3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
16,848 Commits 1 Branch 1 Tag 249 MiB
3f1c845089
Commit Graph

3727 Commits

Author SHA1 Message Date
Alessandro Ranellucci
05e4571310 Do perimeters from outside to inside. #466 2012-06-23 17:41:44 +02:00
Henrik Brix Andersen
d0588c2ef8 Ask for confirmation before closing if there are unsaved presets. 2012-06-23 17:39:20 +02:00
Henrik Brix Andersen
1409cbf7f7 Add Slic3r::GUI::Tab::is_dirty() 2012-06-23 17:38:19 +02:00
Alessandro Ranellucci
410279823c New separate option to control the addition of automatic extra perimeters. Also, add none if perimeters are set to 0. #459 2012-06-23 17:10:30 +02:00
Mark Hindess
f61a1f5a07 Create *::Geometry::nearest_point_index to speed up shortest_path method. 
This fix gives a further 10% speedup on simcop2387's coaster.
 2012-06-22 23:12:39 +01:00
Mark Hindess
62eb41b967 Manage flattened endpoint list rather than creating it at every iteration. 
Gives an 8% speedup on simcop2387's coaster for me.
 2012-06-22 23:12:39 +01:00
Henrik Brix Andersen
b59040f954 Rename 'Save Config' menu item to 'Export Config' to match button label. 2012-06-21 22:50:40 +02:00
Henrik Brix Andersen
60ff9938ef - Add Slic3r::Config::get_raw() for getting the raw, uncalculated values. 
- Use get_raw() for saving and displaying options in GUI

Forward-ported from 4031cf26b4
 2012-06-21 13:28:55 +02:00
Henrik Brix Andersen
f2617bffda Add debug information for locating a users data directory 2012-06-21 13:21:42 +02:00
Henrik Brix Andersen
c4f8c36ecc Handle ENTER key in Slic3r::GUI::SavePresetWindow 2012-06-21 13:01:59 +02:00
Henrik Brix Andersen
f69903573a Always enable preset save button. 2012-06-21 12:20:18 +02:00
Alessandro Ranellucci
a578af9d28 Fix support material 2012-06-21 11:51:24 +02:00
Alessandro Ranellucci
94e28b9ab8 Require Math::Clipper 1.09 because it contains important bugfixes 2012-06-21 10:53:04 +02:00
Alessandro Ranellucci
81a5267cc7 Fix widths on plater 2012-06-20 22:50:38 +02:00
Alessandro Ranellucci
ac59297e39 Fixes for Windows 2012-06-20 21:43:06 +02:00
Alessandro Ranellucci
8d465aca34 A couple fixes for GTK 2012-06-20 17:17:07 +02:00
Alessandro Ranellucci
69c3f12c60 Workaround for GTK issues 2012-06-20 17:08:38 +02:00
Alessandro Ranellucci
be8970b497 Fixed regression causing infill lines not being always connected near perimeters 2012-06-19 18:49:46 +02:00
Alessandro Ranellucci
a664709b31 Remember last presets 2012-06-19 18:11:51 +02:00
Alessandro Ranellucci
0ef8da42a6 Preset deletion 2012-06-19 17:47:48 +02:00
Alessandro Ranellucci
b910840f76 Preset shortcuts in the plater tab 2012-06-19 17:23:10 +02:00
Henrik Brix Andersen
8fcf24a766 Merge pull request #467 from henrikbrixandersen/ratio-options 
Two small ratio option improvements/bug fixes
 2012-06-19 06:44:16 -07:00
Henrik Brix Andersen
4031cf26b4 - Add Slic3r::Config::get_raw() for getting the raw, uncalculated values. 
- Use get_raw() for saving and displaying options in GUI
 2012-06-19 15:32:56 +02:00
Alessandro Ranellucci
0003c093e3 Reflect external configs in preset menus 2012-06-19 14:47:02 +02:00
Henrik Brix Andersen
8d25e6490a Set CLI option type to 'string' for all options allowing ratio inputs 2012-06-19 11:38:12 +02:00
Henrik Brix Andersen
b7d2860d5b Allow negating bool cli options by using '--no-foo' or '--nofoo' 2012-06-18 23:39:53 +02:00
Alessandro Ranellucci
35f36e0446 New preset management (unfinished) 2012-06-18 22:27:57 +02:00
Alessandro Ranellucci
9e6e3bd269 Custom Treebook implementation 2012-06-18 16:46:43 +02:00
Alessandro Ranellucci
e810f9b898 Moved filament settings to new Filament tab 2012-06-18 14:29:47 +02:00
Alessandro Ranellucci
20e1a9c860 Updates to the description and the README 2012-06-18 13:52:38 +02:00
Alessandro Ranellucci
2b6b91cd01 Tooltips 2012-06-18 13:49:14 +02:00
Alessandro Ranellucci
d8a64f0386 Use spin controls for integer values 2012-06-18 11:52:45 +02:00
Alessandro Ranellucci
f38f2f139e Make window resizable 2012-06-18 11:26:21 +02:00
Alessandro Ranellucci
19a78de82f Enlarge the Output filename format field 2012-06-18 10:28:53 +02:00
Alessandro Ranellucci
a59b82db06 Switch from wxComboBox to wxChoice 2012-06-18 10:24:17 +02:00
Alessandro Ranellucci
72298877bb Moved units of measure to the right of input fields 2012-06-18 10:19:24 +02:00
Alessandro Ranellucci
b7983b54f8 Remove label for large text fields 2012-06-17 23:24:10 +02:00
Alessandro Ranellucci
ce9fdbc047 Icons for settings 2012-06-17 22:54:08 +02:00
Alessandro Ranellucci
21ef09c228 Group settings using Treebooks 2012-06-17 22:27:05 +02:00
Alessandro Ranellucci
48d345c189 Bugfix: first_layer_speed was accepting mm/m values rather than mm/s when expressed as absolute. #452 2012-06-17 19:42:11 +02:00
Alessandro Ranellucci
217a6f2525 Bugfix: any retraction_lift value different from "0" caused no retraction before layer changes. #453 2012-06-17 19:36:02 +02:00
Alessandro Ranellucci
7d6545dd07 Further simplification of point_in_polygon() 2012-06-17 19:09:11 +02:00
Mark Hindess
2ef565fc4d Simplify creation of $n, @x and @y in point_in_polygon test. 
Gives 30% speed up on simcop2387's coaster on my laptop and it cuts the
maximum resident set size too.  I know this is going to be replaced but
thought this might be useful in the meantime.
 2012-06-16 08:28:37 +01:00
Alessandro Ranellucci
ca8a91b2b0 Only apply arc compensation to circular holes. #418 2012-06-14 15:06:22 +02:00
Alessandro Ranellucci
b00d960f4d Merge pull request #450 from henrikbrixandersen/growl 
Move Growl::GNTP handling to Slic3r::GUI
 2012-06-14 05:35:25 -07:00
Henrik Brix Andersen
129f0fa904 Move Growl::GNTP handling to Slic3r::GUI to allow notifications from both Slic3r::GUI::SkeinPanel and Slic3r::GUI::Plater. 2012-06-14 13:49:50 +02:00
Nicolas Dandrimont
4296ea6da1 Slic3r::Polygon's boost_linestring method needs to close the contour. 
This prevented Slic3r from detecting some bridge supporting edges
(basically, if that edge was the last one in the contour).  This
addresses some of the bridge detection issues (#414, #358).
 2012-06-14 13:33:59 +02:00
Henrik Brix Andersen
3aa901f149 Show version and description in About dialog 2012-06-12 23:51:59 +02:00
Henrik Brix Andersen
65d6a83672 wxID_EXIT is already imported, no need to specify package name 2012-06-12 23:47:59 +02:00
Henrik Brix Andersen
230d4377c9 Fix display of special menu items (wxID_ABOUT, wxID_EXIT) on OS X 2012-06-12 23:46:50 +02:00
Alessandro Ranellucci
b926e0b27d Support material lines need to be white 2012-06-11 20:42:39 +02:00
Alessandro Ranellucci
55ed4af06e DLP support material in SVG output (untested) 2012-06-11 14:47:48 +02:00
Alessandro Ranellucci
1f35a3f6aa Fixed regression preventing SVG export to work properly. #428 2012-06-11 13:50:38 +02:00
Alessandro Ranellucci
71c1c66985 Label and CLI option were wrong for top_solid_infill_speed. #425 2012-06-11 13:45:03 +02:00
Alessandro Ranellucci
c0c84d13b8 Always set bed temperature after first layer if first layer temperature is set. #427 2012-06-11 13:43:23 +02:00
Alessandro Ranellucci
3e94add8a8 Pass config options as environment variables to post-processing scripts 2012-06-09 17:52:03 +02:00
Alessandro Ranellucci
62bd33a766 Fixed regression causing fatal errors. #429 2012-06-09 15:53:14 +02:00
Alessandro Ranellucci
0c4b112718 Fixed regression preventing arcs to be generated at all (center detection is still buggy) 2012-06-07 19:53:27 +02:00
Alessandro Ranellucci
c0c53c4397 Fill gaps. #281 2012-06-07 15:31:51 +02:00
Alessandro Ranellucci
00c6b1bdf8 Bugfix: some thin walls still gave a fatal error. #416 2012-06-07 12:21:33 +02:00
Alessandro Ranellucci
0226039dfb Fixed regression when cooling is enabled 2012-06-07 11:38:54 +02:00
Alessandro Ranellucci
caa32ab282 Fixed regression causing flow errors when using legacy config files. #421 2012-06-07 11:24:45 +02:00
Alessandro Ranellucci
709c444976 Fixed fatal error when using --first-layer-extrusion-width 2012-06-07 11:17:35 +02:00
Alessandro Ranellucci
5c9916dc75 Some basic ability to close holes in non-manifold models 2012-06-06 22:28:23 +02:00
Alessandro Ranellucci
85ef7ce665 Bugfix: many thin walls were not detected correctly. #313 2012-06-06 21:27:39 +02:00
Alessandro Ranellucci
fbfbfac2b6 New --top-solid-infill-speed option. Also, --solid-infill-speed and --small-perimeter-speed can be expressed as ratios too. #174 #151 2012-06-06 19:59:20 +02:00
Alessandro Ranellucci
2ccb443c2f Bugfix: not retracting between infill of different islands using low infill densities. #242 2012-06-06 19:38:35 +02:00
Alessandro Ranellucci
58a696e666 Lift Z when changing layer too 2012-06-06 19:20:43 +02:00
Alessandro Ranellucci
8883df6692 Warn user when object couldn't be split 2012-06-06 19:00:34 +02:00
Alessandro Ranellucci
13e10abbbe Fixed regression causing some models not to be sliced correctly. #410 2012-06-06 18:57:46 +02:00
Alessandro Ranellucci
c7af74884f Legacy config files were not correctly supported 2012-06-06 18:47:11 +02:00
Alessandro Ranellucci
82dd3c7a3e New --perimeters-extrusion-width and --infill-extrusion-width options. #302 2012-06-06 18:05:03 +02:00
Alessandro Ranellucci
8a031fe501 New --first-layer-extrusion-width option. #385 2012-06-06 17:29:12 +02:00
Alessandro Ranellucci
d412820733 Update: preview area was not updating to the largest side of the build area 2012-06-06 16:18:41 +02:00
Alessandro Ranellucci
16b774603c Accept either absolute or relative values for --first-layer-height. #151 2012-06-06 16:11:38 +02:00
Alessandro Ranellucci
896c7e952e Renamed bottom_layer_speed to first_layer_speed for consistency 2012-06-06 15:52:21 +02:00
Alessandro Ranellucci
4a188f8566 Support for legacy config files containing bottom_layer_speed_ratio. #151 2012-06-06 15:48:14 +02:00
Alessandro Ranellucci
91ffb74429 Accept either absolute or relative values for --bottom-layer-speed. #151 2012-06-06 15:43:54 +02:00
Alessandro Ranellucci
aedb6cc35f Accept both relative and absolute extrusion width values. #151 2012-06-06 15:23:34 +02:00
Alessandro Ranellucci
2e3c8241e4 Merge pull request #407 from beanz/simplify-check-manifoldness 
Remove grep that is effectively repeated.
 2012-06-05 01:57:45 -07:00
Josh McCullough
9da034a042 fixes #409 2012-06-05 10:55:02 +02:00
Mark Hindess
2689f49ef8 Remove grep that is effectively repeated. 2012-05-31 18:15:40 +01:00
Alessandro Ranellucci
ea83c562c1 Fixed regression caused by sequential printing code preventing skirt to extend past first layer. #396 2012-05-31 09:37:39 +02:00
Alessandro Ranellucci
3ef86ad6ff Allow loading multiple files at once. #402 2012-05-31 09:26:30 +02:00
Alessandro Ranellucci
8aa20cd784 Fixed the "Export SVG..." menu item. #399 2012-05-30 12:06:01 +02:00
Alessandro Ranellucci
5eae22f8b0 Enforce prompt when overwriting G-code files. #398 2012-05-30 11:55:46 +02:00
Alessandro Ranellucci
99b265a89a Fixed regression causing bad slicing 2012-05-29 17:12:00 +02:00
Alessandro Ranellucci
26051d12ef Bugfix: fatal error when a non-manifold object is processed on a non-thraeded perl 2012-05-29 17:02:47 +02:00
Alessandro Ranellucci
d8d2f73aff Fixed regression causing fatal errors with many objects. #394 2012-05-29 14:54:20 +02:00
Alessandro Ranellucci
af7ccb9fc1 Refactor resource paths 2012-05-29 14:19:14 +02:00
Alessandro Ranellucci
4db416773c Fixed typos in bed temperature M-codes. #386 2012-05-29 09:40:42 +02:00
Alessandro Ranellucci
bc4b4a981b Take extruder clearance radius into account when autopositioning 2012-05-29 09:38:53 +02:00
Alessandro Ranellucci
ce3e2d396e Fixed regression preventing STL export from working. #387 2012-05-29 09:35:57 +02:00
Alessandro Ranellucci
e383d5e02d Move struct format to constant 2012-05-28 20:29:51 +02:00
Alessandro Ranellucci
34e3dfdb08 Large memory savings (down to about 50%) for high-res input files 2012-05-28 19:58:27 +02:00
Alessandro Ranellucci
efdf266df1 Removed useless Polygon constructor and some cleanup 2012-05-23 11:51:20 +02:00
Alessandro Ranellucci
5a78111efa Options to set extruder clearance for sequential printing and graphical preview of collisions 2012-05-23 11:47:52 +02:00
Alessandro Ranellucci
2c28d2f874 Bugfix: with 0 solid layers, no infill was generated at all on fist and last layer. #325 2012-05-22 12:24:48 +02:00
Alessandro Ranellucci
e7d609db12 Fix previous commit about slicing from smallest to tallest 2012-05-21 20:23:17 +02:00
Alessandro Ranellucci
e4b37db13f Print objects from the smallest to the tallest to avoid extruder collisions (this applies when using the complete_objects setting) 2012-05-21 20:19:30 +02:00
Alessandro Ranellucci
181f750618 Invert SVG colors for DLP printing. #380 2012-05-21 18:29:19 +02:00
Alessandro Ranellucci
ce6b4aeaee New option to print each object completely before moving onto next one (watch out for extruder collisions, Slic3r isn't doing any check since it doesn't know its shape) 2012-05-20 20:08:59 +02:00
Alessandro Ranellucci
494f4f94bf After recent memory optimizations, no solid layers were made when using fill density == 0 2012-05-20 17:28:53 +02:00
Alessandro Ranellucci
67a076b360 Removing warnings here and there 2012-05-20 17:21:31 +02:00
Alessandro Ranellucci
2ae2c6a311 Remove thread warnings 2012-05-20 16:29:52 +02:00
Alessandro Ranellucci
59ba34caf3 Fix toolbar on Windows. #354 2012-05-20 16:24:10 +02:00
Alessandro Ranellucci
d550f3fb5f Fixed regression preventing top solid shells to be computed 2012-05-20 13:03:34 +02:00
Alessandro Ranellucci
731367a6a0 Bugfix, support material still not working well after memory optimizations 2012-05-20 11:44:30 +02:00
Alessandro Ranellucci
1998801a58 Read OBJ files. #324 2012-05-20 11:40:37 +02:00
Alessandro Ranellucci
fbe70ac15b Remove debugging statement 2012-05-20 11:08:44 +02:00
Alessandro Ranellucci
3c8dbcef4a Do not store normals and save a lot of memory 2012-05-20 11:05:16 +02:00
Alessandro Ranellucci
74c00cdb7a Yes, recent memory optimizations broke concentric infill too 2012-05-19 23:47:36 +02:00
Alessandro Ranellucci
4aa85f4571 Fixed arcs.t to work with new serialization mechanism 2012-05-19 23:39:36 +02:00
Alessandro Ranellucci
159ca3f65e Accept --threads 1 on non-threaded perls too 2012-05-19 23:18:29 +02:00
Alessandro Ranellucci
12c6e39837 Bugfix: hole compensation was making holes too large. #348 2012-05-19 23:12:21 +02:00
Alessandro Ranellucci
0bb487fe9f Recent memory optimizations broke support material generation 2012-05-19 22:53:30 +02:00
Alessandro Ranellucci
fa4f2c8b97 New option to randomize starting points across layers 2012-05-19 22:36:29 +02:00
Alessandro Ranellucci
b360b2bcea Fixed regression causing side gaps in solid infill 2012-05-19 21:57:47 +02:00
Alessandro Ranellucci
c97ced50ff Bugfix: GUI threading issues. #369 2012-05-19 21:13:10 +02:00
Alessandro Ranellucci
9f21d5b3c2 One more debugging statement left in 2012-05-19 21:03:24 +02:00
Alessandro Ranellucci
a981ac5c8e Don't display annoying warnings about parts not fitting in the printbed 2012-05-19 20:48:26 +02:00
Alessandro Ranellucci
190875d3df Debugging statement left in 2012-05-19 20:47:29 +02:00
Alessandro Ranellucci
23ae015c49 Memory optimizations broke multiple copies 2012-05-19 20:30:46 +02:00
Alessandro Ranellucci
22f8d57b36 Memory optimizations broke thin walls 2012-05-19 19:40:51 +02:00
Alessandro Ranellucci
b246480535 Massive reduction of memory usage (down to one third). 2012-05-19 17:57:38 +02:00
Alessandro Ranellucci
882a022e3a Even more constants, less memory, more speed 2012-05-19 16:04:33 +02:00
Alessandro Ranellucci
aa9563f00b More constants, less strings => ess memory usage 2012-05-19 15:40:11 +02:00
Alessandro Ranellucci
8fe5d11624 Set number of threads from GUI and save it in config files. #154 2012-05-19 15:08:32 +02:00
Alessandro Ranellucci
b93a46969d Better icon for Export G-code button 2012-05-19 15:02:23 +02:00
Alessandro Ranellucci
a99dea9ad3 Swap rotate cw and ccw buttons 2012-05-19 15:00:51 +02:00
Alessandro Ranellucci
2d67d6b0b6 Restore 100% flow for support material 2012-05-17 22:57:59 +02:00
Alessandro Ranellucci
76e079126f Don't rearrange plate upon object rotation 2012-05-17 19:32:50 +02:00
Alessandro Ranellucci
4bffa9cb6b Use perimeter length, not area, to detect small perimeters. #355 2012-05-14 00:30:52 +02:00
Alessandro Ranellucci
2a6ad2f3f7 Bugfix: removed warnings. #365 2012-05-13 22:56:40 +02:00
Mark Hindess
5a16756aac Avoid undef errors while keeping the debug so root cause can be found. 2012-05-10 22:23:24 +01:00
Mark Hindess
9d85a19b9d Rework fix to use undef correctly. 2012-05-10 19:07:20 +01:00
Mark Hindess
5ebf6a71cd Add FE_NONE with value 0 and increment FE_TOP and FE_BOTTOM to simplify 
and correct logic.
 2012-05-09 19:57:00 +01:00
Alessandro Ranellucci
9d9cef2145 Bugfix: error when slicing twice from plater 2012-05-05 21:26:19 +02:00
Alessandro Ranellucci
698b1e808d Use a separate thread for slicing so that GUI doesn't lock up. Also, add a Cancel button. #32 #35 2012-05-05 21:08:15 +02:00
Alessandro Ranellucci
8ba6405cc9 Bugfix: some nearly-thin walls were discarded. #261 2012-05-05 17:07:38 +02:00
Alessandro Ranellucci
edbdc5ec55 New automatic detection of additional required perimeters for better quality with domes and sloping walls. #198 2012-05-05 16:36:10 +02:00
Alessandro Ranellucci
4b7e9fc284 Fixed regression causing poor adhesion of rectilinear infill to perimeters 2012-05-04 20:51:09 +02:00
Alessandro Ranellucci
abe048686b More distance between object and support material. #343 2012-05-04 20:37:51 +02:00
Alessandro Ranellucci
9070ced329 Add wxWidgets version to debug output 2012-05-04 13:51:09 +02:00
Alessandro Ranellucci
d889639d49 Use the embedded progress bar for feedback about slicing 2012-05-04 13:00:34 +02:00
Alessandro Ranellucci
83b69b18d0 Status bar and progress bar for rotation and scaling 2012-05-04 12:56:15 +02:00
Alessandro Ranellucci
32f6d0143b Display print center coordinates and fix Export STL label alignment 2012-05-04 11:47:53 +02:00
Alessandro Ranellucci
b3714b4215 Preserve number of copies when splitting an object 2012-05-04 11:26:15 +02:00
Alessandro Ranellucci
f825f9063a Moved object manipulation buttons to a horizontal toolbar 2012-05-04 11:22:56 +02:00
Alessandro Ranellucci
36da196166 First attempts to move things to a vertical toolbar. Tooltips don't work on Cocoa, though 2012-05-04 10:41:24 +02:00
Alessandro Ranellucci
9398a1f6c2 Splitting unsplittable objects now results in a no-op 2012-05-04 10:17:36 +02:00
Alessandro Ranellucci
39f0c2f822 Renamed Dashboard to Plater (with Kliment's permission ;)) 2012-05-04 10:15:33 +02:00
Alessandro Ranellucci
dde71418d4 Bugfix: skip arc compensation when holes are not round 2012-05-02 16:28:47 +02:00
Alessandro Ranellucci
847cf3c5b8 Bugfix: when slicing the same plate multiple times, the results contained old and duplicate data 2012-05-02 15:20:05 +02:00
Alessandro Ranellucci
8e0e6107a3 Fixed regression causing manifoldness warnings (and sporadic bad slicing), introduced with recent memory optimizations 2012-05-02 15:12:24 +02:00
Alessandro Ranellucci
d164d13517 Bugfix: arc compensation code was filling some small holes 2012-05-01 19:19:31 +02:00
Alessandro Ranellucci
d59d4a2c55 Bugfix: infill every N layers was consuming large amounts of memory when used with models having sloping walls. #259 2012-05-01 18:51:47 +02:00
Alessandro Ranellucci
305b7a9c93 Don't try to display buttons icons if we're on an old WxWidgets 2012-05-01 16:49:34 +02:00
Alessandro Ranellucci
a7c36846c0 Require Math::Clipper 1.07 which includes the fix for #233 2012-05-01 15:36:07 +02:00
Alessandro Ranellucci
710275f7c0 Reverse perimeter order for holes. #214 2012-05-01 15:33:24 +02:00
Alessandro Ranellucci
da43cd70b2 Prevent tiny extrusion points. #323 2012-05-01 15:25:35 +02:00
Alessandro Ranellucci
f063d100f4 Fixed regression caused about recent memory optimizations 2012-05-01 15:12:34 +02:00
Alessandro Ranellucci
21893efa68 Removed a debugging statement left in, preventing hole compensation 2012-05-01 15:09:32 +02:00
Alessandro Ranellucci
d58a741d99 Put layer number in G-code comments. #327 2012-05-01 15:06:19 +02:00
Alessandro Ranellucci
7ee08be0b8 Allow [version], [timestamp], [year], [month], [day], [hour], [minute], [second] in filenames. #318 2012-05-01 15:02:33 +02:00
Alessandro Ranellucci
49ff9a0ebe Emit G92 E0 when in relative mode. #322 2012-05-01 14:49:41 +02:00
Alessandro Ranellucci
d8b8470d54 Retract before changing tool. #319 2012-05-01 14:44:52 +02:00
Alessandro Ranellucci
e74e740ba4 Button icons 2012-05-01 13:56:11 +02:00
Alessandro Ranellucci
055ea85252 Some spacing between buttons 2012-05-01 13:27:57 +02:00
Alessandro Ranellucci
0f3cbe6fa4 Bugfix: G-code errors with multiple objects 2012-05-01 13:18:01 +02:00
Alessandro Ranellucci
770b94cb30 Set Wx app icon 2012-05-01 12:58:47 +02:00
Alessandro Ranellucci
b457089a1e Bugfix: fatal error when using --debug 2012-05-01 12:09:46 +02:00
Alessandro Ranellucci
3ed5171d20 Take bottom layer speed ratio into account when estimating layer time. #334 2012-05-01 11:48:22 +02:00
Alessandro Ranellucci
94cfc1c05f Fixed regression preventing to load config files from GUI. #336 2012-05-01 11:46:17 +02:00
Alessandro Ranellucci
ee33d570d7 Use Douglas-Peucker simplification always and remove the inefficient parallel lines merging algorithm. #277 2012-05-01 11:41:08 +02:00
Alessandro Ranellucci
08efb15f4d Further memory savings 2012-05-01 11:32:22 +02:00
Alessandro Ranellucci
25b2cdc6d9 Merge pull request #337 from olasd/master 
[GUI] Arrange the new Dashboard icons into a grid
 2012-05-01 02:07:58 -07:00
Alessandro Ranellucci
a165ad4ecb Large memory saving and speed boost 2012-05-01 10:53:52 +02:00
Nicolas Dandrimont
3ed50f2f31 Make the Dashboard buttons a little nicer 2012-05-01 10:26:49 +02:00
Alessandro Ranellucci
61e257388a Button to split loaded objects 2012-05-01 00:30:46 +02:00
Alessandro Ranellucci
91d1b21c40 Use honeycomb pattern for support material 2012-04-30 23:50:38 +02:00
Alessandro Ranellucci
54e1d934a7 Fixed regression with support material 2012-04-30 23:36:49 +02:00
Alessandro Ranellucci
4962d310bf Stick the duplicate distance setting somewhere randomly, waiting for better place and naming 2012-04-30 23:30:06 +02:00
Alessandro Ranellucci
23309e1be0 Fixed warning 2012-04-30 23:24:01 +02:00
Alessandro Ranellucci
e24990badb Update preview grid and dimensions according to bed size setting 2012-04-30 22:34:41 +02:00
Alessandro Ranellucci
19a611f832 Add Quit menu item 2012-04-30 22:23:43 +02:00
Alessandro Ranellucci
4193b1777a New button for arbitrary rotation 2012-04-30 22:14:27 +02:00
Alessandro Ranellucci
3e92587824 Add a progress bar during STL loading 2012-04-30 21:49:44 +02:00
Alessandro Ranellucci
2e897ecf0d Multithreaded thumbnail generation 2012-04-30 20:59:14 +02:00
Alessandro Ranellucci
e41b8c7435 Round skirt in preview too 2012-04-30 18:54:36 +02:00
Alessandro Ranellucci
84d9368bf6 Bugfix: error on Honeycomb infill 2012-04-30 17:55:32 +02:00
Alessandro Ranellucci
9a397ed869 Trap warning about objects not fitting in the build area 2012-04-30 17:25:08 +02:00
Alessandro Ranellucci
2a067ae41f Export STL 2012-04-30 17:10:54 +02:00
Alessandro Ranellucci
d03925a18d New GUI with plating facilities 2012-04-30 14:56:01 +02:00
Alessandro Ranellucci
4bc49dcc5b Fixed regression throwing fatal error when using --duplicate-grid 2012-04-29 19:01:18 +02:00
Alessandro Ranellucci
17a4426358 Fixed regression throwing fatal error with honeycomb infill 2012-04-29 18:05:23 +02:00
Alessandro Ranellucci
ed4a5739f6 Multiple objects autoplating (--merge, from command line only) 2012-04-29 12:51:20 +02:00
Erkki Seppälä
10d4271c01 Fix leaking FileDialog by issuing Destroy to it after it has been used 
This also works around the bug in GTK in its file system tracking/file
open dialog that causes a crash when a file (in a directory it is tracking,
such as the previous directry where an STL was sliced from) is modified
with vim.

Steps to reproduce the bug:
1) Slice a file from the GUI
2) vim test.stl in the same directory
3) i hello ESC ZZ
4) if Slic3r didn't crash to a gtk assertion failure, jump to step 2
5) if still no luck, your gtk isn't broken. What version do you have?-)
 2012-04-18 17:22:38 +03:00
Alessandro Ranellucci
e7558ce16c Bugfix: wrong flow amount for solid layers. #317 2012-04-17 09:29:41 +02:00
Alessandro Ranellucci
07edf83990 Releasing 0.7.2 2012-04-16 20:43:46 +02:00
Alessandro Ranellucci
285caffa9c Omit G92 if No Extrusion 2012-04-16 20:06:53 +02:00
Alessandro Ranellucci
8d851c24a9 Increase the flow rate for support material 2012-04-16 14:18:07 +02:00
Alessandro Ranellucci
fc0fa0c738 Remove Rectilinear2 infill 2012-04-16 14:06:52 +02:00
Alessandro Ranellucci
96d5e513b8 Rename $Slic3r::resolution to $Slic3r::scaling_factor 2012-04-16 14:05:38 +02:00
Alessandro Ranellucci
d51ba94e8a Remove XXX from dependencies 2012-04-16 14:03:36 +02:00
Alessandro Ranellucci
356e750cf4 Bugfix: support material was oversimplifying the first outer perimeter. #314 2012-04-16 13:48:55 +02:00
Alessandro Ranellucci
0d910dec84 Don't require --duplicate-distance to be positive anymore 2012-04-16 11:58:01 +02:00
Alessandro Ranellucci
cb182b8bc2 Honeycomb infill. #300 2012-04-16 11:55:14 +02:00
Alessandro Ranellucci
0faebad4da Make new support material algorithm effective 2012-04-14 19:47:33 +02:00
Alessandro Ranellucci
9c991d15d1 Don't ask for confirmation (and reset values) when duplicate is set to 'no'. #311 2012-04-14 15:37:28 +02:00
Alessandro Ranellucci
c0ec8b5865 Bugfix: fatal error under certain circumstances introduced with the recent Boost implementation 2012-04-14 15:25:42 +02:00
Alessandro Ranellucci
1845abab70 Bugfix: warnings when trying to process bridges with no anchors 2012-04-12 10:30:54 +02:00
Alessandro Ranellucci
74c02e7aed added skirt to print size calculation for --duplicate 
Conflicts:

	lib/Slic3r/Print.pm
 2012-04-11 20:44:09 +02:00
Alessandro Ranellucci
0460830372 Merge pull request #310 from triffid/fix-total-x-length 
move duplicate stuff around a bit
 2012-04-11 10:34:41 -07:00
Michael Moon
757f8a2404 move duplicate stuff around a bit 2012-04-12 03:30:15 +10:00
Alessandro Ranellucci
1c6469fc25 Allow to use x as a separator for --print-center, --bed-size, --duplicate-grid 2012-04-11 18:18:01 +02:00
Alessandro Ranellucci
134595fc99 Validation for --duplicate-grid and --bed-size 2012-04-11 17:52:06 +02:00
Alessandro Ranellucci
0b29ad123e Honor duplication options for SVG export 2012-04-11 17:46:36 +02:00
Alessandro Ranellucci
e5abb0b9df Enable/disable duplication controls 2012-04-11 17:40:10 +02:00
Alessandro Ranellucci
e58ed195fd New --bed-size option 2012-04-11 16:30:58 +02:00
Alessandro Ranellucci
d96d0a9fbf New slic3r: namespace for SVG output 2012-04-11 16:10:51 +02:00
Alessandro Ranellucci
4ae551a424 Ditch --duplicate-x and --duplicate-y, add --duplicate-grid 2012-04-11 15:58:09 +02:00
Alessandro Ranellucci
63ff01764c Document --threads, -j and throw an error when it's used on a non-threaded perl 2012-04-10 16:26:56 +02:00
Alessandro Ranellucci
fc76104aa7 Merge branch 'boost-geometry' 2012-04-10 15:52:44 +02:00
Alessandro Ranellucci
a8adff53ca New implementation of support material 2012-04-09 22:06:30 +02:00
Alessandro Ranellucci
82a16ed8ee Merge branch 'triffid-duplicate' 2012-04-09 15:14:40 +02:00
Michael Moon
f2edfd1a76 initial implementation of algorithm for #249 
fix typo that put things in the wrong position

use int() builtin instead of POSIX::floor()

fix typo

use alternate method of creating local routines

remove aliases for new duplicate option

use coderefs for linear interpolate function, make binary insertion sort inline

add \n at end of die message regarding too many objects for print area

fix case where no duplication is done

fix whitespace according to slic3r coding style

assume 200x200 bed area if center is 0,0

Some cleanup to the autoarrange duplication logic
 2012-04-09 15:14:07 +02:00
Alessandro Ranellucci
64e669d893 Refactored parallelization code. #154 2012-04-09 13:53:13 +02:00
Alessandro Ranellucci
68b48fa807 Multithreaded mesh processing. #154 2012-04-09 12:29:47 +02:00
Alessandro Ranellucci
5bfe19a8b9 Huge speed Boost (pun intended). Also fixes a problem where infill was escaping perimeters sometimes (#305). 2012-04-09 11:04:32 +02:00
Alessandro Ranellucci
a800b97fdd Bugfix: no-extrusion was ignored 2012-04-08 21:27:38 +02:00
Alessandro Ranellucci
19dc69dd74 New icon 2012-04-07 20:45:59 +02:00
Alessandro Ranellucci
43ebaa9d94 Don't slow down travel moves. #293 2012-04-03 14:22:18 +02:00
Alessandro Ranellucci
965a4e1bfd Make sure all concentric fill loops are extruded ccw. #298 2012-04-03 14:11:12 +02:00
Alessandro Ranellucci
13e573a8e4 Only output M109 if there's none in user-supplied start G-code 2012-04-03 12:50:06 +02:00
Alessandro Ranellucci
0afb5ad9dd Bugfix: some holes were filled. #291 2012-04-02 11:40:12 +02:00
Alessandro Ranellucci
f380b1007d Add the coordinates of the first non-manifold edge to the warning message. #292 2012-03-31 19:15:30 +02:00
Alessandro Ranellucci
d791315b4a Bugfix: fatal error when generating skirt for layers having only two-point thin walls. #295 2012-03-31 18:32:53 +02:00
Alessandro Ranellucci
1355833cbf Use M109 for Makerbot bed control. #294 2012-03-31 18:24:12 +02:00
Alessandro Ranellucci
e3a9adae4d Bugfix: use P instead of S for Mach3 for M106 too. #286 2012-03-27 10:26:10 +02:00
Henrik Brix Andersen
d538382669 Use correct spelling for G-code. 2012-03-26 22:33:43 +02:00
Alessandro Ranellucci
2aa786c95f Bugfix: extrude_skirt() was assuming that a copy existed at 0,0 (not harmful but incorrect) 2012-03-26 19:47:21 +02:00
Alessandro Ranellucci
32c46f0ea3 SVG export 2012-03-26 17:57:54 +02:00
Alessandro Ranellucci
5bd16ffed6 Allow decimal values for skirt/duplicate distances and speeds. #283 2012-03-26 15:20:59 +02:00
Alessandro Ranellucci
4d71ca3071 Enable G0 automatically for Mach3. #266 2012-03-26 12:22:12 +02:00
Alessandro Ranellucci
1a06e35687 New option to specify G-code to be used at layer change. #279 2012-03-26 12:14:15 +02:00
Alessandro Ranellucci
bf964b5273 Allow perimeters = 0. #282 2012-03-26 11:32:59 +02:00
Erkki Seppälä
0ca7577392 Added a Reslicing-function to the File menu. 2012-03-12 19:52:23 +02:00
Alessandro Ranellucci
30df2342d4 UTF-8 characters not displayed correctly on Windows 2012-03-11 19:59:09 +01:00
Alessandro Ranellucci
0f5e2e3076 Throw an error if a user wants to print a 0mm layer 2012-03-11 16:58:15 +01:00
Alessandro Ranellucci
69942d2076 Bugfix: certain values of first layer height ratio caused slicing errors 2012-03-11 16:31:39 +01:00
Alessandro Ranellucci
64892c2203 Bugfix: fatal error on some models. #255 2012-03-10 23:49:24 +01:00
Alessandro Ranellucci
0e1d89376e Minor refactoring 2012-03-04 13:39:14 +01:00
Alessandro Ranellucci
6f9cefe001 Reduce computational complexity of make_loops() => speed boost 2012-03-04 13:32:20 +01:00
Alessandro Ranellucci
3cf5f86ce0 Avoid G92 for Mach3. #220 2012-03-04 11:49:04 +01:00
Alessandro Ranellucci
4a72c77150 Maximize fill/perimeter contact for line infill pattern 2012-03-04 11:45:45 +01:00
Alessandro Ranellucci
be9886eac3 Bugfix: fill escapes perimeters. #139 2012-03-04 11:26:11 +01:00
Alessandro Ranellucci
d0807aa807 Allow to use config options in start/end G-code 2012-03-03 23:29:08 +01:00
Alessandro Ranellucci
f2032686da Ensure fan is turned off at start if disable_fan_first_layers > 0 2012-03-03 23:18:02 +01:00
Alessandro Ranellucci
7892a84408 Refactoring and integrations to the bed temperature handling 2012-03-03 23:14:40 +01:00
Michael Moon
35e7877437 bed temperature handling. TODO: gui elements 2012-03-03 23:08:50 +01:00
Alessandro Ranellucci
8566b4f910 Separate the Slice button a bit 2012-03-03 22:53:12 +01:00
Alessandro Ranellucci
5c79024215 Revert "Made the UI look quite a bit nicer (OS X 10.7 tested)." 
This reverts commit 266f7799dd.

Conflicts:

	lib/Slic3r/GUI/SkeinPanel.pm
 2012-03-03 22:50:08 +01:00
Alessandro Ranellucci
2c16509e8a Slowdown wasn't triggered when fan_below_layer_time was set to zero. #237 2012-03-03 22:28:44 +01:00
Alessandro Ranellucci
06c22c9db3 New --fan-always-on option. #241 #110 2012-03-03 22:21:30 +01:00
Alessandro Ranellucci
c7006fed26 Bugfix: an awful _BRIDGE_FAN_END string was sometimes left in the output. #245 2012-03-03 22:16:38 +01:00
Alessandro Ranellucci
2ff3ab1faf Remove G0 from GUI until a firmware implements it 2012-03-03 21:37:10 +01:00
Alessandro Ranellucci
b5cba48e55 Put the relative E checkbox back in the GUI and disable M82/M83 for MakerBot 2012-03-03 21:27:33 +01:00
Alessandro Ranellucci
e8c64924db Some GUI fixes after the recent contributions 2012-03-03 21:25:26 +01:00
Alessandro Ranellucci
6b31563b70 Merge pull request #236 from sfcgeorge/improved-ui 
Made the UI look quite a bit nicer (OS X 10.7 tested).
 2012-03-03 12:04:35 -08:00
Simon George
266f7799dd Made the UI look quite a bit nicer (OS X 10.7 tested). 
* Added link to website for updates
* Moved 'Slice…' button to the right as this more logically follows the
user's flow through the application
* Moved version information to the middle right under the App name (on
OS X anyway) as it is clearer what the version is referring to
* Added spacing between the buttons
* Removed colon after 'version' as this is the UI convention in about
boxes
* Changed 'Load' to 'Open' as this is the more commonly used term
* Truncated 'Configuration' to 'Config' to save space, and I believe it
is still clear what it means
* Added open and save config to File menu as this is more conventional
location
* Simplified some wording
* Rephrased the tabs to be more succinct, I believe they still make
sense
* Fixed a spelling
* Replaced '…' with proper ellipses character
 2012-02-28 23:04:19 +00:00
Alessandro Ranellucci
f0e434f8c1 Fix typo in previous commit and in config options. #234 2012-02-28 22:04:48 +01:00
Alessandro Ranellucci
0520d1645b Bugfix: retraction wasn't triggered when moving between copies. #232 2012-02-28 21:55:32 +01:00
Henrik Brix Andersen
ca49965210 Fail silently if Growl was stopped after Slic3r was started 2012-02-26 19:44:15 +01:00
Alessandro Ranellucci
9332319e10 Fail silently if Growl::GNTP fails 2012-02-26 19:29:25 +01:00
Alessandro Ranellucci
f451bb2bd0 Use XML::SAX::PurePerl instead of XML::SAX::ExpatXS for now 2012-02-26 18:17:23 +01:00
Alessandro Ranellucci
b9f30d8378 Bugfix: AMF files with no materials were not successfully parsed 2012-02-26 16:22:45 +01:00
Alessandro Ranellucci
79bc2240fb Use first layer temperature for M109 too 2012-02-26 15:09:28 +01:00
Alessandro Ranellucci
dccd7d19a9 First layer temperature. #134 2012-02-26 14:54:38 +01:00
Alessandro Ranellucci
f1f0545209 Bugfix: --extrusion-axis didn't accept an argument 2012-02-26 11:33:58 +01:00
Alessandro Ranellucci
554534fcad Optimization 2012-02-26 11:18:42 +01:00
Alessandro Ranellucci
be0e1a6e0b Bugfix: fill escapes perimeters. However, we keep it disabled. #139 2012-02-25 22:41:53 +01:00
Alessandro Ranellucci
c98f6734c7 Code optimization 2012-02-25 22:18:07 +01:00
Alessandro Ranellucci
170d29a789 New --cooling option and checkbox to enable/disable fan and cooling control 2012-02-25 21:56:36 +01:00
Alessandro Ranellucci
70e69be60a Bugfix: support material was generated under most bridges 2012-02-25 21:39:01 +01:00
Alessandro Ranellucci
1d0a852679 Cooling and fan control. #110 2012-02-25 21:01:00 +01:00
Alessandro Ranellucci
f4fde54bf3 Add extrusion multiplier to gcode comments. #222 2012-02-25 19:24:46 +01:00
Alessandro Ranellucci
9f5e48bd2c Wrong optimization 2012-02-25 17:40:30 +01:00
Alessandro Ranellucci
959230b099 Refactoring: moved Slic3r::STL and Slic3r::AMF to Slic3r::Format::* 2012-02-25 17:35:25 +01:00
Alessandro Ranellucci
2a86932cfe Slight code optimizations 2012-02-25 17:16:55 +01:00
Alessandro Ranellucci
848bf91244 Multithreaded support material generation 2012-02-25 16:51:08 +01:00
Alessandro Ranellucci
044053a3f7 Bugfix: medial axis was not using new Douglas-Peucker implementation 2012-02-25 16:27:33 +01:00
Alessandro Ranellucci
cc695c6c22 Support material: refactoring 2012-02-25 16:23:41 +01:00
Alessandro Ranellucci
a24ffee2aa New polygon_is_convex() function 2012-02-25 16:14:59 +01:00
Alessandro Ranellucci
2d130061ed Increase small holes threshold to holes having a 6.5mm radius 2012-02-25 16:14:28 +01:00
Alessandro Ranellucci
eba7c10018 Faster support generation. Includes a new implementation of the Douglas-Peucker algorithm 2012-02-25 14:46:21 +01:00
Alessandro Ranellucci
94e673e050 Backwards compatibility for people using relative E distances on RepRap firmwares 2012-02-24 23:12:16 +01:00
Alessandro Ranellucci
79aead7c9d Experimental hole compensation 2012-02-24 20:13:17 +01:00
Henrik Brix Andersen
f55a2b91a3 Set Wx application name. 2012-02-23 21:51:45 +01:00
Alessandro Ranellucci
c3fc6ee66b Fix regression introduced with f2e1fe5241 2012-02-21 20:16:03 +01:00
Owen Stenseth
c539a8d9e0 Support skeining multiple files from the command line. Update the status output to include input and export filenames. 2012-02-21 09:26:54 -07:00
Alessandro Ranellucci
aa7a5d6069 Removed warning 2012-02-21 14:31:51 +01:00
Alessandro Ranellucci
f2e1fe5241 Do hole perimeters in ccw direction too 2012-02-21 14:29:58 +01:00
Alessandro Ranellucci
b6bffacb9d Parse and write multi-material AMF files. Convert multiple STL files into a single multi-material AMF 2012-02-20 16:43:45 +01:00
Alessandro Ranellucci
aa98a9deb2 Mark the Slice... button as the default one (just cosmetics) 2012-02-20 12:52:40 +01:00
Alessandro Ranellucci
555c23069d New --post-process option. Includes some cleaning of the STDOUT messages 2012-02-20 12:50:05 +01:00
Alessandro Ranellucci
ae35df716f Little refactoring, new TriangleMesh->align_to_origin method 2012-02-20 11:47:21 +01:00
Alessandro Ranellucci
615bcb27dd New --gcode-flavor option. extrusion_axis, use_relative_e_distances options hidden and implied. #158 2012-02-20 11:44:30 +01:00
Alessandro Ranellucci
23156f0abe Fix slicing error. #180 2012-02-19 17:18:50 +01:00
Alessandro Ranellucci
27a6b3a851 Bugfix: fatal error when medial axis produced poor results. #178 2012-02-19 17:11:18 +01:00
Alessandro Ranellucci
94a2585b97 Dual extruder for support material 2012-02-19 17:02:49 +01:00
Alessandro Ranellucci
375829204f Removed the bogus hole code which is not necessary anymore. Also fixes #160 2012-02-19 16:02:58 +01:00
Alessandro Ranellucci
776d985b26 New AMF-to-STL and STL-to-AMF converters 2012-02-19 15:45:27 +01:00
Alessandro Ranellucci
79ebb13bdb Parse AMF 2012-02-19 15:14:54 +01:00
Alessandro Ranellucci
dba6197935 Failed to remove acceleration from GUI 2012-02-19 12:27:44 +01:00
Alessandro Ranellucci
eb2c24ecfb Removed acceleration from the GUI (too experimental for now) 2012-02-19 12:15:58 +01:00
Alessandro Ranellucci
cf6f303256 Add checkbox for support material in the GUI 2012-02-19 12:08:08 +01:00
Alessandro Ranellucci
7b67fae686 Support material 2012-02-19 12:03:36 +01:00
Alessandro Ranellucci
e0e2023a5a Duplication is now performed on generated toolpaths instead of mesh (speed boost). #179 2012-02-19 10:48:58 +01:00
Alessandro Ranellucci
90c6ed3b20 Merge pull request #209 from henrikbrixandersen/master 
Use SI units consistently.
 2012-02-19 00:34:17 -08:00
Alessandro Ranellucci
4f72de3873 Check that bridge_flow_ratio > 0 2012-02-19 09:32:16 +01:00
Henrik Brix Andersen
c02c2d943c Merge remote-tracking branch 'upstream/master' 2012-02-18 22:42:08 +01:00
Henrik Brix Andersen
c20fd8a596 Use SI units consistently. 2012-02-18 22:36:13 +01:00
Alessandro Ranellucci
a9e7204fc6 New slicing algorithm based on a topological approach rather than numeric. It should be much more robust 2012-02-18 20:36:14 +01:00
Alessandro Ranellucci
16850b63ed Removed some useless and manifoldness warnings 2012-02-17 16:31:39 +01:00
Alessandro Ranellucci
94c1b043e3 Small fix/improvement for the vertex indexing 2012-02-17 14:58:13 +01:00
Alessandro Ranellucci
f814ccf062 Refactoring: use indexed vertices 2012-02-17 13:56:17 +01:00
Henrik Brix Andersen
80bd434e5e Remove last remains of close-after-slicing option. 2012-02-16 22:52:57 +01:00
Alessandro Ranellucci
660eedfa5b Added a couple unit tests 2012-02-15 12:04:10 +01:00
Alessandro Ranellucci
68f001a7de Mark acceleration settings as experimental and add a M501 command at the end of the print if acceleration control is enabled 2012-02-14 21:57:53 +01:00
Alessandro Ranellucci
0deee20ade Bugfix: bad syntax in last commit. #202 2012-02-13 18:02:54 +01:00
Alessandro Ranellucci
dbb40095b7 Bugfix: fatal error when offsetting a surface results in more than one expolygon. #201 2012-02-12 23:44:24 +01:00
Alessandro Ranellucci
ca704c4846 Merge pull request #200 from jreinhardt/master 
Small GUI fix
 2012-02-12 14:35:03 -08:00
Alessandro Ranellucci
419b94e587 Allow Unicode characters in config.ini. #199 2012-02-12 23:33:39 +01:00
Johannes Reinhardt
2b979fb14c added missing units in GUI 2012-02-12 22:42:03 +01:00
Alessandro Ranellucci
74c71b4ef2 Acceleration control. #185 2012-02-10 14:53:44 +01:00
Alessandro Ranellucci
ad8c9d4ea1 Bugfix: model with rounded walls had small useless infill regions. #177 2012-02-10 14:42:54 +01:00
Alessandro Ranellucci
7893480fd7 Add checkbox for G0 in the GUI. #51 2012-02-06 21:17:01 +01:00
Alessandro Ranellucci
ddb0330fc1 Validate configuration before saving from GUI 2012-02-06 16:52:11 +01:00
Henrik Brix Andersen
121895d3fc Add support for notes field in configuration profiles. #130 2012-02-05 20:55:17 +01:00
Henrik Brix Andersen
4dd33c6b05 Ask for confirmation when slicing more than one copy. #165 2012-02-05 16:43:44 +01:00
Henrik Brix Andersen
cc040df42a Do not display the progress dialog as an application-wide modal dialog; modal to the parent window is enough. #189 2012-02-05 14:23:15 +01:00
Henrik Brix Andersen
cec660c263 Fallback on last used config path if no last skein path is set and vice versa. 2012-02-03 20:22:45 +01:00
Henrik Brix Andersen
b4dc299be0 Use separate variables for last used config directory and last used skein directory. #187 2012-02-03 19:57:49 +01:00
Henrik Brix Andersen
35be7f013b Add Growl support. #62 2012-02-03 00:30:35 +01:00
Alessandro Ranellucci
3e65af7457 Revert "New First layer flow ratio option. #182" 
This reverts commit 99ef0865bb.
 2012-01-30 14:51:05 +01:00
Alessandro Ranellucci
99ef0865bb New First layer flow ratio option. #182 2012-01-30 14:25:14 +01:00
Alessandro Ranellucci
eb33c03926 Bugfix: flow wasn't adjusted for first layer according to its height setting. #182 2012-01-30 14:03:12 +01:00
Alessandro Ranellucci
4a9672bd88 Use about 40% less memory 2012-01-28 21:52:31 +01:00
Alessandro Ranellucci
c7b650b001 Require Math::Clipper 1.03 for thread-safety 2012-01-28 16:47:03 +01:00
Alessandro Ranellucci
8b777e9d70 Multithreaded infill. #154 2012-01-28 16:27:52 +01:00
Alessandro Ranellucci
669341cd11 New utility script to split STL plates into individual STL files 2012-01-28 15:05:42 +01:00
Alessandro Ranellucci
2151457d9e Bugfix: small perimeter speed was applied to all holes too, regardless of their size. #175 2012-01-27 14:43:12 +01:00
Alessandro Ranellucci
4ade11b26e Some minor fixes related to polyline refactoring 2012-01-27 14:29:06 +01:00
Alessandro Ranellucci
5bc3f2cfa5 Allow portability of config files between Unix and Windows 2012-01-22 20:10:23 +01:00
Alessandro Ranellucci
debdd164e2 Bugfix: fatal error and warnings removed when cleaning some dirty layers 2012-01-21 18:44:24 +01:00
Alessandro Ranellucci
00c6287488 Bugfix: fill escapes perimeters. #139 2012-01-21 17:11:14 +01:00
Alessandro Ranellucci
a4194554c9 Write single wall width (extrusion width) to the G-code file 2012-01-21 17:02:55 +01:00
Alessandro Ranellucci
331ede52b8 Do all shells for a hole before moving onto the next one. #88 2012-01-21 16:35:33 +01:00
Alessandro Ranellucci
63972a3a35 Some more overlap 2012-01-21 16:35:23 +01:00
Alessandro Ranellucci
7636b67871 Fix comments in Perimeter.pm 2012-01-21 12:00:12 +01:00
Alessandro Ranellucci
f1b1454b36 Loops were not closing well 2012-01-21 11:51:31 +01:00
Alessandro Ranellucci
0e23f20df1 Poor overlap between perimeters and infill 2012-01-21 11:48:03 +01:00
Alessandro Ranellucci
a0ebee2ca3 Warn if no layers were detected 2012-01-21 11:34:03 +01:00
Alessandro Ranellucci
c5b6787a19 Print the number of bogus holes to debug output 2012-01-21 11:24:26 +01:00
Alessandro Ranellucci
92cdaf2f2d Retract at end of print 2012-01-20 14:48:51 +01:00
Alessandro Ranellucci
d1ad02cc71 Removed one more fatal error caused by recent refactoring 2012-01-18 19:28:49 +01:00
Alessandro Ranellucci
bba91fc0a5 Some better debug messages and a note about self-intersecting polygons. #160 2012-01-18 18:59:34 +01:00
Alessandro Ranellucci
478775ef1c Add checkbox to GUI to enable G-code comments 2012-01-18 10:46:39 +01:00
Alessandro Ranellucci
f419cf37d1 Use solid print speed for internal solid layers too. #167 2012-01-18 10:07:42 +01:00
Alessandro Ranellucci
59cd027a68 Temporarily disable small gap filling as it requires a fix not to slow down everything 2012-01-13 18:24:08 +01:00
Alessandro Ranellucci
90d10b24a8 Fill gaps using medial axis detection 2012-01-12 22:05:35 +01:00
Alessandro Ranellucci
a3a9cf5749 Yet other things not changed when refactored. #163 2012-01-12 10:48:18 +01:00
Alessandro Ranellucci
b605381132 Bugfix: more errors in infills after refactoring. #162 2012-01-11 23:19:56 +01:00
Alessandro Ranellucci
8735ac3c57 Bridges now have higher priority than other solid surfaces. #140 2012-01-11 23:16:09 +01:00
Alessandro Ranellucci
5fefcc0dc4 More fixes after refactoring 2012-01-11 23:14:59 +01:00
Alessandro Ranellucci
468f09d3c1 Bugfix: small surfaces where still infilled even with fill_density = 0 2012-01-11 22:38:06 +01:00
Alessandro Ranellucci
0184b0f205 Fixed many little things that were not updated along with recent large refactoring. #157 #144 2012-01-11 20:13:26 +01:00
Alessandro Ranellucci
8ed91a8ec4 Very large refactoring. Ditched Slic3r::Polyline::Closed and reorganized geometric classes. 2011-12-30 19:59:51 +01:00
Alessandro Ranellucci
2def6a9787 Bugfix: medial axis code threw fatal errors sometimes 2011-12-30 18:58:27 +01:00
Alessandro Ranellucci
4b2bd7f779 Bugfix: wrong month number in output 2011-12-30 18:57:58 +01:00
Alessandro Ranellucci
f08ebe97b2 Bugfix: fatal error for some models and thin walls not considered for skirt 2011-12-30 18:51:48 +01:00
Alessandro Ranellucci
1c7564e4a4 Thin walls. #24 2011-12-30 17:17:37 +01:00
Alessandro Ranellucci
62ee79f0c9 Remember last config file path when loaded from CLI too 2011-12-26 19:45:01 +01:00
Alessandro Ranellucci
d6dcb35237 Remember the filename and path of the last config file loaded, to use as default for saving 2011-12-26 19:06:57 +01:00
Alessandro Ranellucci
f9446b9c6e Cleanup the --output-filename-format implementation. #53 #137 2011-12-26 17:25:13 +01:00
Clarence Risher
1071b556cb second draft implementation of output_filename_format 2011-12-26 04:20:45 -05:00
Alessandro Ranellucci
342823fdf3 Bugfix: fatal error in arc detection code. #133 2011-12-25 13:01:48 +01:00
Alessandro Ranellucci
a86bc260e7 Bugfix: some islands having ho holes and contained in holes themselves were ignored 2011-12-24 11:01:28 +01:00
Alessandro Ranellucci
ab0300bb70 Bugfix for recent solid infill adjustment math, to take float math into account 2011-12-22 18:55:18 +01:00
Alessandro Ranellucci
75cbe879b7 New "Slice and save as..." command to specify output filename. #53 2011-12-22 17:38:37 +01:00
Alessandro Ranellucci
1cc28844a5 Merge pull request #131 from sparr/master 
this fixes a bug with arc lengths as discussed on IRC, including two unit tests
 2011-12-22 03:16:16 -08:00
Clarence Risher
a81e8c4afc correct length calculation for clockwise arcs 2011-12-22 06:10:54 -05:00
Alessandro Ranellucci
55045e0437 Limit skirt height to the print height. #128 2011-12-22 11:57:26 +01:00
Alessandro Ranellucci
98a8c64ed7 Extended (and fixed) unit testing to track down (and fix) an issue caused by floating point math that reversed some holes into contours when they should actually be ignored 2011-12-22 11:24:46 +01:00
Alessandro Ranellucci
fbea5dae8f Bugfix: consider holes when searching for supporting surfaces 2011-12-20 22:37:59 +01:00
Alessandro Ranellucci
caf41f07dd Output required filament length and volume to command line and to the gcode file itself 2011-12-20 15:29:15 +01:00
Alessandro Ranellucci
627e1b32e2 Add Slic3r version to gcode comment 2011-12-20 14:20:39 +01:00
Alessandro Ranellucci
5e850557d4 Added note to self about using the skeletonization algorithm to fill small gaps 2011-12-19 13:00:42 +01:00
Alessandro Ranellucci
e2a5c2119f Bugfix: some holes were skipped 2011-12-19 12:09:14 +01:00
Alessandro Ranellucci
4af295bce3 Bugfix: very wrong infill for low density regions. #127 2011-12-19 09:55:03 +01:00
Alessandro Ranellucci
65a018f156 Move the parsing warning to the end, so that it won't block slicing 2011-12-18 13:43:31 +01:00
Alessandro Ranellucci
f20209ce01 Add spacing between adjacent surfaces to avoid mini blobs 2011-12-18 13:38:45 +01:00
Alessandro Ranellucci
e5619ee543 Bugfix: not all paths were closed correctly due to float rounding 2011-12-18 11:53:15 +01:00
Alessandro Ranellucci
47bbe18de2 Additional check to return a friendly error when binary STL is not valid 2011-12-18 10:50:55 +01:00
Alessandro Ranellucci
eca6d0b6d0 Adjust flow for solid surfaces when using concentric infill too. #120 2011-12-17 20:29:06 +01:00
Alessandro Ranellucci
6a3eeef83b Removed warnings for concentric infill. #121 2011-12-17 19:59:31 +01:00
Alessandro Ranellucci
f73febff7a Always start concentric infill from the center. #120 2011-12-17 19:56:56 +01:00
Alessandro Ranellucci
d63eabcfa5 Clip less from loops to avoid gaps 2011-12-17 19:54:35 +01:00
Alessandro Ranellucci
1e6ecd9eab Corrections to math. Threads are not always rectangles with semicircles. Better calculation of overlap. 2011-12-17 19:52:34 +01:00
Alessandro Ranellucci
cd0fd80a69 Restore better perimeter/infill overlap for solid surfaces 2011-12-16 18:37:43 +01:00
Alessandro Ranellucci
8e04d763f4 Don't increase flow for overlapping purposes when bridging 2011-12-16 10:53:22 +01:00
Alessandro Ranellucci
f5eb4f03e1 Skirt can be disabled by either setting skirts to 0 or skirt-height to 0 2011-12-16 09:55:13 +01:00
Alessandro Ranellucci
172253cfd7 Always use rectilinear infill for internal-solid surfaces 2011-12-15 22:05:15 +01:00
Alessandro Ranellucci
8e06a4f6f2 Bugfix: fatal error when using concentric infill 2011-12-15 21:46:29 +01:00
Alessandro Ranellucci
b422537cc4 Bugfix: do not die when no layers are detected at all 2011-12-15 20:36:46 +01:00
Alessandro Ranellucci
18cfc15ead Restored a little overlap between perimeters and infill (we're only explicitely overlapping in the direction of infill lines, because side overlap is handled by the flow logic in Extruder.pm) 2011-12-15 20:21:34 +01:00
Alessandro Ranellucci
2e013e72e8 Bugfix: models located very far from XYZ origin were incorrectly placed on the print area 2011-12-15 19:40:32 +01:00
Alessandro Ranellucci
40d06a6e11 Erorr in last commit about automatic extrusion width. #112 2011-12-15 12:50:02 +01:00
Alessandro Ranellucci
156a1deb0a Limit automatic extrusion width to be <= 1.2 * nozzle_diameter (Triffid's way). #112 2011-12-15 09:33:42 +01:00
Alessandro Ranellucci
d346bc02cc Comments are now disabled by default, new --gcode-comments option to enable them 2011-12-14 19:49:21 +01:00
Alessandro Ranellucci
3d213069a6 Bugfix: 100% overlap between perimeter and infill. #118 2011-12-14 19:40:18 +01:00
Alessandro Ranellucci
b9d01a32e5 Merge branch 'new-math' 2011-12-14 16:12:05 +01:00
Alessandro Ranellucci
048f7ca468 Adjusted flow width for solid infills was ignored 2011-12-14 11:35:19 +01:00
Alessandro Ranellucci
4bee1a12b8 Take overlap into account for external dimensions 2011-12-14 11:21:43 +01:00
Alessandro Ranellucci
ca5dfc05e7 Accept STL files with spaces at the end of vertex lines. #119 2011-12-14 10:29:08 +01:00
Alessandro Ranellucci
569e737ae1 Only connect infill edges when not doing solid surfaces 2011-12-13 17:36:03 +01:00
Alessandro Ranellucci
56691c1dea Model extrusion threads as rectangles with semicircles at the end. Remove overlap_ratio setting. #109 #112 2011-12-13 17:34:31 +01:00
Alessandro Ranellucci
869cb48c1a Merge branch 'master' of github.com:alexrj/Slic3r 2011-12-12 17:35:18 +01:00
Alessandro Ranellucci
3c2b2cfef2 Bugfix: duplicate options did not work correctly for copies > 2. #113 2011-12-12 17:32:45 +01:00
Richard Goodwin
557afcc4b1 Added scale to settings output 2011-12-11 15:32:47 -06:00
Alessandro Ranellucci
0ebd8eb8a9 Don't die when config has unknown options. #108 2011-12-10 10:39:07 +01:00
Alessandro Ranellucci
c957c27367 Remember last opened directory. #106 2011-12-09 14:07:50 +01:00
Alessandro Ranellucci
b92ba67272 Workaround for a WxWidgets bug that clips the overlap_ratio label on Mac 2011-12-08 22:06:53 +01:00
Alessandro Ranellucci
0a74e068a3 Merge branch 'infill-overlap' 2011-12-08 10:53:24 +01:00
Alessandro Ranellucci
d9a70ea80d Customizable overlap ratio (it defaults to 0.15 now) 2011-12-08 10:53:07 +01:00
Alessandro Ranellucci
d813aea59a Don't slow down retractions on bottom layer. #101 2011-12-08 10:28:23 +01:00
Alessandro Ranellucci
1f64a01ed4 Remove empty layers from bottom. They could be caused by little contact with the print bed, resulting in the need of thin walls. While thin walls will be supported one day, it's still not optimal to have so little contact on bottom layer(s), so we remove such layers. #96 2011-12-08 10:25:19 +01:00
Alessandro Ranellucci
99c1facec6 Bugfix: division by zero when nothing in a single layer could be parsed. #100 2011-12-07 20:18:12 +01:00
Alessandro Ranellucci
525855dc7d Bugfix: fatal error when combining infills. #96 2011-12-07 20:15:08 +01:00
Richard Goodwin
3ced3ee91f Fixed bolding and font issues on Windows 2011-12-06 15:36:42 -06:00
Alessandro Ranellucci
313f77ee59 Bugfix: removed error when filling small regions 2011-12-05 19:54:19 +01:00
Alessandro Ranellucci
2ba513bdb2 Bugfix: after recent changes, objects had slight dimension errors. #56 2011-12-05 18:48:48 +01:00
Alessandro Ranellucci
3d0cde2fce Fixed regression. The repair algorithm was not working after recent changes. Releasing 0.5.5b. #16 #28 2011-12-05 13:01:02 +01:00
Alessandro Ranellucci
b8a5d5a208 Bugfix: fatal error on many models. Releasing 0.5.5a. #92 #93 2011-12-05 12:15:52 +01:00
Alessandro Ranellucci
53bc9c7421 Customizable speed for small perimeters. #60 2011-12-04 20:50:03 +01:00
Alessandro Ranellucci
ea254588f7 More tolerance for config files 2011-12-04 20:41:17 +01:00
Alessandro Ranellucci
28a89c70c9 New bridge flow rate multiplier option. #85 2011-12-04 20:29:21 +01:00
Alessandro Ranellucci
3ac9dd513b Add first layer height ratio option to the GUI 2011-12-04 19:17:42 +01:00
Alessandro Ranellucci
b79ae44e3d Recent changes made Slic3r less tolerant with dirty STL files. Now we are able again to slice Prusa parts. #16 2011-12-04 19:10:43 +01:00
Alessandro Ranellucci
eb64cc4965 More fixes for bridges. #58 2011-12-04 18:37:37 +01:00
Alessandro Ranellucci
d056535bd8 Further corrections to the bridge angle detection algorithm. #58 2011-12-04 17:19:03 +01:00
Alessandro Ranellucci
0aff5fab24 Connect infill segments and adjust spacing and flow rate to fill the area completely without leaving gaps. #89 2011-12-04 16:24:46 +01:00
Alessandro Ranellucci
4fe340cc56 Many fixes to the bridge direction detection algorithm and other things. #58 2011-12-03 18:31:31 +01:00
Alessandro Ranellucci
792960aae1 Slic3r should now be able to detect optimal bridging direction for any kind of bridge. #58 2011-12-02 23:35:39 +01:00
Alessandro Ranellucci
5375f5fef4 Mark important settings in bold 2011-12-02 17:02:36 +01:00
Alessandro Ranellucci
52c9897eda New --extrusion-axis option; removed --no-extrusion 2011-12-01 22:34:21 +01:00
Alessandro Ranellucci
830965fc0b Note used settings in exported gcode. #52 2011-12-01 22:20:48 +01:00
Alessandro Ranellucci
aab85a4e27 Bugfix: unable to read back config file if start or end gcode was empty. #84 2011-12-01 22:06:07 +01:00
Alessandro Ranellucci
e99c9f9e5f Options on command line now override config. Also, "feed rate" was renamed to "speed" everywhere. #77 2011-12-01 22:04:23 +01:00
Alessandro Ranellucci
2a02d26ca5 Fixed regression: fill density = 0 was preventing extra solid layers. #75 2011-12-01 21:15:02 +01:00
Alessandro Ranellucci
f7a9c9be63 Bugfix: sometimes holes were detected as contours 2011-12-01 20:57:38 +01:00
Alessandro Ranellucci
133f3a0495 Bugfix: Clipper error occurred under certain circumstances 2011-12-01 19:40:45 +01:00
Alessandro Ranellucci
b03afc7f1c Bugfix: some bridges were not detected correctly. #57 2011-11-30 20:32:28 +01:00
Alessandro Ranellucci
52270d6b95 Bugfix: extrusion width ratio gave wrong flow rate under certain circumstances. #80 2011-11-30 18:18:17 +01:00
Alessandro Ranellucci
71c359bb29 Cleaning recent changes 2011-11-30 17:48:00 +01:00
Alessandro Ranellucci
42383dec84 Warn about models with overlapping or intersecting facets but try to repair wrong layers. #16 2011-11-30 16:28:09 +01:00
Alessandro Ranellucci
d51a37a0ae Refactoring: moved slicing code to new TriangleMesh class, leaving in STL just what's needed to read that particular input format. Slic3r will now warn if model is not manifold. #16 2011-11-30 16:07:31 +01:00
Michael Moon
729905d342 allow solid fill layers to be zero 2011-11-30 12:51:34 +11:00
Alessandro Ranellucci
2970e31540 Bugfix: some bridges being very close could lead to overlapping infill 2011-11-29 11:36:52 +01:00
Alessandro Ranellucci
d168ecbb4e Bugfix: fill density = 0 was preventing generation of extra solid layers. #75 2011-11-29 10:15:50 +01:00
Alessandro Ranellucci
248ed8589a Bugfix: error when concentric infill. #73 2011-11-28 22:52:35 +01:00
Alessandro Ranellucci
92e86a2259 Bugfix: plate was lifted even when retracting for Z change 2011-11-28 19:59:39 +01:00
Alessandro Ranellucci
3ad9ed74ae New --solid-infill-feed-rate option. #68 2011-11-28 19:11:26 +01:00
Alessandro Ranellucci
975387d953 New --bridge-feed-rate option. #68 2011-11-28 18:37:53 +01:00
Alessandro Ranellucci
4cdd0f6fd0 Bugfix: sparse and wrong infill was generated for objects with null fill density. Also fixed a division by zero. 2011-11-27 10:12:44 +01:00
Alessandro Ranellucci
22551b64de Bugfix: a recent change broke all options having a zero value 2011-11-26 22:43:12 +01:00
Alessandro Ranellucci
7a5af293a8 Mark slow infill patterns as slow. #20 2011-11-26 22:41:23 +01:00
Alessandro Ranellucci
8ce2c23e52 Bugfix: hard errors when extrusion width was left empty. 2011-11-26 20:51:04 +01:00
Alessandro Ranellucci
8e7d00bb34 Avoid unnecessary retractions during infill. #29 2011-11-26 17:01:00 +01:00
Alessandro Ranellucci
72d7e1a5de Don't update progress bar with wxWidgets 2.9.0 and 2.9.1 2011-11-26 16:52:10 +01:00
Alessandro Ranellucci
bed502af3c Make the progress bar determinate and output status description. #31 2011-11-26 16:19:30 +01:00
Alessandro Ranellucci
951778439a Bugfix: recent changes broke the "infill every layers" option which didn't alternate infill direction correctly. #70 2011-11-26 15:21:15 +01:00
Alessandro Ranellucci
afd8e0a1bd Bugfix: setting temperature to zero didn't remove it from output 2011-11-26 15:11:11 +01:00
Alessandro Ranellucci
0ab1fd4c19 concentric - new superfast infill pattern 2011-11-26 10:38:45 +01:00
Alessandro Ranellucci
f3b689d4e0 Bugfix: infill every 'n' layers was broken after recent changes 2011-11-25 18:16:31 +01:00
Alessandro Ranellucci
25c85aada5 Renamed "filament packing density" to "extrusion multiplier". Same values. #4 2011-11-25 11:15:20 +01:00
Alessandro Ranellucci
3c0ea0b57f New --extrusion-width-ratio option. #8 2011-11-25 11:10:35 +01:00
Alessandro Ranellucci
47d347e1b2 Revert "Disable retraction when moving over infill space. #29" 
This reverts commit d6ed9c6f34.
 2011-11-24 12:53:09 +01:00
Alessandro Ranellucci
8598b66b0a Large refactoring. Cleaner logic, smaller memory footprint. 2011-11-23 12:29:27 +01:00
Alessandro Ranellucci
13ef24b5eb Fixes, improvements and refactoring for bridges and solid surfaces. 2011-11-23 09:49:39 +01:00
Alessandro Ranellucci
d13a0e2503 Bugfix: no top surfaces when they were too close to bridges 2011-11-22 21:45:05 +01:00
Alessandro Ranellucci
048410ac52 Bugfix: some infill lines extruded outside objects when using 45° infill angle. #65 2011-11-22 20:35:05 +01:00
Alessandro Ranellucci
84d9f5fd9d Bugfix: some regions near bridges were left blank. #58 2011-11-21 21:05:00 +01:00
Alessandro Ranellucci
36e1ea0caa Make sure bridges don't overlap. #58 2011-11-21 16:35:10 +01:00
Alessandro Ranellucci
74786185e4 Don't die on non-manifold models, after having tried the slower detection algorithm too. #16 2011-11-21 16:09:13 +01:00
Alessandro Ranellucci
00beb7e118 Merge branch 'new-bridges' 2011-11-21 12:49:41 +01:00
Alessandro Ranellucci
d6ed9c6f34 Disable retraction when moving over infill space. #29 2011-11-21 12:37:12 +01:00
Alessandro Ranellucci
bde3c11e82 Fixes to the new bridging algorithm. It appears to be working fine now 2011-11-20 22:09:59 +01:00
Alessandro Ranellucci
ed9b4e829c Add a M109 for temperature control 2011-11-19 17:37:04 +01:00
Alessandro Ranellucci
6e02c8f117 Renamed perimeter_offsets to perimeters 2011-11-19 17:36:44 +01:00
Alessandro Ranellucci
4a9fc942cb Add a M109 for temperature control 2011-11-19 17:32:37 +01:00
Alessandro Ranellucci
4540f2377d Some minor fixes for the new bridging logic #58 2011-11-19 17:31:00 +01:00
Alessandro Ranellucci
a1c766cc52 New bridging logic, more robust. #58 2011-11-19 16:44:24 +01:00
Alessandro Ranellucci
1ef4d006a0 Treating "reverse bridges" as bridges should not change the way they're infilled or the chosen flow width 2011-11-18 09:54:28 +01:00
Alessandro Ranellucci
1a066caecc Compute bridge overlap as twice the total thickness of perimeters 2011-11-17 10:41:20 +01:00
Alessandro Ranellucci
c8ce989962 Renamed perimeter_offsets to perimeters 2011-11-17 10:38:23 +01:00
Alessandro Ranellucci
580f42c1de Use the same bridging logic for "reverse bridges" (top surfaces) 2011-11-17 10:34:40 +01:00
Alessandro Ranellucci
8aca717209 Print solid infill without cutting an internal surface under small regions such as pillars. #39 2011-11-16 16:35:20 +01:00
Alessandro Ranellucci
47c0da8110 Bugfix: some solid layers were skipped. #47 2011-11-16 14:53:30 +01:00
Alessandro Ranellucci
9ab81880c9 Throw a fatal exception if no layers are detected 2011-11-16 10:26:47 +01:00
Alessandro Ranellucci
55f00fdb35 Little refactoring, removing useless methods 2011-11-16 10:16:01 +01:00
Alessandro Ranellucci
2abd8fe240 Bugfix: bottom layer speed settings were ignored. 2011-11-15 12:02:31 +01:00
Alessandro Ranellucci
e65349469b Disable M104 if temperature is 0 2011-11-15 12:00:09 +01:00
Alessandro Ranellucci
9e42158582 Remove G92 E0 if --no-extrusion was supplied 2011-11-14 18:14:12 +01:00
Alessandro Ranellucci
e51310e1b0 Moved print settings to first tab 2011-11-14 17:21:44 +01:00
Alessandro Ranellucci
612b2e6ded Slic3r::Fill::PlanePath was not explicitely included, puzzling the packager 2011-11-14 15:23:17 +01:00
Alessandro Ranellucci
c2a2d9ae6d Combine Z changes and retractions using G0. #51 2011-11-14 12:45:20 +01:00
Alessandro Ranellucci
db35faeabb New experimental --g0 option for fast retractions. #51 2011-11-14 12:15:32 +01:00
Alessandro Ranellucci
12b06b0ab0 Speed boost for new infill patterns. #20 2011-11-14 10:54:04 +01:00
Alessandro Ranellucci
86f3e4fcd2 Implemented a new "line" fill pattern. #20 2011-11-14 10:31:07 +01:00
Alessandro Ranellucci
d47a7bebbc Display current version in GUI 2011-11-13 22:57:58 +01:00
Alessandro Ranellucci
60f6ce363e GUI text boxes for start/end GCODE. #12 2011-11-13 22:48:21 +01:00
Alessandro Ranellucci
b2f0f85d96 Reorganized GUI with tabs 2011-11-13 22:22:34 +01:00
Alessandro Ranellucci
8f32ee8f5a Bugfix: recent changes broke the "Infill every N layers" feature 2011-11-13 21:46:32 +01:00
Alessandro Ranellucci
ba1b59f54c New --close-after-slicing option to allow for easy integration with Pronterface 2011-11-13 20:45:15 +01:00
Alessandro Ranellucci
a10d13120c Better toolpaths for infills with different density 2011-11-13 20:22:44 +01:00
Alessandro Ranellucci
fe9ed84f64 Infill is now overlapped with perimeters by 15%. #19 2011-11-13 19:25:15 +01:00
Alessandro Ranellucci
75a71a23a5 New --first-layer-height-ratio option. #36 2011-11-13 19:08:19 +01:00
Alessandro Ranellucci
097b8d9acb New --skirt-height option. #11 2011-11-13 18:41:12 +01:00
Alessandro Ranellucci
b123194522 New --no-extrusion option to disable E values 2011-11-13 18:26:31 +01:00
Alessandro Ranellucci
76dfda3b09 Comment for M104 was erroneously saying that it would wait for temperature. #49 2011-11-13 18:22:33 +01:00
Alessandro Ranellucci
a2b4f9f671 Use nozzle diameter as flow width when bridging 2011-11-13 18:21:25 +01:00
Alessandro Ranellucci
038caddcda New fill types (hilbertcurve, archimedeanchords, octagramspiral) and ability to use different patterns for solid layers. #20 2011-11-13 18:14:02 +01:00
Alessandro Ranellucci
041e9877a3 Bugfix: parsing fatal error on Windows. #38 2011-11-12 11:57:22 +01:00
Alessandro Ranellucci
a13e4c6fb5 Detect membranes (solid parts generating both a bottom and a top surface on the same layers) and don't infill twice. #28 2011-11-12 11:05:32 +01:00
Alessandro Ranellucci
c5d5e4d244 Cleanup lines resulting from plane intersection before detecting polygons. This allows for more tolerance with dirty models. Performance impact depends on how many layers are detected as dirty. #16 #28 2011-11-12 10:18:20 +01:00
Alessandro Ranellucci
fec816b065 Collect undetected lines (caused by dirty or non-manifold models), warn the user, post debug info. Includes some further ExPolygon refactoring. 2011-11-11 10:21:48 +01:00
Alessandro Ranellucci
91e250a2fd Infill solid layers even when --fill-density is set to zero. #37 2011-11-09 09:21:09 +01:00
Alessandro Ranellucci
80adbb7044 Support for legacy multiply options in config files. #7 2011-11-07 17:16:34 +01:00
Alessandro Ranellucci
0b42139e54 Print first layer at Z = 1 * layer_height instead of zero like it was until now. #17 2011-11-07 16:04:27 +01:00
Alessandro Ranellucci
b4e268efad New --retract-lift option to lift Z while doing travel moves. #25 2011-11-07 15:58:47 +01:00
Alessandro Ranellucci
71a44e253c Renamed "multiply" to "duplicate". #7 2011-11-07 15:49:07 +01:00
Alessandro Ranellucci
279bfbb10d Organize perimeters with a nearest point search to avoid unnecessary travel moves. #21 2011-11-07 15:40:09 +01:00
Alessandro Ranellucci
e860254780 Do all perimeters for each island/object at once without moving between multiple objects. #34 2011-11-07 14:25:36 +01:00
Alessandro Ranellucci
d620b46beb Bugfix: arcs now work (some glitches in detecting their center, though). #30 2011-11-07 14:12:07 +01:00
Alessandro Ranellucci
8172bcb772 Bugfix: G2/G3 I and J coordinates were wrong. #30 2011-11-06 20:24:42 +01:00
Alessandro Ranellucci
b5ca83abf8 Enforce the requirement for recent versions of Wx and Math::ConvexHull. #27 2011-11-05 18:19:35 +01:00
Alessandro Ranellucci
6d6533831e New experimental --gcode-arcs options to generate G2/G3 commands. #23 2011-10-28 14:13:44 +02:00
Alessandro Ranellucci
7f341cfcd3 New --fill-every-layers option to get high accuracy on external surfaces while speeding up infill 2011-10-18 15:57:53 +02:00
Alessandro Ranellucci
54cc6216a1 Bugfix: extrusion distance wasn't reset at print start, causing a possible huge retraction. 2011-10-17 21:38:41 +02:00
Alessandro Ranellucci
5090ae561c Refactored Perimeter code with new Slic3r::Polygon and Slic3r::ExPolygon objects 
Large refactoring. Speed gains. Removed convex hull for bridges.
 2011-10-15 21:14:13 +02:00
Alessandro Ranellucci
2d784fac9b New --start-gcode and --end-gcode options. #12 2011-10-14 16:24:55 +02:00
Alessandro Ranellucci
f7335b6d1e Bugfix: latest retraction changes broke retraction 2011-10-14 12:14:20 +02:00
Alessandro Ranellucci
56619871b2 Bugfix: some bridges had wrong perimeters inside 2011-10-13 22:22:45 +02:00
Alessandro Ranellucci
c97a89c07c Refactored Line objects to arrayrefs 2011-10-12 16:27:40 +02:00
Alessandro Ranellucci
e410410dc7 Refactoring. Point objects are now plain arrayrefs. Slicing is 30% faster. 2011-10-12 14:54:49 +02:00
Alessandro Ranellucci
774717c8bb Implement our own STL relaxed parser to be tolerant with malformed STL files and remove a dependency 2011-10-12 10:47:26 +02:00
Alessandro Ranellucci
a65befe08c Require Math::Clipper 1.02 otherwise fail with a hard error 
This is to force people to upgrade their dependencies in order to avoid their previous bugs
 2011-10-11 17:56:56 +02:00
Alessandro Ranellucci
82d8d0896f Reset extrusion distance during retracts 2011-10-11 17:53:50 +02:00
Alessandro Ranellucci
ef485e511e Remove useless F params to shrink gcode size (#14) and Reset E before exceeding 65535 (#13) 2011-10-11 16:04:50 +02:00
Alessandro Ranellucci
f01ddae974 Some compatibility bugs. Slic3r will still fail hard with non-manifold objects 2011-10-11 15:51:08 +02:00
Alessandro Ranellucci
bca3abb755 More fixes. 2011-10-10 17:27:00 +02:00
Alessandro Ranellucci
34681af6ae Improvements for bottom and top surfaces perimeters 2011-10-10 16:31:37 +02:00
Alessandro Ranellucci
a7d5e643ae Bugfix: couldn't set fill density to zero 2011-10-10 14:37:40 +02:00
Alessandro Ranellucci
332d55f854 Moved Temperature under filament options 2011-10-09 22:29:13 +02:00
Alessandro Ranellucci
84abd41cf4 Fixes for bridges 2011-10-09 22:18:06 +02:00
Alessandro Ranellucci
459577f9a2 Completely rewritten the slicing algorithm 
It should work with any model now. There are still problems with some
bridges.
 2011-10-09 19:47:21 +02:00
Alessandro Ranellucci
ad27f25c71 Skeining algorithm totally rewritten 2011-10-08 19:02:05 +02:00
Alessandro Ranellucci
3274f3978b Additions to Geometry.pm and allow function exporting 2011-10-07 21:19:18 +02:00
Alessandro Ranellucci
743f2abcf2 Detection of optimal infill direction for bridges. Includes many fixes and improvements. 2011-10-07 19:07:57 +02:00
Alessandro Ranellucci
1cb515a8e5 Merge branch 'high-res-perimeters' 
Conflicts:
	lib/Slic3r/Extruder.pm
 2011-10-06 20:09:50 +02:00
Alessandro Ranellucci
5daaf454b1 Faster algorithm for rectilinear fill 2011-10-06 17:13:42 +02:00
Alessandro Ranellucci
119eb0693f New high_res_perimeters option (like the "Skin" plugin for Skeinforge) 2011-10-06 17:11:59 +02:00
Alessandro Ranellucci
1978a99416 Faster algorithm for rectilinear fill 2011-10-06 16:22:22 +02:00
Alessandro Ranellucci
33d7b8c7cf Code refactored to allow for multiple infill types 2011-10-06 15:13:09 +02:00
Alessandro Ranellucci
bfd1d0e1dd Got rid of Math::Geometry::Planar 2011-10-06 12:39:58 +02:00
Alessandro Ranellucci
e2d2574b8b New algorithm for clipping lines to complex polygons 2011-10-06 12:20:25 +02:00
Alessandro Ranellucci
5812804d6b Refactored the can_connect() logic (includes a refactoring of the SVG library) 2011-10-06 11:55:26 +02:00
Alessandro Ranellucci
5a07137def Fixes to retraction and skirt 2011-10-05 21:25:17 +02:00
Alessandro Ranellucci
a1d518f1a2 Save and load configurations 2011-10-05 18:13:47 +02:00
Alessandro Ranellucci
92dec2db2a Fixed detection of horizontal shells 2011-10-04 22:36:05 +02:00
Alessandro Ranellucci
2da5ee7448 Bugfixes and improvements in surface detection 2011-10-04 22:27:45 +02:00
Alessandro Ranellucci
f1a36502e1 Additions to the polygon library 2011-10-04 20:06:17 +02:00
Alessandro Ranellucci
706586f150 Allow .STL files as well as .stl 2011-10-04 18:00:01 +02:00
Alessandro Ranellucci
794b7a99d2 Fixes for hi-res STL models 2011-10-04 17:55:55 +02:00
Alessandro Ranellucci
6444c3d7a9 Bugfix in dealing with very small STL facets 2011-10-03 20:57:56 +02:00
Alessandro Ranellucci
ef201a99cc Bugfix in polyline simplification 2011-10-03 20:40:49 +02:00
Alessandro Ranellucci
865e234a44 Workaround for Wx/GTK bug on Linux 2011-10-03 19:15:07 +02:00
Alessandro Ranellucci
71a373e437 Bugfix: error during skein freezed the GUI 2011-10-03 17:41:45 +02:00
Alessandro Ranellucci
558e86e72d GUI fixes for Windows 2011-10-03 13:08:43 +02:00
Alessandro Ranellucci
f2f9178e07 GUI 2011-10-03 11:55:32 +02:00
Alessandro Ranellucci
21d287504c New --perimeter-feed-rate and --retract-before-travel options. Includes some refactoring and fixes. 2011-10-02 09:57:37 +02:00
Alessandro Ranellucci
55f2247cd9 New extrusion math 2011-10-01 18:10:33 +02:00
Alessandro Ranellucci
ea88cad8e3 Don't extrude acute angles 2011-10-01 14:26:54 +02:00
Alessandro Ranellucci
25ea8a0204 Bugfixes for complex and dirty geometries 2011-09-30 15:46:48 +02:00
Alessandro Ranellucci
b61b543243 Minor cleanups 2011-09-26 19:53:01 +02:00
Alessandro Ranellucci
81085433fd New options to multiply input object 2011-09-26 16:58:08 +02:00
Alessandro Ranellucci
c16ecb4316 Fixed regression which prevented horizontal shells to be processed for external top surfaces 2011-09-26 16:19:32 +02:00
Alessandro Ranellucci
404c76adc8 New option to rotate input object 2011-09-26 16:07:12 +02:00
Alessandro Ranellucci
8d13d4b21e New option to shift Z coordinates 2011-09-26 15:59:03 +02:00
Alessandro Ranellucci
b0433097d4 New option to customize infill angle 2011-09-26 15:51:22 +02:00
Alessandro Ranellucci
742f646372 Minor fixes to time computation and right-hand rule 2011-09-26 15:08:05 +02:00
Alessandro Ranellucci
478047fad3 Fixes and improvements after testing with more complex objects 2011-09-26 14:48:22 +02:00
Alessandro Ranellucci
bfad101c8c Ability to scale input object 2011-09-26 12:07:29 +02:00
Alessandro Ranellucci
c2a62891da Remove features that are too small to be printed 2011-09-26 11:59:06 +02:00
Alessandro Ranellucci
081f65852d Refactor extrusion logic in a dedicated class 2011-09-26 11:42:08 +02:00
Alessandro Ranellucci
415d1a5170 Optimization of travel paths for fills 2011-09-26 10:52:58 +02:00
Alessandro Ranellucci
0cd10441a1 Optimization of travel paths for perimeters 2011-09-25 23:15:45 +02:00
Alessandro Ranellucci
03341f3485 Multiple solid layers near external surfaces 2011-09-25 22:11:56 +02:00
Alessandro Ranellucci
f892fde123 Make rounded corners for skirt 2011-09-25 20:24:14 +02:00
Alessandro Ranellucci
5fec13353c Use latest Math::Clipper updated to Clipper 4.4.4 to get sharp corners 2011-09-25 20:09:30 +02:00
Alessandro Ranellucci
f48dec9e41 Remove old code 2011-09-25 19:51:03 +02:00
Alessandro Ranellucci
18c7aef1a7 Lots of changes and refactoring after testing with hollow objects 2011-09-18 19:28:12 +02:00
Alessandro Ranellucci
26b05ab155 Replaced Moose with Moo => big performance boost and easier packaging 2011-09-06 11:50:43 +02:00
Alessandro Ranellucci
3421e8fef8 Improvements to avoid blobs 2011-09-05 20:29:07 +02:00
Alessandro Ranellucci
ff5044c031 Implemented skirt 2011-09-05 20:00:59 +02:00
Alessandro Ranellucci
d8b848a67f Implemented retraction and fixed extrusion math 2011-09-05 18:52:09 +02:00
Alessandro Ranellucci
5595839b31 Command line interface 2011-09-05 13:33:09 +02:00
Alessandro Ranellucci
778e4f6ffa Allow for different speed on bottom layer 2011-09-05 12:22:54 +02:00
Alessandro Ranellucci
9e111d0a6d Rectilinear fill 2011-09-05 12:21:27 +02:00
Alessandro Ranellucci
428006264d Generate boundaries of areas to fill (includes some refactoring) 2011-09-04 12:04:01 +02:00
Alessandro Ranellucci
416ad241ea Require at least one perimeter 2011-09-04 11:06:15 +02:00
Alessandro Ranellucci
a5ba0af7ef Generate GCODE 2011-09-03 20:47:38 +02:00
Alessandro Ranellucci
74b4d8d612 Bugfix (harmless for now) in calculation of extents; using constants now for code readability 2011-09-03 20:08:48 +02:00
Alessandro Ranellucci
febd655e22 Extrusion of perimeters 2011-09-02 21:10:20 +02:00
Alessandro Ranellucci
55a523e1fa Initial import 2011-09-01 21:06:28 +02:00