:02:42 +01:00
enricoturri1966
5a7e4ff47c
Faster toolpaths refresh when changing options selection in preview
2020-12-11 14:59:58 +01:00
YuSanka
aaaa85c1f8
Fix of #5007 - "Reload from disk" causes objects converted to inches to revert to mm
2020-12-11 13:57:58 +01:00
enricoturri1966
7832e8aee1
Enabled tech ENABLE_GCODE_VIEWER_STATISTICS
2020-12-11 12:38:14 +01:00
enricoturri1966
9dd83a3daa
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-12-11 12:36:44 +01:00
enricoturri1966
347a7d5b7e
Disabled tech ENABLE_GCODE_VIEWER_STATISTICS
2020-12-11 12:36:26 +01:00
Vojtech Bubnik
2c8a92cacb
Some shader compilers did not seemingly like #if XXX blocks
...
if XXX was not defined. Changed to #ifdef XXX.
2020-12-11 12:27:07 +01:00
Vojtech Bubnik
9f6bf5a835
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2020-12-11 12:21:13 +01:00
Vojtech Bubnik
a2959ec944
Fix of re-slicing with multiple regions.
...
This is a fix of a bug, which was in Slic3r forever, where raw slices
were not cached, but recalculated from classified regions, where
merging the regions did not produce the original contour reliably.
Fixes [2.3.0-beta2] Odd bad slicing related to infill (?) percentage #5407
2020-12-11 12:21:07 +01:00
enricoturri1966
acf5e9a21f
Enhancements in GCodeViewer Statistics imgui dialog
2020-12-11 11:58:08 +01:00
enricoturri1966
17c9358b0b
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2020-12-11 11:52:43 +01:00
David Kocik
43c424e82b
export finished to hdd notification got fadeout after 20 sec
2020-12-11 08:40:40 +01:00
David Kocik
03028bb23e
Improved exception throwing at copy file in preset updater
2020-12-10 19:39:47 +01:00
enricoturri1966
740ffc03b4
Removed unused variables in DoubleSlider::Control
2020-12-10 15:22:18 +01:00
enricoturri1966
f6b9cdecc3
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2020-12-10 15:10:59 +01:00
Vojtech Bubnik
cc7dbf8925
Fix of compilation on OSX
2020-12-10 14:45:23 +01:00
enricoturri1966
62dedba32d
Reduced max size of index buffers to 32M indices
2020-12-10 14:36:38 +01:00
enricoturri1966
d631bf7c0c
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2020-12-10 14:36:17 +01:00
enricoturri1966
8dd98f6d66
Fixed size of GCodeViewer Statistics imgui dialog
2020-12-10 13:21:18 +01:00
Vojtech Bubnik
8d644fbcb6
1) Shader manager: Allow to override #defines programatically
...
when loading a shader file.
2) Conditional compilation of environmental mapping in gouraud.fs
using 1)
2020-12-10 13:20:25 +01:00
enricoturri1966
98515e4fa1
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_splitted_vbuffer
2020-12-10 11:55:30 +01:00
enricoturri1966
bd3f8af610
Enabled tech ENABLE_GCODE_VIEWER_STATISTICS
2020-12-10 11:52:38 +01:00
David Kocik
8522c06812
cleanup
2020-12-10 11:02:46 +01:00
David Kocik
3523bb421f
Ongoing uploads while exiting dialog
...
Ongoing uploads while exiting dialog
Ongoing uploads while exiting dialog
2020-12-10 11:02:46 +01:00
Vojtech Bubnik
48a21cae93
BitmapCache: a bit of clean-up
2020-12-10 08:54:21 +01:00
Vojtech Bubnik
bd79036d13
Replaced all "long long" types with int64_t
...
Replaced all "unsigned long long" types with uint64_t.
These "new" types better communicate their meaning and they are
guaranteed to behave the same on all platforms & compilers.
2020-12-10 08:40:15 +01:00
YuSanka
fbf2978190
Fix of #5008 - Cut tool uses mm when object is converted to inches
...
+ Localization: Updated MO for PT_BR
2020-12-10 08:31:24 +01:00
Vojtech Bubnik
e7bf03f006
Improved error reporting on misformated boost::format string.
...
Improves Prusa slicer 2.3.0 BETA 2 crash when attempting to save a machine change #5418
2020-12-10 07:56:43 +01:00
Vojtech Bubnik
06df87da35
Fix of 298b730589
...
(linear tapering of extrusion rate for the 1st spiral vase layer)
Linear tapering could only be implemented for relative extruder distances.
For absolute extruder distances, all the G1 Exxx in all spiral vase layers
would have to be adjusted, which is much more complex and risky to do now
before release.
2020-12-09 16:52:41 +01:00
Vojtech Bubnik
fb7098e542
Sequential Mode: Improved error message to explain that the spiral mode
...
may be enabled for multiple objects in sequential mode.
Fixes Allow for multiple objects while Spiral Vase mode is on #2500
2020-12-09 15:40:21 +01:00
Vojtech Bubnik
13b968186e
fix of unit tests
2020-12-09 15:12:17 +01:00
YuSanka
935725b27b
Fixed debug assert, when add ColorChange on DoubleSlider
...
(vase mode specific issue)
2020-12-09 15:04:43 +01:00
Vojtech Bubnik
298b730589
Implemented linear tapering of extrusion rate for the 1st spiral vase layer
...
above the solid infill. Should fix
first layer of vase (after bottom layers) is bulging (0.6nozzle, 0.4 layerhight) #3712
Adjust flow of the "second" layer in spiral vase mode #2795
2020-12-09 14:54:26 +01:00
Vojtech Bubnik
364300055e
Fix of spiral vase mode with holes in the bottom: Holes in the bottom layers
...
(non-spiral vase layers) were being closed.
Fixes Bad slicing in vase mode (unexpected bridge and solid infill layers) #3326
Fixes Model with holes in the base does not slice properly in "Vase Mode" #5359
2020-12-09 14:54:26 +01:00
enricoturri1966
5470af3938
Fixes and tweaks in keyboard shortcuts dialog
2020-12-09 14:03:30 +01:00
YuSanka
a2494689b9
Localization : fixed a typo
2020-12-09 13:23:36 +01:00
YuSanka
bbb56e516e
Suppress to save the preset with the name started/ended with space character (related to #5291 )
2020-12-09 13:16:03 +01:00
YuSanka
9892394eb0
Fix for "Import config bundle with physical printers" ( #5393 )
2020-12-09 12:46:26 +01:00
YuSanka
3cbb19bd73
Added info notification, when Color Change G-code is empty and user try to add color change on DoubleSlider.
2020-12-09 11:36:56 +01:00
David Kocik
3f11b7dea5
GLCanvas on_idle changes to do updates on notifications correctly. Changed updating separators in GLToolbar.
2020-12-09 11:05:21 +01:00
David Kocik
2659ac567a
Timeout in requesting renders at notification fadeout.
2020-12-09 11:05:21 +01:00
Vojtech Bubnik
1210a250c8
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2020-12-09 11:02:45 +01:00
Vojtech Bubnik
4af3819c85
Fixing the unit tests of PlaceholderParser.
2020-12-09 11:02:31 +01:00
YuSanka
5a9e94e67d
Fix for #5142
2020-12-09 10:23:39 +01:00
enricoturri1966
070ee5308c
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-12-09 10:23:13 +01:00
enricoturri1966
982ae7fa85
Tweaked layout of preference dialog
2020-12-09 10:23:03 +01:00
Vojtech Bubnik
562c0bd563
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2020-12-09 09:27:03 +01:00
Vojtech Bubnik
7353d8c6e9
Rework of Add random function for gcode macros. #5219 after merge:
...
The thread local storage variables for the random number generator
were replaced by an external context variable.
Thread local storage is a scarce resource.
2020-12-09 09:19:46 +01:00
Vojtech Bubnik
1e190affcf
Merge branch 'pa_macro_random_support' of https://github.com/ardenpm/PrusaSlicer into ardenpm-pa_macro_random_support
2020-12-09 07:33:41 +01:00
Lukáš Hejl
bb2eecb42c
Fix of #4060 - Add check for the case that all ranges of a volume do not contain any Z.
2020-12-09 07:28:18 +01:00
Lukáš Hejl
0ad135ff93
Fix of #4732 - In spiral vase mode, use the number of layers instead of the value of bottom solid layers if a printed object has a smaller number of layers than the value of bottom solid layers.
2020-12-09 07:21:14 +01:00
Lukáš Hejl
4c35250531
Fix of #5004 - Disable retract on layer change also for filament overrides.
2020-12-09 07:16:01 +01:00
Vojtech Bubnik
2d6b694261
Fix of Place on face:
...
1) Decreased "gimbal lock" epsilon 10x
2) Got rid of unnecessary back and forth conversions which led to numerical inacurracies
This should fix issues #5172 , #5011 and #5398
2020-12-09 06:20:41 +01:00
Vojtech Bubnik
6e3fae3865
Fix of #5319 - presets inherited from renamed presets using the old
...
preset name in the "inherits" field were losing the "inherits" flag.
2020-12-08 17:45:59 +01:00
YuSanka
661ad1735b
Changed layout for for the Preferences Dialog (related to #5381 )
...
+ Fixed #5312
+ Deleted unused now EVT_TAB_VALUE_CHANGED and EVT_TAB_PRESETS_CHANGED
2020-12-08 17:10:17 +01:00
enricoturri1966
b7ac74bc42
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-12-08 15:56:08 +01:00
enricoturri1966
5bd443cd1f
#4936 - Take toolpaths width and height from gcode decorations, if available
2020-12-08 15:55:53 +01:00
Vojtech Bubnik
5f456ebbe7
Merge branch 'lh_avoid_crossing_perimeters'
2020-12-08 13:39:33 +01:00
YuSanka
90248bffa5
Parameter "G-code thumbnails": check value for the out of range
2020-12-08 13:29:47 +01:00
Lukas Matena
2d711d8646
Added missing includes for gcc
2020-12-08 12:31:59 +01:00
YuSanka
3134359505
OSX specific: Fixed shortcut "Cmd+M"
2020-12-08 12:27:39 +01:00
enricoturri1966
1532e02b74
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-12-08 11:43:14 +01:00
enricoturri1966
bf3786be59
ENABLE_RENDER_STATISTICS -> FPS averaged to last second
2020-12-08 11:43:00 +01:00
Vojtech Bubnik
ca2691c67c
Fix for OSX
2020-12-08 10:49:30 +01:00
YuSanka
d7412d4e54
Increase min height for the ObjectList.
...
Related to the FR #5162
2020-12-08 10:11:11 +01:00
Vojtech Bubnik
c7aee35552
Merge of Fix proposal for crash on rectilinear #5399
2020-12-08 08:45:16 +01:00
Vojtech Bubnik
6fe0b09a04
Fixes "Add instance" and "Remove instance" hotkeys don't work when object is selected via de object browser #5350
...
Captures the +- hotkeys in the object list to add / remove an instance.
2020-12-08 08:30:15 +01:00
Richard Hartmann
1874c42bb9
PrintConfig.cpp: Fix grammar mistake
2020-12-07 22:04:57 +01:00
Vojtech Bubnik
3e22b39a42
Improved error handling when loading invalid preset bundle. Improves
...
Import Configuration bundle can fail if profile names have spaces at the end #5291
2020-12-07 21:10:20 +01:00
Vojtech Bubnik
59d9f35439
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2020-12-07 19:47:57 +01:00
Vojtech Bubnik
ffea00454e
Fixed missing include.
2020-12-07 19:47:37 +01:00
YuSanka
2a44fbefd6
Don't ask about inches if we load project file (3mf or amf). #5006
2020-12-07 19:36:54 +01:00
YuSanka
acd1782910
In AboutDialog added "Copy Version Info" button (FR #4990 )
2020-12-07 19:04:09 +01:00
YuSanka
7e3d8c3142
Fixed localization for the name of Infill pattern
...
(hot fix for the b27e18c970
)
2020-12-07 18:40:10 +01:00
Vojtech Bubnik
c7586e5713
Fix of Command line slicing bad gcode #5029
...
SL1 file was exported with a .gcode suffix if the user did not provide
output file name for SLA command line slicing.
2020-12-07 18:39:33 +01:00
tamasmeszaros
598ac290a1
Fix for bad wipe tower handling in arrangement
...
fixes #5320
2020-12-07 18:00:10 +01:00
Vojtech Bubnik
b27e18c970
Fix of fill_pattern handling in the GUI with 100% infill off-by-one #4999
2020-12-07 17:52:45 +01:00
YuSanka
042bfe6be4
Fixed localization for "Compatible presets" dialog. Relate to issue #4975
2020-12-07 17:31:46 +01:00
Vojtech Bubnik
333577b905
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2020-12-07 17:09:11 +01:00
Vojtech Bubnik
780418435a
Fix of Custom profiles prevent the slicer from starting up #4996
...
Creative user made a profile inherit from itself.
2020-12-07 17:09:02 +01:00
YuSanka
569200eb99
Added "G-code thumbnails" parameter to the Printer Settings tab
2020-12-07 16:42:20 +01:00
Vojtech Bubnik
82dfb990ef
Fix of [BUG]Post-Processing Scripts not called while slicing from command line #4903
2020-12-07 15:21:36 +01:00
Vojtech Bubnik
b909ce7a3d
Fix of [BUG]Environment variables not all exported while calling Post-Processing Scripts #4901
2020-12-07 14:59:36 +01:00
YuSanka
fe18ce16fb
MSW specific: Fixed assert "Assert failure" failed in
...
wxPaintDCImpl::wxPaintDCImpl(): wxPaintDCImpl may be created only in EVT_PAINT handler
2020-12-07 12:18:47 +01:00
Vojtěch Bubník
d4c949dab6
Merge pull request #4734 from wavexx/fix_new_instance_shortcut
...
Use Ctrl+Shift+I to open a new instance instead of Ctrl+I
2020-12-07 11:28:03 +01:00
enricoturri1966
1185ec9d2a
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-12-07 10:30:11 +01:00
enricoturri1966
f77475e501
Tech ENABLE_SHOW_WIPE_MOVES set as default
2020-12-07 10:29:50 +01:00
Vojtech Bubnik
8bf55273c3
fix of incorrect keyboard prefix shown on OSX for Arrange edit field
...
Arrange Options dialogue improvement request #5217
2020-12-07 10:02:31 +01:00
enricoturri1966
8a20b09d08
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-12-07 09:34:47 +01:00
enricoturri1966
17f00562de
Tech ENABLE_SHOW_OPTION_POINT_LAYERS set as default
2020-12-07 09:34:31 +01:00
Vojtech Bubnik
44dacdd4f8
Manual merge of fix png alpha channel support for gtk3 #5298
2020-12-07 09:20:12 +01:00
enricoturri1966
10be5d1361
Replace F5 with Ctrl+Shift+R as shortcut key for reload from disk commands on MAC
2020-12-07 08:39:43 +01:00
Vojtech Bubnik
625e69a199
Fixed typo (incopatible -> incompatible)
2020-12-05 10:56:58 +01:00
Vojtech Bubnik
f904752ba7
Fix of install wizard: Escape ampersands in printer models.
2020-12-05 09:55:09 +01:00
Vojtech Bubnik
575ec6ef65
Linux specific: Documented an improved way of offering language
...
selection on Linux.
2020-12-05 09:12:28 +01:00
Vojtech Bubnik
9b05513ea9
Fix of rework of loading configs from 3MFs, AMFs, gcodes
...
as modifications of existing user or system presets.
2020-12-05 08:14:04 +01:00
Lukas Matena
997ee971b4
Bugfix: custom seam identification
...
Bounding boxes of polygons could overlap. Ask the AABB tree for all possible candidates.
Might be faster than searching for the closest triangle, that requires traversing the whole depth of the tree every time.
2020-12-05 02:02:22 +01:00
Lukas Matena
985a4a8bf3
Bugfix: custom seam did not work on first layer with elephant foot compensation active
2020-12-05 00:02:43 +01:00
Lukas Matena
98434eb77b
Bugfix: seam enforcers not always respected ( #5137 , #5294 )
2020-12-05 00:02:43 +01:00
Lukas Matena
91cc119146
Added missing includes for gcc
2020-12-05 00:02:43 +01:00
YuSanka
72911243a7
Fixed wrong selection, when try to change printer preset from logical to physical and then in UnsavedChangesDialog select "Cancel"
2020-12-04 21:23:12 +01:00
YuSanka
f7b32258aa
UnsavedChangesDialog: Fixed a crash when we trying to switch a profile after importing of the 3mf
...
+ Fixed typo in "__linux__"
2020-12-04 17:16:08 +01:00
enricoturri1966
6c8b0276e6
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-12-04 15:36:41 +01:00
enricoturri1966
1445c0ad3a
Enabled tech ENABLE_RENDER_STATISTICS
2020-12-04 15:36:30 +01:00
YuSanka
497412fcf4
Delete whole object, when all instances are selected. Fix for #5191
2020-12-04 14:19:51 +01:00
enricoturri1966
75a1a699a7
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-12-04 14:19:08 +01:00
enricoturri1966
6eb202af0b
GCodeViewer - Disable Tab and collapse sidebar events
2020-12-04 14:18:54 +01:00
Vojtech Bubnik
9c959d14e0
Limiting the resolution of G-code export for retract/deretract feedrate
...
to three digits.
Fixes excessive precision in gcode? #5362
2020-12-04 13:37:36 +01:00
Vojtech Bubnik
efc1100eb0
Fixed missing include
2020-12-04 13:37:36 +01:00
YuSanka
e40ed644c8
Show the PrintHostDialog on the same display as an application window. Probably, fix for #5044
2020-12-04 13:34:44 +01:00
Vojtech Bubnik
6981372da0
Fixed missing include (OSX - clang specific)
2020-12-04 13:17:30 +01:00
YuSanka
e610d2d2f6
Localization: Fixed some phrases. Updated POT and NL dictionary.
2020-12-04 13:08:48 +01:00
Vojtech Bubnik
4f4d136f19
Fix of cooling preset hints
2020-12-04 13:05:25 +01:00
enricoturri1966
7a54c4fdfe
Fixed conflits after merge with master
2020-12-04 12:33:44 +01:00
enricoturri1966
26982b16c7
#5080 - Reworked logic for automatic selection of current view type in preview
2020-12-04 12:31:50 +01:00
Vojtech Bubnik
0688778a24
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2020-12-04 11:53:29 +01:00
Vojtech Bubnik
e1fc0b17a2
Ramp up layer cooling fan over X layers #848
...
Fan speed will be ramped up linearly from zero at layer disable_fan_first_layers
to maximum at layer full_fan_speed_layer. full_fan_speed_layer will be
ignored if lower than disable_fan_first_layers, in which case
the fan will be running at maximum allowed speed at layer
disable_fan_first_layers + 1.;
WIP: The cooling PresetHints are likely not finalized yet.
2020-12-04 11:53:02 +01:00
Vojtech Bubnik
e42e25c933
1) Storing the physical_printer_settings_id into the 3MF, AMF, GCode.
...
2) Activating the physical_printer_settings_id when loading from 3MF, AMF, GCode.
The physical printer is only activated if it references the printer_settings_id
loaded from the same file.
3) When loading the presets from 3MF, AMF, GCode, the "external" profiles
are no more created for profiles which differ from the local profiles
the loaded profiles reference. Instead, the referenced profile is activated
and modified with the loaded preset. If the referenced profile does not
exist, but the profile refers to a system profile with the "inherits"
fileds, the system profile is loaded and modified instead.
This works for all profiles with the exception of multi-extruder
printer with multiple filament profiles modified. In that case
the first modified filament profile will be loaded as modified,
while the other modified profiles will be loaded as "external".
This should fix
Physical printer + 3mf file, wrong preset used to generate gcode #5178
and possibly
https://github.com/prusa3d/PrusaSlicer/issues/5272
2020-12-04 10:48:51 +01:00
enricoturri1966
dcee9d7bfe
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_animations
2020-12-04 10:27:54 +01:00
enricoturri1966
4870656877
Import all valid files when dragging and dropping a set of files on the application
2020-12-04 09:15:55 +01:00
enricoturri1966
6835c5ad35
Fixed build on MAC
2020-12-03 15:40:52 +01:00
enricoturri1966
cc0688678c
Fixed conflicts after merge with master
2020-12-03 15:27:34 +01:00
enricoturri1966
bcb2a4884b
NotificationManager -> Separate notification update from its render to reduce the amount of scene refresh
2020-12-03 15:12:32 +01:00
tamasmeszaros
4b040b8569
Merge branch 'tm_fix_split_arrange_crash'
...
fixes #2209
2020-12-03 15:00:06 +01:00
tamasmeszaros
310de2f2ef
Fix crash when splitting objects
...
fixes partially #2209
2020-12-03 14:58:56 +01:00
tamasmeszaros
91b1d469eb
Fix arrange with malformed contours
2020-12-03 14:58:09 +01:00
Vojtech Bubnik
dea4c13677
Revert "Fix of Proxy secured print host URL. Special character on password #4187 "
...
The whole URL line was incorrectly escaped including the http:// prefix,
which is not correct.
This reverts commit 1b720dbc3d
.
2020-12-03 14:20:04 +01:00
Vojtech Bubnik
6fd1143b1c
Fix of Unexpected Behavior @ Application Open and When GCODE is Generated #5254
...
Icon not loaded from the exe on Windows.
2020-12-03 14:14:40 +01:00
tamasmeszaros
624494eab6
Merge branch 'tm_arrange_bugfixes'
2020-12-03 14:09:55 +01:00
enricoturri1966
639ef33aab
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-12-03 13:49:20 +01:00
enricoturri1966
2a0a9af0c9
#5360 - GCode Viewer -> Added menu command to reload gcode file
2020-12-03 13:48:54 +01:00
YuSanka
6124f677ae
Suppressed a check of printer_presets for the containing information about "Print Host upload", when presets ate exported from the amf/3mf
2020-12-03 13:25:23 +01:00
Vojtech Bubnik
3dd9b8c718
Further improvement error reporting with buggy custom G-code sections #1516
...
1) The macro-processor sanitizes the source code line for invalid UTF-8
characters. Ideally these invalid characters would be replaced with ?,
they are just dropped as of now. Better than showing an empty string
when converting to wxString though.
2) G-code export collects full error message for 1st occurence of an error
for each custom G-code block.
3) The composite error message now displays the errors collected in 2).
4) The error window is now scaled bigger and the Slicer logo is smaller
if the text is to be rendered with monospaced font, as the monospaced
text will not be word wrapped.
2020-12-03 12:50:24 +01:00
tamasmeszaros
844ea89432
Fix out of bed items after arrange.
...
Disabled outline decimation for arrange and added very small (EPSILON) safety offset to bed detection boundaries.
2020-12-03 12:00:12 +01:00
YuSanka
b251fea5fe
Typo fix for b9c53adddb
2020-12-03 11:31:15 +01:00
Vojtech Bubnik
306acbdfb4
Improvement of Improve error reporting with buggy custom G-code sections #1516
...
Errors in the file output templates are reported in mono-spaced font,
so that the arrow character ^ is displayed at the right column
pointing to the offending spot.
2020-12-03 11:03:16 +01:00
YuSanka
7afef2bbb5
OSX specific: Hot fix for the c503a4e424
2020-12-03 10:40:17 +01:00
YuSanka
c503a4e424
Increased width for Infill ComboBox and EditCtrls from Manipulation panel on right panel
...
+ Added updated POT-file
2020-12-03 10:35:21 +01:00
Lukáš Hejl
98055de28c
External paths avoid crossing perimeters of holes
2020-12-03 09:43:21 +01:00
Vojtech Bubnik
0a33aedc3a
Documentation of OctoPrint behind HAProxy with basic auth enabled
...
in the print_host tooltip.
Improves Feature request: support for basic auth for octoprint #650
2020-12-03 08:22:55 +01:00
Vojtech Bubnik
1b720dbc3d
Fix of Proxy secured print host URL. Special character on password #4187
...
A raw URL was passed to libcurl, while it should have been URL encoded.
2020-12-03 08:07:13 +01:00
Vojtech Bubnik
597a158a6e
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2020-12-03 07:30:26 +01:00
Vojtech Bubnik
4412ba0f92
Fixes Spelling Error in Unsaved changes dialog ( #5363 )
2020-12-03 07:30:06 +01:00
tamasmeszaros
4e9254ec5a
Follow up fix for bed filling
...
fixes: 2813db8906
2020-12-02 18:08:30 +01:00
tamasmeszaros
869ae0247e
Use smarter object function in partial arrangement with empty bed.
2020-12-02 17:53:22 +01:00
tamasmeszaros
2813db8906
Fix for bed filling with some existing items out of bed.
2020-12-02 17:52:40 +01:00
tamasmeszaros
4e90df1ea5
Fix status indication glitch for bed filling
2020-12-02 17:50:12 +01:00
tamasmeszaros
4f7f08d0de
Further improvement on arrange settings handling
2020-12-02 14:04:39 +01:00
david kocik
ae926bd1ed
error_code in boost::filesystem::space to ensure the drive exists. Fix of #5354
2020-12-02 12:12:24 +01:00
YuSanka
b9c53adddb
Linux specific, dark mode: Fixed a black text on a black background for the view mode buttons.
2020-12-02 11:58:08 +01:00
Vojtech Bubnik
89ff8eef10
Preview class refactoring: Moved initialization of member variables
...
to header.
2020-12-02 11:38:10 +01:00
tamasmeszaros
8df4d6a170
Add separate arrangement distance control for SLA mode
2020-12-02 10:28:13 +01:00
YuSanka
9d34d350a5
Localization: Update POT
...
+ Fixed translation for the "Extruder n" category on the Printer Settings Tab
+ Fixed a crash, when scrolling inside Search imGui with some localization (e.t. Russion)
2020-12-01 16:44:53 +01:00
Lukáš Hejl
f25e5c0ec6
Merge remote-tracking branch 'origin/master' into lh_avoid_crossing_perimeters
2020-12-01 14:31:22 +01:00
Lukáš Hejl
f0616b0736
Fixed return value of liang_barsky_line_clipping
2020-12-01 14:28:27 +01:00
tamasmeszaros
3e73473334
fix rotation for initial placement
2020-12-01 14:12:20 +01:00
tamasmeszaros
8027f6608a
Fix arrange distance with enabled sequential printing
...
fixes #5258
2020-12-01 14:08:07 +01:00
David Kocik
d47e6bfd5c
Stop showing Exporting finished notification after exporting error.
2020-12-01 13:04:19 +01:00
David Kocik
994b69f19b
cleanup
2020-12-01 12:06:10 +01:00
David Kocik
247f3a7dbe
Set boost to use utf8 for system messages (in cmake). Fix of #5180 .
2020-12-01 12:06:10 +01:00
enricoturri1966
42a00a32df
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_animations
2020-12-01 10:43:32 +01:00
enricoturri1966
24a8f832bc
Fixed activation of shortcut dialog with '?' key
2020-12-01 10:43:04 +01:00
enricoturri1966
e842077cc6
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_animations
2020-12-01 10:18:00 +01:00
enricoturri1966
430648471a
Follow-up of 6ae1a10614
- Fixed typo
2020-12-01 10:17:35 +01:00
enricoturri1966
67d42c7053
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_animations
2020-12-01 08:45:50 +01:00
enricoturri1966
dc736f7855
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer
2020-12-01 08:33:20 +01:00
enricoturri1966
6ae1a10614
#5333 - Reworked navigation of preview's sliders using the keyboard
2020-12-01 08:33:06 +01:00
Vojtech Bubnik
6af23eb380
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2020-12-01 08:24:00 +01:00
Vojtech Bubnik
e62bb4a7c7
Fix of Head crash on completion with sequential printing #5349
...
In addition to an existing "layer_z" placeholder variable,
a new "max_layer_z" has been added to custom G-code sections accumulating
maximum of "layer_z" over the print. This value may be used for example
in the end G-code of a sequential print to lift the print head
up before travel over the whole print bed.
2020-12-01 08:23:46 +01:00
tamasmeszaros
f04db7b595
Fix Arrange dialog distance input field usability
2020-11-30 15:57:53 +01:00
YuSanka
7e33047804
UnsavedChangesDialog: Linux specific: Made a first column wider
...
+ Field: Made def_width() wider
2020-11-30 13:48:22 +01:00
enricoturri1966
8cc46a450b
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_animations
2020-11-30 13:46:03 +01:00
enricoturri1966
0d4123192f
Removed GLCanvas3D from parameters of NotificationManager methods
2020-11-30 13:45:17 +01:00
Pascal de Bruijn
3a3e9271b1
Field.cpp: wider def_width_wider
...
This fixes truncated ComboBox present on some systems
2020-11-30 04:25:13 -08:00
Vojtech Bubnik
2e73a75951
Linux specific fix for switching languages: PrusaSlicer 2.3 forces
...
en_GB locale when switching to English from the user interface,
while often Linux users have just en_US locales configured.
With this commit the user will have to select English (U.S.) or
English (U.K.). Usually English (U.S.) will work.
Vojtech is scared to touch the code for the other platforms (Windows and Mac)
as the language switching has been reworked multiple times and it is quite
fragile.
2020-11-30 11:57:16 +01:00
tamasmeszaros
982e6eb55b
Don't apply result if fill bed was canceled.
2020-11-30 09:38:22 +01:00
Vojtěch Bubník
031eca533e
Merge pull request #5159 from mloidl/repetier_fix
...
Possible segmentation fault in physical printer dialog when Host is set to "Repetier"
2020-11-30 09:36:57 +01:00
Vojtech Bubnik
00f900edef
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2020-11-30 08:50:07 +01:00
Vojtech Bubnik
518cbfa192
Renamed API key / user/password auth choices for SL1
2020-11-30 08:49:09 +01:00
Lukáš Hejl
f917b83706
Fixed compiler warnings
2020-11-29 17:29:11 +01:00
Lukáš Hejl
87879034f6
Merge remote-tracking branch 'origin/master' into lh_avoid_crossing_perimeters
...
# Conflicts:
# src/libslic3r/MotionPlanner.cpp
# src/libslic3r/libslic3r.h
2020-11-29 17:27:23 +01:00
Lukáš Hejl
dd97eaa812
Fixed case when lslices in Layer is empty
2020-11-29 17:26:02 +01:00
Lukáš Hejl
f16e8f1a72
Fixed uninitialized variable in ElephantFootCompensation
2020-11-29 14:00:34 +01:00
Lukáš Hejl
55c282d85d
Revamp of implementation of the avoid crossing perimeters algorithm.
...
The strategy for the avoid crossing perimeters algorithm has been redesigned. But external travels (travel between objects or supports) have not been solved yet. For these travels is used a direct path between two points.
Much of the code has been reworked, which leads to significant speedup compared to the previous implementation.
Also, several potential bugs have been fixed.
2020-11-29 13:58:36 +01:00
Lukas Matena
3f999acef8
Added a missing include (gcc 8.4)
2020-11-28 20:51:57 +01:00
Vojtech Bubnik
30d7ef2cf9
Bumped up version number to beta1.
...
Changed the location of PrusaSlicer profiles from PrusaSlicer-alpha
to PrusaSlicer-beta.
2020-11-28 11:14:53 +01:00
Vojtech Bubnik
3dd6d7e878
Escaping of ampersands in label texts (otherwise the ampersand is
...
processed as a hotkey prefix and not displayed at all).
Solves visualization of the new profile names containing ampersands
(Original Prusa Mini & Mini+)
Also the text was not correcly converted from UTF8.
2020-11-28 11:13:46 +01:00
David Kocik
6beb493255
Logging level at LoadFromOtherInstanceEvent
2020-11-28 10:56:42 +01:00
YuSanka
7ab1fcaa5c
Fixed update after editing for "infill_ancor" and "infill_ancor_max" parameters.
...
* Update value only if it is changed
* Show info dialog (suggestion to change mm to %) only when parameter value is bigger than 100
2020-11-28 01:18:58 +01:00