3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
943 Commits 1 Branch 1 Tag 249 MiB
f0579e59bd
Commit Graph

812 Commits

Author SHA1 Message Date
Alessandro Ranellucci
fbfbfac2b6 New --top-solid-infill-speed option. Also, --solid-infill-speed and --small-perimeter-speed can be expressed as ratios too. #174 #151 2012-06-06 19:59:20 +02:00
Alessandro Ranellucci
2ccb443c2f Bugfix: not retracting between infill of different islands using low infill densities. #242 2012-06-06 19:38:35 +02:00
Alessandro Ranellucci
58a696e666 Lift Z when changing layer too 2012-06-06 19:20:43 +02:00
Alessandro Ranellucci
8883df6692 Warn user when object couldn't be split 2012-06-06 19:00:34 +02:00
Alessandro Ranellucci
13e10abbbe Fixed regression causing some models not to be sliced correctly. #410 2012-06-06 18:57:46 +02:00
Alessandro Ranellucci
c7af74884f Legacy config files were not correctly supported 2012-06-06 18:47:11 +02:00
Alessandro Ranellucci
82dd3c7a3e New --perimeters-extrusion-width and --infill-extrusion-width options. #302 2012-06-06 18:05:03 +02:00
Alessandro Ranellucci
8a031fe501 New --first-layer-extrusion-width option. #385 2012-06-06 17:29:12 +02:00
Alessandro Ranellucci
d412820733 Update: preview area was not updating to the largest side of the build area 2012-06-06 16:18:41 +02:00
Alessandro Ranellucci
16b774603c Accept either absolute or relative values for --first-layer-height. #151 2012-06-06 16:11:38 +02:00
Alessandro Ranellucci
896c7e952e Renamed bottom_layer_speed to first_layer_speed for consistency 2012-06-06 15:52:21 +02:00
Alessandro Ranellucci
4a188f8566 Support for legacy config files containing bottom_layer_speed_ratio. #151 2012-06-06 15:48:14 +02:00
Alessandro Ranellucci
91ffb74429 Accept either absolute or relative values for --bottom-layer-speed. #151 2012-06-06 15:43:54 +02:00
Alessandro Ranellucci
aedb6cc35f Accept both relative and absolute extrusion width values. #151 2012-06-06 15:23:34 +02:00
Alessandro Ranellucci
2e3c8241e4 Merge pull request #407 from beanz/simplify-check-manifoldness 
Remove grep that is effectively repeated.
 2012-06-05 01:57:45 -07:00
Josh McCullough
9da034a042 fixes #409 2012-06-05 10:55:02 +02:00
Mark Hindess
2689f49ef8 Remove grep that is effectively repeated. 2012-05-31 18:15:40 +01:00
Alessandro Ranellucci
ea83c562c1 Fixed regression caused by sequential printing code preventing skirt to extend past first layer. #396 2012-05-31 09:37:39 +02:00
Alessandro Ranellucci
3ef86ad6ff Allow loading multiple files at once. #402 2012-05-31 09:26:30 +02:00
Alessandro Ranellucci
8aa20cd784 Fixed the "Export SVG..." menu item. #399 2012-05-30 12:06:01 +02:00
Alessandro Ranellucci
5eae22f8b0 Enforce prompt when overwriting G-code files. #398 2012-05-30 11:55:46 +02:00
Alessandro Ranellucci
99b265a89a Fixed regression causing bad slicing 2012-05-29 17:12:00 +02:00
Alessandro Ranellucci
26051d12ef Bugfix: fatal error when a non-manifold object is processed on a non-thraeded perl 2012-05-29 17:02:47 +02:00
Alessandro Ranellucci
d8d2f73aff Fixed regression causing fatal errors with many objects. #394 2012-05-29 14:54:20 +02:00
Alessandro Ranellucci
af7ccb9fc1 Refactor resource paths 2012-05-29 14:19:14 +02:00
Alessandro Ranellucci
4db416773c Fixed typos in bed temperature M-codes. #386 2012-05-29 09:40:42 +02:00
Alessandro Ranellucci
bc4b4a981b Take extruder clearance radius into account when autopositioning 2012-05-29 09:38:53 +02:00
Alessandro Ranellucci
ce3e2d396e Fixed regression preventing STL export from working. #387 2012-05-29 09:35:57 +02:00
Alessandro Ranellucci
e383d5e02d Move struct format to constant 2012-05-28 20:29:51 +02:00
Alessandro Ranellucci
34e3dfdb08 Large memory savings (down to about 50%) for high-res input files 2012-05-28 19:58:27 +02:00
Alessandro Ranellucci
efdf266df1 Removed useless Polygon constructor and some cleanup 2012-05-23 11:51:20 +02:00
Alessandro Ranellucci
5a78111efa Options to set extruder clearance for sequential printing and graphical preview of collisions 2012-05-23 11:47:52 +02:00
Alessandro Ranellucci
2c28d2f874 Bugfix: with 0 solid layers, no infill was generated at all on fist and last layer. #325 2012-05-22 12:24:48 +02:00
Alessandro Ranellucci
e7d609db12 Fix previous commit about slicing from smallest to tallest 2012-05-21 20:23:17 +02:00
Alessandro Ranellucci
e4b37db13f Print objects from the smallest to the tallest to avoid extruder collisions (this applies when using the complete_objects setting) 2012-05-21 20:19:30 +02:00
Alessandro Ranellucci
181f750618 Invert SVG colors for DLP printing. #380 2012-05-21 18:29:19 +02:00
Alessandro Ranellucci
ce6b4aeaee New option to print each object completely before moving onto next one (watch out for extruder collisions, Slic3r isn't doing any check since it doesn't know its shape) 2012-05-20 20:08:59 +02:00
Alessandro Ranellucci
494f4f94bf After recent memory optimizations, no solid layers were made when using fill density == 0 2012-05-20 17:28:53 +02:00
Alessandro Ranellucci
67a076b360 Removing warnings here and there 2012-05-20 17:21:31 +02:00
Alessandro Ranellucci
2ae2c6a311 Remove thread warnings 2012-05-20 16:29:52 +02:00
Alessandro Ranellucci
59ba34caf3 Fix toolbar on Windows. #354 2012-05-20 16:24:10 +02:00
Alessandro Ranellucci
d550f3fb5f Fixed regression preventing top solid shells to be computed 2012-05-20 13:03:34 +02:00
Alessandro Ranellucci
731367a6a0 Bugfix, support material still not working well after memory optimizations 2012-05-20 11:44:30 +02:00
Alessandro Ranellucci
1998801a58 Read OBJ files. #324 2012-05-20 11:40:37 +02:00
Alessandro Ranellucci
fbe70ac15b Remove debugging statement 2012-05-20 11:08:44 +02:00
Alessandro Ranellucci
3c8dbcef4a Do not store normals and save a lot of memory 2012-05-20 11:05:16 +02:00
Alessandro Ranellucci
74c00cdb7a Yes, recent memory optimizations broke concentric infill too 2012-05-19 23:47:36 +02:00
Alessandro Ranellucci
4aa85f4571 Fixed arcs.t to work with new serialization mechanism 2012-05-19 23:39:36 +02:00
Alessandro Ranellucci
159ca3f65e Accept --threads 1 on non-threaded perls too 2012-05-19 23:18:29 +02:00
Alessandro Ranellucci
12c6e39837 Bugfix: hole compensation was making holes too large. #348 2012-05-19 23:12:21 +02:00
Alessandro Ranellucci
0bb487fe9f Recent memory optimizations broke support material generation 2012-05-19 22:53:30 +02:00
Alessandro Ranellucci
fa4f2c8b97 New option to randomize starting points across layers 2012-05-19 22:36:29 +02:00
Alessandro Ranellucci
b360b2bcea Fixed regression causing side gaps in solid infill 2012-05-19 21:57:47 +02:00
Alessandro Ranellucci
c97ced50ff Bugfix: GUI threading issues. #369 2012-05-19 21:13:10 +02:00
Alessandro Ranellucci
9f21d5b3c2 One more debugging statement left in 2012-05-19 21:03:24 +02:00
Alessandro Ranellucci
a981ac5c8e Don't display annoying warnings about parts not fitting in the printbed 2012-05-19 20:48:26 +02:00
Alessandro Ranellucci
190875d3df Debugging statement left in 2012-05-19 20:47:29 +02:00
Alessandro Ranellucci
23ae015c49 Memory optimizations broke multiple copies 2012-05-19 20:30:46 +02:00
Alessandro Ranellucci
22f8d57b36 Memory optimizations broke thin walls 2012-05-19 19:40:51 +02:00
Alessandro Ranellucci
b246480535 Massive reduction of memory usage (down to one third). 2012-05-19 17:57:38 +02:00
Alessandro Ranellucci
882a022e3a Even more constants, less memory, more speed 2012-05-19 16:04:33 +02:00
Alessandro Ranellucci
aa9563f00b More constants, less strings => ess memory usage 2012-05-19 15:40:11 +02:00
Alessandro Ranellucci
8fe5d11624 Set number of threads from GUI and save it in config files. #154 2012-05-19 15:08:32 +02:00
Alessandro Ranellucci
b93a46969d Better icon for Export G-code button 2012-05-19 15:02:23 +02:00
Alessandro Ranellucci
a99dea9ad3 Swap rotate cw and ccw buttons 2012-05-19 15:00:51 +02:00
Alessandro Ranellucci
2d67d6b0b6 Restore 100% flow for support material 2012-05-17 22:57:59 +02:00
Alessandro Ranellucci
76e079126f Don't rearrange plate upon object rotation 2012-05-17 19:32:50 +02:00
Alessandro Ranellucci
4bffa9cb6b Use perimeter length, not area, to detect small perimeters. #355 2012-05-14 00:30:52 +02:00
Alessandro Ranellucci
2a6ad2f3f7 Bugfix: removed warnings. #365 2012-05-13 22:56:40 +02:00
Mark Hindess
5a16756aac Avoid undef errors while keeping the debug so root cause can be found. 2012-05-10 22:23:24 +01:00
Mark Hindess
9d85a19b9d Rework fix to use undef correctly. 2012-05-10 19:07:20 +01:00
Mark Hindess
5ebf6a71cd Add FE_NONE with value 0 and increment FE_TOP and FE_BOTTOM to simplify 
and correct logic.
 2012-05-09 19:57:00 +01:00
Alessandro Ranellucci
9d9cef2145 Bugfix: error when slicing twice from plater 2012-05-05 21:26:19 +02:00
Alessandro Ranellucci
698b1e808d Use a separate thread for slicing so that GUI doesn't lock up. Also, add a Cancel button. #32 #35 2012-05-05 21:08:15 +02:00
Alessandro Ranellucci
8ba6405cc9 Bugfix: some nearly-thin walls were discarded. #261 2012-05-05 17:07:38 +02:00
Alessandro Ranellucci
edbdc5ec55 New automatic detection of additional required perimeters for better quality with domes and sloping walls. #198 2012-05-05 16:36:10 +02:00
Alessandro Ranellucci
4b7e9fc284 Fixed regression causing poor adhesion of rectilinear infill to perimeters 2012-05-04 20:51:09 +02:00
Alessandro Ranellucci
abe048686b More distance between object and support material. #343 2012-05-04 20:37:51 +02:00
Alessandro Ranellucci
9070ced329 Add wxWidgets version to debug output 2012-05-04 13:51:09 +02:00
Alessandro Ranellucci
d889639d49 Use the embedded progress bar for feedback about slicing 2012-05-04 13:00:34 +02:00
Alessandro Ranellucci
83b69b18d0 Status bar and progress bar for rotation and scaling 2012-05-04 12:56:15 +02:00
Alessandro Ranellucci
32f6d0143b Display print center coordinates and fix Export STL label alignment 2012-05-04 11:47:53 +02:00
Alessandro Ranellucci
b3714b4215 Preserve number of copies when splitting an object 2012-05-04 11:26:15 +02:00
Alessandro Ranellucci
f825f9063a Moved object manipulation buttons to a horizontal toolbar 2012-05-04 11:22:56 +02:00
Alessandro Ranellucci
36da196166 First attempts to move things to a vertical toolbar. Tooltips don't work on Cocoa, though 2012-05-04 10:41:24 +02:00
Alessandro Ranellucci
9398a1f6c2 Splitting unsplittable objects now results in a no-op 2012-05-04 10:17:36 +02:00
Alessandro Ranellucci
39f0c2f822 Renamed Dashboard to Plater (with Kliment's permission ;)) 2012-05-04 10:15:33 +02:00
Alessandro Ranellucci
dde71418d4 Bugfix: skip arc compensation when holes are not round 2012-05-02 16:28:47 +02:00
Alessandro Ranellucci
847cf3c5b8 Bugfix: when slicing the same plate multiple times, the results contained old and duplicate data 2012-05-02 15:20:05 +02:00
Alessandro Ranellucci
8e0e6107a3 Fixed regression causing manifoldness warnings (and sporadic bad slicing), introduced with recent memory optimizations 2012-05-02 15:12:24 +02:00
Alessandro Ranellucci
d164d13517 Bugfix: arc compensation code was filling some small holes 2012-05-01 19:19:31 +02:00
Alessandro Ranellucci
d59d4a2c55 Bugfix: infill every N layers was consuming large amounts of memory when used with models having sloping walls. #259 2012-05-01 18:51:47 +02:00
Alessandro Ranellucci
305b7a9c93 Don't try to display buttons icons if we're on an old WxWidgets 2012-05-01 16:49:34 +02:00
Alessandro Ranellucci
a7c36846c0 Require Math::Clipper 1.07 which includes the fix for #233 2012-05-01 15:36:07 +02:00
Alessandro Ranellucci
710275f7c0 Reverse perimeter order for holes. #214 2012-05-01 15:33:24 +02:00
Alessandro Ranellucci
da43cd70b2 Prevent tiny extrusion points. #323 2012-05-01 15:25:35 +02:00
Alessandro Ranellucci
f063d100f4 Fixed regression caused about recent memory optimizations 2012-05-01 15:12:34 +02:00
Alessandro Ranellucci
21893efa68 Removed a debugging statement left in, preventing hole compensation 2012-05-01 15:09:32 +02:00
Alessandro Ranellucci
d58a741d99 Put layer number in G-code comments. #327 2012-05-01 15:06:19 +02:00
Alessandro Ranellucci
7ee08be0b8 Allow [version], [timestamp], [year], [month], [day], [hour], [minute], [second] in filenames. #318 2012-05-01 15:02:33 +02:00
Alessandro Ranellucci
49ff9a0ebe Emit G92 E0 when in relative mode. #322 2012-05-01 14:49:41 +02:00
Alessandro Ranellucci
d8b8470d54 Retract before changing tool. #319 2012-05-01 14:44:52 +02:00
Alessandro Ranellucci
e74e740ba4 Button icons 2012-05-01 13:56:11 +02:00
Alessandro Ranellucci
055ea85252 Some spacing between buttons 2012-05-01 13:27:57 +02:00
Alessandro Ranellucci
0f3cbe6fa4 Bugfix: G-code errors with multiple objects 2012-05-01 13:18:01 +02:00
Alessandro Ranellucci
770b94cb30 Set Wx app icon 2012-05-01 12:58:47 +02:00
Alessandro Ranellucci
b457089a1e Bugfix: fatal error when using --debug 2012-05-01 12:09:46 +02:00
Alessandro Ranellucci
3ed5171d20 Take bottom layer speed ratio into account when estimating layer time. #334 2012-05-01 11:48:22 +02:00
Alessandro Ranellucci
94cfc1c05f Fixed regression preventing to load config files from GUI. #336 2012-05-01 11:46:17 +02:00
Alessandro Ranellucci
ee33d570d7 Use Douglas-Peucker simplification always and remove the inefficient parallel lines merging algorithm. #277 2012-05-01 11:41:08 +02:00
Alessandro Ranellucci
08efb15f4d Further memory savings 2012-05-01 11:32:22 +02:00
Alessandro Ranellucci
25b2cdc6d9 Merge pull request #337 from olasd/master 
[GUI] Arrange the new Dashboard icons into a grid
 2012-05-01 02:07:58 -07:00
Alessandro Ranellucci
a165ad4ecb Large memory saving and speed boost 2012-05-01 10:53:52 +02:00
Nicolas Dandrimont
3ed50f2f31 Make the Dashboard buttons a little nicer 2012-05-01 10:26:49 +02:00
Alessandro Ranellucci
61e257388a Button to split loaded objects 2012-05-01 00:30:46 +02:00
Alessandro Ranellucci
91d1b21c40 Use honeycomb pattern for support material 2012-04-30 23:50:38 +02:00
Alessandro Ranellucci
54e1d934a7 Fixed regression with support material 2012-04-30 23:36:49 +02:00
Alessandro Ranellucci
4962d310bf Stick the duplicate distance setting somewhere randomly, waiting for better place and naming 2012-04-30 23:30:06 +02:00
Alessandro Ranellucci
23309e1be0 Fixed warning 2012-04-30 23:24:01 +02:00
Alessandro Ranellucci
e24990badb Update preview grid and dimensions according to bed size setting 2012-04-30 22:34:41 +02:00
Alessandro Ranellucci
19a611f832 Add Quit menu item 2012-04-30 22:23:43 +02:00
Alessandro Ranellucci
4193b1777a New button for arbitrary rotation 2012-04-30 22:14:27 +02:00
Alessandro Ranellucci
3e92587824 Add a progress bar during STL loading 2012-04-30 21:49:44 +02:00
Alessandro Ranellucci
2e897ecf0d Multithreaded thumbnail generation 2012-04-30 20:59:14 +02:00
Alessandro Ranellucci
e41b8c7435 Round skirt in preview too 2012-04-30 18:54:36 +02:00
Alessandro Ranellucci
84d9368bf6 Bugfix: error on Honeycomb infill 2012-04-30 17:55:32 +02:00
Alessandro Ranellucci
9a397ed869 Trap warning about objects not fitting in the build area 2012-04-30 17:25:08 +02:00
Alessandro Ranellucci
2a067ae41f Export STL 2012-04-30 17:10:54 +02:00
Alessandro Ranellucci
d03925a18d New GUI with plating facilities 2012-04-30 14:56:01 +02:00
Alessandro Ranellucci
4bc49dcc5b Fixed regression throwing fatal error when using --duplicate-grid 2012-04-29 19:01:18 +02:00
Alessandro Ranellucci
17a4426358 Fixed regression throwing fatal error with honeycomb infill 2012-04-29 18:05:23 +02:00
Alessandro Ranellucci
ed4a5739f6 Multiple objects autoplating (--merge, from command line only) 2012-04-29 12:51:20 +02:00
Erkki Seppälä
10d4271c01 Fix leaking FileDialog by issuing Destroy to it after it has been used 
This also works around the bug in GTK in its file system tracking/file
open dialog that causes a crash when a file (in a directory it is tracking,
such as the previous directry where an STL was sliced from) is modified
with vim.

Steps to reproduce the bug:
1) Slice a file from the GUI
2) vim test.stl in the same directory
3) i hello ESC ZZ
4) if Slic3r didn't crash to a gtk assertion failure, jump to step 2
5) if still no luck, your gtk isn't broken. What version do you have?-)
 2012-04-18 17:22:38 +03:00
Alessandro Ranellucci
e7558ce16c Bugfix: wrong flow amount for solid layers. #317 2012-04-17 09:29:41 +02:00
Alessandro Ranellucci
07edf83990 Releasing 0.7.2 2012-04-16 20:43:46 +02:00
Alessandro Ranellucci
285caffa9c Omit G92 if No Extrusion 2012-04-16 20:06:53 +02:00
Alessandro Ranellucci
8d851c24a9 Increase the flow rate for support material 2012-04-16 14:18:07 +02:00
Alessandro Ranellucci
fc0fa0c738 Remove Rectilinear2 infill 2012-04-16 14:06:52 +02:00
Alessandro Ranellucci
96d5e513b8 Rename $Slic3r::resolution to $Slic3r::scaling_factor 2012-04-16 14:05:38 +02:00
Alessandro Ranellucci
d51ba94e8a Remove XXX from dependencies 2012-04-16 14:03:36 +02:00
Alessandro Ranellucci
356e750cf4 Bugfix: support material was oversimplifying the first outer perimeter. #314 2012-04-16 13:48:55 +02:00
Alessandro Ranellucci
0d910dec84 Don't require --duplicate-distance to be positive anymore 2012-04-16 11:58:01 +02:00
Alessandro Ranellucci
cb182b8bc2 Honeycomb infill. #300 2012-04-16 11:55:14 +02:00
Alessandro Ranellucci
0faebad4da Make new support material algorithm effective 2012-04-14 19:47:33 +02:00
Alessandro Ranellucci
9c991d15d1 Don't ask for confirmation (and reset values) when duplicate is set to 'no'. #311 2012-04-14 15:37:28 +02:00
Alessandro Ranellucci
c0ec8b5865 Bugfix: fatal error under certain circumstances introduced with the recent Boost implementation 2012-04-14 15:25:42 +02:00
Alessandro Ranellucci
1845abab70 Bugfix: warnings when trying to process bridges with no anchors 2012-04-12 10:30:54 +02:00
Alessandro Ranellucci
74c02e7aed added skirt to print size calculation for --duplicate 
Conflicts:

	lib/Slic3r/Print.pm
 2012-04-11 20:44:09 +02:00
Alessandro Ranellucci
0460830372 Merge pull request #310 from triffid/fix-total-x-length 
move duplicate stuff around a bit
 2012-04-11 10:34:41 -07:00
Michael Moon
757f8a2404 move duplicate stuff around a bit 2012-04-12 03:30:15 +10:00
Alessandro Ranellucci
1c6469fc25 Allow to use x as a separator for --print-center, --bed-size, --duplicate-grid 2012-04-11 18:18:01 +02:00
Alessandro Ranellucci
134595fc99 Validation for --duplicate-grid and --bed-size 2012-04-11 17:52:06 +02:00
Alessandro Ranellucci
0b29ad123e Honor duplication options for SVG export 2012-04-11 17:46:36 +02:00
Alessandro Ranellucci
e5abb0b9df Enable/disable duplication controls 2012-04-11 17:40:10 +02:00
Alessandro Ranellucci
e58ed195fd New --bed-size option 2012-04-11 16:30:58 +02:00
Alessandro Ranellucci
d96d0a9fbf New slic3r: namespace for SVG output 2012-04-11 16:10:51 +02:00
Alessandro Ranellucci
4ae551a424 Ditch --duplicate-x and --duplicate-y, add --duplicate-grid 2012-04-11 15:58:09 +02:00
Alessandro Ranellucci
63ff01764c Document --threads, -j and throw an error when it's used on a non-threaded perl 2012-04-10 16:26:56 +02:00
Alessandro Ranellucci
fc76104aa7 Merge branch 'boost-geometry' 2012-04-10 15:52:44 +02:00
Alessandro Ranellucci
a8adff53ca New implementation of support material 2012-04-09 22:06:30 +02:00
Alessandro Ranellucci
82a16ed8ee Merge branch 'triffid-duplicate' 2012-04-09 15:14:40 +02:00
Michael Moon
f2edfd1a76 initial implementation of algorithm for #249 
fix typo that put things in the wrong position

use int() builtin instead of POSIX::floor()

fix typo

use alternate method of creating local routines

remove aliases for new duplicate option

use coderefs for linear interpolate function, make binary insertion sort inline

add \n at end of die message regarding too many objects for print area

fix case where no duplication is done

fix whitespace according to slic3r coding style

assume 200x200 bed area if center is 0,0

Some cleanup to the autoarrange duplication logic
 2012-04-09 15:14:07 +02:00
Alessandro Ranellucci
64e669d893 Refactored parallelization code. #154 2012-04-09 13:53:13 +02:00
Alessandro Ranellucci
68b48fa807 Multithreaded mesh processing. #154 2012-04-09 12:29:47 +02:00
Alessandro Ranellucci
5bfe19a8b9 Huge speed Boost (pun intended). Also fixes a problem where infill was escaping perimeters sometimes (#305). 2012-04-09 11:04:32 +02:00
Alessandro Ranellucci
a800b97fdd Bugfix: no-extrusion was ignored 2012-04-08 21:27:38 +02:00
Alessandro Ranellucci
19dc69dd74 New icon 2012-04-07 20:45:59 +02:00
Alessandro Ranellucci
43ebaa9d94 Don't slow down travel moves. #293 2012-04-03 14:22:18 +02:00
Alessandro Ranellucci
965a4e1bfd Make sure all concentric fill loops are extruded ccw. #298 2012-04-03 14:11:12 +02:00
Alessandro Ranellucci
13e573a8e4 Only output M109 if there's none in user-supplied start G-code 2012-04-03 12:50:06 +02:00
Alessandro Ranellucci
0afb5ad9dd Bugfix: some holes were filled. #291 2012-04-02 11:40:12 +02:00
Alessandro Ranellucci
f380b1007d Add the coordinates of the first non-manifold edge to the warning message. #292 2012-03-31 19:15:30 +02:00
Alessandro Ranellucci
d791315b4a Bugfix: fatal error when generating skirt for layers having only two-point thin walls. #295 2012-03-31 18:32:53 +02:00
Alessandro Ranellucci
1355833cbf Use M109 for Makerbot bed control. #294 2012-03-31 18:24:12 +02:00
Alessandro Ranellucci
e3a9adae4d Bugfix: use P instead of S for Mach3 for M106 too. #286 2012-03-27 10:26:10 +02:00
Henrik Brix Andersen
d538382669 Use correct spelling for G-code. 2012-03-26 22:33:43 +02:00
Alessandro Ranellucci
2aa786c95f Bugfix: extrude_skirt() was assuming that a copy existed at 0,0 (not harmful but incorrect) 2012-03-26 19:47:21 +02:00
Alessandro Ranellucci
32c46f0ea3 SVG export 2012-03-26 17:57:54 +02:00
Alessandro Ranellucci
5bd16ffed6 Allow decimal values for skirt/duplicate distances and speeds. #283 2012-03-26 15:20:59 +02:00
Alessandro Ranellucci
4d71ca3071 Enable G0 automatically for Mach3. #266 2012-03-26 12:22:12 +02:00
Alessandro Ranellucci
1a06e35687 New option to specify G-code to be used at layer change. #279 2012-03-26 12:14:15 +02:00
Alessandro Ranellucci
bf964b5273 Allow perimeters = 0. #282 2012-03-26 11:32:59 +02:00
Erkki Seppälä
0ca7577392 Added a Reslicing-function to the File menu. 2012-03-12 19:52:23 +02:00
Alessandro Ranellucci
30df2342d4 UTF-8 characters not displayed correctly on Windows 2012-03-11 19:59:09 +01:00
Alessandro Ranellucci
0f5e2e3076 Throw an error if a user wants to print a 0mm layer 2012-03-11 16:58:15 +01:00
Alessandro Ranellucci
69942d2076 Bugfix: certain values of first layer height ratio caused slicing errors 2012-03-11 16:31:39 +01:00
Alessandro Ranellucci
64892c2203 Bugfix: fatal error on some models. #255 2012-03-10 23:49:24 +01:00
Alessandro Ranellucci
0e1d89376e Minor refactoring 2012-03-04 13:39:14 +01:00
Alessandro Ranellucci
6f9cefe001 Reduce computational complexity of make_loops() => speed boost 2012-03-04 13:32:20 +01:00
Alessandro Ranellucci
3cf5f86ce0 Avoid G92 for Mach3. #220 2012-03-04 11:49:04 +01:00
Alessandro Ranellucci
4a72c77150 Maximize fill/perimeter contact for line infill pattern 2012-03-04 11:45:45 +01:00
Alessandro Ranellucci
be9886eac3 Bugfix: fill escapes perimeters. #139 2012-03-04 11:26:11 +01:00
Alessandro Ranellucci
d0807aa807 Allow to use config options in start/end G-code 2012-03-03 23:29:08 +01:00
Alessandro Ranellucci
f2032686da Ensure fan is turned off at start if disable_fan_first_layers > 0 2012-03-03 23:18:02 +01:00
Alessandro Ranellucci
7892a84408 Refactoring and integrations to the bed temperature handling 2012-03-03 23:14:40 +01:00
Michael Moon
35e7877437 bed temperature handling. TODO: gui elements 2012-03-03 23:08:50 +01:00
Alessandro Ranellucci
8566b4f910 Separate the Slice button a bit 2012-03-03 22:53:12 +01:00
Alessandro Ranellucci
5c79024215 Revert "Made the UI look quite a bit nicer (OS X 10.7 tested)." 
This reverts commit 266f7799dd.

Conflicts:

	lib/Slic3r/GUI/SkeinPanel.pm
 2012-03-03 22:50:08 +01:00
Alessandro Ranellucci
2c16509e8a Slowdown wasn't triggered when fan_below_layer_time was set to zero. #237 2012-03-03 22:28:44 +01:00
Alessandro Ranellucci
06c22c9db3 New --fan-always-on option. #241 #110 2012-03-03 22:21:30 +01:00
Alessandro Ranellucci
c7006fed26 Bugfix: an awful _BRIDGE_FAN_END string was sometimes left in the output. #245 2012-03-03 22:16:38 +01:00
Alessandro Ranellucci
2ff3ab1faf Remove G0 from GUI until a firmware implements it 2012-03-03 21:37:10 +01:00
Alessandro Ranellucci
b5cba48e55 Put the relative E checkbox back in the GUI and disable M82/M83 for MakerBot 2012-03-03 21:27:33 +01:00
Alessandro Ranellucci
e8c64924db Some GUI fixes after the recent contributions 2012-03-03 21:25:26 +01:00
Alessandro Ranellucci
6b31563b70 Merge pull request #236 from sfcgeorge/improved-ui 
Made the UI look quite a bit nicer (OS X 10.7 tested).
 2012-03-03 12:04:35 -08:00
Simon George
266f7799dd Made the UI look quite a bit nicer (OS X 10.7 tested). 
* Added link to website for updates
* Moved 'Slice…' button to the right as this more logically follows the
user's flow through the application
* Moved version information to the middle right under the App name (on
OS X anyway) as it is clearer what the version is referring to
* Added spacing between the buttons
* Removed colon after 'version' as this is the UI convention in about
boxes
* Changed 'Load' to 'Open' as this is the more commonly used term
* Truncated 'Configuration' to 'Config' to save space, and I believe it
is still clear what it means
* Added open and save config to File menu as this is more conventional
location
* Simplified some wording
* Rephrased the tabs to be more succinct, I believe they still make
sense
* Fixed a spelling
* Replaced '…' with proper ellipses character
 2012-02-28 23:04:19 +00:00
Alessandro Ranellucci
f0e434f8c1 Fix typo in previous commit and in config options. #234 2012-02-28 22:04:48 +01:00
Alessandro Ranellucci
0520d1645b Bugfix: retraction wasn't triggered when moving between copies. #232 2012-02-28 21:55:32 +01:00
Henrik Brix Andersen
ca49965210 Fail silently if Growl was stopped after Slic3r was started 2012-02-26 19:44:15 +01:00
Alessandro Ranellucci
9332319e10 Fail silently if Growl::GNTP fails 2012-02-26 19:29:25 +01:00
Alessandro Ranellucci
f451bb2bd0 Use XML::SAX::PurePerl instead of XML::SAX::ExpatXS for now 2012-02-26 18:17:23 +01:00
Alessandro Ranellucci
b9f30d8378 Bugfix: AMF files with no materials were not successfully parsed 2012-02-26 16:22:45 +01:00
Alessandro Ranellucci
79bc2240fb Use first layer temperature for M109 too 2012-02-26 15:09:28 +01:00
Alessandro Ranellucci
dccd7d19a9 First layer temperature. #134 2012-02-26 14:54:38 +01:00
Alessandro Ranellucci
f1f0545209 Bugfix: --extrusion-axis didn't accept an argument 2012-02-26 11:33:58 +01:00
Alessandro Ranellucci
554534fcad Optimization 2012-02-26 11:18:42 +01:00
Alessandro Ranellucci
be0e1a6e0b Bugfix: fill escapes perimeters. However, we keep it disabled. #139 2012-02-25 22:41:53 +01:00
Alessandro Ranellucci
c98f6734c7 Code optimization 2012-02-25 22:18:07 +01:00
Alessandro Ranellucci
170d29a789 New --cooling option and checkbox to enable/disable fan and cooling control 2012-02-25 21:56:36 +01:00
Alessandro Ranellucci
70e69be60a Bugfix: support material was generated under most bridges 2012-02-25 21:39:01 +01:00
Alessandro Ranellucci
1d0a852679 Cooling and fan control. #110 2012-02-25 21:01:00 +01:00
Alessandro Ranellucci
f4fde54bf3 Add extrusion multiplier to gcode comments. #222 2012-02-25 19:24:46 +01:00
Alessandro Ranellucci
9f5e48bd2c Wrong optimization 2012-02-25 17:40:30 +01:00
Alessandro Ranellucci
959230b099 Refactoring: moved Slic3r::STL and Slic3r::AMF to Slic3r::Format::* 2012-02-25 17:35:25 +01:00
Alessandro Ranellucci
2a86932cfe Slight code optimizations 2012-02-25 17:16:55 +01:00
Alessandro Ranellucci
848bf91244 Multithreaded support material generation 2012-02-25 16:51:08 +01:00
Alessandro Ranellucci
044053a3f7 Bugfix: medial axis was not using new Douglas-Peucker implementation 2012-02-25 16:27:33 +01:00
Alessandro Ranellucci
cc695c6c22 Support material: refactoring 2012-02-25 16:23:41 +01:00
Alessandro Ranellucci
a24ffee2aa New polygon_is_convex() function 2012-02-25 16:14:59 +01:00
Alessandro Ranellucci
2d130061ed Increase small holes threshold to holes having a 6.5mm radius 2012-02-25 16:14:28 +01:00
Alessandro Ranellucci
eba7c10018 Faster support generation. Includes a new implementation of the Douglas-Peucker algorithm 2012-02-25 14:46:21 +01:00
Alessandro Ranellucci
94e673e050 Backwards compatibility for people using relative E distances on RepRap firmwares 2012-02-24 23:12:16 +01:00
Alessandro Ranellucci
79aead7c9d Experimental hole compensation 2012-02-24 20:13:17 +01:00
Henrik Brix Andersen
f55a2b91a3 Set Wx application name. 2012-02-23 21:51:45 +01:00
Alessandro Ranellucci
c3fc6ee66b Fix regression introduced with f2e1fe5241 2012-02-21 20:16:03 +01:00
Owen Stenseth
c539a8d9e0 Support skeining multiple files from the command line. Update the status output to include input and export filenames. 2012-02-21 09:26:54 -07:00
Alessandro Ranellucci
aa7a5d6069 Removed warning 2012-02-21 14:31:51 +01:00
Alessandro Ranellucci
f2e1fe5241 Do hole perimeters in ccw direction too 2012-02-21 14:29:58 +01:00
Alessandro Ranellucci
b6bffacb9d Parse and write multi-material AMF files. Convert multiple STL files into a single multi-material AMF 2012-02-20 16:43:45 +01:00
Alessandro Ranellucci
aa98a9deb2 Mark the Slice... button as the default one (just cosmetics) 2012-02-20 12:52:40 +01:00
Alessandro Ranellucci
555c23069d New --post-process option. Includes some cleaning of the STDOUT messages 2012-02-20 12:50:05 +01:00
Alessandro Ranellucci
ae35df716f Little refactoring, new TriangleMesh->align_to_origin method 2012-02-20 11:47:21 +01:00
Alessandro Ranellucci
615bcb27dd New --gcode-flavor option. extrusion_axis, use_relative_e_distances options hidden and implied. #158 2012-02-20 11:44:30 +01:00
Alessandro Ranellucci
23156f0abe Fix slicing error. #180 2012-02-19 17:18:50 +01:00
Alessandro Ranellucci
27a6b3a851 Bugfix: fatal error when medial axis produced poor results. #178 2012-02-19 17:11:18 +01:00
Alessandro Ranellucci
94a2585b97 Dual extruder for support material 2012-02-19 17:02:49 +01:00
Alessandro Ranellucci
375829204f Removed the bogus hole code which is not necessary anymore. Also fixes #160 2012-02-19 16:02:58 +01:00
Alessandro Ranellucci
776d985b26 New AMF-to-STL and STL-to-AMF converters 2012-02-19 15:45:27 +01:00
Alessandro Ranellucci
79ebb13bdb Parse AMF 2012-02-19 15:14:54 +01:00
Alessandro Ranellucci
dba6197935 Failed to remove acceleration from GUI 2012-02-19 12:27:44 +01:00
Alessandro Ranellucci
eb2c24ecfb Removed acceleration from the GUI (too experimental for now) 2012-02-19 12:15:58 +01:00
Alessandro Ranellucci
cf6f303256 Add checkbox for support material in the GUI 2012-02-19 12:08:08 +01:00
Alessandro Ranellucci
7b67fae686 Support material 2012-02-19 12:03:36 +01:00
Alessandro Ranellucci
e0e2023a5a Duplication is now performed on generated toolpaths instead of mesh (speed boost). #179 2012-02-19 10:48:58 +01:00
Alessandro Ranellucci
90c6ed3b20 Merge pull request #209 from henrikbrixandersen/master 
Use SI units consistently.
 2012-02-19 00:34:17 -08:00
Alessandro Ranellucci
4f72de3873 Check that bridge_flow_ratio > 0 2012-02-19 09:32:16 +01:00
Henrik Brix Andersen
c02c2d943c Merge remote-tracking branch 'upstream/master' 2012-02-18 22:42:08 +01:00
Henrik Brix Andersen
c20fd8a596 Use SI units consistently. 2012-02-18 22:36:13 +01:00
Alessandro Ranellucci
a9e7204fc6 New slicing algorithm based on a topological approach rather than numeric. It should be much more robust 2012-02-18 20:36:14 +01:00
Alessandro Ranellucci
16850b63ed Removed some useless and manifoldness warnings 2012-02-17 16:31:39 +01:00
Alessandro Ranellucci
94c1b043e3 Small fix/improvement for the vertex indexing 2012-02-17 14:58:13 +01:00
Alessandro Ranellucci
f814ccf062 Refactoring: use indexed vertices 2012-02-17 13:56:17 +01:00
Henrik Brix Andersen
80bd434e5e Remove last remains of close-after-slicing option. 2012-02-16 22:52:57 +01:00
Alessandro Ranellucci
660eedfa5b Added a couple unit tests 2012-02-15 12:04:10 +01:00
Alessandro Ranellucci
68f001a7de Mark acceleration settings as experimental and add a M501 command at the end of the print if acceleration control is enabled 2012-02-14 21:57:53 +01:00
Alessandro Ranellucci
0deee20ade Bugfix: bad syntax in last commit. #202 2012-02-13 18:02:54 +01:00
Alessandro Ranellucci
dbb40095b7 Bugfix: fatal error when offsetting a surface results in more than one expolygon. #201 2012-02-12 23:44:24 +01:00
Alessandro Ranellucci
ca704c4846 Merge pull request #200 from jreinhardt/master 
Small GUI fix
 2012-02-12 14:35:03 -08:00
Alessandro Ranellucci
419b94e587 Allow Unicode characters in config.ini. #199 2012-02-12 23:33:39 +01:00
Johannes Reinhardt
2b979fb14c added missing units in GUI 2012-02-12 22:42:03 +01:00
Alessandro Ranellucci
74c71b4ef2 Acceleration control. #185 2012-02-10 14:53:44 +01:00
Alessandro Ranellucci
ad8c9d4ea1 Bugfix: model with rounded walls had small useless infill regions. #177 2012-02-10 14:42:54 +01:00
Alessandro Ranellucci
7893480fd7 Add checkbox for G0 in the GUI. #51 2012-02-06 21:17:01 +01:00
Alessandro Ranellucci
ddb0330fc1 Validate configuration before saving from GUI 2012-02-06 16:52:11 +01:00
Henrik Brix Andersen
121895d3fc Add support for notes field in configuration profiles. #130 2012-02-05 20:55:17 +01:00
Henrik Brix Andersen
4dd33c6b05 Ask for confirmation when slicing more than one copy. #165 2012-02-05 16:43:44 +01:00
Henrik Brix Andersen
cc040df42a Do not display the progress dialog as an application-wide modal dialog; modal to the parent window is enough. #189 2012-02-05 14:23:15 +01:00
Henrik Brix Andersen
cec660c263 Fallback on last used config path if no last skein path is set and vice versa. 2012-02-03 20:22:45 +01:00
Henrik Brix Andersen
b4dc299be0 Use separate variables for last used config directory and last used skein directory. #187 2012-02-03 19:57:49 +01:00
Henrik Brix Andersen
35be7f013b Add Growl support. #62 2012-02-03 00:30:35 +01:00
Alessandro Ranellucci
3e65af7457 Revert "New First layer flow ratio option. #182" 
This reverts commit 99ef0865bb.
 2012-01-30 14:51:05 +01:00
Alessandro Ranellucci
99ef0865bb New First layer flow ratio option. #182 2012-01-30 14:25:14 +01:00
Alessandro Ranellucci
eb33c03926 Bugfix: flow wasn't adjusted for first layer according to its height setting. #182 2012-01-30 14:03:12 +01:00
Alessandro Ranellucci
4a9672bd88 Use about 40% less memory 2012-01-28 21:52:31 +01:00
Alessandro Ranellucci
c7b650b001 Require Math::Clipper 1.03 for thread-safety 2012-01-28 16:47:03 +01:00
Alessandro Ranellucci
8b777e9d70 Multithreaded infill. #154 2012-01-28 16:27:52 +01:00
Alessandro Ranellucci
669341cd11 New utility script to split STL plates into individual STL files 2012-01-28 15:05:42 +01:00
Alessandro Ranellucci
2151457d9e Bugfix: small perimeter speed was applied to all holes too, regardless of their size. #175 2012-01-27 14:43:12 +01:00
Alessandro Ranellucci
4ade11b26e Some minor fixes related to polyline refactoring 2012-01-27 14:29:06 +01:00
Alessandro Ranellucci
5bc3f2cfa5 Allow portability of config files between Unix and Windows 2012-01-22 20:10:23 +01:00
Alessandro Ranellucci
debdd164e2 Bugfix: fatal error and warnings removed when cleaning some dirty layers 2012-01-21 18:44:24 +01:00
Alessandro Ranellucci
00c6287488 Bugfix: fill escapes perimeters. #139 2012-01-21 17:11:14 +01:00
Alessandro Ranellucci
a4194554c9 Write single wall width (extrusion width) to the G-code file 2012-01-21 17:02:55 +01:00
Alessandro Ranellucci
331ede52b8 Do all shells for a hole before moving onto the next one. #88 2012-01-21 16:35:33 +01:00
Alessandro Ranellucci
63972a3a35 Some more overlap 2012-01-21 16:35:23 +01:00
Alessandro Ranellucci
7636b67871 Fix comments in Perimeter.pm 2012-01-21 12:00:12 +01:00
Alessandro Ranellucci
f1b1454b36 Loops were not closing well 2012-01-21 11:51:31 +01:00
Alessandro Ranellucci
0e23f20df1 Poor overlap between perimeters and infill 2012-01-21 11:48:03 +01:00
Alessandro Ranellucci
a0ebee2ca3 Warn if no layers were detected 2012-01-21 11:34:03 +01:00
Alessandro Ranellucci
c5b6787a19 Print the number of bogus holes to debug output 2012-01-21 11:24:26 +01:00