bubnikv
4460b5ce50
re-wrote PrintObject::detect_surfaces_type() to C++,
...
Fixed some cracks in the fill surfaces created by rounding all surfaces inside detect_surface_type().
Fixed https://github.com/prusa3d/Slic3r/issues/12
Bridging-Angle not optimal
Extended the "Ensure veritcal wall thickness" mode (merged with the original discover_horizontal_shells function), but this a work in progress. Already Slic3r with "ensure vertical wall thickness" produces less spurious infills inside solids.
2016-11-10 19:23:01 +01:00
bubnikv
22ca927f12
Reworked the bridge detector to allow searching a single bridging
...
direction over multiple regions. This allows a single bridge to be
drawn over holes, which are too close to each other to allow
for separate bridges.
Fixes Bridging-Angle not optimal
https://github.com/prusa3d/Slic3r/issues/12
Re-allowed adaptive infill line width for solid infills. The adaptive
infill line width works in some circumstances, see Issue #15 ,
but the original implementation often changed the line width too
aggressively. The current implementation limits the line width change
to 20%.
Fixes Gaps between infill and perimeter leads to errors in laydown on following layer
https://github.com/prusa3d/Slic3r/issues/15
2016-11-08 09:59:25 +01:00
bubnikv
aac968162b
Unit test to verify whether Slic3r would hang when croaking from
...
a C++ exception handler. This is an unfortunate error in some
Strawberry Perl distributions.
2016-11-06 17:42:36 +01:00
bubnikv
bfb336df0c
Refactored Print::validate() method to not throw an exception, but
...
to return a string with an error message instead. This was necessary
to avoid a hang-up on some Strawberry Perl distributions, when
a perl "croak" function is called after a C++ exception is caught.
2016-11-05 02:23:46 +01:00
bubnikv
6217622865
Hopefully a fix of https://github.com/prusa3d/Slic3r/issues/11
...
Replaced eval { die } construct with a bool return value indicating
success or failure of an automatic arrangement of parts on the print bed.
Don't know exactly what is happening here, but throwing a "die" inside
a XS function and then catching it inside an eval {} block is suspcious.
2016-11-04 15:03:51 +01:00
bubnikv
483a658144
Method ExtrusionEntity::polygons_covered() and derived were split
...
into polygons_covered_by_width() and polygons_covered_by_spacing().
Bugfix of ExtrusionLoop::split_at(const Point &point),
where the split ExtrusionPaths were not initialised correctly.
2016-11-04 00:10:35 +01:00
bubnikv
7b6b609df1
ExtrusionEntity and derived classes: Documented, short methods made
...
inline for efficiency and readability, grow() renamed to polygons_covered().
2016-11-03 10:24:32 +01:00
bubnikv
95ede7c4b8
Rewrote Fill2.pm to C++, deleted Perl infills for good.
...
Removed dependency on Perl Math::PlanePath module.
Fixed compilation with Visual Studio and SLIC3R_DEBUG: Visual Studio older than 2015 does not support the prinf type specifier %zu. Use %Iu instead.
C++11 move semantics enabled.
2016-11-02 10:47:00 +01:00
bubnikv
4e66ed81d2
Fixed the fill density for rectilinear, triangular and cubic infills.
...
Initial implementation of the "infill link maximum distance" feature.
Parts of the perimeter connecting two infill lines will be dropped,
if longer than a given threshold.
2016-10-27 17:03:57 +02:00
bubnikv
4524ecf66b
by alexrj: Always convert strings to UTF-8 before passing them to XS
2016-10-24 14:08:22 +02:00
bubnikv
1fb57e439e
Defined the +-* operators on Pointf.
...
Removed the deprecated VibrationLimit feature.
Added triangle infill.
The Prusa3D fork of Slic3r has been marked as "Slic3r Prusa Edition"
with menus pointing to the prusa3d/slic3r github release page
and Prusa3D drivers downloads page.
2016-10-21 16:53:42 +02:00
bubnikv
15d3e94a66
Unified the creation of paths of debugging output files
...
pointing to a predefined output directory.
2016-10-21 10:18:01 +02:00
bubnikv
f788f50b5a
Disabled asserts in the release build (-DNDEBUG).
...
Added a safe variant of offset(const Slic3r::ExPolygon...), which offsets each loop separately.
New functions "remove_sticks" to remove zero area parts of polygons.
New functions "remove_small" and "remove_degenerate" for polygon clean up.
Extended the C++ supports, those are not finalized yet though.
2016-10-20 13:04:23 +02:00
bubnikv
53907a9cfe
Fix of a crash when setting a viewport over an empty platter.
...
Exported bounding box 'empty' method to perl.
2016-10-18 16:44:05 +02:00
bubnikv
7d7f093120
C++ supports sketched, but not finalized yet. Slic3r is still using
...
the old Perl supports, but this time with the C++ fillers.
2016-10-16 16:30:56 +02:00
bubnikv
3a81e6bee4
Bugfix of bottom bridges. If close regions shall be closed by bridges,
...
these regions are grown to anchor the bridge lines to the bottom surface.
The grown regions may overlap. In that case the regions are now merged
before the bridging direction is calculated for the merged region.
2016-09-30 15:23:18 +02:00
bubnikv
403329db49
Misc bugfixes.
2016-09-26 13:58:47 +02:00
bubnikv
790b640521
Visualization of fill surfaces.
2016-09-26 13:56:24 +02:00
bubnikv
e0d1aa8a1a
Collect the perimeter surfaces when generating perimeters.
...
The perimeter surfaces are later used for performing infill
below overhangs and to maintan configured vertical wall thickness
at sloping surfaces.
2016-09-26 13:44:23 +02:00
bubnikv
620c6c7378
Ported from the playground branch. Various documentation and optimization.
2016-09-13 13:30:00 +02:00
bubnikv
f518e0675c
Initial commit of the new Pressure Equalizer, the EdgeGrid
...
signed distance field structure.
The EdgeGrid is used to avoid placing the seams on overhangs.
2016-09-12 16:25:15 +02:00
bubnikv
9fcc8fe9ae
Meged with release_candidate_1_3
2016-09-12 11:29:39 +02:00
Alessandro Ranellucci
9e8022f6f6
More refactoring to medial axis and gap fill, more robust
2016-05-20 17:03:57 +02:00
Vojtech Bubnik
d022493297
Merge remote-tracking branch 'upstream/master'
2016-05-03 22:05:31 +02:00
bubnikv
f767ce816b
Optimized and improved rectilinear fill.
2016-04-13 20:45:44 +02:00
Chow Loong Jin
3d73fbf5fd
Use float for elapsed_time
...
When accumulating elapsed_time from many moves that take less than 1
second, elapsed_time does not get incremented because (unsigned int)0.9
= 0.
2016-04-13 01:13:42 +08:00
bubnikv
ed83ff37f8
Simulation of extrusion in a plane, useful for finding out under / over-extruions.
2016-04-11 17:10:13 +02:00
bubnikv
9716ee8eca
Interface to a filler, ported from Perl to C++.
2016-04-11 17:09:15 +02:00
bubnikv
7da68c91a5
Vojtech likes to use Sublime on Windows to get the wheels rolling.
2016-04-11 17:05:58 +02:00
Alessandro Ranellucci
660b56acb5
Fixed type error
2016-03-26 12:21:54 +01:00
Alessandro Ranellucci
7c8b71012c
Force the 'nearest' strategy for starting skirt loops
2015-12-21 15:02:39 +01:00
Alessandro Ranellucci
934bd43e35
More refactoring on Config XS bindings
2015-12-16 12:58:06 +01:00
Alessandro Ranellucci
3c862836f2
Refactored the Config XS bindings
2015-12-16 12:33:19 +01:00
Alessandro Ranellucci
e2f2761a00
One more fix for compilation
2015-12-08 11:07:45 +01:00
Alessandro Ranellucci
4913e90e10
Remove any Perl related code from libslic3r
2015-12-08 00:39:54 +01:00
Alessandro Ranellucci
3fac8cd77e
Large refactoring of the Config classes
2015-12-07 19:39:49 +01:00
Alessandro Ranellucci
7e1fac8f76
Separate libslic3r code from slic3r application code
2015-12-06 12:54:01 +01:00
Alessandro Ranellucci
e2b203ba8d
Disable screensaver while projecting (untested on Windows)
2015-12-04 21:25:45 +01:00
Alessandro Ranellucci
7523550066
Try to fix compilation on older Perls
2015-12-02 19:57:03 +01:00
Alessandro Ranellucci
1bebe6097b
Make test happy
2015-12-02 19:39:16 +01:00
Alessandro Ranellucci
4f8a18bbad
Ported Layer::maker_perimeters() to XS
2015-12-02 19:32:57 +01:00
Alessandro Ranellucci
3a9cf91f83
Ported a couple more methods to XS
2015-12-02 18:29:33 +01:00
Alessandro Ranellucci
ed75219215
Ported mode Model methods to XS
2015-12-02 18:06:18 +01:00
Alessandro Ranellucci
dfce3a3138
Ported _arrange() and arrange_object() to XS
2015-12-01 21:51:16 +01:00
Alessandro Ranellucci
9febb10bd7
Smoother manual control movements
2015-11-08 10:20:47 +01:00
Alessandro Ranellucci
9a8724cdd0
More compilation changes for Win32
2015-11-06 11:51:24 +01:00
Alessandro Ranellucci
9f9b5afedb
Merge branch 'master' into sender
2015-11-05 11:04:01 +01:00
Alessandro Ranellucci
61f0a9e4da
Replace the flip word with mirror. #3060
2015-11-04 23:11:30 +01:00
Alessandro Ranellucci
f8d2c69713
Fixed compilation warnings and a potential bug in MotionPlanner, as reported in #3054
2015-11-04 20:50:32 +01:00
Alessandro Ranellucci
9ee6829ebc
Implemented connection timeout in C++
2015-11-02 20:36:36 +01:00
Alessandro Ranellucci
fc1a7471cf
Several improvements to the print job queue
2015-11-02 01:18:05 +01:00
Alessandro Ranellucci
9b21ac877a
Merge branch 'master' into sender
...
Conflicts:
Build.PL
lib/Slic3r.pm
xs/MANIFEST
xs/src/libslic3r/PrintConfig.hpp
2015-11-01 19:12:13 +01:00
Alessandro Ranellucci
9fcec10737
Finished porting LayerRegion to C++
2015-10-26 23:24:46 +01:00
Alessandro Ranellucci
6ac79e3ed6
Ported make_perimeters() to C++
2015-07-23 16:27:21 +02:00
Alessandro Ranellucci
b4515cf695
Finished porting PerimeterGenerator to C++
2015-07-23 15:53:02 +02:00
Alessandro Ranellucci
3e739b87da
Finished porting Slic3r::GCode to XS (speed boost!)
2015-07-02 20:24:16 +02:00
Alessandro Ranellucci
0ad4296aaf
Ported GCode::set_extruders() and GCode::change_layer() to XS
2015-07-02 19:33:08 +02:00
Alessandro Ranellucci
9a17efc480
Use GCodeWriter for path segments (refactoring)
2015-07-02 19:14:55 +02:00
Alessandro Ranellucci
fbd640fdc5
Ported GCode::extrude_path() to XS (speed boost!)
2015-07-02 18:57:40 +02:00
Alessandro Ranellucci
b025efe729
Ported GCode::travel_to() to XS
2015-07-02 15:12:04 +02:00
Alessandro Ranellucci
a6f4c8e567
Ported GCode::set_extruder() and OozePrevention
2015-07-02 15:02:20 +02:00
Alessandro Ranellucci
b14290b9f6
Make tests happy
2015-07-02 14:29:20 +02:00
Alessandro Ranellucci
5571144c0e
Ported Slic3r::GCode::needs_retraction() to XS
2015-07-01 23:14:40 +02:00
Alessandro Ranellucci
b4019bb438
Ported more Slic3r::GCode methods to XS
2015-07-01 23:00:52 +02:00
Alessandro Ranellucci
801f629fdc
Ported Slic3r::GCode storage to XS
2015-07-01 21:47:17 +02:00
Alessandro Ranellucci
280f3f38d7
Ported Slic3r::GCode::OozePrevention storage to XS
2015-07-01 21:01:42 +02:00
Alessandro Ranellucci
b43dd92766
Ported Slic3r::GCode::Wipe storage to XS
2015-07-01 20:57:16 +02:00
Alessandro Ranellucci
bf9cd1b8e6
Ported Slic3r::GCode::AvoidCrossingPerimeters to XS
2015-07-01 20:14:05 +02:00
Alessandro Ranellucci
580d28d071
Finished porting PlaceholderParser to XS
2015-07-01 19:35:22 +02:00
Alessandro Ranellucci
249088b4f8
Ported Config::setenv() to XS
2015-07-01 18:18:25 +02:00
Alessandro Ranellucci
f361d8ad43
Ported PlaceholderParser::apply_env_variables() to XS
2015-07-01 17:56:38 +02:00
Alessandro Ranellucci
7f70da97b4
New experimental autospeed feature. #2810
2015-05-31 22:04:32 +02:00
Alessandro Ranellucci
13b7316807
Merge branch 'master' into sender
...
Conflicts:
Build.PL
lib/Slic3r/GUI/MainFrame.pm
2015-05-28 18:05:36 +02:00
Alessandro Ranellucci
7d81aee62f
Added the [scale] placeholder. #2791
2015-05-02 21:59:15 +02:00
Alessandro Ranellucci
d6d7880507
Ported Slic3r::Geometry::arrange() to C++/XS
2015-04-29 19:19:07 +02:00
Alessandro Ranellucci
5eb3bc52ef
Ported ModelObject::rotate() and ModelObject::flip() to XS, as well as axes constants
2015-04-16 21:22:04 +02:00
Alessandro Ranellucci
be2f46ca68
Ported Layer::merge_slices() to XS
2015-04-16 20:44:55 +02:00
Alessandro Ranellucci
1f8ef2a63c
Fixed regression introduced by the recent PerimeterGenerator refactoring causing spiral vase not to be correctly skipped on multi-loop layers. Includes regression test. #2761
2015-04-12 20:16:27 +02:00
Alessandro Ranellucci
8654537e55
Use support material layer height for raft layer instead of object layer height. #2723
2015-03-09 19:36:23 +01:00
Alessandro Ranellucci
d8ee9dd5f5
Limit first object layer height correctly when using a larger support material extruder. #2722
2015-03-09 19:27:57 +01:00
Alessandro Ranellucci
6cab5668e3
Restore correct ordering of concentric infill loops, preventing them from being reordered during G-code generation
2015-03-09 18:28:07 +01:00
Alessandro Ranellucci
d2172b4383
Merge branch 'master' into sender
2015-03-06 22:15:43 +01:00
Alessandro Ranellucci
722e94513c
Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled
2015-03-06 09:56:58 +01:00
Alessandro Ranellucci
ba6ae12635
Change end_program() to postamble()
2015-02-15 17:09:17 +01:00
Alexander Rössler
f2fa8cb63f
added end_program() function to GCodeWriter
2015-02-07 12:36:29 +01:00
Alessandro Ranellucci
3ae6f2630e
Merge branch 'master' into sender
...
Conflicts:
Build.PL
2015-02-01 14:07:32 +01:00
Alessandro Ranellucci
bb3bf28e59
Ported prepare_fill_surfaces() to XS/C++
2015-02-01 12:43:58 +01:00
Alessandro Ranellucci
8605969dc5
Don't output slic3r:z attribute in SVG for raft layers
2015-01-30 18:45:30 +01:00
Alessandro Ranellucci
e2b1b52679
Added a new Slic3r::Geometry::simplify_polygons() function
2015-01-30 18:33:20 +01:00
Alessandro Ranellucci
c264969962
Bugfix: crash when rendering lines with zero length in 3D preview. #2569
2015-01-25 15:21:45 +01:00
Alessandro Ranellucci
a5c0ffe963
Faster loading of 3D preview and much less memory used
2015-01-24 23:35:29 +01:00
Alessandro Ranellucci
8791f5a493
Cleanup of some method signatures and of XS return types
2015-01-19 18:53:04 +01:00
Alessandro Ranellucci
9f0283f808
Minor issue when dealing with files with empty layers at bottom. #2553
2015-01-18 12:35:05 +01:00
Alessandro Ranellucci
2bbb6c570b
Ported toolpaths rendering to C++
2015-01-18 01:07:22 +01:00
Alessandro Ranellucci
e749f6040f
New +Line::intersection_infinite() method
2015-01-16 16:25:39 +01:00
Alessandro Ranellucci
e0a3d2577c
Initial work for 3D rendering of toolpaths
2015-01-15 20:06:30 +01:00
Alessandro Ranellucci
18e815d032
More efficient 3D preview of slices
2015-01-15 18:49:07 +01:00
Alessandro Ranellucci
bf02062a67
Bugfix: random but frequent crashes after recent perimeter code refactoring
2015-01-14 22:55:11 +01:00
Alessandro Ranellucci
04aa240265
Only apply perimeter/infill overlap to the endpoints of rectilinear infill (and do that in a more proper way)
2015-01-13 20:55:20 +01:00
Alessandro Ranellucci
9ec7b43ca1
Merge branch 'master' into sender
...
Conflicts:
lib/Slic3r/GUI/Tab.pm
2015-01-08 22:47:43 +01:00
Alessandro Ranellucci
8f4cbefd0d
Lots of improvements to MotionPlanner/avoid_crossing_perimeters. Smoother paths and several edge cases now handled better
2015-01-06 20:52:36 +01:00
Alessandro Ranellucci
2562070232
Refactored the travel/retract/avoid_crossing_perimeters logic. Several edge cases are now handled correctly. #2498
2015-01-06 14:52:03 +01:00
Alessandro Ranellucci
7e82159620
Fixed one more case where only_retract_when_crossing_perimeters didn't apply. #2498
2015-01-06 11:29:34 +01:00
Alessandro Ranellucci
9af43bee52
Handle log, temperatures. Move controller to main tabpanel. More things
2015-01-04 23:18:23 +01:00
Alessandro Ranellucci
3ab4d4b094
Merge branch 'master' into sender
2015-01-04 19:36:28 +01:00
Alessandro Ranellucci
16939b80e6
Implemented priority queue
2015-01-04 18:17:15 +01:00
Alessandro Ranellucci
2c0d216c1a
More work on print controller
2015-01-03 23:25:55 +01:00
Alessandro Ranellucci
d8be67c28b
Bugfix: Douglas-Peucker used perpendicular distance instead of shortest distance, thus clipping more than it should. #2474
2015-01-03 15:03:53 +01:00
Alessandro Ranellucci
c06ce3b58c
Initial work for a controller GUI
2014-12-31 19:10:46 +01:00
Alessandro Ranellucci
29d64107de
Merge branch 'master' into sender
2014-12-31 16:25:26 +01:00
Alessandro Ranellucci
494efe65b2
Bugfix: auto-center didn't update the PrintObject copies properly, causing misalignment. #2464
2014-12-29 22:29:24 +01:00
Alessandro Ranellucci
b126f92f41
Finished GCodeSender
2014-12-27 22:58:01 +01:00
Alessandro Ranellucci
005f138ce7
Merge branch 'master' into sender
2014-12-26 01:30:48 +01:00
Alessandro Ranellucci
70601eeb51
Tell what options were changed when prompting user for saving a modified preset. Also, check whether the preset was actually modified by performing a proper idempotent diff. #2165
2014-12-25 17:35:31 +01:00
Alessandro Ranellucci
5a0f4eac8d
One more retraction optimization
2014-12-25 11:37:54 +01:00
Alessandro Ranellucci
4848cb7606
Ported PrintObject::bridge_over_infill() to XS
2014-12-24 10:20:55 +01:00
Alessandro Ranellucci
5d3cd792eb
Make infill_only_where_needed idempotent. #2198
2014-12-24 01:29:36 +01:00
Alessandro Ranellucci
93507bfd49
Bugfix: only_retract_when_crossing_perimeters was not correctly applied on bottom layer when no bottom solid layers were printed
2014-12-22 11:46:16 +01:00
Alessandro Ranellucci
7253dc699a
Some more work on wireframe
2014-12-21 22:52:18 +01:00
Alessandro Ranellucci
21ea100d0e
Fixed tests
2014-12-17 01:15:47 +01:00
Alessandro Ranellucci
9264db7ecd
Removed useless thing added in e79aa2e81c
2014-12-17 00:52:01 +01:00
Alessandro Ranellucci
c00061678b
Use perimeter extruder for brim. #618
2014-12-17 00:45:05 +01:00
Alessandro Ranellucci
e79aa2e81c
New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618
2014-12-17 00:34:00 +01:00
Alessandro Ranellucci
fcfb3b98bc
3D object positioning
2014-12-16 01:12:56 +01:00
Alessandro Ranellucci
a82f95e903
Some initial work for 3D slice rendering
2014-12-15 15:19:42 +01:00
Alessandro Ranellucci
9cd0a63331
Refactoring of PreviewCanvas
2014-12-15 01:28:11 +01:00
Alessandro Ranellucci
2f2ae75529
Some incomplete work for moving objects in 3D plater
2014-12-13 22:18:43 +01:00
Alessandro Ranellucci
d1f58cbed5
Objects can be selected in 3D preview now. Double click and right click work as well
2014-12-13 20:41:03 +01:00
Alessandro Ranellucci
ac495e974a
Update test
2014-12-12 23:02:28 +01:00
Alessandro Ranellucci
360dee862b
Keep model objects aligned to Z = 0 in plater
2014-12-12 22:43:56 +01:00
Alessandro Ranellucci
050f9ff61a
Removed two useless methods in Print
2014-12-12 22:43:56 +01:00
Alessandro Ranellucci
e8ab9ac13a
Ported Print::bounding_box(), Print::total_bounding_box(), Print::skirt_flow(), Print:skirt_first_layer_height() to XS
2014-12-12 22:43:56 +01:00
Alessandro Ranellucci
c8596c5c58
Limit "Only retract when crossing perimeters" so that retraction is triggered also when crossing the boundaries of a single region. #2298
2014-12-09 01:08:58 +01:00
Alessandro Ranellucci
eb23990d6d
Ported PrintObject::total_layer_count() to XS
2014-12-01 00:00:12 +01:00
Alessandro Ranellucci
c7f5753a28
Ported PrintObject::bounding_box() to XS
2014-12-01 00:00:12 +01:00
Alessandro Ranellucci
1fda9e3d50
Ported concave_points() and convex_points() to XS
2014-12-01 00:00:12 +01:00
Alessandro Ranellucci
e8f242ee3f
Move toolpaths preview to the plater dialog
2014-12-01 00:00:11 +01:00
Alessandro Ranellucci
11dd67ab34
Initial work for G-code sender and more intensive usage of Boost
2014-11-26 22:30:25 +01:00
Alessandro Ranellucci
634bc09e2c
Refactoring: renamed all contains_*() methods to contains() in C++
2014-11-23 20:14:13 +01:00
Alessandro Ranellucci
5deadc8f12
Refactoring: removed _islands members in Slic3r::GCode
2014-11-23 20:03:16 +01:00
Alessandro Ranellucci
2c64c3dd5b
Bugfix: spiral vase was not working when extrusion axis was not E. #2350
2014-11-23 18:59:18 +01:00
Alessandro Ranellucci
6010297465
All std::string variables are now supposed to be UTF-8 encoded. We now embed the std::string typemaps in order to do this. #2282
2014-11-22 22:20:28 +01:00
Alessandro Ranellucci
bf0eb1af0c
Refactored ClipperUtils API for a more consistent arguments convention
2014-11-15 23:44:03 +01:00
Alessandro Ranellucci
28466750e6
Ported some minor methods to XS
2014-11-15 23:06:15 +01:00
Alessandro Ranellucci
379cde30e2
Ported Slic3r::BridgeDetector to XS
2014-11-15 22:41:22 +01:00
Alessandro Ranellucci
33fe53fd7c
Ported three PrintObject methods to XS
2014-11-13 00:34:56 +01:00
Alessandro Ranellucci
a5df9fb795
Ported ModelObject::split() to XS
2014-11-12 23:50:09 +01:00
Alessandro Ranellucci
334086d605
Bugfix: skirt and brim were not recalculated when objects where just moved in plater
2014-11-12 23:28:42 +01:00
Alessandro Ranellucci
a5787cfb04
Merge branch 'xs-reload-object'
...
Conflicts:
lib/Slic3r/Print.pm
2014-11-12 22:51:48 +01:00
Alessandro Ranellucci
8b6a8e6307
Ported PlaceholderParser::update_timestamp() to XS
...
Note that Slic3r version number is now located in libslic3r.h
2014-11-09 20:41:43 +01:00
Alessandro Ranellucci
ee3fb7caa2
Ported GCodeWriter to XS (faster G-code export!)
2014-11-09 19:02:45 +01:00
Alessandro Ranellucci
b69caff93c
Ported LayerRegion::make_slices() to XS
2014-11-09 16:24:07 +01:00
Alessandro Ranellucci
948793e570
Prettier validation errors
2014-11-09 15:31:40 +01:00
Alessandro Ranellucci
bad0bd8520
Ported Print::validate() to XS
2014-11-09 15:27:34 +01:00
Alessandro Ranellucci
3e4c572164
Ported some methods including add_model_object() and apply_config() to XS
2014-11-09 12:25:59 +01:00
Alessandro Ranellucci
c97cac5bc9
Fixed glitch in commit 9c93e52c8f
causing tests failures
2014-11-08 15:02:58 +01:00
Alessandro Ranellucci
9c93e52c8f
Workaround Clipper changing point coordinates while performing simplify_polygons(), thus causing a crash in Slic3r. #2306
2014-11-08 12:56:14 +01:00
Alessandro Ranellucci
67f1cdf76f
Bugfix: seam_position = random didn't work with a single perimeter. #2179
2014-11-07 23:53:18 +01:00
Alessandro Ranellucci
d645dabcff
Ported reload_object() to XS
2014-11-07 20:25:05 +01:00
Alessandro Ranellucci
7f57f007cd
Refactoring: moved Slic3r::GCode::Base to Slic3r::GCode::Writer
2014-10-25 10:42:07 +02:00
Alessandro Ranellucci
71ec90a1dd
Finish porting the Extruder class to libslic3r
2014-10-21 20:36:52 +02:00
Alessandro Ranellucci
f82e92f498
Merge branch 'gcode-refactoring'
2014-10-21 20:20:28 +02:00
Alessandro Ranellucci
167df0ab87
Refactoring: moved most of the low-level G-code to the Slic3r::GCode::Base class. Cleanup of the retraction and wipe logic.
2014-10-21 20:16:45 +02:00
Alessandro Ranellucci
e521475b7e
Refactoring: moved some low-level G-code generation methods to the new Slic3r::GCode::Base class
2014-10-18 17:41:21 +02:00
Alessandro Ranellucci
6b8f03ff1c
Bugfix: crash in some circumstances when avoid_crossing_perimeters is enabled. #2266
2014-10-15 00:59:26 +02:00
Alessandro Ranellucci
73b3c06361
Ported more things to XS
2014-09-21 10:51:36 +02:00
Alessandro Ranellucci
5a96bad8c2
Ported some more methods to C++
2014-08-08 21:48:59 +02:00
Alessandro Ranellucci
b10917806a
Ported some Model methods to XS
2014-08-03 20:33:16 +02:00
Alessandro Ranellucci
6adc3477c9
Moved C++ code into new libslic3r directory
2014-08-03 19:42:29 +02:00
Alessandro Ranellucci
7ff13c063f
Port PrintRegion::flow() and LayerRegion.flow() to XS
2014-08-03 19:17:23 +02:00
Alessandro Ranellucci
380dd8adfc
Ported some methods to XS
2014-08-03 18:41:09 +02:00
Alessandro Ranellucci
30fa055995
Bugfix: medial axis missed some segments. #2144
2014-08-03 15:03:47 +02:00
Alessandro Ranellucci
f462af20f9
Visual preview for bed shape dialog
2014-08-03 00:20:55 +02:00
Alessandro Ranellucci
3ff613d166
Merge branch 'acp-voronoi'
...
Conflicts:
xs/xsp/my.map
2014-07-26 22:38:35 +02:00
Alessandro Ranellucci
86bad17abb
Display skirt and brim in toolpaths preview. Also take support material margin into account when sizing the window. #2169
2014-07-24 18:32:07 +02:00
Alessandro Ranellucci
d9f5fdae72
Bugfix: make_perimeters() was not truly idempotent because prepare_infill() split ->slices into typed surfaces
2014-07-15 19:07:38 +02:00
Alessandro Ranellucci
da4d6cbabb
3D preview of plater
2014-07-13 12:10:34 +02:00
Alessandro Ranellucci
aacc01a56f
Store object and volume names in the new 'name' property instead of relying on material id
2014-07-12 11:20:57 +02:00
Alessandro Ranellucci
f82a8475a1
Use AMF object and volume metadata for handling per-object and per-volume settings
2014-07-11 20:09:01 +02:00
Alessandro Ranellucci
d9dc2fda00
Fixed regression causing variable layer heights to be ignored. #2136
...
Conflicts:
xs/xsp/my.map
2014-07-01 19:49:15 +02:00
Alessandro Ranellucci
67bf99633e
Fix compilation under 5.20 (untested). #2109
2014-06-25 14:57:06 +02:00
Alessandro Ranellucci
b9e8fbacb7
Put the Default Extruder option in a less confusing position
2014-06-19 20:07:16 +02:00
Alessandro Ranellucci
4bf23c67bb
Bugfix: wrong input validation in set_layer_height_ranges(). #2105
2014-06-19 14:44:50 +02:00
Alessandro Ranellucci
998a4225de
Finished implementation of bed_shape in plater
2014-06-16 15:18:39 +02:00
Alessandro Ranellucci
04ed3abd3f
Fix compilation on 5.18(?)
2014-06-14 23:12:03 +02:00
Alessandro Ranellucci
e9910a2c0b
XYZ mirroring from plater
2014-06-14 21:14:33 +02:00
Y. Sapir
a837e26f51
Translate PlaceholderParser::apply_config to C++.
2014-06-14 00:01:52 +02:00
Alessandro Ranellucci
d9e7a50a6e
Partial work for background processing
2014-06-13 11:19:53 +02:00
Alessandro Ranellucci
97231327e0
Have Print::apply_config() return true if any step was invalidated
2014-06-12 09:29:26 +02:00
Alessandro Ranellucci
6194cbf530
Refactoring: new method in Flow for calculating spacing between extrusions having different width
2014-06-12 09:17:37 +02:00
Alessandro Ranellucci
8ee11b3239
Refactoring: keep height in Flow object and calculate spacing on demand
2014-06-12 01:00:13 +02:00
Alessandro Ranellucci
5dcc1eab79
Bugfix: seam_position = aligned failed in certaim circumstances because of faulty concave points detection. Includes regression test
2014-06-11 21:58:41 +02:00
Alessandro Ranellucci
d2ca4c1b13
Some initial work for incremental slicing
2014-06-11 00:15:02 +02:00
Alessandro Ranellucci
5c54acf9ac
Use ->ptr() for CoolingBuffer too
2014-06-10 16:17:34 +02:00
Alessandro Ranellucci
3f6360ee8f
Finish porting Print classes to XS
2014-06-10 16:01:57 +02:00
Alessandro Ranellucci
ba8148f4ad
Merge branch 'printcpp' of github.com:sapir/Slic3r into sapir-printcpp
...
Conflicts:
lib/Slic3r/GCode.pm
lib/Slic3r/Print.pm
lib/Slic3r/Print/Object.pm
lib/Slic3r/Print/Region.pm
2014-06-10 14:46:40 +02:00
Alessandro Ranellucci
3599bd0bae
Distinct extrusion width for external perimeters
2014-06-09 21:22:15 +02:00
Alessandro Ranellucci
7215e66a6a
Merge branch 'master' into visilibity
...
Conflicts:
lib/Slic3r/GCode.pm
xs/MANIFEST
2014-05-27 00:04:53 +02:00
Alessandro Ranellucci
b02e459c4b
Attempt to fix compilation issue
2014-05-26 17:13:24 +02:00
Alessandro Ranellucci
3d25b9030c
Bugfix: movement between objects in sequential printing mode was going too far away. #2013 #2007
2014-05-26 15:19:13 +02:00
Y. Sapir
19d18bdd84
Attempt to solve conflict with a3bd1b5
by adding id to PrintObject and using that as a hash key.
2014-05-25 03:00:29 +03:00
Y. Sapir
9247f21ff8
Add missing include "BoundingBox.hpp" to Polygon.xsp.
2014-05-25 00:55:13 +03:00
Y. Sapir
d2e51242d9
Really fix total_used_filament / total_extruded_volume.
2014-05-25 00:53:47 +03:00
Y. Sapir
07dd799967
Fix inherited Layer::Support id and object accessors.
2014-05-25 00:50:49 +03:00
Y. Sapir
b8b8c746d9
Make clear_regions and delete_region methods private (both Print & Layer), and remove from XSP.
2014-05-25 00:11:17 +03:00
Y. Sapir
22b05cb187
Make read-only constructor parameters - private.
2014-05-24 23:50:45 +03:00
Y. Sapir
76738dc66b
Remove some more Clone typemaps and add some whitespace.
2014-05-24 23:50:45 +03:00
Y. Sapir
db51e4693d
Return NULL values from XS as undef.
2014-05-24 23:50:45 +03:00
Y. Sapir
d06c300926
Add ::Ref classes for every missing C++ class (going by REGISTER_CLASS calls).
2014-05-24 23:50:44 +03:00
Y. Sapir
8da0bded1d
Move Print object storage to C++. (along with its subobjects)
2014-05-24 23:50:29 +03:00
Alessandro Ranellucci
a3bd1b5302
New seal_position option that replaces randomize_start, start_perimeters_at_concave_points and start_perimeters_at_non_overhang. The two latter options are now always on by default. A new "Aligned" seal position value has been added, that forces starting points to be aligned when not randomized. #1741 #925
2014-05-22 19:34:49 +02:00
Alessandro Ranellucci
f2c5e799b1
Enforce seam alignment and blend in spiral vase. #2023
2014-05-22 12:28:12 +02:00
Alessandro Ranellucci
254ab29a97
New Point::projection_onto() methods
2014-05-21 20:08:21 +02:00
Alessandro Ranellucci
ad99b2a0fd
Fixed one more regression introduced with Model refactoring. Includes regression test
2014-05-15 16:37:18 +02:00
Alessandro Ranellucci
5fe5021fd7
Implemented avoid_crossing_perimeters with VisiLibity
2014-05-13 20:06:01 +02:00
Alessandro Ranellucci
ee2c1c6127
Refactored the Slic3r::GCode logic for speeds
2014-05-13 08:34:21 +02:00
Alessandro Ranellucci
59f0e76da1
Distinct extrusion role for support material interface
2014-05-12 22:59:49 +02:00
Alessandro Ranellucci
69002b8ea2
No tests were covering randomize-start, which was not working anymore after recent ExtrusionLoop refactoring. #2028
2014-05-12 21:49:17 +02:00
Alessandro Ranellucci
27c73f5983
Some fixes after the recent Model refactoring
2014-05-10 16:59:17 +02:00
Alessandro Ranellucci
7ba08c90cf
Refactoring to Model API for making it stricter and safer
2014-05-09 14:24:35 +02:00
Alessandro Ranellucci
76a8ec3d9e
Replace to_SV_ref() and to_SV_clone_ref() with templated glue functions
2014-05-08 14:52:48 +02:00
Alessandro Ranellucci
6e207d3830
Merge branch 'sapir-modelcpp'
2014-05-08 11:13:21 +02:00
Alessandro Ranellucci
c37ef2f18b
New semantics for ExtrusionLoop objects. Early processing of perimeter overhangs for paralellizing such work and making G-code export lighter. Lots of refactoring. This should fix a number of minor bugs, including reversals of perimeter overhangs.
2014-05-08 11:07:37 +02:00
Alessandro Ranellucci
d2d885fc53
Turn ExtrusionLoop into a collection of polylines. Includes some changes to the Polygon API to avoid returning newly allocatd objects
2014-05-07 12:02:09 +02:00
Alessandro Ranellucci
13af16ea24
Use Pointf for origin_translation and pass const refs whenever possible
2014-05-07 00:58:29 +02:00
Alessandro Ranellucci
54a199919b
Removed StringMap
2014-05-07 00:22:56 +02:00
Y. Sapir
05b2993769
Translate Model class' storage to C++.
...
Some code copied from xs-model branch.
Also:
* Generate ::Ref classes programatically.
* Add separate __REGISTER_CLASS macro
(for use where forward declaration won't work, i.e. typedefs)
2014-05-05 16:30:19 +03:00
Alessandro Ranellucci
cb1527f7ef
Refactoring: move direction math into a single function. Includes some fixes and adjustments
2014-05-02 18:48:11 +02:00
Petr Ledvina
028ef3a868
Add missing perlglue.hpp to xsp files
...
perlglue was missing in some xsp files. If file ordering ib XS.c is changed, header file could be missing. Maybe solves #2000
2014-05-02 14:08:44 +02:00
Alessandro Ranellucci
0a88492fdc
Use a more robust parallelism detection
2014-05-02 13:26:59 +02:00
Alessandro Ranellucci
c81ffc391d
Tentative fix for unreproduced compilation error reported
2014-05-02 11:51:07 +02:00
Alessandro Ranellucci
60f640f100
Remove self-intersections before supplying polygon data to polyPartition and rename triangulate2() to triangulate_pp()
2014-05-01 10:37:38 +02:00
Alessandro Ranellucci
98e40d3fe4
Store width and height in ExtrusionEntity objects for debugging purposes
2014-04-29 23:16:16 +02:00
Alessandro Ranellucci
24571612c7
Some minor changes to the newly-ported Extruder class
2014-04-28 22:02:34 +02:00
Alessandro Ranellucci
4c330b6c59
Merge pull request #1968 from sapir/extrudercpp
...
Translate Extruder class to C++
2014-04-28 21:45:53 +02:00
Alessandro Ranellucci
2720000a17
New get_trapezoids() implementation. Maybe heavier but it doesn't fail with some versions of GCC like the one provided by Boost.Polygon. #1965
2014-04-28 20:14:20 +02:00
Y. Sapir
ad03a88733
Add xsp wrapper for Pointf class.
2014-04-28 01:13:50 +03:00
Y. Sapir
e005ff32c4
Replace Extruder::config accessor with Perl wrapper, with C++ option accessors.
2014-04-28 00:49:05 +03:00
Y. Sapir
2565d80679
Replace multitude of Extruder fields with querying a PrintConfig object by id.
2014-04-27 23:43:44 +03:00
Y. Sapir
04fad70cbf
Make C++ gcode generator use C++ Extruder object directly.
2014-04-27 23:43:43 +03:00
Y. Sapir
66d23a2416
Convert Extruder object (mostly) to C++ with lots of fields.
2014-04-27 23:42:59 +03:00
Petr Ledvina
115aa6885f
Implement type checking for XS objects
...
Type handling is mainly done using templates.
Template Slic3r::ClassTraits is used to store info about exported types (perl class name). Currently only perl class name and refference name is used.
Template values are initialized by REGISTER_CLASS macro. This macro is used in .cpp file of class ( it needs to be used exactly for each type).
Ref<type> class is used to return value as perl reference. Operator overloading is used to make c++ and XSpp happy, only pointer value should be possible to return.
Clone<type> class is used to return copy of value ( using new and copy constructor). Copy is created on assigment, this should be probably improved (memory leak on multiple assignments).
It is overloaded to be able to return type, type* and type&.
Typechecking in ExtrusionEntityCollection updated to check all passed types.
2014-04-27 19:38:56 +02:00
Alessandro Ranellucci
f6897a346a
Fix islands not being ordered efficiently with the logic that completes each of them before moving to the next one (which is now the default behavior). #1137
2014-04-25 19:11:17 +02:00
Alessandro Ranellucci
8db4913b04
New option for rotating the lower part resulting from the cut so that the flat surface lies on the print bed
2014-04-25 17:50:03 +02:00
Alessandro Ranellucci
4f17c2b7d1
First working implementation of a GUI for cutting
2014-04-25 17:14:39 +02:00
Alessandro Ranellucci
4f5d9ca795
Finished --cut implementation
2014-04-25 12:40:21 +02:00
Alessandro Ranellucci
37c7b958d4
New ExPolygon::triangulate() method
2014-04-24 17:06:16 +02:00
Alessandro Ranellucci
bb0ce3cccd
New Polygon::triangulate_convex() method
2014-04-24 16:59:36 +02:00
Alessandro Ranellucci
ca4d4211c9
Refactored signatures of many C++ methods for more efficient and safer style. Includes a bugfix for Point::nearest_point() which was returning a pointer to freed memory. #1961
2014-04-24 16:40:10 +02:00
Alessandro Ranellucci
6201aacf88
New coverage detection for bridges. Includes implementation of ExPolygon::get_trapezoids()
2014-04-24 13:44:39 +02:00
Alessandro Ranellucci
7041ebdd22
Workaround for upstream module bug causing command line option parsing for multi-boolean options like retract-layer-change and wipe
2014-04-19 19:14:41 +02:00
Y. Sapir
4deeff995a
Move extrusion path gcode generation to C++ for speed.
2014-04-01 21:11:43 +03:00
Alessandro Ranellucci
071097d3f1
Fix extruder assignment and tests
2014-03-27 00:01:33 +01:00
Alessandro Ranellucci
0ff33f47f1
Fix the extruder override logic. All role-based extruder options now default to 0, meaning no override is defined and the default (inherited) extruder is used. The default extruder option does not use the shortcut logic anymore (it was thus moved to be a CLI-specific logic)
2014-03-26 00:08:15 +01:00
Alessandro Ranellucci
432a87e73d
New option for forcing the generation of interface shells. #1847
2014-03-25 01:11:28 +01:00
Alessandro Ranellucci
7a58457add
Prevent GUI from crashing when invalid values were written in numeric fields. Includes basic validation. #1709
2014-03-24 01:07:30 +01:00
Alessandro Ranellucci
7421a7bf63
Turn fill_density into percentage
2014-03-22 16:23:33 +01:00
Alessandro Ranellucci
ed8a2f7330
Extend medial axis endpoints to fill the entire length. Includes fix for a minor memory leak caused by usage of old signature for Line::point_at()
2014-03-15 16:53:20 +01:00
Alessandro Ranellucci
52de292a48
Fixed wrong refactoring of perimeter tree traversal. #1832
2014-03-15 02:16:04 +01:00
Alessandro Ranellucci
7f5442265e
Include thin walls in general top-level perimeter sorting to get more efficient paths
2014-03-09 20:19:30 +01:00
Alessandro Ranellucci
2a73ab988f
Recursive pruning. Some more unit tests
2014-03-09 17:46:02 +01:00
Alessandro Ranellucci
3c77b301a7
Promising approach to medial axis pruning
2014-03-04 23:33:13 +01:00
Alessandro Ranellucci
eadffe4a9e
Merge branch 'master' into boost-medialaxis
...
Conflicts:
lib/Slic3r/Layer/Region.pm
xs/src/ExPolygon.cpp
xs/src/Point.cpp
xs/src/Point.hpp
xs/src/TriangleMesh.cpp
xs/t/01_trianglemesh.t
2014-03-02 22:36:20 +01:00
Alessandro Ranellucci
691db31da0
Some incomplete work for per-region config
2014-02-14 22:26:00 +01:00
Alessandro Ranellucci
cfc1c5037d
Mark strings as UTF-8 when passing them to Perl
2014-02-14 22:25:59 +01:00
Alessandro Ranellucci
3d483722c6
Perform additional checks before merging solid surfaces (i.e. take flow and fill pattern into account)
2014-02-10 13:19:44 +01:00
Alessandro Ranellucci
42519174cd
New erase() method for DynamicConfig objects
2014-01-22 21:15:19 +01:00
Alessandro Ranellucci
90194ee581
Fix overflow in Point::ccw() affecting convex hull generation. Includes regression test
2014-01-17 14:49:51 +01:00
Alessandro Ranellucci
0d7f0705f0
Fix overflow in distance_to(Line*). It was affecting Douglas-Peucker causing massive loss of geometry. Includes regression test and a couple wkt() implementations
2014-01-17 14:22:37 +01:00
Alessandro Ranellucci
3a3e53b59b
Fixed some obvious mistakes and applied strict type checking to SurfaceCollections too
2014-01-16 19:02:50 +01:00
Alessandro Ranellucci
86f91bb3c4
New TriangleMeshSlicer::cut() method
2014-01-16 11:25:26 +01:00
Alessandro Ranellucci
519ed91c68
Refactored mesh slicing code into a new TriangleMeshSlicer class
2014-01-15 20:31:38 +01:00
Alessandro Ranellucci
3637ca39df
TriangleMesh::slice() now accepts a vector of floats instead of doubles for consistency with mesh coordinates
2014-01-12 23:56:07 +01:00
Alessandro Ranellucci
bf91f3096a
Incomplete work for using Boost.Polygon to compute medial axis
2014-01-09 17:26:39 +01:00
Alessandro Ranellucci
c8a48b4527
Implement modifier volumes and port _merge_loops() to XS
2014-01-07 15:40:38 +01:00
Alessandro Ranellucci
b17d06f9d1
Finished porting BoundingBox to XS
2014-01-07 12:48:09 +01:00
Alessandro Ranellucci
9c0a6a79d3
Incomplete work for porting BoundingBox to XS
2014-01-06 18:29:10 +01:00
Alessandro Ranellucci
c523ddea35
Fix option names not showing in plater object settings
2014-01-05 14:58:41 +01:00
Alessandro Ranellucci
036badf932
Ported Flow to XS
2014-01-05 13:16:13 +01:00
Alessandro Ranellucci
07b9b12475
Make tests pass
2014-01-05 00:36:33 +01:00
Alessandro Ranellucci
8ed738d3f7
More incomplete work for Flow/Extruder refactoring
2014-01-03 18:27:46 +01:00
Alessandro Ranellucci
81663215c5
Adapt plater to the new split config
2014-01-02 22:06:58 +01:00
Alessandro Ranellucci
5bf0942f45
Satisfy test suite and CLI
2014-01-02 17:24:23 +01:00
Alessandro Ranellucci
e2f1040a76
More work
2014-01-02 10:44:54 +01:00
Alessandro Ranellucci
0883d0f4eb
More work here and there
2014-01-01 17:29:15 +01:00
Alessandro Ranellucci
0693cfb116
Simplify print_def structure
2013-12-24 01:16:51 +01:00
Alessandro Ranellucci
ab25cc4940
Merge branch 'xs-config'
...
Conflicts:
lib/Slic3r/Config.pm
xs/MANIFEST
2013-12-22 01:41:55 +01:00
Alessandro Ranellucci
c0070a8d54
Satisfy test suite with new XS based config
2013-12-22 01:38:10 +01:00
Alessandro Ranellucci
4515d90052
Finished porting Config and option definition to XS
2013-12-22 00:39:03 +01:00
Alessandro Ranellucci
9836e963a5
Incomplete work for adapting the application to the new XS-based Config
2013-12-21 21:06:45 +01:00
Alessandro Ranellucci
e0c0a42a8b
Expose static PrintConfig objects to Perl and test apply()
2013-12-21 16:32:11 +01:00
Alessandro Ranellucci
56d4da2ac7
Decoupled a generic Config implementation from the PrintConfig definitions
2013-12-21 16:15:41 +01:00
Alessandro Ranellucci
64e549a46f
More work for XS Config
2013-12-20 20:54:11 +01:00
Alessandro Ranellucci
008f38cf68
More work for porting Config to XS
2013-12-20 16:37:28 +01:00
Alessandro Ranellucci
a6a6a6888b
Ported Slic3r::Print::State to XS
2013-12-20 01:36:42 +01:00
Alessandro Ranellucci
0e8a0ef1ca
Refactoring. Use Model class for representing the plate in GUI
2013-12-12 20:19:33 +01:00
Alessandro Ranellucci
f55e057504
More work for refactoring add_model() to add_model_object(). Tests pass
2013-12-09 01:12:37 +01:00
Alessandro Ranellucci
e9b87b69df
Bugfix: segfault in SurfaceCollection->group(), fixed with a better implementation. #1566
2013-12-04 00:11:08 +01:00
Alessandro Ranellucci
af457cd3d7
Fix compilation on Windows
2013-11-24 11:24:10 +01:00
Alessandro Ranellucci
9cf138574c
New TriangleMesh::convex_hull()
2013-11-24 01:15:52 +01:00
Alessandro Ranellucci
a93c862338
Ported traverse_pt() to XS
2013-11-23 23:21:59 +01:00
Alessandro Ranellucci
3a5e4931cc
Move Geometry.cpp to Slic3r::Geometry namespace
2013-11-23 21:54:56 +01:00
Alessandro Ranellucci
0516aac715
Ported chained_path() to XS
2013-11-23 21:39:05 +01:00
Alessandro Ranellucci
4d5d003ba7
Ported horizontal_projection() to XS
2013-11-23 19:41:40 +01:00
Alessandro Ranellucci
46e3b3180e
Ported Surface->offset() to XS
2013-11-23 18:29:25 +01:00
Alessandro Ranellucci
a331f4d27a
Finished porting group() to XS
2013-11-23 18:15:59 +01:00
Alessandro Ranellucci
67a7e4f769
Change method signature for slice()
2013-11-23 00:15:42 +01:00
Alessandro Ranellucci
878d587196
Ported is_solid() and is_bridge() to XS. Also ported (but not used yet) group() to SurfaceCollection::group()
2013-11-23 00:07:04 +01:00
Alessandro Ranellucci
5309e3ef22
More files for convex_hull
2013-11-22 22:38:30 +01:00
Alessandro Ranellucci
a950fbe0c2
Removed more unused functions and fixed tests
2013-11-22 16:19:15 +01:00
Alessandro Ranellucci
df8d889481
More unfinished work
2013-11-22 02:16:10 +01:00
Alessandro Ranellucci
518798beb3
Incomplete work for porting simplify() to XS
2013-11-21 20:25:24 +01:00
Alessandro Ranellucci
ac88fbcbb0
Ported clip_end(), length(), is_perimeter(), is_fill(), is_bridge() to XS
2013-11-21 18:03:40 +01:00
Alessandro Ranellucci
761f261a68
Ported intersect_expolygons() and subtract_expolygons() to XS
2013-11-21 17:53:50 +01:00
Alessandro Ranellucci
5f81292f3f
Ported encloses_point() to XS and renamed to contains_point()
2013-11-21 16:21:42 +01:00
Alessandro Ranellucci
a225a8b2ef
Ported contains_line() to XS
2013-11-21 15:12:06 +01:00
Alessandro Ranellucci
3025c77675
Use Clipper for line clipping
2013-11-21 14:15:38 +01:00
Alessandro Ranellucci
50c0081d25
Update Clipper to 6.0.0
2013-11-20 11:35:58 +01:00
Alessandro Ranellucci
885ab5844e
Ported regular_points() to XS and renamed it to equally_spaced_points()
2013-11-11 20:59:58 +01:00
Alessandro Ranellucci
d8e098ab0e
Ported same_line() to XS
2013-11-06 19:38:10 +01:00
Alessandro Ranellucci
b5aaeb9b12
More work on the clipping method for medial axis. Includes Polyline->is_valid()
2013-11-06 19:30:45 +01:00
Alessandro Ranellucci
29b83517cb
Ported point_along_segment(), Polyline::length(), Polyline::clip_end() to XS
2013-10-27 22:57:25 +01:00
Alessandro Ranellucci
4fe0675380
Removed ZTable code
2013-09-17 23:55:38 +02:00
Alessandro Ranellucci
e0da81e8bf
Introduce a ->count method for all collections to save time
2013-09-17 23:38:23 +02:00
Alessandro Ranellucci
aef5c05c57
Update brim generation code. Includes regression test. #1440
2013-09-16 10:33:30 +02:00
Alessandro Ranellucci
4dce461aaf
Minor optimizations
2013-09-13 15:19:15 +02:00
Alessandro Ranellucci
bc48e17dff
Use precomputed normals in 3D preview
2013-09-11 20:15:42 +02:00
Alessandro Ranellucci
a821eb7f3c
More work to avoid working with vertices outside XS
2013-09-11 11:55:08 +02:00
Alessandro Ranellucci
11e18f681d
Incomplete work to store TriangleMesh objects in Model objects instead of extracting vertices and facets
2013-09-11 09:49:28 +02:00
Alessandro Ranellucci
566d38a472
Replace TriangleMesh with the XS port
2013-09-10 00:40:46 +02:00
Alessandro Ranellucci
311eda7d42
Implemented TriangleMesh->clone
2013-09-10 00:09:56 +02:00
Alessandro Ranellucci
9b12d6037a
Ported TriangleMesh::scale_xyz()
2013-09-09 23:38:49 +02:00
Alessandro Ranellucci
5e34a9cf21
Make Repair() idempotent and lowercase
2013-09-09 23:18:33 +02:00
Alessandro Ranellucci
28b043e9a9
Add unit test for split()
2013-09-09 23:09:56 +02:00
Alessandro Ranellucci
3919ba83d8
Implemented TriangleMesh->merge
2013-09-09 22:45:22 +02:00
Alessandro Ranellucci
27e7c6b9f7
Finished implementation of TriangleMesh->split
2013-09-09 22:27:58 +02:00
Alessandro Ranellucci
c592932cee
Use a general-purpose T_ARRAYREF_PTR typemap
2013-09-09 21:43:28 +02:00
Alessandro Ranellucci
346c17d483
Some initial work for porting slice()
2013-09-07 14:06:09 +02:00
Alessandro Ranellucci
907ba55aab
Some minor fixes needed after the xsdata merge. #1421
2013-09-06 22:52:56 +02:00
Alessandro Ranellucci
e02ae0d18a
Return Surface objects by reference from SurfaceCollection objects and fix a bug in XS code causing some shell options to be ignored
2013-09-06 18:36:38 +02:00
Alessandro Ranellucci
cb677c45de
Don't grow horizontal shells having acute angles. #1387
2013-09-06 17:43:40 +02:00
Alessandro Ranellucci
a49dc603cc
Many changes and fixes to remove leaks and return objects by reference
2013-09-03 19:26:58 +02:00
Alessandro Ranellucci
c0789506e4
Return objects by reference instead of always cloning
2013-09-02 20:22:20 +02:00
Alessandro Ranellucci
1741301973
Fix segfault when appending an ExtrusionPath::Collection to another Collection
2013-08-31 01:23:47 +02:00
Alessandro Ranellucci
dd70f6be2f
Return ExtrusionPath->polyline and ExtrusionLoop->polygon by reference
2013-08-31 00:50:03 +02:00
Alessandro Ranellucci
d2e4bba074
Fixed memory leak in ExtrusionPath::Collection and return collection items by reference
2013-08-31 00:37:17 +02:00
Alessandro Ranellucci
bb45437526
Return Surface->expolygon by reference
2013-08-31 00:28:24 +02:00
Alessandro Ranellucci
1cfdf7e955
Ported Slic3r::Polyline::Collection
2013-08-30 00:06:10 +02:00
Alessandro Ranellucci
bd7b0e2aed
Ported ExtrusionPath::Collection->chained_path
2013-08-29 11:47:59 +02:00
Alessandro Ranellucci
ea1d138c95
Ported ExtrusionLoop->make_counter_clockwise()
2013-08-29 01:40:42 +02:00
Alessandro Ranellucci
5d6fd7f4d9
Optimizations for better usage of XS code
2013-08-29 01:36:42 +02:00
Alessandro Ranellucci
e19c6a1494
Ported Point->distance_to() and Line->length()
2013-08-28 20:41:41 +02:00
Alessandro Ranellucci
fb763b0187
Removed dependency on Math::Clipper
2013-08-27 01:26:44 +02:00
Alessandro Ranellucci
b11b595c97
Ported nearest_point() and nearest_point_index()
2013-08-27 00:52:20 +02:00
Alessandro Ranellucci
9fb14f2119
Ported (and used) ExtrusionPath->first_point
2013-08-26 23:42:00 +02:00
Alessandro Ranellucci
fe42427a54
Ported Polygon->is_valid() and ExPolygon->is_valid()
2013-08-26 23:27:51 +02:00
Alessandro Ranellucci
da0b85c0d9
Ported ExPolygon->contour and ExPolygon->holes
2013-08-26 23:09:18 +02:00
Alessandro Ranellucci
85011dfef3
Ported Surface->p
2013-08-26 23:03:00 +02:00
Alessandro Ranellucci
706851f836
Ported ExPolygon->area()
2013-08-26 22:50:26 +02:00
Alessandro Ranellucci
792fcba7be
Ported Polygon->area
2013-08-26 22:44:40 +02:00
Alessandro Ranellucci
1f734807b9
Ported Polygon->split_at()
2013-08-26 22:39:35 +02:00
Alessandro Ranellucci
9cf831b9c5
Ported union_pt() to XS
2013-08-26 18:37:19 +02:00
Alessandro Ranellucci
443d4e52cb
Fixed everything in the XS port
2013-08-26 17:58:37 +02:00
Alessandro Ranellucci
94ca28644e
Ported union() to XS
2013-08-17 12:24:04 +02:00
Alessandro Ranellucci
b38cc2c244
Merge branch 'master' into xsdata
...
Conflicts:
lib/Slic3r.pm
lib/Slic3r/ExPolygon.pm
lib/Slic3r/Fill.pm
lib/Slic3r/Fill/Rectilinear.pm
lib/Slic3r/GCode.pm
lib/Slic3r/GUI/Plater.pm
lib/Slic3r/Geometry/Clipper.pm
lib/Slic3r/Layer/Region.pm
lib/Slic3r/Print.pm
lib/Slic3r/Print/Object.pm
lib/Slic3r/TriangleMesh.pm
t/shells.t
xs/MANIFEST
2013-08-08 02:10:34 +02:00
Alessandro Ranellucci
d881c5ab2f
Ported TriangleMesh->rotate
2013-08-05 19:52:37 +02:00
Alessandro Ranellucci
9402898c58
Ported TriangleMesh->size
2013-08-05 19:39:10 +02:00
Alessandro Ranellucci
9d50616c7d
Ported align_to_origin()
2013-08-05 19:22:33 +02:00
Alessandro Ranellucci
597e9e6c14
Finish porting TriangleMesh->translate
2013-08-05 19:17:13 +02:00
Alessandro Ranellucci
04d5d1bb9b
Incomplete work for porting translate()
2013-08-05 10:48:38 +02:00
Alessandro Ranellucci
515d5707c9
Ported TriangleMesh->scale
2013-08-04 21:34:26 +02:00
Alessandro Ranellucci
a0bd152243
Remove ->ToPerl and add ->vertices and ->facets
2013-08-04 21:23:27 +02:00
Alessandro Ranellucci
9d13a90837
Missing #include causing XS build to fail. #1349
2013-07-23 11:36:18 +02:00
Alessandro Ranellucci
b1147861dd
Implement lower_bound() and upper_bound() methods for ZTable
2013-07-20 21:19:59 +02:00
Alessandro Ranellucci
1b285f3f46
Thread-safe integration of ExtrusionPath::Collection
2013-07-18 22:29:12 +02:00
Alessandro Ranellucci
c030e38908
Ported ExtrusionPath::Collection
2013-07-18 19:09:07 +02:00
Alessandro Ranellucci
0efea9e442
Ported diff() and intersection()
2013-07-17 01:21:30 +02:00
Alessandro Ranellucci
c7b6818ccf
Ported offset() and offset2()
2013-07-17 00:48:29 +02:00
Alessandro Ranellucci
bf8c799685
Ported diff_ex, intersection_ex, union_ex, xor_ex
2013-07-17 00:29:09 +02:00
Alessandro Ranellucci
f7ada2b5db
Ported make_clockwise() and make_counter_clockwise()
2013-07-16 21:09:29 +02:00
Alessandro Ranellucci
fe061b19ad
Ported Polygon->is_counter_clockwise() and rearranged code in .cpp files
2013-07-16 21:04:14 +02:00
Alessandro Ranellucci
bd3fb21cfd
Make offset_ex(), offset2_ex() and diff_ex() available to C++ code
2013-07-16 20:36:27 +02:00
Alessandro Ranellucci
79db996696
Ported diff_ex() to XS
2013-07-16 20:29:15 +02:00
Alessandro Ranellucci
898007fc36
Port offset_ex() and offset2_ex() to XS
2013-07-16 20:09:53 +02:00
Alessandro Ranellucci
9458c7db97
Fix integration of XS containers
2013-07-16 17:13:01 +02:00
Alessandro Ranellucci
9b582a11ff
Adopt XS containers everywhere (incomplete work)
2013-07-16 09:49:34 +02:00
Alessandro Ranellucci
339ba9e5c3
Implement split_at_index() and split_at_first_point() in ExtrusionLoop too
2013-07-15 23:56:01 +02:00
Alessandro Ranellucci
0d07a2e4e6
Implemented split_at_index() and split_at_first_point() for Polygon
2013-07-15 23:38:06 +02:00
Alessandro Ranellucci
62e5bd0ee7
Polygon->lines
2013-07-15 23:28:23 +02:00
Alessandro Ranellucci
77c479c127
Add test for polyline lines
2013-07-15 23:23:35 +02:00
Alessandro Ranellucci
439255ca46
Polyline->lines
2013-07-15 23:12:13 +02:00
Alessandro Ranellucci
ab6b3d41a7
XS interface completed, including new Line class
2013-07-15 22:57:22 +02:00
Alessandro Ranellucci
9af2a1c007
Use XS Point everywhere
2013-07-15 20:31:43 +02:00
Alessandro Ranellucci
d0701cdcd4
Implemented Slic3r::ExtrusionLoop
2013-07-15 16:21:09 +02:00
Alessandro Ranellucci
c9749ca3b3
More integration of Slic3r::Point::XS
2013-07-15 16:04:49 +02:00
Alessandro Ranellucci
e485f0b130
Return a reference to the actual item instead of a clone when accessing contents of a SurfaceCollection
2013-07-15 13:50:53 +02:00
Alessandro Ranellucci
f612d4c64e
Ported ExtrusionPath to XS. Failing test for Surface
2013-07-15 12:14:22 +02:00
Alessandro Ranellucci
06de21b154
Better polymorphism for ExPolygon::XS->rotate
2013-07-14 16:03:06 +02:00
Alessandro Ranellucci
13e3a9129c
Use Slic3r::ExPolygon::Collection for Layer->slices
2013-07-14 15:06:49 +02:00
Alessandro Ranellucci
5885be881c
New Slic3r::Surface::Collection class
2013-07-14 14:56:43 +02:00
Alessandro Ranellucci
0099218f61
Cleaner clone() implementation
2013-07-14 13:11:01 +02:00
Alessandro Ranellucci
399bc80899
Ported Slic3r::Surface to XS
2013-07-14 13:05:55 +02:00
Alessandro Ranellucci
b1ad466189
Ported Slic3r::ExPolygon::Collection to XS
2013-07-14 00:38:01 +02:00
Alessandro Ranellucci
31809d473f
Merge branch 'master' into xsdata
...
Conflicts:
lib/Slic3r/GCode.pm
xs/src/Point.hpp
2013-07-13 21:00:19 +02:00
Alessandro Ranellucci
6affa23297
Show repair stats in object info dialog
2013-07-13 20:23:03 +02:00
Alessandro Ranellucci
00683195c8
Add two more repair actions and add volume to stats
2013-07-13 19:00:38 +02:00
Alessandro Ranellucci
b709acf10f
New TriangleMesh::XS->stats method
2013-07-13 18:51:49 +02:00
Alessandro Ranellucci
89fae9ee15
Make threaded perls work with XS data in plater thumbnails. Includes cleaner ->arrayref implementation
2013-07-11 19:34:37 +02:00
Alessandro Ranellucci
87a5de193d
ExPolygon::XS->rotate()
2013-07-11 18:55:51 +02:00
Alessandro Ranellucci
e0052b01d3
New ->scale() method for ExPolygon::XS
2013-07-11 14:08:11 +02:00
Alessandro Ranellucci
21816acbd7
Merge branch 'master' into xsdata
...
Conflicts:
xs/xsp/ExPolygon.xsp
2013-07-07 16:53:58 +02:00
Alessandro Ranellucci
f4db7625bc
Fix destructors
2013-07-07 16:51:02 +02:00
Alessandro Ranellucci
a1e4bda670
Have Clipper.pm only return ExPolygon::XS objects
2013-07-07 15:17:09 +02:00
Alessandro Ranellucci
989e48ede0
Bless arrayref representation into Slic3r classes
2013-07-07 13:34:55 +02:00
Alessandro Ranellucci
d06ac3e31e
Rename _toPerl() to arrayref()
2013-07-07 12:41:54 +02:00
Alessandro Ranellucci
51dd4d4e8a
Compile fixes
2013-07-06 22:00:54 +02:00
Alessandro Ranellucci
4093280566
Remove Point.cpp
2013-07-06 16:39:22 +02:00
Alessandro Ranellucci
5a11d4df89
New Slic3r::ExPolygon::XS class
2013-07-06 16:33:49 +02:00
Alessandro Ranellucci
c50ecfb7f8
New Slic3r::Point::XS class
2013-07-06 15:26:32 +02:00
Alessandro Ranellucci
6373322b84
New ReadFromPerl() method
2013-07-03 11:38:01 +02:00
Alessandro Ranellucci
d30b4f0310
New Slic3r::TriangleMesh::XS->ToPerl() method
2013-06-24 20:11:56 +02:00
Alessandro Ranellucci
f29faf0548
New Slic3r::TriangleMesh::XS class
2013-06-24 19:35:49 +02:00
Alessandro Ranellucci
2a2633da0a
New automatic built-in STL repair
2013-06-23 21:11:46 +02:00
Alessandro Ranellucci
f62896a77a
Require some recent versions
2013-06-23 20:05:20 +02:00
Alessandro Ranellucci
77440b774d
Include admesh code for STL repair
2013-06-23 18:18:38 +02:00
Alessandro Ranellucci
f3a9d41c70
Cache a Z table for layer range search
2013-06-23 17:07:12 +02:00
Alessandro Ranellucci
37105e8237
Ported get_layer_range() to C
2013-06-23 15:33:07 +02:00
Alessandro Ranellucci
9d27b5e4a7
New XS framework for C and C++ code
2013-06-22 17:16:45 +02:00